BIS - LIMS (Laboratory Information Management System)

Classic Instrumentation Pvt. Ltd. (8135126), Noida

C-45, SECTOR-65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9810285868 info@classiclabindia.com

Scope List

Reset

21 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	8000	-
Cl-4.2(Energy source classifications)	-	8000	-
Cl-4.3(Protection against energy sources)	-	8000	-
Cl-4.4(Safeguards)	-	8000	-
Cl-4.5(Explosion)	-	8000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	8000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	8000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	8000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	8000	-
Cl-4.10(Components requirements)	-	8000	-
Cl-5.1(General- Electrically-caused injury)	-	8000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	8000	-
Cl-5.3(Protection against electrical energy sources)	-	8000	-
Cl-5.4(Insulation materials and requirements)	-	8000	-
Cl-5.5(Components as safeguards)	-	8000	-
Cl-5.6(Protective conductor)	-	8000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	8000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	8000	-
Cl-6.1(General- Electrically-caused fire)	-	8000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	8000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	8000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	8000	-
Cl-6.5(Internal and external wiring)	-	8000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	8000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	8000	-
Cl-7.3(Ozone exposure)	-	8000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	8000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	8000	-
Cl-8.1(General- Mechanically-caused injury)	-	8000	-
Cl-8.2(Mechanical energy source classifications)	-	8000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	8000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	8000	-
Cl-8.5(Safeguards against moving parts)	-	8000	-
Cl-8.6(Stability of equipment)	-	8000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	8000	-
Cl-8.8(Handle strength)	-	8000	-
Cl-8.9(Wheels or casters attachment requirements)	-	8000	-
Cl-8.10(Carts, stands, and similar carriers)	-	8000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	8000	-
Cl-9.1(General-Thermal burn injury)	-	8000	-
Cl-9.2(Thermal energy source classifications)	-	8000	-
Cl-9.3(Touch temperature limits)	-	8000	-
Cl-9.4(Safeguards against thermal energy sources)	-	8000	-
Cl-9.5(Requirements for safeguards)	-	8000	-
Cl-9.6(Requirements for wireless power transmitters)	-	8000	-
Cl-10.1(General-Radiation)	-	8000	-
Cl-10.2(Radiation energy source classifications)	-	8000	-
Cl-10.3(Safeguards against laser radiation)	-	8000	-
Annex A(Examples of equipment within the scope of this document)	-	8000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	8000	-
Annex B-2(Normal operating conditions)	-	8000	-
Annex B-3(Simulated abnormal operating conditions)	-	8000	-
Annex B-4(Simulated single fault conditions)	-	8000	-
Annex D-1(Impulse test generators)	-	8000	-
Annex D-2(Antenna interface test generator)	-	8000	-
Annex D-3(Electronic pulse generator)	-	8000	-
Annex E-1(Electrical energy source classification for audio signals)	-	8000	-
Annex E-2(Audio signals used during test)	-	8000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	8000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	8000	-
Annex F-2(Letter symbols and graphical symbols)	-	8000	-
Annex F-3(Equipment markings)	-	8000	-
Annex F-4(Instructions)	-	8000	-
Annex F-5(Instructional safeguards)	-	8000	-
Annex G-1(Switches)	-	8000	-
Annex G-2(Relays)	-	8000	-
Annex G-3(Protective devices)	-	8000	-
Annex G-4(Connectors)	-	8000	-
Annex G-5(Wound components)	-	8000	-
Annex G-6(Wire insulation)	-	8000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	8000	-
Annex G-8(Varistors)	-	8000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	8000	-
Annex G-10(Resistors)	-	8000	-
Annex G-11(Capacitors and RC units)	-	8000	-
Annex G-12(Optocouplers)	-	8000	-
Annex G-13(Printed boards)	-	8000	-
Annex G-14(Coatings on component terminals)	-	8000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	8000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	8000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	8000	-
Annex H-2(Method A)	-	8000	-
Annex H-3(Method B)	-	8000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	8000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	8000	-
Annex J-2(Type tests)	-	8000	-
Annex J-3(Testing during manufacturing)	-	8000	-
Annex K-1(General- Safety interlocks)	-	8000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	8000	-
Annex K-3(Inadvertent change of operating mode)	-	8000	-
Annex K-4(Interlock safeguard override)	-	8000	-
Annex K-5(Fail-safe)	-	8000	-
Annex K-6(Mechanically operated safety interlocks)	-	8000	-
Annex K-7(Interlock circuit isolation)	-	8000	-
Annex L-1(General requirements)	-	8000	-
Annex L-2(Permanently connected equipment)	-	8000	-
Annex L-3()	-	8000	-
Annex L-4(Single-phase equipment)	-	8000	-
Annex L-5(Three-phase equipment)	-	8000	-
Annex L-6(Switches as disconnect devices)	-	8000	-
Annex L-7(Plugs as disconnect devices)	-	8000	-
Annex L-8(Multiple power sources)	-	8000	-
Annex L-9(Compliance criteria)	-	8000	-
Annex M-1(General requirements)	-	8000	-
Annex M-2(Safety of batteries and their cells)	-	8000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	8000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	8000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	8000	-
Annex M-6(Safeguards against short-circuits)	-	8000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	8000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	8000	-
Annex M-9(Preventing electrolyte spillage)	-	8000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	8000	-
Annex N(Electrochemical potentials (V))	-	8000	-
Annex O(Measurement of creepage distances and clearances)	-	8000	-
Annex P-1(General-Safeguards against conductive objects)	-	8000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	8000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	8000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	8000	-
Annex Q-1(Limited power source)	-	8000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	8000	-
Annex R(Limited short-circuit test)	-	8000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	8000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	8000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	8000	-
Annex S-4(Flammability classification of materials)	-	8000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	8000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	8000	-
Annex T-1(General-Mechanical strength tests)	-	8000	-
Annex T-2(Steady force test, 10 N)	-	8000	-
Annex T-3(Steady force test, 30 N)	-	8000	-
Annex T-4(Steady force test, 100 N)	-	8000	-
Annex T-5(Steady force test, 250 N)	-	8000	-
Annex T-6(Enclosure impact test)	-	8000	-
Annex T-7(Drop test)	-	8000	-
Annex T-8(Stress relief test)	-	8000	-
Annex T-9(Glass impact test)	-	8000	-
Annex T-10(Glass fragmentation test)	-	8000	-
Annex T-11(Test for telescoping or rod antennas)	-	8000	-
Annex V-1(Accessible parts of equipment)	-	8000	-
Annex V-2(Accessible part criterion)	-	8000	-
Annex W(Comparison of terms introduced in this document)	-	8000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	8000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	8000	-
Annex Y-2(Resistance to UV radiation)	-	8000	-
Annex Y-3(Resistance to corrosion)	-	8000	-
Annex Y-4(Gaskets)	-	8000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	8000	-
Annex Y-6(Mechanical strength of enclosures)	-	8000	-
Cl-4.1(General- materials, components)	-	8000	-
Cl-4.2(Energy source classifications)	-	8000	-
Cl-4.3(Protection against energy sources)	-	8000	-
Cl-4.4(Safeguards)	-	8000	-
Cl-4.5(Explosion)	-	8000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	8000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	8000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	8000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	8000	-
Cl-4.10(Components requirements)	-	8000	-
Cl-5.1(General- Electrically-caused injury)	-	8000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	8000	-
Cl-5.3(Protection against electrical energy sources)	-	8000	-
Cl-5.4(Insulation materials and requirements)	-	8000	-
Cl-5.5(Components as safeguards)	-	8000	-
Cl-5.6(Protective conductor)	-	8000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	8000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	8000	-
Cl-6.1(General- Electrically-caused fire)	-	8000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	8000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	8000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	8000	-
Cl-6.5(Internal and external wiring)	-	8000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	8000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	8000	-
Cl-7.3(Ozone exposure)	-	8000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	8000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	8000	-
Cl-8.1(General- Mechanically-caused injury)	-	8000	-
Cl-8.2(Mechanical energy source classifications)	-	8000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	8000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	8000	-
Cl-8.5(Safeguards against moving parts)	-	8000	-
Cl-8.6(Stability of equipment)	-	8000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	8000	-
Cl-8.8(Handle strength)	-	8000	-
Cl-8.9(Wheels or casters attachment requirements)	-	8000	-
Cl-8.10(Carts, stands, and similar carriers)	-	8000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	8000	-
Cl-9.1(General-Thermal burn injury)	-	8000	-
Cl-9.2(Thermal energy source classifications)	-	8000	-
Cl-9.3(Touch temperature limits)	-	8000	-
Cl-9.4(Safeguards against thermal energy sources)	-	8000	-
Cl-9.5(Requirements for safeguards)	-	8000	-
Cl-9.6(Requirements for wireless power transmitters)	-	8000	-
Annex A(Examples of equipment within the scope of this document)	-	8000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	8000	-
Annex B-2(Normal operating conditions)	-	8000	-
Annex B-3(Simulated abnormal operating conditions)	-	8000	-
Annex B-4(Simulated single fault conditions)	-	8000	-
Annex D-1(Impulse test generators)	-	8000	-
Annex D-2(Antenna interface test generator)	-	8000	-
Annex D-3(Electronic pulse generator)	-	8000	-
Annex E-1(Electrical energy source classification for audio signals)	-	8000	-
Annex E-2(Audio signals used during test)	-	8000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	8000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	8000	-
Annex F-2(Letter symbols and graphical symbols)	-	8000	-
Annex F-3(Equipment markings)	-	8000	-
Annex F-4(Instructions)	-	8000	-
Annex F-5(Instructional safeguards)	-	8000	-
Annex G-1(Switches)	-	8000	-
Annex G-2(Relays)	-	8000	-
Annex G-3(Protective devices)	-	8000	-
Annex G-4(Connectors)	-	8000	-
Annex G-5(Wound components)	-	8000	-
Annex G-6(Wire insulation)	-	8000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	8000	-
Annex G-8(Varistors)	-	8000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	8000	-
Annex G-10(Resistors)	-	8000	-
Annex G-11(Capacitors and RC units)	-	8000	-
Annex G-12(Optocouplers)	-	8000	-
Annex G-13(Printed boards)	-	8000	-
Annex G-14(Coatings on component terminals)	-	8000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	8000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	8000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	8000	-
Annex H-2(Method A)	-	8000	-
Annex H-3(Method B)	-	8000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	8000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	8000	-
Annex J-2(Type tests)	-	8000	-
Annex J-3(Testing during manufacturing)	-	8000	-
Annex K-1(General- Safety interlocks)	-	8000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	8000	-
Annex K-3(Inadvertent change of operating mode)	-	8000	-
Annex K-4(Interlock safeguard override)	-	8000	-
Annex K-5(Fail-safe)	-	8000	-
Annex K-6(Mechanically operated safety interlocks)	-	8000	-
Annex K-7(Interlock circuit isolation)	-	8000	-
Annex L-1(General requirements)	-	8000	-
Annex L-2(Permanently connected equipment)	-	8000	-
Annex L-3()	-	8000	-
Annex L-4(Single-phase equipment)	-	8000	-
Annex L-5(Three-phase equipment)	-	8000	-
Annex L-6(Switches as disconnect devices)	-	8000	-
Annex L-7(Plugs as disconnect devices)	-	8000	-
Annex L-8(Multiple power sources)	-	8000	-
Annex L-9(Compliance criteria)	-	8000	-
Annex M-1(General requirements)	-	8000	-
Annex M-2(Safety of batteries and their cells)	-	8000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	8000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	8000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	8000	-
Annex M-6(Safeguards against short-circuits)	-	8000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	8000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	8000	-
Annex M-9(Preventing electrolyte spillage)	-	8000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	8000	-
Annex N(Electrochemical potentials (V))	-	8000	-
Annex O(Measurement of creepage distances and clearances)	-	8000	-
Annex P-1(General-Safeguards against conductive objects)	-	8000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	8000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	8000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	8000	-
Annex Q-1(Limited power source)	-	8000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	8000	-
Annex R(Limited short-circuit test)	-	8000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	8000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	8000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	8000	-
Annex S-4(Flammability classification of materials)	-	8000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	8000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	8000	-
Annex T-1(General-Mechanical strength tests)	-	8000	-
Annex T-2(Steady force test, 10 N)	-	8000	-
Annex T-3(Steady force test, 30 N)	-	8000	-
Annex T-4(Steady force test, 100 N)	-	8000	-
Annex T-5(Steady force test, 250 N)	-	8000	-
Annex T-6(Enclosure impact test)	-	8000	-
Annex T-7(Drop test)	-	8000	-
Annex T-8(Stress relief test)	-	8000	-
Annex T-9(Glass impact test)	-	8000	-
Annex T-10(Glass fragmentation test)	-	8000	-
Annex T-11(Test for telescoping or rod antennas)	-	8000	-
Annex V-1(Accessible parts of equipment)	-	8000	-
Annex V-2(Accessible part criterion)	-	8000	-
Annex W(Comparison of terms introduced in this document)	-	8000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	8000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	8000	-
Annex Y-2(Resistance to UV radiation)	-	8000	-
Annex Y-3(Resistance to corrosion)	-	8000	-
Annex Y-4(Gaskets)	-	8000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	8000	-
Annex Y-6(Mechanical strength of enclosures)	-	8000	-

23 Oct, 2028

-
Included w.e.f. 14.10.2025 Exclusion: "Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources)"

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Terminals)	-	30000	-
9(PROVISION FOR EARTHING)	-	3500	-
10(Protection against accidental contact with live parts)	-	3500	-
11(Mositure Resistance and Insulation)	-	4000	-
12(Electric Strength)	-	3000	-
13(Fault conditions)	-	3000	-
15(Construction)	-	3000	-
16(Creepage distance and clearances)	-	3000	-
17(Screws, current carrying parts and connections)	-	3000	-
18(Resistance to heat, fire and tracking)	-	3000	-
19(Resistance to corrosion)	-	3000	-
21(Heat management)	-	3000	-

23 Oct, 2028

-
Included w.e.f 16.07.2025

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	-
6(Classification)	-	5000	-
5(General conditions for the tests)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
11.8(Temperature rise)	-	5000	-
11.7(Duration corresponding)	-	5000	-
11.6(Combined appliances)	-	5000	-
11.5(Motor-operated appliances)	-	5000	-
11.4(Heating appliances)	-	5000	-
8.1.5(Live parts of built-in appliances)	-	5000	-
18(Endurance)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
16(Leakage current and electric strength)	-	5000	-
4(General requirement)	-	5000	-
32(Radiation Toxicity and Similar Hazards)	-	5000	-
31(Resistance to Rusting)	-	5000	-
30.2(Needle Flame Test)	-	5000	-
30.2(Glow Wire Test)	-	5000	-
30.1(Ball pressure test)	-	5000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
28(Screw test and connections)	-	5000	-
27(Provision for earthing)	-	5000	-
26(Terminals for external conductors)	-	5000	-
25(Supply connection and external flexible cords)	-	5000	-
24(Components)	-	5000	-
23(Internal wiring)	-	5000	-
22(Construction)	-	5000	-
21(Mechanical Strength)	-	5000	-
20(Stability and mechanical hazards)	-	5000	-
19(Abnormal Operation)	-	5000	-
18(Endurance)	-	5000	-
17(Over Load Protection of Transformers and associated circuits)	-	5000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	-
16.2(Leakage Current (after Clause 15))	-	5000	-
16.1(General)	-	5000	-
16.0(General)	-	5000	-
15.3(Humidity Test)	-	5000	-
15.2(Spillage Test)	-	5000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	-
15.0(Moisture resistance)	-	5000	-
14(Transient Over Voltages)	-	5000	-
13.3(Electric Strength at operating temperature)	-	5000	-
13.2(Leakage current at operating temperature)	-	5000	-
13(Leakage current and electric strength at operating temperature)	-	5000	-
11.3(Heating)	-	5000	-
11.2(General)	-	5000	-
11.1(General)	-	5000	-
10.2(Current input)	-	5000	-
10.1(Power input)	-	5000	-
9(Starting of motor operation test requirements and tests)	-	5000	-
8.1.4(Protection against live parts against protective impedance)	-	5000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	5000	-
8.1.2(Protection against live parts in openings)	-	5000	-
8.1.1(Protection against live parts in all positions)	-	5000	-
7(Marking and instructions)	-	5000	-
A.2(Earth continuity test)	-	5000	-
Annex C(Ageing test on motors)	-	5000	-
Annex D(Thermal motor protectors)	-	5000	-
15.2(Moisture resistance)	-	5000	-
19.17(Abnormal operation)	-	5000	-
20.1(Stability and mechanical hazards)	-	5000	-
21.2(Mechanical strength)	-	5000	-
21.3(Mechanical strength)	-	5000	-
22.5(Construction)	-	5000	-
22.6(Construction)	-	5000	-
22.11(Construction)	-	5000	-
22.16(Construction)	-	5000	-
22.32(Construction)	-	5000	-
22.42(Construction)	-	5000	-
23.3(Internal wiring)	-	5000	-
25(Supply connection and external flexible cords)	-	5000	-
25.7(Supply connection and external flexible cords)	-	5000	-
25.14(Supply connection and external flexible cords)	-	5000	-
25.15(Supply connection and external flexible cords)	-	5000	-
26.5(Terminals for external conductors)	-	5000	-
27.5(Provision for earthing)	-	5000	-
28.1(Screws and connections)	-	5000	-
B.22.1(Construction)	-	5000	-
B.22.3(Construction)	-	5000	-
B.22.4(Construction)	-	5000	-
B.22.5(Construction)	-	5000	-

23 Oct, 2028

-
Included w.e.f 13.05.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 18663 (2024)

Note Sorting Machines- Specifications

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1)(General Requirements)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.2 and subclauses of IS/IEC 62368-1)(Energy source classifications)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.3 and subclauses of IS/IEC 62368-1)(Protection against energy sources)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.4 and subclauses of IS/IEC 62368-1)(Safeguards)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.5 and subclauses of IS/IEC 62368-1)("Explosion- Requirements ")	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.6 and subclauses of IS/IEC 62368-1)(Fixing of conductors- Requirements)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.7 and subclauses of IS/IEC 62368-1)(Equipment for direct insertion into mains socket-outlets)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.8 and subclausesof IS/IEC 62368-1)(Equipment containing coin / button cell batteries)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.9 and subclauses of IS/IEC 62368-1)(Likelihood of fire or shock due to entry of conductive objects)	-	2500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.10 and subclauses of IS/IEC 62368-1)(Components requirements)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.2 and subclauses of IS/IEC 62368-1)(Classification and limits of electrical energy sources)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.3 and subclauses of IS/IEC 62368-1)(Protection against electrical energy sources)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1)(Insulation materials and requirements)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.5 and subclauses of IS/IEC 62368-1)(Components as safeguards)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.6 and subclauses of IS/IEC 62368-1)(Protective conductor)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.7 and subclauses of IS/IEC 62368-1)(Prospective touch voltage, touch current and protective conductor current.)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.8 and subclauses of IS/IEC 62368-1)(Backfeed safeguard in battery backed up supplies)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.1 of IS/IEC 62368-1)(Electrically-caused fire)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.2 and subclauses of IS/IEC 62368-1)(Classification of power sources (PS) and potential ignition sources (PIS).)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.3 and subclauses of IS/IEC 62368-1)(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.4 and subclauses of IS/IEC 62368-1)(Safeguards against fire under single fault conditions)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.5 and subclauses of IS/IEC 62368-1)(Internal and external wiring)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.6 and subclauses of IS/IEC 62368-1)(Safeguards against fire due to the connection of additional equipment)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 7, 7.1 to 7.6 and subclauses of IS/IEC 62368-1)(Injury caused by hazardous substances)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 8, 8.1 to 8.12 and subclauses of IS/IEC 62368-1)(Mechanically-caused injury)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 9, 9.1 to 9.6 and subclauses of IS/IEC 62368-1)(Thermal burn injury)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 10, 10.1 to 10.6 and subclauses of IS/IEC 62368-1)(Radiation)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex.B, B.1 to B.4 including its subclauses of IS/IEC 62368-1))(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex.C, C.1 to C.2 including its subclauses of IS/IEC 62368-1))(UV radiation)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex. D, D.1, D.2, D.3 of IS/IEC 62368-1)(Test generators)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex E, E.1, E.2, E.3 of IS/IEC 62368-1)(Test conditions for equipment containing audio amplifiers)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. F, F.1 to F.5 including its subclauses of IS/IEC 62368-1)(Equipment markings, instructions, and instructional safeguards)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1)(Components)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. H, H1 to H3 including its subclauses of IS/IEC 62368-1)(Criteria for telephone ringing signals .)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex I of IS/IEC 62368-1)(Overvoltage categories)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1)(Insulated winding wires for use without interleaved insulation)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1)(Safety Interlocks)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. L .L1 to L.9 including its subclauses of IS/IEC 62368-1)(Disconnect devices)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1)(Equipment containing batteries and their protection circuits)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.N of IS/IEC 62368-1)(Electrochemical potentials)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.O of IS/IEC 62368-1)(Measurement of creepage distances and clearances)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.P, P.1 to P.4 and its subclauses of IS/IEC 62368-1)(Safeguards against conductive objects)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.Q, Q.1 to Q.2 and its subclauses of IS/IEC 62368-1)(Circuits intended for interconnection with building wiring)	-	2000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.R, R.1 to R.4 and its subclauses of IS/IEC 62368-1)(Limited short-circuit test)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.S S.1 to S.5 and its subclauses of IS/IEC 62368-1)(Tests for resistance to heat and fire)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex T, T.1 to T.11 and its subclauses of IS/IEC 62368-1)(Mechanical strength tests)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex U, U.1 to U.3 and its subclauses of IS/IEC 62368-1)(Mechanical strength of CRTs and protection against the effects of implosion)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex V, V.1 to V.2 and its subclauses of IS/IEC 62368-1)(Determination of accessible parts)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex X of IS/IEC 62368-1)(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1)(Construction requirements for outdoor enclosure)	-	1500	10% DISCOUNT TO BIS
Cl-4.1, 6.2 Table-1 (i)(Objects not recognized as banknotes)	-	1500	10% DISCOUNT TO BIS
Cl-4.1, 6.2 Table-1 (ii)(Suspect/counterfeit banknotes)	-	1500	10% DISCOUNT TO BIS
Cl-4.1, 6.2 Table-1 (iii)(Banknotes that are not clearly authenticated)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, 6.2 Table-1 (iv) (a)(Banknotes that are identified as genuine and fit;)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, 6.2 Table-1 (iv) (b)(Banknotes that are identified as genuine and unfit)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, Table-2 (i)(Piece counting)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, Table-2 (ii)(Value counting)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, Table-2 (iii)(Authenticity determination)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, Table-2 (iv)(Fitness determination)	-	2500	10% DISCOUNT TO BIS
Cl-4.1, Table-2 (v)(Sorting of banknotes)	-	2500	10% DISCOUNT TO BIS
Cl-4.3, Table-3 (i)(Serial number recognition)	-	2500	10% DISCOUNT TO BIS
Cl-4.3, Table-3 (ii)(Data storage and reproduction)	-	2500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (i)(Marking and instructions)	-	2500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (ii)(Protection against access to live parts)	-	2500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (iii)(Power input and current)	-	2500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (iv)(Heating)	-	2500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (v)(Creepage clearance and solid insulation)	-	2500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (vi)(Humidity conditioning)	-	1500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (vii)(Leakage current and electric strength at operating temperature)	-	1500	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (viii)(Provision for earthing)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1)(General Requirements)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.2 and subclauses of IS/IEC 62368-1)(Energy source classifications)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.3 and subclauses of IS/IEC 62368-1)(Protection against energy sources)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.4 and subclauses of IS/IEC 62368-1)(Safeguards)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.5 and subclauses of IS/IEC 62368-1)("Explosion- Requirements ")	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.6 and subclauses of IS/IEC 62368-1)(Fixing of conductors- Requirements)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.7 and subclauses of IS/IEC 62368-1)(Equipment for direct insertion into mains socket-outlets)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.8 and subclausesof IS/IEC 62368-1)(Equipment containing coin / button cell batteries)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.9 and subclauses of IS/IEC 62368-1)(Likelihood of fire or shock due to entry of conductive objects)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.10 and subclauses of IS/IEC 62368-1)(Components requirements)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.2 and subclauses of IS/IEC 62368-1)(Classification and limits of electrical energy sources)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.3 and subclauses of IS/IEC 62368-1)(Protection against electrical energy sources)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1)(Insulation materials and requirements)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.5 and subclauses of IS/IEC 62368-1)(Components as safeguards)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.6 and subclauses of IS/IEC 62368-1)(Protective conductor)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.7 and subclauses of IS/IEC 62368-1)(Prospective touch voltage, touch current and protective conductor current.)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.8 and subclauses of IS/IEC 62368-1)(Backfeed safeguard in battery backed up supplies)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.1 of IS/IEC 62368-1)(Electrically-caused fire)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.2 and subclauses of IS/IEC 62368-1)(Classification of power sources (PS) and potential ignition sources (PIS).)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.3 and subclauses of IS/IEC 62368-1)(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1500	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.4 and subclauses of IS/IEC 62368-1)(Safeguards against fire under single fault conditions)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.5 and subclauses of IS/IEC 62368-1)(Internal and external wiring)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.6 and subclauses of IS/IEC 62368-1)(Safeguards against fire due to the connection of additional equipment)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 7, 7.1 to 7.6 and subclauses of IS/IEC 62368-1)(Injury caused by hazardous substances)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 8, 8.1 to 8.12 and subclauses of IS/IEC 62368-1)(Mechanically-caused injury)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 9, 9.1 to 9.6 and subclauses of IS/IEC 62368-1)(Thermal burn injury)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 10, 10.1 to 10.6 and subclauses of IS/IEC 62368-1)(Radiation)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex.B, B.1 to B.4 including its subclauses of IS/IEC 62368-1))(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex.C, C.1 to C.2 including its subclauses of IS/IEC 62368-1))(UV radiation)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex. D, D.1, D.2, D.3 of IS/IEC 62368-1)(Test generators)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex E, E.1, E.2, E.3 of IS/IEC 62368-1)(Test conditions for equipment containing audio amplifiers)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. F, F.1 to F.5 including its subclauses of IS/IEC 62368-1)(Equipment markings, instructions, and instructional safeguards)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1)(Components)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. H, H1 to H3 including its subclauses of IS/IEC 62368-1)(Criteria for telephone ringing signals .)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex I of IS/IEC 62368-1)(Overvoltage categories)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1)(Insulated winding wires for use without interleaved insulation)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1)(Safety Interlocks)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. L .L1 to L.9 including its subclauses of IS/IEC 62368-1)(Disconnect devices)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1)(Equipment containing batteries and their protection circuits)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.N of IS/IEC 62368-1)(Electrochemical potentials)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.O of IS/IEC 62368-1)(Measurement of creepage distances and clearances)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.P, P.1 to P.4 and its subclauses of IS/IEC 62368-1)(Safeguards against conductive objects)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.Q, Q.1 to Q.2 and its subclauses of IS/IEC 62368-1)(Circuits intended for interconnection with building wiring)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.R, R.1 to R.4 and its subclauses of IS/IEC 62368-1)(Limited short-circuit test)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.S S.1 to S.5 and its subclauses of IS/IEC 62368-1)(Tests for resistance to heat and fire)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex T, T.1 to T.11 and its subclauses of IS/IEC 62368-1)(Mechanical strength tests)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex U, U.1 to U.3 and its subclauses of IS/IEC 62368-1)(Mechanical strength of CRTs and protection against the effects of implosion)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex V, V.1 to V.2 and its subclauses of IS/IEC 62368-1)(Determination of accessible parts)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex X of IS/IEC 62368-1)(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1)(Construction requirements for outdoor enclosure)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (i)(Marking and instructions)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (ii)(Protection against access to live parts)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (iii)(Power input and current)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (iv)(Heating)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (v)(Creepage clearance and solid insulation)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (vi)(Humidity conditioning)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (vii)(Leakage current and electric strength at operating temperature)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (viii)(Provision for earthing)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1)(General Requirements)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.2 and subclauses of IS/IEC 62368-1)(Energy source classifications)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.3 and subclauses of IS/IEC 62368-1)(Protection against energy sources)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.4 and subclauses of IS/IEC 62368-1)(Safeguards)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.5 and subclauses of IS/IEC 62368-1)("Explosion- Requirements ")	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.6 and subclauses of IS/IEC 62368-1)(Fixing of conductors- Requirements)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.7 and subclauses of IS/IEC 62368-1)(Equipment for direct insertion into mains socket-outlets)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.8 and subclausesof IS/IEC 62368-1)(Equipment containing coin / button cell batteries)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.9 and subclauses of IS/IEC 62368-1)(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 4.10 and subclauses of IS/IEC 62368-1)(Components requirements)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.2 and subclauses of IS/IEC 62368-1)(Classification and limits of electrical energy sources)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.3 and subclauses of IS/IEC 62368-1)(Protection against electrical energy sources)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1)(Insulation materials and requirements)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.5 and subclauses of IS/IEC 62368-1)(Components as safeguards)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.6 and subclauses of IS/IEC 62368-1)(Protective conductor)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.7 and subclauses of IS/IEC 62368-1)(Prospective touch voltage, touch current and protective conductor current.)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 5.8 and subclauses of IS/IEC 62368-1)(Backfeed safeguard in battery backed up supplies)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.1 of IS/IEC 62368-1)(Electrically-caused fire)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.2 and subclauses of IS/IEC 62368-1)(Classification of power sources (PS) and potential ignition sources (PIS).)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.3 and subclauses of IS/IEC 62368-1)(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.4 and subclauses of IS/IEC 62368-1)(Safeguards against fire under single fault conditions)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.5 and subclauses of IS/IEC 62368-1)(Internal and external wiring)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 6.6 and subclauses of IS/IEC 62368-1)(Safeguards against fire due to the connection of additional equipment)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 7, 7.1 to 7.6 and subclauses of IS/IEC 62368-1)(Injury caused by hazardous substances)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 8, 8.1 to 8.12 and subclauses of IS/IEC 62368-1)(Mechanically-caused injury)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 9, 9.1 to 9.6 and subclauses of IS/IEC 62368-1)(Thermal burn injury)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Cl 10, 10.1 to 10.6 and subclauses of IS/IEC 62368-1)(Radiation)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex.B, B.1 to B.4 including its subclauses of IS/IEC 62368-1))(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex.C, C.1 to C.2 including its subclauses of IS/IEC 62368-1))(UV radiation)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements (Annex. D, D.1, D.2, D.3 of IS/IEC 62368-1)(Test generators)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex E, E.1, E.2, E.3 of IS/IEC 62368-1)(Test conditions for equipment containing audio amplifiers)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. F, F.1 to F.5 including its subclauses of IS/IEC 62368-1)(Equipment markings, instructions, and instructional safeguards)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1)(Components)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. H, H1 to H3 including its subclauses of IS/IEC 62368-1)(Criteria for telephone ringing signals .)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex I of IS/IEC 62368-1)(Overvoltage categories)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1)(Insulated winding wires for use without interleaved insulation)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1)(Safety Interlocks)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. L .L1 to L.9 including its subclauses of IS/IEC 62368-1)(Disconnect devices)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1)(Equipment containing batteries and their protection circuits)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.N of IS/IEC 62368-1)(Electrochemical potentials)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.O of IS/IEC 62368-1)(Measurement of creepage distances and clearances)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.P, P.1 to P.4 and its subclauses of IS/IEC 62368-1)(Safeguards against conductive objects)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.Q, Q.1 to Q.2 and its subclauses of IS/IEC 62368-1)(Circuits intended for interconnection with building wiring)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.R, R.1 to R.4 and its subclauses of IS/IEC 62368-1)(Limited short-circuit test)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex.S S.1 to S.5 and its subclauses of IS/IEC 62368-1)(Tests for resistance to heat and fire)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex T, T.1 to T.11 and its subclauses of IS/IEC 62368-1)(Mechanical strength tests)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex U, U.1 to U.3 and its subclauses of IS/IEC 62368-1)(Mechanical strength of CRTs and protection against the effects of implosion)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex V, V.1 to V.2 and its subclauses of IS/IEC 62368-1)(Determination of accessible parts)	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex X of IS/IEC 62368-1)(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	1000	10% DISCOUNT TO BIS
Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1)(Construction requirements for outdoor enclosure)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (i)(Marking and instructions)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (ii)(Protection against access to live parts)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (iii)(Power input and current)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (iv)(Heating)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (v)(Creepage clearance and solid insulation)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (vi)(Humidity conditioning)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (vii)(Leakage current and electric strength at operating temperature)	-	1000	10% DISCOUNT TO BIS
Cl-6.1, Table-4 (viii)(Provision for earthing)	-	1000	10% DISCOUNT TO BIS

23 Oct, 2028

-
including w.e.f 09.10.2024. Only for Cl.4.2 safety requirement

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	1650	20% discount to bIs
6(CLASSIFICATION)	-	1650	20% discount to bIs
7(MARKING AND INSTRUCTIONS)	-	1650	20% discount to bIs
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1650	20% discount to bIs
10(POWER INPUT AND CURRENT)	-	1650	20% discount to bIs
11(HEATING)	-	1650	20% discount to bIs
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1650	20% discount to bIs
14(TRANSIENT OVERVOLTAGES)	-	1650	20% discount to bIs
15(MOISTURE RESISTANCE)	-	1650	20% discount to bIs
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
18(ENDURANCE)	-	1650	20% discount to bIs
19(ABNORMAL OPERATION)	-	1650	20% discount to bIs
20(STABILITY AND MECHANICAL HAZARDS)	-	1650	20% discount to bIs
21(MECHANICAL STRENGTH)	-	1650	20% discount to bIs
22(CONSTRUCTION)	-	1650	20% discount to bIs
23(INTERNAL WIRING)	-	1650	20% discount to bIs
24(COMPONENTS)	-	1650	20% discount to bIs
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1650	20% discount to bIs
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1650	20% discount to bIs
27(PROVISION FOR EARTHING)	-	1650	20% discount to bIs
28(SCREWS AND CONNECTIONS)	-	1650	20% discount to bIs
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1650	20% discount to bIs
30(RESISTANCE TO HEAT AND FIRE)	-	1650	20% discount to bIs
31(RESISTANCE TO RUSTING)	-	1650	20% discount to bIs
19.13(ABNORMAL OPERATION)	-	1650	20% discount to bIs
19.101(Abnormal Operation)	-	1650	20% discount to bIs
19.102(Abnormal Operation)	-	1650	20% discount to bIs
19.11.4.4(Surge immunity test)	-	2650	20% discount to bIs
4(GENERAL REQUIREMENT)	-	1650	20% discount to bIs
6(CLASSIFICATION)	-	1650	20% discount to bIs
7(MARKING AND INSTRUCTIONS)	-	1650	20% discount to bIs
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1650	20% discount to bIs
10(POWER INPUT AND CURRENT)	-	1650	20% discount to bIs
11(HEATING)	-	1650	20% discount to bIs
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1650	20% discount to bIs
14(TRANSIENT OVERVOLTAGES)	-	1650	20% discount to bIs
15(MOISTURE RESISTANCE)	-	1650	20% discount to bIs
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
18(ENDURANCE)	-	1650	20% discount to bIs
19(ABNORMAL OPERATION)	-	1650	20% discount to bIs
20(STABILITY AND MECHANICAL HAZARDS)	-	1650	20% discount to bIs
21(MECHANICAL STRENGTH)	-	1650	20% discount to bIs
22(CONSTRUCTION)	-	1650	20% discount to bIs
23(INTERNAL WIRING)	-	1650	20% discount to bIs
24(COMPONENTS)	-	1650	20% discount to bIs
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1650	20% discount to bIs
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1650	20% discount to bIs
27(PROVISION FOR EARTHING)	-	1650	20% discount to bIs
28(SCREWS AND CONNECTIONS)	-	1650	20% discount to bIs
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1650	20% discount to bIs
30(RESISTANCE TO HEAT AND FIRE)	-	1650	20% discount to bIs
31(RESISTANCE TO RUSTING)	-	1650	20% discount to bIs
19.13(ABNORMAL OPERATION)	-	1650	20% discount to bIs
19.101(Abnormal Operation)	-	1650	20% discount to bIs
19.102(Abnormal Operation)	-	1650	20% discount to bIs
19.11.4.4(Surge immunity test)	-	1650	20% discount to bIs
4(GENERAL REQUIREMENT)	-	1650	20% discount to bIs
6(CLASSIFICATION)	-	1650	20% discount to bIs
7(MARKING AND INSTRUCTIONS)	-	1650	20% discount to bIs
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1650	20% discount to bIs
10(POWER INPUT AND CURRENT)	-	1650	20% discount to bIs
11(HEATING)	-	1650	20% discount to bIs
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1650	20% discount to bIs
14(TRANSIENT OVERVOLTAGES)	-	1650	20% discount to bIs
15(MOISTURE RESISTANCE)	-	1650	20% discount to bIs
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
18(ENDURANCE)	-	1650	20% discount to bIs
19(ABNORMAL OPERATION)	-	1650	20% discount to bIs
20(STABILITY AND MECHANICAL HAZARDS)	-	1650	20% discount to bIs
21(MECHANICAL STRENGTH)	-	1650	20% discount to bIs
22(CONSTRUCTION)	-	1650	20% discount to bIs
23(INTERNAL WIRING)	-	1650	20% discount to bIs
24(COMPONENTS)	-	1650	20% discount to bIs
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1650	20% discount to bIs
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1650	20% discount to bIs
27(PROVISION FOR EARTHING)	-	1650	20% discount to bIs
28(SCREWS AND CONNECTIONS)	-	1650	20% discount to bIs
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1650	20% discount to bIs
30(RESISTANCE TO HEAT AND FIRE)	-	1650	20% discount to bIs
31(RESISTANCE TO RUSTING)	-	1650	20% discount to bIs
19.13(ABNORMAL OPERATION)	-	1650	20% discount to bIs
19.101(Abnormal Operation)	-	1650	20% discount to bIs
19.102(Abnormal Operation)	-	1650	20% discount to bIs
19.11.4.4(Surge immunity test)	-	1650	20% discount to bIs

23 Oct, 2028

-
including w.e.f 09.10.2024 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	2000	20% discount to BIS
4.6(Power interface)	-	2000	20% discount to BIS
4.7(Marking & instructions)	-	2000	20% discount to BIS
5.1(Protection against shock and energy hazards)	-	2000	20% discount to BIS
5.2(Requirement of auxiliary circuits)	-	2000	20% discount to BIS
5.3(Protective earthing and bonding)	-	2000	20% discount to BIS
5.4(AC and DC power isolation)	-	1500	20% discount to BIS
5.5(Over current and earth fault condition)	-	1500	20% discount to BIS
5.6(Safety interlocks)	-	1250	20% discount to BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1250	20% discount to BIS
6.1(Wiring, connections and supply)	-	1250	20% discount to BIS
6.2(Connection to power)	-	1250	20% discount to BIS
6.3(Wiring terminals for external power conductors)	-	1250	20% discount to BIS
7.1(Enclosure)	-	1250	20% discount to BIS
7.2(STABILITY)	-	1250	20% discount to BIS
7.3(MECHANICAL STRENGTH)	-	1250	20% discount to BIS
7.4(Construction details)	-	1250	20% discount to BIS
7.5(Resistance to fire)	-	1250	20% discount to BIS
7.6(Battery location)	-	1250	20% discount to BIS
7.7(Temperature rise)	-	1250	20% discount to BIS
8.1(General procision for earth leakage)	-	1250	20% discount to BIS
8.2(Electric Strength)	-	1250	20% discount to BIS
8.3(Abnormal operating and fault conditions)	-	1250	20% discount to BIS
9.0(Connection to telecommunication networks)	-	1250	20% discount to BIS

23 Oct, 2028

-
-

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	20% discount to BIS
5(General Safety Considerations)	-	2000	20% discount to BIS
5.1(General)	-	2000	20% discount to BIS
5.2(Insulation and Wiring)	-	2000	20% discount to BIS
5.3(Venting)	-	2000	20% discount to BIS
5.4(Temperature, Voltage and Current Management)	-	2000	20% discount to BIS
5.5(Terminal Contacts)	-	2000	20% discount to BIS
5.6(Assembly of Cells into batteries)	-	2000	20% discount to BIS
5.7(Quality Plan)	-	2000	20% discount to BIS
6(Tyoe Test amd Sample Size)	-	2000	20% discount to BIS
7(Specific requirements and tests)	-	2000	20% discount to BIS
7.1(Charging procedure for test purposes)	-	2000	20% discount to BIS
7.2(Intended Use)	-	2000	20% discount to BIS
7.3(Reasonably foreseeable misuse)	-	2000	20% discount to BIS
8(Information for safety)	-	2000	20% discount to BIS
8.1(General)	-	2000	20% discount to BIS
8.2(Small Cell and battery safety information)	-	2000	20% discount to BIS
9(Marking)	-	2000	20% discount to BIS
9.1(Cell Marking)	-	2000	20% discount to BIS
9.2(Battery Marking)	-	2000	20% discount to BIS
9.3(Caution for ingestion of small cells and batteries)	-	2000	20% discount to BIS
9.4(Other information)	-	2000	20% discount to BIS
10(Packaging)	-	2000	20% discount to BIS

23 Oct, 2028

-
-

IS 16046 : Part 2 (2018)

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	20% discount to BIS
5(General Safety Considerations)	-	2000	20% discount to BIS
5.1(General)	-	2000	20% discount to BIS
5.2(Insulation and Wiring)	-	2000	20% discount to BIS
5.3(Venting)	-	2000	20% discount to BIS
5.4(Temperature, Voltage and Current Management)	-	2000	20% discount to BIS
5.5(Terminal Contacts)	-	2000	20% discount to BIS
5.6(Assembly of Cells into batteries)	-	2000	20% discount to BIS
5.7(Quality Plan)	-	2000	20% discount to BIS
5.8(Battery Safety Components)	-	2000	20% discount to BIS
6(Type Test and Sample Size)	-	2000	20% discount to BIS
7(Specific requirements and tests)	-	2000	20% discount to BIS
7.1(Charging procedure for test purposes)	-	2000	20% discount to BIS
7.2(Intended Use)	-	2000	20% discount to BIS
7.3(Reasonably foreseeable misuse)	-	2000	20% discount to BIS
8(Information for safety)	-	2000	20% discount to BIS
8.1(General)	-	2000	20% discount to BIS
8.2(Small Cell and battery safety information)	-	2000	20% discount to BIS
9(Marking)	-	2000	20% discount to BIS
9.1(Cell Marking)	-	2000	20% discount to BIS
9.2(Battery Marking)	-	2000	20% discount to BIS
9.3(Caution for ingestion of small cells and batteries)	-	2000	20% discount to BIS
9.4(Other information)	-	1000	20% discount to BIS
10(Packaging)	-	1000	20% discount to BIS

23 Oct, 2028

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	1200	20% discount to BIS
1.7(Markings and instructions)	-	1200	20% discount to BIS
2.1(Protection from electric shock and energy hazards)	-	1200	20% discount to BIS
2.2(SELV circuits)	-	1200	20% discount to BIS
2.3(TNV circuits)	-	1200	20% discount to BIS
2.4(Limited current circuits)	-	1200	20% discount to BIS
2.5(Limited power sources .)	-	1200	20% discount to BIS
2.6(Provisions for earthing and bonding)	-	1200	20% discount to BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	1200	20% discount to BIS
2.8(Safety interlocks)	-	1200	20% discount to BIS
2.9(Electrical insulation)	-	1200	20% discount to BIS
2.10(Clearances, creepage distances and distances through insulation)	-	1200	20% discount to BIS
3.1(General)	-	1200	20% discount to BIS
3.2(Connection to a mains supply)	-	1200	20% discount to BIS
3.3(Wiring terminals for connection of external conductors)	-	1200	20% discount to BIS
3.4(Disconnection from the mains supply)	-	1200	20% discount to BIS
3.5(Interconnection of equipment)	-	1200	20% discount to BIS
4.1(Stability)	-	1200	20% discount to BIS
4.2(Mechanical strength)	-	1200	20% discount to BIS
4.3(Design and construction)	-	1200	20% discount to BIS
4.4(Protection against hazardous moving parts)	-	1200	20% discount to BIS
4.5(Thermal requirements)	-	1200	20% discount to BIS
4.6(Openings in enclosures)	-	1200	20% discount to BIS
4.7(Resistance to fire)	-	1200	20% discount to BIS
5.1(Touch current and protective conductor curren)	-	1000	20% discount to BIS
5.2(Electric strength)	-	1000	20% discount to BIS
5.3(Abnormal operating and fault conditions)	-	1000	20% discount to BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	20% discount to BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	20% discount to BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	20% discount to BIS
7.1(General)	-	1000	20% discount to BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	20% discount to BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	20% discount to BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	20% discount to BIS

23 Oct, 2028

-
Excluding:Cl. 1.5 (Components), Cl.4.3.13.2 (Ionizing radiation test ), Cl.4.3.13.3 (Effect of UV on materials ), Cl.4.3.13.4 (Human exposure to UV radiation ), Cl.4.3.13.5 (Effect of lasers (including LED)

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	20% discount to BIS
5(Classification of Luminaires')	-	2500	20% discount to BIS
6.0(Marking)	-	2500	20% discount to BIS
7.0(Construction)	-	2500	20% discount to BIS
8.0(Creepage Distance and Clearances)	-	2500	20% discount to BIS
9.0(Provision for earthing)	-	2500	20% discount to BIS
10.0(Terminals)	-	2500	20% discount to BIS
11.0(External & Internal Wiring)	-	2500	20% discount to BIS
12.0(Protection against electric shock)	-	2500	20% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	1500	20% discount to BIS
14.0(Resistance to Dust & Moisture)	-	1500	20% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	1500	20% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	1500	20% discount to BIS
17.0(Photometric Test)	-	1500	20% discount to BIS

23 Oct, 2028

-
Excluding: UV radiation for metal halide lamps (Cl.4.24) & Photometric test (Cl.17), Electro mechanical contact system (Cl.4.11.6), Short Circuit Protection (Cl.4.26.2)

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	20% discount to BIS
5(Classification of Luminaires')	-	2500	20% discount to BIS
6(Marking)	-	2500	20% discount to BIS
7(Construction)	-	2500	20% discount to BIS
8(Creepage Distance and Clearances)	-	2500	20% discount to BIS
9(Provision for earthing)	-	2500	20% discount to BIS
10(Terminals)	-	2500	20% discount to BIS
11(External & Internal Wiring)	-	2500	20% discount to BIS
12(Protection against electric shock)	-	2500	20% discount to BIS
13(Endurance Tests and Thermal Tests)	-	2500	20% discount to BIS
14(Resistance to Dust and Moisture)	-	2500	20% discount to BIS
15(Insulation Resistance and Electric Strength)	-	2500	20% discount to BIS
16(Resistance to Heat , fire and tracking)	-	2500	20% discount to BIS
17(Photometric Test)	-	2500	20% discount to BIS

23 Oct, 2028

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	20% discount to BIS
5(Classification of Luminaires')	-	2500	20% discount to BIS
6.0(Marking)	-	2500	20% discount to BIS
7.0(Construction)	-	2500	20% discount to BIS
8.0(Creepage Distance and Clearances)	-	2500	20% discount to BIS
9.0(Provision for earthing)	-	2500	20% discount to BIS
10.0(Terminals)	-	2500	20% discount to BIS
11.0(External & Internal Wiring)	-	2500	20% discount to BIS
12.0(Protection against electric shock)	-	2500	20% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	2500	20% discount to BIS
14.0(Resistance to Dust & Moisture)	-	2500	20% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	2500	20% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	2500	20% discount to BIS
17.0(Photometric Test)	-	2500	20% discount to BIS

23 Oct, 2028

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	20% discount to BIS
5(Classification of Luminaires')	-	2500	20% discount to BIS
6.0(Marking)	-	2500	20% discount to BIS
7.0(Construction)	-	2500	20% discount to BIS
8.0(Creepage Distance and Clearances)	-	2500	20% discount to BIS
9.0(Provision for earthing)	-	2500	20% discount to BIS
10.0(Terminals)	-	2500	20% discount to BIS
11.0(External & Internal Wiring)	-	2500	20% discount to BIS
12.0(Protection against electric shock)	-	2500	20% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	2500	20% discount to BIS
14.0(Resistance to Dust & Moisture)	-	2500	20% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	2500	20% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	2500	20% discount to BIS
17.0(Photometric Test)	-	2500	20% discount to BIS

23 Oct, 2028

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Packing -Each Package shall bear the following Particulars)	-	2500	20% discount to BIS
4(General Test Requireements)	-	2500	20% discount to BIS
5(Classification of Luminaires')	-	2500	20% discount to BIS
6.0(Marking)	-	2500	20% discount to BIS
7.0(Construction)	-	2500	20% discount to BIS
8.0(Creepage Distance and Clearances)	-	2500	20% discount to BIS
9.0(Provision for earthing)	-	2500	20% discount to BIS
10.0(Terminals)	-	2500	20% discount to BIS
11.0(External & Internal Wiring)	-	2500	20% discount to BIS
12.0(Protection against electric shock)	-	2500	20% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	2500	20% discount to BIS
14.0(Resistance to Dust & Moisture)	-	2500	20% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	2500	20% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	2500	20% discount to BIS

23 Oct, 2028

-
-

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	20% discount to BIS
5(Classification of Luminaires')	-	2000	20% discount to BIS
6.0(Marking)	-	2000	20% discount to BIS
7.0(Construction)	-	2000	20% discount to BIS
8.0(Creepage Distance and Clearances)	-	2000	20% discount to BIS
9.0(Provision for earthing)	-	2000	20% discount to BIS
10.0(Terminals)	-	2000	20% discount to BIS
11.0(External & Internal Wiring)	-	2000	20% discount to BIS
12.0(Protection against electric shock)	-	2000	20% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	2000	20% discount to BIS
14.0(Resistance to Dust & Moisture)	-	2000	20% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	2000	20% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	1500	20% discount to BIS
17.0(Functional Safety)	-	2000	20% discount to BIS
18.0(Changeover Operation)	-	1500	20% discount to BIS
19.0(High Temperature Operation)	-	1500	20% discount to BIS
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	1500	20% discount to BIS
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	1500	20% discount to BIS
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	1500	20% discount to BIS

23 Oct, 2028

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2500	20% discount to BIS
7(Marking and instructions)	-	2500	20% discount to BIS
8(Protection against live parts)	-	2500	20% discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2500	20% discount to BIS
10(POWER INPUT AND CURRENT)	-	2500	20% discount to BIS
11(HEATING)	-	2500	20% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500	20% discount to BIS
14(IMPULSE VOLTAGE TEST)	-	2500	20% discount to BIS
15(HUMIDITY TREATMENT TEST)	-	2500	20% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2500	20% discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	20% discount to BIS
18(ENDURANCE)	-	2500	20% discount to BIS
19(ABNORMAL OPERATION)	-	2500	20% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	2500	20% discount to BIS
21(MECHANICAL STRENGTH)	-	2500	20% discount to BIS
22(CONSTRUCTION)	-	2500	20% discount to BIS
23(INTERNAL WIRING)	-	2500	20% discount to BIS
24(COMPONENTS)	-	2500	20% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	20% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	20% discount to BIS
27(PROVISION FOR EARTHING)	-	2500	20% discount to BIS
28(SCREWS AND CONNECTIONS)	-	2500	20% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2500	20% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	2500	20% discount to BIS
31(RESISTANCE TO RUSTING)	-	2500	20% discount to BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2500	20% discount to BIS

23 Oct, 2028

-
Excluding: EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Component(Cl.24)

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	3000	20% discount to BIS
20.5(Classification of Luminaires')	-	3000	20% discount to BIS
20.6(Marking)	-	3000	20% discount to BIS
20.7(Construction)	-	3000	20% discount to BIS
20.8(Creepage Distance and Clearances)	-	2000	20% discount to BIS
20.9(Provision for earthing)	-	2000	20% discount to BIS
20.10(Terminals)	-	2000	20% discount to BIS
20.11(External & Internal Wiring)	-	2000	20% discount to BIS
20.12(Protection against electric shock)	-	2000	20% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	2000	20% discount to BIS
20.14(Resistance to Dust & Moisture)	-	2000	20% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	2000	20% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	2000	20% discount to BIS

23 Oct, 2028

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	20% discount to BIS
8(Protection against accidental contact with live parts)	-	2000	20% discount to BIS
9(Terminals)	-	2000	20% discount to BIS
10(PROVISION FOR EARTHING)	-	2000	20% discount to BIS
11(MOISTURE RESISTANCE)	-	2000	20% discount to BIS
12(Electric Strength)	-	2000	20% discount to BIS
13(Thermal endurance test for winding of ballasts)	-	2000	20% discount to BIS
14(Fault conditions)	-	2000	20% discount to BIS
15(Transformer heating)	-	2000	20% discount to BIS
16(Construction)	-	2000	20% discount to BIS
17(Creepage distance and clearances)	-	2000	20% discount to BIS
18(Screws, current carrying parts and connections)	-	2000	20% discount to BIS
19(Resistance to heat, fire and tracking)	-	2000	20% discount to BIS
20(Resistance to corrosion)	-	2000	20% discount to BIS

23 Oct, 2028

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2500	20% discount to BIS
6(Interchangeability)	-	2500	20% discount to BIS
7(Protection against accidental contact with live parts)	-	2500	20% discount to BIS
8(Insulation Resistance and Electric Strength)	-	2500	20% discount to BIS
9(MECHANICAL STRENGTH)	-	2500	20% discount to BIS
10(cap temperature)	-	2500	20% discount to BIS
11(Resistance to Heat)	-	2500	20% discount to BIS
12(Resistance to Flame and Ignition)	-	2500	20% discount to BIS
13(Fault conditions)	-	2500	20% discount to BIS
14(Creepage distance and clearances)	-	2500	20% discount to BIS

23 Oct, 2028

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2500	20% discount to BIS
6(Hazardous radiations)	-	2500	20% discount to BIS
7(Heating under normal operating conditions)	-	2500	20% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	2500	20% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	2500	20% discount to BIS
10(Insulation requirements)	-	2500	20% discount to BIS
11(Fault conditions)	-	2500	20% discount to BIS
12(Mechanical strength)	-	2500	20% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	2500	20% discount to BIS
14(Components)	-	2500	20% discount to BIS
15(TERMINALS)	-	2500	20% discount to BIS
16(External flexible cords)	-	2500	20% discount to BIS
17(Electrical connections and mechanical fixings)	-	2500	20% discount to BIS
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	2500	20% discount to BIS
19(Stability and mechanical hazards)	-	2500	20% discount to BIS
20(Resistance to fire)	-	2500	20% discount to BIS

23 Oct, 2028

-
Excluding: Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Components test (Cl.14)

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10000	20% discount to BIS
5.2(Message Readability)	-	10000	20% discount to BIS
6(Marking)	-	1000	20% discount to BIS
5.1(Inputting of text)	-	10000	20% discount to BIS
5.2(Message Readability)	-	10000	20% discount to BIS
6(Marking)	-	1000	20% discount to BIS

23 Oct, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Classic Instrumentation Pvt. Ltd. (8135126), Noida

C-45, SECTOR-65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9810285868 info@classiclabindia.com

Scope List