BIS - LIMS (Laboratory Information Management System)

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 info@nisst.org

Scope List

Reset

58 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION AVAILABLE

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9 (Dimensions & tolerances)()	-	500	-
Table-1,(Clauses 5.1 and 7.2)(Carbon)	-	1000	-
Table-1,(Clauses 5.1 and 7.2)(Sulphor)	-	1000	-
Table-1,(Clauses 5.1 and 7.2)(Phosphorous)	-	1000	-
Table-1,(Clauses 5.1 and 7.2)(Manganese)	-	1000	-
Table-1,(Clauses 5.1 and 7.2)(Silicon)	-	1000	-
Table-1,(Clauses 5.1 and 7.2)(Nitrogen)	-	2000	-
Table-1,(Clauses 5.1 and 7.2)(Aluminium)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(S+P)	-	500	-

24 Oct, 2028

-
-

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

ALL GRADES ALL SIZES ALL DESIGNATION

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1500	-
6.1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1500	-
6.1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1500	-
4(Freedom from defects)	-	500	-
7.1(Hardenability)	-	2000	-
7.2(Grain Size)	-	1000	-
7.3(Macro examination)	-	1500	-
7.4(Decarburisation)	-	1500	-
7.5(Hardness)	-	500	-
7.6.2(ii)Ultimate Tensile Strength, Mpa)	-	1500	THIS TEST INCLUDES TS, YS, %ELONGATION & %RA
9(Rolling Tolerances)	-	500	-

24 Oct, 2028

-
-

IS 5489 (1975)

Specification for carburizing steels for use in bearing industry (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1,4.1.1 & 4.2 Table 1(Carbon- Relevant parts of IS 228 )	-	1000	-
4.1,4.1.1 & 4.2 Table 1(Manganese- Relevant parts of IS 228 )	-	1000	-
4.1,4.1.1 & 4.2 Table 1(Silicon- Relevant parts of IS 228 )	-	1000	-
4.1,4.1.1 & 4.2 Table 1(Sulphur- Relevant parts of IS 228 )	-	1000	-
4.1,4.1.1 & 4.2 Table 1(Phosphorous- Relevant parts of IS 228 )	-	1000	-
4.1,4.1.1 & 4.2 Table 1(Nickel- Relevant parts of IS 228 )	-	1500	-
4.1,4.1.1 & 4.2 Table 1(Chromium- Relevant parts of IS 228 )	-	1500	-
4.1,4.1.1 & 4.2 Table 1(Molybdenum- Relevant parts of IS 228 )	-	1500	-
4.1.1(Copper- Relevant parts of IS 228 )	-	1500	-
4.1.1(Vanadium- Relevant parts of IS 228 )	-	1500	-
6( MICROSTRUCTURE)	-	1500	-
7( HARDNESS)	-	500	-
8(. INCLUSION CONTENT IS : 4163-1967*)	-	1500	-
9(Surface Defect)	-	500	-
10( GRAIN SIZEIS : 2853-1964)	-	1000	-
11.3(i) Tolerance on Length -IS : 3739-1972)	-	500	-
11.4(ii)Tolerance on Straightness)	-	500	-
12( SIZE AND WEIGHT OF WIRE AND WIRE ROD)	-	500	-

24 Oct, 2028

-
-

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sulphur-Relevant Parts of IS 228)	-	1000	-
4.1(Phosphorous-Relevant Parts of IS 228)	-	1000	-
4.1(Nitrogen-Relevant Parts of IS 228)	-	2000	-
6(DIMENSIONS)	-	500	-
7(SIZES OF SHEETS ‘OR ROLLS)	-	500	-
8(MASS)	-	500	-
9.2(Tolerance on Size of Mesh)	-	500	-
9.3(Tolerance on Size of Sheet)	-	500	-
9.4(Tolerance on Mass of Fabric)	-	500	-
10(MECHANICAL PROPERTIES)	-	500	-
11.2(Tensile Test)	-	1500	-
11.3(Reverse Bend Test)	-	500	-

24 Oct, 2028

-
-

IS 9516 (1980)

Specification for heat resisting steels

ALL GRADES ALL SIZES ALL DESIGNATION

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS AND TOLERANCE)	-	500	-
6, Table 2(iv) Hardness, HBW)	-	500	-
6, Table 2(ii)Ultimate Tensile Strength, Mpa)	-	1500	THIS TEST INCLUDES TS, YS, %ELONG & %RA
4(FREEDOM FROM DEFECTS)	-	500	-
5.1,5.2,5.3 Table 4(Carbon-Relevant parts of IS 228)	-	1000	-
5.1,5.2,5.3 Table 4(Silicon-Relevant parts of IS 228)	-	1000	-
5.1,5.2,5.3 Table 4(Manganese-Relevant parts of IS 228)	-	1000	-
5.1,5.2,5.3 Table 4(Nickel-Relevant parts of IS 228)	-	1500	-
5.1,5.2,5.3 Table 4(Chromium-Relevant parts of IS 228)	-	1500	-
5.1,5.2,5.3 Table 4(Nitrogen-Relevant parts of IS 228)	-	2000	-
5.1,5.2,5.3 Table 4(Sulphur-Relevant parts of IS 228)	-	1000	-
5.1,5.2,5.3 Table 4(Phosphorous-Relevant parts of IS 228)	-	1000	-
5.3(Molybdenum-Relevant parts of IS 228)	-	1500	-
5.3(Copper-Relevant parts of IS 228)	-	1500	-
5.3(Vanadium-Relevant parts of IS 228)	-	1500	-

24 Oct, 2028

-
-

IS 5651 (1987)

Specification for steels for pneumatic tools (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Carbon-IS 228 or any other established instrumental /Chemical method)	-	1000	-
7(Hardness )	-	500	-
8(Macro-Structure -)	-	1500	-
9(Surface decarburization,IS : 6396-1983 )	-	1500	-
10(Micro-Structure)	-	1500	-
11(Grain Size IS : 2853-l 864 )	-	1000	-
13(Dimensional Tolerances)	-	500	-
13.2..1(Straightness IS : 3739:1987 )	-	500	-
5.1 Table 1(Silicon-IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1 Table 1(Manganese-IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1 Table 1(Sulphur-IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1 Table 1(Chromium-IS 228 or any other established instrumental /Chemical method)	-	1500	-
5.1 Table 1(Phosphorous-IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1 Table 1(Vanadium-IS 228 or any other established instrumental /Chemical method)	-	1500	-
5.1 Table 1(Tungsten-IS 228 or any other established instrumental /Chemical method)	-	1500	-
5.1.3 (Nickel-IS 228 or any other established instrumental /Chemical method)	-	1500	-
5.1.3 (Copper-IS 228 or any other established instrumental /Chemical method)	-	1500	-
5.1.3 (Tin-IS 228 or any other established instrumental /Chemical method)	-	1500	-
5.1.3 (Molybdenum-IS 228 or any other established instrumental /Chemical method)	-	1500	-

24 Oct, 2028

-
-

IS 14491 (1997)

Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11( DIMENSIONS AND DIMENSIONAL TOLERANCES )	-	5000	-
10(FREEDOM FROM DEFECTS)	-	500	-
8.4, Table 3(Bend)	-	500	-
8.2(Tensile Test-1608:Part 1)	-	1500	-
7.1 & 7.2(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
7.1 & 7.2(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
7.1 & 7.2(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
7.1 & 7.2(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
7.1 & 7.2(Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-

24 Oct, 2028

-
-

IS 9962 (1981)

Specification for steel wire for needles

ALL GRADES ALL SIZES ALL DESIGNATION

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1(Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
5.1(Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
6(Nominal size of wire-IS 9962)	-	500	-
7.1(Tensile Test - IS 1608(Pt -1))	-	1500	-
7.3(Decarburisation-IS 9962)	-	1500	-
9(Freedom from defects-IS 9962)	-	500	-
8(Finish - IS 9962)	-	500	-

24 Oct, 2028

-
-

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11,12(Dimensions & Tolerance)	-	500	-
9(Freedom from defects , IS 8952)	-	500	-
10 ,a)(Macro examination - IS 11371)	-	1500	-
10 ,c)(Inclusion content - IS 4163)	-	1500	-
10 ,b)(Sulphur Print Test- IS 12037)	-	2000	-
4,7.1 Table 1(Carbon- IS 228 or any other established instrumental /Chemical method)	-	1000	-
4,7.1 Table 1(Manganese- IS 228 or any other established instrumental /Chemical method)	-	1000	-
4,7.1 Table 1(Sulphur- IS 228 or any other established instrumental /Chemical method)	-	1000	-
4,7.1 Table 1(Phosphorous- IS 228 or any other established instrumental /Chemical method)	-	1000	-
4,7.1 Table 1(Silicon- IS 228 or any other established instrumental /Chemical method)	-	1000	-
4,7.1 Table 1(Aluminium- IS 228 or any other established instrumental /Chemical method)	-	1500	-
4,7.1 Table 1(V- IS 228 or any other established instrumental /Chemical method)	-	1500	-
4,7.1 Table 1(Ti- IS 228 or any other established instrumental /Chemical method)	-	1500	-

24 Oct, 2028

-
-

IS 8052 (2006)

Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Freedom from defects , IS 8052)	-	500	-
10,11(Dimensions & Tolerances)	-	500	-
6.1 Table 1(Carbon- IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1 Table 1(Silicon- IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1 Table 1(Manganese- IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1 Table 1(Sulphur- IS 228 or any other established instrumental /Chemical method)	-	1000	-
6.1 Table 1(Phosphorous- IS 228 or any other established instrumental /Chemical method)	-	1000	-

24 Oct, 2028

-
-

IS 6967 (1973)

Specification for steels for electrically welded round link chains

ALL GRADES ALL SIZE ALL DESIGNATION

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 2(Carbon- IS 228)	-	1000	-
5.1 Table 2(Manganese- IS 228)	-	1000	-
5.1 Table 2(Nickel- IS 228)	-	1500	-
5.1 Table 2(Chromium- IS 228)	-	1500	-
5.1 Table 2(Molybdenum- IS 228)	-	1500	-
5.1 Table 2(Sulphur- IS 228)	-	1000	-
5.1 Table 2(Phosphorous- IS 228)	-	1000	-
5.1 Table 2(Silicon- IS 228)	-	1000	-
4( FREEDOM FROM DEFECTS)	-	500	-
7( HARDNESS)	-	500	-
8, Table 3(Tensile Test-1608:Part 1)	-	1500	-
10(GRAIN SIZE)	-	1000	-
9(HARDENABILITY)	-	2000	-

24 Oct, 2028

-
-

IS 6902 (1973)

Specification for steel wire for spokes

ALL GRADES ALL SIZE ALL DESIGNATION

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1(Carbon- IS 228)	-	1000	-
Cl. 4.1(Manganese- IS 228.)	-	1000	-
Cl. 4.1(Sulphur- IS 228.)	-	1000	-
Cl. 4.1(Phosphorus- IS 228.)	-	1000	-
5.1( Tensile strength )	-	1500	-
6.0( Bend Test )	-	500	-
8.0(Wire diameter & Tolerances)	-	500	-

24 Oct, 2028

-
-

IS 4398 (1994)

Carbon - Chromium steel for the manufacture of balls, rollers and bearing races - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14( Dimensional tolerances)	-	500	-
Cl. 5.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
7( Microstructure)	-	1500	-
8( Hardness-IS 1500: Pt 1)	-	500	-
9(Inclusion content)	-	1500	-
10.1( Decarburization & surface)	-	1500	-
12( Macro etch test)	-	1500	-
11( Fracture test)	-	1500	-
Cl. 5.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1 & Table 1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1 & Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1 & Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-

24 Oct, 2028

-
-

IS 4397 (1999)

Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defects )	-	500	-
8( Bend Test )	-	500	-
9(Hardness-IS 1500: Pt 1)	-	500	-
10(CUPPING TEST)	-	1000	-
11(MICRO-EXAMINATION)	-	1500	-
14.1, Table 3, Table 4(Thickness)	-	500	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-

24 Oct, 2028

-
-

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
7.1(Tensile Test - IS 1608(Pt -1))	-	1500	-
5(Sizes and Tolerances - IS 4224)	-	500	-
Cl. 3.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-

24 Oct, 2028

-
-

IS 3195 (1992)

Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3, 6.1, 6.2 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
7(Hardness)	-	500	-
8(Decarburisation)	-	1500	-
9(Inclusion rating)	-	1500	-
10(Freedom from defects)	-	500	-
11( DIMENSIONS AND TOLERANCES)	-	500	-

24 Oct, 2028

-
-

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Carbon- Relevant parts of IS 228.)	-	1000	-
Cl. 5.1(Manganese- Relevant parts of IS 228.)	-	1000	-
Cl. 5.1(Sulphur- Relevant parts of IS 228.)	-	1000	-
Cl. 5.1(Phosphorus- Relevant parts of IS 228.)	-	1000	-
7(Sizes and tolernces)	-	500	-
8(FREEDOM FROM DEFECTS)	-	500	-

24 Oct, 2028

-
-

IS 2507 (1975)

Specification for cold - rolled steel strips for springs (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(FREEDOM FROM DEFECTS)	-	500	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Carbon- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Silicon- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Manganese- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Sulphur- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Phosphorus- Appropriate parts of IS 228.)	-	1000	-
10(Physical properties(optional))	-	1500	-

24 Oct, 2028

-
-

IS 7494 (1981)

Specification for steel for valves for internal combustion engines (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, 6.2, 6.3, & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
5(Freedom from defects)	-	500	-
9.1, Table 5(Tensile Test-1608:Part 1)	-	1500	-
12(Dimensions and Tolerances, mm)	-	1000	-
10(Inclusion rating)	-	1500	-
Cl. 6.1, 6.2, 6.3, & Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-

24 Oct, 2028

-
-

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8(Freedom from defects)	-	500	-
6.1, Table 3 (Impact Test)	-	1000	-
7(Workmanship & Finish)	-	500	-
6.1, Table 3 (Tensile Test-1608:Part 1)	-	1500	-
6.1, Table 3 (Yield Strength, Mpa)	-	1500	-
6.1, Table 3 (Elongation, %)	-	1500	-
6.1, Table 3 (Reduction in area, Percent)	-	1500	-

24 Oct, 2028

-
-

IS 9550 (2001)

Bright steel bars - Specification (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Decarburisation)	-	1500	-
8.1 and 8.2(Dimensions and Tolerances, mm)	-	500	-
7(Mechancial Properties)	-	500	-
8.2.3(Straightness Tolerances)	-	500	-
Cl.6(Parameter as per requiremnt of purchaser.)	-	5000	-

24 Oct, 2028

-
-

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
10.2(Tensile Test-1608:Part 1)	-	1500	-
12 and 13(Dimensions and Tolerances)	-	500	-
11(Impact Test-1757)	-	1000	-

24 Oct, 2028

-
-

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions and Tolerances)	-	500	-
6(Freedom from defects)	-	500	-
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	2000	-

24 Oct, 2028

-
-

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard)	-	1000	-
Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard)	-	1000	-
5.2(Tensile Test-1608:Part 1)	-	1500	-
5.3(Bend Test-1599)	-	500	-
7.1(Freedom from defects)	-	500	-
8.2(Width)	-	500	-
8.2(Thickness)	-	500	-
9.1(Finishing & Packing)	-	500	-

24 Oct, 2028

-
-

IS 1110 (1990)

Ferrosilicon - Specification (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1500	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1500	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1500	-

24 Oct, 2028

-
-

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	1000	-
Cl. 5.1 Table 1(Silicon)	-	1000	-
Cl. 5.1 Table 1(Manganese)	-	1000	-
Cl. 5.1 Table 1(Phosphorous)	-	1000	-
Cl. 5.1 Table 1(Sulphur)	-	1000	-
Cl. 8.1(Tensile Strength)	-	1500	-

24 Oct, 2028

-
-

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Surface Finish)	-	500	-
8.5(Erichsen Cupping Test)	-	500	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-

24 Oct, 2028

-
-

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	1500	-
11(Surface finish)	-	500	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-

24 Oct, 2028

-
-

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1500	-
Cl 10(Length, Width & Thickness)	-	500	-
6.0(CARBON)	-	1000	-
6.0(SULPHUR)	-	1000	-
6.0(PHOSPHORUS)	-	1000	-
6.0(MANGANESE)	-	1000	-
6.0(SILICON)	-	1000	-
6.0(ALUMINIUM)	-	1500	-

24 Oct, 2028

-
-

IS 15103 (2002)

Fire resistant steel - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Tensile Test)	-	1500	-
Cl 11(Bend Test)	-	500	-
Cl 12(Impact Test)	-	1000	-
Cl 13(Freedom from Defects)	-	500	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, C)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Si)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mn)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, P)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, S)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Cr)	-	1500	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mo)	-	1500	-

24 Oct, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 info@nisst.org

Scope List