BIS - LIMS (Laboratory Information Management System)

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

14/17, 2nd Floor, Site-4 Industrial Area, Sahibabad, Ghaziabad U.P., Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

9873911918 support1@globalcompliancelab.com

Scope List

Reset

14 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	2000	-
12(Electric Strength)	-	2000	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	2000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	2000	-
20(Resistance to corrosion)	-	2000	-
16(Enclosures)	-	2000	-
16(Inductor)	-	2000	-
16(SMPS/Mains Transformer)	-	2000	-
16(PCB material)	-	2000	-
19(Transparent cover)	-	2000	-
19(Bobbin)	-	2000	-
16(Insulated tape)	-	2000	-
16(Heat shrinkage sleeve)	-	2000	-
19(Terminals)	-	2000	-
7(Marking)	-	2000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	2000	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	2000	-
12(ELECTRIC STRENGTH)	-	2000	-
14(FAULT CONDITIONS)	-	2000	-
15(TRANSFORMER HEATING)	-	2000	-
16(CONSTRUCTION)	-	2000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	2000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	2000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
20(RESISTANCE TO CORROSION)	-	2000	-
4(GENERAL REQUIREMENTS)	-	2000	-
16(Connector)	-	2000	-
16(Internal wire)	-	2000	-
5(GENERAL NOTES ON TESTS)	-	2000	-
6(CLASSIFICATION)	-	2000	-
11(MOISTURE RESISTANCE AND INSULATION)	-	2000	-
9(TERMINALS)	-	2000	-

20 Jun, 2026

-
Included w.e.f 23.09.2025 Exclusion: Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors), MOV/VDR , Metal base PCB for LED, Fuse, LED, Opto-coupler, EMI/EMC filter, Winding wire, Thin sheet materials

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	2000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	2000	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distance and clearances)	-	2000	-
4(General requirement and General test requirements)	-	2000	-
5(Marking)	-	2000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Strength after humidity treatment)	-	2000	-
9(Mechanical strength)	-	2000	-
10(Cap temperature rise)	-	2000	-
11(Resistance to heat)	-	2000	-
12(Resistance to flame and ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distances and clearances)	-	2000	-
15(Selection of lamps for tests (Sampling))	-	2000	-
16(Condition of compliance)	-	2000	-
17(Tests)	-	2000	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	2000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	2000	-
Annex B(Lamps with operating position limitations)	-	2000	-
5(Marking)	-	2000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	2000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	2000	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distance and clearances)	-	2000	-
4(General requirement and General test requirements)	-	2000	-
5(Marking)	-	2000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Strength after humidity treatment)	-	2000	-
9(Mechanical strength)	-	2000	-
10(Cap temperature rise)	-	2000	-
11(Resistance to heat)	-	2000	-
12(Resistance to flame and ignition)	-	2000	-
13(Fault conditions)	-	2000	-
14(Creepage distances and clearances)	-	2000	-
15(Selection of lamps for tests (Sampling))	-	2000	-
16(Condition of compliance)	-	2000	-
17(Tests)	-	2000	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	2000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	2000	-
Annex B(Lamps with operating position limitations)	-	2000	-

20 Jun, 2026

-
Included w.e.f. 29.10.2025

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	3000	-
5(Rating)	-	3000	-
6(Classification)	-	3000	-
7(Marking)	-	3000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	3000	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPERATURE RISE)	-	3000	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	3000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	3000	-
17(OVERLOAD PROTECTION)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	3000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
32(RADIATION HAZARDS)	-	3000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	3000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
32(RADIATION HAZARDS)	-	3000	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	3000	-

20 Jun, 2026

-
Included w.e.f. 29.09.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 24 (COMPONENTS) 9 (""STARTING OF MOTOR-OPERATING APPLIANCES "") "

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	3000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	3000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	3000	-
Cl. 22 302-2-32 : 1994(Construction )	-	3000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	3000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	3000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	3000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	3000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	3000	-
Cl. 7 302-2-32 : 1994(Marking)	-	3000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	3000	-

20 Jun, 2026

-
Included w.e.f. 04.09.2025 Exclusion : "Cl. 32 302-2-32 : 1994 (Radiation Hazards) Cl. 24 (Components) Cl. 18(Endurance) Cl. 8(Starting of motor operated appliances) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	3000	-
6(Classification)	-	3000	-
7(Marking)	-	3000	-
8(Protection against Access to Live Parts)	-	3000	-
11(Temperature Rise/ Heating)	-	3000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	3000	-
15(Moisture Resistance)	-	3000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	3000	-
21(Mechanical strength)	-	3000	-
22(Construction)	-	3000	-
23(Internal Wiring)	-	3000	-
25(Supply Connection & External Flexible Cords)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
27(Provision For Earthing)	-	3000	-
28(Screws & Connections)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
30(Resistance to Heat & Fire)	-	3000	-
31(Resistance to Rusting)	-	3000	-
32(Radiation hazards)	-	3000	-

20 Jun, 2026

-
Included w.e.f. 06.10.2025 Exclusion: "10 (""Power Input & Current"") 12 (Operation Under Overload Conditions of Appliances with heating Element) 17 (Overload Protection/ Overload Protection of Transformers & Associated Circuits) 18 (Endurance) 19 (Abnormal Operation) 20 (Stability & Mechanical Hazards) 24 (Components) 9 (Starting Of Motor Operated Appliances) Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics) "

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	3000	-
31(Resistance to Rusting)	-	3000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	3000	-
28(Screws & Connection)	-	3000	-
27(Provision For Earthing)	-	3000	-
26(Terminals For External Conductors)	-	3000	-
25(Supply Connection & External Flexible Cables and Cords)	-	3000	-
23(Internal wiring)	-	3000	-
22(Construction)	-	3000	-
21(Mechanical strength)	-	3000	-
20(Stability & Mechanical Hazards)	-	3000	-
19(Abnormal Operation)	-	3000	-
18(Endurance)	-	3000	-
17(Overload Protection)	-	3000	-
15(Moisture Resistance)	-	3000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	3000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	3000	-
12(Operation under overload conditions of appliances with heating elements)	-	3000	-
11(Temperature Rise/Heating)	-	3000	-
10(Input)	-	3000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	3000	-
7(Marking/ Marking & Instructions)	-	3000	-
6(Classification)	-	3000	-
5(Rating)	-	3000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	3000	-

20 Jun, 2026

-
Included w.e.f. 29.09.2025 Exclusion: "24 (Component) 9 (Starting Of Motor Operated Appliances) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

IS 302 : Part 2 : Sec 208 (1994)

Safety of household and similar electrtcal appliances: Part 2 particular requirements: Sec 208 single walled baking ovens

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	3000	-
4(GENERAL NOTES ON TESTS)	-	3000	-
5(RATING)	-	3000	-
6(CLASSIFICATION)	-	3000	-
7(MARKING)	-	3000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	3000	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPERATURE RISE)	-	3000	-
12(OPERATLON UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	3000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	3000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	3000	-
15(MOISTURE RESESTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	3000	-
17(OVERLOAD PROTECTION)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	3000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
101.2(Acceptance Tests)	-	3000	-
101.3(Routine Tests)	-	3000	-
32(RADIATION HAZARDS)	-	3000	-
101.1(Type Tests)	-	3000	-

20 Jun, 2026

-
Included w.e.f 23.09.2025 Exclusion: Cl-19.11.4.1-Cl-19.11.4.7(EMI/EMC), Cl 24 (COMPONENTS)

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	3000	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	3000	-
10(POWER INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
22.16(Automatic cord reel)	-	3000	-
22.32(Oxygen bomb for rubber material)	-	3000	-
22.47(Water pressure inlet)	-	3000	-
22.3(Flexing test)	-	3000	-
4(General requirements)	-	3000	-
5(General Conditions of tests)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
Marking- IS 302-1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.9(Marking- IS 302-1)	-	3000	-
7.12(Marking- IS 302-2-15)	-	3000	-
7.12(Marking- IS 302-1)	-	3000	-
7.12.1(Marking- IS 302-1)	-	3000	-
7.12.3(Marking- IS 302-1)	-	3000	-
7.12.5(Marking- IS 302-1)	-	3000	-
7.12.6(Marking- IS 302-1)	-	3000	-
7.13(Marking- IS 302-1)	-	3000	-
7.14(Marking- IS 302-1)	-	3000	-
7.15(Marking- IS 302-1)	-	3000	-
7.101(Marking- IS 302-2-15)	-	3000	-
8(Protection Against Electric Shock, IS 302-1)	-	3000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	3000	-
16(Leakage current as per Cl 16, IS 302-1)	-	3000	-
16(electric strength as per Cl 16, IS 302-1)	-	3000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	3000	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
23.2(Internal Wiring, IS 302-1)	-	3000	-
23.4(Internal Wiring, IS 302-1)	-	3000	-
23.5(Internal Wiring, IS 302-1)	-	3000	-
23.6(Internal Wiring, IS 302-1)	-	3000	-
23.7(Internal Wiring, IS 302-1)	-	3000	-
23.8(Internal Wiring, IS 302-1)	-	3000	-
23.9(Internal Wiring, IS 302-1)	-	3000	-
23.1O(Internal Wiring, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
27.2(Provision for Earthing, IS 302-1)	-	3000	-
27.3(Provision for Earthing, IS 302-1)	-	3000	-
27.4(Provision for Earthing, IS 302-1)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28(Screws & Connections, IS 302-1)	-	3000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3000	-
31(Resistance of Rusting, IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.1O(Marking- IS 302-1)	-	3000	-
7.11(Marking- IS 302-1)	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
6.0(Classification)	-	3000	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	3000	-
10(POWER INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
22.16(Automatic cord reel)	-	3000	-
22.32(Oxygen bomb for rubber material)	-	3000	-
22.47(Water pressure inlet)	-	3000	-
22.3(Flexing test)	-	3000	-
4(General requirements)	-	3000	-
5(General Conditions of tests)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
Marking- IS 302-1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.9(Marking- IS 302-1)	-	3000	-
7.12(Marking- IS 302-2-15)	-	3000	-
7.12(Marking- IS 302-1)	-	3000	-
7.12.1(Marking- IS 302-1)	-	3000	-
7.12.3(Marking- IS 302-1)	-	3000	-
7.12.5(Marking- IS 302-1)	-	3000	-
7.12.6(Marking- IS 302-1)	-	3000	-
7.13(Marking- IS 302-1)	-	3000	-
7.14(Marking- IS 302-1)	-	3000	-
7.15(Marking- IS 302-1)	-	3000	-
7.101(Marking- IS 302-2-15)	-	3000	-
8(Protection Against Electric Shock, IS 302-1)	-	3000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	3000	-
16(Leakage current as per Cl 16, IS 302-1)	-	3000	-
16(electric strength as per Cl 16, IS 302-1)	-	3000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	3000	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
23.2(Internal Wiring, IS 302-1)	-	3000	-
23.4(Internal Wiring, IS 302-1)	-	3000	-
23.5(Internal Wiring, IS 302-1)	-	3000	-
23.6(Internal Wiring, IS 302-1)	-	3000	-
23.7(Internal Wiring, IS 302-1)	-	3000	-
23.8(Internal Wiring, IS 302-1)	-	3000	-
23.9(Internal Wiring, IS 302-1)	-	3000	-
23.1O(Internal Wiring, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
27.2(Provision for Earthing, IS 302-1)	-	3000	-
27.3(Provision for Earthing, IS 302-1)	-	3000	-
27.4(Provision for Earthing, IS 302-1)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28(Screws & Connections, IS 302-1)	-	3000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3000	-
31(Resistance of Rusting, IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.1O(Marking- IS 302-1)	-	3000	-
7.11(Marking- IS 302-1)	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
6.0(Classification)	-	3000	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	3000	-
10(POWER INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
22.16(Automatic cord reel)	-	3000	-
22.32(Oxygen bomb for rubber material)	-	3000	-
22.47(Water pressure inlet)	-	3000	-
22.3(Flexing test)	-	3000	-
4(General requirements)	-	3000	-
5(General Conditions of tests)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-1)	-	3000	-
Marking- IS 302-1(Marking- IS 302-1)	-	3000	-
7.1(Marking- IS 302-2-15)	-	3000	-
7.3(Marking- IS 302-1)	-	3000	-
7.4(Marking- IS 302-1)	-	3000	-
7.6(Marking- IS 302-1)	-	3000	-
7.7(Marking- IS 302-1)	-	3000	-
7.8(Marking- IS 302-1)	-	3000	-
7.9(Marking- IS 302-1)	-	3000	-
7.12(Marking- IS 302-2-15)	-	3000	-
7.12(Marking- IS 302-1)	-	3000	-
7.12.1(Marking- IS 302-1)	-	3000	-
7.12.3(Marking- IS 302-1)	-	3000	-
7.12.5(Marking- IS 302-1)	-	3000	-
7.12.6(Marking- IS 302-1)	-	3000	-
7.13(Marking- IS 302-1)	-	3000	-
7.14(Marking- IS 302-1)	-	3000	-
7.15(Marking- IS 302-1)	-	3000	-
7.101(Marking- IS 302-2-15)	-	3000	-
8(Protection Against Electric Shock, IS 302-1)	-	3000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	3000	-
16(Leakage current as per Cl 16, IS 302-1)	-	3000	-
16(electric strength as per Cl 16, IS 302-1)	-	3000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	3000	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	3000	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
23.2(Internal Wiring, IS 302-1)	-	3000	-
23.4(Internal Wiring, IS 302-1)	-	3000	-
23.5(Internal Wiring, IS 302-1)	-	3000	-
23.6(Internal Wiring, IS 302-1)	-	3000	-
23.7(Internal Wiring, IS 302-1)	-	3000	-
23.8(Internal Wiring, IS 302-1)	-	3000	-
23.9(Internal Wiring, IS 302-1)	-	3000	-
23.1O(Internal Wiring, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3000	-
26(Terminals for External Conductors, IS 302-1)	-	3000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
27.2(Provision for Earthing, IS 302-1)	-	3000	-
27.3(Provision for Earthing, IS 302-1)	-	3000	-
27.4(Provision for Earthing, IS 302-1)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28(Screws & Connections, IS 302-1)	-	3000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3000	-
31(Resistance of Rusting, IS 302-1)	-	3000	-
6(Classification- IS 302-1)	-	3000	-
7.5(Marking- IS 302-1)	-	3000	-
7.1O(Marking- IS 302-1)	-	3000	-
7.11(Marking- IS 302-1)	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	3000	-

20 Jun, 2026

-
Included w.e.f. 14.10.2025 Exclusion: "18 (ENDURANCE) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 22.106 (Interlocks) 24 (Components) 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) 9 (STARTING OF MOTOR-OPERATED APPLIANCES) "

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for the tests)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19(Abnormal Operation)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	2000	-
22.11(Construction, IS 302-1)	-	2000	-
22.16(Construction)	-	2000	-
22.32(Construction, IS 302-1)	-	2000	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	2000	-
22.42(Construction)	-	2000	-
22.2(Construction, IS 302-1)	-	2000	-
22.3(Construction, IS 302-1)	-	2000	-
B.22.4(Construction, IS 302-1)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
24(Components)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
28(Screw test and connections)	-	2000	-
28.1(Screws and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
4(General requirement)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
15.2(Spillage Test)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
A.2(Earth continuity test)	-	2000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
B.22.5(Construction, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
5(General conditions for the tests)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19(Abnormal Operation)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	2000	-
22.11(Construction, IS 302-1)	-	2000	-
22.16(Construction)	-	2000	-
22.32(Construction, IS 302-1)	-	2000	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	2000	-
22.42(Construction)	-	2000	-
22.2(Construction, IS 302-1)	-	2000	-
22.3(Construction, IS 302-1)	-	2000	-
B.22.4(Construction, IS 302-1)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
24(Components)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
28(Screw test and connections)	-	2000	-
28.1(Screws and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
4(General requirement)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
15.2(Spillage Test)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
A.2(Earth continuity test)	-	2000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
B.22.5(Construction, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-

20 Jun, 2026

-
Included w.e.f.03.07.2025 Exclusion (EMI/EMC) Cl 19.11.4.1 to Cl 19.11.4.7 24(component)

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Class-1 / Class-2 / Class-3

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	4000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	2500	-
2.4(Limited current circuits)	-	3000	-
2.5(Limited power sources .)	-	2500	-
2.6(Provisions for earthing and bonding)	-	3000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	3000	-
2.9(Electrical insulation)	-	7000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2500	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	2000	-
3.3(Wiring terminals for connection of external conductors)	-	3000	-
3.4(Disconnection from the mains supply)	-	3000	-
3.5(Interconnection of equipment)	-	2000	-
4.1(Stability)	-	3000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.5(Thermal requirements)	-	5000	-
4.6(Openings in enclosures)	-	2000	-
4.7(Resistance to fire)	-	2500	-
5.1(Touch current and protective conductor curren)	-	2500	-
5.2(Electric strength)	-	2500	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1250	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1250	-
7.1(General)	-	625	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	625	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	625	-
7.4(Insulation between primary circuits and cable distribution systems)	-	625	-
1.5(Components)	-	1000	Facility not available
1.5(Components)	-	1000	-

20 Jun, 2026

-
Exclusion: Cl. 1.5 (Components), Cl. 2.8.5 (Moving parts), Cl. 2.8.7 (Switches and relays), Cl. 2.10.5.4 (Semiconductor devices), Cl. 2.10.8.1 (Tests on coated printed boards and coated components), Cl. 3.2.5.1 (AC Power supply cords), Cl. 4.2.8 (cathode ray Tube), Cl. 4.3.8 (Batteries), Cl. 4.3.12 (Flammable liquids), Cl. 4.3.13.2 (Ionizing Radiation), Cl. 4.3.13.3 (Effect of ultraviolet (UV) radiation on material), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (Effect of Lasers (including LEDs)), Annex-U (Insulating winding wires).

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Class-1, 2 and 3

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	10000	-
7(Heating under normal operating conditions)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	8000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	5000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	-
15(TERMINALS)	-	3000	-
16(External flexible cords)	-	4000	-
17(Electrical connections and mechanical fixings)	-	5000	-
19(Stability and mechanical hazards)	-	5000	-
20(Resistance to fire)	-	5000	-
6.3()	-	2000	-

20 Jun, 2026

-
Exclusion: Cl. 6.1 (Ionizing radiation), Cl. 6.2 (Laser Radiation), Cl. 8.17 (Wound Components), Cl.13.5 (Printed boards), Cl. 14 (Components), Cl. 14.10 (Motor testing), Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Cl.19.6 (Mechanical strength of Glass).

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

class 3

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-

20 Jun, 2026

-
Included w.e.f. 19.09.2023

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

Class-1

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	2000	-
8(Protection against live parts)	-	5000	-
10(POWER INPUT AND CURRENT)	-	6000	-
11(HEATING)	-	8000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	-
14(IMPULSE VOLTAGE TEST)	-	2000	-
15(HUMIDITY TREATMENT TEST)	-	8000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	15000	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	3000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	5000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	5000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	5000	-

20 Jun, 2026

-
Exclusion: Cl.19.11.4.1 to 19.11.4.7 requires EMI/EMC test , Cl. 24 (COMPONENTS)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Class - 1 and 2

64000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
10.1(Power input)	-	3000	-
10.2(Current input)	-	3000	-
11.1(General)	-	3000	-
11.2(General)	-	3000	-
11.3(Heating)	-	2000	-
13.1(General)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	800	-
16.1(General)	-	800	-
16.2(Leakage Current (after Clause 15))	-	800	-
16.3(Electric Strength (after clause 15 and 16.2))	-	600	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	3000	-
22(Construction verification related test)	-	2000	-
23(General)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	3000	-
30.1(Ball pressure test)	-	700	-
30.2(Glow Wire Test)	-	700	-
30.2(Needle Flame Test)	-	600	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
6(Classification- IS 302-1)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-

20 Jun, 2026

-
Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics), Cl. 24 (Components), Cl. 32 (Radiation Toxicity and Similar Hazards).

Bureau of Indian Standards

The National Standards Body of India

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

14/17, 2nd Floor, Site-4 Industrial Area, Sahibabad, Ghaziabad U.P., Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

9873911918 support1@globalcompliancelab.com

Scope List