BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

Reset

259 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Cu, Ni, Cr

IS 8917 (1978)

Specification for steel plates for galvanizing pots

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon)	-

-
Excluding Silicon

IS 8748 (1978)

Specification for forged/rolled CTC segments

Rs.1050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.1, Table 1 (Chromium)	-
Clause 3.1, Table 1 (Nickel )	-
Clause 3.1, Table 1 (Phosphorous)	-
Clause 3.1, Table 1 (Sulphur, Max)	-
Clause 3.1, Table 1 (Manganese)	-
Clause 3.1, Table 1 (Silicon, Max)	-
Clause 3.1, Table 1 (Carbon)	-

-
Excluding Ni, Cr

IS 8564 (1977)

Specification for steel wire for nipples for spokes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Tellurium )	-
Clause 5.1 (Lead)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Carbon)	-

-
Excluding Pb, Te

IS 4430 (1979)

Specification for mould steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Silicon)	-
Cl. 6 (Manganese)	-
Cl. 6 (Nickel)	-
Cl. 6 (Chromium)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Vanadium)	-
Cl. 6 (Tungsten)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Copper)	-
Cl. 6 (Cobalt)	-

-
Excluding Cr, Ni, Mo, Cu and V

IS 4431 (1978)

Specification for carbon and carbon manganese free cutting steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Silicon)	-
Cl. 6 (Manganese)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Chromium)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Nickel)	-
Cl. 6 (Copper)	-
Cl. 6 (Vanadium)	-

-
Excluding Cr, Ni, Mo, Cu and V

IS 4882 (1979)

Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1,5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Grain Size, Al

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

525 for Physical + carbide density test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

-
Excluding Cr

IS 9442 (1980)

Specification for hot-rolled steel plates, sheets and strips for manufacture of agricultural tillage discs

Rs 1425/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Carbon)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Phosphorous)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon)	-

-
Excluding Grain Size, Decaruburization

IS 9485 (1980)

Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 1.1, 5.1-5.2 (Carbon)	-
Cl. 1.1, 5.1-5.2 (Manganese)	-
Cl. 1.1, 5.1-5.2 (Sulphur)	-
Cl. 1.1, 5.1-5.2 (Phosphorus)	-
Cl. 1.1, 5.1-5.2 (Sulphur + Phosphorus)	-
Cl. 1.1, 5.1-5.2 (Titanium)	-
Cl. 1.1, 5.1-5.2 (columbium/Niobium)	-
Cl. 1.1, 5.1-5.2 (Nitrogen)	-

-
Excluding Cupping test, Microalloying Elements

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-

-
Excluding Ni,Cu, Mo,V

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Cr, Mo,Ni

IS 9962 (1981)

Specification for steel wire for needles

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Coating Test (Clause 10) Additional remark - 'uncoated' sample is required for chemical testing. Decarburization

IS 5489 (1975)

Specification for carburizing steels for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1 & 4.2 Table 1 (Carbon- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Sulphur- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Manganese- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Phosphorous- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Silicon- Relevant parts of IS 228 )	-

-
Excluding Cr, Ni, Mo, Cu, V

IS 3450 (1994)

Carbon papers - Handwriting - Specification (Second Revision)

3172.00 View breakup
Rs. 3172/- (only for description, substance & coating and keeping quality).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.2 (Base Paper)	-
5.3 (Size)	-
5.4 (Carbon work)	-
5.3 (Resistance to curling)	-
Table- 1(i) (Substance of the)	-
Table- 1(ii) (Coating)	-
Table- 1(iii) (Durability)	-
Table- 1(iv) (Manifolding)	-
6 (Keeping quality)	-
Cl. 5.6 Table no 4 (Manifolding)	-
Cl. 5.6 Table no 3 (Durability)	-
Cl. 5.6 Table no 2 (Coating )	-
Cl. 5.6 Table no 1 (Substance of base paper)	-
Cl. 5.5 (Resistance.of Curling )	-
Cl. 5.4 (Carbon Work)	-
5.2 (Base Paper)	-

-
Excluding Durability and manifolding

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11 (Markings )	-
5.1 (Class of Accuracy)	-
5.2 (Types)	-
8 (Construction)	-
Table 2 (i) Scale length )	-
Table 3 ( ii) Overall length )	-
Table 4 (iii) Distance of Zero line from top of burette )	-
Table 5 (iv) Distance of lowest graduation line from the top of stopcock )	-
Table 6 (v) Length of tube of uniform bore below graduation line )	-
Table 7 (vi) Distance of end of jet from underside of stopcock )	-
8.2 ( c) Top of burette )	-
8.3 (d) Stopcock and similar devices)	-
8.4 (e) Stop Cock Leakage)	-
8.5 ( f) Delivery jet)	-
8.6 (g) Delivery time )	-
8.6 (g) Delivery time )	-
9 (Graduations, figuring and patterns )	-
9.1 (a) Graduations patterns )	-
9.2 (Position of graduation line)	-
9.3 (c) Marking of graduation lines )	-
12 (. Visibility of graduation line)	-

-
Excluding Material and Accuracy test not available,

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

16,189 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.35.3 - 5.39 (Jaw entrapment in handles and steering wheels-jaw entrapment test)	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-
4.18.4.3 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-
4.4.1 - 5.2 (Small parts-For children under 36 months)	-
4.4.2 - 5.2 (Small parts-For children 36 months and over but under 72 months )	-
4.5.1.2 - 5.3 (Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-
4.5.1.4 - 5.3 (Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-
4.5.4 - 5.6 (Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-
4.5.2 - 5.4 (Shape, size and strength of certain toys-Small balls-Small balls test)	-
4.5.3 - 5.5 (Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-
4.11.4(a) - 5.11.4.2 (Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-
9873 (Part - 3) 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9)	-
9873 (Part - 3) 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9)	-
9873 (Part - 9) 3 (Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-
9873 (Part - 9) 3 (Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-
9874 (Part - 4) 4.7.3.1 (Swings intended for children under 36 months)	-
9874 (Part - 4) 4.8 (Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-

-
Test facility is complete, except phthalates.

IS 4432 (1988)

Specification for case hardening steels (First Revision)

Please see remarks. View breakup
Rs 11660/- excluding Grain size, Cleanliness of steel and additional tests For elements other than Table-1: Rs 1004/- per element

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (NITROGEN)	-

-
Excluding Cr, Ni, Mo, Cu and V

IS 4409 (1973)

Specification for ferronickel (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4, Table 1 (C)	-
Cl.4, Table 1 (Si)	-
Cl.4, Table 1 (Mn)	-
Cl.4, Table 1 (P)	-
Cl.4, Table 1 (S)	-

-
Chemical tests not available

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

4126 View breakup
Rs. 4126/- excluding copper content and pesticide residues

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture content)	-
3.4 Table 1 (Total ash)	-
3.4 Table 1 (Caffeine content)	-
3.1 (Description )	-
3.4 Table 1 (Solubility in boiling)	-
3.4 Table 1 (Solubility in cold water)	-

-
Caffeine content, Cu

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-

-
Excluding Microalloying elements and proof stress

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

- View breakup
Rs 1650/- For Castings: Gr LTB1, LTB2, LTB3, LTB5

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (SIZE AND SHAPE)	-
6 (FREEDOM FROM DEFECTS)	-
4, Table 2. (MECHANICAL PROPERTIES)	-
7.2 (Dimension)	-
7.1 (Mass)	-
6.2 (Freedom from defects-Castings)	-
6.1 (Freedom from defects-Ingots)	-
4.1, Table 2 (Elongation)	-
4.1, Table 2 (Tensile strength)	-

-
Excluding Proof test, Microalloying elements

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

Total charges = Rs.5850.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (chem) (MATERIAL)	-
4.1 (chem) (Workmanship and Finish)	-
4.2 (chem) (Design, Shape & Dimension)	-
4.2 (chem) (a) Peelability)	-
4.3 (chem) (Workmanship, Finish & Appearance)	-
4.4 (chem) (Brimful capacity)	-
4.5 (chem) (a) Wall Thickness, mm Top)	-
4.5 (chem) ((b) Wall Thickness, mm Middle)	-
4.6.3 (chem) (Leakage Test a) Closures leakage test)	-
4.6.3 (chem) (b) Vibration leakage test)	-
4.6.4 (chem) (Drop Test)	-
4.6.5.1.a (Colour migration Test (Container))	-
4.6.5.1.b (Colour migration Test (Cap))	-
4.6.5 (chem) (c. Colour Migration (Cap))	-
4.6.6.a (chem) (Water Potability Test (a) Odour)	-
4.6.6.b (chem) (Water Potability Test (b) Taste)	-
4.5 (chem) ((c) Wall Thickness, mm Bottom)	-
4.6.3 (chem) (c) Air pressure leakage test)	-
4.6.2 (chem) (Transparency,)	-
Cl. 4.6.5 (chem) (Cl. 4.6.5 Overall migration (Caps))	-
4.6.5.1 (chem) (Colour migration (Container))	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i) (Barium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii) (Cobalt)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii) (Copper)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv) (Iron)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v) (Lithium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi) (Manganese)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii) (Zinc)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii) (Antimony)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix) (Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-

-
-

IS 10500 (2012)

Drinking water - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4. SL No.i)of Table I (Colour)	-
4.SL No.ii) of Table I (Odour)	-
4.SL No.iii)of Table I (pH)	-
4.SL No.v)of Table I (Turbidity, NTU, Max)	-
4.SL No.vi)of Table I (Total dissolved solids, mg/l, max)	-
table 2 sl.no 1 ( Aluminium (as Al), mg/l, Max)	-
table 2 sl.no 2 (Ammonia (as total ammonia-N), mg/l, Max)	-
table 2 sl.no 3 (Anionic detergents (as MBAS), mg/l, Max)	-
table 2 sl.no 4 (Barium (as Ba), mg/l, Max)	-
table 2 sl.no 5 (Boron (as B), mg/l, Max)	-
table 2 sl.no 6 (Calcium (as Ca), mg/l, Max)	-
table 2 sl.no 9 (Copper (as Cu), mg/l, Max)	-
table 2 sl.no 10 ( Fluoride (as F) mg/l, Max)	-
table 2 sl.no 11 (Free residual chlorine, mg/l, Min)	-
table 2 sl.no 12 (Iron (as Fe), mg/l, Max)	-
table 2 sl.no 13 (Magnesium (as Mg), mg/l, Max)	-
table 2 sl.no 14 (Manganese (as Mn), mg/l, Max)	-
table 2 sl.no 15 (Mineral oil, mg/l, Max)	-
table 2 sl.no 16 (Nitrate (as NO3), mg/l, Max)	-
table 2 sl.no 17 (Phenolic compounds (as C6H5OH), mg/l, Max)	-
table 2 sl.no 18 (Selenium (as Se), mg/l, Ma)	-
table 2 sl.no 19 (Silver (as Ag), mg/l, Max)	-
table 2 sl.no 20 (Sulphate (as SO4) mg/l, Max)	-
table 2 sl.no 21 (Sulphide (as H2S), mg/l, Max)	-
table 2 sl.no 22 (Total alkalinity as calcium carbonate, mg/l, Max)	-
table 2 sl.no 23 (Total hardness (as CaCO3 mg/l, Max)	-
table 2 sl.no 24 (Zinc (as Zn), mg/l, Max)	-
TABLE 3 sl no 1 (Cadmium (as Cd), mg/l, Max)	-
TABLE 3 sl no 3 (Lead (as Pb), mg/l, Max)	-
TABLE 3 sl no 4 (Mercury (as Hg), mg/l, Max)	-
TABLE 3 sl no 5 ( Molybdenum (as Mo), mg/l, Max)	-
TABLE 3 sl no 6 (Nickel (as Ni), mg/l, Max)	-
TABLE 3 sl no 7 (Pesticides, µg/l, Max)	-
TABLE 3 sl no 8 (Polychlorinated biphenyls, mg/l,)	-
TABLE 3 sl no 9 (Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-
TABLE 3 sl no 10 (Total arsenic (as As), mg/l, Max)	-
TABLE 3 sl no 11 (Total chromium (as Cr), mg/l, Max)	-
TABLE 5 sl no 1 (Alachlor)	-
TABLE 5 sl no 3 (Atrazine)	-
TABLE 5 sl no 4 ( Alpha HCH)	-
TABLE 5 sl no 5 (Beta HCH)	-
TABLE 5 sl no 6 (Butachlor)	-
TABLE 5 sl no 7 (Chlorpyriphos)	-
TABLE 5 sl no 8 (Delta HCH)	-
TABLE 5 sl no 9 (2,4- Dichlorophenoxyacetic acid)	-
TABLE 5 sl no 10 ( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-
TABLE 5 sl no 11 (Endosulfan (alpha, beta, and sulphate))	-
TABLE 5 sl no 12 ( Ethion)	-
TABLE 5 sl no 13 (Gamma — HCH (Lindane))	-
TABLE 5 sl no 14 ( Isoproturon)	-
TABLE 5 sl no 15 (Malathion)	-
TABLE 5 sl no 16 (Methyl parathion)	-
TABLE 5 sl no 17 (Monocrotophos)	-
TABLE 5 sl no 18 (Phorate)	-

-
Excluding chloramines, cyanide, trihalomethanes

IS 1806 (2018)

Malted milk foods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3-Table 1- ix (Bacterial count)	-
4.3-Table 1- x (Coliform count)	-
4.3-Table 1- xi (E. coli)	-
4.3-Table 1- xii (Yeast and mould count)	-
4.3-Table 1- xiii (Salmonella)	-
4.3-Table 1- xiv (Shigella)	-
4.3-Table 1- xv (Vibrio cholerae )	-
4.3-Table 1- xv ( V. parahaemolyticus)	-
4.3-Table 1- xvi (Faecal streptococci )	-
4.3-Table 1- xvi ( Staphylococcusaureas)	-

-
Excluding moisture, Cocoa Powder

IS 11952 (1986)

Specification for steels for piston pins (Gudgeon Pins)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.2 Table 1 (Carbon-Relevant parts of IS 228)	-
4.1,4.2 Table 1 (Silicon-Relevant parts of IS 228)	-
4.1,4.2 Table 1 (Manganese-Relevant parts of IS 228)	-
4.1,4.2 Table 1 (Sulphur-Relevant parts of IS 228)	-
4.1,4.2 Table 1 (Phosphorous-Relevant parts of IS 228)	-

-
Excluding Grain size, surface defect, Cr, Ni, Mo, Nb, V, Ti, B

IS 12045 (1987)

Specification for alloys used in electrical resistance metallic heating elements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Carbon- Standard Instrumental/Chemical Method)	-
2.1 (Silicon- Standard Instrumental/Chemical Method)	-
2.1 (Manganese- Standard Instrumental/Chemical Method)	-
2.1 (Iron- Standard Instrumental/Chemical Method)	-

-
Excluding Ni, Cr, Fe, Nn and Al

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Freedom from defects)	-
7.0 (Dimension and Tolerances)	-
9.1 Table-2 (Tensile Strength)	-
9.1 Table-2 (Elongation)	-
9.2 (Vickers Hardness)	-
10.1 (Mercurous Nitrate Test)	-

-
Excluding Microalloying Elements

IS 916 (2000)

Square tins for solid products - Specification (Fourth Revision)

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.1.1 (Tin Coating Thickness)	-
4.2 (Dimension and Tolerances)	-
4.3.2 (Handle wire diameter)	-
4.4.1 (Body)	-
4.4.2 (Sides)	-
4.4.3 (Top and Bottom)	-
4.1 (Capacity)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
4.2 (Dimension and Tolerances)	-

-
Chemical: Excluding Cu, Tin, Antimony Mechanical: Test facility is complete

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (Nominal Capacity)	-
Table 1 (Internal Neck Diameter)	-
Table 1 (Distance of graduation line)	-
Table 1 (Overall Height)	-
Table 1 (Bulb Diameter)	-
Table 1 (Base Diameter)	-
Table 1 (Wall Thickness)	-
8.3 (Shape)	-
8.4 (Neck)	-
8.5 (Stopper)	-
9.0 (Graduation Line)	-

-
Excluding Accuracy test and material tests

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List