BIS - LIMS (Laboratory Information Management System)

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

F-3, Sector - 6, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9871062220 testing@ursindia.com

Scope List

Reset

45 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

145000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	5000	10% discount BIS
Cl-4.2(Energy source classifications)	-	5000	10% discount BIS
Cl-4.3(Protection against energy sources)	-	5000	10% discount BIS
Cl-4.4(Safeguards)	-	5000	10% discount BIS
Cl-4.5(Explosion)	-	5000	10% discount BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	10% discount BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	10% discount BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	10% discount BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	10% discount BIS
Cl-4.10(Components requirements)	-	5000	10% discount BIS
Cl-5.1(General- Electrically-caused injury)	-	5000	10% discount BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	10% discount BIS
Cl-5.3(Protection against electrical energy sources)	-	5000	10% discount BIS
Cl-5.4(Insulation materials and requirements)	-	5000	10% discount BIS
Cl-5.5(Components as safeguards)	-	5000	10% discount BIS
Cl-5.6(Protective conductor)	-	5000	10% discount BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	10% discount BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	10% discount BIS
Cl-6.1(General- Electrically-caused fire)	-	5000	10% discount BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	10% discount BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	10% discount BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	10% discount BIS
Cl-6.5(Internal and external wiring)	-	5000	10% discount BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	5000	10% discount BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	5000	10% discount BIS
Cl-7.3(Ozone exposure)	-	5000	10% discount BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	5000	10% discount BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	5000	10% discount BIS
Cl-8.1(General- Mechanically-caused injury)	-	5000	10% discount BIS
Cl-8.2(Mechanical energy source classifications)	-	5000	10% discount BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	10% discount BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	10% discount BIS
Cl-8.5(Safeguards against moving parts)	-	5000	10% discount BIS
Cl-8.6(Stability of equipment)	-	5000	10% discount BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	10% discount BIS
Cl-8.8(Handle strength)	-	5000	10% discount BIS
Cl-8.9(Wheels or casters attachment requirements)	-	5000	10% discount BIS
Cl-8.10(Carts, stands, and similar carriers)	-	5000	10% discount BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	10% discount BIS
Cl-10.1(General-Radiation)	-	5000	10% discount BIS
Cl-10.2(Radiation energy source classifications)	-	5000	10% discount BIS
Annex A(Examples of equipment within the scope of this document)	-	5000	10% discount BIS
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	10% discount BIS
Annex B-2(Normal operating conditions)	-	5000	10% discount BIS
Annex B-3(Simulated abnormal operating conditions)	-	5000	10% discount BIS
Annex B-4(Simulated single fault conditions)	-	5000	10% discount BIS
Annex C-1(Protection of materials in equipment from UV radiation)	-	5000	10% discount BIS
Cl-10.3(Safeguards against laser radiation)	-	5000	10% discount BIS
Annex D-1(Impulse test generators)	-	2500	10% discount BIS
Annex D-2(Antenna interface test generator)	-	2500	10% discount BIS
Annex D-3(Electronic pulse generator)	-	2500	10% discount BIS
Annex E-1(Electrical energy source classification for audio signals)	-	2500	10% discount BIS
Annex E-2(Audio signals used during test)	-	2500	10% discount BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	2500	10% discount BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	2500	10% discount BIS
Annex F-2(Letter symbols and graphical symbols)	-	2500	10% discount BIS
Annex F-3(Equipment markings)	-	2500	10% discount BIS
Annex F-4(Instructions)	-	2500	10% discount BIS
Annex F-5(Instructional safeguards)	-	2500	10% discount BIS
Annex G-1(Switches)	-	2500	10% discount BIS
Annex G-2(Relays)	-	2500	10% discount BIS
Annex G-3(Protective devices)	-	2500	10% discount BIS
Annex G-4(Connectors)	-	2500	10% discount BIS
Annex G-5(Wound components)	-	2500	10% discount BIS
Annex G-6(Wire insulation)	-	2500	10% discount BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	2500	10% discount BIS
Annex G-8(Varistors)	-	2500	10% discount BIS
Annex G-9(Integrated circuit (IC) current limiters)	-	2500	10% discount BIS
Annex G-10(Resistors)	-	2500	10% discount BIS
Annex G-11(Capacitors and RC units)	-	2500	10% discount BIS
Annex G-12(Optocouplers)	-	2500	10% discount BIS
Annex G-13(Printed boards)	-	2500	10% discount BIS
Annex G-14(Coatings on component terminals)	-	2500	10% discount BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2500	10% discount BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	2500	10% discount BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	2500	10% discount BIS
Annex H-2(Method A)	-	2500	10% discount BIS
Annex H-3(Method B)	-	2500	10% discount BIS
Cl-9.1(General-Thermal burn injury)	-	2500	10% discount BIS
Cl-9.2(Thermal energy source classifications)	-	2500	10% discount BIS
Cl-9.3(Touch temperature limits)	-	2500	10% discount BIS
Cl-9.4(Safeguards against thermal energy sources)	-	2500	10% discount BIS
Cl-9.5(Requirements for safeguards)	-	2500	10% discount BIS
Cl-9.6(Requirements for wireless power transmitters)	-	2500	10% discount BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	2500	10% discount BIS
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	2500	10% discount BIS
Annex J-2(Type tests)	-	2500	10% discount BIS
Annex J-3(Testing during manufacturing)	-	2500	10% discount BIS
Annex K-1(General- Safety interlocks)	-	2500	10% discount BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	2500	10% discount BIS
Annex K-3(Inadvertent change of operating mode)	-	2500	10% discount BIS
Annex K-4(Interlock safeguard override)	-	2500	10% discount BIS
Annex K-5(Fail-safe)	-	2500	10% discount BIS
Annex K-6(Mechanically operated safety interlocks)	-	2500	10% discount BIS
Annex K-7(Interlock circuit isolation)	-	2500	10% discount BIS
Annex L-1(General requirements)	-	2500	10% discount BIS
Annex L-2(Permanently connected equipment)	-	2500	10% discount BIS
Annex L-3()	-	2500	10% discount BIS
Annex L-4(Single-phase equipment)	-	2500	10% discount BIS
Annex L-5(Three-phase equipment)	-	2500	10% discount BIS
Annex L-6(Switches as disconnect devices)	-	2500	10% discount BIS
Annex L-7(Plugs as disconnect devices)	-	2500	10% discount BIS
Annex L-8(Multiple power sources)	-	2500	10% discount BIS
Annex L-9(Compliance criteria)	-	2500	10% discount BIS
Annex M-1(General requirements)	-	2500	10% discount BIS
Annex M-2(Safety of batteries and their cells)	-	2500	10% discount BIS
Annex M-3(Protection circuits for batteries provided within the equipment)	-	2500	10% discount BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	2500	10% discount BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	2500	10% discount BIS
Annex M-6(Safeguards against short-circuits)	-	2500	10% discount BIS
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	2500	10% discount BIS
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	2500	10% discount BIS
Annex M-9(Preventing electrolyte spillage)	-	2500	10% discount BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	2500	10% discount BIS
Annex N(Electrochemical potentials (V))	-	2500	10% discount BIS
Annex O(Measurement of creepage distances and clearances)	-	2500	10% discount BIS
Annex P-1(General-Safeguards against conductive objects)	-	2500	10% discount BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	2500	10% discount BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	2500	10% discount BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	2500	10% discount BIS
Annex Q-1(Limited power source)	-	2500	10% discount BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	2500	10% discount BIS
Annex R(Limited short-circuit test)	-	2500	10% discount BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	2500	10% discount BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	2500	10% discount BIS
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2500	10% discount BIS
Annex S-4(Flammability classification of materials)	-	2500	10% discount BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	2500	10% discount BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	2500	10% discount BIS
Annex T-1(General-Mechanical strength tests)	-	2500	10% discount BIS
Annex T-2(Steady force test, 10 N)	-	2500	10% discount BIS
Annex T-3(Steady force test, 30 N)	-	2500	10% discount BIS
Annex T-4(Steady force test, 100 N)	-	2500	10% discount BIS
Annex T-5(Steady force test, 250 N)	-	2500	10% discount BIS
Annex T-6(Enclosure impact test)	-	2500	10% discount BIS
Annex T-7(Drop test)	-	2500	10% discount BIS
Annex T-8(Stress relief test)	-	2500	10% discount BIS
Annex T-9(Glass impact test)	-	2500	10% discount BIS
Annex T-10(Glass fragmentation test)	-	2500	10% discount BIS
Annex T-11(Test for telescoping or rod antennas)	-	2500	10% discount BIS
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	2500	10% discount BIS
Annex V-1(Accessible parts of equipment)	-	2500	10% discount BIS
Annex V-2(Accessible part criterion)	-	2500	10% discount BIS
Annex W(Comparison of terms introduced in this document)	-	2500	10% discount BIS
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	2500	10% discount BIS
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	2500	10% discount BIS
Annex Y-2(Resistance to UV radiation)	-	2500	10% discount BIS
Annex Y-3(Resistance to corrosion)	-	2500	10% discount BIS
Annex Y-4(Gaskets)	-	2500	10% discount BIS
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	2500	10% discount BIS
Annex Y-6(Mechanical strength of enclosures)	-	2500	10% discount BIS
Cl-4.1(General- materials, components)	-	-	-
Cl-4.2(Energy source classifications)	-	-	-
Cl-4.3(Protection against energy sources)	-	-	-
Cl-4.4(Safeguards)	-	-	-
Cl-4.5(Explosion)	-	-	-
Cl-4.6(Fixing of conductors and conductive parts)	-	-	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	-	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	-	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	-	-
Cl-4.10(Components requirements)	-	-	-
Cl-5.1(General- Electrically-caused injury)	-	-	-
Cl-5.2(Classification and limits of electrical energy sources)	-	-	-
Cl-5.3(Protection against electrical energy sources)	-	-	-
Cl-5.4(Insulation materials and requirements)	-	-	-
Cl-5.5(Components as safeguards)	-	-	-
Cl-5.6(Protective conductor)	-	-	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	-	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	-	-
Cl-6.1(General- Electrically-caused fire)	-	-	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	-	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	-	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	-	-
Cl-6.5(Internal and external wiring)	-	-	-
Cl-7.1(General- Injury caused by hazardous substances)	-	-	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	-	-
Cl-7.3(Ozone exposure)	-	-	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	-	-
Cl-7.5(Use of instructional safeguards and instructions)	-	-	-
Cl-8.1(General- Mechanically-caused injury)	-	-	-
Cl-8.2(Mechanical energy source classifications)	-	-	-
Cl-8.3(Safeguards against mechanical energy sources)	-	-	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	-	-
Cl-8.5(Safeguards against moving parts)	-	-	-
Cl-8.6(Stability of equipment)	-	-	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	-	-
Cl-8.8(Handle strength)	-	-	-
Cl-8.9(Wheels or casters attachment requirements)	-	-	-
Cl-8.10(Carts, stands, and similar carriers)	-	-	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	-	-
Cl-10.1(General-Radiation)	-	-	-
Cl-10.2(Radiation energy source classifications)	-	-	-
Annex A(Examples of equipment within the scope of this document)	-	-	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	-	-
Annex B-2(Normal operating conditions)	-	-	-
Annex B-3(Simulated abnormal operating conditions)	-	-	-
Annex B-4(Simulated single fault conditions)	-	-	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	-	-
Cl-10.3(Safeguards against laser radiation)	-	-	-
Annex D-1(Impulse test generators)	-	-	-
Annex D-2(Antenna interface test generator)	-	-	-
Annex D-3(Electronic pulse generator)	-	-	-
Annex E-1(Electrical energy source classification for audio signals)	-	-	-
Annex E-2(Audio signals used during test)	-	-	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	-	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	-	-
Annex F-2(Letter symbols and graphical symbols)	-	-	-
Annex F-3(Equipment markings)	-	-	-
Annex F-4(Instructions)	-	-	-
Annex F-5(Instructional safeguards)	-	-	-
Annex G-1(Switches)	-	-	-
Annex G-2(Relays)	-	-	-
Annex G-3(Protective devices)	-	-	-
Annex G-4(Connectors)	-	-	-
Annex G-5(Wound components)	-	-	-
Annex G-6(Wire insulation)	-	-	-
Annex G-7(Mains power supply cords and interconnection cables)	-	-	-
Annex G-8(Varistors)	-	-	-
Annex G-9(Integrated circuit (IC) current limiters)	-	-	-
Annex G-10(Resistors)	-	-	-
Annex G-11(Capacitors and RC units)	-	-	-
Annex G-12(Optocouplers)	-	-	-
Annex G-13(Printed boards)	-	-	-
Annex G-14(Coatings on component terminals)	-	-	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	-	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	-	-
Annex H-1(General- Criteria for telephone ringing signals)	-	-	-
Annex H-2(Method A)	-	-	-
Annex H-3(Method B)	-	-	-
Cl-9.1(General-Thermal burn injury)	-	-	-
Cl-9.2(Thermal energy source classifications)	-	-	-
Cl-9.3(Touch temperature limits)	-	-	-
Cl-9.4(Safeguards against thermal energy sources)	-	-	-
Cl-9.5(Requirements for safeguards)	-	-	-
Cl-9.6(Requirements for wireless power transmitters)	-	-	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	-	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	-	-
Annex J-2(Type tests)	-	-	-
Annex J-3(Testing during manufacturing)	-	-	-
Annex K-1(General- Safety interlocks)	-	-	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	-	-
Annex K-3(Inadvertent change of operating mode)	-	-	-
Annex K-4(Interlock safeguard override)	-	-	-
Annex K-5(Fail-safe)	-	-	-
Annex K-6(Mechanically operated safety interlocks)	-	-	-
Annex K-7(Interlock circuit isolation)	-	-	-
Annex L-1(General requirements)	-	-	-
Annex L-2(Permanently connected equipment)	-	-	-
Annex L-3()	-	-	-
Annex L-4(Single-phase equipment)	-	-	-
Annex L-5(Three-phase equipment)	-	-	-
Annex L-6(Switches as disconnect devices)	-	-	-
Annex L-7(Plugs as disconnect devices)	-	-	-
Annex L-8(Multiple power sources)	-	-	-
Annex L-9(Compliance criteria)	-	-	-
Annex M-1(General requirements)	-	-	-
Annex M-2(Safety of batteries and their cells)	-	-	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	-	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	-	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	-	-
Annex M-6(Safeguards against short-circuits)	-	-	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	-	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	-	-
Annex M-9(Preventing electrolyte spillage)	-	-	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	-	-
Annex N(Electrochemical potentials (V))	-	-	-
Annex O(Measurement of creepage distances and clearances)	-	-	-
Annex P-1(General-Safeguards against conductive objects)	-	-	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	-	-
Annex P-3(Safeguards against spillage of internal liquids)	-	-	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	-	-
Annex Q-1(Limited power source)	-	-	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	-	-
Annex R(Limited short-circuit test)	-	-	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	-	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	-	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	-	-
Annex S-4(Flammability classification of materials)	-	-	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	-	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	-	-
Annex T-1(General-Mechanical strength tests)	-	-	-
Annex T-2(Steady force test, 10 N)	-	-	-
Annex T-3(Steady force test, 30 N)	-	-	-
Annex T-4(Steady force test, 100 N)	-	-	-
Annex T-5(Steady force test, 250 N)	-	-	-
Annex T-6(Enclosure impact test)	-	-	-
Annex T-7(Drop test)	-	-	-
Annex T-8(Stress relief test)	-	-	-
Annex T-9(Glass impact test)	-	-	-
Annex T-10(Glass fragmentation test)	-	-	-
Annex T-11(Test for telescoping or rod antennas)	-	-	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	-	-
Annex V-1(Accessible parts of equipment)	-	-	-
Annex V-2(Accessible part criterion)	-	-	-
Annex W(Comparison of terms introduced in this document)	-	-	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	-	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	-	-
Annex Y-2(Resistance to UV radiation)	-	-	-
Annex Y-3(Resistance to corrosion)	-	-	-
Annex Y-4(Gaskets)	-	-	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	-	-
Annex Y-6(Mechanical strength of enclosures)	-	-	-

31 Dec, 2026

-
Included w.e.f. 28.08.2025 Exclusion: " Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Annex C-2 (UV light conditioning test)"

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3(Specifications)	-	5000	10% discount BIS
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	10% discount BIS
3.5(Safety specification)	-	35000	10% discount BIS
4(Marking)	-	5000	10% discount BIS
5(Operating Life Test)	-	10000	10% discount BIS
3.1, Table-1, i) a)(Hardware specification)	-	5000	10% discount BIS
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	10% discount BIS
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	10% discount BIS
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	10% discount BIS
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	10% discount BIS
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	10% discount BIS
3.1, Table-1, i) g)(Teletext)	-	5000	10% discount BIS
3.1, Table-1, i) h)(Multi-language support)	-	5000	10% discount BIS
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	10% discount BIS
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	10% discount BIS
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	10% discount BIS
3.1, Table-1, i) n)(Data services)	-	5000	10% discount BIS
3.1, Table-1, i) p)(OSD)	-	5000	10% discount BIS
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	10% discount BIS
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	10% discount BIS
3.1, Table-1, i) s)(Time)	-	5000	10% discount BIS
3.1, Table-1, i) t)(Digital TV output)	-	5000	10% discount BIS
3.4, Table-2, i) a)(Input voltage range)	-	5000	10% discount BIS
3.4, Table-2, i) b)(Frequency)	-	5000	10% discount BIS
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	10% discount BIS
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	10% discount BIS
3.1, Table-1, ii) c)(Network evolution)	-	5000	10% discount BIS
3.4, Table-2, iii) c)(RF input impedance)	-	15000	10% discount BIS
3.1, Table-1, ii) d)(Services available)	-	5000	10% discount BIS
3.1, Table-1, ii) e)(Selection via Service List)	-	5000	10% discount BIS
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	10% discount BIS
3.1, Table-1, ii) g)(Favourite Channel list)	-	5000	10% discount BIS
3.1, Table-1, ii) h)(Hidden Services)	-	5000	10% discount BIS
3.4, Table-2, iii) b)(Input frequency range)	-	5000	10% discount BIS
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	10% discount BIS
3.1, Table-1, ii) k)(RF input signal)	-	5000	10% discount BIS
3.1, Table-1, ii) m)(LNB supply current)	-	5000	10% discount BIS
3.1, Table-1, ii) n)(LNB supply voltage)	-	5000	10% discount BIS
3.1, Table-1, ii) p)(LNB Control)	-	5000	10% discount BIS
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	10% discount BIS
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	10% discount BIS
3.4, Table-2, iv) c)(RF input impedance)	-	10000	10% discount BIS
3.4, Table-2, iv) b)(Input frequency range)	-	10000	10% discount BIS
3.4, Table-2, iv) a)(Input level per carrier)	-	10000	10% discount BIS
3.4, Table-2, v)(Symbol rate)	-	15000	10% discount BIS
3.4, Table-2, vi)(RF input return loss)	-	35000	10% discount BIS
3.4, Table-2, vii)(DisEqC)	-	5000	10% discount BIS
3.4, Table-2, viii)(Operating ambient temperature range)	-	10000	10% discount BIS
3.4, Table-2, ix)(Operating humidity range)	-	10000	10% discount BIS
3.4, Table-2, x)(Power consumption)	-	10000	10% discount BIS
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	10000	10% discount BIS
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	10% discount BIS
3.1, Table-1, v) a)(Remote Control)	-	5000	10% discount BIS
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	10% discount BIS
3.1, Table-1, v) c)(Support package)	-	5000	10% discount BIS
3.3(Specifications)	-	-	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	-	-
3.5(Safety specification)	-	-	-
4(Marking)	-	-	-
5(Operating Life Test)	-	-	-
3.1, Table-1, i) a)(Hardware specification)	-	-	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	-	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	-	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	-	-
3.1, Table-1, i) e)(Active Format descriptors)	-	-	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	-	-
3.1, Table-1, i) g)(Teletext)	-	-	-
3.1, Table-1, i) h)(Multi-language support)	-	-	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	-	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	-	-
3.1, Table-1, i) m)(Service demultiplexing)	-	-	-
3.1, Table-1, i) n)(Data services)	-	-	-
3.1, Table-1, i) p)(OSD)	-	-	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	-	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	-	-
3.1, Table-1, i) s)(Time)	-	-	-
3.1, Table-1, i) t)(Digital TV output)	-	-	-
3.4, Table-2, i) a)(Input voltage range)	-	-	-
3.4, Table-2, i) b)(Frequency)	-	-	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	-	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	-	-
3.1, Table-1, ii) c)(Network evolution)	-	-	-
3.4, Table-2, iii) c)(RF input impedance)	-	-	-
3.1, Table-1, ii) d)(Services available)	-	-	-
3.1, Table-1, ii) e)(Selection via Service List)	-	-	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	-	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	-	-
3.1, Table-1, ii) h)(Hidden Services)	-	-	-
3.4, Table-2, iii) b)(Input frequency range)	-	-	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	-	-
3.1, Table-1, ii) k)(RF input signal)	-	-	-
3.1, Table-1, ii) m)(LNB supply current)	-	-	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	-	-
3.1, Table-1, ii) p)(LNB Control)	-	-	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	-	-
3.4, Table-2, iii) a)(Input level per carrier)	-	-	-
3.4, Table-2, iv) c)(RF input impedance)	-	-	-
3.4, Table-2, iv) b)(Input frequency range)	-	-	-
3.4, Table-2, iv) a)(Input level per carrier)	-	-	-
3.4, Table-2, v)(Symbol rate)	-	-	-
3.4, Table-2, vi)(RF input return loss)	-	-	-
3.4, Table-2, vii)(DisEqC)	-	-	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	-	-
3.4, Table-2, ix)(Operating humidity range)	-	-	-
3.4, Table-2, x)(Power consumption)	-	-	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	-	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	-	-
3.1, Table-1, v) a)(Remote Control)	-	-	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	-	-
3.1, Table-1, v) c)(Support package)	-	-	-

31 Dec, 2026

-
Included w.e.f. 07.08.2025 Exclusion: Cl.3.6 (Electromagnetic Compatibility (EMC) Requirements)

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	5% Discount for BIS
Cl-5(General Conditions for the tests)	-	500	5% Discount for BIS
Cl-6(Classification)	-	500	5% Discount for BIS
Cl-7(Marking)	-	500	5% Discount for BIS
Cl-8(Safety Requirements)	-	1000	5% Discount for BIS
Cl-9(Endurance fpr motor and base assembly)	-	2000	5% Discount for BIS
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	3000	5% Discount for BIS
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	3000	5% Discount for BIS
Cl-10.4(Idli Batter)	-	3000	5% Discount for BIS
Cl-10.5(Operational Tests for Juicers)	-	3000	5% Discount for BIS
Cl-11(Temperature Withstand Test for Bowl)	-	2000	5% Discount for BIS
Cl-12.1(Test for Switches)	-	2000	5% Discount for BIS
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1500	5% Discount for BIS
Cl-14.2, Table-2 (ii)(Power input and current)	-	1500	5% Discount for BIS
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	5% Discount for BIS
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	5000	5% Discount for BIS
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1500	5% Discount for BIS
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	5% Discount for BIS
Cl-13(Strength of Assembly)	-	1500	5% Discount for BIS
Cl-19.11.4.1(Electrostatic discharges)	-	0	-
Cl-19.11.4.2(Radiated fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
Cl-4(General Requirements)	-	0	NIL
Cl-5(General Conditions for the tests)	-	0	NIL
Cl-6(Classification)	-	0	NIL
Cl-7(Marking)	-	0	NIL
Cl-8(Safety Requirements)	-	0	NIL
Cl-9(Endurance fpr motor and base assembly)	-	0	NIL
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	NIL
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	NIL
Cl-10.4(Idli Batter)	-	0	NIL
Cl-10.5(Operational Tests for Juicers)	-	0	NIL
Cl-11(Temperature Withstand Test for Bowl)	-	0	NIL
Cl-12.1(Test for Switches)	-	0	NIL
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	NIL
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	NIL
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	NIL
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	NIL
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	NIL
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	NIL
Cl-13(Strength of Assembly)	-	0	NIL
Cl-19.11.4.1(Electrostatic discharges)	-	0	NIL
Cl-19.11.4.2(Radiated fields)	-	0	NIL
Cl-19.11.4.3(Fast transient bursts)	-	0	NIL
Cl-19.11.4.4(Surge immunity test)	-	0	NIL
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	NIL
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	NIL
Cl-19.11.4.7(Harmonics)	-	0	NIL
Cl-4(General Requirements)	-	0	NIL
Cl-5(General Conditions for the tests)	-	0	NIL
Cl-6(Classification)	-	0	NIL
Cl-7(Marking)	-	0	NIL
Cl-8(Safety Requirements)	-	0	NIL
Cl-9(Endurance fpr motor and base assembly)	-	0	NIL
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	NIL
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	NIL
Cl-10.4(Idli Batter)	-	0	NIL
Cl-10.5(Operational Tests for Juicers)	-	0	NIL
Cl-11(Temperature Withstand Test for Bowl)	-	0	NIL
Cl-12.1(Test for Switches)	-	0	NIL
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	NIL
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	NIL
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	NIL
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	NIL
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	NIL
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	NIL
Cl-13(Strength of Assembly)	-	0	NIL
Cl-19.11.4.1(Electrostatic discharges)	-	0	NIL
Cl-19.11.4.2(Radiated fields)	-	0	NIL
Cl-19.11.4.3(Fast transient bursts)	-	0	NIL
Cl-19.11.4.4(Surge immunity test)	-	0	NIL
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	NIL
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	NIL
Cl-19.11.4.7(Harmonics)	-	0	NIL
Cl-4(General Requirements)	-	0	NIL
Cl-5(General Conditions for the tests)	-	0	NIL
Cl-6(Classification)	-	0	NIL
Cl-7(Marking)	-	0	NIL
Cl-8(Safety Requirements)	-	0	NIL
Cl-9(Endurance fpr motor and base assembly)	-	0	NIL
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	NIL
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	NIL
Cl-10.4(Idli Batter)	-	0	NIL
Cl-10.5(Operational Tests for Juicers)	-	0	NIL
Cl-11(Temperature Withstand Test for Bowl)	-	0	NIL
Cl-12.1(Test for Switches)	-	0	NIL
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	NIL
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	NIL
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	NIL
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	NIL
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	NIL
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	NIL
Cl-13(Strength of Assembly)	-	0	NIL
Cl-19.11.4.1(Electrostatic discharges)	-	0	NIL
Cl-19.11.4.2(Radiated fields)	-	0	NIL
Cl-19.11.4.3(Fast transient bursts)	-	0	NIL
Cl-19.11.4.4(Surge immunity test)	-	0	NIL
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	NIL
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	NIL
Cl-19.11.4.7(Harmonics)	-	0	NIL
Cl-4(General Requirements)	-	0	NIL
Cl-5(General Conditions for the tests)	-	0	NIL
Cl-6(Classification)	-	0	NIL
Cl-7(Marking)	-	0	NIL
Cl-8(Safety Requirements)	-	0	NIL
Cl-9(Endurance fpr motor and base assembly)	-	0	NIL
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	NIL
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	NIL
Cl-10.4(Idli Batter)	-	0	NIL
Cl-10.5(Operational Tests for Juicers)	-	0	NIL
Cl-11(Temperature Withstand Test for Bowl)	-	0	NIL
Cl-12.1(Test for Switches)	-	0	NIL
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	NIL
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	NIL
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	NIL
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	NIL
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	NIL
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	NIL
Cl-13(Strength of Assembly)	-	0	NIL

31 Dec, 2026

-
Included w.e.f. 14.08.2025 Exclusion: "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) "

IS 18663 (2024)

Note Sorting Machines- Specifications

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1)(General Requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.2 and subclauses of IS/IEC 62368-1)(Energy source classifications)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.3 and subclauses of IS/IEC 62368-1)(Protection against energy sources)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.4 and subclauses of IS/IEC 62368-1)(Safeguards)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.5 and subclauses of IS/IEC 62368-1)("Explosion- Requirements ")	-	2000	-
Cl 4.2 Safety requirements (Cl 4.6 and subclauses of IS/IEC 62368-1)(Fixing of conductors- Requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.7 and subclauses of IS/IEC 62368-1)(Equipment for direct insertion into mains socket-outlets)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.8 and subclausesof IS/IEC 62368-1)(Equipment containing coin / button cell batteries)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.9 and subclauses of IS/IEC 62368-1)(Likelihood of fire or shock due to entry of conductive objects)	-	2000	-
Cl 4.2 Safety requirements (Cl 4.10 and subclauses of IS/IEC 62368-1)(Components requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.2 and subclauses of IS/IEC 62368-1)(Classification and limits of electrical energy sources)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.3 and subclauses of IS/IEC 62368-1)(Protection against electrical energy sources)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1)(Insulation materials and requirements)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.5 and subclauses of IS/IEC 62368-1)(Components as safeguards)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.6 and subclauses of IS/IEC 62368-1)(Protective conductor)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.7 and subclauses of IS/IEC 62368-1)(Prospective touch voltage, touch current and protective conductor current.)	-	2000	-
Cl 4.2 Safety requirements (Cl 5.8 and subclauses of IS/IEC 62368-1)(Backfeed safeguard in battery backed up supplies)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.1 of IS/IEC 62368-1)(Electrically-caused fire)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.2 and subclauses of IS/IEC 62368-1)(Classification of power sources (PS) and potential ignition sources (PIS).)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.3 and subclauses of IS/IEC 62368-1)(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.4 and subclauses of IS/IEC 62368-1)(Safeguards against fire under single fault conditions)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.5 and subclauses of IS/IEC 62368-1)(Internal and external wiring)	-	2000	-
Cl 4.2 Safety requirements (Cl 6.6 and subclauses of IS/IEC 62368-1)(Safeguards against fire due to the connection of additional equipment)	-	2000	-
Cl 4.2 Safety requirements (Cl 7, 7.1 to 7.6 and subclauses of IS/IEC 62368-1)(Injury caused by hazardous substances)	-	2000	-
Cl 4.2 Safety requirements (Cl 8, 8.1 to 8.12 and subclauses of IS/IEC 62368-1)(Mechanically-caused injury)	-	2000	-
Cl 4.2 Safety requirements (Cl 9, 9.1 to 9.6 and subclauses of IS/IEC 62368-1)(Thermal burn injury)	-	2000	-
Cl 4.2 Safety requirements (Annex.B, B.1 to B.4 including its subclauses of IS/IEC 62368-1))(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	2000	-
Cl 4.2 Safety requirements (Annex. D, D.1, D.2, D.3 of IS/IEC 62368-1)(Test generators)	-	2000	-
Cl 4.2 Safety requirements ( Annex E, E.1, E.2, E.3 of IS/IEC 62368-1)(Test conditions for equipment containing audio amplifiers)	-	2000	-
Cl 4.2 Safety requirements ( Annex. F, F.1 to F.5 including its subclauses of IS/IEC 62368-1)(Equipment markings, instructions, and instructional safeguards)	-	2000	-
Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1)(Components)	-	2000	-
Cl 4.2 Safety requirements ( Annex. H, H1 to H3 including its subclauses of IS/IEC 62368-1)(Criteria for telephone ringing signals .)	-	2000	-
Cl 4.2 Safety requirements ( Annex I of IS/IEC 62368-1)(Overvoltage categories)	-	2000	-
Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1)(Insulated winding wires for use without interleaved insulation)	-	2000	-
Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1)(Safety Interlocks)	-	2000	-
Cl 4.2 Safety requirements ( Annex. L .L1 to L.9 including its subclauses of IS/IEC 62368-1)(Disconnect devices)	-	2000	-
Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1)(Equipment containing batteries and their protection circuits)	-	2000	-
Cl 4.2 Safety requirements ( Annex.N of IS/IEC 62368-1)(Electrochemical potentials)	-	2000	-
Cl 4.2 Safety requirements ( Annex.O of IS/IEC 62368-1)(Measurement of creepage distances and clearances)	-	2000	-
Cl 4.2 Safety requirements ( Annex.P, P.1 to P.4 and its subclauses of IS/IEC 62368-1)(Safeguards against conductive objects)	-	2000	-
Cl 4.2 Safety requirements ( Annex.Q, Q.1 to Q.2 and its subclauses of IS/IEC 62368-1)(Circuits intended for interconnection with building wiring)	-	2000	-
Cl 4.2 Safety requirements ( Annex.R, R.1 to R.4 and its subclauses of IS/IEC 62368-1)(Limited short-circuit test)	-	2000	-
Cl 4.2 Safety requirements ( Annex.S S.1 to S.5 and its subclauses of IS/IEC 62368-1)(Tests for resistance to heat and fire)	-	2000	-
Cl 4.2 Safety requirements ( Annex T, T.1 to T.11 and its subclauses of IS/IEC 62368-1)(Mechanical strength tests)	-	2000	-
Cl 4.2 Safety requirements ( Annex U, U.1 to U.3 and its subclauses of IS/IEC 62368-1)(Mechanical strength of CRTs and protection against the effects of implosion)	-	2000	-
Cl 4.2 Safety requirements ( Annex V, V.1 to V.2 and its subclauses of IS/IEC 62368-1)(Determination of accessible parts)	-	2000	-
Cl 4.2 Safety requirements ( Annex X of IS/IEC 62368-1)(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	2000	-
Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1)(Construction requirements for outdoor enclosure)	-	2000	-
Cl-6.1, Table-4 (i)(Marking and instructions)	-	2000	-
Cl-6.1, Table-4 (ii)(Protection against access to live parts)	-	2000	-
Cl-6.1, Table-4 (iii)(Power input and current)	-	2000	-
Cl-6.1, Table-4 (iv)(Heating)	-	2000	-
Cl-6.1, Table-4 (v)(Creepage clearance and solid insulation)	-	2000	-
Cl-6.1, Table-4 (vi)(Humidity conditioning)	-	2000	-
Cl-6.1, Table-4 (vii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-6.1, Table-4 (viii)(Provision for earthing)	-	2000	-

31 Dec, 2026

-
Included w.e.f.29.05.2025 For safty requirments only.

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	100	10 % Discount (BIS)
Cl.31(Verification)	-	500	-
Cl.30(Verification)	-	1000	-
CL.29(Verification)	-	500	-
Cl.28(Verification)	-	500	-
Cl.27(Verification)	-	500	-
Cl.26(Verification)	-	500	-
Cl.25(Verification)	-	1500	-
Cl.24(Verification)	-	800	-
Cl.23(Verification)	-	500	-
Cl.22(Verification)	-	500	-
Cl.21(Verification)	-	500	-
Cl.20(Verification)	-	1000	-
Cl.19(Verification)	-	3000	-
Cl. 16(Verification)	-	1500	-
Cl.15(Verification)	-	3000	-
Cl.14(Verification)	-	1000	-
Cl.13(Verification)	-	1000	-
Cl.11(Verification)	-	5000	-
Cl.10(Verification)	-	1000	-
Cl.8(Verification)	-	500	-
Cl. 7(Verification)	-	500	-
Cl. 6(Verification)	-	100	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	0	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	0	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	0	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	0	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	0	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	0	-
Cl. 24 IS 302-2-9(Components)	-	0	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	0	-
Cl. 22 IS 302-2-9(Construction )	-	0	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	0	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	0	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	0	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	0	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	0	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	0	-
Cl. 13 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 IS 302-2-9(Heating)	-	0	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	0	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	0	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	0	-
Cl. 6 IS 302-2-9(Classification)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

31 Dec, 2026

-
Included w.e.f 29.04.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	100	NIL
8(Protection against access to live parts)	-	200	NIL
10(Power input and current)	-	600	NIL
11(Heating)	-	1000	NIL
12(Charging of metal-ion batteries)	-	2000	NIL
13.1 &13.2(Leakage current test)	-	500	NIL
13.1 &13.3(Electric strength test)	-	500	NIL
14(Transient overvoltages)	-	1000	NIL
15(Moisture resistance)	-	2500	NIL
15.3(Moisture resistance)	-	2500	NIL
16.1 &16.2(Leakage current test)	-	500	NIL
16.1 & 16.3(Electric strength test)	-	500	NIL
17(Overload protection of transformers and associated circuits)	-	1000	NIL
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2000	NIL
19.101(Abnormal operation)	-	1000	NIL
20.1(Stability and mechanical hazards)	-	500	NIL
20.2(Stability and mechanical hazards)	-	500	NIL
21(Mechanical strength)	-	200	NIL
21.101(Mechanical strength)	-	200	NIL
21.102(Mechanical strength)	-	200	NIL
21.103(Mechanical strength)	-	200	NIL
22(Construction)	-	400	NIL
22.101(Construction)	-	200	NIL
22.102(Construction)	-	200	NIL
22.103(Construction)	-	200	NIL
23(Internal wiring)	-	500	NIL
24(Components)	-	1500	NIL
25("Supply connection and external flexible cords")	-	1000	NIL
26("Terminals for external conductors")	-	1000	NIL
27(Provision for earthing)	-	500	NIL
28(Screws and connections)	-	500	NIL
29("Clearances, creepage distances and solid insulation")	-	1000	NIL
30(Resistance to heat and fire)	-	2500	NIL
31(Resistance to rusting)	-	2500	NIL
32("Radiation, toxicity and similar hazards")	-	100	NIL
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-

31 Dec, 2026

-
Included w.e.f 29.04.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

260000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	10% discount for BIS
7.1(Charging Procedures For Test Purposes)	-	25000	10% discount for BIS
7.2.1(External Short-Circuit Test)	-	25000	10% discount for BIS
7.2.2(Impact Test)	-	10000	10% discount for BIS
7.2.3(Drop Test)	-	10000	10% discount for BIS
7.2.4(Thermal Abuse Test)	-	20000	10% discount for BIS
7.2.5(Overcharge Test)	-	20000	10% discount for BIS
7.2.6(Forced Discharge Test)	-	25000	10% discount for BIS
7.3.2(Internal short-circuit test)	-	25000	10% discount for BIS
7.3.3(Propagation Test)	-	25000	10% discount for BIS
8(Battery System Safety)	-	60000	10% discount for BIS
9(Information For Safety)	-	5000	10% discount for BIS
10(Marking and Designation)	-	5000	10% discount for BIS
5(General Safety Considerations)	-	-	-
7.1(Charging Procedures For Test Purposes)	-	-	-
7.2.1(External Short-Circuit Test)	-	-	-
7.2.2(Impact Test)	-	-	-
7.2.3(Drop Test)	-	-	-
7.2.4(Thermal Abuse Test)	-	-	-
7.2.5(Overcharge Test)	-	-	-
7.2.6(Forced Discharge Test)	-	-	-
7.3.2(Internal short-circuit test)	-	-	-
7.3.3(Propagation Test)	-	-	-
8(Battery System Safety)	-	-	-
9(Information For Safety)	-	-	-
10(Marking and Designation)	-	-	-

31 Dec, 2026

-
Included w.e.f. 04.04.2025

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	10000	-
5.2(Capacity)	-	10000	-
5.3(SOC Adjustment)	-	10000	-
6.2.1(Vibration)	-	10000	-
6.2.2(Mechanical Shock)	-	10000	-
6.2.3(Crush)	-	10000	-
6.3.1(High Temperature Endurance)	-	10000	-
6.3.2(Temperature Cycling)	-	10000	-
6.4.1(External Short Circuit)	-	10000	-
6.4.2(Overcharge)	-	10000	-
6.4.3(Forced Discharge)	-	10000	-
6.4.4(Internal short circuit test)	-	10000	-
6.4.3(Forced Discharge)	-	10000	-

31 Dec, 2026

-
Included w.e.f.25.03.2025

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	2000	15% Discount for BIS
6(Classification)	-	100	15% Discount for BIS
5(General conditions for the tests)	-	100	15% Discount for BIS
11.8(Temperature rise)	-	1000	15% Discount for BIS
11.7(Duration corresponding)	-	100	15% Discount for BIS
11.6(Combined appliances)	-	100	15% Discount for BIS
11.5(Motor-operated appliances)	-	100	15% Discount for BIS
11.4(Heating appliances)	-	100	15% Discount for BIS
8.1.5(Live parts of built-in appliances)	-	200	15% Discount for BIS
18(Endurance)	-	100	15% Discount for BIS
17(Overload protection of transformers and associated circuits)	-	600	15% Discount for BIS
16(Leakage current and electric strength)	-	500	15% Discount for BIS
4(General requirement)	-	100	15% Discount for BIS
32(Radiation Toxicity and Similar Hazards)	-	400	15% Discount for BIS
31(Resistance to Rusting)	-	500	15% Discount for BIS
30.2(Needle Flame Test)	-	500	15% Discount for BIS
30.2(Glow Wire Test)	-	1000	15% Discount for BIS
30.1(Ball pressure test)	-	1000	15% Discount for BIS
29(clearance, creepage distances and solid insulation)	-	500	15% Discount for BIS
28(Screw test and connections)	-	500	15% Discount for BIS
27(Provision for earthing)	-	500	15% Discount for BIS
26(Terminals for external conductors)	-	500	15% Discount for BIS
25(Supply connection and external flexible cords)	-	500	15% Discount for BIS
24(Components)	-	100	15% Discount for BIS
23(Internal wiring)	-	400	15% Discount for BIS
22(Construction)	-	500	15% Discount for BIS
21(Mechanical Strength)	-	100	15% Discount for BIS
20(Stability and mechanical hazards)	-	100	15% Discount for BIS
19(Abnormal Operation)	-	2000	15% Discount for BIS
18(Endurance)	-	100	15% Discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	600	15% Discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	500	15% Discount for BIS
16.2(Leakage Current (after Clause 15))	-	500	15% Discount for BIS
16.1(General)	-	100	15% Discount for BIS
16.0(General)	-	100	15% Discount for BIS
15.3(Humidity Test)	-	2000	15% Discount for BIS
15.2(Spillage Test)	-	300	15% Discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	15% Discount for BIS
15.0(Moisture resistance)	-	100	15% Discount for BIS
14(Transient Over Voltages)	-	400	15% Discount for BIS
13.3(Electric Strength at operating temperature)	-	500	15% Discount for BIS
13.2(Leakage current at operating temperature)	-	500	15% Discount for BIS
13(Leakage current and electric strength at operating temperature)	-	500	15% Discount for BIS
11.3(Heating)	-	500	15% Discount for BIS
11.2(General)	-	100	15% Discount for BIS
11.1(General)	-	100	15% Discount for BIS
10.2(Current input)	-	100	15% Discount for BIS
10.1(Power input)	-	100	15% Discount for BIS
9(Starting of motor operation test requirements and tests)	-	100	15% Discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	100	15% Discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	15% Discount for BIS
8.1.2(Protection against live parts in openings)	-	100	15% Discount for BIS
8.1.1(Protection against live parts in all positions)	-	100	15% Discount for BIS
7(Marking and instructions)	-	100	15% Discount for BIS
A.2(Earth continuity test)	-	100	15% Discount for BIS
Annex C(Ageing test on motors)	-	100	15% Discount for BIS
Annex D(Thermal motor protectors)	-	100	15% Discount for BIS
15.2(Moisture resistance)	-	100	15% Discount for BIS
19.17(Abnormal operation)	-	100	15% Discount for BIS
20.1(Stability and mechanical hazards)	-	100	15% Discount for BIS
21.2(Mechanical strength)	-	100	15% Discount for BIS
21.3(Mechanical strength)	-	100	15% Discount for BIS
22.5(Construction)	-	100	15% Discount for BIS
22.6(Construction)	-	100	15% Discount for BIS
22.11(Construction)	-	100	15% Discount for BIS
22.16(Construction)	-	100	15% Discount for BIS
22.32(Construction)	-	100	15% Discount for BIS
22.42(Construction)	-	100	15% Discount for BIS
23.3(Internal wiring)	-	100	15% Discount for BIS
25(Supply connection and external flexible cords)	-	100	15% Discount for BIS
25.7(Supply connection and external flexible cords)	-	100	15% Discount for BIS
25.14(Supply connection and external flexible cords)	-	100	15% Discount for BIS
25.15(Supply connection and external flexible cords)	-	100	15% Discount for BIS
26.5(Terminals for external conductors)	-	100	15% Discount for BIS
27.5(Provision for earthing)	-	100	15% Discount for BIS
28.1(Screws and connections)	-	100	15% Discount for BIS
B.22.1(Construction)	-	100	15% Discount for BIS
B.22.3(Construction)	-	100	15% Discount for BIS
B.22.4(Construction)	-	100	15% Discount for BIS
B.22.5(Construction)	-	100	15% Discount for BIS

31 Dec, 2026

-
Included w.e.f 01.01.2025 Exclusion : Cl 19.11.4.1- Cl 19.11.4.7(EMI/EMC) , Cl 24 (Components)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	100	15% Discount to BIS
7(Marking/ Marking & Instructions)	-	200	15% Discount to BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	15% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	200	15% Discount to BIS
10(Power Input & Current)	-	500	15% Discount to BIS
11(Temperature Rise/Heating)	-	1000	15% Discount to BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	15% Discount to BIS
14(Transient Over Voltage)	-	1000	15% Discount to BIS
15(Moisture Resistance)	-	4000	15% Discount to BIS
16(Leakage Current and Electric Strength)	-	500	15% Discount to BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	15% Discount to BIS
18(Endurance)	-	500	15% Discount to BIS
19(Abnormal Operation)	-	1000	15% Discount to BIS
20(Stability & Mechanical Hazards)	-	500	15% Discount to BIS
21(Mechanical strength)	-	500	15% Discount to BIS
22(Construction)	-	1000	15% Discount to BIS
23(Internal wiring)	-	500	15% Discount to BIS
24(Component)	-	1000	15% Discount to BIS
25(Supply Connection & External Flexible Cables and Cords)	-	500	15% Discount to BIS
26(Terminals For External Conductors)	-	500	15% Discount to BIS
27(Provision For Earthing)	-	500	15% Discount to BIS
28(Screws & Connection)	-	500	15% Discount to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	500	15% Discount to BIS
30(Resistance to Heat & Fire)	-	1000	15% Discount to BIS
31(Resistance to Rusting)	-	1000	15% Discount to BIS
32(Radiation ,Toxicity and similar hazards)	-	500	15% Discount to BIS
22.32(CONSTRUCTION)	-	500	15% Discount to BIS
6(Classification)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	0	-
11(Temperature Rise/Heating)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connection)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
22.32(CONSTRUCTION)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.01.2025 Exclusion : Cl 19.11.4.1 (Electrostatic discharges), Cl 19.11.4.2 (Radiated fields), Cl 19.11.4.3 (Fast transient bursts), Cl 19.11.4.4 (Surge immunity test), Cl 19.11.4.5 (Immunity to conducted discharges) , Cl 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl 19.11.4.7 (Harmonics) and Cl 24 (Component)

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	25000	10% Discount for BIS
7.1, 7.2(Charging Procedure for Test Purpose)	-	25000	10% Discount for BIS
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	25000	10% Discount for BIS
7.3.2("Discharge Performance at -20°C ")	-	25000	10% Discount for BIS
7.3.3(High Rate Discharge Performance at 20°C)	-	25000	10% Discount for BIS
7.4(Charge (capacity) Retention and Recovery)	-	25000	10% Discount for BIS
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	25000	10% Discount for BIS
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	25000	10% Discount for BIS
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	25000	10% Discount for BIS
7.7(Battery Internal Resistance)	-	25000	10% Discount for BIS

31 Dec, 2026

-
Included.w.e.f.06.12.2024 Exclusion CL 7.8 (Electrostatic Discharge (ESD))

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

345000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	2000	10% discount to BIS
Cl-4.2(Secondary Cells and Batteries)	-	2000	10% discount to BIS
Cl-4.3(General Operating Conditions)	-	2000	10% discount to BIS
Cl-4.3.8(Storage)	-	3000	10% discount to BIS
Cl-4.3.9(Operating Temperature)	-	3000	10% discount to BIS
Cl-5.1(Mechanical Endurance)	-	3000	10% discount to BIS
Cl-5.2(Charge Efficiency)	-	2000	10% discount to BIS
Cl-5.3(Deep Discharge Protection)	-	2000	10% discount to BIS
Cl-5.4(Marking)	-	2000	10% discount to BIS
Cl-5.5(Safety)	-	2000	10% discount to BIS
Cl-5.6(Documentation)	-	2000	10% discount to BIS
Cl-6(Functional characteristice)	-	2000	10% discount to BIS
Cl-7(General test conditions)	-	2000	10% discount to BIS
Cl-8.1(Capacity Test)	-	20000	10% discount to BIS
Cl-8.2(Endurance Test)	-	111000	10% discount to BIS
Cl-8.3(Charge Retention Test)	-	30000	10% discount to BIS
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	100000	10% discount to BIS
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	25000	10% discount to BIS
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	25000	10% discount to BIS
Cl-9.1(Type Tests)	-	2500	10% discount to BIS
Cl-9.2(Acceptance Test)	-	2500	10% discount to BIS
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	20000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f.05.11.2024

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
5(General conditions for the tests)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
6(Classification)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
7(Marking and instructions)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
8(Protection against access to live parts)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
9(Starting of motor-operated appliances)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
10(Power input and current)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
11(Heating)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
13(Leakage current and electric strength at operating temperature)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
14(Transient overvoltages)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
15(Moisture resistance)	-	3000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
16(Leakage current and electric strength)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
17(Overload protection of transformers and associated circuits)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
18(Endurance)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19(Abnormal operation)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.1(Electrostatic discharges)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.2(Radiated fields)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.3(Fast transient bursts)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.4(Surge immunity test)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.5(Immunity to conducted discharges)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.7(Harmonics)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
20(Stability and mechanical hazards)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
21(Mechanical strength)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
22(Construction)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
23(Internal wiring)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
24(Components)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
25(Supply connection and external flexible cords)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
26(Terminals for external conductors)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
27(Provision for earthing)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
28(Screws and connections)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
29(Clearances, creepage distances and solid insulation)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
30(Resistance to heat and fire)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
31(Resistance to rusting)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
32(Radiation, toxicity and similar hazards)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
A.101(Pressure test)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
4(General requirement)	-	0	NIL
5(General conditions for the tests)	-	0	NIL
6(Classification)	-	0	NIL
7(Marking and instructions)	-	0	NIL
8(Protection against access to live parts)	-	0	NIL
9(Starting of motor-operated appliances)	-	0	NIL
10(Power input and current)	-	0	NIL
11(Heating)	-	0	NIL
13(Leakage current and electric strength at operating temperature)	-	0	NIL
14(Transient overvoltages)	-	0	NIL
15(Moisture resistance)	-	0	NIL
16(Leakage current and electric strength)	-	0	NIL
17(Overload protection of transformers and associated circuits)	-	0	NIL
18(Endurance)	-	0	NIL
19(Abnormal operation)	-	0	NIL
20(Stability and mechanical hazards)	-	0	NIL
21(Mechanical strength)	-	0	NIL
22(Construction)	-	0	NIL
23(Internal wiring)	-	0	NIL
24(Components)	-	0	NIL
25(Supply connection and external flexible cords)	-	0	NIL
26(Terminals for external conductors)	-	0	NIL
27(Provision for earthing)	-	0	NIL
28(Screws and connections)	-	0	NIL
29(Clearances, creepage distances and solid insulation)	-	0	NIL
30(Resistance to heat and fire)	-	0	NIL
31(Resistance to rusting)	-	0	NIL
A.101(Pressure test)	-	0	NIL
12(Charging of metal-ion batteries)	-	0	NIL
32(Radiation, toxicity and similar hazards)	-	0	NIL

31 Dec, 2026

-
Included w.e.f.05.11.2024 Exclusion 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

35000 View breakup
Rs.35000/-(15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 to 7.13, 7.15, 7.16(Marking)	-	100	15% DISCOUNT FOR BIS
7.14(Legibility & Durability of Markings test)	-	100	15% DISCOUNT FOR BIS
7.1 to 7.13, 7.15, 7.16(Marking)	-	100	15% DISCOUNT FOR BIS
7.14(Legibility & Durability of Markings test)	-	100	15% DISCOUNT FOR BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	500	15% DISCOUNT FOR BIS
8.1.2(Protection against access to live parts)	-	500	15% DISCOUNT FOR BIS
8.1.3(Protection against access to live parts)	-	500	15% DISCOUNT FOR BIS
8.1.4(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
8.1.5(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
8.1.2(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
8.1.3(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
8.1.4(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
8.1.5(Protection against access to live parts)	-	200	15% DISCOUNT FOR BIS
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	15% DISCOUNT FOR BIS
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	15% DISCOUNT FOR BIS
11.1 to 11.8, Table No.-3(Heating)	-	3000	15% DISCOUNT FOR BIS
11.1 to 11.8, Table No.-3(Heating)	-	3000	15% DISCOUNT FOR BIS
13.1, 13.2(Leakage current test)	-	3000	15% DISCOUNT FOR BIS
13.3 and Table No.- 4(Electric strength test)	-	3000	15% DISCOUNT FOR BIS
13.1, 13.2(Leakage current test)	-	3000	15% DISCOUNT FOR BIS
13.3 and Table No.- 4(Electric strength test)	-	3000	15% DISCOUNT FOR BIS
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	4000	15% DISCOUNT FOR BIS
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	200	15% DISCOUNT FOR BIS
15.1(Moisture resistance)	-	3000	15% DISCOUNT FOR BIS
15.2(Moisture resistance)	-	3000	15% DISCOUNT FOR BIS
15.3(Moisture resistance)	-	200	15% DISCOUNT FOR BIS
15.101(Moisture resistance)	-	200	15% DISCOUNT FOR BIS
15.102(Moisture resistance)	-	500	15% DISCOUNT FOR BIS
15.102(Moisture resistance)	-	500	15% DISCOUNT FOR BIS
15.1(Moisture resistance)	-	2000	15% DISCOUNT FOR BIS
15.2(Moisture resistance)	-	1000	15% DISCOUNT FOR BIS
15.3(Moisture resistance)	-	2000	15% DISCOUNT FOR BIS
15.101(Moisture resistance)	-	1000	15% DISCOUNT FOR BIS
15.102(Moisture resistance)	-	500	15% DISCOUNT FOR BIS
15.102(Moisture resistance)	-	500	15% DISCOUNT FOR BIS
16.1 & 16.2(Leakage current test)	-	1000	15% DISCOUNT FOR BIS
16.3(Electric strength test)	-	1000	15% DISCOUNT FOR BIS
16.3(Insulation resistance test)	-	200	15% DISCOUNT FOR BIS
16.1 & 16.2(Leakage current test)	-	200	15% DISCOUNT FOR BIS
16.3(Electric strength test)	-	1000	15% DISCOUNT FOR BIS
16.3(Insulation resistance test)	-	200	15% DISCOUNT FOR BIS
17(Overload protection of transformers and associated circuits)	-	500	15% DISCOUNT FOR BIS
17(Overload protection of transformers and associated circuits)	-	500	15% DISCOUNT FOR BIS
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	15% DISCOUNT FOR BIS
19.101 and 19.102(ABNORMAL OPERATION)	-	500	15% DISCOUNT FOR BIS
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	500	15% DISCOUNT FOR BIS
19.101 and 19.102(ABNORMAL OPERATION)	-	500	15% DISCOUNT FOR BIS
19.11.4.1(Electrostatic discharges)	-	1000	15% DISCOUNT FOR BIS
19.11.4.2(Radiated fields)	-	500	15% DISCOUNT FOR BIS
19.11.4.3(Fast transient bursts)	-	1000	15% DISCOUNT FOR BIS
19.11.4.4(Surge immunity test)	-	1000	15% DISCOUNT FOR BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	15% DISCOUNT FOR BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	15% DISCOUNT FOR BIS
19.11.4.7(Harmonics)	-	500	15% DISCOUNT FOR BIS
20.1(Stability and mechanical hazards)	-	200	15% DISCOUNT FOR BIS
20.2(Stability and mechanical hazards)	-	200	15% DISCOUNT FOR BIS
20.1(Stability and mechanical hazards)	-	200	15% DISCOUNT FOR BIS
20.2(Stability and mechanical hazards)	-	200	15% DISCOUNT FOR BIS
21.1(MECHANICAL STRENGTH)	-	200	15% DISCOUNT FOR BIS
21.2(MECHANICAL STRENGTH)	-	200	15% DISCOUNT FOR BIS
21.1(MECHANICAL STRENGTH)	-	200	15% DISCOUNT FOR BIS
21.2(MECHANICAL STRENGTH)	-	200	15% DISCOUNT FOR BIS
22.1(Constructions)	-	200	15% DISCOUNT FOR BIS
22.2(Constructions)	-	200	15% DISCOUNT FOR BIS
22.3(Constructions)	-	200	15% DISCOUNT FOR BIS
22.4(Constructions)	-	200	15% DISCOUNT FOR BIS
22.5(Constructions)	-	200	15% DISCOUNT FOR BIS
22.6(Constructions)	-	200	15% DISCOUNT FOR BIS
22.7 to 22.10(Constructions)	-	200	15% DISCOUNT FOR BIS
22.11(Constructions)	-	200	15% DISCOUNT FOR BIS
22.11(Constructions)	-	200	15% DISCOUNT FOR BIS
22.12(Constructions)	-	200	15% DISCOUNT FOR BIS
22.13 to 22.48(Constructions)	-	200	15% DISCOUNT FOR BIS
22.101 to 22.114(Constructions)	-	200	15% DISCOUNT FOR BIS
22.1(Constructions)	-	200	15% DISCOUNT FOR BIS
22.2(Constructions)	-	200	15% DISCOUNT FOR BIS
22.3(Constructions)	-	200	15% DISCOUNT FOR BIS
22.4(Constructions)	-	200	15% DISCOUNT FOR BIS
22.5(Constructions)	-	200	15% DISCOUNT FOR BIS
22.6(Constructions)	-	200	15% DISCOUNT FOR BIS
22.7 to 22.10(Constructions)	-	200	15% DISCOUNT FOR BIS
22.11(Constructions)	-	200	15% DISCOUNT FOR BIS
22.11(Constructions)	-	100	15% DISCOUNT FOR BIS
22.12(Constructions)	-	100	15% DISCOUNT FOR BIS
22.13 to 22.48(Constructions)	-	100	15% DISCOUNT FOR BIS
22.101 to 22.114(Constructions)	-	100	15% DISCOUNT FOR BIS
23.1 & 23.2(Internal wiring)	-	100	15% DISCOUNT FOR BIS
23.3(Internal wiring)	-	400	15% DISCOUNT FOR BIS
23.4(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.5(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.6 to 23.10(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.101 to 23.102(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.1 & 23.2(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.3(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.4(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.5(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.6 to 23.10(Internal wiring)	-	200	15% DISCOUNT FOR BIS
23.101 to 23.102(Internal wiring)	-	500	15% DISCOUNT FOR BIS
24.1(Components)	-	1000	15% DISCOUNT FOR BIS
24.2 to 24.6(Components)	-	500	15% DISCOUNT FOR BIS
24.101 to 24.103(Components)	-	500	15% DISCOUNT FOR BIS
24.1(Components)	-	200	15% DISCOUNT FOR BIS
24.2 to 24.6(Components)	-	200	15% DISCOUNT FOR BIS
24.101 to 24.103(Components)	-	200	15% DISCOUNT FOR BIS
25.1(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.2(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.3(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.4(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.5 to 25.7(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.8, Table No.-11(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.9 to 25.13(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.14(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.15(Supply connection and external flexible cords)	-	500	15% DISCOUNT FOR BIS
25.16 to 25.25(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.1(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.2(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.3(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.4(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.5 to 25.7(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.8, Table No.-11(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.9 to 25.13(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.14(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.15(Supply connection and external flexible cords)	-	200	15% DISCOUNT FOR BIS
25.16 to 25.25(Supply connection and external flexible cords)	-	400	15% DISCOUNT FOR BIS
26.1 to 26.8(Terminals for external conductors)	-	400	15% DISCOUNT FOR BIS
26.9(Terminals for external conductors)	-	200	15% DISCOUNT FOR BIS
26.10 & 26.11(Terminals for external conductors)	-	200	15% DISCOUNT FOR BIS
26.1 to 26.8(Terminals for external conductors)	-	200	15% DISCOUNT FOR BIS
26.9(Terminals for external conductors)	-	200	15% DISCOUNT FOR BIS
26.10 & 26.11(Terminals for external conductors)	-	200	15% DISCOUNT FOR BIS
27.1 to 27.4(Provision for earthing)	-	4000	15% DISCOUNT FOR BIS
27.5(Provision for earthing)	-	2000	15% DISCOUNT FOR BIS
27.1 to 27.4(Provision for earthing)	-	1000	15% DISCOUNT FOR BIS
27.5(Provision for earthing)	-	200	15% DISCOUNT FOR BIS
27.6(Provision for earthing)	-	200	15% DISCOUNT FOR BIS
28.1, Table No.-14(Screws and connections)	-	1000	15% DISCOUNT FOR BIS
28.2 to 28.4(Screws and connections)	-	500	15% DISCOUNT FOR BIS
28.1, Table No.-14(Screws and connections)	-	500	15% DISCOUNT FOR BIS
28.2 to 28.4(Screws and connections)	-	500	15% DISCOUNT FOR BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	15% DISCOUNT FOR BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	15% DISCOUNT FOR BIS
29.2(Clearances, creepage distances and solid insulation)	-	500	15% DISCOUNT FOR BIS
29.3(Clearances, creepage distances and solid insulation)	-	200	15% DISCOUNT FOR BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	15% DISCOUNT FOR BIS
29.2(Clearances, creepage distances and solid insulation)	-	200	15% DISCOUNT FOR BIS
29.2(Clearances, creepage distances and solid insulation)	-	200	15% DISCOUNT FOR BIS
29.3(Clearances, creepage distances and solid insulation)	-	200	15% DISCOUNT FOR BIS
30.1(Resistance to heat and fire)	-	2000	15% DISCOUNT FOR BIS
30.2(Resistance to heat and fire)	-	200	15% DISCOUNT FOR BIS
30.2.4(Resistance to heat and fire)	-	200	15% DISCOUNT FOR BIS
30.1(Resistance to heat and fire)	-	2000	15% DISCOUNT FOR BIS
30.2(Resistance to heat and fire)	-	200	15% DISCOUNT FOR BIS
30.2.4(Resistance to heat and fire)	-	1000	15% DISCOUNT FOR BIS
31(Resistance to rusting)	-	1000	15% DISCOUNT FOR BIS
31(Resistance to rusting)	-	200	15% DISCOUNT FOR BIS
32(Radiation, toxicity and similar hazards)	-	500	15% DISCOUNT FOR BIS
32(Radiation, toxicity and similar hazards)	-	500	15% DISCOUNT FOR BIS
29.2(Clearances, creepage distances and solid insulation)	-	200	15% DISCOUNT FOR BIS
27.6(Provision for earthing)	-	200	15% DISCOUNT FOR BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	15% DISCOUNT FOR BIS

31 Dec, 2026

-
-

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	NIL
Cl-5(General notes on tests)	-	100	NIL
Cl-6(Rating)	-	100	NIL
Cl-7(Classification)	-	100	NIL
Cl-8(Marking)	-	100	NIL
Cl-9(Checking of dimensions)	-	100	NIL
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	200	NIL
Cl-10.3(Requirements for Accessible Metal Parts)	-	200	NIL
Cl-10.4(Requirements for Insulation of the Mechanism)	-	200	NIL
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	200	NIL
Cl-10.6(Requirements for Switches Operated Indirectly)	-	200	NIL
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	200	NIL
Cl-11(Provision for earthing)	-	200	NIL
Cl-12(Terminals)	-	200	NIL
Cl-13(Constructional requirements)	-	200	NIL
Cl-14(Mechanism)	-	200	NIL
Cl-15.1(Resistance to Ageing)	-	1000	NIL
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	NIL
Cl-15.3(Resistance to Humidity)	-	1000	NIL
Cl-16.1(General)	-	100	NIL
Cl-16.2(Test for Measuring the Insulation Resistance)	-	100	NIL
Cl-16.3(Electric Strength Test)	-	300	NIL
Cl-17(Temperature rise)	-	1000	NIL
Cl-18(Making and breaking capacity)	-	100	NIL
Cl-19(Normal operation)	-	1500	NIL
Cl-20(Mechanical strength)	-	500	NIL
Cl-21(Resistance to heat)	-	500	NIL
Cl-22(Screws, current carrying parts and connections)	-	200	NIL
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	100	NIL
Cl-24.1(Resistance to abnormal heat and fire)	-	500	NIL
Cl-24.2(Resistance to tracking)	-	500	NIL
Cl-25(Resistance to rusting)	-	500	NIL
Cl-4(General Requirements)	-	0	NIL
Cl-5(General notes on tests)	-	0	NIL
Cl-6(Rating)	-	0	NIL
Cl-7(Classification)	-	0	NIL
Cl-8(Marking)	-	0	NIL
Cl-9(Checking of dimensions)	-	0	NIL
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	0	NIL
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	NIL
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	NIL
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	NIL
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	NIL
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	NIL
Cl-11(Provision for earthing)	-	0	NIL
Cl-12(Terminals)	-	0	NIL
Cl-13(Constructional requirements)	-	0	NIL
Cl-14(Mechanism)	-	0	NIL
Cl-15.1(Resistance to Ageing)	-	0	NIL
Cl-15.2(Protection Provided by Enclosures of Switches)	-	0	NIL
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	0	NIL
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	NIL
Cl-16.3(Electric Strength Test)	-	0	NIL
Cl-17(Temperature rise)	-	0	NIL
Cl-18(Making and breaking capacity)	-	0	NIL
Cl-19(Normal operation)	-	0	NIL
Cl-20(Mechanical strength)	-	0	NIL
Cl-21(Resistance to heat)	-	0	NIL
Cl-22(Screws, current carrying parts and connections)	-	0	NIL
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	0	NIL
Cl-24.1(Resistance to abnormal heat and fire)	-	0	NIL
Cl-24.2(Resistance to tracking)	-	0	NIL
Cl-25(Resistance to rusting)	-	0	NIL
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	100	NIL
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	100	NIL
13.5(Attachment of knobs)	-	100	NIL
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	100	NIL
12.3.12(Table 13)(Deflection Test Forces)	-	100	NIL
19.1(Test for Switches Intended for Inductive Loads)	-	500	NIL

31 Dec, 2026

-
Included w.e.f. 13.06.2024

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.2(Message Readability)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.1(Inputting of text)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.2(Message Readability)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.1(Inputting of text)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.2(Message Readability)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.1(Inputting of text)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS
5.2(Message Readability)	-	10000	a) For BIS samples: 1.5 times of BIS testing charges b) For Others: Rs.10,000/- -15% discount to BIS

31 Dec, 2026

-
Included w.e.f. 01.12.2022.

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	10000		A) For BIS samples: 1.5 times of BIS testing charges B) For Others : Rs.20,000/- -15% discount to BIS
5.2(Message Readability)	-	10000		A) For BIS samples: 1.5 times of BIS testing charges B) For Others : Rs.20,000/- -15% discount to BIS

31 Dec, 2026

-
-

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs.60,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7(Verification)	-	500	15 % Discount to BIS
Cl.8(Verification)	-	500	15 % Discount to BIS
Cl.10(Verification)	-	1000	15 % Discount to BIS
Cl.11(Verification)	-	1000	15 % Discount to BIS
Cl.13(Verification)	-	1500	15 % Discount to BIS
Cl.14(Verification)	-	500	15 % Discount to BIS
Cl.15(Verification)	-	1500	15 % Discount to BIS
Cl. 16(Verification)	-	500	15 % Discount to BIS
Cl.17(Verification)	-	500	15 % Discount to BIS
Cl.19(Verification)	-	500	15 % Discount to BIS
Cl.20(Verification)	-	500	15 % Discount to BIS
Cl.21(Verification)	-	500	15 % Discount to BIS
Cl.22(Verification)	-	500	15 % Discount to BIS
Cl.23(Verification)	-	500	15 % Discount to BIS
Cl.24(Verification)	-	500	15 % Discount to BIS
Cl.25(Verification)	-	500	15 % Discount to BIS
Cl.26(Verification)	-	500	15 % Discount to BIS
Cl.27(Verification)	-	500	15 % Discount to BIS
Cl.28(Verification)	-	500	15 % Discount to BIS
CL.29(Verification)	-	500	15 % Discount to BIS
Cl.30(Verification)	-	1000	15 % Discount to BIS
Cl.31(Verification)	-	500	15 % Discount to BIS
Cl.32(Verification)	-	500	15 % Discount to BIS

31 Dec, 2026

-
REVISED STANDARD INCLUDED FOR IS 302-2-35:2017 W.E.F. 10-09-2020.

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	15 % Discount to BIS
7.0(Marking and Instructions)	-	500	15 % Discount to BIS
8.0(Protection against access to live parts)	-	500	15 % Discount to BIS
10.0(Input and Current)	-	1000	15 % Discount to BIS
11.0(Heating)	-	1000	15 % Discount to BIS
13.0(Leakage Current and electric strength at operating temperature)	-	1500	15 % Discount to BIS
14.0(Transient Overvoltage)	-	500	15 % Discount to BIS
15.0(Moisture resistance)	-	1500	15 % Discount to BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	15 % Discount to BIS
17.0(Overload Protection of transformer and associated circuit)	-	500	15 % Discount to BIS
19.0(Abnormal Operation)	-	500	15 % Discount to BIS
20.0(Stability and mechanical hazards)	-	500	15 % Discount to BIS
21.0(Mechanical Strength)	-	500	15 % Discount to BIS
22.0(Construction)	-	500	15 % Discount to BIS
23.0(Internal Wiring)	-	500	15 % Discount to BIS
25.0(Supply Connection and External Flexible Cords)	-	500	15 % Discount to BIS
26.0(Terminals for external conductors)	-	500	15 % Discount to BIS
27.0(Provision For Earthing)	-	500	15 % Discount to BIS
28.0(Screws and Connections)	-	500	15 % Discount to BIS
29.0(Creepage Distances and Clearances)	-	500	15 % Discount to BIS
30.0(Resistance To Heat and Fire)	-	1000	15 % Discount to BIS
31.0(Resistance To Rusting)	-	500	15 % Discount to BIS

31 Dec, 2026

-
REVISED STANDARD INCLUDED FOR IS 302-2-21:2018 W.E.F. 10-09-2020.

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

15000 View breakup
Rs. 15000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.0(Measurement of Heating up time)	-	2000	15% discount to BIS
11.0(Measurement of sole plate temperature)	-	2000	15% discount to BIS
12.0(Measurement of Tempearture Distribution)	-	2000	15% discount to BIS
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	500	15% discount to BIS
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	500	15% discount to BIS
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	15% discount to BIS
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	1000	15% discount to BIS
16.0(Measurement of Thermostatic staibility)	-	500	15% discount to BIS
16.0(Measurement of Thermostatic staibility)	-	500	15% discount to BIS
16.0(Measurement of Thermostatic staibility)	-	500	15% discount to BIS
16.0(Measurement of Thermostatic staibility)	-	500	15% discount to BIS
16.0(Measurement of Thermostatic staibility)	-	500	15% discount to BIS
16.0(Measurement of Thermostatic staibility)	-	500	15% discount to BIS
17(Measurement of Thermostatic staibility)	-	0	15% discount to BIS
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	250	15% discount to BIS
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	250	15% discount to BIS
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	500	15% discount to BIS
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	15% discount to BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	2500	15% discount to BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	2500	15% discount to BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	2500	15% discount to BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	2500	15% discount to BIS
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	250	15% discount to BIS
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	250	15% discount to BIS
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	500	15% discount to BIS
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	750	15% discount to BIS
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	750	15% discount to BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	500	15% discount to BIS
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	500	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	75	15% discount to BIS
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	500	15% discount to BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	125	15% discount to BIS
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	250	15% discount to BIS
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	250	15% discount to BIS
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	250	15% discount to BIS
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	250	15% discount to BIS
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	1000	15% discount to BIS
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	500	15% discount to BIS
10.0(Measurement of Heating up time)	-	-	-
11.0(Measurement of sole plate temperature)	-	-	-
11.0(Measurement of sole plate temperature)	-	-	-
11.0(Measurement of sole plate temperature)	-	-	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	-	-

31 Dec, 2026

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
Rs.60,000/- for Laptop/ notebook/ tablet, Printer & Plotters, Scanner, Power adaptor for IT equipments, Automatic data processing machine, Mobile phones and Mail processing machine/ postage machine/ Franking machine. Rs.52,500/- for Point of sale terminal, Copying machine/ duplicators, Passport Readers and Power bank for use in portable applications. Rs.45,000/- for Set Top Box, Telephone answering machine, Cash Registers and Smart card readers. Rs.40,000/- for Wireless Keyboard, Rs.50,000/- For VDU, Video Monitors of screen size up to 55” & Rs.60,000/- For upto 110", CCTV Cameras/ CCTV Recorder, USB driven Barcode Reader, Barcode scanner, Iris scanners, Optical Fingerprint scanner Rs.55,000/- Smart Watches Rs.35,000/- Keyboard, • Rs.45,000/- Automatic Teller Cash Dispensing Machines, Rs.35,000/- USB Type External Hard Disk Drive, Rs.35,000/- USB Type External Solid - State Storage Devices (above 256 GB Capacity), Rs.45,000/- Standalone Switch Mode Power Supplies (SMPS) with output voltage 48 V (max) . ADDITONAL PRODUCTS FOR PHASE V INCLUDED W.E.F. 19-11-2020: Rs.35,000/- for Digital Camera

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	15 % Discount to BIS
1.6(Power interface .)	-	2000	15 % Discount to BIS
1.7(Markings and instructions)	-	500	15 % Discount to BIS
2.1(Protection from electric shock and energy hazards)	-	4500	15 % Discount to BIS
2.2(SELV circuits)	-	2000	15 % Discount to BIS
2.3(TNV circuits)	-	1000	15 % Discount to BIS
2.4(Limited current circuits)	-	2000	15 % Discount to BIS
2.5(Limited power sources .)	-	2000	15 % Discount to BIS
2.6(Provisions for earthing and bonding)	-	2000	15 % Discount to BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	15 % Discount to BIS
2.8(Safety interlocks)	-	1000	15 % Discount to BIS
2.9(Electrical insulation)	-	3000	15 % Discount to BIS
2.10(Clearances, creepage distances and distances through insulation)	-	1000	15 % Discount to BIS
3.1(General)	-	1000	15 % Discount to BIS
3.2(Connection to a mains supply)	-	1000	15 % Discount to BIS
3.3(Wiring terminals for connection of external conductors)	-	1000	15 % Discount to BIS
3.4(Disconnection from the mains supply)	-	500	15 % Discount to BIS
3.5(Interconnection of equipment)	-	500	15 % Discount to BIS
4.1(Stability)	-	500	15 % Discount to BIS
4.2(Mechanical strength)	-	4000	15 % Discount to BIS
4.3(Design and construction)	-	4000	15 % Discount to BIS
4.4(Protection against hazardous moving parts)	-	2000	15 % Discount to BIS
4.5(Thermal requirements)	-	3000	15 % Discount to BIS
4.6(Openings in enclosures)	-	500	15 % Discount to BIS
4.7(Resistance to fire)	-	5000	15 % Discount to BIS
5.1(Touch current and protective conductor curren)	-	2000	15 % Discount to BIS
5.2(Electric strength)	-	2000	15 % Discount to BIS
5.3(Abnormal operating and fault conditions)	-	5000	15 % Discount to BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	15 % Discount to BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	15 % Discount to BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	500	15 % Discount to BIS
7.1(General)	-	500	15 % Discount to BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	15 % Discount to BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	15 % Discount to BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	15 % Discount to BIS

31 Dec, 2026

-
Excluding: Capacitor Bridging Insulation (Cl.1.5.6), Resistor Bridging Insulation (Cl.1.5.7), Surge Suppressor (Cl.1.5.9), Mechanical strength of Cathode Ray Tube (Cl.4.2.8), Flammable Liquid (Cl.4.3.12), Effect of UV Radiation on materials (Cl.4.3.13.3), Human exposure to UV radiation (Cl.4.3.13.4) & Effect of lasers (including LED) (Cl.4.3.13.5). Additional Products/ Test Facility included w.e.f. 18.07.2018. For rating up to 300V, 1Φ, AC

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

50000 View breakup
Rs.40,000/- for Electronic games (Video), Rs.50,000/- for Amplifiers with input power 2000W and above, Rs.60,000/- Power adopters for audio, video & similar electronic apparatus. Additional Products/Test Facility Included: Rs.50,000/- For Plasma/ LCD/ LED TV of screen size up to 110”, Optical Disc Players with built in amplifiers of input power 200W and above up to 1600W, Electronic Musical System with input power 200W and above up to 1600W. Rs.35,000/- Wireless Headphone and Earphone, Rs.35,000/- Electronic Musical System with input power below 200 Watts, Rs.35,000/- Television other than Plasma/LCD/LED TVs. ADDITONAL PRODUCTS FOR PHASE V INCLUDED W.E.F. 19-11-2020: Rs. 35,000/- for Wireless Microphone, Webcam (Finished Products), Smart Speaker (With and without display), Bluetooth Speakers. Rs. 45,000/- for Video Camera. [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	1000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
7(Heating under normal operating conditions)	-	5000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	8000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
9(Electric shock hazard under normal operating conditions)	-	5000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
10(Insulation requirements)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
11(Fault conditions)	-	4000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
12(Mechanical strength)	-	8000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
15(TERMINALS)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
16(External flexible cords)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
17(Electrical connections and mechanical fixings)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
19(Stability and mechanical hazards)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
20(Resistance to fire)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
6(Hazardous radiations)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS
14(Components)	-	2000	Rs.40,000/- Electronic game(Video), Amplifiers with Input power 2000W and above Rs.35,000/- Wireless Headphone and Earphone, Electronic Musical System with input power below 200 Watts, Television other than Plasma/LCD/LED TVs 15 % Discount to BIS

31 Dec, 2026

-
REVISED VERSION OF IS 616:17 INCLUDED. Excluding: Laser radiation (Cl.6.2); Leaser Radiation Chamber, Emission meter, Spectrum meter, Mechanical Safety, Interlock Test Apparatus, Components (Cl.14), Mechanical strength of picture tube & protection against the effects of implosion (Cl.18). Additional Products/ Test Facility included w.e.f. 18.07.2018. For rating up to 300V, 1Φ, AC. EXCEPT TELEVISION WITH CRT.

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

331000 View breakup
Rs.3,31,000/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Marking)	-	9999.99	10% discount to BIS
4(Condition of use)	-	40000	10% discount to BIS
5.1(Mechanical Endurance)	-	20000	10% discount to BIS
5.2(Charge efficiency)	-	30000	10% discount to BIS
5.3(Deep discharge protection)	-	10000	10% discount to BIS
5.5(Dafety)	-	10000	10% discount to BIS
5.6(Documentation)	-	10000	10% discount to BIS
6(Finctional Characteristics)	-	4999.98	10% discount to BIS
7(General test conditions)	-	5000	10% discount to BIS
8.1(Capacity test)	-	15000	10% discount to BIS
8.2(Endurance test)	-	20000	10% discount to BIS
8.3(Charge retention test)	-	15000	10% discount to BIS
8.4(Cycle endurance in Photovoltaic application)	-	20000	10% discount to BIS
8.5(Sulphation Test)	-	40000	10% discount to BIS
8.6(Water loss test)	-	40000	10% discount to BIS
8.7(Non spillability)	-	30000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 24-07-2020.Except Flooded Lead Acid Batteries.

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

190500 View breakup
Rs.1,90,500/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14(Components)	-	10000	Test is in Inclusion
4(General Test Requireements)	-	40000	10% Discount to BIS
5(Marking and documentation)	-	5000	10% Discount to BIS
6(Environmental requirements and conditions)	-	50000	10% Discount to BIS
7(Protection against electric shock and energy hazards)	-	30000	10% Discount to BIS
9(Protection against Fire Hazards)	-	10000	10% Discount to BIS
11(Protection against Liquid Hazards)	-	10000	10% Discount to BIS
13(Physical Requirements)	-	10000	10% Discount to BIS
8(Protection against Mechanical Hazards)	-	10000	10% Discount to BIS
10(Protection against Sonic Pressure Hazards)	-	10000	10% Discount to BIS
12(Protection against Chemical Hazards)	-	10000	10% Discount to BIS

31 Dec, 2026

-
Excluding: Cl.10.2-Protection against sonic Pressure hazards, Cl.13.6.4-UV resistance, Cl.14 –Component. Included w.e.f. 24-07-2020.

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

75000 View breakup
Rs.75,000/- [15% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	500	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
4.6(Power interface)	-	10000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
4.7(Marking & instructions)	-	1000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.1(Protection against shock and energy hazards)	-	7000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.2(Requirement of auxiliary circuits)	-	1000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.3(Protective earthing and bonding)	-	8000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.4(AC and DC power isolation)	-	7500	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.5(Over current and earth fault condition)	-	3000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.6(Safety interlocks)	-	1000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
6.1(Wiring, connections and supply)	-	2000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
6.2(Connection to power)	-	1500	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
6.3(Wiring terminals for external power conductors)	-	2000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
7.1(Enclosure)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.2(STABILITY)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.3(MECHANICAL STRENGTH)	-	4000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.4(Construction details)	-	500	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.5(Resistance to fire)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.6(Battery location)	-	1000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.7(Temperature rise)	-	3000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
8.1(General procision for earth leakage)	-	3000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
8.2(Electric Strength)	-	4000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
8.3(Abnormal operating and fault conditions)	-	3000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
9.0(Connection to telecommunication networks)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS

31 Dec, 2026

-
Excluding: Capacitor Bridging Insulation (Cl.4.5 / RD 1.5.6), Resistor Bridging Insulation (Cl.4.5 / RD 1.5.7), Surge Suppressor (Cl.4.5 / RD 1.5.7), Ventilation of Battery Compartment (Cl. Annex-M). Non-linear loads (Cl.3.3.3, Annex-L.5). Additional Products/ Test Facility included w.e.f. 18.07.2018. For rating up to 300V, 1Φ, AC

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

60000 View breakup
Rs.60000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	100	-
5(General Safety Considerations)	-	100	-
5.1(General)	-	500	-
5.2(Insulation and Wiring)	-	1000	-
5.3(Venting)	-	499.99	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	100	-
5.8(Battery Safety Components)	-	100	-
6(Type Test and Sample Size)	-	500	-
7(Specific requirements and tests)	-	8000	-
7.1(Charging procedure for test purposes)	-	10000	-
7.2(Intended Use)	-	11000	-
7.3(Reasonably foreseeable misuse)	-	20000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	500	-
9.3(Caution for ingestion of small cells and batteries)	-	500	-
9.4(Other information)	-	1000	-
10(Packaging)	-	600	-

31 Dec, 2026

-
Revised version included w.e.f. 28.01.2019.

IS 16046 : Part 1 (2018)

60000 View breakup
Rs.60000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	15 % Discount to BIS
5(General Safety Considerations)	-	500	15 % Discount to BIS
5.1(General)	-	100	-
5.2(Insulation and Wiring)	-	1000	-
5.3(Venting)	-	100	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	100	-
6(Tyoe Test amd Sample Size)	-	600	-
7(Specific requirements and tests)	-	5000	-
7.1(Charging procedure for test purposes)	-	8000	-
7.2(Intended Use)	-	14000	-
7.3(Reasonably foreseeable misuse)	-	20000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	500	-
9.3(Caution for ingestion of small cells and batteries)	-	500	-
9.4(Other information)	-	1000	-
10(Packaging)	-	600	-

31 Dec, 2026

-
Revised version included w.e.f. 28.01.2019.

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

18000 View breakup
Rs.18000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.10 of IS 8978 : 1992(Finish)	-	1000	15% discount to BIS
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	10000	15% discount to BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	7000	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	30	15% discount to BIS
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	30	15% discount to BIS
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	30	15% discount to BIS
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	30	15% discount to BIS
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	30	15% discount to BIS
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	30	15% discount to BIS
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	30	15% discount to BIS
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	30	15% discount to BIS
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	30	15% discount to BIS
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	30	15% discount to BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	2000	15% discount to BIS
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	2000	15% discount to BIS
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	667	15% discount to BIS
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	667	15% discount to BIS
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	667	15% discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	15% discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	1000	15% discount to BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	4000	15% discount to BIS
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	8000	15% discount to BIS
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	2000	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	400	15% discount to BIS
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	2000	15% discount to BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	15% discount to BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	15% discount to BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	84	15% discount to BIS
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	84	15% discount to BIS
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	84	15% discount to BIS
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	84	15% discount to BIS
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	84	15% discount to BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	84	15% discount to BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	84	15% discount to BIS
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	8415	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	84	15% discount to BIS
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	84	15% discount to BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	84	15% discount to BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	84	15% discount to BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	84	15% discount to BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	84	15% discount to BIS
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	84	15% discount to BIS
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	84	15% discount to BIS
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	84	15% discount to BIS
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	84	15% discount to BIS
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	84	15% discount to BIS
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	84	15% discount to BIS
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	84	15% discount to BIS
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	84	15% discount to BIS
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	84	15% discount to BIS
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	84	15% discount to BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	1000	15% discount to BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	1000	15% discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	2000	15% discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	223	15% discount to BIS
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	223	15% discount to BIS
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	223	15% discount to BIS
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	223	15% discount to BIS
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	223	15% discount to BIS
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	223	15% discount to BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	223	15% discount to BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	223	15% discount to BIS
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	223	15% discount to BI
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	2000	15% discount to BI
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	15% discount to BIS
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	500	15% discount to BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	15% discount to BIS
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1250	15% discount to BIS
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1250	15% discount to BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	1500	15% discount to BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	1500	15% discount to BIS
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	1000	15% discount to BIS

31 Dec, 2026

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	15% discount to BIS
7.1(Marking- IS 302-1)	-	100	15% discount to BIS
7.2(Marking)	-	100	15% discount to BIS
7.4(Marking)	-	100	15% discount to BIS
7.5(Marking)	-	100	15% discount to BIS
7.6(Marking)	-	100	15% discount to BIS
8( Protection Against Electric Shock, IS 302-1)	-	1000	15% discount to BIS
9(Starting, IS 302-1)	-	200	15% discount to BIS
10(Power Input and Current, IS 302-1)	-	1000	15% discount to BIS
11(Heating, IS 302-1)	-	1000	15% discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	750	15% discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	750	15% discount to BIS
14(Transient Over Voltages, IS 302-1)	-	100	15% discount to BIS
15.1(Moisture Resistance, IS 302-1)	-	250	15% discount to BIS
15.2(Moisture Resistance-Spillage test)	-	250	15% discount to BIS
15(Moisture Resistance, IS 302-1)	-	500	15% discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	15% discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	15% discount to BIS
19(Abnormal Operation, IS 302-1)	-	750	15% discount to BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	500	15% discount to BIS
21(Mechanical Strength, IS 302-1)	-	750	15% discount to BIS
22.1(Construction, IS 302-1)	-	100	15% discount to BIS
22.2(Construction)	-	100	15% discount to BIS
22.3(Construction)	-	100	15% discount to BIS
22.4(Construction)	-	100	15% discount to BIS
22.5(Construction)	-	100	15% discount to BIS
22.6(Construction)	-	100	15% discount to BIS
22.8(Construction)	-	100	15% discount to BIS
22.9(Construction)	-	100	15% discount to BIS
22.1(Construction)	-	500	15% discount to BIS
23(Internal Wiring, IS 302-1)	-	500	15% discount to BIS
24.1(Components, IS 302-1)	-	100	15% discount to BIS
24.2(Components)	-	100	15% discount to BIS
24.4(Components)	-	100	15% discount to BIS
24.5(Components)	-	100	15% discount to BIS
24.6(Components)	-	100	15% discount to BIS
24.7(Components)	-	100	15% discount to BIS
24.8(Components)	-	100	15% discount to BIS
24.9(Components)	-	100	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
26(Terminals for External Conductors, IS 302-1)	-	500	15% discount to BIS
27(Provision for Earthing, IS 302-1)	-	750	15% discount to BIS
28(Screws & Connections, IS 302-1)	-	500	15% discount to BIS
29(Clearances and Distances through Insulation, IS 302-1)	-	1000	15% discount to BIS
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	15% discount to BIS
31(Resistance of Rusting, IS 302-1)	-	1000	15% discount to BIS
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	150	15% discount to BIS
34.3(Whisking egg whites )	-	200	15% discount to BIS
34.4(IDLI batter-Grinding of black gram)	-	200	15% discount to BIS
34.4(IDLI batter-Grinding of rice)	-	200	15% discount to BIS
34.5.1 (a)(Operational test for juicers )	-	100	15% discount to BIS
34.5.1 (b)(Operational test for juicers )	-	250	15% discount to BIS
34.5.2(Operational test for juicers )	-	250	15% discount to BIS
35(Temperature withstand test for bowl)	-	250	15% discount to BIS
36(Test for controls )	-	750	15% discount to BIS
37(Strength of Assembly )	-	750	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

F-3, Sector - 6, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9871062220 testing@ursindia.com

Scope List

No Record Found