BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List

Reset

51 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14616 (1999)

Laminated veneer lumber specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimensions)	-
6.2 (Dimensions)	-

-
Test facility is complete

IS 1658 (2006)

Fibre hardboards - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-1 (Dimensions and tolerances in accordance with Annex A&B)	-
6 (Workability and finish)	-

-
Test facility is complete

IS 3480 (1966)

Specification for flexible steel conduits for electrical wiring

size- 6.5 mm,10 mm,16 mm ,25 mm,40mm

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Construction and workmanship, IS 3480)	-
4.2 (Construction and workmanship, IS 3480)	-
4.3 (Construction and workmanship, IS 3480)	-
5.1 (Dimensions, IS 3480)	-
5.1 (Dimensions, IS 3480)	-
5.1 (Dimensions, IS 3480)	-
6.2 (Flexibility, IS 3480)	-
7.1 (Marking, IS 3480)	-
7.1 (Marking, IS 3480)	-
7.1 (Marking, IS 3480)	-
7.1.1 (Marking, IS 3480)	-
8.4 (Linear Breaking Test, IS 3480)	-
8.5 (Test for Flexibility, IS 3480)	-
8.6 (Bend Fracture Test, IS 3480)	-
8.7 (Crushing Test, IS 3480)	-

-
Test facility is complete

IS 1061 (2017)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Composition and Description)	-
4.6 (Detection of Phenolic Compounds)	-
4.2 (Stability after Dilution)	-
4.4 (Mercury Compounds)	-
4.5 (Stability on Storage)	-
4.3/3.2 (Germicidal Value)	-
4.3/3.3 (Germicidal Value)	-
3.1 (Chem) (Class)	-
3.2 (Chem) (Grade)	-
3.3 (Chem) (Type)	-
4.1.1 (chem) (Composition and Description)	-
4.1.2 (Chem) (Composition and Description)	-
4.2 (Chem) (Stability after Dilution)	-
4.3/3.2 (Chem) (Germicidal Value)	-
4.3/3.3 (Chem) (Germicidal Value)	-
4.3/3.4 (Chem) (Germicidal Value)	-
4.3/3.5 (Chem) (Germicidal Value)	-
4.3/3.5 (Chem) (Germicidal Value)	-
4.3/3.5 (Chem) (Germicidal Value)	-
4.4 (Chem) (Mercury Compounds)	-
4.5 (Chem) (Stability on Storage)	-
4.6 (Chem) (Detection of Phenolic Compounds)	-

-
Test facility is complete

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no 6.1 (Description)	-

-
Test facility is complete

IS 8566 (1977)

Specification for steel wire for reeds

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (Phosphorous, Max.)	-
Clause 4.1 (Sulphur)	-
Clause 4.1 (Carbon)	-

-
Test facility is complete

IS 8565 (1977)

Specification for heald wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (Phosphorous, Max.)	-
Clause 4.1 (Sulphur)	-
Clause 4.1 (Manganese)	-
Clause 4.1 (Silicon)	-
Clause 4.1 (Carbon)	-

-
Test facility is complete

IS 8563 (1977)

Specification for half round mild steel wlRe for the manufacture of split pins

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur, Max.)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon, Max.)	-

-
Test facility is complete

IS 4687 (1995)

Gaskets and packings - Gland packings asbestos - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1.1.1 (Loss on Ignition)	-
Cl. 3.1.1.1 (loss on drying)	-

-
Test facility is complete

IS 1165 (2002)

Milk Powder (Bi-lingual)

Rs 10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4.5 (Moisture)	-
3.4.5 (Total solids)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.1 (Description)	-
3.2 (Flavour and taste)	-
3.4.5 (Titratable acidity (lactic acid))	-
3.5 (Bacterial count)	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-

-
Test facility is complete

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Description)	-
5.2.1 (Description)	-
5.3 Table-1 i (Available chlorine)	-
5.3 Table-1 ii (Stability, loss of Chlorine on the basis of initial available chlorine )	-
5.3 Table-1 iiii (Moisture, percent by mass. )	-
5.3 - Table 1 - Sl No - iv (Particle Size (passing through 1.70 mm IS Sieve) - Annex D)	-
Clause 5.4 (Keeping Quality )	-
Clause 5.3 Table 1 (Available Chlorine)	-

-
Test facility is complete

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Rs.2144/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-

-
Test facility is complete

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

Rs.5475/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5.2 (Stability of activity toys with a free height of fall of 600 mm or less)	-
4.7.1.1 and A.4.7. (Stability of swings and other activity toys with crossbeams)	-
4.4.1 (Head and neck entrapment)	-
4.7.3.2 (Toddler swings without a crossbeam)	-
4.7.4 (Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-
4.7.4 (Impact from swing elements - Average surface compression)	-

-
Test facility is complete

IS 412 (1975)

Specification for expanded metal steel sheets for general purposes (Second Revision)

675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2 (Sulphur)	-
Cl. 3.2 (Phosphorus)	-
Cl. 3.2 (Nitrogen)	-

-
Test facility is complete

IS 10 : Part 4 (1989)

Plywood tea - Chests - specification: Part 4 metal fittings

Rs 225/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (MATERIAL)	-
4.1 (Thickness)	-
4.2 (Width)	-
4.3 (Length)	-
4.3.1, 4.3.3, Table 1 (Size of Tea-chest)	-
4.3.1, 4.3.3, Table 1 (Length, corners)	-
4.3.1, 4.3.3, Table 1 (Length, top and bottom)	-
4.3.1, 4.3.3, Table 1 (Position of V notch)	-
4.3.4 (tea-chest ofsize 380 mm X 685 mm x 845 mm, For corners)	-
4.3.4 (tea-chest ofsize 380 mm X 685 mm x 845 mm, For top and bottom)	-

-
Test facility is complete

IS 3954 (1991)

Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4, 6.1, Table 1 (CHG 16, Mass)	-
4, 6.1, Table 1 (CHG 16, Depth of channel)	-
4, 6.1, Table 1 (CHG 16, Width of flange)	-
4, 6.1, Table 1 (CHG 16, Thickness of web)	-
4, 6.1, Table 1 (CHG 16, Thickness of flange)	-
4, 6.1, Table 1 (CHG 16, Radius at root)	-
4, 6.1, Table 1 (CHG 16, Radius at toe)	-
4, 6.1, Table 1 (CHG 16, Centre of gravity)	-
4, 6.1, Table 1 (CHG 16, Slope of flange)	-
4, 6.1, Table 1 (CHG 20, Mass)	-
4, 6.1, Table 1 (CHG 20, Depth of channel)	-
4, 6.1, Table 1 (CHG 20, Width of flange)	-
4, 6.1, Table 1 (CHG 20, Thickness of web)	-
4, 6.1, Table 1 (CHG 16, Thickness of flange)	-
4, 6.1, Table 1 (CHG 20, Slope of flange)	-
4, 6.1, Table 1 (CHG 20, Radius at root)	-
4, 6.1, Table 1 (CHG 16, Radius at toe)	-
4, 6.1, Table 1 (CHG 20, Centre of gravity)	-
4, 6.1, Table 1 (CHG 40, Mass)	-
4, 6.1, Table 1 (CHG 40, Depth of channel)	-
4, 6.1, Table 1 (CHG 40, Width of flange)	-
4, 6.1, Table 1 (CHG 40, Slope of flange)	-
4, 6.1, Table 1 (CHG 40, Radius at root)	-
4, 6.1, Table 1 (CHG 16, Radius at toe)	-
4, 6.1, Table 1 (CHG 40, Centre of gravity)	-

-
Test facility is complete

IS 4366 : Part 2 (1985)

Specification for agricultural tillage discs: Part 2 flat type (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (HARDNESS)	-
5.1, Table 1 (Nominal size)	-
5.1, Table 1 (Thickness)	-
5.2, Table 2 (Dimension)	-
5.2, Table 2 (Tolerance)	-
6.0 (HOLE TYPES)	-
7.1 (Central Hole)	-
7.2 (Pitch Circle Diameter -)	-
7.3 (Fixing Holes)	-
7.4, Table 3 (Nominal Size)	-
7.4, Table 3 (Thickness)	-
7.4, Table 3 (Centre hole diameter)	-
7.4, Table 3 (Pitch circle diameter)	-
7.4, Table 3 (No. Of holes)	-
8.1 (distortion)	-
8.2 (eccentricity)	-
8.3 (thickness of the cutting edge)	-
8.4 (cutting edge of discs)	-
9.0 (DESIGNATION)	-
10.0 (WORKMANSHIP AND FINISH)	-

-
Test facility is complete

IS 2326 (1987)

Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)

1275 incl endu test + material as per ISS View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (NOMINAL SIZE)	-
4.2 (Cistern )	-
4.3 (Depth of Cistern Body)	-
4.4 (Siphonic Apparatus)	-
4.5 (Lid and Cover)	-
4.6 (Feeding Device -)	-
5.0 (FINISH)	-
6.1 (a) (Urinal Delivering capacity)	-
6.1 (b) (Flushing)	-
6.1 (c) (Discharge)	-

-
Complete for Chemical, test facility not available for mechanical

IS 4366 : Part 1 (1985)

Specification for agricultural tillage discs: Part 1 concave type (Second Revision)

Rs 675/- View breakup
material test as per IS:9442

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (MATERIAL)	-
5.0 (HARDNESS)	-
6.1, Table 1 (Nominal Size)	-
6.1, Table 1 (Thickness)	-
6.1, Table 1 (Concavity)	-
6.2, Table 2 (DISC SIZE)	-
6.2, Table 2 (EQUALLY SPACED NOTCH NUMBERS)	-
6.2, Table 2 (Notch Width)	-
6.2, Table 2 (Notch depth)	-
6.3, Table 3 (A)	-
6.3, Table 3 (M)	-
6.3, Table 3 (N)	-
6.3, Table 3 (P)	-
6.4 (Dimension)	-
7.0 (HOLE TYPES)	-
8.1 (Centre Square Hole)	-
8.2 (Circular Centre Hole with Keyway)	-
8.3 (Several Fixing Holes With or Without Circular Centre Hole)	-
9.1 (eccentricity and wobble)	-
9.2 (permanent deflection)	-
9.4 (thickness of the cutting edge)	-
8.4, Table 5 (DISC SIZE)	-
8.4, Table 5 (CENTRE SQUARE HOLE SIZE)	-
8.4, Table 5 (CENTRE Circular HOLE SIZE)	-
8.4, Table 5 (With bolt fixing, Centre hole diameter)	-
8.4, Table 5 (With bolt fixing, Pitch Circle Diameter)	-
8.4, Table 5 (With bolt fixing, Fixing hole size)	-
8.4, Table 5 (With bolt fixing, No. Of holes)	-
8.4, Table 5 (With rivet fixing, Centre hole diameter)	-
8.4, Table 5 (With rivet fixing, Pitch Circle Diameter)	-
8.4, Table 5 (With bolrivet fixing, Fixing hole size)	-
8.4, Table 5 (With rivet fixing, No. Of holes)	-
9.1, Table 6 (Nominal size)	-
9.1, Table 6 (ECCENTRICITY)	-
9.1, Table 6 (Wobble)	-
9.5 (cutting edge of the disc)	-
9.6 (Radius of concavity)	-
9.7 (Square holes)	-
9.8 (crown of the keyway)	-
9.9 (fixing holes)	-
10.0 (DESIGNATION)	-
11.0 (WORKMANSHIP AND FINISH)	-

-
Test facility is complete

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
8.3 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.2, 10.1.2.2 (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
10.1.6 (TENSILE STRENGTH)	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
12, 12.1 (MARKING)	-
12, 12.2 (MARKING)	-
12, 12.1 (MARKING)	-
10.1.9(Chem) (RETENTION OF PRESERVATIVE)	-

-
Test facility is complete

IS 7138 (1973)

Specification for steel tubes for furniture purposes

RS/-300 Chemical View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
4.1(Table 1) (WALL THICKNESS)	-
5 (WORKMANSHIP)	-
7 (STRAIGHTNESS)	-
8 (LENGTHS)	-
9.1 (Tensile Test)	-
9.2 (Bend test)	-
15.4 (b) (Cold impact)	-
9.1 (PIPE ENDS)	-

-
Test facility is complete

IS 4159 (2002)

Mineral filled sheathed heating elements - Specification (Third Revision)

Rs.10500/- View breakup
for 1 to 3 kW Excluding leakage and Hydrostatic Strength Test (for immersion oil heating elements)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.8 of IS 4159:2002 & IS 302‐1:2008 (Protection Against Electric Shock)	-
Cl.10 of IS 4159:2002 & IS 302-1:2008 (Input & Current)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008 (Electrical Insulation and Leakage Current at Operating Temperature)	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008 (Electrical Insulation and Leakage Current at Operating Temperature)	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance)	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance)	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance)	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008 (Insulation Resistance & Electric Strength (after Humidity Treatment))	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008 (Insulation Resistance & Electric Strength (after Humidity Treatment))	-
Cl.18 of IS 4159:2002 (Endurance Test )	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.20 of IS 4159:2002 & IS 302-1: 2008 (Stability & Mechanical Hazards )	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008 (Mechanical Strength)	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008 (Mechanical Strength)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008 (Component )	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008 (Component )	-
Cl.25 of IS 4159:2002 & IS 302-1: 2008 (Supply connection & external flexible cables & cords)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008 (Creepage Distances & Clearances)	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008 (Creepage Distances & Clearances)	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008 (Resistance to Heat, Fire and Tracking)	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008 (Resistance to Heat, Fire and Tracking)	-
Cl. 31 of IS 4159:2002 & IS 302-1: 2008 (Resistance to Rusting)	-
Cl. 33.1 of IS 4159:2002 (Finish Test )	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008 (Creepage Distances & Clearances)	-

-
Standard is revised and test facilty details for latest version mentioned at Sr. no. 16

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 302-2-30:2007 (Classification)	-
Cl.6 of IS 302-2-30:2007 (Classification)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008 (Power Input and Current)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength at operating temp)	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength at operating temp)	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008 (Moisture Resistance)	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008 (Moisture Resistance)	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008 (Stability & Mechanical Hazards)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-

-
Excluding Performance test

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

- View breakup
Rs.9950/- up to and including 1 Kw Rs. 10900/- up to and including 2 Kw

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 (Classification)	-
Cl.6 (Classification)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.4 (Marking and Instructions)	-
Cl.7.5 (Marking and Instructions)	-
Cl.7.6 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.8 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.9 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.10 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.11 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2009 (Marking and Instructions)	-
Cl.7.13 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.14 of IS302-1:2008 (Marking and Instructions)	-
Cl.7.14 (Marking and Instructions)	-
Cl.7.14 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.8 & IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10 & IS:302-1:2008 (Power Input and Current)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11.8 (Heating)	-
Cl.11.8 (Heating)	-
Cl.11.8 (Heating)	-
Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. )	-
Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. )	-
Cl.15 & IS: 302-1:2008 (Moisture Resistance )	-
Cl.15.3 of IS 302-1:200 (Moisture Resistance )	-
Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.101 (Abnormal Operation.)	-
Cl.19.102 (Abnormal Operation.)	-
Cl.19.103 (Abnormal Operation.)	-
Cl.19.104 (Abnormal Operation.)	-
Cl.19.105 (Abnormal Operation.)	-
Cl.19.106 (Abnormal Operation.)	-
Table 8 of IS 302-1:2008 (Abnormal Operation.)	-
Cl.19.107 (Abnormal Operation.)	-
Cl.19.108 (Abnormal Operation.)	-
Cl.19.109 (Abnormal Operation.)	-
Cl.19.110 (Abnormal Operation.)	-
Cl.19.111 (Abnormal Operation.)	-
Cl.19.112 (Abnormal Operation.)	-
Cl.19.113 (Abnormal Operation.)	-
Cl.19.114 (Abnormal Operation.)	-
Cl.20 & IS:302-1:2008 (Stability & Mechanical Hazards)	-
Cl.21 & IS:302-1:2008) (Mechanical Strength.)	-
Cl.21.2 of IS 302-1:2008 (Mechanical Strength.)	-
Cl.21.101 (Mechanical Strength.)	-
Cl.21.102 (Mechanical Strength.)	-
Cl.21.103 (Mechanical Strength.)	-
Cl.22.1 of IS 302-1:2008 (Construction)	-
Cl.22.5 of IS 302-1:2008 (Construction)	-
Cl.22.6 of IS 302-1:2008 (Construction)	-
Cl.22.7 of IS 302-1:2008 (Construction)	-
Cl.22.8 of IS 302-1:2008 (Construction)	-
Cl.22.9 of IS 302-1:2008 (Construction)	-
Cl.22.11 (Construction)	-
Cl.22.12 of IS 302-1:2008 (Construction)	-
Cl.22.13 of IS 302-1:2008 (Construction)	-
Cl.22.15 of IS 302-1:2008 (Construction)	-
Cl.22.18 of IS 302-1:2008 (Construction)	-
Cl.22.20 of IS 302-1:2008 (Construction)	-
Cl.22.21 of IS 302-1:2008 (Construction)	-
Cl.23 & IS:302-1:2008 (Internal Wiring )	-
Cl.23.4 & Cl.29 of 302-1:2008 (Internal Wiring )	-
Cl.23.5 of 302-1:2008 (Internal Wiring )	-
Cl.23.7 of 302-1:2008 (Internal Wiring )	-
C.23.7 of 302-1:2008 (Internal Wiring )	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
C.24.2 of 302-1:2008 (Component)	-
Cl.24.10 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
C.24.2 of 302-1:2008 (Component)	-
Cl.24.10 (Component)	-
Cl.25.1 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.2 of IS 3021:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.3 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.4 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.5 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.6 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.7. (Supply Connection and External Flexible Cords )	-
Cl.25.8 (Supply Connection and External Flexible Cords )	-
Cl. 25.9 (Supply Connection and External Flexible Cords )	-
Cl.25.10 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.11 (Supply Connection and External Flexible Cords )	-
Cl. 25.12 (Supply Connection and External Flexible Cords )	-
Cl. 25.13 (Supply Connection and External Flexible Cords )	-
Cl.7.101 (Marking and Instructions)	-
Cl.25.14 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.15 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.17 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.18 (Supply Connection and External Flexible Cords )	-
Cl.25.20 (Supply Connection and External Flexible Cords )	-
Cl.26.1 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.26.10 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.26.11 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.27.1 of 302-1:2008 (Provision for Earthing.)	-
Cl.27.5 of 302-1:2008 (Provision for Earthing.)	-
Cl.28 of 302-1:2008 (Screws and Connections.)	-
Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.30 & IS:302-1:2008 (Resistance to Heat and Fire)	-
Cl.30.2.2 of 302-1:2008 (Resistance to Heat and Fire)	-
Cl.31 & IS:302-1:2008 (Resistance to Rusting.)	-
Cl.32 & IS:302-1:2008 (Radition,Toxicity and similar Hazards.)	-

-
Excluding 1. Cl. 14 Transient Overvoltage Test IS 302-1:2008 2. Cl. 19.11 and Cl. 19.12 abnormal test (for Electronic circuit) 3. Cl.24 Component Test IS 302-1:2008

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
Testing charges for the product are: Including Transverse Strength (optional test) test 9,100.00 Excluding Transverse Strength (optional test) test 7,900.00 -Testing charges for only chemical test report: 4,300.00 -Testing charges for only physical test report including optional tests: 4,800.00 -Testing charges for only physical test report excluding optional tests: 3,600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Fineness 4031 Part 2)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-

-
Test facility is complete

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

Rs 300/- + mat test as per IS:432(Pt 2) View breakup
Rs 300/- + mat test as per IS:432(Pt 2)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (DIMENSIONS)	-
7 (SIZES OF SHEETS ‘OR ROLLS)	-
8 (MASS)	-
9.2 (Tolerance on Size of Mesh)	-
9.3 (Tolerance on Size of Sheet)	-
9.4 (Tolerance on Mass of Fabric)	-
10 (MECHANICAL PROPERTIES)	-
11.2 (Tensile Test)	-
11.3 (Reverse Bend Test)	-

-
Test facility is complete

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 & 5 (Visual Examination -IS:3419)	-
6.2 & 9.1- Table-1, ii (Inside Diameter of Collar for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, iii (Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, iv (Minimum overall length for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, v (Minimum wall thickness for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, ii (Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, iii (Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, iv (Minimum overall length (a) for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, v (Minimum overall length (l) for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, vi (Minimum wall thickness for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, ii (Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iii (Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iv (Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iv (Minimum length for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, vi (Minimum wall thickness for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-4, ii (Outside Dameter of Normal type bend -IS:3419)	-
6.2 & 9.1- Table-4, iii (Minimum Inside Diameter of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-4, v (Length (l1) of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-5, ii (Outside Dameter of Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, iii (Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, iv (Inside Diameter of collar for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, v (R- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, vi (Y- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, vii (l2- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-6, ii (Inside Diameter of collar for Normal type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, iii (Length (l) of Normal Type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, iv (Radious(r) of Normal Type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, v (Minimum wall thicknes of Elbows -IS:3419)	-
6.2 & 9.1- Table-7, ii (Inside Diameter of Collear for Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, iii (Length (l) of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, iv (Radious(r) of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, v ( Minimum wall thicknes of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-8, ii (Inside Diameter of Collear for socketed type Tees - IS:3419)	-
6.2 & 9.1- Table-8, iii (a - of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-8, iv (l - of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-8, v (Minimum wall thicknes of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-9, ii (B - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, iii (C - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, iv (D - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, v (E - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, vi (F(Max) - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, vii (F(Min) - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, viii (G - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, ix (t - of spout Type Circular Boxes -IS:3419)	-
10 (Resistance to Heat -IS:3419)	-
11 (Resistance to Burning - IS 3419)	-
12 (Moisture Absorption - IS 3419)	-
14.1 (Copper Test - IS 3419)	-
15, 15.3 (Resistance to Oil - IS 3419)	-
15,15.4 (Resistance to Oil - IS 3419)	-
16- Appendix-A (Resistance to Impact -IS 3419)	-
17.2 (Electric Strength - IS 3419)	-
17.3 (Insulation Resistance - IS 3419)	-

-
"Test facility is complete "

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 3 (Tensile Test-1608:Part 1)	-
6.1, Table 3 (Yield Strength, Mpa)	-
6.1, Table 3 (Elongation, %)	-
7 (Workmanship & Finish)	-
8 (Freedom from defects)	-
6.1, Table 3 (Reduction in area, Percent)	-
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 5.2 (Sulphur- IS 228(Part 9))	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
"Test facility is complete "

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Rs. 3300.00/, Rs. 2850.00/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
6.3 (Standard Mark on Conduit)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.2 (Maximum and minimum outside diameter of conduit)	-
7.2 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10 (Resistance to Heat -Ball presure test)	-
11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-

-
"Test facility is complete "

IS 9857 (1990)

Welding cables - Specification (First Revision)

Rs 11400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Conductor : Material )	-
5 (SEPARATOR)	-
6 (COVERING)	-
7 (CONDUCTOR : CONSTRUCTION )	-
8 (S E P A R A T O R)	-
9.1 (C O V E R I N G : Application )	-
9.2 (T h i c k n e s s o f C o v e r i n g)	-
9.3 (T o l e r a n c e on Thickness o f C o v e r i n g)	-
9.4 (A p p l i c a t i o n of C o v e r i n g)	-
9.5 (Colour of C o v e r i n g)	-
10.1 a) 1) (Annealing test - IS 10810: Part 1)	-
10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5)	-
10.1 c) 1) (Physical tests for covering : Tensile strength )	-
10.1 c) 1) (Physical tests for covering : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength )	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-
10.1 c) 3) (Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-
10.1 c) 3) (Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-
10.1 c) 4) (Physical tests for covering - Oil Resistance : Tensile strength variation )	-
10.1 c) 4) (Physical tests for covering - Oil Resistance : Elongation variation at break )	-
10.1 c) 5) (Hot set test )	-
10.1 c) 5) (Permanent set )	-
11.1 (High Voltage Test ( Water Immersion Test ))	-
11.3 (Static Flexibility Test)	-
11.4 (Flammability Test)	-
12.1 (Manufacturer's Identification)	-
12.2 (Cable Identification)	-
12.3 (Cable Code)	-
13.1 (Packing )	-
13.2 (Marking)	-
14 (CABLE RATINGS)	-
15 (VOLTAGE DROP)	-

-
Test facility is complete

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Laboratory (NRL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- nrol@bis.gov.in

Scope List