BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

61 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

CIPET, KOCHI

6137634

IS 303 (2024)

Plywood for General Purposes - Specification (fourth revision)

MR (moisture resistant) grade;BWR (boiling water resistant) grade, BWP (boiling water proof) grade

18777 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-13(Marking)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1600	Sample preparation charges included.25% discount for BIS on test charge
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1600	Sample preparation charges included.25% discount for BIS on test charge
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	-
Cl-8.3(Edge Straightness)	-	250	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1600	Sample preparation charges included.25% discount for BIS on test charge
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	250	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	0	-
Cl.8.1(Dimensions -width)	-	250	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl. 4(Grades)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	500	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1600	Sample preparation charges included.25% discount for BIS on test charge
Cl-11.4(Moisture Content)	-	900	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2600	Sample conditioning charges included.25% discount for BIS on test charge
Cl-8.3(Squareness)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	250	-
Cl-8.1(Dimensions -length)	-	250	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.1(Classification by appearance)	-	300	-
Cl-11.3.2(Mycological Test)	-	5000	-

31 Dec, 2026

-
Included w.e.f 03.08.2026 Exclusion Cl-11.7 (Steady-State Formaldehyde Emission Test)

BIS, Patna Branch Laboratory (PBL)

None

IS 303 (2024)

Plywood for General Purposes - Specification (fourth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-13 (Marking)	-
Cl-5.1 (Classification by appearance)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl.8.1 (Dimensions -width)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-8.3 (Edge Straightness)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl. 4 (Grades)	-
Cl-7.2.4 (Scarf Joints)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.4 (Moisture Content)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.1 (Dimensions -length)	-
Cl-7.2.5.3 (Overlap)	-
Cl-7.2.5.1 (Gaps in cores and cross-bands)	-
Cl-7.2.3 (Grain Direction)	-
Cl-6.2 (Adhesive)	-
Cl-6.1 (Timber)	-
Cl-5.2, Table-2 (Maximum Number of Categories of Permissible Defects, per m2)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-7.2.5.1 (Gaps in cores and cross-bands)	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.1 (Classification by appearance)	-

-
-

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2000	-
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	250	-
Cl-5.2, Table- 1 (ii)(Checks)	-	250	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	250	-
Cl-5.2, Table- 1 (iv)(Dote)	-	250	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	250	-
Cl-5.2, Table- 1 (vi)(Joints)	-	250	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	250	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	250	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	250	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	250	-
Cl-5.2, Table- 1 (xi)(Patches)	-	250	-
Cl-5.2, Table- 1 (xii)(Splits)	-	250	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	250	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	500	-

14 Jun, 2027

-
-

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 303 (1989)

Plywood for General Purposes -

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	3000	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-

14 Jun, 2027

-
-

NATIONAL TEST HOUSE-SR (NTH), Chennai

6122704

IS 303 (1989)

Plywood for General Purposes -

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2000	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	1000	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	1000	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	2000	-
5.1(Type - For BB Type)	-	500	-
5.1(Type - For AB Type)	-	500	-
5.1(Type - For AA Type)	-	500	-
4(Grade - For MR grade)	-	1000	-
4(Grade - For BWR grade)	-	1000	-
cl. 13.1(marking)	-	1000	-
cl. 13.2(marking)	-	1000	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	1000	-
CL-8.2(Thickness)	-	1000	-
CL-7.2.3(Grain Direction)	-	1000	-
CL-7.2.1(Thickness)	-	1000	-
CL-6.2(Adhesive)	-	1000	-
CL-7.2.5.1(Gaps in cores and cross-bands)	-	1000	-

28 Nov, 2028

-
-

National Test House (NWR) - NTH, Jaipur

8122904

IS 303 (1989)

Plywood for General Purposes -

BWR/MR

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grade - For BWR grade)	-	0	-
4(Grade - For MR grade)	-	0	-
5.1(Type - For AA Type)	-	1000	-
5.1(Type - For AB Type)	-	1000	-
5.1(Type - For BB Type)	-	1000	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	1000	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	0	-

31 Dec, 2026

-
-

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

all

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	6000	-
Cl-5.2, Table- 1 (i)(Blister)	-	6000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	6000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	6000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	6000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	6000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	6000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	6000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	6000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	6000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	6000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	6000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	6000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	6000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	6000	-
Cl-6.1(Timber)	-	6000	-
Cl-6.2(Adhesive)	-	6000	-
Cl-7.2.1(Thickness of veneers)	-	6000	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	6000	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	6000	-
Cl-8.2(Thickness of the plywood boards)	-	6000	-
Cl-8.3(Squareness)	-	6000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	6000	-
Cl-11.3.2(Mycological Test)	-	6000	-
Cl-11.4(Moisture Content)	-	6000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	6000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	6000	-
Cl-11.6(Formaldehyde Content Test)	-	6000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	6000	-
Cl-9(WORKMANSHIP AND FINISH)	-	6000	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	6000	-
Cl.8.1(Dimensions -width)	-	6000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	6000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	6000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	6000	-
Cl-8.3(Edge Straightness)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	6000	-
Cl-13(Marking)	-	0	-

-
-

Eco Paryavaran Laboratories and Consultants Pvt. Ltd.

9198906

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Grade: MR/BWR/BWP Formaldehyde Class- E1 & E2 (All grade, size, type as per IS)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	5500	-
Cl-6.2(Adhesive)	-	5500	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	100	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	100	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	3500	-
Cl-9(WORKMANSHIP AND FINISH)	-	500	-
Cl-7.2.4(Scarf Joints)	-	100	-
Cl. 4(Grades)	-	100	-
Cl.5.1(Type based on classification by appearance)	-	100	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	500	-
Cl.8.1(Dimensions -width)	-	200	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	200	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	200	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500	-
Cl-8.3(Edge Straightness)	-	200	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1500	-
Cl-13(Marking)	-	200	-

11 Aug, 2029

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test) (Optional Test)

Aaditech Test and Calibration Lab LLP

8179926

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	1500	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	300	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	300	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	750	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2000	-
Cl-9(WORKMANSHIP AND FINISH)	-	300	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	300	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	300	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-8.3(Edge Straightness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-13(Marking)	-	200	-
Cl-5.1(Classification by appearance)	-	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-	-
Cl-6.1(Timber)	-	-	-
Cl-6.2(Adhesive)	-	-	-
Cl-7.2.1(Thickness of veneers)	-	-	-
Cl-7.2.3(Grain Direction)	-	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-	-
Cl-7.2.5.2(Splits)	-	-	-
Cl-7.2.5.3(Overlap)	-	-	-
Cl-8.1(Dimensions -length)	-	-	-
Cl-8.2(Thickness of the plywood boards)	-	-	-
Cl-8.3(Squareness)	-	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-	-
Cl-11.3.2(Mycological Test)	-	-	-
Cl-11.4(Moisture Content)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.6(Formaldehyde Content Test)	-	-	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-	-
Cl-7.2.4(Scarf Joints)	-	-	-
Cl. 4(Grades)	-	-	-
Cl.5.1(Type based on classification by appearance)	-	-	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	-	-
Cl.8.1(Dimensions -width)	-	-	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	-	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	-	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	-	-
Cl-8.3(Edge Straightness)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	-	-
Cl-13(Marking)	-	-	-

-
Included w.e.f 17.02.2026 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

Standard Testing and Research Lab

9197206

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Grades

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	6000	-
Cl-5.2, Table- 1 (i)(Blister)	-	6000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	6000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	6000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	6000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	6000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	6000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	6000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	6000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	6000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	6000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	6000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	6000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	6000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	6000	-
Cl-6.1(Timber)	-	6000	-
Cl-6.2(Adhesive)	-	6000	-
Cl-7.2.1(Thickness of veneers)	-	6000	-
Cl-7.2.3(Grain Direction)	-	6000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	6000	-
Cl-7.2.5.2(Splits)	-	6000	-
Cl-7.2.5.3(Overlap)	-	6000	-
Cl-8.1(Dimensions -length)	-	6000	-
Cl-8.2(Thickness of the plywood boards)	-	6000	-
Cl-8.3(Squareness)	-	6000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	6000	-
Cl-11.3.2(Mycological Test)	-	6000	-
Cl-11.4(Moisture Content)	-	6000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	6000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	6000	-
Cl-11.6(Formaldehyde Content Test)	-	6000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	6000	-
Cl-9(WORKMANSHIP AND FINISH)	-	6000	-
Cl-7.2.4(Scarf Joints)	-	6000	-
Cl. 4(Grades)	-	6000	-
Cl.5.1(Type based on classification by appearance)	-	6000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	6000	-
Cl.8.1(Dimensions -width)	-	6000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	6000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	6000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	6000	-
Cl-8.3(Edge Straightness)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	6000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	6000	-
Cl-13(Marking)	-	6000	-

24 Feb, 2029

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

MORBI TEST HOUSE LLP

7195306

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Grade / Type / Size / Designation

10700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	-
Cl-5.2, Table- 1 (i)(Blister)	-	50	-
Cl-5.2, Table- 1 (ii)(Checks)	-	50	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	50	-
Cl-5.2, Table- 1 (iv)(Dote)	-	50	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	50	-
Cl-5.2, Table- 1 (vi)(Joints)	-	50	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	50	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	50	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	50	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	50	-
Cl-5.2, Table- 1 (xi)(Patches)	-	50	-
Cl-5.2, Table- 1 (xii)(Splits)	-	50	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	50	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	50	-
Cl-6.1(Timber)	-	50	-
Cl-6.2(Adhesive)	-	4000	-
Cl-7.2.1(Thickness of veneers)	-	50	-
Cl-7.2.3(Grain Direction)	-	50	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	50	-
Cl-7.2.5.2(Splits)	-	50	-
Cl-7.2.5.3(Overlap)	-	50	-
Cl-8.1(Dimensions -length)	-	500	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	2500	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-9(WORKMANSHIP AND FINISH)	-	50	-
Cl-7.2.4(Scarf Joints)	-	50	-
Cl. 4(Grades)	-	50	-
Cl.5.1(Type based on classification by appearance)	-	100	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	50	-
Cl.8.1(Dimensions -width)	-	500	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	500	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500	-
Cl-8.3(Edge Straightness)	-	500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1500	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1500	-
Cl-13(Marking)	-	50	-

-
Included w.e.f. 22.01.2026 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

Rajkot Metlab Services LLP, Rajkot

7183706

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Grade / Type / Size / Designation / Class

14900 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Classification by appearance)	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-
Cl-6.1(Timber)	-	-
Cl-6.2(Adhesive)	-	-
Cl-7.2.1(Thickness of veneers)	-	-
Cl-7.2.3(Grain Direction)	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-
Cl-7.2.5.2(Splits)	-	-
Cl-7.2.5.3(Overlap)	-	-
Cl-8.1(Dimensions -length)	-	-
Cl-8.2(Thickness of the plywood boards)	-	-
Cl-8.3(Squareness)	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-
Cl-11.3.2(Mycological Test)	-	-
Cl-11.4(Moisture Content)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-11.6(Formaldehyde Content Test)	-	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-
Cl-7.2.4(Scarf Joints)	-	-
Cl. 4(Grades)	-	-
Cl.5.1(Type based on classification by appearance)	-	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	-
Cl.8.1(Dimensions -width)	-	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	-
Cl-8.3(Edge Straightness)	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	-
Cl-13(Marking)	-	-

12 Jan, 2028

-
Included w.e.f 14.01.2026 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

AADISHAKTI TESTING &RESEARCH LABORATORIES LLP

9198806

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR,BWR,BWP& EMMISSION CLASS E1,E2

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	500	-
Cl-6.2(Adhesive)	-	1000	-
Cl-7.2.1(Thickness of veneers)	-	1000	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	300	-
Cl-7.2.5.2(Splits)	-	300	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	250	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	100	-
Cl. 4(Grades)	-	100	-
Cl.5.1(Type based on classification by appearance)	-	100	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	100	-
Cl.8.1(Dimensions -width)	-	250	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	250	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	250	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-8.3(Edge Straightness)	-	250	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-13(Marking)	-	100	-
Cl-7.2.5.3(Overlap)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-

07 Aug, 2029

-
Except Steady-State Formaldehyde Emission test as per Clause 11.7 of IS 303:2024 with Amendment 1

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP/AA/AB/AC/BB/BC/CC

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	100	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	100	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	300	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	600	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	100	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	100	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	300	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	0	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
Cl-8.3(Edge Straightness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	100	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	100	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	100	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	200	-
Cl-13(Marking)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	0	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	0	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
Cl-8.3(Edge Straightness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	0	-
Cl-13(Marking)	-	0	-

26 Aug, 2027

-
Included w.e.f 10.12.2025 Cl-11.7 (Steady-State Formaldehyde Emission Test)

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4 (Grades)	-
Cl-5.1 (Classification by appearance)	-
Cl.5.1 (Type based on classification by appearance)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-5.2, Table-2 (Maximum Number of Categories of Permissible Defects, per m2)	-
Cl-8.1 (Dimensions -length)	-
Cl.8.1 (Dimensions -width)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl-8.3 (Edge Straightness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-

-
Facility is complete except Clause No 6 (materials), Clause No 7 (Manufacturer), Clause No 11.6 (Formaldehyde Content test), Clause No 11.7 (Steady-state Formaldehyde Emission Test (Optional Test), Clause No 11.8 (Other tests)

National Test House (NR) - NTH, Ghaziabad

8101304

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Types/Grades

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-8.1(Dimensions -length)	-	300	-
Cl.8.1(Dimensions -width)	-	300	-
Cl-8.2(Thickness of the plywood boards)	-	400	-
Cl-8.3(Squareness)	-	250	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	250	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	250	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	3000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-5.1(Classification by appearance)	-	250	-

-
Included w.e.f 28.11.2025 Cl-11.7 (Steady-State Formaldehyde Emission Test)

CIMEC Infralabs Private Limited

8195606

IS 303 (1989)

Plywood for General Purposes -

MR, BWR, BWP

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	Nil
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	Nil
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	Nil
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1500	Nil
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1500	Nil
11.3(Moisture Content - Part 1 of IS 1734)	-	750	Nil
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	Nil
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	Nil
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	Nil
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	Nil
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	Nil
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	Nil
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	Nil
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	Nil
5.1(Type - For BB Type)	-	500	Nil
5.1(Type - For AB Type)	-	500	Nil
5.1(Type - For AA Type)	-	500	Nil
4(Grade - For MR grade)	-	500	Nil
4(Grade - For BWR grade)	-	500	Nil
cl. 13.1(marking)	-	500	Nil
cl. 13.2(marking)	-	500	Nil
CL-8.2(Thickness)	-	500	Nil
CL-7.2.3(Grain Direction)	-	500	Nil
CL-7.2.1(Thickness)	-	500	Nil
CL-7.2.5.1(Gaps in cores and cross-bands)	-	500	Nil

14 Jan, 2029

-
Exclusion: Cl-12 (Amendment No-2 OF IS 303) (OPTIONAL REQUIREMENT FOR ECO MARK)

Unique Test House LLP

9134536

IS 303 (1989)

Plywood for General Purposes -

Grade-MR/BWR, Type-AA/AB/BB,

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	250	---
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	---
11.3(Moisture Content - Part 1 of IS 1734)	-	600	---
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	250	---
8(Dimensions & Tolerances - Squareness - Annexure C)	-	200	---
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	250	---
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	250	---
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	250	---
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	250	---
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	250	---
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	250	---
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	---
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1500	---
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	200	---
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	---
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	---
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	---
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	---
5.1(Type - For BB Type)	-	100	-
5.1(Type - For AB Type)	-	100	-
5.1(Type - For AA Type)	-	100	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
4(Grade - For MR grade)	-	100	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
4(Grade - For BWR grade)	-	100	-

07 Sep, 2028

-
-

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	14999.99	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	15000	-
Cl-7.2.3(Grain Direction)	-	15000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	-
Cl-7.2.5.2(Splits)	-	15000	-
Cl-7.2.5.3(Overlap)	-	15000	-
Cl-8.1(Dimensions -length)	-	15000	-
Cl-8.2(Thickness of the plywood boards)	-	15000	-
Cl-8.3(Squareness)	-	15000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	-
Cl-11.3.2(Mycological Test)	-	15000	-
Cl-11.4(Moisture Content)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.6(Formaldehyde Content Test)	-	15000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9(WORKMANSHIP AND FINISH)	-	15000	-
Cl-7.2.4(Scarf Joints)	-	15000	-
Cl. 4(Grades)	-	15000	-
Cl.5.1(Type based on classification by appearance)	-	15000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-13(Marking)	-	15000	-
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	15000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	14999.96	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	14999.97	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	15000	-
Cl-7.2.3(Grain Direction)	-	15000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	-
Cl-7.2.5.2(Splits)	-	15000	-
Cl-7.2.5.3(Overlap)	-	15000	-
Cl-8.1(Dimensions -length)	-	15000	-
Cl-8.2(Thickness of the plywood boards)	-	15000	-
Cl-8.3(Squareness)	-	15000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	-
Cl-11.3.2(Mycological Test)	-	15000	-
Cl-11.4(Moisture Content)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.6(Formaldehyde Content Test)	-	15000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9(WORKMANSHIP AND FINISH)	-	15000	-
Cl-7.2.4(Scarf Joints)	-	15000	-
Cl. 4(Grades)	-	15000	-
Cl.5.1(Type based on classification by appearance)	-	15000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-13(Marking)	-	15000	-
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	14999.98	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	14999.98	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	14999.99	-
Cl-5.2, Table- 1 (xi)(Patches)	-	14999.98	-
Cl-5.2, Table- 1 (xii)(Splits)	-	14999.99	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	14999.99	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	14999.98	-
Cl-7.2.3(Grain Direction)	-	14999.99	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	14999.97	-
Cl-7.2.5.2(Splits)	-	14999.98	-
Cl-7.2.5.3(Overlap)	-	14999.98	-
Cl-8.1(Dimensions -length)	-	14999.98	-
Cl-8.2(Thickness of the plywood boards)	-	14999.98	-
Cl-8.3(Squareness)	-	14999.97	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	14999.97	-
Cl-11.3.2(Mycological Test)	-	14999.98	-
Cl-11.4(Moisture Content)	-	14999.97	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	14999.98	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	14999.97	-
Cl-11.6(Formaldehyde Content Test)	-	14999.98	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	14999.97	-
Cl-9(WORKMANSHIP AND FINISH)	-	14999.98	-
Cl-7.2.4(Scarf Joints)	-	14999.98	-
Cl. 4(Grades)	-	14999.98	-
Cl.5.1(Type based on classification by appearance)	-	14999.98	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	14999.96	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	14999.97	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	14999.97	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	14999.98	-
Cl-13(Marking)	-	15000	-

-
Included w.e.f. 02.09.2025

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR,BWR,BWP and Emission class E1 and E2 WITH AMND No1

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	1000	-
Cl-5.2, Table- 1 (i)(Blister)	-	500	-
Cl-5.2, Table- 1 (ii)(Checks)	-	500	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	500	-
Cl-5.2, Table- 1 (iv)(Dote)	-	500	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	500	-
Cl-5.2, Table- 1 (vi)(Joints)	-	500	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	500	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	500	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	500	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	500	-
Cl-5.2, Table- 1 (xi)(Patches)	-	500	-
Cl-5.2, Table- 1 (xii)(Splits)	-	500	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	500	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	-
Cl-6.1(Timber)	-	500	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	500	-
Cl-7.2.5.2(Splits)	-	500	-
Cl-7.2.5.3(Overlap)	-	500	-
Cl-8.1(Dimensions -length)	-	1500	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2500	-
Cl-11.6(Formaldehyde Content Test)	-	4500	-
Cl-9(WORKMANSHIP AND FINISH)	-	-	-
Cl-7.2.4(Scarf Joints)	-	-	-
Cl. 4(Grades)	-	-	-
Cl.5.1(Type based on classification by appearance)	-	-	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	-	-
Cl.8.1(Dimensions -width)	-	-	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	-	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	-	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	-	-
Cl-8.3(Edge Straightness)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	-	-
Cl-13(Marking)	-	-	-

30 Mar, 2027

-
-

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	50	-
Cl-5.2, Table- 1 (ii)(Checks)	-	50	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	50	-
Cl-5.2, Table- 1 (iv)(Dote)	-	50	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	50	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	50	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	50	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	50	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	50	-
Cl-5.2, Table- 1 (xi)(Patches)	-	50	-
Cl-5.2, Table- 1 (xii)(Splits)	-	50	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	50	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	50	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	100	-
Cl-7.2.3(Grain Direction)	-	100	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	100	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	100	-
Cl-8.2(Thickness of the plywood boards)	-	100	-
Cl-8.3(Squareness)	-	300	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	900	-
Cl-11.3.2(Mycological Test)	-	3000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-9(WORKMANSHIP AND FINISH)	-	100	-
Cl-7.2.4(Scarf Joints)	-	100	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	100	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	300	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-8.3(Edge Straightness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-13(Marking)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	50	-
Cl-5.2, Table- 1 (ii)(Checks)	-	50	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	50	-
Cl-5.2, Table- 1 (iv)(Dote)	-	50	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	50	-
Cl-5.2, Table- 1 (vi)(Joints)	-	50	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	50	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	50	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	50	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	50	-
Cl-5.2, Table- 1 (xi)(Patches)	-	50	-
Cl-5.2, Table- 1 (xii)(Splits)	-	50	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	50	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	50	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	50	-
Cl-7.2.5.2(Splits)	-	50	-
Cl-7.2.5.3(Overlap)	-	50	-
Cl-8.1(Dimensions -length)	-	50	-
Cl-8.2(Thickness of the plywood boards)	-	50	-
Cl-8.3(Squareness)	-	300	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	3000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-9(WORKMANSHIP AND FINISH)	-	100	-
Cl-7.2.4(Scarf Joints)	-	50	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	100	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	300	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-8.3(Edge Straightness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-13(Marking)	-	0	-

18 Dec, 2027

-
Included w.e.f. 29.08.2025 Exclusion: 2 Cl-11.7 (Steady-State Formaldehyde Emission Test)

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR(Moisture Resistance), BWR(Boiling Water Resistance, BWP( Boiling water proof), AA,AB, BB,CC

16250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (i)(Blister)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (ii)(Checks)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (iv)(Dote)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (vi)(Joints)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (xi)(Patches)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (xii)(Splits)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-6.1(Timber)	-	1000	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-6.2(Adhesive)	-	0	SEPARATE TESTING CHARGES AS PER BIS SCOPE OF TESTING
Cl-7.2.1(Thickness of veneers)	-	300	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-7.2.3(Grain Direction)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-7.2.5.2(Splits)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-7.2.5.3(Overlap)	-	100	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-8.1(Dimensions -length)	-	150	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-8.2(Thickness of the plywood boards)	-	300	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-8.3(Squareness)	-	150	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	3000	For MR (MOISTURE RESISTANT) Rs. 500.00 For BWR (BOILING WATER RESISTANT) Rs. 1500.00 For BWP (BOILING WATER PROOF) Rs. 3000.00
Cl-11.3.2(Mycological Test)	-	2500	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.4(Moisture Content)	-	600	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.6(Formaldehyde Content Test)	-	2500	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-9(WORKMANSHIP AND FINISH)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-13(Marking)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	500	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	500	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-7.2.4(Scarf Joints)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl. 4(Grades)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl.5.1(Type based on classification by appearance)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl.8.1(Dimensions -width)	-	150	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl.8, 8.3 & Annex C(Edge Straightness)	-	150	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl.8, 8.3 & Annex C(Edge Squareness)	-	150	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-8.3(Edge Straightness)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	0	5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY

20 Jan, 2028

-
Included w.e.f 31.12.2025 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR,BWR,BWP/AA,AB,BB, E1,E2,/Bending Class F10 to F50/All Size

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	150	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	150	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	150	-
Cl-7.2.3(Grain Direction)	-	150	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	150	-
Cl-7.2.5.2(Splits)	-	150	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	500	-
Cl-11.3.2(Mycological Test)	-	800	-
Cl-11.4(Moisture Content)	-	400	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	600	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	600	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	100	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

23 May, 2028

-
Included w.e.f 24.06.2025

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP/AA/AB/CC/E1/E2

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	200	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	1000	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl-5.1(Classification by appearance)	-	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-	-
Cl-6.1(Timber)	-	-	-
Cl-6.2(Adhesive)	-	-	-
Cl-7.2.1(Thickness of veneers)	-	-	-
Cl-7.2.3(Grain Direction)	-	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-	-
Cl-7.2.5.2(Splits)	-	-	-
Cl-7.2.5.3(Overlap)	-	-	-
Cl-8.1(Dimensions -length)	-	-	-
Cl-8.2(Thickness of the plywood boards)	-	-	-
Cl-8.3(Squareness)	-	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-	-
Cl-11.3.2(Mycological Test)	-	-	-
Cl-11.4(Moisture Content)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.6(Formaldehyde Content Test)	-	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-	-
Cl-7.2.4(Scarf Joints)	-	-	-

27 May, 2028

-
Included w.e.f.19.05.2025 Exclusion Cl-11.7 (Steady-State Formaldehyde Emission Test)

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 303 (1989)

Plywood for General Purposes -

BWR & MR/AA, AB, BB/Decorative and Commercial

29100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	For Physical and Chemical Testing complete testing charges Rs 29100.00
8(Dimensions & Tolerances - Width - Cl. 8)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
8(Dimensions & Tolerances - Squareness - Annexure C)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2500	GST @ 18% extra as applicable at present
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1500	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1500	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.3(Moisture Content - Part 1 of IS 1734)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500.00	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	600	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order

30 Sep, 2027

-
-

KSA LABS LLP, Vadodara

7186606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

ALL

12000 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Classification by appearance)	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-
Cl-6.1(Timber)	-	-
Cl-7.2.1(Thickness of veneers)	-	-
Cl-7.2.3(Grain Direction)	-	-
Cl-6.2(Adhesive)	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-
Cl-7.2.5.2(Splits)	-	-
Cl-7.2.5.3(Overlap)	-	-
Cl-8.1(Dimensions -length)	-	-
Cl-8.2(Thickness of the plywood boards)	-	-
Cl-8.3(Squareness)	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-
Cl-11.3.2(Mycological Test)	-	-
Cl-11.4(Moisture Content)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-11.6(Formaldehyde Content Test)	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-
Cl-7.2.4(Scarf Joints)	-	-

24 Jun, 2028

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

BIS, Patna Branch Laboratory (PBL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl. 4 (Grades)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl-11.6 (Formaldehyde Content Test)	-

-
-

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 303 (1989)

Plywood for General Purposes -

General Purpose Plywood

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	250	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-

19 Aug, 2027

-
-

BIS, Guwahati Branch Laboratory (GBL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.7 (Steady-State Formaldehyde Emission Test)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl. 4 (Grades)	-
Cl.5.1 (Type based on classification by appearance)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl.8.1 (Dimensions -width)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-13 (Marking)	-

-
Qty. required 2 No. i)Except Steady-State Formaldehyde Emission Test (Optional Test). ii) Test facility available for thickness upto 25 mm

Universal Testing and Research Centre (Division of Sustainable Stewardship Private Limited)

8169306

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Grade- MR/BWR/BWP, Type- A & B

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (i)(Blister)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (ii)(Checks)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (iv)(Dote)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (vi)(Joints)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xi)(Patches)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xii)(Splits)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.1(Timber)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.2(Adhesive)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.1(Thickness of veneers)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.3(Grain Direction)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.2(Splits)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.3(Overlap)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.1(Dimensions -length)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2(Thickness of the plywood boards)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.3(Squareness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.3.2(Mycological Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.4(Moisture Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.6(Formaldehyde Content Test)	-	4600	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	60000	20% Discount for BIS Samples (Optional Test, Mentioned charges are for the Steady State Formaldehyde Testing 60000/- , Testing Time 30Days)
Cl-9(WORKMANSHIP AND FINISH)	-	100	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.4(Scarf Joints)	-	0	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

28 Nov, 2027

-
Included w.e.f. 24.03.2025

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number