BIS - LIMS (Laboratory Information Management System)

TECHVISION TESTING LAB PRIVATE LIMITED

B-6 (3rd Floor, 2nd Floor & Basement), Commercial, Complex, Nimri Colony, Ashok Vihar, Phase-IV, Delhi-110052., DELHI, North West, Delhi, 110052

9811574507 techvisioncustomercell@gmail.com

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Terminals)	-	2000	-
9(PROVISION FOR EARTHING)	-	2000	-
10(Protection against accidental contact with live parts)	-	3000	-
11(Mositure Resistance and Insulation)	-	5000	-
12(Electric Strength)	-	3000	-
13(Fault conditions)	-	5000	-
15(Construction)	-	500	-
16(Creepage distance and clearances)	-	2000	-
17(Screws, current carrying parts and connections)	-	5000	-
18(Resistance to heat, fire and tracking)	-	3000	-
19(Resistance to corrosion)	-	5000	-
21(Heat management)	-	0	-

Complete

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Power adaptors

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	250	-
8.1.2(Protection against live parts in openings)	-	250	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	250	-
8.1.4(Protection against live parts against protective impedance)	-	250	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
11.1(General)	-	0	-
11.2(General)	-	2500	-
11.3(Heating)	-	2500	-
13.1(General)	-	200	-
13.2(Leakage current at operating temperature)	-	400	-
13.3(Electric Strength at operating temperature)	-	400	-
14(Transient Over Voltages)	-	3000	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2500	-
15.2(Spillage Test)	-	500	-
16.2(Leakage Current (after Clause 15))	-	900	-
15.3(Humidity Test)	-	2500	-
16.0(General)	-	0	-
16.1(General)	-	100	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	3000	-
18(Endurance Test requirements and tests)	-	500	-
19(Abnormal Operation)	-	5000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	2000	-
23(General)	-	2000	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	600	-
30.2(Glow Wire Test)	-	800	-
30.2(Needle Flame Test)	-	600	-
31(Resistance to Rusting)	-	2000	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	3000	-
18(Endurance)	-	500	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

Complete

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10500	-
5.2(Message Readability)	-	10500	-
5.1(Inputting of text)	-	10500	-
5.2(Message Readability)	-	10500	-

Complete

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

43875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	875	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	5000	-
9(MECHANICAL STRENGTH)	-	4000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	4000	-
12(Resistance to Flame and Ignition)	-	5000	-
13(Fault conditions)	-	5000	-
14(Creepage distance and clearances)	-	2000	-
4(General requirement and General test requirements)	-	500	-
8(Strength after humidity treatment)	-	3000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	750	-
Annex B(Lamps with operating position limitations)	-	500	-
15(Selection of lamps for tests (Sampling))	-	500	-
16(Condition of compliance)	-	100	-
17(Tests)	-	150	-

Complete

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	4000	-
9(Terminals)	-	5000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	6000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	1000	-
14(Fault conditions)	-	4000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	3000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	2000	-
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-

Complete

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	-
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	300	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2000	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	500	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	500	-
4.7(Resistance to fire)	-	1500	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	500	-
5.3(Abnormal operating and fault conditions)	-	500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	200	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	200	-
6.3(Protection of the telecommunication wiring system from overheating)	-	200	-
7.1(General)	-	200	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	200	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	200	-
7.4(Insulation between primary circuits and cable distribution systems)	-	200	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	200	-
2.10.5.6(Thin sheet materials)	-	500	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.12(Enclosed and sealed parts)	-	500	-
2.10.5.13(Winding wire)	-	500	-
3.1.4(Internal wire)	-	500	-
2.10.5.14(Additional insulation in wound components)	-	500	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	500	-
2.10.8.4(Abrasion resistance test)	-	500	-
2.10.9(Thermal Cycling)	-	500	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	-
3.2.4(Appliance inlet /connector)	-	200	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	200	-
4.2.8(Cathode Ray Tubes)	-	200	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	500	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	500	-
4.3.13.2(Ionizing radiation)	-	500	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	500	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	500	-
4.3.13.5(LED, laser class)	-	500	-
Annex A3(Hot flaming oil test)	-	0	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	500	-
Annex K(Thermal Control)	-	500	-
Annex Q(Voltage Dependent Resistors)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	500	-
Annex C(Transformers)	-	500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	-
Annex EE(Household and home/ office document/ media shredders)	-	500	-
4.6.2(Bottoms of fire enclosures)	-	500	-
2.6(Provisions for earthing and bonding)	-	500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	-
2.8(Safety interlocks)	-	500	-

Complete

Bureau of Indian Standards

The National Standards Body of India

TECHVISION TESTING LAB PRIVATE LIMITED

B-6 (3rd Floor, 2nd Floor & Basement), Commercial, Complex, Nimri Colony, Ashok Vihar, Phase-IV, Delhi-110052., DELHI, North West, Delhi, 110052

9811574507 techvisioncustomercell@gmail.com

Scope List