BIS - LIMS (Laboratory Information Management System)

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED

C-19, Sector -7, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9818494127 monika.ahuja@bureauveritas.com

Scope List

Reset

23 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10702 (2023)

Hawai Chappal-Specification

Footwear

41500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	200	-
4.2(Length)	-	300	-
4.3(Thickness)	-	300	-
4.4 , Table No. 1 , i)(Density)	-	400	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1500	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	900	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1650	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1650	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1650	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	400	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	1000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	300	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	300	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1650	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	45000	-
6(MARKING AND PACKING)	-	300	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1800	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1900	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	5500	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	450	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	5500	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
Cl.No. 5.2(lead content)	-	1200	-
Clause 4.1 - 4.1.1(Bottom Material)	-	200	-
Clause 4.1 - 4.1.2(Strap Material)	-	200	-
Clause 4.1 - 4.1.3(Material)	-	200	-
Clause 4.1 - 4.1.4(Material)	-	200	-
Clause 4.2(Material)	-	200	-
Clause 4.3 - 4.3.1(Thickness)	-	300	-
Clause 4.3 - 4.3.2(Thickness)	-	300	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	400	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	900	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1650	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	400	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	400	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	1000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	1000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	300	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	300	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	300	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	300	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	1000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	1000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1650	-
Cl-4 ((Amendment No-1)(Category And Type)	-	200	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1500	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	900	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1650	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1650	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	3500	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	45000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1200	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	1000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	1000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	1000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	1000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	1000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1650	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	450	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1200	-

Complete

31 Dec, 2026

-
Included w.e.f 06.02.2025

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

Footwear

45750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	200	-
Cl. No.5("SIZE AND FITTINGS ")	-	200	-
Cl. No.6("CONSTRUCTION ")	-	200	-
Cl. No.7(MATERIAL)	-	200	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	900	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	900	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1500	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	900	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	2025	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	900	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	2025	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	1200	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	400	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	1650	-
Cl. No.8.4,Table no. 5(i)(Density)	-	400	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1650	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1650	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1650	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1000	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1000	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1000	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1000	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1000	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	3500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1650	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	45000	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1800	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1900	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	5500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	450	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	5500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4299	-
Cl. No.8.6.2(Lead content)	-	1200	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1650	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	1000	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	1000	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	1000	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1650	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1650	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1650	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	0	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1200	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	900	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	900	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	900	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	2025	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	900	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	2025	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	1200	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	400	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1650	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	400	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	450	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	450	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-

Complete

31 Dec, 2026

-
Included w.e.f. 27.01.2025

IS 13995 (1995)

Unlined moulded rubber boots - Specification

Footwear

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	200	-
5.1.6(Design)	-	200	-
5.1.5(Flexing resistance of upper)	-	1500	-
5.1.4(Resistance to dry heat ageing )	-	2500	-
5.1.3(Tear Strength)	-	900	-
5.1.1(Tensile Strength (before ageing))	-	900	-
4.1(Thickness )	-	300	-
6, 6.1(Marking)	-	300	-
Cl.6, 6.1(Marking)	-	300	-
5.1.2(Tensile Strength (after ageing))	-	2700	-

Complete

31 Dec, 2026

-
Included w.e.f. 27.01.2025

IS 13893 (1994)

Polyurethane soles semirigid - specification

Footwear

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	3500	-
4.3(Ross Flex test)	-	1650	-
4.3(Flexural strength )	-	1650	-
4.3(Abrasion Resistance)	-	1650	-
4.3(Elongation at break)	-	0	-
4.3(Tensile Strength )	-	900	-
4.3(Hardness Shore(A))	-	400	-
4.3(Relative density )	-	400	-
4.2(Thickness )	-	300	-
4.1(Design)	-	200	-
5, 5.1, 5.2(Packing And Marking)	-	200	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	200	-
4.2 (Amendment 2)(Thickness)	-	300	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	400	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1650	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1650	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	3500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	900	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	0	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	900	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	400	-

Complete

31 Dec, 2026

-
Included.w.e.f.27.01.2025

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

Footwear

82500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	200	-
Cl-5(Design)	-	200	-
Cl-6(Size and Fittings)	-	200	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1650	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1050	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1650	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1050	-
Cl.7.1.3(Complete Shoe Flexing)	-	1500	-
Cl.7.1.5(Slip Resistance)	-	2500	-
Cl.7.1.6(Heel Drop)	-	300	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1500	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	900	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	550	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	1500	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	900	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	1500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	900	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	0	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	2025	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	900	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	1250	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1500	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	1500	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	3500	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	1500	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	1500	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	900	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	2025	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	550	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	1500	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	1500	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	900	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	1050	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	2025	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	1050	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	2500	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	1650	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1650	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	3500	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	900	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	900	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	0	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1500	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1500	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	900	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	2500	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	900	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	900	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1350	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1500	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	1500	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	1000	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	1000	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	1500	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	1000	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	1250	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	1250	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1800	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1900	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1800	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	450	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	5500	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
Cl-7.12.2(PVC is present in sports shoe)	-	1200	-
Cl- 8.1(Marking)	-	300	-
Cl-6(Size and Fittings)	-	-	-
Cl-5(Design)	-	-	-
Cl-6(Size and Fittings)	-	-	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	-	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	-	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	-	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	-	-
Cl.7.1.3(Complete Shoe Flexing)	-	-	-
Cl.7.1.5(Slip Resistance)	-	-	-
Cl.7.1.6(Heel Drop)	-	-	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	-	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	-	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	-	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	-	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	-	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	-	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	-	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	-	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	-	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	-	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	-	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	-	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	-	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	-	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	-	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	-	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	-	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	-	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	-	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	-	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	-	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	-	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	-	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	-	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	-	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	-	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	-	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	-	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	-	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	-	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	-	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	-	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	-	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	-	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	-	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	-	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	-	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	-	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	-	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	-	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	-	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	-	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	-	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	-	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	-	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	-	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	-	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	-	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	-	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	-	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	-	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	-	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	-	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	-	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	-	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	-	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	-	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Cl-7.12.2(PVC is present in sports shoe)	-	-	-
Cl- 8.1(Marking)	-	-	-

Complete

31 Dec, 2026

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 7.1.4 Washability

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

Footwear

62625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	0	-
5(DESIGN)	-	200	-
6(SIZE AND FITTINGS)	-	200	-
7.1.1(Whole Footwear)	-	0	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1650	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1650	-
7.1.5(Energy Absorption at Seat Region)	-	1050	-
7.1.6(Complete Shoe Flexing)	-	1500	-
7.1.8(Slip Resistance)	-	2500	-
7.1.9(Heel Drop)	-	300	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1500	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	900	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	550	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	1500	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	0	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	900	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1500	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	900	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	1050	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	2025	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	1000	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	900	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	1250	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1500	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	1500	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	0	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	3500	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	1500	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	1500	-
7.3 , Table No. 4 , i)(Tear strength,)	-	900	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	2025	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	550	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	500	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	1500	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	0	-
7.4 , Table No. 5 , i)(Thickness)	-	300	-
7.4 , Table No. 5 , ii)(Flexing index)	-	1200	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	1050	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , i)(Thickness)	-	300	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	2025	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	1050	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	2500	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	1650	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1650	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	3500	-
7.6 , Table No. 7 , iv)(Tear strength)	-	900	-
7.6 , Table No. 7 , v)(Tensile strength)	-	900	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	1500	-
7.7 , Table No. 8 , i)(Compression set)	-	1500	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	900	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	2500	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	900	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	1000	-
7.8 , Table No. 9 , ii)(Resilience)	-	1000	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	1000	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	0	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	1000	-
7.8 , Table No. 9 , v)(Peel strength)	-	1350	-
7.9 , Table No. 10 , i)(Peel strength)	-	1700	-
7.9 , Table No. 10 , ii)(Shear strength)	-	1700	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	1250	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	1000	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	1000	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	1500	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	1000	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	1250	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	0	-
8(MARKING AND PACKING)	-	200	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1800	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4500	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1900	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5500	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	450	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	5500	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
7.12.2 (Amendment 1)(Lead content)	-	1200	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1500	-
4(SAMPLING AND CONDITIONING)	-	-	-
5(DESIGN)	-	-	-
6(SIZE AND FITTINGS)	-	-	-
7.1.1(Whole Footwear)	-	-	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-	-
7.1.5(Energy Absorption at Seat Region)	-	-	-
7.1.6(Complete Shoe Flexing)	-	-	-
7.1.8(Slip Resistance)	-	-	-
7.1.9(Heel Drop)	-	-	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	-	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	-	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	-	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	-	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	-	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	-	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	-	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	-	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	-	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	-	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	-	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	-	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	-	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	-	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	-	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	-	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	-	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	-	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	-	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	-	-
7.3 , Table No. 4 , i)(Tear strength,)	-	-	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	-	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	-	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	-	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	-	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	-	-
7.4 , Table No. 5 , i)(Thickness)	-	-	-
7.4 , Table No. 5 , ii)(Flexing index)	-	-	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	-	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	-	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	-	-
7.5 , Table No. 6 , i)(Thickness)	-	-	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	-	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	-	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	-	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	-	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	-	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	-	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	-	-
7.6 , Table No. 7 , iv)(Tear strength)	-	-	-
7.6 , Table No. 7 , v)(Tensile strength)	-	-	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	-	-
7.6 , Table No. 7 , vii)(Compression set)	-	-	-
7.7 , Table No. 8 , i)(Compression set)	-	-	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	-	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	-	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	-	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	-	-
7.8 , Table No. 9 , ii)(Resilience)	-	-	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	-	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	-	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	-	-
7.8 , Table No. 9 , v)(Peel strength)	-	-	-
7.9 , Table No. 10 , i)(Peel strength)	-	-	-
7.9 , Table No. 10 , ii)(Shear strength)	-	-	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	-	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	-	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	-	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	-	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	-	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	-	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	-	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	-	-
8(MARKING AND PACKING)	-	-	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	-	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	-	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	-	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
7.12.2 (Amendment 1)(Lead content)	-	-	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	-	-

Complete

31 Dec, 2026

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 7.1.7 Washability

IS 6719 (1972)

Solid Pvc Soles And Heels

Footwear

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	400	-
3.6 (vi)(Lead (as Pb) ppm)	-	1200	-
3.6 (v)(Volatility, percent by means )	-	1200	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	900	-
3.6 (iii)(Elongation at break, percent )	-	0	-
3.6 (ii)(Tensile Strength )	-	900	-
3.6 (i)(Relative density )	-	400	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	200	-
6 ,6.1,6.2,6.3(Test Method)	-	0	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	200	-
Cl. 6.4(Measurement of thickness)	-	300	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	1650	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	1650	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	1200	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	1200	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	1200	-
3.6.1(Hardness )	-	-	-
3.6 (vi)(Lead (as Pb) ppm)	-	-	-
3.6 (v)(Volatility, percent by means )	-	-	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	-	-
3.6 (iii)(Elongation at break, percent )	-	-	-
3.6 (ii)(Tensile Strength )	-	-	-
3.6 (i)(Relative density )	-	-	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	-	-
6 ,6.1,6.2,6.3(Test Method)	-	-	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	-	-
Cl. 6.4(Measurement of thickness)	-	-	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	-	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	-	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	-	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	-	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	-	-

Complete

31 Dec, 2026

-
Included.w.e.f.27.01.2025

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

Footwear

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	1650	-
4.2(Water absorption)	-	1000	-
4.2(Heat Shrinkage )	-	2500	-
4.2(Split tear strength)	-	900	-
4.2(Shrinkage at room temp)	-	2500	-
4.2(Compression set)	-	1500	-
4.2(Hardness (Shore A))	-	400	-
4.2(Density )	-	400	-
4.2(Size & Thickness )	-	300	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	0	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	400	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ii)(Hardness, Shore A durometer min)	-	400	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	900	-
6, 6.1(Packing)	-	200	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vii)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ix)(Flexing resistance)	-	1650	-
5, 5.1(Marking)	-	300	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	0	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	400	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	400	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	1500	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4.1.3 And 8.3,Table1(vii) Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	1650	-
5, 5.1(Marking)	-	300	-
6, 6.1(Packing)	-	200	-
4.1.3(Thickness)	-	300	-
8.3(Abrasion resistance at applied force of 5 N)	-	1650	-
4.2(Flexing resistance )	-	1650	-
4.2(Water absorption)	-	1000	-
4.2(Heat Shrinkage )	-	2500	-
4.2(Split tear strength)	-	900	-
4.2(Shrinkage at room temp)	-	2500	-
4.2(Compression set)	-	1500	-
4.2(Hardness (Shore A))	-	400	-
4.2(Density )	-	400	-
4.2(Size & Thickness )	-	300	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	0	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	400	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ii)(Hardness, Shore A durometer min)	-	400	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	900	-
6, 6.1(Packing)	-	200	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vii)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ix)(Flexing resistance)	-	1650	-
5, 5.1(Marking)	-	300	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	0	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	400	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	400	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	1500	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4.1.3 And 8.3,Table1(vii) Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	1650	-
5, 5.1(Marking)	-	300	-
6, 6.1(Packing)	-	200	-
4.1.3(Thickness)	-	300	-
8.3(Abrasion resistance at applied force of 5 N)	-	1650	-
4.2(Flexing resistance )	-	-	-
4.2(Water absorption)	-	-	-
4.2(Heat Shrinkage )	-	-	-
4.2(Split tear strength)	-	-	-
4.2(Shrinkage at room temp)	-	-	-
4.2(Compression set)	-	-	-
4.2(Hardness (Shore A))	-	-	-
4.2(Density )	-	-	-
4.2(Size & Thickness )	-	-	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ii)(Hardness, Shore A durometer min)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	-	-
6, 6.1(Packing)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vii)(Heat shrinkage test at 100±1°C for 1 hour max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, ix)(Flexing resistance)	-	-	-
5, 5.1(Marking)	-	-	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	-	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	-	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	-	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	-	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(vii) Heat shrinkage test at 100±1°C for 1 hour max)	-	-	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	-	-
5, 5.1(Marking)	-	-	-
6, 6.1(Packing)	-	-	-
4.1.3(Thickness)	-	-	-
8.3(Abrasion resistance at applied force of 5 N)	-	-	-

Complete

31 Dec, 2026

-
Included w.e.f 06.02.2025

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

Footwear

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	-
5/5.1(REQUIREMENTS-General)	-	200	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	-
5/5.1(REQUIREMENTS-General)	-	200	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	-
5/5.1(REQUIREMENTS-General)	-	200	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
6(Marking and packing)	-	300	-
8.1(Test methods)	-	0	-
8.3(Measurement of thickness)	-	300	-
5.5 (Amendment 1)(Thickness)	-	300	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	400	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	400	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	1650	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	900	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	0	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	900	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1650	-
Cl.6.1,6.2,6.3(Marking and packing)	-	300	-
8.1(Test Methods)	-	0	-
Cl.8.3(Measurement of thickness ")	-	300	-

Complete

31 Dec, 2026

-
Included.w.e.f.27.01.2025

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

Footwear

61125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	200	-
Cl No.4.3(Whole Footwear)	-	0	-
4.3.1(Insole)	-	200	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1650	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1650	-
4.3.6(Energy Absorption at Seat Region)	-	1050	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	900	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	550	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	900	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	900	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	3500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	900	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	2025	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	550	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	1500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	1050	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	2025	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	1050	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1650	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1650	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	3500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	900	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	2500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1700	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1700	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1500	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	550	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1250	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	45000	-
Cl No . 5(MARKING AND PACKING)	-	300	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1800	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1900	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	450	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
Clause 4.2 - 4.2.1(Construction)	-	200	-
Clause 4.2 - 4.2.2(Construction)	-	200	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1650	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1650	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	900	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	1500	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	900	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	1000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	1500	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	900	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	2025	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	1500	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	300	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	900	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	1050	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	300	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	2025	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	1050	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1650	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1650	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	3500	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	900	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	2500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	200	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1650	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1050	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1650	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	45000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1200	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	900	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	550	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	900	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	900	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	900	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	2025	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	550	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	300	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	900	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1050	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	300	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	2025	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	1050	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1650	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	3500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	900	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	2500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1500	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	550	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	550	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	1250	-
Clause 4.4, Table 2 iii)(Tear strength)	-	900	-
Cl No.4.1(Sampling and Conditioning)	-	-	-
Cl No.4.2(Construction)	-	-	-
Cl No.4.3(Whole Footwear)	-	-	-
4.3.1(Insole)	-	-	-
4.3.2(Toe spring height)	-	-	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-	-
4.3.6(Energy Absorption at Seat Region)	-	-	-
4.3.7(Complete Shoe Flexing)	-	-	-
4.3.9(Slip Resistance)	-	-	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	-	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	-	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	-	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	-	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	-	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	-	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	-	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	-	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	-	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	-	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	-	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	-	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	-	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	-	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	-	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	-	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	-	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	-	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	-	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	-	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	-	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	-	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	-	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	-	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	-	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	-	-
Cl No . 5(MARKING AND PACKING)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Clause 4.2 - 4.2.1(Construction)	-	-	-
Clause 4.2 - 4.2.2(Construction)	-	-	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	-	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	-	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	-	-
Clause 4.4, Table 1 ii)(Tear strength)	-	-	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	-	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	-	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	-	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.5, Table 3 i)(Tear strength)	-	-	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	-	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.6, Table 4 i)(Thickness)	-	-	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	-	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	-	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	-	-
Clause 4.7, Table 5 i)(Thickness)	-	-	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	-	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	-	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	-	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	-	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	-	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	-	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	-	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	-	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	-	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	-	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	-	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	-	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	-	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	-	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	-	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	-	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	-	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	-	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	-	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	-	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	-	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	-	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	-	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	-	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	-	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	-	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	-	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	-	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	-	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	-	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	-	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	-	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	-	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	-	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	-	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	-	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	-	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	-	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	-	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	-	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	-	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	-	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	-	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	-	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	-	-
Clause 4.4, Table 2 iii)(Tear strength)	-	-	-

Complete

31 Dec, 2026

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 4.3.8 Washability

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

3214 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-

Complete

31 Dec, 2026

-
Included w.e.f. 29-09-2020

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	15000	-
5.2(Message Readability)	-	15000	-
5.1(Inputting of text)	-	15000	-
5.2(Message Readability)	-	15000	-
6(Marking)	-	1000	-
6(Marking)	-	0	-

Complete

31 Dec, 2026

-
Included w.e.f. 26.12.2022

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis

Complete

31 Dec, 2026

-
REVISED VERWION OF IS 9873 PT-3):2020 INCLUDED W.E.F. 20-07-2021.

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

3597 View breakup
Rs. 3597/- [45% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.9 - c( Metal wires and rods)	-	500	N/A
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	N/A
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	N/A
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	N/A
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	N/A
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	N/A
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	500	N/A
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	N/A
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	N/A
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	N/A
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	500	N/A
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	500	N/A
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	500	N/A
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	500	N/A
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	500	N/A
4.11.6(Cords- Electrical cables)	-	500	N/A
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	500	N/A
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	N/A
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	500	N/A
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	N/A
4.11.10(Cords-Cords on toy bags)	-	500	N/A
4.11.11( Cords, strings and lines for flying toys- )	-	500	N/A
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	N/A
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	NA
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	N/A
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	N/A
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	N/A
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	N/A
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	N/A
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	N/A
4.14(a)(Springs)	-	500	N/A
4.14(b)(Springs)	-	500	N/A
4.14(c)(Springs)	-	500	N/A
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	N/A
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	N/A
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	N/A
4.16.1(Enclosures-Ventilation)	-	500	N/A
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	N/A
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	N/A
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	N/A
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	N/A
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	N/A
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	N/A
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	N/A
4.18.2(b)(Projectile toys-Projectiles)	-	500	N/A
4.18.2(c)(Projectile toys-Projectiles)	-	500	N/A
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	N/A
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	N/A
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	N/A
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	N/A
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	N/A
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	N/A
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	500	N/A
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	N/A
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	N/A
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	N/A
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	N/A
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	N/A
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	N/A
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	N/A
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	N/A
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	N/A
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	N/A
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	N/A
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	N/A
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	N/A
4.19(Rotors and propellers)	-	500	N/A
4.2(Aquatic toys)	-	500	N/A
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	N/A
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	500	N/A
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	N/A
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	N/A
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	N/A
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	N/A
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	N/A
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	N/A
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	N/A
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	N/A
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	N/A
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	500	N/A
4.6.2(Edges-Functional sharp edges)	-	500	N/A
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	N/A
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	N/A
4.7.2 - a(Points-Functional sharp points)	-	500	N/A
4.7.2 - b(Points-Functional sharp points)	-	500	N/A
4.8.1(Projections-General requirments)	-	500	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	N/A
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	N/A
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	N/A
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	N/A
4.6.4( Edges-Edges on moulded toys)	-	500	N/A
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	N/A
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	N/A
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	N/A
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.7.3 (Wooden toys)	-	500	N/A
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	N/A
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	N/A
4.1(Normal use)	-	500	N/A
4.3.1(Material quality)	-	500	N/A
5.24.6.1(Tension Test General procedure)	-	500	N/A
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	1056	N/A
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	1056	N/A
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1056	N/A
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1056	N/A
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	N/A
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1056	N/A
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	N/A
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	N/A
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	N/A
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	N/A
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	N/A
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	500	NA
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	500	NA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	NA
4.16.1(Enclosures-Ventilation-No of openings)	-	500	NA
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	NA
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	NA
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	NA
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	NA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	500	NA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	500	NA

Complete

31 Dec, 2026

-
Excluding: Balloons (Cl.4.5.6), Marbles (Cl.4.5.7), Cord, Strings & Lines for flying toys / Electric Resistance of cords (Cl.4.11.7 / 5.11.3), Braking (Cl.4.21), Toy bicycles (Cl.4.22), Speed limitation of electrically driven ride on toy (Cl.4.23), Toy roller skates, Toy inline skates & Toy skate boards (Cl.4.27), Pull and push toys and hand activated spring propelled toys (Cl.5.25.2.3.7), Toy scooters (Cl.4.30)

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1056 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1056	GST not included
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1056	GST not included
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1056	GST not included
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1056	GST not included
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	GST not included
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1056	GST not included
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	GST not included
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1056	GST not included
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1056	GST not included
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	GST not included
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	GST not included
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1056	GST not included
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1056	GST not included
4.1(General)	-	1056	GST not included

Complete

31 Dec, 2026

-
-

IS 15644 (2006)

Safety of electric toys

38250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	250	N/A
8.0(Power Input)	-	1000	N/A
9.0(Heating and abnormal operation)	-	2500	N/A
10.0(Electrical strength at operating temperature)	-	2500	N/A
11.1(Moisture resistance)	-	5000	N/A
11.2(Resistant to humidity)	-	5000	N/A
12.0(Electric strength at room temperature)	-	2500	N/A
13.0(Mechanical strength)	-	1000	N/A
14.1(Construction)	-	250	N/A
14.2(Construction)	-	250	N/A
14.3(Construction)	-	250	N/A
14.4(Construction)	-	250	N/A
14.5(Construction)	-	250	N/A
14.6(Construction)	-	250	N/A
14.7(Construction)	-	250	N/A
14.8(Construction)	-	250	N/A
14.9(Construction)	-	250	N/A
14.1(Construction)	-	250	N/A
14.11(Construction)	-	250	N/A
14.12(Construction)	-	250	N/A
14.13(Construction)	-	250	N/A
14.14(Construction)	-	250	N/A
15.1(Protection of cords and wires)	-	500	N/A
15.2(Protection of cords and wires)	-	500	N/A
16.0(Components)	-	250	N/A
17 Table-1(Screws and connections)	-	250	N/A
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	N/A
18.0(Clearance and creepage distance)	-	500	N/A
19.1(Ball pressure test IEC 60695-10-2)	-	2500	N/A
19.2.1(Glow wire test IEC 60695-2-11)	-	5000	N/A
19.2.2(Needle flame test)	-	5000	N/A
20.0(Radiation, toxicity and similar hazards)	-	250	N/A

Complete

31 Dec, 2026

-
Included w.e.f. 29-09-2020. Exclusion: radiation, toxicity & similr hazards (cl.20), toys incorporating lasers and light-emitting diodes (annex E)

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

80000 View breakup
Rs.80,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	N/A
5(Classification of Luminaires')	-	2500	N/A
6.0(Marking)	-	2500	N/A
7.0(Construction)	-	40000	N/A
8.0(Creepage Distance and Clearances)	-	2500	N/A
9.0(Provision for earthing)	-	3500	N/A
10.0(Terminals)	-	15000	N/A
11.0(External & Internal Wiring)	-	11000	N/A
12.0(Protection against electric shock)	-	5000	N/A
13.0(Endurance Tests and Thermal Tests)	-	18000	N/A
14.0(Resistance to Dust & Moisture)	-	17000	N/A
15.0(Insulation Resistance and Electric Strength)	-	23000	N/A
16.0(Resistance to Heat , fire and tracking)	-	23000	N/A

Complete

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Scope restricted for rating up to 600 V only. Excluding: UV Radiation (Cl.4.24), Photometric test (Cl.17) and Resistance to dust, solid objects & moisture for pressure water tight luminaires (IPX8) (Cl.9.2.9 of RD.

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

80000 View breakup
Rs.80,000/-[15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	15% discount to BIS
8(Protection against accidental contact with live parts)	-	20000	15% discount to BIS
9(Terminals)	-	121000	15% discount to BIS
10(PROVISION FOR EARTHING)	-	3000	15% discount to BIS
11(MOISTURE RESISTANCE)	-	10000	15% discount to BIS
12(Electric Strength)	-	1000	15% discount to BIS
14(Fault conditions)	-	5000	15% discount to BIS
15(Transformer heating)	-	15000	15% discount to BIS
17(Creepage distance and clearances)	-	5000	15% discount to BIS
18(Screws, current carrying parts and connections)	-	5000	15% discount to BIS
19(Resistance to heat, fire and tracking)	-	50000	15% discount to BIS
20(Resistance to corrosion)	-	5000	15% discount to BIS
16(Construction)	-	10000	15% discount to BIS

Complete

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Excluding: Testing of Components (Enclosure, Bridging resistor in primary circuit, Capacitor & RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains transformer, PCB material, Metal base PCB for LED, Transparent cover, Bobbin, Insulated tape, Heat shrinkage sleeves, Connector, Fuse, Internal wire, LED, Optocoupler, EMI/EMC filter,

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

63500 View breakup
Rs.63,500/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2500	15 % discount to BIS
6(Interchangeability)	-	5000	15 % discount to BIS
7(Protection against accidental contact with live parts)	-	4000	15 % discount to BIS
8(Insulation Resistance and Electric Strength)	-	19500	15 % discount to BIS
9(MECHANICAL STRENGTH)	-	10000	15 % discount to BIS
10(cap temperature)	-	10000	15 % discount to BIS
11(Resistance to Heat)	-	6500	15 % discount to BIS
12(Resistance to Flame and Ignition)	-	5500	15 % discount to BIS
13(Fault conditions)	-	12000	15 % discount to BIS
14(Creepage distance and clearances)	-	2500	15 % discount to BIS

Complete

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Restricted to cap type B22d, E27 & E14 only.

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

180000 View breakup
Rs. 180000/- For Microwave Oven [15% discount to BIS].

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2500	N/A
7(Marking and instructions)	-	2500	N/A
8(Protection against live parts)	-	2500	N/A
10(POWER INPUT AND CURRENT)	-	3500	N/A
11(HEATING)	-	8500	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	7000	N/A
14(IMPULSE VOLTAGE TEST)	-	5500	N/A
15(HUMIDITY TREATMENT TEST)	-	35000	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	7000	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	8500	N/A
18(ENDURANCE)	-	60000	N/A
19(ABNORMAL OPERATION)	-	14000	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	N/A
21(MECHANICAL STRENGTH)	-	33500	N/A
22(CONSTRUCTION)	-	8500	N/A
23(INTERNAL WIRING)	-	2500	N/A
24(COMPONENTS)	-	2500	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	8500	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	N/A
27(PROVISION FOR EARTHING)	-	3500	N/A
28(SCREWS AND CONNECTIONS)	-	2500	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3500	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	17500	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	5500	N/A

Complete

31 Dec, 2026

-
With Exclusions for: Electro static discharge (Cl.19.11.4.1), Radiation Field (Cl.19.11.4.2), Fast Transient burst (Cl.19.11.4.3), Voltage dips and interruption (19.11.4.4), Automatic cord reel (Cl.22.16), Oxygen bomb (Cl.22.32) , Software (Cl.22.46), Components excluding Cl.24.1.1 for interlock (Cl.24)

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

80000 View breakup
Rs.80000/- For UPS/ Inverters below 5 KVA [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	5000	N/A
4.6(Power interface)	-	5000	N/A
4.7(Marking & instructions)	-	2500	N/A
5.1(Protection against shock and energy hazards)	-	8500	N/A
5.2(Requirement of auxiliary circuits)	-	2000	N/A
5.3(Protective earthing and bonding)	-	8500	N/A
5.4(AC and DC power isolation)	-	2000	N/A
5.5(Over current and earth fault condition)	-	5000	N/A
5.6(Safety interlocks)	-	2000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	N/A
6.1(Wiring, connections and supply)	-	2500	N/A
6.2(Connection to power)	-	2500	N/A
6.3(Wiring terminals for external power conductors)	-	2500	N/A
7.1(Enclosure)	-	5000	N/A
7.2(STABILITY)	-	5000	N/A
7.3(MECHANICAL STRENGTH)	-	5000	N/A
7.4(Construction details)	-	2000	N/A
7.5(Resistance to fire)	-	10000	N/A
7.6(Battery location)	-	2000	N/A
8.1(General procision for earth leakage)	-	5000	N/A
8.2(Electric Strength)	-	5000	N/A
8.3(Abnormal operating and fault conditions)	-	8500	N/A
9.0(Connection to telecommunication networks)	-	8500	N/A

Complete

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Excluding following tests: Components (Cl. 4.5 / RD Cl.1.5); Interlocks Switches (Cl. 5.6.1 & Cl. 5.6.2)/ (RD 2.8.2 & 2.8.5) Switches & Relays (Cl.2.8.7); Semiconductor device (Cl.2.10.5.4), PCB Material (Cl.2.10.6), Internal wire (Cl.3.1.4), Appliance inlet/ connectors (Cl.3.2.4), Non-rewirable plug with PVC sheathed cable (Cl.3.2.5), Batteries (Cl.4.3.8).

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

90000 View breakup
Rs.90,000/- For Electronics Games (Video), Optical disc player with built in amplifiers of input power 200W and above, Amplifiers with input power 2000W and abovee. Electronic musical system with input power 200W and above, Power adopters for audio, video & similar electronic apparatus. Plasma/LCD/LED TVs of screen size 32" & above up to 100" Additional Products: Rs.1,10,000/- for Plasma/LCD/LED TVs of screen size up to 32". [15 % Discount to BIS]. ADDITIONAL PRODUCTS INCLUDED IN THE SCOPE W.E.F. 10-09-2020: Rs.80000/- for Wireless headphone & earphone, Rs.90000/- for Electronic Musical system with input power below 200W, Rs.110000/- Television other than plasma/LCD/LED/TVs . [15% Discount to BIS].

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	500	N/A
6(Hazardous radiations)	-	250	N/A
7(Heating under normal operating conditions)	-	5000	N/A
8(Constructional requirements with regard to the protection against electric shock)	-	5000	N/A
9(Electric shock hazard under normal operating conditions)	-	5000	N/A
10(Insulation requirements)	-	15000	N/A
11(Fault conditions)	-	15000	N/A
12(Mechanical strength)	-	5000	N/A
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	N/A
14(Components)	-	2000	N/A
15(TERMINALS)	-	2500	N/A
16(External flexible cords)	-	2500	N/A
17(Electrical connections and mechanical fixings)	-	5000	N/A
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	5000	N/A
19(Stability and mechanical hazards)	-	5000	N/A
20(Resistance to fire)	-	15000	N/A

Complete

31 Dec, 2026

-
REVISED VERSION of IS 616:2017 included, Test facility for Measurement of Transient Voltages (Cl.13.3.4) & Additional Products included w.e.f. 10.04.2019. Exclusion of following testIonizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), LED Radiation (Cl.6.3), Requirements for insulated winding wires for use without additional interleaved insulation (Cl.8.16), Endurance test for wound components with insulated winding wires without additional interleaved insulation (8.17), Printed Boards (Cl.13.5), Component test (Cl.14), Flexing test (Cl.16.3), Mechanical strength of picture tubes and protection against the effects of Implosion (Cl.18) Electrical Component (Cl.20.2.2), Internal Wiring (Cl.20.2.3), Printed Boards (Cl.20.2.4), Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4 (Cl.20.2.5

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

93975 View breakup
Rs.93,975/- For Laptop/Notebook/.Tablet, Visual display units, Video monitors of screen size 32" and above up to 100", Printer, Plotters, Scanner, Telephone answering machine, Set top box, Automatic data processing machine, Power adaptors for IT equipments, Mobile phones, Cash registers, Point of sale terminal, Copying machine/duplicators, Smart card readers, Mail processing machines/postage machines/Franking machines, Passport reader, Power banks for use in portable applications and Rs.60000/- for wireless key board. Additional Products: Rs.1,11,500/- Visual Display Units, Video monitors of screen size up to 32”, CCTV Cameras / CCTV Recorders, USB driven Barcode reader, Barcode Scanners, Iris Scanners, Optical fingerprint Scanners & Smart Watches. [15% discount to BIS]. ADDITIONAL PRODUCTS INCLUDED IN THE SCOPE W.E.F. 10-09-2020: : Rs.50000/- for Keyboard, Rs.125000/- Automatic teller cash dispensing machines, Rs.70000/-USB type external hard disk drive, Rs.70000/-USB type External solid state storage devices (above 256 GB capacity), Rs.93975/-Standalone switch mode poer supplied (SMPS) with output voltage 48 V (max). [15% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2500	N/A
1.6(Power interface .)	-	2500	N/A
1.7(Markings and instructions)	-	2500	N/A
2.1(Protection from electric shock and energy hazards)	-	7500	N/A
2.2(SELV circuits)	-	2500	N/A
2.3(TNV circuits)	-	2500	N/A
2.4(Limited current circuits)	-	2500	N/A
2.5(Limited power sources .)	-	3500	N/A
2.6(Provisions for earthing and bonding)	-	3500	N/A
2.7(Overcurrent and earth fault protection in primary circuits)	-	2500	N/A
2.8(Safety interlocks)	-	2500	N/A
2.9(Electrical insulation)	-	16000	N/A
2.10(Clearances, creepage distances and distances through insulation)	-	13000	N/A
3.1(General)	-	2500	N/A
3.2(Connection to a mains supply)	-	2500	N/A
3.3(Wiring terminals for connection of external conductors)	-	2500	N/A
3.4(Disconnection from the mains supply)	-	2500	N/A
3.5(Interconnection of equipment)	-	2500	N/A
4.1(Stability)	-	2500	N/A
4.2(Mechanical strength)	-	19000	N/A
4.3(Design and construction)	-	2500	N/A
4.4(Protection against hazardous moving parts)	-	2500	N/A
4.5(Thermal requirements)	-	17500	N/A
4.6(Openings in enclosures)	-	2500	N/A
4.7(Resistance to fire)	-	33000	N/A
5.1(Touch current and protective conductor curren)	-	3500	N/A
5.2(Electric strength)	-	3500	N/A
5.3(Abnormal operating and fault conditions)	-	8500	N/A
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3500	N/A
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	7000	N/A
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	N/A
7.1(General)	-	2500	N/A
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2500	N/A
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2500	N/A
7.4(Insulation between primary circuits and cable distribution systems)	-	12700	N/A

Complete

31 Dec, 2026

-
Test facility for Measurement of Transient Voltages (Cl.2.10.3.9) & Impulse test (Cl.2.10.3.5 & Cl.6.2.2.1) and Additional Products included w.e.f. 10.04.2019 Exclusion of following testComponent test (Cl.1.5), Moving Parts (Cl.2.8.5), Switches, Relays and their related circuits (Cl.2.8.7), Semi-Conductor Devices (Cl.2.10.5.4), AC power supply cords (Cl.3.2.5.1), Cathode ray tubes (Cl.4.2.8), High Pressure Lamp (Cl.4.2.9), Batteries (Cl.4.3.8), Protection in operator

Bureau of Indian Standards

The National Standards Body of India

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED

C-19, Sector -7, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9818494127 monika.ahuja@bureauveritas.com

Scope List