BIS - LIMS (Laboratory Information Management System)

BIS, Guwahati Branch Laboratory (GBL)

2nd Floor, West End Block, Housefed Building Complex, Last Gate, Dispur, Guwahati, Assam 781006, GUWAHATI, Kamrup, Assam, 781006

9641193329 gbol@bis.gov.in

Scope List

Reset

36 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 3603 (1988)

Specification for seamless aluminium bottles (First Revision)

3350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Pattern)	-
4.2 (Dimensions and Tolerances)	-
4.3 (Material)	-
4.5 (Air Pressure Test)	-
5 (Marking)	-
Cl-3 (Capacity)	-

-
Qty. required For physical Test = 6 Pcs

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

3550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2, Table 1 to 6 (Length , A -IS 12817)	-
6.2, Table 1 to 6 (Breadth, B-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B1-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B2-IS 12817)	-
6.2, Table 1 to 6 (Thickness of flap, C-IS 12817)	-
6.2, Table 1 to 6 (Dia. of Hinge pin, D-IS 12817 )	-
6.2, Table 1 to 6 (Number of Knuckles- IS 12817 )	-
6.2, Table 1 to 6 (Number of Screw Holes -IS 12817 )	-
6.2, Table 1 to 6 (Holes for Screw Number- IS 12817 )	-
7.1 (General - IS 12817 )	-
7.2 (Knuckles - IS 12817 )	-
7.3 (Pins- IS 12817 )	-
7.4 (Screw Holes- IS 12817 )	-
7.4.2 (Position of screw holes - IS 12817 )	-
7.4.2, Fig 1 (The distance of the screw holes from the end of the flap - IS 12817 )	-
8.0 (Finish - IS 12817 )	-
Clause 4.1.2 (Silicon (Pin) )	-
Clause 4.1.2 (Phosphorus (Pin) )	-
Clause 4.1.2 (Sulphur (Pin) )	-
Clause 4.1.2 (Manganese (Pin) )	-
Clause 4.1.2 (Carbon (Pin) )	-
Clause 4.1.1 (Silicon (Flap) )	-
Clause 4.1.1 (Phosphorus (Flap) )	-
Clause 4.1.1 (Sulphur (Flap) )	-
Clause 4.1.1 (Manganese (Flap) )	-
Clause 4.1.1 (Carbon (Flap) )	-
Clause 7.4.2 (Dimension - Z )	-
Clause 7.4.2 (Dimension - Y )	-
Clause 7.4.2 (Dimension - X )	-
Clause 7.4.1 (Number of holes)	-
As per Cl.4 (Carbon)	-
As per Cl.4 (Sulphur)	-
As per Cl.4 (Phosphorus)	-
As per Cl.4 (Manganese)	-
As per Cl.4 (Nitrogen)	-
As per Cl.4 (Silicon)	-
As per Cl.4 (Aluminium)	-
As per Cl.4 (Chromium)	-
As per Cl.4 (Vanadium)	-
As per Cl.4 (Molybdenum)	-
As per Cl.4 (Niobium)	-
As per Cl.4 (Nickel)	-
As per Cl.4 (Copper)	-
As per Cl.4 (Titanium)	-
As per Cl.4 (Zirconium)	-
As per Cl.4 (Tungsten)	-
As per Cl.4 (Cerium)	-
Cl.4 (Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-

-
Qty. required For physical Test = 10 Pcs

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

3550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Tables 2 to 9 (Types)	-
5.1 Tables 2 to 9 (2) (Size of Hinge)	-
5.1 Tables 2 to 9 (3) (Length A)	-
5.1 Tables 2 to 9 (4) (Breadth B)	-
5.1 Tables 2 to 9 (4) (Breadth B1)	-
5.1 Tables 2 to 9 (4) (Breadth B2)	-
5.1 Tables 2 to 9 (5) (Thickness of Flap C)	-
5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D)	-
5.1 Tables 2 to 9 (7) (Number of Knuckles)	-
5.1 Tables 2 to 9 (8) (Number of Screw Holes)	-
5.1 Tables 2 to 9 (9) (Holes for Screw No.)	-
6.1 (General)	-
6.2.1 (Knuckles)	-
6.3 (Pins)	-
6.4 (Screw Holes)	-
6.4.2 (Position of Holes)	-
6.4.2 (X)	-
6.4.2 (Y)	-
6.4.2 (Z)	-
6.4.2.1 (Position of Holes)	-
7 (Finish)	-
TABLE-1 (Clause-4) (TITANIUM)	-
TABLE-1 (Clause-4) (VANADIUM)	-
TABLE-1 (Clause-4) (NIOBIUM)	-
TABLE-1 (Clause-4) (Molybdenum)	-
TABLE-1 (Clause-4) (Chromium)	-
TABLE-1 (Clause-4) (Nickel)	-
TABLE-1 (Clause-4) ( ALUMINIUM)	-
TABLE-1 (Clause-4) (SILICON)	-
TABLE-1 (Clause-4) (NITROGEN)	-
TABLE-1 (Clause-4) (MANGANESE)	-
TABLE-1 (Clause-4) (PHOSPHURS)	-
TABLE-1 (Clause-4) (SULPHUR)	-
TABLE-1 (Clause-4) ( CARBON)	-
8 (Marking)	-

-
Qty. required for physical Test = 10 Pcs

IS 8917 (1978)

Specification for steel plates for galvanizing pots

4850.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Dimension)	-
8 (Grain Size)	-
4 (Freedom From Defects)	-
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon)	-

-
Qty. required Physical Test= 1 m, Chemical Test= 5 Pcs of each length 5 cm

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

7200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
Cl 8 (Freedom from defects)	-
Cl. 9 (Out of Shape)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
Table 1 Note 3 (Copper)	-
Amendment 1 (Niobium)	-
Amendment 1 (Vanadium)	-
Amendment 1 (Titanium)	-
Amendment 1 (Micro Alloying Element (Nb+V+Ti))	-
9.1 (Diameter - SOP-MT-23)	-
9.3 (Out of Shape - SOP-MT-23)	-
11 (Marking)	-
Cl 9 ("1.Outer dia (08) 2.Out of shape (08)")	-
Cl 9 (Avarage Outer dia (08))	-
Cl 9 (Maximum Out of shape (08))	-

-
Qty. required physical Test= 2 m, Chemical Test= 5 Pcs of each length 5 cm

IS 10079 (1982)

Specification for cylindrical metal measures for use in tests of aggregates and concrete

2400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1, Table 1 (Dimensions - Capacity)	-
4.1, Table 1 (Dimensions - Inside Diameter, A)	-
4.1, Table 1 (Dimensions - Thickness of metal (Min) - Wall, C)	-
4.1, Table 1 (Dimensions - Thickness of metal (Min) - Bottom, D)	-
5.1 (Construction)	-
6.1.1 (Accessories - Tamping Rod - Dia)	-
6.1.1 (Accessories - Tamping Rod - Length)	-
6.1.1 (Accessories - tamping rod)	-
6.2.1 (Accessories - Tamping Bar - tamping face (square))	-
6.2.1 (Accessories - Tamping Bar - Length)	-
6.2.1 (Accessories - Tamping Bar - Weight)	-
6.2.1 (Accessories - Tamping Bar)	-
7.1 (Marking)	-
7.1 (Marking)	-

-
i) Qty. required Cylindrical metal measure -1 No ii) Accesories - Tamping Rod/ Tamping Bar - 1 No. iii) Disable

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-

-
Except "Cl. 6.5 (Transverse Strength Test (Optional))", Retain as partial

IS 6909 (1990)

Supersulphated cement ? specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2 (Soundness (cold expansion) by Le Chatelier- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Chloride content)	-

-
Except "Cl. 6.5 (Transverse Strength Test (Optional))", Retain as partial

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

12900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration - 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-

-
Qty. required (8+1) kg Except sulphate expansion and transverse test (optional). Retain as partial.

IS 12600 (1989)

Portland cement, low heat - specification

9700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 v ( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.2 (Lime after deduction of that necessary to combine with Sulphuric anhydride - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 note 2 (Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-

-
Except "Cl. 6.7 (Heat of Hydration), Cl. 6.5 (Transverse Strength test (Optional))", Retain as partial

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.1 (Dimensions -length)	-
Cl-7.2 (Thickness)	-
Cl-7.3 (Squareness)	-
Cl-8.1, 8.2 (Workmanship and finish)	-
Cl-10.3 (Moisture Content)	-
Cl-10.4.1 (Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-
Cl-10.4.2 (Glue Adhesion in Dry State - Adhesion of Plies)	-
Cl-10.5, 10.5.1 (Resistance to water test- glue shear strength- WOOD Failure, Average)	-
Cl-10.5.1.1 (Water Resistance Test-Glue shear strength)	-
Cl-10.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-10.5.2 (Water Resistance Test (Alternate method))	-
Cl-10.6 (Water resistance test (Concrete shuttering Plywood))	-
Cl-10.7.1, Table-2 (Mycological Test- Glue shear strengt)	-
Cl-10.7.2 (Mycological Test- Adhesion of plies)	-
Cl-10.8 (Tensile Strength)	-
Cl-10.9, Table-3 (i) (Along (parallel to the grain direction of the face veneer))	-
Cl-10.9, Table-3 (ii) (Across (perpendicular to the grain direction of the face veneer))	-
Cl-10.10, Table-4 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-10.10, Table-4 (i) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-10.11 (Retention of Preservative)	-
Cl-10.12 (Formaldehyde Content Test)	-
Cl-10.8 (b) (Tensile strength)	-
Cl-10.8 (c) (Tensile strengths in both directions)	-
Cl-5.1 (Timber)	-
Cl-5.2 (Adhesives for Bonding of Veneers)	-
Cl-6.1 (Manufacture)	-
Cl-6.2 (Manufacture ( Thickness of veneers))	-
Cl-6.3 (Manufacture ( Physical and mechanical properties of veneers))	-
Cl-6.4, 6.7 (Manufacture (Plywood for concrete shuttering))	-
Cl-6.5 (Manufacture (Scarf joints))	-
Cl-6.6 (Manufacture ( Preservative treatment))	-
Cl-10.13 (Steady-State Formaldehyde Emission Test)	-
Cl-10.10, Table-4 (ii) a (Wet Bending Strength:- Modulus of Rupture: Across the Face Grain: Average))	-
Cl-10.10, Table-4, (ii) b (Wet Bending Strength; (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2 (Average Wood Failure)	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2 (Average Failure Load, N -Dry State)	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2 (Average Failure Load, N- Resistance to Water)	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2 (Average Failure Load, N - Resistance to Micro-Organisms)	-
Cl-10.8 (a) (Tensile strength)	-
Cl-7.1 (Dimensions (width))	-
Cl-7.3 (Edge Straightness)	-
Cl. 12, 12.1 (Marking)	-
Cl. 12, 12.3 (BIS Certificate Marking)	-
Cl. 10.9 (Table 3) ((Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.9 (Table 3) ((Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.9 (Table 3) ((Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.9 (Table 3) ((Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.9 (Table 3) ((Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.9 (Table 3) ((Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.9 (Table 3) ((Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.9 (Table 3) ((Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.10 (Table 4) ((Modulus of Rupture: Along the Face Grain: Average) Wet Bending)	-
Cl. 10.10 (Table 4) ((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl. 10.10 (Table 4) ((Modulus of Elasticity: Along the Face Grain: Minimum Individual) Wet Bending)	-
Cl. 10.10 (Table 4) ((Modulus of Elasticity: Along the Face Grain: Average) Wet Bending)	-

-
Qty. required 2 No. i) Except Steady-State Formaldehyde Emission Test (Optional Test). ii) Test facility available for thickness upto 25 mm iii) To be completed

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3 (Treatment)	-
Cl-5.4 (Moisture Content)	-
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.5.2 (Water Resistance Test)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (i) b ((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.4.2 (Adhesion of Plies)	-
Cl-4.1 (Timber)	-
Cl-4.2 (Adhesive)	-
Cl-5.1 (Veneers)	-
Cl-5.2.1 (Glueing)	-
Cl -5.2.2 (Thickness of Veneers)	-
Cl - 5.2.3.1 (Joint in Veneers)	-
Cl - 5.2.3.2 (Edge joints)	-
Cl - 5.2.3.3 (End joints)	-
Cl - 5.2.3.4 (Scarf joints)	-
Cl - 5.2.4 (Grain Direction)	-
5.1.1 (Defects in veneers)	-
Cl-9.12 (Steady-State Formaldehyde Emission Test)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (ii) a ((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (ii) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-6.1 (Dimensions (width))	-
Cl-8.3 (Edge Straightness)	-
Cl-11.1 (Marking)	-
Cl-11.3 (Marking)	-
Cl. 9.9 (Table 3) ((Modulus of Rupture: Along the Face Grain: Minimum Individual) Wet Bending)	-
Cl. 9.9 (Table 3) ((Modulus of Rupture: Along the Face Grain: Average) Wet Bending)	-
Cl. 9.9 (Table 3) ((Modulus of Elasticity: Along the Face Grain: Minimum Individual) Wet Bending)	-
Cl. 9.9 (Table 3) ((Modulus of Elasticity: Along the Face Grain: Average) Wet Bending)	-

-
Qty. required 2 No. i) Except Steady-State Formaldehyde Emission Test (Optional Test). ii) Test facility available for thickness upto 25 mm iii) To be completed

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.7 (Steady-State Formaldehyde Emission Test)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl. 4 (Grades)	-
Cl.5.1 (Type based on classification by appearance)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl.8.1 (Dimensions -width)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-13 (Marking)	-

-
Qty. required 2 No. i)Except Steady-State Formaldehyde Emission Test (Optional Test). ii) Test facility available for thickness upto 25 mm iii) To be completed

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5)	-
6.1 (Load Bearing Capacity Test - Cl. 6.1, IS 5913)	-
7 (General Appearance and Finish - Cl. 7.1)	-
7 (General Appearance and Finish - Cl. 7.2)	-
12 (Marking - Indication of source of manufacture - Cl. 12)	-
12 (Marking - Year & Date of manufacture - Cl. 12)	-
12 (Marking - Pictorial warning signs as given in IS 12081 (Part 2) : 1987 - Cl. 12)	-
6.2 (Impermeability)	-

-
Qty. required 3 Sheets (Full size), Retain as partial

IS 723 (2023)

Steel Countersunk Head Wire Nails ï¿½ Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions & tolerances (Except 120° angle))	-
4.2 (Bend of shank)	-
6 (Finish)	-
7 (Bend test)	-

-
Qty. required 40 Pcs nails

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2 (Capacity)	-
7.3, 7.3.1, 7.3.2 (Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-
7.8 (Staining test)	-
7.11 (Load test)	-
7.4 (Test for strength of shoulder strap)	-
7.5 (Test for cord)	-
7.7 (Leakage test)	-
9.1 (Marking)	-
7.13 (pH value)	-
7.13 (Turbidity)	-
7.13 (Odour)	-
7.13 (Taste threshold)	-
5 (Manufacture and Workmanship)	-
7.13 (Taste threshold)	-
7.13 (Total dissolved solids)	-
7.13 (Odour)	-
7.10 (Stability test)	-
7.13 (Colour, Hazen units)	-
7.9 (Lever, device for operating or Regulating flow test)	-

-
Qty. required 6 Nos+1 Nos Except Leaching Test, Retain as partial

IS 10701 (2012)

Structural plywood - Specification (First Revision)

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.3 (Glue Shear strength in dry state)	-
11.4.1 (Resistance to Water)	-
11.4.2 (Resistance to Water)	-
11.5 (Resistance to Micro-organisms)	-
11.6 (Tensile Strength)	-
11.8 (Wet Bending Strength)	-
11.7.1 (Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-
Clause. 7.4 (Moisture content)	-
Cl-11.9 (Retention of preservatives)	-

-
Qty. required 2 Nos. i) Excluding Panel Shear Test (Cl. 11.7.1, Table 3) ii) Test facility available for Sl. no. ii of Table 3 (Compressive Strength Test) up to 5 mm thickness. iii) Test facility available for Sl. no. vi of Table 3 (Modulus of Rigidity Test/ Plate Shear Strength Test) up to 16 mm thickness. iv) Static Bending Strength upto 25 mm thickness. v) Retain as partial

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

GRADE 1 AND 2

8200.00 (complete testing charges) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Shape)	-
3.2 & 8.2 (Indivisual Height)	-
3.2 & 8.2 (Indivisual Width)	-
3.2 & 8.2 (Indivisual Length)	-
3.3 (Faces & Arises)	-
7 (SURFACE TEXTURE AND FINISH)	-
8.1.1 (General (Exposed wall construction))	-
8 (Physical requirments)	-
8.3 (Physical requirments- Block density)	-
8.4 (Physical requirments- Compressive strength)	-
8.6 ( Drying Shrinkage )	-
8.5 (Thermal Conductivity)	-
8.4, 9.2 & 11.3 (Indivisual Moisture Content)	-
8.4, 9.2 & 11.3 & Table 1 (Indivisual Compressive strength)	-
15 (Marking)	-

-
Qty. required 24 No.s

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Variation in thickness)	-
11.1 (Dimensions - Squareness)	-
11.12 (End immersion test)	-
11.13 (Knife Test)	-
11.14 (Glue Adhesion Test)	-

-
i) Qty. required 1 Nos. ii) Except "Impact Indentation Test, Flexure Test, Edge Loading Test, Shock Resistance Test, Buckling Resistance Test, Slamming Test, Misuse Test" iii) To be completed

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 (Table 1) (b) 6 mm and above)	-
8.1 (Dimensions)	-
8.2 (Thickness)	-
8.3, Taable-1 (i) (Tolerance- Length)	-
9 (WORKMANSHIP AND FINISH)	-
12.1 Table - 2 (i) (Moisture content, percent, Max)	-
12.2 (Other Tests)	-
14 (Marking)	-
4.2 (Flame retardant and preservative treatment)	-

-
Qty. required 1 Nos. i) "Except Flammability Rate of Burning Flame Penetration" ii) Test facility available for thickness upto 25 mm iii) To be completed

IS 4822 (1981)

Specification for brass cooking utensils (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 2 (grades)	-
cl. 4, fig. 1, fig. 2, fig. 3, fig. 4, fig. 5, fig. 6 (diameter, D)	-
cl. 4, fig. 1, fig. 2, fig. 3, fig. 4, fig. 5, fig. 6 (thickness of sheet)	-
cl. 4, fig. 1, fig. 2, fig. 3, fig. 4, fig. 5, fig. 6 (max permissible reduction in thickness)	-
cl. 5 (workmanship and finish)	-
cl. 6 (other requirements)	-
cl. 7 (marking)	-
cl. 7.1 (ISI certification marking)	-

-
Disabled.

IS 11100 (1984)

Specification for sweeping brooms

3150.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 3.1 (bamboo strips)	-
cl. 4.1, 5.1, fig. 1 (split bamboo strips extending beyond ring)	-
cl. 4.1, 5.1, fig. 1 (split bamboo strips - maximum length)	-
cl. 4.1, 5.1, fig. 1 (split bamboo strips - minimum length)	-
cl. 4.3, fig. 2 (plug length)	-
cl. 4.3, fig. 2 (plug thick end diameter)	-
cl. 4.4, fig. 3 (ring - smaller diameter)	-
cl. 4.4, fig. 3 (ring - larger diameter)	-
cl. 4.4, fig. 3 (ring - overlap length)	-
cl. 4.4, fig. 3 (ring - thickness)	-
cl. 4.5 (manufacture - strips)	-
cl. 5.2 (mass)	-
cl. 6.1 (workmanship and finish)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.2 (minor defects)	-
cl. 8.2.2 (minor defects)	-
cl. 9.1 (marking)	-
cl. 9.2 (marking)	-

-
-

IS 1976 (1976)

Specification for rotary paddy weeder, manually - Operated (Second Revision)

Rs.-8950.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 4.1 (Size - Width)	-
cl. 5.1 (Weeding Roll)	-
cl. 5.1.1 (Tines)	-
cl. 5.1.2 (Axle)	-
cl. 5.1.3 (Bearings)	-
cl. 5.1.4 (Washer)	-
cl. 5.2 (Float (Sleigh))	-
cl. 5.3 (Frame)	-
cl. 5.4 (Arm Piece (Yoke))	-
cl. 5.5 (angle regulator)	-
cl. 5.6 (handle)	-
cl. 6.1 (workmanship and finish)	-
cl. 6.2 (workmanship and finish)	-
cl. 6.3 (workmanship and finish)	-
cl. 6.4 (workmanship and finish)	-
cl. 7.1 (marking)	-
cl. 7.1.1 (marking)	-
cl. 7.1.2 (marking)	-

-
Disabled.

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (chem) (MATERIAL)	-
4.6.2 (TRANSPARANCY)	-
Cl. 4.6.3 (Cl. 4.6.3 Vibration Leakage)	-
Cl. 4.6.3 (Cl. 4.6.3 Air Pressure Leakage)	-
Cl. 4.6.3 ( Cl. 4.6.3 Closure Leakage)	-
4.6.4 (DROP TEST)	-
Cl. 4.6.5 (Cl. 4.6.5 Migration)	-
4.6.6 (PORTABILITY TEST)	-
Cl. 4.6.3 (Cl. 4.6.3 Vibration Leakage)	-
Cl. 4.6.3 (Cl. 4.6.3 Air Pressure Leakage)	-
Cl. 4.6.5 (chem) (Cl. 4.6.5 Overall migration (Caps))	-
Cl. 4.6.5 (chem) (Cl. 4.6.5 Color migration (Caps))	-
Cl. 4.2 (Cl. 4.2 Design, Shape & Dimension)	-
Cl. 4.3.2 (Cl. 4.3.2 Finish & Appearance)	-
Cl. 4.4 (a) (Capacity)	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Top))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Middle))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Bottom))	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i) (Barium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii) (Cobalt)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii) (Copper)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv) (Iron)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v) (Lithium)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi) (Manganese)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vii) (Zinc)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (viii) (Antimony)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix) (Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-

-
Qty. required Jars- 10 filled + 6 empty+40 Caps; Bottles: 15 filled+18 empty+40 Caps Disable

IS 16415 (2015)

Composite cement - Specification

Rs.9150/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 and Table 3 i (Fineness IS 4031(Part 2))	-
7 and Table 3 ii a (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
7 and Table 3 ii b (Soundness, Autoclave expansion IS 4031(Part 3) )	-
7 and Table 3 iii a (Setting Time ( by Vicat Apparatus), Initial IS 4031(Part 5))	-
7 and Table 3 iii b (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
7 and Table 3 v (Drying shrinkage IS 4031(Part 10))	-
7 and Table 3 iv a (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
7 and Table 3 iv b (Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-
7 and Table 3 iv c (Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-
6 -Table - 2 i (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
6 -Table - 2 ii (Magnesia - Cl 4.8 of IS 4032:1985)	-
6 -Table - 2 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
6 -Table - 2 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-
6 -Table - 2 v (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
6 -Table - 2 vi (Chloride content - Cl 4.13 of IS 4032:1985)	-
Cl. 6.1,Table 2 (Alkali content)	-

-
Qty. required (8+1) kg Except Transverse Strength Test (Optional), Retain as partial

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Rs.8420/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-

-
Qty. required (8+1) kg Except Transverse Strength Test (Optional), Retain as partial

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12 (Workmanship)	-
Cl 13 (Weight)	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-
Cl.12 (Freedom from defects)	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-
Cl. 14 & Cl. 15 (Depth of corrugation (average of 4))	-
Cl. 14 & Cl. 15 (Pitch of corrugation (average of 4))	-
Cl. 17 (Marking )	-
Cl 10 (Galvanising Test)	-
7.4 (Mass of Coating: Single Spot Test)	-
7.4 (Mass of Coating: Triple Spot Test)	-
7.1 & 10.2 (Mass of Coating: Triple Spot Test)	-
7.1 & 10.2 (Mass of Coating: Single Spot Test)	-

-
Qty. required Mech - 2 nos. of 0.5 m x 0.5 m Chem - 5 Pcs of 5 cm x 5 cm i. Table-1, Clause 5.1 Chemical Analysis test facility not available. ii. Bend test facility not available. iii) Retain as partial

IS 2098 (1997)

Asbestos cement building boards - Specification (First Revision)

3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 Table 1 & 7.1 (TESTS-Measurement of Thickness )	-
8.4 (TESTS-Water Absorption Test )	-
11 (MARKING-Each board shall be stamped or marked by any suitable method on non weathering side with the following information: )	-
Cl. 7.1 Table -1 (Cl. 7.1 ,Table-1 (Length))	-
Cl. 7.1 Table -1 (Cl. 7.1 , Table-1 (Width))	-
Cl. 7.2 Table -1 (Cl. 7.1 , Table-1 (Thickness))	-
Cl.6 (General apperance and finish)	-
Cl. 8.2 (Cl. 8.2 ,Tests-Load Bearing Capacity test, Class A/B/C ,Average Load)	-
Cl. 8.2 (Cl. 8.2 ,Tests-Load Bearing Capacity test, Class-A/B/C , Individual Load )	-

-
Qty. required 2 Sheets (Full size)

IS 1626 : Part 3 (1994)

Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings - Part 3 : Roofing Fittings

Rs.3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 (Shapes)	-
6.1 (Physical requirements)	-
7 (Genaral appearance and finish)	-
10 (Marking)	-
6.2 (Impermeability test according to the Method 1 described in IS 5913 : 1989)	-
Cl. 5.2 (Cl. 5.2 Outer Thickness)	-
Cl. 5.2 (Cl. 5.2 Inner Thickness)	-
Cl. 5.2 (Cl. 5.2, Outer Length)	-
Cl. 5.2 (Cl. 5.2, Inner Length )	-

-
Qty. required One Pair (One Inner & One Outer)

IS 1328 (1996)

Veneered Decorative Plywood -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Grade - For BWR)	-
4.1 (Grade - For MR)	-
4.2 (Type - For Type 1)	-
4.2 (Type - For Type 2)	-
7.1.1 (Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-
7.2.1 (Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-
7.1.2 (Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-
7.2.2 (Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-
7.1.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-
7.2.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-
8 (Dimensions & Tolerances - Length - Cl. 8)	-
8 (Dimensions & Tolerances - Width - Cl. 8)	-
8 (Dimensions & Tolerances - Thickness - Cl. 8)	-
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-
8 (Dimensions & Tolerances - Squareness - Annexure C)	-
9 (Finish - Cl. 9.1, 8.3)	-
9 (Finish - Cl. 9.2, 8.3)	-
11 (Tests - Moisture Content - Part 1 of IS 1734)	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-

-
Qty. required 1 Nos

Bureau of Indian Standards

The National Standards Body of India

BIS, Guwahati Branch Laboratory (GBL)

2nd Floor, West End Block, Housefed Building Complex, Last Gate, Dispur, Guwahati, Assam 781006, GUWAHATI, Kamrup, Assam, 781006

9641193329 gbol@bis.gov.in

Scope List