BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

Reset

298 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

271

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-
10 (Hydaulic pressure test)	-
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
11.1, Table 5. (Mass)	-
12.5 (Strightness)	-
14.1 (Visual inspection, Appearance and Workmanship)	-
14.2 (Visual inspection, Appearance and Workmanship)	-
14.3 (Visual inspection, Appearance and Workmanship)	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Length)	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Length)	-
8.1 (CE)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-
12.3.3 (Ovality)	-
11.1, Table 5. (Mass)	-
9.3 (Guided Bend Test (for SAW Pipes))	-
9.2.3 (Flattening Test for seamless pipes)	-
9.2.1 (Flattening test for ERW pipes )	-
9.1 (Tensile test-Yield Strength)	-
9.1 (Tensile test-Strength)	-
9.1 (Tensile test- Elongation)	-
18 (Marking)	-

-
Except Microalloying Elements

272

IS 281 (2009)

Mild steel sliding door bolts for use with padlocks - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (DIMENSIONS AND TOLERANCES-A)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-
8.1 (FINISH-Sliding Bolts, Plate Type)	-

-
Excluding micro alloying element

273

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Rs.3750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 11 (Workmanship)	-
Cl 11 (Workmanship)	-
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 11 (Workmanship)	-
Cl 13 (Workmanship)	-
6 AND AS PER IS 7887 (CARBON)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
7 & 8 (Ovality)	-
7 & 8 (Diameter)	-
9.2 (Wrapping Test)	-
9.3 (Bend test)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-
Clause 6 and Note 3 of IS 7887 (Copper)	-

-
Except micro alloying element for wire having diameter below 4 mm

274

IS 7142 (1995)

Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision)

Rs. 9552/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (VALVES AND VALVES PAD)	-
10.1 (FITTINGS OTHER THAN VALVES)	-
10.2 i) (FITTINGS OTHER THAN VALVES)	-
10.2 ii) (FITTINGS OTHER THAN VALVES)	-
10.2 vi) (FITTINGS OTHER THAN VALVES)	-
10.2 vii) (FITTINGS OTHER THAN VALVES)	-
13 (CHECKING OF WATER CAPACITY)	-
14.1.1 (PROOF TEST)	-
15.1 (PNEUMATIC LEAKAGE TEST)	-
16.1 ( Hydrostatic Stretch Test)	-
16.2 ( Bursting Test)	-
17.3 i) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 iv) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.4 (Bend test across weld)	-
17.4 (Bend test across weld)	-
17.6 (Minimum Thickness Test)	-

-
Excluding Bung (Cl 10.3), Hydrostatic Stretch Test (Cl 16.1) and Microalloying

275

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 Table-1 (Sizes Diameter of Line wire)	-
5 Table-1 (Sizes Diamater of Point wire)	-
5 Table-1 (Sizes Mass of Completed barbed wire)	-
5 Table-1 (Sizes Distance between two barbs)	-
12.1 (Tensile Strength)	-
12.1 (Breaking load)	-
12.3 (Ductility)	-
12.2.1 (Mass of zinc coating (line wire))	-
12.2.2 (Mass of zinc coating (point wire))	-
12.2 (Uniformity of zinc coating)	-
7.1 (Manufacture)	-
7.2 (Manufacture)	-
7.2 (Manufacture)	-
7.3 (Manufacture)	-
4 (Type A/Type B)	-
9.1 (Freedom from defects)	-
9.2 (Freedom from defects)	-
9.2 (Freedom from defects)	-
9.2 (Freedom from defects)	-
12.3 (Ductility)	-

-
Test facility is complete

276

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1 (UTM)	-
Cl 8.2 (Press)	-
Cl 13 (Weight)	-
Cl 14 (Length, Width & Thickness)	-
Cl 14 (Length, Width & Thickness)	-
Cl 12 (Workmanship)	-
Cl 10 (Galvanising Test)	-
5.1 (nitrogen)	-
5.1 (silicon )	-
5.1 (carbon)	-
5.1 (sulphur)	-
5.1 (manganese)	-
5.1 (phosphorus)	-
7.4 (Mass of Coating: Single Spot Test)	-
7.4 (Mass of Coating: Triple Spot Test)	-
Cl. 5.1 (Titanium)	-
Cl-5.1 (Aluminium)	-
Cl. 5.1 (Boron)	-
Cl. 5.1 (Niobium)	-
Cl. 5.1 (Vanadium)	-
Cl. 5.1 (Ti+Nb+V+B)	-

-
-

277

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.6 (Moisture)	-
5.6 (Total ash (on dry basis))	-
5.6 (Insolubility index)	-
5.6 (Titratable acidity (lactic acid))	-
5.6 (Milk fat)	-
4 (Description)	-
5.6 (Listeria monocytogenes)	-
5.6 (Spore count, Anaerobic (Sulfite reducing Clostridia))	-
5.6 (Spore count, Aerobic (Bacillus cereus))	-
5.6 (Salmonella)	-
5.6 (Coagulase positive Staphylococcus aureus)	-
5.6 (Escherichia coli)	-
5.6 (Coliform count )	-
5.6 (Bacterial count)	-
5.6 (Scorched particles)	-
5.6 (Milk protein in milk solids not fat)	-
Cl 5.4 (The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-

-
Testing Facility is complete

278

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

9300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1.1 (Dimensions)	-
Cl. 6 (Annealing Test)	-
Cl 6 (Resistance Test)	-
Cl 4.1.2 (Visual examination)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-
Cl.4.1 (Insulation )	-
Cl.4.2 (Application)	-
Cl.4.3 (Colour)	-
Cl.4.4 (Overall Diameter)	-
Cl.4.5 (Finish)	-
Cl.4.6 (High Voltage Test Water Immersion )	-

-
Test facility is complete

279

IS 1703 (2000)

Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) -

Rs. 4800/-and testing charges as per referred ISs View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - A)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- B)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - C)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - D)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - E)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- F)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- G)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - H)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - J)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- K)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - L)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- M)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - N)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - P)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- Q)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- R)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - A)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - B)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - C)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - D)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - E)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - F)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - G)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - H)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - J)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- K)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - A)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- B)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - C)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - D)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - E)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- F)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- G)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- H)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- J)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- K)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- L)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- M)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- N)	-
7.7.3 (Clearance diameter different between the lever and the arm at the joint)	-
7.7.7 (Piston Travel)	-
7.9.2 (Silencing Pipes and Anti-Siphonage Provision -Diameter ofthe hole)	-
8.1 (Hydraulic Test)	-
3 (CLASSIFICATION)	-
4 (NOMINAL SIZES)	-
6 (MANUFACTURE AND WORKMANSHIP)	-
7.2 and Fig.1 (CONSTRUCTION)	-

-
Except shut off and mechanical strength test, Facility for chemical testing is not available

280

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.1 Table-1 (Dimensional measurement of wires)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.1 (Stranding)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
11 (Packing and Marking)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-

-
Test facility is complete

281

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (i)Ultimate Tensile Strength,)	-
7.2 (ii) Reverse Torsion Test)	-
8 ( DIMENSIONS AND TOLERANCES)	-
6 (FREEDOM FROM DEFECTS)	-
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
-

282

IS 1610 (2018)

Household sewing machines - General requirements (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Driving arrangement Hand Operated Sewing Machine)	-
4.1 (Sewing Mechanism Design )	-
4.2 (Sewing Mechanism Reverse stitch mechanism )	-
4.2.1 (Sewing Mechanism Stitch Regulator)	-
4.3 (Sewing Mechanism Thread Tension)	-
4.4 (Sewing Mechanism Timing)	-
4.7 (Sewing Mechanism Thread Spool Pin)	-
6 (Lubrication)	-
8 (WORKMANSHIP AND FINISH)	-
8 (WORKMANSHIP AND FINISH)	-
8 (WORKMANSHIP AND FINISH)	-
10.1 IS 7491 (Accuracy Requirement Functional Dimension Feed Dog Measuring Condition - Feed dog raised to its highest position )	-
10.1 IS 7491 (Accuracy Requirement Functional Dimension Shuttle and shuttle driver Measuring Condition - Shuttle heel at bottom - most position)	-
10.1 IS 7491 (Accuracy Requirement Functional Dimension Presser foot Measuring Condition - Presser foot in lifted condition)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Needle bar Measuring Condition - Needle bar at lower-most condition)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Needle bar Measuring Condition - Needle bar at lower-most condition)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Difference between highest & lowest position of needle bar.)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Tip of pin at top most bottom most position of needle bar)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Difference between highest & lowest position of needle bar.)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Arm shaft Measuring Condition -At different fly wheel position (turn fly wheel by hand) axial push./pull to be given)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Flywheel Measuring Condition - Rotate flywheel to Radially measure eccentrity)	-
10.1 IS 7491 (Accuracy Requirement Assembly Clearance Feed section Measuring Condition - At its highest position above needle place)	-
10.2 IS 7492 (Sewing Requirement)	-
10.2 IS 7492 (Sewing Requirement)	-
10.2 IS 7492 (Sewing Requirement)	-
10.2 IS 7492 (Sewing Requirement)	-
10.2 IS 7492 (Sewing Requirement)	-
10.3 IS 7493 (Durability Requirement Needle bar Measuring Condition - Needle bar at lower-most condition)	-
10.1 IS 7491 (Accuracy Requirement Functional Dimension Shuttle and shuttle driver Measuring Condition - Shuttle heel at bottom - most position)	-
10.3 IS 7493 (Durability Requirement Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position)	-
10.3 IS 7493 (Durability Requirement Thread take up lever Measuring Condition - Thread take up lever at top and intermediate position)	-
10.3 IS 7493 (Durability Requirement Shuttle Measuring Condition - Tip of pin at top most bottom most position of needle bar)	-
10.3 IS 7493 (Accuracy Requirement Assembly Clearance Shuttle Measuring Condition - Difference between two indicator readings when needle bar is at its highest and lowest position)	-
10.3 IS 7493 (Durability requirement Arm shaft Measuring Condition -At different fly wheel position (turn fly wheel by hand) axial push./pull to be given)	-
10.3 IS 7493 (Durability Requirement Feed section Measuring Condition - At its highest position above needle place)	-
12 (Marking)	-
12 (Marking)	-
Clause 8.3 (Plating)	-

-
Mechanical- Complete, Chemical- Not Available

283

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

3550/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Tables 2 to 9 (3) (Length A)	-
5.1 Tables 2 to 9 (4) (Breadth B)	-
5.1 Tables 2 to 9 (4) (Breadth B1)	-
5.1 Tables 2 to 9 (4) (Breadth B2)	-
5.1 Tables 2 to 9 (5) (Thickness of Flap C)	-
5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D)	-
6.4.2 (X)	-
6.4.2 (Y)	-
6.4.2 (Z)	-
3 Tables 2 to 9 (Types)	-
5.1 Tables 2 to 9 (2) (Size of Hinge)	-
5.1 Tables 2 to 9 (7) (Number of Knuckles)	-
5.1 Tables 2 to 9 (8) (Number of Screw Holes)	-
5.1 Tables 2 to 9 (9) (Holes for Screw No.)	-
6.1 (General)	-
6.2.1 (Knuckles)	-
6.3 (Pins)	-
6.4 (Screw Holes)	-
6.4.2 (Position of Holes)	-
TABLE-1 (Clause-4) ( CARBON)	-
TABLE-1 (Clause-4) (SULPHUR)	-
TABLE-1 (Clause-4) (MANGANESE)	-
TABLE-1 (Clause-4) (PHOSPHURS)	-
Cl 4 & Table 1 (Silicon- IS 228(Part 2))	-
Clause 4 Table 1 (Nitrogen ( Flap))	-
TABLE-1 (Clause-4) (TITANIUM)	-
TABLE-1 (Clause-4) (VANADIUM)	-
TABLE-1 (Clause-4) (NIOBIUM)	-
TABLE-1 (Clause-4) (Molybdenum)	-
TABLE-1 (Clause-4) (Chromium)	-
TABLE-1 (Clause-4) (Nickel)	-
TABLE-1 (Clause-4) ( ALUMINIUM)	-
Clause 4 Table 1 (Manganese ( Pin))	-
Clause 4 Table 1 (Phosphorus ( Pin))	-
Clause 4 Table 1 (Sulphur ( Pin))	-
Clause 4 Table 1 (Carbon ( Pin))	-
Clause 4 Table 1 (Nitrogen ( Flap))	-
Clause 4 Table 1 (Manganese ( Flap))	-
Clause 4 Table 1 (Phosphorus ( Flap))	-
Clause 4 Table 1 (Sulphur ( Flap))	-
Clause 4 Table 1 (Carbon ( Flap))	-

-
Test facility is complete for mechanical Except Microalloying Elements

284

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-

-
Test facility is complete

285

IS 1328 (1996)

Veneered Decorative Plywood -Specification

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 (Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-
7.2.1 (Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-
7.2.2 (Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-
8 (Dimensions & Tolerances - Length - Cl. 8)	-
8 (Dimensions & Tolerances - Width - Cl. 8)	-
8 (Dimensions & Tolerances - Thickness - Cl. 8)	-
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-
8 (Dimensions & Tolerances - Squareness - Annexure C)	-
11 (Tests - Moisture Content - Part 1 of IS 1734)	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-
4.1 (Grade - For BWR)	-
4.1 (Grade - For MR)	-
4.2 (Type - For Type 1)	-
4.2 (Type - For Type 2)	-
7.1.2 (Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-
7.2.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-
9 (Finish - Cl. 9.1, 8.3)	-
9 (Finish - Cl. 9.2, 8.3)	-

-
Test facility is complete

286

IS 13095 (1991)

Butterfly valves for general purposes

Rs3300/-t View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (VALVE END CONNECTIONS)	-
5 (SERVICE APPLICATIONS)	-
6 ( NOMINAL SIZES )	-
7 (NOMINAL PRESSURES)	-
7.2 (Class designations)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-
9.1.1 ( Double Flanged Body Ends)	-
9.2.2 (Wafer Body Ends)	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-
11 (Bodies)	-
12 (DISC AND SHAFT)	-
13 (SEATING AND LININGS)	-
14.2 (BEARINGS)	-
14.3 (BEARINGS)	-
16 (OPERATION)	-
17.1 (Performance Testing)	-
17.2 (Body Test)	-
17.3 (Seat Test)	-
17.4 (Disc Strength Test)	-

-
Except Microalloying Elements

287

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

Rs 26700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (MATERIALS : CONDUCTOR)	-
4.1.1 (INSULATION : General Purjose Insulaiion)	-
4.1.2 (INSULATION : Heat Resisting Insulation)	-
5.1 (MATERIALS : FILLER AND INNER SHEATH)	-
5.2 (MATERIALS : FILLER AND INNER SHEATH)	-
6.1 (MATERIALS : ARMGURING)	-
6.2 (MATERIALS : ARMGURING)	-
7.1.1 (OUTER SHEATH : For Cables with General Purpose InsuIafion)	-
7.1.2 (OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-
8.1 (CONSTRUCTION : CONDUCTOR)	-
8.2 (CONSTRUCTION : CONDUCTOR)	-
9.1 (INSULATION )	-
9.2 (INSULATION : Thickness of Insulation)	-
9.3 (INSULATION :Tolerance on Thickness of Insulation)	-
9.4 (INSULATION : Application of Insulation)	-
10.1 (CORE IDENTIFICATION)	-
10.2 (CORE IDENTIFICATION)	-
10.3 (CORE IDENTIFICATION)	-
10.3.1 (Arrangement of Marking)	-
11.1 (LAYING UP OF CORES)	-
11.2 (LAYING UP OF CORES)	-
12.1 (INNER SHEATH)	-
12.2 (INNER SHEATH)	-
12.3 (INNER SHEATH :Thickness of Inner Sheath)	-
12.3.1 (INNER SHEATH :Thickness of Inner Sheath)	-
13.1.1 (ARMOURING : Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (ARMOURING : Direction of lay )	-
13.2 (ARMOURING : Type of Armour)	-
13.1.4 (ARMOURING : Application)	-
13.2.1 (ARMOURING : Type of Armour)	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (ARMOURING : Joints)	-
13.5.1 (ARMOURING : Resistance)	-
13.5.2 (ARMOURING : Resistance)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (OUTER SHEATH)	-
14.2 (OUTER SHEATH)	-
14.3 (OUTER SHEATH : Colour )	-
14.4.1 (Thickness of Outer Sheath : Unarmowed Cables)	-
14.4.2 (Thickness of Outer Sheath : Armoured Cables)	-
15.1 a) 1) (Tests on conductor : Annealing test ( for copper ))	-
15.1 a) 2) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) 2) (Tensile test (for aluminium) - After stranding )	-
15.1 a) 3) (Tests on conductor : Wrapping test ( for aluminium ))	-
15.1 a) 4) (Tests on conductor : Conductor resistance test)	-
15.1 a) 4) (Resistance test - Neutral conductor )	-
15.1 d)1) (Phyaical tests for insulation : Tensile Test)	-
15.1 d)1) (Phyaical tests for insulation : Elongation )	-
15.1 d)1) (Physical tests for sheath : Tensile stregth )	-
15.1 d)1) (Physical tests for sheath : Elongation )	-
15.1 d)2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
15.1 d)2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
15.1 d)2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d)2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 d)3) (Phyaical tests for insulation : Shrinkage )	-
15.1 d)3) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d)3) (Phyaical tests for Sheath : Shrinkage )	-
15.1 d)3) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 d)4) (Hot deformation : Insulation )	-
15.1 d)4) (Hot deformation : Sheath )	-
15.1 d)5) ( Loss of mass in air oven- Insulation )	-
15.1 d)5) ( Loss of mass in air oven- sheath )	-
15.1 d)5) ( Loss of mass in air oven- Insulation )	-
15.1 d)5) ( Loss of mass in air oven- sheath )	-
15.1 d)6) (Heat shock test- Insulation )	-
15.1 d)6) (Heat shock test- sheath )	-
15.1 d)7) (Thermal stability- insulation )	-
15.1 d)7) (Thermal stability- Sheath )	-
15.1 e) (Insulation resistance test : Volume Resistivity )	-
15.1 e) (Insulation resistance test : IR Constant )	-
15.1 f) (High voltage test ( water immersion test ))	-
15.1 g) (High voltage test at room temperature)	-
15.1 f) (High voltage test ( water immersion test ))	-
15.1 g) (High voltage test at room temperature)	-
15.1 g) (High voltage test at room temperature)	-
15.4 a) (Cold bend test- Insulation ( Optional test))	-
15.4 a) (Cold bend test- Sheath ( Optional test))	-
15.4 b) (Cold impact test- Insulation ( Optional test))	-
15.4 b) (Cold impact test- Sheath ( Optional test))	-
15.4 c) (Armour resistance test ( for other than mining cables ).- Optional test )	-
16.1 (DETAILS OF TESTS : General)	-
16.2 (DETAILS OF TESTS : High Voltage Test at Room Temperature)	-
16.3.1 (High Voltage Test ( Water Immersion Test ) : a.c. Test)	-
16.3.2 (High Voltage Test ( Water Immersion Test ) : d.c. Test)	-
16.4 (Flammability Test)	-
16.5 (Oxygen Index Test)	-
16.6 (Flame Retardance Test on Single Cables)	-
16.7 (Flame Retardance Test on Bunched Cables)	-
16.1 (Temperature Index)	-
16.5 (Oxygen Index Test)	-
16.1 (Temperature Index)	-
17.1 (IDENTIFICATION : Manufacturer’s Identification)	-
17.2 (IDENTIFICATION : Cable Identification)	-
17.2.1 (IDENTIFICATION : Cable Identification)	-
17.3 (IDENTIFICATION : Cable Code)	-
16.9 (Test for Halogen Acid Gas Evolution)	-

-
Test facility is complete

288

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Rs. 9200/- Excluding test on joints View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (SILICON)	-
7, 6.1.1 (NITROGEN)	-
7, 6.1.1 (ALUMINIUM)	-
Cl 10.1 (Manufacturing )	-
Cl 10.1.1 (Manufacturing )	-
Cl 12 (Workmanship)	-
Cl 15 (Workmanship)	-
Cl 10.1 (Manufacturing )	-
Cl 10.1.1 (Manufacturing )	-
Cl 12 (Workmanship)	-
Cl. 14.1 (Tensile Strength)	-
Cl. 14.1.1 (Elongation)	-
Cl. 14.2 (Bend Test (uto and including 50 mm NB))	-
Cl. 14.3 (Flattening test (Over 50 mm NB))	-
Cl. 8 Table 3,4 & 5 (Outside Diameter)	-
Cl. 8, 9 Table 3,4 & 5 (Thickness)	-
Cl. 6.5 (Height of Internal Fin)	-
Clause - 6.1.1, Table-1 (MANGANESE)	-
6.2 AND AS PER IS 10748 (MICRO ALLOY)	-
12 AND AS PER IS 4736 (UNIFORMITY OF ZINC COATING)	-
6.2 AND AS PER IS 10748 (COPPER)	-
12 AND AS PER IS 4736 (MASS OF ZINC COATING)	-

-
-

289

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

5725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (Workmanship)	-
Cl 8 (Workmanship)	-
Cl 9 (Workmanship)	-
Cl 13 (Workmanship)	-
Clause - 5.1, Table-3 ( CARBON)	-
Clause - 5.1, Table-3 (SULPHUR)	-
Clause - 5.1, Table-3 (SILICON)	-
Clause - 5.1, Table-3 (MANGANESE)	-
Clause - 5.1, Table-3 (PHOSPHURS)	-
Clause - 5.1, Table-3 (NITROGEN)	-
8 AND AS PER IS 4736 (MASS OF ZINC COATING)	-
8 AND AS PER IS 4736 (UNIFORMITY OF ZINC COATING)	-
Cl. 11.2 Table 2 (Yield strength)	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1 (Outer Diameter - SOP MT-23)	-
Cl. 6 , 6.2 Table 1 (Weight)	-
Cl. 6 , 6.2 Table 1 (Thickness)	-
Cl 11.3.1 (Flattening test (over 50 mm NB))	-
Cl. 11.2 Table 2 (Elongation)	-
Cl 11.3.1 (Cold bend test (upto & including 50 mm NB))	-
12 (Marking)	-
10 (Lengths)	-
Cl 11 (Tensile Test, Flattening Test & Cold Bend Test)	-
5 AND AS PER IS 10748 (MICRO ALLOY)	-

-
-

290

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

Rs.7800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Tensile Strength - IS 14329)	-
6.1 (Elongation - Is 14329)	-
7.2- Table 2 (Wall thickness of fittings - IS 1879)	-
7.5 - Table 2 (Projection of Rainforcement - IS 1879)	-
7.5 - Table 3 (Width of Rainforcement - IS 1879)	-
7.1 - Table 4 to Table 27 (a - IS 1879)	-
7.1 - Table 4 to Table 27 (b - IS 1879)	-
7.1 - Table 4 to Table 27 (c- IS 1879)	-
7.1 - Table 4 to Table 27 (d- IS 1879)	-
7.1 - Table 28 (d -IS 1879)	-
8.1 (Thread -IS 554)	-
8.2 (Alignment of threads -IS 554)	-
11 (Pressure Test)	-
5.1.1 (Type of Fittings - IS 1879)	-
5.1.2 (Size designation - IS 1879)	-
5.1.2.2 (Unequal fitting -IS 1879)	-
5.1.3 (Right and Left hand thread - IS 1879)	-
5.1.1 (Code Number -IS 1879)	-
10.iv) (Freedom from defects IS 4759)	-
12 (Compression Test)	-
10.iii) (Adhesion of Galvanized coating IS 2629)	-
10.i) (chem) (Mass of Galvanized coating)	-
10.ii) (chem) (Uniformity of Galvanized coating-IS 2633)	-
9 (Freedom from defects )	-
7.1 - Table 28 (D - IS 1879)	-
5.1.2.1 (Equal fitting - IS 1879)	-
10.i) (Mass of Galvanized coating)	-
10.ii) (chem) (Uniformity of Galvanized coating-IS 2633)	-

-
Test facility is complete

291

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

3700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Material)	-
4.1 (Dimensions and Tolerances)	-
4.2.2 (Handle)	-
4.2.1.1 (Dimensions and Tolerances )	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
5.3 (Hydraulic Pressure Test)	-
4.2.1 (Material)	-
4.2.1 (Material)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.3 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-

-
Chemical test facility available only for tin coating thickness as per IS 1327 and for Handle , elemental analysis as per IS 280.

292

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-

-
Test facility is complete

293

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Please check remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-
9.2.1 (Dimensional Changes caused by humidity - Delamination - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (Spot test - Annexure L)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (Spot test - Annexure L)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.6 (Spot test - Annexure L)	-
9.2.6 (mechanical) (Spot test - Annexure L)	-

-
Test facility is complete

294

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 11.3 (Press)	-
Cl 10.3 (UTM)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON)	-
Clause - 5, 8.1 & 8.2 (E250, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E250, SILICON)	-
Clause - 5, 8.1 & 8.2 (E250 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E250, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E250, NITROGEN)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E275, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E300, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E350, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E410, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E450, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E550, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E600, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E250, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E410, NITROGEN)	-
Clause - 5, 8.1 & 8.2 (E410, SILICON)	-
Clause - 5, 8.1 & 8.2 (E450 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E410, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E410, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON +EQUIVELENT )	-
Cl. 15 (Cl. 15 Square Bar: Out of Square)	-
Cl. 15 (Cl. 15 Square Bar: Side Width: Minimum)	-
Cl. 15 (Cl. 15 Square Bar: Side Width: Maximum)	-
Cl. 15, 16 (Thickness )	-
Cl. 15, 16 (Toe Radius R2)	-
15 (Radius R1)	-
Cl. 15, 16 (Leg Length Difference (Angle))	-
Cl. 15, 16 (Leg Length B (Angle))	-
Cl. 15, 16 (Leg Length A (Angle))	-
Cl. 15, 16 (Camber (Angle))	-
Cl 13 (Y Groove Cracking Test)	-
Clause 12 (Impact Test)	-
Cl. 15, 16 (Flange Slope)	-
Cl. 15, 16 (Web Thickness)	-
Cl. 15, 16 (Flange Thickness)	-
Cl. 15, 16 (Out of Square (Flat))	-
Cl. 15, 16 (Width )	-
Cl. 15, 16 (Thickness )	-
10 (Tensile Strength-IS:1608(P1)-22)	-
10 (Yield Stress-IS:1608(P1)-22)	-
10 (Elongation on SoA 5.65mm GL)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
-

295

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-3 i. (Fineness)	-
7 Table-3 i. (Fineness)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-

-
Test Facility is complete for Chemical. Test Facility is complete except Transverse Strength Test

296

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7.2 (Weight)	-
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 9.3 (Load In One Direction)	-
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 5 (Deformations and Surface Characteristics)	-
4.1 (Carbon %)	-
4.1 (Sulphur %)	-
4.1 (Silicon %)	-
4.1 (Manganese %)	-
4.1 (Phosphorus %)	-
4.1 ( Nitrogen%)	-
4.1 (Sulphur and phosphorous)	-
4.1 (CE)	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-

-
Except Pull out test, Microalloying Elements

297

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-

-
Test Facility is complete for Chemical Except Transverse Strength Test

298

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Annealing test (for copper))	-
4.1 (Tensile test (for Al)-Before Stranding)	-
4.1 (Tensile test (for Al)- After Stranding)	-
4.1 (Wrapping test (for Al))	-
4.2 (Conductor resistance test)	-
9 (Overall dimensions)	-
9.1 (Ovality)	-
Table 1 iii) c) 1) (Tensile strength (Without ageing))	-
Table 1 iii) c) 1) (Elongation (Without ageing))	-
Table 1 iii) c) 3) (Tensile strength (After ageing))	-
Table 1 iii) c) 3) (Elongation (After ageing))	-
Table 1 iii) d) 1) (Sheath -Tensile strength (Without ageing))	-
Table 1 iii) d) 1) (Sheath- Elongation (Without ageing))	-
Table 1 iii) d) 3) (Sheath- Tensile strength (After ageing))	-
Table 1 iii) d) 3) (Sheath- Elongation (After ageing))	-
Table 1 iii) c) 3) (Elongation (After ageing))	-
Table 1 iii) d) 3) (Sheath- Elongation (After ageing))	-
Table 1 iii) c) 2) (Loss of mass- Insulation )	-
Table 1 iii) d) 2) (Loss of mass- Sheath )	-
Table 1 iii) c) 7) (Thermal stability- Insulation )	-
Table 1 iii) d) 7) (Thermal stability- Sheath )	-
10.5 (Oxygen index)	-
10.7 (Temperature index)	-
10.5 (Oxygen index)	-
10.7 (Temperature index)	-
10.8 (Smoke density rating)	-
10.1 (HV (water immersion))	-
10.1 (HV (water immersion))	-
10.1 (HV (water immersion))	-
10.2 (HV (room temperature))	-
table 1 e) 3) (Volume Resistivity - Room temp )	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-
table 1 e) 3) (IR constant- Room temp )	-
table 1 e) 3) (IR constant- max. Temp)	-
10.4 (Flammability test-Burning after flame removal)	-
10.4 (Flammability test- Unaffected portion)	-
10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC))	-
5.3 (Thickness of Insulation)	-
8.3 (Thickness of Sheath)	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-
table 1 e) 3) (IR constant- Room temp )	-
table 1 e) 3) (IR constant- max. Temp)	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
10.6 (Halogen evolution)	-
Table 1 iii) c) 4) (Shrinkage-Insulation)	-
Table 1 iii) c) 4) (Cracks Observed)	-
Table 1 iii) d) 4) (Shrinkage- Sheath )	-
Table 1 iii) d) 4) (Cracks Observed)	-
Table 1 iii) c) 5) (Heat shock-Insulation )	-
Table 1 iii) d) 5) (Heat shock-Sheath )	-
Table 1 iii) c) 6) (Hot deformation - Indentation depth- Insulation)	-
Table 1 iii) d) 6) (Hot deformation -Indentation depth - Sheath )	-
(Cl.16.1) (Cl.19.1) (Conductor- Diameter )	-
10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC))	-
11 (Identification)	-
11.1 (Durability)	-
11.2 (Legibility)	-
13 (Cable code)	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
4.4 (Joints in Conductor)	-
4.4 (Joints in Conductor)	-
5.1 (Insulation)	-
6.1 (Filler)	-
6.2 (Filler)	-
7 (Binder Tape)	-
8.1 (Sheath Material )	-
12 (CONSTRUCTION Core Identification)	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3) (Assembly of cores )	-
(Cl.16.1) (Cl.19.1) (Conductor)	-
(Cl.16.1) (Cl.19.1) (Conductor)	-
(Cl.16.1) (Cl.19.1) (Conductor)	-
(Cl.6.1 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.3 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.3 of IS 8130:2013) (Stranded circular non compacted conductors (Class-2))	-
(Cl.6.1.3 of IS 8130:2013) (Stranded circular non compacted conductors (Class-2))	-
(Cl.6.1.3 of IS 8130:2013) (Stranded compacted circular conductors and shaped conductors (Class 2))	-
(Cl.6.1.3 of IS 8130:2013) (Stranded circular non compacted conductors(Class-2))	-
(Cl.6.1.3 of IS 8130:2013) ( Flexible Conductors (Classes 5))	-
(Cl.6.1.3 of IS 8130:2013) (Flexible Conductors (Classes 5))	-
5.2 (Application )	-
Table 1 iii) d) 3) (Sheath- TS variation)	-
Table 1 iii) d) 3) (Sheath- Elongation variation)	-
Table 1 iii) c) 3) (TS variation)	-
Table 1 iii) c) 3) (Elongation variation)	-

-
Test Facility is complete

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List