BIS - LIMS (Laboratory Information Management System)

Hasti Engineers LLP

KAILASH INDUSTRIAL AREA, 40 FEET SWATI RESIDENCY MAIN ROAD,, NR.SANDHIYA BRIDGE, GONDAL CHOWKDI,RAJKOT, Rajkot, Rajkot, Gujarat, 360002

9824483677 bliss.niraj@gmail.com

Scope List

Reset

2 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

0.37kW to 20kW

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	10	-
8.1.1(Design Features)	-	10	-
8.1.4(Design Features)	-	10	-
8.1.5(Design Features)	-	10	-
9(Efficiency)	-	10	-
10(Performance (Cl 17.1 of IS 5120))	-	10	-
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	10	-
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	10	-
10(Fluid Passages (Cl 17.3 of IS 5120))	-	10	-
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	10	-
10(Lantern Ring (Cl 17.5 of IS 5120))	-	10	-
10(Casing (Cl 17.6 of IS 5120))	-	10	-
10(Impeller (Cl 17.7 of IS 5120))	-	10	-
10(Shaft (Cl 17.8 of IS 5120))	-	10	-
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	10	-
10(Bearings (Cl 17.10 of IS 5120))	-	10	-
10(Bearings (Cl 17.10.1 of IS 5120))	-	10	-
10(Bearings (Cl 17.10.2 of IS 5120))	-	10	-
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	10	-
10(Base Plates (Cl 17.12 of IS 5120))	-	10	-
10(Prime Mover (Cl 17.13 of IS 5120))	-	10	-
10(Name Plate (Cl 17.14 of IS 5120))	-	10	-
10(Name Plate (Cl 17.14 of IS 5120))	-	10	-
10(Name Plate (Cl 17.14 of IS 5120))	-	10	-
10(Name Plate (Cl 17.14.1 of IS 5120))	-	10	-
10.2(Casing)	-	10	-
10.3(Impeller)	-	10	-
10.4.1(Shaft)	-	10	-
10.4.2(Shaft)	-	10	-
10.5.1(Balancing)	-	10	-
10.5.2(Balancing)	-	10	-
10.5.3(Balancing)	-	10	-
10.5.4(Balancing)	-	10	-
10.6.1( Provision for Earthing)	-	10	-
10.6.2( Provision for Earthing)	-	10	-
10.6.3( Provision for Earthing)	-	10	-
10.6.4( Provision for Earthing)	-	10	-
10.7.1(Terminal Marking and Direction of Rotation)	-	10	-
10.7.2(Terminal Marking and Direction of Rotation)	-	10	-
10.7.3(Terminal Marking and Direction of Rotation)	-	10	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	10	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	10	-
15.5(Hydrostatic Pressure Test)	-	100	-
16.1.1( Guarantee of Performance)	-	2500	-
16.1.2( Guarantee of Performance)	-	10	-
16.1.3( Guarantee of Performance)	-	10	-
16.1.4( Guarantee of Performance)	-	10	-
16.1.5( Guarantee of Performance)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1.3(Marking)	-	10	-
7(Constructional features)	-	10	-
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	10	-
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	10	-
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	10	-
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	10	-
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	10	-
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	10	-
8(Design Features)	-	10	-
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	10	-
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	10	-
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	10	-
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	10	-
12(Cable)	-	10	-
12.1(Flat/Round cables as per IS694 shall be used)	-	10	-
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	10	-
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	10	-
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	10	-
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	10	-
14.10.1(Type test)	-	10	-
14.10.1(a)(Insulation Resistance test)	-	50	-
14.10.1(b)(High Voltage test)	-	200	-
14.10.1(c)(Measurement of stator resistance)	-	100	-
14.10.1(d)(No load test at rated voltage)	-	100	-
14.10.1(e)(Reduced voltage running up test at no load)	-	100	-
14.10.1(f)(Locked rotor)	-	500	-
14.10.1(g)(Breakaway (starting) torque)	-	500	-
14.10.1(h)(Leakage current test;)	-	100	-
14.10.1(j)(Temperature rise test at rated voltage)	-	2000	-
14.10.1(k)(Temperature rise test at reduced voltage)	-	1500	-
16.1(Guarntee of Performance)	-	2500	-
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	10	-
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	10	-
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	10	-
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	10	-
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	10	-
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	10	-
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	10	-
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-
18.1(Marking)	-	10	-

Complete

21 Aug, 2026

-
-

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

0.37 kw to 20kw