BIS - LIMS (Laboratory Information Management System)

BISS LABS -DIVISION OF ITW INDIA PRIVATE LIMITED

497/E, 14th Cross, 4th Phase, 2nd Stage Peenya Industrial Area, Bangalore: 560058 Karnataka State, India, Bangaluru, Bengaluru Urban, Karnataka, 560058

9880217600 Shine_Kumar@instron.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2403 (2024)

Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision)

479434 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.3(Preloading)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.4(Length validation)	-	51250	-
Cl-3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-

10 Jan, 2027

-
Included w.e.f.03.06.2025 Exclusion Cl-5.6 (Sprocket rim profiles) Cl-5.9 (Pitch accuracy of sprocket teeth) Cl-5.11 (Bore tolerance)

IS 2403 (2014)

Short - Pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Third Revision)

479434 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
3.4.2(Tensile Test)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
3.4.3(Preloading)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
3.4.4(Length validation- Measuring load)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
3.4.4(Length validation- Length)	-	51250	-
3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples
3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
3.4.2(Tensile Test)	-	51250	-
3.4.3(Preloading)	-	51250	-
3.4.4(Length validation- Measuring load)	-	51250	-
3.4.4(Length validation- Length)	-	51250	-
3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples

10 Jan, 2027

-
Included w.e.f. 21.06.2024 Excluding Sprockets

IS 16651 (2017)

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification

1046250 View breakup
for Fatigue Test (Cl 8.5)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.5(Fatigue Test)	-	209250		2250 INR/ hour/sample (Minimum chargeable amount is 22500 INR) One batch of testing comprises of 5 samples.

10 Jan, 2027

-
Only for Fatigue Test (Cl 8.5)

Bureau of Indian Standards

The National Standards Body of India

BISS LABS -DIVISION OF ITW INDIA PRIVATE LIMITED

497/E, 14th Cross, 4th Phase, 2nd Stage Peenya Industrial Area, Bangalore: 560058 Karnataka State, India, Bangaluru, Bengaluru Urban, Karnataka, 560058

9880217600 Shine_Kumar@instron.com

Scope List