BIS - LIMS (Laboratory Information Management System)

Nemko India (Test Lab) Pvt. Ltd.

Plot No 193, Sector 68, IMT Faridabad, Faridabad, Faridabad, Haryana, 121004

9810629447 satish.sankhyan@nemko.com

Scope List

Reset

10 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	2000	10% (Discount offered to BIS)
6(Classification)	-	0	--
5(General conditions for the tests)	-	0	--
11.8(Temperature rise)	-	5000	10% (Discount offered to BIS)
11.7(Duration corresponding)	-	0	Refer cl. no. 11.8
11.6(Combined appliances)	-	0	Refer cl. no. 11.8
11.5(Motor-operated appliances)	-	0	Refer cl. no. 11.8
11.4(Heating appliances)	-	0	Refer cl. no. 11.8
8.1.5(Live parts of built-in appliances)	-	2000	10% (Discount offered to BIS)
17(Overload protection of transformers and associated circuits)	-	2000	10% (Discount offered to BIS)
16(Leakage current and electric strength)	-	3000	10% (Discount offered to BIS)
4(General requirement)	-	0	--
31(Resistance to Rusting)	-	2000	10% (Discount offered to BIS)
30.2(Needle Flame Test)	-	3000	10% (Discount offered to BIS)
30.2(Glow Wire Test)	-	3000	10% (Discount offered to BIS)
30.1(Ball pressure test)	-	2000	10% (Discount offered to BIS)
29(clearance, creepage distances and solid insulation)	-	3000	10% (Discount offered to BIS)
28(Screw test and connections)	-	2000	10% (Discount offered to BIS)
27(Provision for earthing)	-	2000	10% (Discount offered to BIS)
26(Terminals for external conductors)	-	2000	10% (Discount offered to BIS)
25(Supply connection and external flexible cords)	-	2000	10% (Discount offered to BIS)
23(Internal wiring)	-	2000	10% (Discount offered to BIS)
22(Construction)	-	2000	10% (Discount offered to BIS)
21(Mechanical Strength)	-	2000	10% (Discount offered to BIS)
20(Stability and mechanical hazards)	-	2000	10% (Discount offered to BIS)
19(Abnormal Operation)	-	5000	10% (Discount offered to BIS)
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Refer cl. no. 16
16.2(Leakage Current (after Clause 15))	-	0	Refer cl. no. 16
16.1(General)	-	0	Refer cl. no. 16
16.0(General)	-	0	Refer cl. no. 16
15.3(Humidity Test)	-	0	Refer cl. no. 15.0
15.2(Spillage Test)	-	0	Refer cl. no. 15.0
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Refer cl. no. 15.0
15.0(Moisture resistance)	-	10000	10% (Discount offered to BIS)
14(Transient Over Voltages)	-	2000	10% (Discount offered to BIS)
13.3(Electric Strength at operating temperature)	-	0	Refer cl. no. 13
13.2(Leakage current at operating temperature)	-	0	Refer cl. no. 13
13(Leakage current and electric strength at operating temperature)	-	2000	10% (Discount offered to BIS)
11.3(Heating)	-	0	Refer cl. no. 11.8
11.2(General)	-	0	Refer cl. no. 11.8
11.1(General)	-	0	Refer cl. no. 11.8
10.2(Current input)	-	5000	10% (Discount offered to BIS)
10.1(Power input)	-	0	Refer cl. no. 10.2
8.1.4(Protection against live parts against protective impedance)	-	0	Refer cl. no. 8.1.1.
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Refer cl. no. 8.1.1.
8.1.2(Protection against live parts in openings)	-	0	Refer cl. no. 8.1.1.
8.1.1(Protection against live parts in all positions)	-	2000	10% (Discount offered to BIS)
7(Marking and instructions)	-	1000	10% (Discount offered to BIS)
A.2(Earth continuity test)	-	2000	10% (Discount offered to BIS)
Annex C(Ageing test on motors)	-	2000	10% (Discount offered to BIS)
Annex D(Thermal motor protectors)	-	2000	10% (Discount offered to BIS)
15.2(Moisture resistance)	-	0	Refer cl. no.: 15.0
19.17(Abnormal operation)	-	0	Refer cl. no.: 19
20.1(Stability and mechanical hazards)	-	0	Refer cl. no.: 20
21.2(Mechanical strength)	-	0	Refer cl. no.: 21
21.3(Mechanical strength)	-	0	Refer cl. no.: 21
22.5(Construction)	-	0	Refer cl. no.: 22
22.6(Construction)	-	0	Refer cl. no.: 22
22.11(Construction)	-	0	Refer cl. no.: 22
22.42(Construction)	-	0	Refer cl. no.: 22
23.3(Internal wiring)	-	0	Refer cl. no.: 23
25(Supply connection and external flexible cords)	-	0	Repeated clause.
25.7(Supply connection and external flexible cords)	-	0	Refer cl. no.: 25
25.14(Supply connection and external flexible cords)	-	0	Refer cl. no.: 25
25.15(Supply connection and external flexible cords)	-	0	Refer cl. no.: 25
26.5(Terminals for external conductors)	-	0	Refer cl. no.: 26
27.5(Provision for earthing)	-	0	Refer cl. no.: 27
28.1(Screws and connections)	-	0	Refer cl. no.: 28
B.22.1(Construction)	-	2000	10% (Discount offered to BIS)
B.22.3(Construction)	-	0	Refer cl. no. B.22.1
B.22.4(Construction)	-	0	Refer cl. no. B.22.1
B.22.5(Construction)	-	0	Refer cl. no. B.22.1
19.11.4.6(Class 3 Voltage dips and interruptions)	-	20000	10% (Discount offered to BIS)
19.11.4.5(Immunity to conducted discharges)	-	20000	10% (Discount offered to BIS)
19.11.4.4(Surge immunity test)	-	15000	10% (Discount offered to BIS)
19.11.4.3(Fast transient bursts)	-	15000	10% (Discount offered to BIS)
19.11.4.2(Radiated fields)	-	40000	10% (Discount offered to BIS)
19.11.4.1(Electrostatic discharges)	-	20000	10% (Discount offered to BIS)
18(Endurance)	-	1000	10% (Discount offered to BIS)
17(Over Load Protection of Transformers and associated circuits)	-	0	Repeated clause.
18(Endurance)	-	0	Repeated clause.
9(Starting of motor operation test requirements and tests)	-	1000	10% (Discount offered to BIS)
12(Charging of metal-ion batteries)	-	-	-
6(Classification)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27(Provision for earthing)	-	-	-
26(Terminals for external conductors)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
23(Internal wiring)	-	-	-
22(Construction)	-	-	-
21(Mechanical Strength)	-	-	-
20(Stability and mechanical hazards)	-	-	-
19(Abnormal Operation)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal operation)	-	-	-
20.1(Stability and mechanical hazards)	-	-	-
21.2(Mechanical strength)	-	-	-
21.3(Mechanical strength)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction)	-	-	-
22.11(Construction)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal wiring)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
25.7(Supply connection and external flexible cords)	-	-	-
25.14(Supply connection and external flexible cords)	-	-	-
25.15(Supply connection and external flexible cords)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for earthing)	-	-	-
28.1(Screws and connections)	-	-	-
B.22.1(Construction)	-	-	-
B.22.3(Construction)	-	-	-
B.22.4(Construction)	-	-	-
B.22.5(Construction)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.5(Immunity to conducted discharges)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.2(Radiated fields)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
18(Endurance)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-

Complete

31 Dec, 2026

-
Included w.e.f 25.03.2025 Exclusion Cl 19.11.4.7 , Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards), Cl. 22.16, Cord reels test, Cl. 22.32, Oxygen bomb test

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	25000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS
5.1(Inputting of text)	-	25000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS

Complete

31 Dec, 2026

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

150000 View breakup
Earphone=Rs. 75000/-, Musical System=Rs. 120000/-, TV=Rs. 130000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	4500	Cl. 5 : Marking and instructions
6(Hazardous radiations)	-	0	Qualitative Test
7(Heating under normal operating conditions)	-	12000	Cl. 7 : Heating under normal operating condition
8(Constructional requirements with regard to the protection against electric shock)	-	7500	Cl. 8 : Construction requirments with regard to the protection against electric shock
9(Electric shock hazard under normal operating conditions)	-	15000	Cl. 9 : "Electric shock hazard under normal operating conditions"
10(Insulation requirements)	-	18000	Cl. 10 : Insulation requirments
11(Fault conditions)	-	24000	Cl. 11 : Fault conditions
12(Mechanical strength)	-	19500	Cl. 12 : Mechanical Strength
13(CLEARANCES and CREEPAGE DISTANCES)	-	12000	Cl. 13 : clearance and creepage distances
14(Components)	-	0	Qualitative Test
15(TERMINALS)	-	3000	Cl. 15 : Terminals
16(External flexible cords)	-	7500	Cl. 16 : External flexible cord
17(Electrical connections and mechanical fixings)	-	3000	Cl. 17 : Electrical connection and mechanical fixings
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	Qualitative Test
19(Stability and mechanical hazards)	-	7500	Cl. 19 : Stability and mechanical hazards
20(Resistance to fire)	-	15000	Cl. 20 : Resistance to fire
3(General requirements)	-	0	N/A
4(General test conditions)	-	0	N/A
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	N/A
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	N/A
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	N/A
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	N/A

Complete

31 Dec, 2026

-
Exclusion: Cl. 6 (Hazardous radiations), Cl. 8 (Constructional requirements with regard to the protection against electric shock), Cl. 14 (Components), Cl. 16 (External flexible cords), Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Annex-L (Additional requirements for electronic flash apparatus for photographic purposes), Cl. 8.16 Requirements for insulated winding wires for use without additional interleaved insulation , Cl. 8.17 Endurance test for wound components with insulated winding wires without additional interleaved insulation, Cl. 16.1 MAINS supply flexible cords, Cl. 16.3 (b) Cord Bending test

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

124000 View breakup
Keyboard=Rs. 75000/-, ATM=Rs. 135000/-, USB Type HDD=Rs. 90000/-, USB Type SDD=Rs. 90000/-, SMPS=Rs. 90000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2000	10% (Discount offered to BIS)
1.6(Power interface .)	-	1000	10% (Discount offered to BIS)
1.7(Markings and instructions)	-	3200	10% (Discount offered to BIS)
2.1(Protection from electric shock and energy hazards)	-	8500	10% (Discount offered to BIS)
2.2(SELV circuits)	-	4000	10% (Discount offered to BIS)
2.3(TNV circuits)	-	3500	10% (Discount offered to BIS)
2.4(Limited current circuits)	-	3500	10% (Discount offered to BIS)
2.5(Limited power sources .)	-	4500	10% (Discount offered to BIS)
2.6(Provisions for earthing and bonding)	-	3600	10% (Discount offered to BIS)
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	10% (Discount offered to BIS)
2.8(Safety interlocks)	-	2000	10% (Discount offered to BIS)
2.9(Electrical insulation)	-	3000	10% (Discount offered to BIS)
2.10(Clearances, creepage distances and distances through insulation)	-	22000	10% (Discount offered to BIS)
3.1(General)	-	1000	10% (Discount offered to BIS)
3.2(Connection to a mains supply)	-	2200	10% (Discount offered to BIS)
3.3(Wiring terminals for connection of external conductors)	-	1000	10% (Discount offered to BIS)
3.4(Disconnection from the mains supply)	-	1000	10% (Discount offered to BIS)
3.5(Interconnection of equipment)	-	1000	10% (Discount offered to BIS)
4.1(Stability)	-	3000	10% (Discount offered to BIS)
4.2(Mechanical strength)	-	3600	10% (Discount offered to BIS)
4.3(Design and construction)	-	2000	10% (Discount offered to BIS)
4.4(Protection against hazardous moving parts)	-	2000	10% (Discount offered to BIS)
4.5(Thermal requirements)	-	4000	10% (Discount offered to BIS)
4.6(Openings in enclosures)	-	2000	10% (Discount offered to BIS)
4.7(Resistance to fire)	-	2000	10% (Discount offered to BIS)
5.1(Touch current and protective conductor curren)	-	8000	10% (Discount offered to BIS)
5.2(Electric strength)	-	12500	10% (Discount offered to BIS)
5.3(Abnormal operating and fault conditions)	-	10500	10% (Discount offered to BIS)
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	10% (Discount offered to BIS)
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2200	10% (Discount offered to BIS)
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	10% (Discount offered to BIS)
7.1(General)	-	1500	10% (Discount offered to BIS)
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1700	10% (Discount offered to BIS)
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1500	10% (Discount offered to BIS)
7.4(Insulation between primary circuits and cable distribution systems)	-	1500	10% (Discount offered to BIS)

Complete

31 Dec, 2026

-
Exclusion: Cl. 2.6 (Provisions for earthing and bonding), Cl. 2.8 (Safety interlocks), Cl. 2.10 (Clearances, creepage distances and distances through insulation), Cl. 3.1 (General), Cl. 3.2 (Connection to a mains supply), Cl. 4.2 (Mechanical strength), Cl. 4.3 (Design and construction), 5.3 (Abnormal operating and fault conditions), Cl.1.5 (Components), Annex U (Insulating winding wires for use without interleaved insulation), Annex CC (Evaluation of integrated circuit (IC) current limiters), Cl. Cl. 2.6.3.3 (Size of protective bonding conductors), Cl. Cl. 2.8.5 (Moving parts & Cl.2.8.7 Switches & Relays), Cl. 2.10.5.4 (Semiconductor Devices), Cl. 2.10.5.11 (Insulation in wound components), Cl. 2.10.5.12 (wire in wound components), Cl. 2.10.5.13 (wire with solvent based enamel in wound component), Cl. 2.10.5.14 (Additional insulation in wound components), Cl. 2.10.11 (Test for semiconductor devices and for cemented joints), Cl. 2.10.12 (Enclosed and sealed parts), Cl. 3.1.4 Insulation of conductors, Cl.3.2.5.1 Power supply cords, Cl.4.2.8 Cathode Ray Tubes, Cl. 4.2.9 High pressure lamp, Cl. 4.3.10 liquids and gases, Cl. 4.3.11 Containers for liquids or gas, Cl.4.3.12 Flammable liquids, Cl.4.3.13.2 Ionizing Radiation, Cl.4.3.13.3 Effect of ultraviolet (UV) radiation on materials, Cl.4.3.13.4 Human exposure to ultraviolet (UV) radiation, Cl. 4.3.13.5. Lasers including LED, Cl.4.3.13.6 Other Types of radiation, Cl. 5.3.5 Electromechanical components, Cl. 5.3.8 Unattended equipment

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

LED BULB

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	10% discount to BIS
6(Interchangeability)	-	1000	10% discount to BIS
7(Protection against accidental contact with live parts)	-	4000	10% discount to BIS
8(Insulation Resistance and Electric Strength)	-	7000	10% discount to BIS
9(MECHANICAL STRENGTH)	-	5000	10% discount to BIS
10(cap temperature)	-	4000	10% discount to BIS
11(Resistance to Heat)	-	4000	10% discount to BIS
12(Resistance to Flame and Ignition)	-	2000	10% discount to BIS
14(Creepage distance and clearances)	-	500	10% discount to BIS
13(Fault conditions)	-	1000	10% discount to BIS
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	0	N/A

Complete

31 Dec, 2026

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

Secondary Batteries and Cells (Lithium Systems)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	N/A
5(General Safety Considerations)	-	0	N/A
5.1(General)	-	0	N/A
5.2(Insulation and Wiring)	-	5000	N/A
5.3(Venting)	-	0	N/A
5.4(Temperature, Voltage and Current Management)	-	0	N/A
5.5(Terminal Contacts)	-	0	N/A
5.6(Assembly of Cells into batteries)	-	0	N/A
5.7(Quality Plan)	-	0	N/A
5.8(Battery Safety Components)	-	0	N/A
6(Type Test and Sample Size)	-	0	N/A
7(Specific requirements and tests)	-	0	N/A
7.1(Charging procedure for test purposes)	-	32000	Cl. 7.1.1 (18000 INR); Cl.7.1.2 (14000 INR)
7.2(Intended Use)	-	32000	Cl. 7.2.1 (22000 INR); Cl.7.2.2 (10000 INR)
7.3(Reasonably foreseeable misuse)	-	112000	Cl. 7.3.1 (15000 INR); Cl.7.3.2 (14000 INR); Cl.7.3.3 (7000 INR); Cl.7.3.4 (11000 INR); Cl.7.3.5 (11000 INR); Cl.7.3.6 (13000 INR); Cl.7.3.7 (12000 INR); Cl.7.3.8.1 (17000 INR); Cl.7.3.8.2 (12000 INR)
8(Information for safety)	-	0	N/A
8.1(General)	-	0	N/A
8.2(Small Cell and battery safety information)	-	0	N/A
9(Marking)	-	0	N/A
9.1(Cell Marking)	-	0	N/A
9.2(Battery Marking)	-	0	N/A
9.3(Caution for ingestion of small cells and batteries)	-	0	N/A
9.4(Other information)	-	0	N/A
10(Packaging)	-	0	N/A

Complete

31 Dec, 2026

-
-

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries (Nickel Systems)

159000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	N/A
5(General Safety Considerations)	-	0	N/A
5.1(General)	-	0	N/A
5.2(Insulation and Wiring)	-	5000	IR Test
5.3(Venting)	-	0	N/A
5.4(Temperature, Voltage and Current Management)	-	0	N/A
5.5(Terminal Contacts)	-	0	N/A
5.6(Assembly of Cells into batteries)	-	0	N/A
5.7(Quality Plan)	-	0	N/A
6(Tyoe Test amd Sample Size)	-	0	N/A
7(Specific requirements and tests)	-	0	N/A
7.1(Charging procedure for test purposes)	-	19000	Charging and Discharging
7.2(Intended Use)	-	48000	7.2.1(INR18000) 7.2.2(INR13000) 7.2.4(INR17000)
7.3(Reasonably foreseeable misuse)	-	92000	7.3.1(INR7000) 7.3.2(INR14000) 7.3.3(INR7000) 7.3.4(INR11000) 7.3.5(INR9000) 7.3.6(INR10000) 7.3.7(INR12000) 7.3.8(INR14000) 7.3.9(INR8000)
8(Information for safety)	-	0	N/A
8.1(General)	-	0	N/A
8.2(Small Cell and battery safety information)	-	0	N/A
9(Marking)	-	0	N/A
9.1(Cell Marking)	-	0	N/A
9.2(Battery Marking)	-	0	N/A
9.3(Caution for ingestion of small cells and batteries)	-	0	N/A
9.4(Other information)	-	0	N/A
10(Packaging)	-	0	N/A

Complete

31 Dec, 2026

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

CONTROLGEAR

42000 View breakup
Rs.42,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	10% discount to BIS
8(Protection against accidental contact with live parts)	-	4000	10% discount to BIS
9(Terminals)	-	3000	10% discount to BIS
10(PROVISION FOR EARTHING)	-	2000	10% discount to BIS
11(MOISTURE RESISTANCE)	-	6000	10% discount to BIS
12(Electric Strength)	-	2500	10% discount to BIS
16(Construction)	-	500	10% discount to BIS
17(Creepage distance and clearances)	-	3000	10% discount to BIS
18(Screws, current carrying parts and connections)	-	1500	10% discount to BIS
19(Resistance to heat, fire and tracking)	-	6000	10% discount to BIS
20(Resistance to corrosion)	-	1000	10% discount to BIS
14(Fault conditions)	-	6000	10% discount to BIS
15(Transformer heating)	-	6000	10% discount to BIS
4(GENERAL REQUIREMENTS)	-	0	N/A
5(GENERAL NOTES ON TESTS)	-	0	N/A
6(CLASSIFICATION)	-	0	N/A

Complete

31 Dec, 2026

-
Exclusion: Cl. 16 (Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors, Inductor, MOV/VDR, Fuse, Internal wire, Opto-coupler, EMI/EMC filter, SMPS/Mains Transformer, PCB material, Insulated tape, Heat shrinkage sleeve, LED, Winding wire

IS 13450 : Part 1 : SEC 2 (2018)

Medical electrical equipment: Part 1 general requirements for the basic safety and essential performance: Sec 2 collateral standard: electromagnetic disturbances - Requirements and tests (First Revision)

248000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS)	-	0	-
4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS)	-	0	-
4.2(Non-ME EQUIPMENT used in an ME SYSTEM)	-	0	-
4.3(General test conditions)	-	0	-
5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents)	-	0	-
6(Documentation of the tests)	-	0	-
7.1(Protection of radio services and other equipment)	-	60000	-
7.2(Protection of the PUBLIC MAINS NETWORK)	-	30000	-
8.1(General)	-	0	-
8.2(PATIENT physiological simulation)	-	0	-
8.3(Termination of PATIENT-COUPLED parts)	-	0	-
8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD)	-	0	-
8.5(Subsystems)	-	0	-
8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS)	-	0	-
8.7(Operating modes)	-	0	-
8.9(IMMUNITY TEST LEVELS)	-	0	-
8.10(IMMUNITY to proximity fields from RF wireless communications equipment)	-	10000	-
9(Test report)	-	0	-
Table 4(ELECTROSTATIC DISCHARGE)	-	6000	-
Table 4(Radiated RF EM fields)	-	30000	-
Table 4(Proximity fields from RF wireless communications equipment)	-	10000	-
Table 4(RATED power frequency magnetic fields d)e))	-	10000	-
Table 5(Electrical fast transients / bursts)	-	6000	-
Table 5(Surges line-to-line)	-	6000	-
Table 5(Surges line-to-ground)	-	6000	-
Table 6(Surges line-to-line)	-	6000	-
Table 6(Surges line-to-ground)	-	6000	-
Table 8(Surges line-to-ground)	-	6000	-
Table 5(Conducted disturbances induced by RF fields)	-	5000	-
Table 6(Conducted disturbances induced by RF fields)	-	5000	-
Table 7(Conducted disturbances induced by RF fields)	-	5000	-
Table 5(Voltage dips)	-	6000	-
Table 5(Voltage interruptions)	-	6000	-
Table 6(Electrical fast transients / bursts)	-	6000	-
Table 8(Electrical fast transients / bursts)	-	6000	-
Table 8(Conducted disturbances induced by RF fields)	-	5000	-
Table 7(ELECTROSTATIC DISCHARGE)	-	6000	-
Table 8(ELECTROSTATIC DISCHARGE)	-	6000	-
8.8(Non-ME EQUIPMENT)	-	0	-
4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS)	-	0	Repeated entry
4.2(Non-ME EQUIPMENT used in an ME SYSTEM)	-	0	Repeated entry
4.3(General test conditions)	-	0	Repeated entry
5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents)	-	0	Repeated entry
6(Documentation of the tests)	-	0	Repeated entry
7.1(Protection of radio services and other equipment)	-	0	Repeated entry
7.2(Protection of the PUBLIC MAINS NETWORK)	-	0	Repeated entry
8.1(General)	-	0	Repeated entry
8.2(PATIENT physiological simulation)	-	0	Repeated entry
8.3(Termination of PATIENT-COUPLED parts)	-	0	Repeated entry
8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD)	-	0	Repeated entry
8.5(Subsystems)	-	0	Repeated entry
8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS)	-	0	Repeated entry
8.7(Operating modes)	-	0	Repeated entry
8.9(IMMUNITY TEST LEVELS)	-	0	Repeated entry
8.10(IMMUNITY to proximity fields from RF wireless communications equipment)	-	0	Repeated entry
9(Test report)	-	0	Repeated entry
Table 4(ELECTROSTATIC DISCHARGE)	-	0	Repeated entry
Table 4(Radiated RF EM fields)	-	0	Repeated entry
Table 4(Proximity fields from RF wireless communications equipment)	-	0	Repeated entry
Table 4(RATED power frequency magnetic fields d)e))	-	0	Repeated entry
Table 5(Electrical fast transients / bursts)	-	0	Repeated entry
Table 5(Surges line-to-line)	-	0	Repeated entry
Table 5(Surges line-to-ground)	-	0	Repeated entry
Table 6(Surges line-to-line)	-	0	Repeated entry
Table 6(Surges line-to-ground)	-	0	Repeated entry
Table 8(Surges line-to-ground)	-	0	Repeated entry
Table 5(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 6(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 7(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 5(Voltage dips)	-	0	Repeated entry
Table 5(Voltage interruptions)	-	0	Repeated entry
Table 6(Electrical fast transients / bursts)	-	0	Repeated entry
Table 8(Electrical fast transients / bursts)	-	0	Repeated entry
Table 8(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 7(ELECTROSTATIC DISCHARGE)	-	0	Repeated entry
Table 8(ELECTROSTATIC DISCHARGE)	-	0	Repeated entry
8.8(Non-ME EQUIPMENT)	-	0	Repeated entry
4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS)	-	0	Repeated entry
4.2(Non-ME EQUIPMENT used in an ME SYSTEM)	-	0	Repeated entry
4.3(General test conditions)	-	0	Repeated entry
5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents)	-	0	Repeated entry
6(Documentation of the tests)	-	0	Repeated entry
7.1(Protection of radio services and other equipment)	-	0	Repeated entry
7.2(Protection of the PUBLIC MAINS NETWORK)	-	0	Repeated entry
8.1(General)	-	0	Repeated entry
8.2(PATIENT physiological simulation)	-	0	Repeated entry
8.3(Termination of PATIENT-COUPLED parts)	-	0	Repeated entry
8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD)	-	0	Repeated entry
8.5(Subsystems)	-	0	Repeated entry
8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS)	-	0	Repeated entry
8.7(Operating modes)	-	0	Repeated entry
8.9(IMMUNITY TEST LEVELS)	-	0	Repeated entry
8.10(IMMUNITY to proximity fields from RF wireless communications equipment)	-	0	Repeated entry
9(Test report)	-	0	Repeated entry
Table 4(ELECTROSTATIC DISCHARGE)	-	0	Repeated entry
Table 4(Radiated RF EM fields)	-	0	Repeated entry
Table 4(Proximity fields from RF wireless communications equipment)	-	0	Repeated entry
Table 4(RATED power frequency magnetic fields d)e))	-	0	Repeated entry
Table 5(Electrical fast transients / bursts)	-	0	Repeated entry
Table 5(Surges line-to-line)	-	0	Repeated entry
Table 5(Surges line-to-ground)	-	0	Repeated entry
Table 6(Surges line-to-line)	-	0	Repeated entry
Table 6(Surges line-to-ground)	-	0	Repeated entry
Table 8(Surges line-to-ground)	-	0	Repeated entry
Table 5(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 6(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 7(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 5(Voltage dips)	-	0	Repeated entry
Table 5(Voltage interruptions)	-	0	Repeated entry
Table 6(Electrical fast transients / bursts)	-	0	Repeated entry
Table 8(Electrical fast transients / bursts)	-	0	Repeated entry
Table 8(Conducted disturbances induced by RF fields)	-	0	Repeated entry
Table 7(ELECTROSTATIC DISCHARGE)	-	0	Repeated entry
Table 8(ELECTROSTATIC DISCHARGE)	-	0	Repeated entry
8.8(Non-ME EQUIPMENT)	-	0	Repeated entry

Complete

31 Dec, 2026

-
Included w.e.f 12.03.2025 Exclusion: Table 6 (Electrical transient conduction along supply lines)

IS/IEC 62368 : Part 1 (2018)

Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	0	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	5000	10% discount to BIS
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	5000	10% discount to BIS
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	40000	10% discount to BIS
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	40000	10% discount to BIS
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	0	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	20000	10% discount to BIS
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	10000	10% discount to BIS
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	20000	10% discount to BIS
Annex. D, D.1, D.2, D.3(Test Generators)	-	0	-
Annex E, E.1, E.2, E.3(Test conditions)	-	10000	10% discount to BIS
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	5000	10% discount to BIS
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	0	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	0	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	10000	10% discount to BIS
Annex. O(Measurement of creepage distances and clearances)	-	0	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	0	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	0	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	0	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	0	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	0	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	0	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	0	-
Annex I(Overvoltage categories)	-	0	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	0	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	0	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	0	-
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	0	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	0	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	0	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	0	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	0	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	0	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	0	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	0	-
Annex E, E.1, E.2, E.3(Test conditions)	-	0	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	0	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	0	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	0	-
Annex. O(Measurement of creepage distances and clearances)	-	0	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	0	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	0	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	0	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	0	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	0	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	0	-
Annex I(Overvoltage categories)	-	0	-

Complete

31 Dec, 2026

-
Included.w.e.f.23.12.2024 Exclusion Cl.4.1.8 Tests for liquid filled components (LFC) Cl.4.1.8 Tests for liquid filled components (LFC) Cl. 4.4.5 Safety interlocks Cl. 4.10.2 Switches & Relays Cl 5.4.7 Tests for semiconductor components and for cemented joints Cl.5.5.4 Optocouplers Cl.5.5.6 Resistors Cl. 5.5.7 SPDs Cl.5.5.8 Insulation between the mains and an external circuit consisting of a coaxial cable wire in wound components Cl 8.5.5 High pressure lamps Annex G.1 Switches Annex G.2 Relays Annex G.3 Protective devices Annex G.5.3.4.6 Partial discharge tests. Annex G.6 Wire insulation Annex G.8 Varistors Annex G.9 integrated circuit(IC) current limiter Annex G.10 Resistors Annex G.11 Capacitors and RC units Annex G.15 Pressurized liquid filled components Annex J Insulated winding wires for use without interleaved insulation Annex K Safety interlocks Electrochemical potentials Annex Y Construction requirements for outdoor enclosures CL G.7.1: General Cl G.12: Optocouplers Cl G.14: Coatings on component terminals Cl: 7, Injury caused by hazardous substances Annex R: Limited short-circuit test Cl.10 Radiation Annex C UV radiation

Bureau of Indian Standards

The National Standards Body of India

Nemko India (Test Lab) Pvt. Ltd.

Plot No 193, Sector 68, IMT Faridabad, Faridabad, Faridabad, Haryana, 121004

9810629447 satish.sankhyan@nemko.com

Scope List