BIS - LIMS (Laboratory Information Management System)

Institute for Auto Parts and Hand Tools Technology

A-9, Phase-V, Focal Point, Ludhiana, Ludhiana, Ludhiana, Punjab, 141010

8427262400 iatldh@iapht.org

Scope List

Reset

47 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

Grade / Type / Size / Designation etc.

6780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(DIMENSIONS)	-	1200	-
Cl 4(MATERIAL)	-	4580	-
Cl 7(0)	-	1000	Finish
Clause 4.2(Carbon Content)	-	0	-
Clause 4.2(Silicon)	-	0	-
Clause 4.2(Manganese)	-	0	-
Clause 4.2(nickel)	-	0	-
Clause 4.2(Chromium)	-	0	-
Clause 4.2(Sulphur)	-	0	-
Clause 4.2(Phosphorus)	-	0	-
Clause 4.2(Carbon Content)	-	0	-
Clause 4.2(Silicon)	-	0	-
Clause 4.2(Manganese)	-	0	-
Clause 4.2(nickel)	-	0	-
Clause 4.2(Chromium)	-	0	-
Clause 4.2(Sulphur)	-	0	-
Clause 4.2(Phosphorus)	-	0	-
Clause 4.2(Mech)(Phosphorus)	-	0	-
Clause 4.2(Mech)(Sulphur)	-	0	-
Clause 4.2(Mech)(Chromium)	-	0	-
Clause 4.2(Mech)(nickel)	-	0	-
Clause 4.2(Mech)(Manganese)	-	0	-
Clause 4.2(Mech)(Silicon)	-	0	-
Clause 4.2(Mech)(Carbon Content)	-	0	-
Cl 7(0)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 5(MANUFACTURE)	-	0	-
Cl 4(MATERIAL)	-	0	-
Cl 3(NOMINAL SIZES)	-	0	-
Cl 3(NOMINAL SIZES)	-	0	-
8(Marking)	-	0	-
Clause 4.2(Mech)(Phosphorus)	-	0	-
Clause 4.2(Mech)(Sulphur)	-	0	-
Clause 4.2(Mech)(Chromium)	-	0	-
Clause 4.2(Mech)(nickel)	-	0	-
Clause 4.2(Mech)(Manganese)	-	0	-
Clause 4.2(Mech)(Silicon)	-	0	-
Clause 4.2(Mech)(Carbon Content)	-	0	-
Cl 7(0)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 6(DIMENSIONS)	-	0	-
Cl 5(MANUFACTURE)	-	0	-
Cl 4(MATERIAL)	-	0	-
Cl 3(NOMINAL SIZES)	-	0	-
Cl 3(NOMINAL SIZES)	-	0	-
8(Marking)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 22.02.2024

IS 1284 (1975)

Specification for wrought aluminium alloy bolt and screw stock (for general engineering purposes) (Second Revision)

All Grade / Type / Size / Designation etc.as per std.

7340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defects)	-	500	-
6(Dimensions and tolerances)	-	1200	-
8.1(Tensile test)	-	3600	-
8.2(Head-Forming test)	-	1000	-
4(Freedom from defects)	-	0	-
5.1 Table 1(Copper)	-	0	-
5.1 Table 1(Magnesium)	-	0	-
5.1 Table 1(Silicon)	-	0	-
5.1 Table 1(Iron)	-	0	-
5.1 Table 1(Manganese)	-	0	-
5.1 Table 1(Zinc)	-	0	-
5.1 Table 1(Titanium and/or other grain refining elements)	-	0	-
5.1 Table 1(Chromium)	-	0	-
5.1 Table 2(Diameter)	-	0	-
5.1 Table 2(0.2 percent proof stress)	-	0	-
5.1 Table 2(Tensile strength)	-	0	-
6(Dimensions and tolerances)	-	0	-
8.1(Tensile test)	-	0	-
8.2(Head-Forming test)	-	0	-
10(Marking)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 22.02.2024

IS 281 (2009)

Mild steel sliding door bolts for use with padlocks - Specification (Fourth Revision)

All Grade / Type / Size / Designation etc.as per Std.

3540 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	1200	-
8.1(FINISH-Sliding Bolts, Plate Type)	-	1000	-
Cl. 8.1 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	0	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	0	-
3(TYPES)	-	0	-
4(SIZES)	-	0	-
6(DIMENSIONS AND TOLERANCES-A)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-B)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-C)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-D)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-E)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-F)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-G)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-H)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-J)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-T)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 (IS 451))	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on bolts plates)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on Socket)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on bolt)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Socket)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Staple)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for plate and sockets)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for Staple)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
8.1(FINISH-Sliding Bolts, Plate Type)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 22.02.2024

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

All Grade/Type/Size/Designation etc. as per standard.

6780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(DIMENSIONS AND TOLERANCES)	-	1200	-
Cl 7(FINISH)	-	1000	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 7(FINISH)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	0	-
Cl 6(MANUFACTURE)	-	0	-
Cl 7(FINISH)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
5(DIMENSIONS AND TOLERANCES)	-	0	-
6(MANUFACTURE)	-	0	-
7(FINISH)	-	0	-
8(Marking)	-	0	-
8(Marking)	-	0	-
Cl.4(Carbon)	-	4580	Chemical Composition as per Clause No.4
Cl.4(Sulphur)	-	0	-
Cl.4(Phosphorus)	-	0	-
Cl.4(Manganese)	-	0	-
Cl.4(Silicon)	-	0	-
Cl.4(Nickel)	-	0	-
Cl.4(Chromium)	-	0	-
Cl.4(Copper)	-	0	-
Cl.4(Molybdenum)	-	0	-
Cl.4(Nitrogen)	-	0	-
Cl.4(Titanium)	-	0	-
Cl.4(Niobium)	-	0	-

Complete

17 Feb, 2025

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

All Grade/Type/Size/Designation etc. standard

13300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MECHANICAL PROPERTIES)	-	10600	Charges for all tests as per IS 1367-3 for Property class-4.6.
8.1(FINISH)	-	500	-
10.1.1(TESTS)	-	1000	Cantilever Test
5(MECHANICAL PROPERTIES)	-	0	-
8.1(FINISH)	-	0	-
10.1.1(TESTS)	-	0	-
4(GRADES)	-	0	-
6-6.1(Nuts)	-	0	-
6-6.2.1(Washers)	-	0	-
6-.6.2.2(Washers)	-	0	-
7(GENERAL REQUIREMENTS)	-	1200	Dimension
8.2()	-	0	-
8.3()	-	0	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	0	-
12(MARKING)	-	0	-
13(PACKAGING)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 22.02.2024

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

All Grade / Type / Size / Designation as per IS 5872

5480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(UTM)	-	900	Rs 900/ sample for Mechanical testing Note : sample preparation charges extra.
Cl 7(Bending To Both Side At 90°, Then Straight)	-	1000	Rs. 1000/ sample for Bend and re- bend test Note : sample preparation charges extra.
Cl 9(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 10(Width & Thickness)	-	1200	Rs 1200/ sample for dimensional tolerances.
5(Chemical Composition)	-	880	C, Mn, P, S = Rs 100/Element = Rs 400 Nb, V, Ti, B = Rs120/Element. = Rs 480
Cl 11(Workmanship)	-	500	-
Cl 12(Coating)	-	500	-

Complete

17 Feb, 2025

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grade / Type / Size / Designation as per IS 2062

16980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.3(UTM)	-	900	Rs 900/ sample for Mechanical Testing Sample Preparation charges extra. -
Cl 11.3(Press)	-	500	Rs 500/ sample for Bend Test. Sample Preparation charges extra.
Cl 12(Sudden Load Applied)	-	4000	RS 1000 / set for impact test at ambient temp. Rs 3000/ set for Impact test at Sub Zero temp. (-20 degree C)
Cl 15(Length, Width & Thickness)	-	1700	Rs 1200 / sample for Dimensions. Rs 500/- for calculation of mass.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Nb, Ti, B, Cr, Mo, V, Ni, Cu, Al, = Rs 120/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	580	Nb, Ti, B, Al = 120/ element= 480/- Carbon= 100/- Total= 480+100= 580/-
14.1(Soundness test)	-	1000	-
14.2(Grain Size)	-	400	-
14.2(Inclusion)	-	400	-
Cl 13(Y Groove Cracking Test)	-	2000	-
Cl 7(Workmanship)	-	500	-
Cl 18(Weight)	-	500	-
16(Tolerance)	-	500	-

Complete

17 Feb, 2025

IS 6118 (2017)

Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (Second Revision)

All Grade / Type / Size / Designation etc

3360 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(l)	-	2660	Rs 1200 for dim.= 1200/ - C, Si, Mn, P, S = Rs 100/Element. = Rs 500 - Cr, Cu, V, Mo, Ni, W, Sn, Co = Rs 120/Element. = Rs 960
Table 1(t1, max)	-	700	Hardness Test (HV or HRc) = 400/- Handle load Test = 300/-
Table 1(g, min)	-	0	0
Table 1(l3.min)	-	0	-
Table 1(l1)	-	0	-
Table 1(Fa)	-	0	-
Table 1(Sb)	-	0	-

Complete

17 Feb, 2025

Revised version of IS 6118:2017 included.

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

All Grade / Type / Size / Designation as per IS 7283

9240 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	500	-
Cl 7(Diameter & Out Of Round)	-	1200	-
Cl 8(Decarburization)	-	400	-
Cl 9(Inclusion)	-	400	-
Cl 10(Hardenability)	-	5000	Note: Sample Preparation charges extra.
Cl 11(Size)	-	400	---
Cl 5(Material Test)	-	1340	-

Complete

17 Feb, 2025

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All Grade / Type / Size / Designation

3720 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1300	Rs 1300/ sample for mechanical Test - C, Si, Mn, P, S = Rs 90/Element - Al = Rs 110/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12(Length, Width & Thickness)	-	1200	-
Cl 8(UTM)	-	1300	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12(Length, Width & Thickness)	-	1200	-

Complete

17 Feb, 2025

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

All Grade / Type / Size / Designation as per 11513

4420 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	90	- C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Manganese %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Phosphorus %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Sulphur %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(Silicon %)	-	90	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Aluminium %)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Copper %)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Nb)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1(V)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
6.1( Ti)	-	110	C, Si, Mn, P, S = Rs 90/Element Cr, Mo, V, Ni, Cu, Al = Rs 110/Element. - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl 8(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	3000	Rs 3000/ sample for Dimensions & tolerance
6.1(Carbon %)	-	90	-
6.1(Manganese %)	-	90	-
6.1(Phosphorus %)	-	90	-
6.1(Sulphur %)	-	90	-
6.1(Silicon %)	-	110	-
6.1( Aluminium %)	-	110	-
6.1( Copper %)	-	110	-
6.1( Nb)	-	110	-
6.1(V)	-	110	-
6.1( Ti)	-	110	--
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	3000	-

Complete

17 Feb, 2025

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

All Grade / Type / Size / Designation as per IS 10748

7560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	100	- C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al = Rs 120/Element
7.1(Manganese %)	-	100	-
7.1(Phosphorus %)	-	100	-
7.1(Sulphur %)	-	100	-
7.1(Silicon %)	-	100	-
7.1( Copper %)	-	120	-
7.1(Ni)	-	120	-
7.1(V)	-	120	-
7.1( Nb)	-	120	-
7.1(Mo)	-	120	-
7.1(Cr)	-	120	-
Cl 8 & Table 3(UTM)	-	900	Rs 900/ sample for mechanical test. Note : sample preparation charges extra.
Cl 9(Press)	-	500	Rs 500/ sample for Bend test. Note : sample preparation charges extra.
Cl 11(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 12 & 13(Length, Width & Thickness)	-	1200	Rs 1200/ sample for dimension and tolerances
7.1( Aluminium %)	-	120	-
7.1( Ti)	-	120	-
7.1(CE)	-	500	-
7.1( Nitrogen%)	-	2500	-

Complete

17 Feb, 2025

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

All Grade / Type / Size / Designation as per IS 7887

2320 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	100	- C, Si, Mn, P, S = Rs 100/Element - Al = Rs 120/Element.
6.1(Silicon %)	-	100	-
6.1(Manganese %)	-	100	-
6.1(Phosphorus %)	-	100	-
6.1(Sulphur %)	-	100	-
6.1( Aluminium %)	-	120	-
Cl 8(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 9(Nominal Diameter & Out Of Shape)	-	1200	Rs 1200/ sample for dimensions.

Complete

17 Feb, 2025

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

All Grade / Type / Size / Designation

10180 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	100	- C, Si, Mn, P, S, = Rs 100/Element - Nb, Ti, B, Ni, Cr, Cu, V, Mo, Al, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element
7.1(Silicon %)	-	100	-
7.1(Manganese %)	-	100	-
7.1(Phosphorus %)	-	100	-
7.1(Sulphur %)	-	100	-
7.1(Ni)	-	120	-
7.1(Cr)	-	120	-
7.1(Mo)	-	120	-
7.1(V)	-	120	-
7.1( Aluminium %)	-	120	-
7.1( Copper %)	-	120	-
Cl 13(Workmanship)	-	500	Rs 500/ sample for Freedom from defects
Cl 8(UTM)	-	900	Rs 900/ sample for mechanical testing. Note: Sample preparation charges extra.
Cl 9(Press)	-	500	Rs 500/ sample for bend test. Note: Sample preparation charges extra.
Cl 10(Sudden Load Applied)	-	4000	Rs 1000/ set for Impact Test at ambient temp. Rs 3000/ set for impact test at Sub zero Temp.
Cl 15(Length, Width & Thickness)	-	1700	Rs 1200/ sample for Dimensions. Rs 500/- for calculation of mass
Cl 11(Expansion Test)	-	500	-
7.1( Nb)	-	120	-
7.1( Ti)	-	120	-
7.1(CE)	-	620	CE + B= 500+120=620/-
Cl 14(Weldability)	-	500	-
Clause 16(IS 5986)	-	500	-

Complete

17 Feb, 2025

IS 3502 (2009)

Steel chequered plates (Third Revision)

All Grade / Type / Size / Designation as per IS 3502

8680 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	500	-
Cl 8(UTM)	-	900	Rs 900/ sample for mechanical test. Note:Sample preparation charges extra
Cl 9(Press)	-	500	Rs 500/ sample for Bend test. Note:Sample preparation charges extra
Cl 10(Length, Width, Thickness & Chequered Height)	-	1700	Rs 1200/ sample for Dimensions. Rs 500/ for calculation of mass.
Cl.4.1 (IS-2062, E250A)(CARBON)	-	1180	C = Rs 100 Nb, Ti, B, Ni, Cr, Cu, V, Mo, Al = Rs 120/Element =1080/-
Cl.4.1 (IS-2062, E250A)(SILICON)	-	100	-
Cl.4.1 (IS-2062, E250A)(MANGANESE)	-	100	-
Cl.4.1 (IS-2062, E250A)(PHOSPHURS)	-	100	-
Cl.4.1 (IS-2062, E250A)(SULPHUR)	-	100	-
Cl.4.1 (IS-2062, E250A)(NITROGEN)	-	2500	-
Cl.4.1 (IS-2062, E250A)(CARBON EQUIVALENT)	-	500	-
Cl. 11(Weight)	-	500	-

Complete

17 Feb, 2025

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

All Grade / Type / Size / Designation as per IS 6240

11580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	100	C, Si, Mn, P, S = Rs 100/ Element Ti, Nb V, Al, = Rs 120/Element.
6.1(Silicon %)	-	100	-
6.1(Manganese %)	-	100	-
6.1(Phosphorus %)	-	100	-
6.1(Sulphur %)	-	100	-
6.1( Aluminium %)	-	480	Nb,Ti,V, Al=480/-
6.1(Nitrogen%)	-	2500	-
Cl 7(UTM)	-	900	Rs 900/sample for Mechanical test. Sample preparation charges extra.
Cl 8(Press)	-	500	Rs 500/ sample for bend test
Cl 9(Strainage Embrittlement)	-	4500	Rs 4500/ sample for strainage embrittlement
Cl 10(Erichsen Cupping)	-	500	Rs 500/ sample for Erichsen Cupping
Cl 13(Length, Width & Thickness)	-	1200	Rs 1200 Dimensions & Tolerance.
Cl. 12(Freedom from defects)	-	500	-

Complete

17 Feb, 2025

IS 5517 (1993)

Steels for hardening and tempering - Speicification (Second Revision)

All grade, Type, size and designation as per IS 5517

32260 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	- C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	- C, Si, Mn, P, S = Rs 100/Element - Ni, Cr, Cu, V, Mo, Al, B, = Rs 120/Element - If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
8,Table 6(Hardness Test - IS 1500(Pt -1))	-	400	Rs 400/ sample for hardness testing.
9, Table 5(Mechanical ptoperties - IS 1608(Pt -1),IS 1598)	-	1900	Rs 900 for mechanical testing, Rs 1000 for Izod Impact testing . Note : Sample preparation charges extra.
10(Grain Size - IS 4748)	-	400	Rs 400/ sample for Grain size.
11.1(Inclusion Rating- IS 4163)	-	400	Rs 400/ sample for inclusion rating.
12;Table 7(Hardenability Test-IS 3848)	-	5000	Rs 5000/ sample for harden ability test.
13.1&13.2&13.3(Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-	1200	Rs 1200/ sample for dimensional tolerances.
11.2(Blue Fracture Test - IS 10138 (Pt1))	-	4500	-
16.1 d);Table 5(Additional Test;Blank Hardening Test)	-	6000	-
16.1 g)(Hot up set for forgability)	-	6000	-
16.1 b)(Additional Test; Ultrasonic Test -IS 3664)	-	1000	-
11.2(Magnetic Particle Test -- IS 10138(Pt3))	-	1000	-
11.2(Step Down Test- IS 10138(Pt2))	-	1000	-
5(Freedom from defects , IS 5517)	-	500	-
16.1 f)(Microstructure for machinability,including banding)	-	500	-
16.1 a)(Additional Test; Macro etch Test)	-	1000	-

Complete

17 Feb, 2025

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All Grade, Type, Size and Designation as per IS 1079

5320 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	100	Note: - C, Si, Mn, P, S = Rs 100/Element Cr, Mo, V,Ni, Cu, Al =120/Element If "N” is required, then testing charges will be extra @ 1000/- per Sample for this element.
6.1(Manganese %)	-	100	-
6.1(Phosphorus %)	-	100	-
6.1(Sulphur %)	-	100	-
Cl 8(UTM)	-	900	Rs 900 for Mechanical test (For YS, TS, Elongation) Note: Sample Preparation Charges Extra.
Cl 9(Press)	-	0	RS 500/ sample for bend test Note: Sample Preparation Charges Extra.
Cl 10(Die Press)	-	500	Rs 500/ sample for cupping test Note: Sample Preparation Charges Extra.
Cl 12(Workmanship)	-	500	Rs 500/ sample
Cl 13(Length, Width & Thickness)	-	1200	Rs 1200 for dimensional tolerances.
6.1(Silicon %)	-	100	-
6.1( Nb)	-	120	-
6.1( Ti)	-	120	-
6.1(V)	-	120	-
6.1(Microalloying)	-	120	Boron as micro alloying Element
6.1( Copper %)	-	120	-
6.1( Aluminium %)	-	120	-
9(Bend test)	-	500	-
14(Calculation of weight)	-	500	-

Complete

17 Feb, 2025

IS 6149 (1984)

Specification for single - Ended open - Jaw adjustable wrenches (First Revision)

All Grade, Type, Size and Designation

5060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table-1(Dimensions- Nominal Size)	-	600	Rs 600/- for complete inspection. - C, Si, Mn, P, S = Rs 90/Element. - Cr, Cu, V, Mo, Al, Ni = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
4 Table-1(Dimensions- a)	-	0	--
4 Table-1(Dimensions- b)	-	0	--
4 Table-1(Dimensions- t)	-	0	--
4 Table-1(Dimensions- d)	-	0	--
4 Table-1(Dimensions- Opening of adjustable jaws)	-	0	--
6(Hardness- Frame, handle and Jaw)	-	300	Rs 300/sample for Hardness testing -
8(Longitudinal Play of Adjustable Jaw)	-	200	---
8(Transverse Play of Adjustable Jaw)	-	200	---
8(Torque)	-	300	---
4 Table-1(Dimensions- Nominal Size)	-	600	Rs 600/- for complete inspection. -
3(Grades)	-	1110	C, Si, Mn, P, S = Rs 90/Element. - Cr, Cu, V, Mo, Al, Ni = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.

Complete

17 Feb, 2025

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

All Grade, Type, Size and Designation as per IS 3650

5560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- L)	-	1200	Rs. 1200/- dimensional inspection charges
3 Table 1(Dimensions- a)	-	0	---
3 Table 1(Dimensions- b)	-	0	--
3 Table 1(Dimensions- c1)	-	0	--
3 Table 1(Dimensions- e)	-	0	---
3 Table 1(Dimensions- h)	-	0	--
3 Table 1(Dimensions- h1)	-	0	--
3 Table 1(Dimensions- t)	-	0	-
4(Hardness- Near cutting edges)	-	400	-
4(Hardness- Body gripping surfce)	-	0	---
8.2(Tube Gripping Test)	-	200	--
8.3(Shock Test)	-	200	--
8.4(Torsion Test)	-	300	---
8.5(Handle Load Test)	-	300	--
8.6(Bend Test)	-	200	--
8.7(Insulation Test)	-	400	--
8.1(Cutting Test)	-	200	--
5(Material testing (Chemical composition))	-	1960	- C, Si, Mn, P, S = Rs 100/Element. = Rs 500 (for jaws) - C, Si, Mn, P, S = Rs 100/Element. = Rs 500 (for Rivet) - Cr, Cu, V, Mo, Ni, W, Sn, Co = Rs 120/Element. = Rs 960

Complete

17 Feb, 2025

IS 2029 (1998)

Ring wrenches (Spanners) - Specification (Fourth Revision)

All grade,Type, Size and Designation as per IS 2029

4190 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table-1(Dimensions- s1)	-	1200	Complete Inspection charges Rs 1200/-. C, Si, Mn, P, S = Rs 90/Element Cr, Mo V, Ni, Cu, Al, = Rs 110/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element.
3, Table-1(Dimensions- s2)	-	0	-
3, Table-1(Dimensions- a)	-	0	-
3, Table-1(Dimensions- b1)	-	0	-
3, Table-1(Dimensions- b2)	-	0	-
3, Table-1(Dimensions- L)	-	0	-
5(Hardness)	-	300	Rs 300/ sample for Hardness Testing.
6(Workmanship and Finish)	-	500	Rs 500/ sample for freedom from defects
6(Torque Testing)	-	300	Rs 300/ sample for Torque Testing.
3, Table-1(Dimensions- s1)	-	-	-
3, Table-1(Dimensions- s2)	-	-	-
3, Table-1(Dimensions- a)	-	-	-
3, Table-1(Dimensions- b1)	-	-	-
3, Table-1(Dimensions- b2)	-	-	-
3, Table-1(Dimensions- L)	-	-	-
5(Hardness)	-	-	-
6(Workmanship and Finish)	-	-	-
6(Torque Testing)	-	-	-

Complete

17 Feb, 2025

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

All Grade, Type, Size and designation as per IS 2028

4060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions- a)	-	1200	Rs 1200/ sample for complete dimensional inspection.
3.2, 3.3, 3.4(Dimensions- a)	-	0	-
3.2, 3.3, 3.4(Dimensions- l)	-	0	-
5(Hardness- upto 32 mm)	-	400	Rs 400/ sample for Hardness test
6(Workmanship And Finish)	-	500	Rs 500/ sample for freedom from defects.
8(Tourque test)	-	500	Rs 500 for torque Testing.
4(Chemical Composition)	-	1460	C, Si, Mn, P, S = Rs 100/Element Cr, Mo, V, Ni, Cu, Al , Co, Sn= Rs 120/Element Total for chemical Testing =1460

Complete

17 Feb, 2025

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

All Grade,Type,Size and designation as per IS 1875:1992

13060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 12(Supplementary Requirements)	-	5000	Note; - Rs 4500/- for Blue Fracture Test and RS 500 for Bend Test.
Cl 7(Workmanship)	-	500	Rs 500/ sample for freedom from defects.
Cl 8(Diameter, Ovality & Weight)	-	1200	RS 1200/sample for inspection.
Cl 9(UTM & HBW)	-	1300	Rs 900 for Mechanical Test and Rs 400 for Hardness test . Note : Sample preparation charges extra.
Cl 12(Supplementary Requirements)	-	3400	Rs 400/ sample for Grain size, Rs 1000/ sample for Macro structure, Rs 1000/ Sample for UT, Rs 1000/sample MPI, Note: Sample preparation charges extra.
6.1, 6.2(cr + n + mo)	-	200	Rs 100 for (Cr+Ni+Mo) Rs 100 for (Cu+10 x % Sn)
6.1, 6.2(tin)	-	120	-
6.1, 6.2(boron)	-	120	-
6.1, 6.2(vanadium)	-	120	-
6.1, 6.2(molybdenum)	-	120	-
6.1, 6.2(copper)	-	120	-
6.1, 6.2(aluminium)	-	120	-
6.1, 6.2(phosphorus)	-	100	-
6.1, 6.2(sulphur)	-	100	-
6.1, 6.2(manganese)	-	100	-
6.1, 6.2(silicon )	-	100	-
6.1, 6.2(carbon)	-	100	-
6.1, 6.2(cromium)	-	120	-
6, table 1(Chemical Composition)	-	120	for Ni = Rs 120/Element If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element

Complete

17 Feb, 2025

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

All Grade ,Type ,Size, Designation as per IS 432 (II)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	300	- Only for P and S element minimum billing = Rs 600. - If “N " is required, then testing charges will be extra @ 2500/- per Sample for this element.
Clause 3.1.1(Phosphorus)	-	300	- Only for P and S element minimum billing = Rs 600. - If “N " is required, then testing charges will be extra @ 2500/- per Sample for this element.
Cl 4.1(Workmanship)	-	500	Rs 500/ sample for freedom from defects .
Cl 5 & 6(Diameter)	-	1200	Rs 1200/ sample for dimensional tolerance.
Cl 7(UTM)	-	900	RS 900/ sample for mechanical testing Sample preparation charges extra.
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	1000	RS 1000/ sample for Bend and Re Bend Test. Sample preparation charges extra.

Complete

17 Feb, 2025

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All Grade, Type, Size and designation as per IS 432

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	400	Rs 400/ sample for freedom from defects. sample Preparation Charges Extra. Rs. 1110 for Chemical Testing C, Si, Mn, P, S =Rs 90/Element Ni, Cr, Cu, V, Mo, Al = Rs 110/Element.
Cl 6.2(Diameter & Ovality)	-	600	RS 600/ sample for Nominal Size & Mass.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	800	Rs 800/ sample for Mechanical Testing sample Preparation Charges Extra.
Cl 9.3(Press)	-	500	Rs 500/ sample for Bend Test sample Preparation Charges Extra.
Cl 5.1(Workmanship)	-	400	Rs 400/ sample for freedom from defects. sample Preparation Charges Extra.
Clause -4, 4.3(TITANIUM)	-	110	Rs. 1110 for Chemical Testing C, Si, Mn, P, S =Rs 90/Element Ni, Cr, Cu, V, Mo, Al = Rs 110/Element.
Clause -4, 4.2(VANADIUM)	-	110	-
Clause -4, 4.1(NIOBIUM)	-	110	-
Clause -4, 4.1(Molybdenum)	-	110	-
Clause -4, 4.1(Chromium)	-	110	-
Clause -4, 4.1(Nickel)	-	110	-
Clause -4, 4.1( ALUMINIUM)	-	110	-
Clause -4, 4.1(SILICON)	-	90	-
Clause -4, 4.1(NITROGEN)	-	110	-
Clause -4, 4.1(MANGANESE)	-	90	-
Clause -4, 4.1(PHOSPHURS)	-	90	-
Clause -4, 4.1(SULPHUR)	-	90	-
Clause -4, 4.1( CARBON)	-	90	-

Complete

17 Feb, 2025

IS 7214 (1974)

Specification for driving squares for hand socket wrenches

All Grade / Type / Size / Designation etc. as per IS

3540 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Material testing)	-	1340	- C, Si, Mn, P, S - 100/- per element - Ni, Cr, Cu, V, Mo, Al, Ti - 120/- per element
2.0(Dimensions)	-	2200	Dim. = 1200/- Torque Testing = 500/- Workmanship & Finish= 500
3.0(Material testing)	-	0	-
2.0(Dimensions)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 05.12.2023

IS 273 (1990)

Picks and beaters - specification (Fourth Revision)

All Grade / Type / Size / Designation as per IS 273

3800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1200	-
4(Material testing)	-	1100	-
7(Workmanship and finish)	-	500	-
9.1(Drop Test)	-	500	-
9.2(Striking Test)	-	500	-
3(Dimensions)	-	0	-
4(Material testing)	-	0	-
7(Workmanship and finish)	-	0	-
9.1(Drop Test)	-	0	-
9.2(Striking Test)	-	0	-
3(Dimensions)	-	0	-
4(Material testing)	-	0	-
7(Workmanship and finish)	-	0	-
9.1(Drop Test)	-	0	-
9.2(Striking Test)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 05.12.2023

IS 2586 (1986)

Specification for bench vices (Second Revision)

All Grade/Type/Size/Designation as per IS 2586

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1200	-
4(Material testing)	-	10700	-
5(Mass)	-	200	-
6(Hardness)	-	800	-
8(Workmanship and finish)	-	500	-
11.1(Clamping test)	-	500	-
11.2(Slackness Test)	-	500	-
11.3(Eccentric test)	-	500	-
11.4(Performance Test)	-	500	-
3(Dimensions)	-	0	-
4(Material testing)	-	0	-
5(Mass)	-	0	-
6(Hardness)	-	0	-
8(Workmanship and finish)	-	0	-
11.1(Clamping test)	-	0	-
11.2(Slackness Test)	-	0	-
11.3(Eccentric test)	-	0	-
11.4(Performance Test)	-	0	-
3(Dimensions)	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 05.12.2023

IS 4296 : Part 3 (2015)

Tools for pressing: Part 3 round punches with 60 degree conical head and reduced shank (Second Revision)

All grade/Type/ Size/Designation as per IS

4370 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions & Tolerance)	-	1500	-
3(Surface Roughness)	-	1250	-
4(Material Testing)	-	1220	-
6.2(Hardness (HRC))	-	400	-
3(Dimensions & Tolerance)	-	0	-
3(Surface Roughness)	-	0	-
4(Material Testing)	-	0	-
6.2(Hardness (HRC))	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 05.12.2023

IS 4296 : Part 2 (2015)

Tools for pressing: Part 2 punches with cylindrical head and straight or reduced shank (First Revision)

All Grade/Type/Size/Designation as per IS 4296 -2

4370 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions & Tolerance)	-	1500	-
4(Surface Roughness)	-	1250	-
5(Material Testing)	-	1220	- C, Si, Mn, P, S - Rs. 100/- per element - Ni, Cr, V, Mo, Co, W- Rs. 120/- per element
5.2(Hardness (HRC))	-	400	-
4(Dimensions & Tolerance)	-	0	-
4(Surface Roughness)	-	0	-
5(Material Testing)	-	0	-
5.2(Hardness (HRC))	-	0	-

Complete

17 Feb, 2025

Included w.e.f. 05.12.2023

Bureau of Indian Standards

The National Standards Body of India

Institute for Auto Parts and Hand Tools Technology

A-9, Phase-V, Focal Point, Ludhiana, Ludhiana, Ludhiana, Punjab, 141010

8427262400 iatldh@iapht.org

Scope List