BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrolsample@bis.gov.in

Scope List

Reset

302 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Appearance)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xix) (Phenolic compounds (as C6H5OH))	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
Cl-5.3, Table-2 (xxi) (Anionic surface active agents)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (iv) (Cyanide (as CN))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/i (O,P-DDD)	-
5.4/Annex D/i (P,P-DDE)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/i (P,P-DDD)	-
5.4/Annex D/ii (Lindane)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/iv (a-Endosulfan)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/ix (2,4 –D)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xvi (Aldrin)	-
5.4/Annex D/xvi (Dieldrin)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.9 (V.parahaemolyticus)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-

-
Microbiological parameter is complete. Cyanide and RARs not available

IS 13688 (2020)

Packaged Pasteurized Milk — Specification ( Second Revision )

ALL TYPE

Rs 12,939.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (i), IS 5887 (Part 3) (Salmonella, m)	-
Table 2 (ii), IS 14988 (Part 2) (Listeria monocytogenes, m)	-
Table 2 (iii), IS 5402 (Aerobic plate count, m)	-
Table 2 (iv),IS 5401 (Part 1) (Coliform count, m)	-

-
MICROBIOLOGICAL TESTING COMPLETE

IS 10484 (2021)

Paneer - Specification

ALL TYPE

₹ 19,890.00/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 Clause 5.6 (i) (Aerobic plate count-Doc No.FAD 15 (02815) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (ii) (Coliform count- IS 5401 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (iii) (Staphylococcuus aureus- ( coagulase positive) IS 5887 (Part 2) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (iv) (Yeast & mould- IS 5403 (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (v) (Escherichia Coli- IS 5887 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (vi) (Salmonella sp.- IS 5887 (Part 3) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 Clause 5.6 (vii) (Listeria monocytogenes- IS 14988 (Part 1) (Requirement limit specified for m class based on 2- Class sampling plan))	-

-
MICROBIOLOGICAL TESTING COMPLETE

IS 9617 (2023)

DAHI ï¿½ SPECIFICATION (First Revision of IS 9617)

ALL TYPE

Rs. 19,600.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5 Table 3 (i) (Coliform count/IS 5401(P-1))	-
5.5 Table 3 (ii) (Staphylococcus aureus/IS 5887(P-8/Sec-1))	-
5.5 Table 3 (iii) (Yeast & mould count/IS 16069(P-1))	-
5.5 Table 3 (iv) (E.coli/IS 5887(P-1):1976)	-
5.5 Table 3 (v) (Salmonella sp./IS 5887(P-3/Sec-1))	-
5.5 Table 3 (iv) (Listeria monocytogenes/IS 14988(P-1))	-

-
MICROBIOLOGICAL TESTING COMPLETE

IS 4709 (2021)

Flavoured Milk - Specification

Pasteurized Flavoured Milk

₹ 12,789.00 /- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (Clause 8.3)(i) (Salmonella sp.- IS 5887(P-3) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 (Clause 8.3)(ii) (L.monocytogenes- IS 14988(P-1) (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 (Clause 8.3)(iii) (Aerobic plate count- IS 5402 (Requirement limit specified for m class based on 2- Class sampling plan))	-
Table 2 (Clause 8.3)(iv) (Coliform count- IS 5401(P-1) (Requirement limit specified for m class based on 2- Class sampling plan))	-

-
MICROBIOLOGICAL TESTING PARTAL

IS 14433 (2022)

INFANT MILK SUBSTITUTES - SPECIFICATION (Second Revision of IS 14433)

TYPE -1 AND TYPE -2

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.10,Table 3, Sl No i) (Aerobic plate count)	-
Clause 5.10,Table 3, ,Sl No iii) (Staphylococcus aureus)	-
Clause 5.10,Table 3, ,Sl No iv) (yeast and mould count)	-
Clause 5.10,Table 3, ,Sl No v) (Salmonella sp.)	-
Clause 5.10,Table 3, ,Sl No vi) (Listeria monocytogenes)	-
CL 5.10, Table 3 (vi) (Bacillus cereus)	-
Clause 5.10,Table 3, ,Sl No viii) (Sulphitr reducing clostridia)	-
Clause 5.10,Table 3, ,Sl No ix) (Enterobacteriaceae)	-
Clause 5.10,Table 3, ,Sl No x) (Enterobacter sakazakii ( Cronobacter sp.))	-

-
MICROBIOLOGICAL TESTING COMPLETE

IS 15757 (2022)

FOLLOW-UP FORMULA-COMPLEMENTARY FOODS - SPECIFICATION (First Revision of IS 15757)

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.8,Table 2 ,Sl No i) (Aerobic plate count)	-
Clause 4.8,Table 2 ,Sl No ii) (Coliform Count)	-
Clause 4.8,Table 2 ,Sl No iii) (Staphylococcus aureus( Coagulase positive))	-
Clause 4.8,Table 2 ,Sl No iv) (Yeast and mould count)	-
Clause 4.8,Table 2 ,Sl No v) (Salmonella sp.)	-
Clause 4.8,Table 2 ,Sl No vi) (Listeria moncytogenes)	-
Clause 4.8,Table 2 ,Sl No vii) (Bacillus cereus)	-
Clause 4.8,Table 2 ,Sl No viii) (Sulphite reducing clostridia)	-
Clause 4.8,Table 2 ,Sl No ix) (Escherichia coli)	-

-
Microbiological testing Complete

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Gross capacity)	-
4.2 (Body Capacity)	-
6 (Construction)	-
7 (Workmanship and Finish )	-
8.1 (Air Pressure Test )	-
8.2 (Proof Pressure Test )	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.3 (Operating Test for Pressure Regulating Device )	-
8.4 (Test for Safety Relief Device )	-
8.5 (Bursting Pressure Test )	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-

-
-

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause - 7.1 (CARBON)	-
Clause - 7.1 (SULPHUR)	-
Clause - 7.1 (PHOSPHURS)	-
Clause - 7.1 (MANGANESE)	-
Clause - 7.1 (NITROGEN)	-
Clause.7.1 (Carbon Equbalant)	-
Clause.7.1 (Silicon)	-
Clause.7.1 (Microalloy element)	-

-
except optional tests

IS 9537 : Part 8 (2003)

Conduits for electrical installations - Specification: Part 8 rigid non - Threadable conduits of aluminium alloy

2550/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 7 (Testing Dimensions)	-
Clause No. 7 (Testing Dimensions)	-
Clause No. 8 (construction)	-
clause No. 9.3 (Compression Test)	-

-
Complete facility available

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-
Cl.8.1 (Dimensions -width)	-
Cl-5.2, Table-2 (Maximum Number of Categories of Permissible Defects, per m2)	-
Cl-8.3 (Edge Straightness)	-

-
Excluding Steady State Formaldehyde Emission Test (Cl. 11.7)

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

Rs.3600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 & 4.2,Table 1,sl.no-i (Sb)	-
Cl-4.1 & 4.2,Table 1,sl.no-ii (As)	-
Cl-4.1 & 4.2,Table 1,sl.no-iii (Ba)	-
Cl-4.1 & 4.2,Table 1,sl.no-iv (Cd)	-
Cl-4.1 & 4.2,Table 1,sl.no-v (Cr)	-
Cl-4.1 & 4.2,Table 1,sl.no-vi (Pb)	-
Cl-4.1 & 4.2,Table 1,sl.no-vii (Hg)	-
Cl-4.1 & 4.2,Table 1,sl.no-viii (Se)	-

-
Complete.

IS 14616 (1999)

Laminated veneer lumber specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimensions)	-
6.2 (Dimensions)	-

-
Test facility is complete

IS 10258 : Part 1 (2022)

Sterile hypodermic syringes for single use Part 1: Syringes for manual use Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Extraneous matter)	-
9.1 (Scale)	-
9.2 (Numbering of scales)	-
9.3 (Overall length of scale to nominal capacity line)	-
9.4 (Position of scale)	-
7 (Lubricant testing)	-
Cl. 6.3 (Difference in content of Distilled water(Pb, Sn, Zn & Fe), mg/kg, Max)	-
Cl. 6.3 (Cadmium, mg/kg, Max)	-
6.2 (Limits of acidity or alkalinity, unit)	-

-
Excluding Lubricant testing

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Variation in thickness)	-
11.1 (Dimensions - Squareness)	-
4 (GRADE)	-
4 (TYPE)	-
5 (SIZES)	-
Clause 6.2.1 (Plywood)	-
Clause 6.2.2 (Decorative plywood)	-
11.2 (General Flatness Test)	-
11.2 (General Flatness Test)	-
11.2 (General Flatness Test)	-
11.3 (Local Planeness Test)	-
11.4 (Impact Indentation Test)	-
11.4 (Impact Indentation Test)	-
11.5 (Flexure Test)	-
11.5 (Flexure Test)	-
11.6 (Edge Loading Test)	-
11.6 (Edge Loading Test)	-
11.6 (Edge Loading Test)	-
11.7.1 (Shock Resistance Test)	-
11.7.2 (Shock Resistance Test)	-
11.8 (Buckling Test)	-
11.8 (Buckling Test)	-
11.8 (Buckling Test)	-
11.9.2 (Slamming Test)	-
11.9.3 (Slamming Test)	-
11.10 (Misuse Test)	-
11.11 (Varying Humidity Test)	-
11.11 (Varying Humidity Test)	-
11.12 (End Immersion Test)	-
11.13 (Knife Test)	-
11.14 (Glue Adhesion Test)	-
11.15 (Screw Withdrawal Resistance Test)	-
11.15 (Screw Withdrawal Resistance Test)	-
Clause 11.11 (Varying Humidity Test)	-
11.11 (Varying Humidity Test)	-

-
Test facility is complete

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

Aluminium Conductor

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-

-
Excluding Except CI. 16.9 Ultimate tensile test, Cl. 16.10 DC resistance test and CI.16.11 Stress Strain Test

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (VALVE END CONNECTIONS)	-
5.0 (SERVICE APPLICATIONS)	-
6.0 ( NOMINAL SIZES )	-
7.0 (NOMINAL PRESSURES)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-
9.1.1 ( Double Flanged Body Ends)	-
9.2.2 (Wafer Body Ends)	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-
13.0 (SEATING AND LININGS)	-
14.0 (BEARINGS)	-
14.2 (BEARINGS)	-
14.3 (BEARINGS)	-
16.0 (OPERATION)	-
17.1 (Performance Testing)	-
17.2 (Body Test)	-
17.3 (Seat Test)	-
17.4 (Disc Strength Test)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-

-
Chemical tests not available

IS 1658 (2006)

Fibre hardboards - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-1 (Dimensions and tolerances in accordance with Annex A&B)	-
6 (Workability and finish)	-

-
Test facility is complete

IS 3099 : Part 1 AND 2 (1992)

Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision)

Rs.1200/- , Rs1800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Dimensions Thickness)	-

-
Excluding Optical Properties

IS 4123 (1982)

Specification for chain pipe wrenches (First Revision)

Rs 2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Table 1 (Dimensions- Nominal Size)	-
3 Table 1 (Dimensions- Capacity, D min)	-

-
Mechanical: Test facility is complete, Chemical: Material testing for carbon steel available only

IS 11279 (1985)

Specification for braille slate

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Shape -and Dimensions Fig1,2,3)	-

-
Mechanical: Test facility is complete, Chemical: Finish -Anodic coating as per IS 1868 not available

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1&3 (Marking)	-
3 (Class of Accuracy)	-
4.1 (Nominal capacities)	-
5.1 (Material)	-
5.1 (Material)	-
5.3 (Workmanship & Finish)	-
5.4 (i) Distance of graduation line from top of pipette.)	-
5.4 (ii) Distance from graduation line to top of bulb(pattern 2))	-
5.4 (iii)Distance from graduation line to tip of jet (Pattern 1))	-
5.4 (iv) Wall thickness)	-
5.4 (a) pattern 2 pipette of 1 and 2ml )	-
5.4 (b) Other pipettes)	-
5.4 (v) Dia. of safety bulb (if provided ))	-
5.4 (vi)Distance from top of pipette to bottom of safety bulb )	-
5.4 (vii) Overall length, L)	-
5.4 (viii) Length of suction tube, L1 )	-
5.4 (ix) Length of delivery tube, L2 )	-
5.4 (x) Internal dia. of suction tube D1 )	-
5.4 (xi) External dia. of bulb D2 )	-
5.4 (xii) External dia. of delivery tube D3 )	-
5.5 (Delivery Time)	-
5.6&7 (Graduation line & Visibility )	-

-
Excluding Accuracy test

IS 1381 : Part 2 (2019)

Laboratory glassware - Boiling flasks: Part 2 boiling flasks with conical ground joints (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Type)	-
4 (Series of capacities)	-
6 (Dimensions)	-
6 (Dimensions)	-
6 (Dimensions)	-
6 (Dimensions)	-
7 (Ground glass joints)	-
9 (Marking)	-
9 (Marking)	-
9 (Marking)	-
9 (Marking)	-
5 (Material)	-

-
Excluding Thermal shock endurance, Material tests

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

Rs.3000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3, 4 (Type of Flask)	-
3.1, 4.1 (Series of Nominal Capacity)	-
3.2, 4.2 (Nominal Capacity )	-
3.4, 3.4.1 & 4.4, 4.4.1 (Construction- a) Stability )	-
3.4, 3.4.2 & 4.4, 4.4.2 (Construction- b) Neck )	-
3.5, 4.5 (Dimensions (in mm) (Table 1&2))	-
3.5.2 (Neck Length)	-
3.5.3, 4.5.2 (Dimensions of base )	-
3.5.4, 4.5.3 (Wall thickness)	-
5 (Marking )	-

-
Excluding cl 3.5.3 dimension of base for conical flask of 5000 ml, material test

IS 458 (2021)

Precast Concrete Pipes (with and without Reinforcement) -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1.1 ((vi) Compressive strength,)	-

-
Product certification scheme is being operated on FT basis. Excluding three edge load and HST, Split tesnsile and compressive strength upto 1000KN load-

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

Mineral filled sheathed heating element

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Cl. 6 IS 4159:2021" (Classification)	-
"Cl. 8 IS 4159:2021" (Protection against access to live parts)	-
"Cl. 10 IS 4159:2021" (Power Input and Current)	-
"Cl. 11 IS 4159:2021" (Heating)	-
"Cl. 13 IS 4159:2021" (Leakage Current & Electrical Strength at Operating Temperature)	-
"Cl. 15 IS 4159:2021" (Moisture Resistance)	-
"Cl. 16 IS 4159:2021" (Leakage Current and Electric strength)	-
"Cl. 18 IS 4159:2021" (Endurance)	-
"Cl. 19 IS 4159:2021" (Abnormal Operation)	-
"Cl. 20 IS 4159:2021" (Stability and mechanical Hazards)	-
"Cl. 21 IS 4159:2021" (Mechanical Strength)	-
"Cl. 22 IS 4159:2021" (Construction)	-
"Cl. 23 IS 4159:2021" (Internal Wiring)	-
"Cl. 24 IS 4159:2021" (Components)	-
"Cl. 25 IS 4159:2021" (Supply Connections and External Flexible Cables and Cords)	-
"Cl. 26 IS 4159:2021" (Terminal For External Conductors)	-
"Cl. 27 IS 4159:2021" (Provision For Earthing)	-
"Cl. 28 IS 4159:2021" (Screws and Connections)	-
"Cl. 29 IS 4159:2021" (Creepage Distances, Clearances And Distances Through Insulation)	-
"Cl. 30 IS 4159:2021" (Resistance To Heat, Fire And Tracking)	-
"Cl. 31 IS 4159:2021" (Resistance To Rusting)	-
"Cl. 102 IS 4159:2021" (Leakage and hydrostatic strength (for oil heating elements))	-
Cl.22.106 (CONSTRUCTION)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.7.2 of IS 4159:2021 (Marking)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.11.2 of IS 4159:2021 (Heating)	-
Cl.11.101 of IS 4159:2021 (Heating)	-
"Cl. 18 IS 4159:2021" (Endurance)	-
Cl.19.2 of IS 302-1: 2008 (Abnormal Operation)	-
Cl.19.3 of IS 302-1: 2008 (Abnormal Operation)	-
Cl.19.13 IS 302-1: 2008 (Abnormal Operation)	-
Cl.19.13 IS 302-1: 2008 (Abnormal Operation)	-
Cl.19.13 IS 302-1: 2008 (Abnormal Operation)	-
Cl.22.101 of IS 4159:2021 (Construction)	-
Cl.22.102 of IS 4159:2021 (Construction)	-
Cl.22.103 of IS 4159:2021 (Construction)	-
Cl.22.104 of IS 4159:2021 (Construction)	-
Cl.22.105 of IS 4159:2021 (Construction)	-
Cl.22.106 of IS 4159:2021 (Construction)	-
Cl.22.107 of IS 4159:2021 (Construction)	-
Cl.22.108 of IS 4159:2021 (Construction)	-
Cl.22.109 of IS 4159:2021 (Construction)	-
Cl.22.110 of IS 4159:2021 (Construction)	-
Cl.22.111 of IS 4159:2021 (Construction)	-
Cl.27 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.28.1 & IS 302-1: 2008 (Screws & Connection)	-
Cl.28.4 IS 302-1: 2008 (Screws & Connection)	-
Cl. 29.1 & IS 302-1: 2008 (Creepage Distances & Clearances)	-
Cl. 29.2 & IS 302-1: 2009 (Creepage Distances & Clearances)	-
Cl.7.1 of IS 4159:2021 (Marking)	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008 (Heating)	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008 (Heating)	-
Cl.18 of IS 4159:2021 (Endurance Test)	-

-
Excluding water heating element rating above 3 kW and Except oil heaters

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries â€” Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Excluding HST, Impact test, Microalloying Elements

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
15.2 (Rating)	-
18.3 (BIS Certification Marking )	-
8.0 (Earthing)	-
9.0 (Terminal Marking)	-
11.0 (DUTY AND RATING)	-
18.3 (Marking)	-
16.2.1 (Dimensions)	-
16.1.1 (Insulation Resistance Test)	-
16.1.2 (Measurement of Resistance of Windings of Stator)	-
16.1.3 (No Load Test)	-
16.1.4 (Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-
16.1.5 (5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-
16.1.6 (High Voltage Test)	-
16.2.2 (Locked Rotor Test)	-
16.2.2.3 (Determination of starting characteristics -locked rotor current)	-
16.2.2.3.1 (Direct proportion method)	-
16.2.3 (Full Load Test to Determine Efficiency, Power Factor and Slip)	-
16.2.4 (Temperature Rise Test)	-
16.2.5 (Momentary Overload Test)	-

-
Excluding For rating above 1 kW and optional test for all rating

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries — Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Excluding HST, Impact test, Microalloying Elements

IS 3480 (1966)

Specification for flexible steel conduits for electrical wiring

size- 6.5 mm,10 mm,16 mm ,25 mm,40mm

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Construction and workmanship, IS 3480)	-
4.2 (Construction and workmanship, IS 3480)	-
4.3 (Construction and workmanship, IS 3480)	-
5.1 (Dimensions, IS 3480)	-
5.1 (Dimensions, IS 3480)	-
5.1 (Dimensions, IS 3480)	-
6.2 (Flexibility, IS 3480)	-
7.1 (Marking, IS 3480)	-
7.1 (Marking, IS 3480)	-
7.1 (Marking, IS 3480)	-
7.1.1 (Marking, IS 3480)	-
8.4 (Linear Breaking Test, IS 3480)	-
8.5 (Test for Flexibility, IS 3480)	-
8.6 (Bend Fracture Test, IS 3480)	-
8.7 (Crushing Test, IS 3480)	-

-
Test facility is complete

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrolsample@bis.gov.in

Scope List

No Record Found

No Record Found