BIS - LIMS (Laboratory Information Management System)

ABSOLUTE TESTING SERVICES, FARIDABAD

FCA-3659, SGM NAGAR NIT-3, FARIDABAD, HARYANA-121001, Faridabad, Faridabad, Haryana, 121001

9310265510 cs@a-ts.in

Scope List

Reset

15 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

Toasters, Grills, Roasters and Similar Appliances

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Classification- IS 302-1)	-	2000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	2000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	2000	-
Cl. 7(Verification)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
8(Protection against access to live parts)	-	2000	-
Cl.8(Verification)	-	2000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
10(Power Input & Current)	-	2000	-
Cl.10(Verification)	-	2000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
Cl. 11 IS 302-2-9(Heating)	-	2000	-
11(Temperature Rise/ Heating)	-	2000	-
11.101(Heating)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	2000	-
11.101(Heating)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
Cl.13(Verification)	-	2000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	2000	-
Cl.14(Verification)	-	2000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
14(Transient Over Voltage)	-	2000	-
14(Transient Over Voltage)	-	2000	-
Cl.15.1(Moisture Resistance)	-	2000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	2000	-
15.1(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.1(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15(Moisture Resistance)	-	2000	-
15(Moisture Resistance)	-	2000	-
Cl. 16(Verification)	-	2000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
16(Leakage Current and Electric Strength)	-	2000	-
16(Leakage Current and Electric Strength)	-	2000	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
Cl.19(Verification)	-	2000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.104(ABNORMAL OPERATION)	-	2000	-
19.104(ABNORMAL OPERATION)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
19(Abnormal Operation)	-	2000	-
19(Abnormal Operation)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	2000	-
19.11.4.2(Radiated fields)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
Cl.20(Verification)	-	2000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
Cl.21(Verification)	-	2000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.101(MECHANICAL STRENGTH)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
21(Mechanical strength)	-	2000	-
21(Mechanical strength)	-	2000	-
Cl.22(Verification)	-	2000	-
Cl. 22 IS 302-2-9(Construction )	-	2000	-
22.111(Constructions)	-	2000	-
22.111(Constructions)	-	2000	-
22.11o(Constructions)	-	2000	-
22.109(Constructions)	-	2000	-
22.108(Constructions)	-	2000	-
22.101 to 22.107(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
22.111(Constructions)	-	2000	-
22.111(Constructions)	-	2000	-
22.11o(Constructions)	-	2000	-
22.109(Constructions)	-	2000	-
22.108(Constructions)	-	2000	-
22.101 to 22.107(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
22(Construction)	-	2000	-
22(Construction)	-	2000	-
22(Construction, IS 302-1)	-	2000	-
Cl.23(Verification)	-	2000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
23(Internal wiring)	-	2000	-
23(Internal wiring)	-	2000	-
Cl.24(Verification)	-	2000	-
Cl. 24 IS 302-2-9(Components)	-	2000	-
24.101(Components)	-	2000	-
24.101(Components)	-	2000	-
24.2 to 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
24.101(Components)	-	2000	-
24.101(Components)	-	2000	-
24.2 to 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
24(Components)	-	2000	-
24(Components)	-	2000	-
Cl.25(Verification)	-	2000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
25.1(Supply connection and external flexible cords, IS 302-2-9)	-	2000	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-2-9)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
Cl.26(Verification)	-	2000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
Cl.27(Verification)	-	2000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
27(Provision For Earthing)	-	2000	-
27(Provision For Earthing)	-	2000	-
Cl.28(Verification)	-	2000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
28(Screws & Connections)	-	2000	-
28(Screws & Connections)	-	2000	-
CL.29(Verification)	-	2000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
Cl.30(Verification)	-	2000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
Cl.31(Verification)	-	2000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	2000	-
31(Resistance to rusting)	-	2000	-
31(Resistance to rusting)	-	2000	-
31(Resistance to rusting)	-	2000	-
31(Resistance to rusting)	-	2000	-
31(Resistance to Rusting)	-	2000	-
31(Resistance to Rusting)	-	2000	-
Cl.32(Verification)	-	2000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
32(Radiation ,Toxicity and similar hazards)	-	20002000	-
32(Radiation ,Toxicity and similar hazards)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking, IS 302-2-9)	-	2000	-
7.3(Marking- IS 302-1)	-	2000	-
7.4(Marking- IS 302-1)	-	2000	-
7.5(Marking- IS 302-1)	-	2000	-
7.5(Marking- IS 302-1)	-	2000	-
7.6(Marking- IS 302-1)	-	2000	-
7.7(Marking- IS 302-1)	-	2000	-
7.8(Marking- IS 302-1)	-	2000	-
7.9(Marking- IS 302-1)	-	2000	-
7.1O(Marking- IS 302-1)	-	2000	-
7.11(Marking- IS 302-1)	-	2000	-
7.12(Marking- IS 302-2-9)	-	2000	-
7.14(Marking- IS 302-1)	-	2000	-
7.13(Marking- IS 302-1)	-	2000	-
7.14(Marking- IS 302-2-9)	-	2000	-
7.15(Marking- IS 302-1)	-	2000	-
8(Protection Against Access To live parts)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	2000	-
11(Heating, IS 302-1, Table -3)	-	2000	-
11(Heating, IS 302-1)	-	2000	-
11.101(Heating, IS 302-2-9)	-	2000	-
13.2(Leakage Current And Electrical Strength At Operating Temperature)	-	2000	-
13.3(Leakage Current And Electrical Strength At Operating Temperature)	-	2000	-
14(Trasient Overvoltage)	-	2000	-
15.1(Moisture Resistance)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
Cl. 18 IS 302-2-9(Endurance)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
11(Temperature Rise/ Heating)	-	2000	-
10(Power Input & Current)	-	2000	-
7.101(Marking- IS 302-2-9)	-	2000	-
15.101(Moisture Resistance)	-	2000	-
16.2(Leakage Current And Electrical Strength At Operating Temperature)	-	2000	-
16.3(Leakage Current And Electrical Strength At Operating Temperature)	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19.2(Abnormal Operation, IS 302-1)	-	2000	-
19.3(Abnormal Operation, IS 302-1)	-	2000	-
19.5(Abnormal Operation, IS 302-1)	-	2000	-
19.6(Abnormal Operation, IS 302-1)	-	2000	-
19.7(Abnormal Operation, IS 302-1)	-	2000	-
19.9(Abnormal Operation, IS 302-1)	-	2000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	2000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	2000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
19.101(Abnormal Operation , IS 302-2-9)	-	2000	-
19.102(Abnormal Operation , IS 302-2-9)	-	2000	-
19.103(Abnormal Operation , IS 302-2-9)	-	2000	-
19.104(Abnormal Operation , IS 302-2-9)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.101(Stability & Mechanical Hazards, IS 302-2-9)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
21.101(Mechanical Strength, IS 302-2-9)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	2000	-
24(Component, IS 302-2-9)	-	2000	-
24.101(Component, IS 302-2-9)	-	2000	-
24.102(Component, IS 302-2-9)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
23.4(Internal Wiring, IS 302-1)	-	2000	-
23.6(Internal Wiring, IS 302-1)	-	2000	-
23.7(Internal Wiring, IS 302-1)	-	2000	-
23.8(Internal Wiring, IS 302-1)	-	2000	-
23.10(Internal Wiring, IS 302-1)	-	2000	-
19.4(Abnormal Operation, IS 302-1)	-	2000	-
22.101(Construction, IS 302-2-9)	-	2000	-
22.102(Construction, IS 302-2-9)	-	2000	-
22.103(Construction, IS 302-2-9)	-	2000	-
22.104(Construction, IS 302-2-9)	-	2000	-
22.105(Construction, IS 302-2-9)	-	2000	-
22.106(Construction, IS 302-2-9)	-	2000	-
22.107(Construction, IS 302-2-9)	-	2000	-
22.108(Construction, IS 302-2-9)	-	2000	-
22.109(Construction, IS 302-2-9)	-	2000	-
22.110(Construction, IS 302-2-9)	-	2000	-
22.111(Construction, IS 302-2-9)	-	2000	-
22.112(Construction, IS 302-2-9)	-	2000	-
Cl.11(Verification)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
23.9(Internal Wiring, IS 302-1)	-	2000	-
8(Protection against access to live parts)	-	2000	-

13 Nov, 2026

-
"1 19.11.4.1 (Electrostatic discharges) Electrostatic discharge Lab will create the test facility with in 6 month 2 19.11.4.2 (Radiated fields) Radiated fields lab will create test facility with in 6 month 3 19.11.4.3 (Fast transient bursts) Fast Transient bursts lab will create test facility with in 6 month 4 19.11.4.4 (Surge immunity test) surge immunity test lab will create test facility with in 6 month 5 19.11.4.5 (Immunity to conducted discharges) immunity to conducted discharges lab will create test facility with in 6 month 6 19.11.4.6 (Class 3 Voltage dips and interruptions) Voltage dips lab will create test facility with in 6 month"

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

Commercial Dispensing Appliances and Vending Machines

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
15.1(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	2000	-
19.11.4.2(Radiated fields)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
22.1(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.101 to 22.114(Constructions)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.101 to 23.102(Internal wiring)	-	2000	-
24.1(Components)	-	2000	-
24.2 to 24.6(Components)	-	2000	-
24.101 to 24.103(Components)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.6(Provision for earthing)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
23.101 to 23.102(Internal wiring)	-	2000	-
22.11(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
15.102(Moisture resistance)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.101 to 24.103(Components)	-	2000	-
24.2 to 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
22.101 to 22.114(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.1(Moisture resistance)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
22.11(Constructions)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
15.1(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	2000	-
19.11.4.2(Radiated fields)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
22.1(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.101 to 22.114(Constructions)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.101 to 23.102(Internal wiring)	-	2000	-
24.1(Components)	-	2000	-
24.2 to 24.6(Components)	-	2000	-
24.101 to 24.103(Components)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.6(Provision for earthing)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
23.101 to 23.102(Internal wiring)	-	2000	-
22.11(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
15.102(Moisture resistance)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
32(Radiation, toxicity and similar hazards)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.101 to 24.103(Components)	-	2000	-
24.2 to 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
22.101 to 22.114(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.1(Moisture resistance)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
22.11(Constructions)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-

13 Nov, 2026

-
Included w.e.f. 12.11.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Domestic Electrical Appliances

45600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for the tests)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	2000	-
22.2(Construction, IS 302-1)	-	2000	-
22.3(Construction, IS 302-1)	-	2000	-
B.22.4(Construction, IS 302-1)	-	2000	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	2000	-
22.11(Construction, IS 302-1)	-	2000	-
22.16(Construction)	-	2000	-
22.32(Construction, IS 302-1)	-	2000	-
22.42(Construction)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
24(Components)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
28(Screw test and connections)	-	2000	-
28.1(Screws and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
31(Resistance to Rusting)	-	2000	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.2(Radiated fields)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	2000	-
4(General requirement)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
A.2(Earth continuity test)	-	2000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
B.22.5(Construction, IS 302-1)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
19(Abnormal Operation)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-

13 Nov, 2026

-
Included w.e.f 15.10.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	1000	-
5.2(Message Readability)	-	1000	-
6(Marking)	-	1000	-

13 Nov, 2026

-
-

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	5000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	5000	-
7.3.2("Discharge Performance at -20°C ")	-	5000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	5000	-
7.4(Charge (capacity) Retention and Recovery)	-	5000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	5000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	5000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	5000	-
7.7(Battery Internal Resistance)	-	5000	-
7.8(Electrostatic Discharge (ESD))	-	5000	-

13 Nov, 2026

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	4500	-
6(Hazardous radiations)	-	4500	-
7(Heating under normal operating conditions)	-	4500	-
8(Constructional requirements with regard to the protection against electric shock)	-	4500	-
9(Electric shock hazard under normal operating conditions)	-	4500	-
10(Insulation requirements)	-	4500	-
11(Fault conditions)	-	4500	-
12(Mechanical strength)	-	4500	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	4500	-
14(Components)	-	4500	-
15(TERMINALS)	-	4500	-
16(External flexible cords)	-	4500	-
17(Electrical connections and mechanical fixings)	-	4500	-
19(Stability and mechanical hazards)	-	4500	-
20(Resistance to fire)	-	4500	-
6.1(Ionizing radiation)	-	4500	-
6.2(Laser Radiation)	-	4500	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	4500	-
16.3b(Cord Bending Test)	-	4500	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	4500	-
6.3()	-	4500	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	4500	-

13 Nov, 2026

-
Exclusion: Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Cl. 14 (Components)

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	2000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	2000	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	2000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	2000	-
20(Resistance to corrosion)	-	2000	-

13 Nov, 2026

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	2000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	2000	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distance and clearances)	-	2000	-
15(Selection of lamps for tests (Sampling))	-	2000	-
16(Condition of compliance)	-	2000	-
17(Tests)	-	2000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	2000	-
Annex B(Lamps with operating position limitations)	-	2000	-

13 Nov, 2026

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2500	-
5(General Safety Considerations)	-	2500	-
5.1(General)	-	2500	-
5.2(Insulation and Wiring)	-	2500	-
5.3(Venting)	-	2500	-
5.4(Temperature, Voltage and Current Management)	-	2500	-
5.5(Terminal Contacts)	-	2500	-
5.6(Assembly of Cells into batteries)	-	2500	-
5.7(Quality Plan)	-	2500	-
5.8(Battery Safety Components)	-	2500	-
6(Type Test and Sample Size)	-	2500	-
7(Specific requirements and tests)	-	2500	-
7.1(Charging procedure for test purposes)	-	2500	-
7.2(Intended Use)	-	2500	-
7.3(Reasonably foreseeable misuse)	-	2500	-
8(Information for safety)	-	2500	-
8.1(General)	-	2500	-
8.2(Small Cell and battery safety information)	-	2500	-
9(Marking)	-	2500	-
9.1(Cell Marking)	-	2500	-
9.2(Battery Marking)	-	2500	-
9.3(Caution for ingestion of small cells and batteries)	-	2500	-
9.4(Other information)	-	2500	-
10(Packaging)	-	2500	-

13 Nov, 2026

-
-

IS 16046 : Part 1 (2018)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	4500	-
5(General Safety Considerations)	-	4500	-
5.1(General)	-	4500	-
5.2(Insulation and Wiring)	-	4500	-
5.3(Venting)	-	4500	-
5.5(Terminal Contacts)	-	4500	-
5.6(Assembly of Cells into batteries)	-	4500	-
5.7(Quality Plan)	-	4500	-
6(Tyoe Test amd Sample Size)	-	4500	-
7(Specific requirements and tests)	-	4500	-
7.1(Charging procedure for test purposes)	-	4500	-
7.2(Intended Use)	-	3500	-
7.3(Reasonably foreseeable misuse)	-	3500	-
8(Information for safety)	-	3500	-
8.1(General)	-	3500	-
8.2(Small Cell and battery safety information)	-	3500	-
9(Marking)	-	2000	-
9.1(Cell Marking)	-	2000	-
9.2(Battery Marking)	-	2000	-
9.3(Caution for ingestion of small cells and batteries)	-	3500	-
9.4(Other information)	-	2800	-
10(Packaging)	-	3500	-
5.4(Temperature, Voltage and Current Management)	-	4000	-

13 Nov, 2026

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

19200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	3500	-
7(Marking and instructions)	-	3500	-
8(Protection against live parts)	-	3500	-
10(POWER INPUT AND CURRENT)	-	3500	-
11(HEATING)	-	3500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3500	-
14(TRANSIENT OVERVOLTAGES)	-	3500	-
15(MOISTURE RESISTANCE)	-	3500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3500	-
19(ABNORMAL OPERATION)	-	3500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3500	-
21(MECHANICAL STRENGTH)	-	3500	-
22(CONSTRUCTION)	-	3500	-
23(INTERNAL WIRING)	-	3500	-
24(COMPONENTS)	-	3500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3500	-
27(PROVISION FOR EARTHING)	-	3500	-
28(SCREWS AND CONNECTIONS)	-	3500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3500	-
30(RESISTANCE TO HEAT AND FIRE)	-	3500	-
31(RESISTANCE TO RUSTING)	-	3500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-

13 Nov, 2026

-
-

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

18125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	3500	-
6(Classification- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.3(Marking- IS 302-1)	-	3500	-
7.4(Marking- IS 302-1)	-	3500	-
7.6(Marking- IS 302-1)	-	3500	-
7.7(Marking- IS 302-1)	-	3500	-
7.8(Marking- IS 302-1)	-	3500	-
7.11(Marking- IS 302-1)	-	3500	-
7.12(Marking- IS 302-1)	-	3500	-
7.13(Marking- IS 302-1)	-	3500	-
7.14(Marking- IS 302-1)	-	3500	-
7.15(Marking- IS 302-1)	-	3500	-
7.101(Marking)	-	3500	-
8( Protection Against Electric Shock, IS 302-1)	-	3500	-
10(Power Input and Current, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3500	-
14(Transient Over Voltages, IS 302-1)	-	3500	-
15.1(Moisture Resistance, IS 302-1)	-	3500	-
15.2(Moisture Resistance, IS 302-1)	-	3500	-
15(Moisture Resistance, IS 302-1)	-	3500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3500	-
19.7(Abnormal Operation, IS 302-1)	-	3500	-
19.8(Abnormal Operation, IS 302-1)	-	3500	-
19.9(Abnormal Operation, IS 302-1)	-	3500	-
19.1(Abnormal Operation, IS 302-1)	-	3500	-
19.101(Abnormal Operation)	-	3500	-
19.102(Abnormal Operation)	-	3500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.101(Stability & Mechanical Hazards)	-	3500	-
20.102(Stability & Mechanical Hazards)	-	3500	-
20.103(Stability & Mechanical Hazards)	-	3500	-
20.104(Stability & Mechanical Hazards)	-	3500	-
20.105(Stability & Mechanical Hazards)	-	3500	-
20.106(Stability & Mechanical Hazards)	-	3500	-
20.107(Stability & Mechanical Hazards)	-	3500	-
20.108(Stability & Mechanical Hazards)	-	3500	-
20.109(Stability & Mechanical Hazards)	-	3500	-
20.110(Stability & Mechanical Hazards)	-	3500	-
20.111(Stability & Mechanical Hazards)	-	3500	-
20.112(Stability & Mechanical Hazards)	-	3500	-
20.113(Stability & Mechanical Hazards)	-	3500	-
20.114(Stability & Mechanical Hazards)	-	3500	-
20.115(Stability & Mechanical Hazards)	-	3500	-
20.116(Stability & Mechanical Hazards)	-	3500	-
21.1(Mechanical Strength, IS 302-1)	-	3500	-
21.2(Mechanical Strength, IS 302-1)	-	3500	-
22(Construction, IS 302-1)	-	3500	-
22.101(Construction)	-	3500	-
22.102(Construction)	-	3500	-
23.1(Internal Wiring, IS 302-1)	-	3500	-
23.2(Internal Wiring, IS 302-1)	-	3500	-
23.3(Internal Wiring, IS 302-1)	-	3500	-
23.4(Internal Wiring, IS 302-1)	-	3500	-
23.5(Internal Wiring, IS 302-1)	-	3500	-
23.6(Internal Wiring, IS 302-1)	-	3500	-
23.7(Internal Wiring, IS 302-1)	-	3500	-
23.8(Internal Wiring, IS 302-1)	-	3500	-
23.9(Internal Wiring, IS 302-1)	-	3500	-
23.10(Internal Wiring, IS 302-1)	-	3500	-
24.1(Components, IS 302-1)	-	3500	-
24.2(Components, IS 302-1)	-	3500	-
24.5(Components, IS 302-1)	-	3500	-
24.6(Components, IS 302-1)	-	3500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26(Terminals for External Conductors, IS 302-1)	-	3500	-
27(Provision for Earthing, IS 302-1)	-	3500	-
27.2(Provision for Earthing, IS 302-1)	-	3500	-
27.3(Provision for Earthing, IS 302-1)	-	3500	-
27.4(Provision for Earthing, IS 302-1)	-	3500	-
27.5(Provision for Earthing, IS 302-1)	-	3500	-
28(Screws & Connections, IS 302-1)	-	3500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3500	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3500	-
31(Resistance of Rusting, IS 302-1)	-	3500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	3500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2500	-

13 Nov, 2026

-
Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics)

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

23100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	3500	-
7.0(Marking and instructions)	-	3500	-
8.0(Protection against access to live part test)	-	3500	-
10.0(Power Input and current test)	-	3500	-
11.0(Heating test)	-	3500	-
13.0(Leakage current and electric strength test)	-	3500	-
14.0(Transient voltages)	-	3500	-
15.0(Moisture Resistance)	-	3500	-
16.0(Leakage current and electric strength test)	-	3500	-
19.0(Abnormal Operations)	-	3500	-
20.0(Stability and Mechanical Hazards)	-	3500	-
21.0(Mechanical Strength)	-	3500	-
22.0(Construction verification related tests)	-	3500	-
23.0(Internal wiring)	-	3500	-
24.0(Components)	-	3500	-
25.0(Supply connections and External Flexible Cords)	-	3500	-
26.0(Terminal for External Conductors)	-	3500	-
27.0(Provision for Earthing)	-	3500	-
28.0(Screws and connections)	-	3500	-
29.0(Clearances and Creepage distances and solid insulation)	-	3500	-
30.0(Resistance to heat and fire)	-	3500	-
31.0(Resistance to rusting)	-	3500	-
32.0(Radiation, Toxicity and Similar hazards)	-	3500	-
4(General Requirements)	-	3500	-
5(General condition for the tests)	-	3500	-

13 Nov, 2026

-
Exclusion: Cl. 32.0 (Radiation, Toxicity and Similar hazards), Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), CL. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics)

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	5500	-
1.6(Power interface .)	-	5500	-
1.7(Markings and instructions)	-	5500	-
2.1(Protection from electric shock and energy hazards)	-	5500	-
2.2(SELV circuits)	-	5500	-
2.3(TNV circuits)	-	5500	-
2.4(Limited current circuits)	-	5500	-
2.5(Limited power sources .)	-	5500	-
2.6(Provisions for earthing and bonding)	-	5500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	5500	-
2.8(Safety interlocks)	-	5500	-
2.9(Electrical insulation)	-	5500	-
2.10(Clearances, creepage distances and distances through insulation)	-	5500	-
3.1(General)	-	5500	-
3.2(Connection to a mains supply)	-	5500	-
3.3(Wiring terminals for connection of external conductors)	-	5500	-
3.4(Disconnection from the mains supply)	-	5500	-
3.5(Interconnection of equipment)	-	5500	-
4.1(Stability)	-	5500	-
4.2(Mechanical strength)	-	5500	-
4.3(Design and construction)	-	5500	-
4.4(Protection against hazardous moving parts)	-	5500	-
4.5(Thermal requirements)	-	5500	-
4.6(Openings in enclosures)	-	5500	-
4.7(Resistance to fire)	-	5500	-
5.1(Touch current and protective conductor curren)	-	5500	-
5.2(Electric strength)	-	5500	-
5.3(Abnormal operating and fault conditions)	-	5500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	5500	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	5500	-
6.3(Protection of the telecommunication wiring system from overheating)	-	5500	-
7.1(General)	-	5500	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	5500	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5500	-
7.4(Insulation between primary circuits and cable distribution systems)	-	5500	-
1.5(Components)	-	5500	-
2.8.2/2.8.5(Interlock switches)	-	5500	-
2.8.7(Switches and Relay)	-	5500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	5500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	5500	-
2.10.5.4(Opto-coupler)	-	5500	-
2.10.5.6(Thin sheet materials)	-	5500	-
2.10.5.11(SMPS Transformer and Inductor)	-	5500	-
2.10.5.12(Wires in wound components)	-	5500	-
2.10.5.13(Winding wire)	-	5500	-
2.10.5.14(Additional insulation in wound components)	-	5500	-
2.10.6(PCB material)	-	5500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	5500	-
2.10.8.4(Abrasion resistance test)	-	5500	-
2.10.9(Thermal Cycling)	-	5500	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	5500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	5500	-
2.10.12(Enclosed and sealed parts)	-	5500	-
3.1.4(Internal wire)	-	5500	-
3.2.4(Appliance inlet /connector)	-	5500	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	5500	-
4.2.8(Cathode Ray Tubes)	-	5500	-
4.3.8(Batteries)	-	5500	-
4.3.10(Dust, powders, liquids and gases)	-	5500	-
4.3.11(Containers for liquids or gases)	-	5500	-
4.3.12(Flammable liquids)	-	5500	-
4.3.13.2(Ionizing radiation)	-	5500	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	5500	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	5500	-
4.3.13.5(LED, laser class)	-	5500	-
Annex A3(Hot flaming oil test)	-	5500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	5500	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	5500	-
Annex K(Thermal Control)	-	5500	-
Annex Q(Voltage Dependent Resistors)	-	5500	-
Annex B(Motor tests under abnormal conditions)	-	5500	-
Annex C(Transformers)	-	5500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	5500	-
Annex EE(Household and home/ office document/ media shredders)	-	5500	-

13 Nov, 2026

-
Exclusion: Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Cl. 1.5 (Components), Cl. 4.3.11 (Containers for liquids or gases), Cl. 4.2.8 (Cathode Ray Tubes)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	3500	-
8.1.1(Protection against live parts in all positions)	-	3500	-
8.1.2(Protection against live parts in openings)	-	3500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	3500	-
8.1.4(Protection against live parts against protective impedance)	-	3500	-
10.1(Power input)	-	3500	-
10.2(Current input)	-	3500	-
11.1(General)	-	3500	-
11.2(General)	-	3500	-
11.3(Heating)	-	3500	-
13.1(General)	-	3500	-
13.2(Leakage current at operating temperature)	-	3500	-
13.3(Electric Strength at operating temperature)	-	3500	-
14(Transient Over Voltages)	-	3500	-
15.0(General)	-	3500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	3500	-
15.2(Spillage Test)	-	3500	-
15.3(Humidity Test)	-	3500	-
16.0(General)	-	3500	-
16.1(General)	-	3500	-
16.2(Leakage Current (after Clause 15))	-	3500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	3500	-
19(Abnormal Operation)	-	3500	-
20(Stability test)	-	3500	-
21(Mechanical Strength Test)	-	3500	-
22(Construction verification related test)	-	3500	-
23(General)	-	3500	-
24(Components)	-	3500	-
25(Supply connection and external flexible cords)	-	3500	-
26(Terminals for external conductors)	-	3500	-
27(Provision for earthing)	-	3500	-
28(Screw test and connections)	-	3500	-
29(clearance, creepage distances and solid insulation)	-	3500	-
30.1(Ball pressure test)	-	3500	-
30.2(Glow Wire Test)	-	3500	-
30.2(Needle Flame Test)	-	3500	-
31(Resistance to Rusting)	-	3500	-
32(Radiation Toxicity and Similar Hazards)	-	3500	-
4(General requirement)	-	3500	-
16(Leakage current and electric strength)	-	3500	-
8.1.5(Live parts of built-in appliances)	-	3500	-
11.4(Heating appliances)	-	3500	-
11.5(Motor-operated appliances)	-	3500	-
11.6(Combined appliances)	-	3500	-
11.7(Duration corresponding)	-	3500	-
5(General conditions for tests)	-	3500	-
6(Classification- IS 302-1)	-	3500	-
11.8(Temperature rise)	-	3500	-
17(Over Load Protection of Transformers and associated circuits)	-	3500	-

13 Nov, 2026

-
"(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

Bureau of Indian Standards

The National Standards Body of India

ABSOLUTE TESTING SERVICES, FARIDABAD

FCA-3659, SGM NAGAR NIT-3, FARIDABAD, HARYANA-121001, Faridabad, Faridabad, Haryana, 121001

9310265510 cs@a-ts.in

Scope List