BIS - LIMS (Laboratory Information Management System)

QVC Certification Services Pvt. Ltd.

2-B, CIVIL LINES, YUKTI BUSINESS CENTRE, JAIL ROAD, NEAR OLD SESSION COURT, AMBALA,HARYANA, INDIA, Ambala City, Ambala, Haryana, 134003

9996040735 cemark@qvccert.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

Single/Multicore PVC cable upto 630sq.mm sheath/unsheath

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	5000	-
10.4(Flammability test- Unaffected portion)	-	750	-
10.4(Flammability test-Burning after flame removal)	-	750	-
table 1 e) 3) (IR constant- max. Temp)	-	750	-
table 1 e) 3) (IR constant- Room temp )	-	750	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	0	The charges are considered in IR constant Test
table 1 e) 3) (Volume Resistivity - Room temp )	-	0	The charges are considered in IR constant Test
10.2(HV (room temperature))	-	1500	-
10.1(HV (water immersion))	-	5000	-
10.1(HV (water immersion))	-	0	Added in other entry
10.8(Smoke density rating)	-	2500	-
10.6(Halogen evolution)	-	2500	-
10.7(Temperature index)	-	2000	-
10.5(Oxygen index)	-	2000	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	750	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	750	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	750	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	750	-
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	750	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	750	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1000	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	750	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	750	-
Table 1 iii) d) 4)(Cracks Observed)	-	0	Test charges are considered in the Shrinkage Test -Sheath
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	750	-
Table 1 iii) c) 4)(Cracks Observed)	-	0	Test charges are considered in the Shrinkage Test -insulation
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	750	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	0	Test charges are considered in the Tensile Strength Test
Table 1 iii) d) 3)(Sheath- TS variation)	-	0	Test charges are considered in the Tensile Strength Test
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	0	Test charges are considered in the Tensile Strength Test-After Ageing
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	0	Test charges are considered in the Tensile Strength Test-After Ageing
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	1500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	0	Test charges are considered in the Tensile Strength Test-(Without ageing)
Table 1 iii) c) 3)(Elongation variation)	-	0	Test charges are considered in the Tensile Strength Test-(After ageing)
Table 1 iii) c) 3)(TS variation)	-	0	Test charges are considered in the Tensile Strength Test-(After ageing)
Table 1 iii) c) 3)(Elongation (After ageing))	-	0	Test charges are considered in the Tensile Strength Test-(After ageing)
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	0	Test charges are considered in the Tensile Strength Test-(After ageing)
Table 1 iii) c) 1)(Elongation (Without ageing))	-	0	Test charges are considered in the Tensile Strength Test-(without ageing)
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	1500	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	0	Added in other entry
5.2(Application )	-	0	-
5.3(Thickness of Insulation)	-	0	-
9.1(Ovality)	-	0	-
9(Overall dimensions)	-	1000	-
10.11(Per sulphate test (for tinned Cu cable only))	-	1500	-
4.2(Conductor resistance test)	-	1500	-
4.1(Wrapping test (for Al))	-	1000	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	1000	-
4.1(Annealing test (for copper))	-	1000	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.1(Conductor - Material)	-	0	-
4.1(Conductor - Material)	-	0	-
10.11(Persulphate Test )	-	0	already added
12.0(Core identification)	-	0	-
4, IS 8130(Construction of conductor)	-	0	-
Table 2, IS 8130(No fo wire in a conductor)	-	0	-
8.3(Minimum thickness of Sheath)	-	0	Test charges are considered in the overall dimensions
8.3(Avarage thickness of Sheath)	-	0	Test charges are considered in the overall dimensions
5.3(Minimum thickness of insulation)	-	0	Test charges are considered in the overall dimensions
5.3(Avarage thickness of insulation)	-	0	Test charges are considered in the overall dimensions
table 1, 4.2(insulation resistance test)	-	0	Test charges are considered in the conductor resistance test
5.4(Mechanical properties before and after ageing)	-	0	Test charges are considered in the tensile Strength test
4.1(Material)	-	0	-
4.2(Electrical Resistance)	-	0	-
5(INSULATION)	-	0	-
6(FILLER)	-	0	-
7(BINDER TAPE)	-	0	-
8(SHEATH)	-	0	-
9(OVERALL DIMENSIONS)	-	0	Added in other entry
10.1(High Voltage Test (Water Immersion Test))	-	0	Added in other entry
10.2(High Voltage Test (at Room Temperature))	-	0	Added in other entry
10.4(Flammability Test)	-	0	Added in other entry
10.5(Oxygen Index Test)	-	0	Added in other entry
10.6(Test for Halogen Acid Gas Evolution)	-	0	Added in other entry
10.7(Test for Temperature Index)	-	0	Added in other entry
10.8(Smoke Density Rating)	-	0	Added in other entry
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	0	Added in other entry
10.11(Persulphate Test)	-	0	Added in other entry
11(IDENTIFICATION)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
13(CABLE CODE)	-	0	-
15(PACKING AND MARKING)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	0	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	0	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	0	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	0	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	0	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Cl. 8.2(Application of Sheath)	-	0	-
10.3(Spark Test)	-	0	In exclusion list
10.3(Spark Test)	-	0	In exclusion list
Table 4(Copper purity test)	-	0	In exclusion list
10.3(Spark test)	-	0	In exclusion list
10.1(Flex Test)	-	0	In exclusion list
5.3(Thickness of Insulation)	-	0	Added in other entry
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
table 1, 4.2(insulation resistance test)	-	0	Added in other entry
5.4(Mechanical properties before and after ageing)	-	0	Added in other entry
4.1(Material)	-	0	-
4.2(Electrical Resistance)	-	0	Added in other entry
5(INSULATION)	-	0	-
6(FILLER)	-	0	-
7(BINDER TAPE)	-	0	-
8(SHEATH)	-	0	-
9(OVERALL DIMENSIONS)	-	0	Added in other entry
10.1(High Voltage Test (Water Immersion Test))	-	0	Added in other entry
10.2(High Voltage Test (at Room Temperature))	-	0	Added in other entry
10.4(Flammability Test)	-	0	Added in other entry
10.5(Oxygen Index Test)	-	0	Added in other entry
10.6(Test for Halogen Acid Gas Evolution)	-	0	Added in other entry
10.7(Test for Temperature Index)	-	0	Added in other entry
10.8(Smoke Density Rating)	-	0	Added in other entry
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	0	Added in other entry
10.11(Persulphate Test)	-	0	Added in other entry
11(IDENTIFICATION)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
13(CABLE CODE)	-	0	-
15(PACKING AND MARKING)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	0	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	0	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	0	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	0	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	0	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Cl. 8.2(Application of Sheath)	-	0	-
10.3(Spark Test)	-	0	In exclusion list
10.3(Spark Test)	-	0	In exclusion list
10.1(Flex Test)	-	0	In exclusion list
10.3(Spark test)	-	0	In exclusion list
Table 4(Copper purity test)	-	0	In exclusion list
5.3(Thickness of Insulation)	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
table 1, 4.2(insulation resistance test)	-	0	-
5.4(Mechanical properties before and after ageing)	-	0	-
4.1(Material)	-	0	-
4.2(Electrical Resistance)	-	0	-
5(INSULATION)	-	0	-
6(FILLER)	-	0.01	-
7(BINDER TAPE)	-	0	-
8(SHEATH)	-	0	-
9(OVERALL DIMENSIONS)	-	0	-
10.1(High Voltage Test (Water Immersion Test))	-	0	-
10.2(High Voltage Test (at Room Temperature))	-	0	-
10.4(Flammability Test)	-	0	-
10.5(Oxygen Index Test)	-	0	-
10.6(Test for Halogen Acid Gas Evolution)	-	0.01	-
10.7(Test for Temperature Index)	-	0	-
10.8(Smoke Density Rating)	-	0	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	0.01	-
10.11(Persulphate Test)	-	0	-
11(IDENTIFICATION)	-	0	-
12(CORE IDENTIFICATION)	-	0.01	-
13(CABLE CODE)	-	0	-
15(PACKING AND MARKING)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0.01	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	0	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0.01	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	0	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	0	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	0	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	0	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Cl. 8.2(Application of Sheath)	-	0	-
10.3(Spark Test)	-	0	In exclusion list
10.3(Spark Test)	-	0	In exclusion list
10.1(Flex Test)	-	0	In exclusion list
10.3(Spark test)	-	0	In exclusion list
Table 4(Copper purity test)	-	0	In exclusion list

Complete

12 Jan, 2026

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

S.C/M.C/PVC cable upto 630sqmm Sh/UnSh/Armour/Unarmour

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	0	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	0	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	0	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	0	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	0	-
13.5.2(ARMOURING : Resistance)	-	0	-
13.6 a)(ARMOURING: Tensile Strength)	-	0	-
13.6 b)(ARMOURING: Elongation )	-	0	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	200	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	200	-
13.6 g)(ARMOURING: Resistivity)	-	200	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	0	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	0	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1500	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1500	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1500	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	0	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	0	Considered in another test
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	0	Considered in another test
15.1 d)1)(Physical tests for sheath : Elongation )	-	0	Considered in another test
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	Considered in another test
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	Considered in another test
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	Considered in another test
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	Considered in another test
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	Considered in another test
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	Considered in another test
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	Considered in another test
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	750	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	Considered in another test
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	750	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	Considered in another test
15.1 d)4)(Hot deformation : Insulation )	-	1000	-
15.1 d)4)(Hot deformation : Sheath )	-	1000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1500	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1500	-
15.1 d)6)(Heat shock test- Insulation )	-	750	-
15.1 d)6)(Heat shock test- sheath )	-	750	-
15.1 d)7)(Thermal stability- insulation )	-	750	-
15.1 d)7)(Thermal stability- Sheath )	-	750	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	750	-
15.1 e)(Insulation resistance test : IR Constant )	-	750	-
15.1 f)(High voltage test ( water immersion test ))	-	5000	-
15.1 g)(High voltage test at room temperature)	-	1500	-
15.1 g)(High voltage test at room temperature)	-	1500	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	750	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	750	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	750	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	749.99	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	Considered in another test
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0	Considered in another test
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	0	Considered in another test
16.4(Flammability Test)	-	750	-
16.5(Oxygen Index Test)	-	2000	-
16.6(Flame Retardance Test on Single Cables)	-	1500	-
16.7(Flame Retardance Test on Bunched Cables)	-	0	In exclusion list
16.9(Test for Halogen Acid Gas Evolution)	-	2500	-
16.1(Temperature Index)	-	2000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	Considered in another test
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	Considered in another test
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	Considered in another test
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	0	Considered in another test
16.4(Flammability Test- Un affected portion)	-	0	Considered in another test
16.4(Flammability Test- Period of Burning)	-	0	Considered in another test
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	2500	-
Cl No. 16.8(Test for specific optical density of smoke)	-	0	In exclusion list
Table 4(Copper purity test)	-	0	In exclusion list
13.3(Armouring : Dimensions -Formed wire )	-	0	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Flexibility class)	-	0	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	0	Considered in another test

Complete

12 Jan, 2026

-
Included w.e.f 09.04.2025 Exclusion: Table 4 (Copper purity test), Cl No. 16.8 (Test for specific optical density of smoke), Cl 16.7 (Flame Retardance Test on Bunched Cables)

IS/IEC 60079 : PART 31 (2013)

Explosive atmospheres: Part 31 equipment dust ignition protection by enclosure "T" (First Revision)

Equipment used in Group III explosive atmosphere

72000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Observation)	-	0	-
4.2(Observation)	-	0	-
4.3(Observation)	-	0	-
4.4(Observation)	-	0	-
5(Observation)	-	1000	-
6.1.1(Thermal conditioning, impact test, and drop test if applicable)	-	35000	-
6.1.1.2(Impact test)	-	5000	-
6.1.1.3(Apply pressure)	-	10000	-
6.1.1.4(IP6X / IP5X test)	-	15000	-
6.1.2(Temperature measurement)	-	5000	-
6.1.1.1(Thermal Endurance to heat, Thermal Endurance to Cold & Impact Test)	-	0	Charges as applicable for Cl.6.1.1
6.1.1.2(Impact test for supplementary enclosure)	-	0	Added above
6.1.1.3(Pressure test)	-	0	Added above
6.1.1.4(Ingress Protection test)	-	0	Added Above
7(Observation)	-	1000	-

Complete

12 Jan, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

QVC Certification Services Pvt. Ltd.

2-B, CIVIL LINES, YUKTI BUSINESS CENTRE, JAIL ROAD, NEAR OLD SESSION COURT, AMBALA,HARYANA, INDIA, Ambala City, Ambala, Haryana, 134003

9996040735 cemark@qvccert.com

Scope List