BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

143 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

BIS, Central Laboratory (CL)

None

IS 398 : Part 3 (1976)

Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
OK

BIS, Western Regional Laboratory (WRL)

None

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7, Table-1 (Diameter of Wire (mm))	-
Cl-7, Table-1 (Minimum Tensile Strength of Wire)	-
Cl-7, Table-1 (Minimum Elongation on 250 mm (percent))	-
Cl-8 (Freedom from Defects)	-
Cl-9.1.1 (Wires-Nominal Sizes)	-
Cl-9.2.1 (Stranded Conductors- Size)	-
Cl-10 (Joints in Wires)	-
11 (Stranding)	-
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
16.10, Table 3 (d.c. Resistance Test on Stranded Conductor)	-

-
Complete Test facility up to 80 square mm. For sizes above 80 square mm, Partial Test facility except Ultimate tensile Strength Test (Cl. 16.9) and Stress-Strain Test (Cl. 16.11)

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

178960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Mass of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Uniformity of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.10 (elec)(Surface condition test)	-	14490	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.11 (elec)(Corona Test)	-	19200	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.12 (elec)(Radio Interference Voltage Test)	-	42000	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
10.4 (mech)(Direction of lay)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	----
13.9 (elec)(The test of galvanising)	-	1210	170/- per wire 1210/- for 7 wires
8.2.1 (elec)(Size of complete conductor)	-	125	--
8.2.2 (elec)(Resistance of complete conductor)	-	5200	--

30 Nov, 2028

-
-

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

73250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.1 Table-1(Dimensional measurement of wires)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.3(Direction of Lay)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.2 Table 3(Lay Ratio of stranded conductors)	-	250	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.4 Table 1(Resistance of Aluminium wire)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.

30 Nov, 2028

-
-

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

166060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (mech)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Mass of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Uniformity of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.9 (elec)(Surface condition test)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.10 (elec)(Ultimate breaking load)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.11 (elec)(Stress-strain test)	-	48300	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.

30 Nov, 2028

-
-

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

33780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load before stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load after stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.5, Table 1(Resistance test)	-	520	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.6, Table 3(Measurement of lay ratio)	-	250	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.4(Wrapping test)	-	460	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
6(Freedom from defects)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
9.3(Stranding)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm

30 Nov, 2028

-
-

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	500	-
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-
Cl-6.2(zinc used for galvanizing)	-	1500	-
Cl-7(Freedom From Defects)	-	500	-
Cl-8.1(Wires-Nominal Sizes)	-	500	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	500	-
Cl-9.1(Joint in Wires)	-	300	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	500	-
Cl-13.3(Conductor- Visual examination)	-	500	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	500	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	1000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	500	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	500	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	300	-
Cl- 13.6(Steel wires- Breaking load test)	-	1000	-
Cl- 13.7(Steel wires- Ductility test)	-	1500	-
Cl- 13.8(Steel wires- Wrapping test)	-	1000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	1000	-
Cl-13.7.1(Torsion Test)	-	500	-
Cl-13.7.2(Elongation Test)	-	500	-
Cl-11.1(Standard Length)	-	0	-
Cl-11.2(Random Lengths)	-	0	-

29 Dec, 2028

-
Included w.e.f 17.03.2026 Exclusion: Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)

ATCC TEST LABS LLP

8172626

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Rs. 16000/- (Up to 100 Sq.mm), Rs. 90000/- (150 Sq.mm to 200 Sq.mm), Rs. 120000/- (400 Sq.mm to 560 Sq.mm)
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-
Cl-6.2(zinc used for galvanizing)	-	2000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	2000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	2000	-
Cl-9.1(Joint in Wires)	-	2000	-
Cl-9.2(Aluminium Wires)	-	2000	-
Cl-9.3(Galvanized Steel Wires)	-	2000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	30000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	30000	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	2000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	2000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	2000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	2000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl-11.1(Standard Length)	-	2000	-
Cl-11.2(Random Lengths)	-	2000	-

15 Jun, 2026

-
Included w.e.f. 17.03.2026 Exclusion: Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

1250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
7.1 Table-1(Dimensional measurement of wires)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.1(Stranding)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.3(Direction of Lay)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.4(Multiple layers of wires)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
11(Packing and Marking)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1000	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
12.2 Table 1(Breaking Load Test- After Stranding)	-	1000	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
12.3 Table 1(Elongation Test- After Stranding)	-	1000	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
12.4 Table 1(Resistance of Aluminium wire)	-	1000	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.2(Lay Ratio 24 wire layer)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.2(Lay Ratio 18 wire layer)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.2(Lay Ratio 12 wire layer)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
9.2(Lay Ratio 3/6 wire layer)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
7.2.1(Sizes)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands.

-
included w.e.f 30.01.2026

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

1250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load before stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load after stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.4(Wrapping test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.5, Table 1(Resistance test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.6, Table 3(Measurement of lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.3(Stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
6(Freedom from defects)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.1(Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.2(Lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.4(Multiple layer of wires)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.1(Resistivity)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.2(Density)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.4(Coefficient of Linear Expansion)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
5(Material)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.1.1(Nominal Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.2(Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load before stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load after stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.4(Wrapping test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.5, Table 1(Resistance test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.6, Table 3(Measurement of lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.3(Stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
6(Freedom from defects)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.1(Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.2(Lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.4(Multiple layer of wires)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.1(Resistivity)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.2(Density)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.4(Coefficient of Linear Expansion)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
5(Material)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.1.1(Nominal Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.2(Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding

-
Included w.e.f 17.02.2026

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

6950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-6.1.1(chemical composition of high carbon steel)	-	3000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-6.2(zinc used for galvanizing)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-7(Freedom From Defects)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-8.1(Wires-Nominal Sizes)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-9.1(Joint in Wires)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-9.2(Aluminium Wires)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-9.3(Galvanized Steel Wires)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.3(Conductor- Visual examination)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	3000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.16(Conductor- Radio interference voltage test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.4(Aluminium wires-Measurement of diameter)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.6(Aluminium wires -Breaking load test)	-	3000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.8(Aluminium wires- Wrapping test)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	3000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	3000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.4(Steel wires- Measurement of diameter)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.6(Steel wires- Breaking load test)	-	2500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.7(Steel wires- Ductility test)	-	3000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.8(Steel wires- Wrapping test)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.10(Steel wires- Galvanizing test)	-	5000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.7.1(Torsion Test)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.7.2(Elongation Test)	-	1500	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-11.1(Standard Length)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-11.2(Random Lengths)	-	1000	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-6(Material)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-6.1.1(chemical composition of high carbon steel)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-6.2(zinc used for galvanizing)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-7(Freedom From Defects)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-8.1(Wires-Nominal Sizes)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-9.1(Joint in Wires)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-9.2(Aluminium Wires)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-9.3(Galvanized Steel Wires)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.3(Conductor- Visual examination)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.16(Conductor- Radio interference voltage test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.4(Aluminium wires-Measurement of diameter)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.6(Aluminium wires -Breaking load test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.8(Aluminium wires- Wrapping test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.4(Steel wires- Measurement of diameter)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.6(Steel wires- Breaking load test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.7(Steel wires- Ductility test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.8(Steel wires- Wrapping test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl- 13.10(Steel wires- Galvanizing test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.7.1(Torsion Test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-13.7.2(Elongation Test)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-11.1(Standard Length)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-11.2(Random Lengths)	-	0	Rs. 6950/- for (upto 50 Sq.mm), Rs. 17500/- for (80 to 200 Sq.mm), Rs. 120000/- for (400 to 520 sq. mm) and Rs. 195000/- for (530 to 810 sq. mm)
Cl-6(Material)	-	0	-
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-7(Freedom From Defects)	-	0	-
Cl-8.1(Wires-Nominal Sizes)	-	0	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	0	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	0	-
Cl-13.3(Conductor- Visual examination)	-	0	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	0	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	0	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	0	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	0	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	0	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	0	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	0	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	0	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	0	-
Cl- 13.6(Steel wires- Breaking load test)	-	0	-
Cl- 13.7(Steel wires- Ductility test)	-	0	-
Cl- 13.8(Steel wires- Wrapping test)	-	0	-
Cl- 13.10(Steel wires- Galvanizing test)	-	0	-
Cl-13.7.1(Torsion Test)	-	0	-
Cl-13.7.2(Elongation Test)	-	0	-
Cl-11.1(Standard Length)	-	0	-
Cl-11.2(Random Lengths)	-	0	-

-
Included w.e.f 24.02.2026 "Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	5000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	5000	-
Cl-6(Material)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	5000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	5000	-
Cl- 13.8(Steel wires- Wrapping test)	-	5000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	5000	-
Cl-6.2(zinc used for galvanizing)	-	2000	-
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-

05 Aug, 2027

-
Included w.e.f. 17.02.2026 Exclusion: "Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

NATIONAL TEST HOUSE(SR), Chennai

6122704

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminum conductors, galvanized steel reinforced

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	600	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	600	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	600	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	599.98	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	999.99	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	999.99	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	599.99	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	600	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	600	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	-
13.7.2 (chem)(Mass of Zinc coating)	-	600	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	600	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	600	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	600	-
13.10 (elec)(Ultimate breaking load)	-	10000	-
13.11 (elec)(Stress-strain test)	-	10000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	600	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	600	-

28 Nov, 2028

-
-

NATIONAL TEST HOUSE(SR), Chennai

6122704

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Al stranded Conductors & Accessories for Overhead line

5625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	600	-
12.3, Table-1(Breaking load before stranding)	-	1500	-
12.3, Table-1(Breaking load after stranding)	-	1500	-
12.4(Wrapping test)	-	1000	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	1000	-
6(Freedom from defects)	-	500	-

28 Nov, 2028

-
-

NATIONAL TEST HOUSE(SR), Chennai

6122704

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Al alloy stranded conductor

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	600	-
7.1 Table-1(Dimensional measurement of wires)	-	600	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	600	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	600	-
9.3(Direction of Lay)	-	600	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1000	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1000	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	600	-
9.2(Lay Ratio 18 wire layer)	-	600	-
9.2(Lay Ratio 12 wire layer)	-	600	-
9.2(Lay Ratio 3/6 wire layer)	-	600	-

28 Nov, 2028

-
-

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

High conductivity Aluminium Alloy Stranded conductor

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	500	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	1000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	2000	-
16.6, Table 1(Elongation Test - before stranding)	-	2000	-
16.6, Table 1(Elongation Test - after stranding)	-	2000	-
16.7, Table 2(Resistivity Test)	-	2000	-
16.8(Wrapping Test)	-	1000	-
11(Stranding)	-	500	-
8(Freedom from defects)	-	500	-
Cl-5(MATERIAL COMPOSITION)	-	4000	-
Cl-7, Table-1(Diameter of Wire (mm))	-	1000	-
Cl-7, Table-1(Minimum Tensile Strength of Wire)	-	2000	-
Cl-7, Table-1(Minimum Elongation on 250 mm (percent))	-	1000	-
Cl-8(Freedom from Defects)	-	500	-
Cl-9.1.1(Wires-Nominal Sizes)	-	1000	-
Cl-9.2.1(Stranded Conductors- Size)	-	1000	-
Cl-10(Joints in Wires)	-	500	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	4000	-

28 Nov, 2028

-
Included w.e.f. 31.12.2025 "16.9, Table 3 (Ultimate Tensile Strength on Stranded Conductor) 16.11 (Stress-strain Test)"

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

Aluminium Conductors galvanized steel-reinforced

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Freedom From Defects)	-	500	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	500	-
Cl-9.1(Joint in Wires)	-	500	-
Cl-9.2(Aluminium Wires)	-	500	-
Cl-9.3(Galvanized Steel Wires)	-	500	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	500	-
Cl-13.3(Conductor- Visual examination)	-	200	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	1000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	1000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	500	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	500	-
Cl- 13.6(Steel wires- Breaking load test)	-	1000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	1000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	1000	-
Cl-6(Material)	-	500	-
Cl-6.1.1(chemical composition of high carbon steel)	-	1000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-13.7.1(Torsion Test)	-	500	-
Cl-13.7.2(Elongation Test)	-	1000	-
Cl-11.1(Standard Length)	-	200	-
Cl-11.2(Random Lengths)	-	200	-

28 Nov, 2028

-
Included w.e.f. 31.12.2025 "Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductor for Overhead Transmission

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	200	Rs.9000/- for 7 wire stands, Rs. 18000/- for 19 Strands, Rs.500/- for Separated Wire before Stranding (If provided)
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	200	-
9.3(Stranding)	-	200	-
6(Freedom from defects)	-	200	-
7.2.1(Sizes)	-	200	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	200	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	200	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
5(Material)	-	200	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	1000	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	200	-
9.3(Stranding)	-	100	-
6(Freedom from defects)	-	100	-
7.2.1(Sizes)	-	100	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	100	-
9.2(Lay ratio)	-	100	-
9.4(Multiple layer of wires)	-	100	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	1000	-
5(Material)	-	100	-
7.1.1(Nominal Sizes)	-	100	-
7.2.2(Resistance)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-

28 Nov, 2028

-
included w.e.f 05-01-2026

TVS LABS

8171826

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

Up to and including 80 sq mm

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	0	-
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-7(Freedom From Defects)	-	0	-
Cl-8.1(Wires-Nominal Sizes)	-	0	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	0	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	400	-
Cl-9.3(Galvanized Steel Wires)	-	400	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	500	-
Cl-13.3(Conductor- Visual examination)	-	400	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	500	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	750	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1500	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	600	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1500	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	500	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	750	-
Cl- 13.6(Steel wires- Breaking load test)	-	1500	-
Cl- 13.7(Steel wires- Ductility test)	-	1200	-
Cl- 13.8(Steel wires- Wrapping test)	-	600	-
Cl- 13.10(Steel wires- Galvanizing test)	-	1200	-
Cl-13.7.1(Torsion Test)	-	600	-
Cl-13.7.2(Elongation Test)	-	600	-
Cl-11.1(Standard Length)	-	0	-
Cl-11.2(Random Lengths)	-	0	-
Cl-6(Material)	-	0	-
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-7(Freedom From Defects)	-	0	-
Cl-8.1(Wires-Nominal Sizes)	-	0	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	0	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	0	-
Cl-13.3(Conductor- Visual examination)	-	0	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	0	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	0	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	0	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	0	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	0	-
Cl- 13.6(Steel wires- Breaking load test)	-	0	-
Cl- 13.7(Steel wires- Ductility test)	-	0	-
Cl- 13.8(Steel wires- Wrapping test)	-	0	-
Cl- 13.10(Steel wires- Galvanizing test)	-	0	-
Cl-13.7.1(Torsion Test)	-	0	-
Cl-13.7.2(Elongation Test)	-	0	-
Cl-11.1(Standard Length)	-	0	-
Cl-11.2(Random Lengths)	-	0	-
Cl-6(Material)	-	0	-
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-7(Freedom From Defects)	-	0	-
Cl-8.1(Wires-Nominal Sizes)	-	0	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	0	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	0	-
Cl-13.3(Conductor- Visual examination)	-	0	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	0	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	0	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	0	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	0	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	0	-
Cl- 13.6(Steel wires- Breaking load test)	-	0	-
Cl- 13.7(Steel wires- Ductility test)	-	0	-
Cl- 13.8(Steel wires- Wrapping test)	-	0	-
Cl- 13.10(Steel wires- Galvanizing test)	-	0	-
Cl-13.7.1(Torsion Test)	-	0	-
Cl-13.7.2(Elongation Test)	-	0	-
Cl-11.1(Standard Length)	-	0	-
Cl-11.2(Random Lengths)	-	0	-

18 Oct, 2028

-
Included w.e.f. 23.01.2026

TVS LABS

8171826

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	250	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1250	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1250	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	500	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	500	-
9.2(Lay Ratio 3/6 wire layer)	-	500	-

18 Oct, 2028

-
-

TVS LABS

8171826

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	-
13.7.2 (elec)(Mass of Zinc coating)	-	750	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-

18 Oct, 2028

-
-

TVS LABS

8171826

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1250	-
12.3, Table-1(Breaking load before stranding)	-	1250	-
12.3, Table-1(Breaking load after stranding)	-	1250	-
12.4(Wrapping test)	-	1000	-
12.5, Table 1(Resistance test)	-	1250	-
12.6, Table 3(Measurement of lay ratio)	-	1000	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	250	-

18 Oct, 2028

-
-

Alpha Test House Private Limited, Delhi

8131026

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

15000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-6.1.1(chemical composition of high carbon steel)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-6.2(zinc used for galvanizing)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-7(Freedom From Defects)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-8.1(Wires-Nominal Sizes)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-9.1(Joint in Wires)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-9.2(Aluminium Wires)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-9.3(Galvanized Steel Wires)	-	2000	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	500	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-13.3(Conductor- Visual examination)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	500	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	1000	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	0	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	0	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-13.16(Conductor- Radio interference voltage test)	-	0	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-13.4(Aluminium wires-Measurement of diameter)	-	650	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.6(Aluminium wires -Breaking load test)	-	850	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.8(Aluminium wires- Wrapping test)	-	550	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	2000	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	550	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.4(Steel wires- Measurement of diameter)	-	650	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.6(Steel wires- Breaking load test)	-	1285	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.7(Steel wires- Ductility test)	-	500	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.8(Steel wires- Wrapping test)	-	600	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl- 13.10(Steel wires- Galvanizing test)	-	1000	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-13.7.1(Torsion Test)	-	550	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-13.7.2(Elongation Test)	-	550	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-11.1(Standard Length)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)
Cl-11.2(Random Lengths)	-	100	Testing Charges for sizes (up to 80 sq. mm) Rs 15000, (100 sq. mm) Rs18000, (130 sq. mm) Rs 35000, (150 sq. mm to 400 sq. mm for 37 Strands) Rs 40000,(400 sq. mm,520 sq. mm,560 sq. mm,690 sq. mm for 49 Strands) Rs 55000, (420 sq. mm,530 sq. mm,810 sq. mm)

-
Included w.e.f 30.12.2025 "Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	500	-
Cl-6.1.1(chemical composition of high carbon steel)	-	500	-
Cl-6.2(zinc used for galvanizing)	-	500	-
Cl-7(Freedom From Defects)	-	100	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	500	-
Cl-9.1(Joint in Wires)	-	500	-
Cl-9.2(Aluminium Wires)	-	500	-
Cl-9.3(Galvanized Steel Wires)	-	500	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	500	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	1000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	2000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	2000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	500	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1500	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	1500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1500	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	1500	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	500	-
Cl- 13.6(Steel wires- Breaking load test)	-	500	-
Cl- 13.7(Steel wires- Ductility test)	-	1500	-
Cl- 13.8(Steel wires- Wrapping test)	-	1500	-
Cl- 13.10(Steel wires- Galvanizing test)	-	500	-
Cl-13.7.1(Torsion Test)	-	1200	-
Cl-13.7.2(Elongation Test)	-	1000	-
Cl-11.1(Standard Length)	-	500	-
Cl-11.2(Random Lengths)	-	500	-

30 Sep, 2027

-
Included w.e.f. 26.12.2025 Exclusion: "Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	500	Rs. 7000/- Up to 100 Sq.mm
Cl-6.1.1(chemical composition of high carbon steel)	-	1000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-7(Freedom From Defects)	-	500	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	500	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	1000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	1000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	0	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	0	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	1000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	1000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	1000	-
Cl- 13.6(Steel wires- Breaking load test)	-	1000	-
Cl- 13.7(Steel wires- Ductility test)	-	1000	-
Cl- 13.8(Steel wires- Wrapping test)	-	1000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	1000	-
Cl-13.7.1(Torsion Test)	-	1000	-
Cl-13.7.2(Elongation Test)	-	1000	-
Cl-11.1(Standard Length)	-	500	-
Cl-11.2(Random Lengths)	-	500	-

11 Mar, 2028

-
-

CIMEC Infralabs Private Limited

8195606

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Size: 25 to 300 Sq. mm, Stranded Conductor

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	Individual wire diameter measurement
12.3, Table-1(Breaking load before stranding)	-	1000	Nil
12.3, Table-1(Breaking load after stranding)	-	1000	Nil
12.4(Wrapping test)	-	250	Nil
12.5, Table 1(Resistance test)	-	1500	Nil
12.6, Table 3(Measurement of lay ratio)	-	500	Nil
9.3(Stranding)	-	100	Nil
6(Freedom from defects)	-	100	Nil
7.2.1(Sizes)	-	150	Nil
8, 8.1, 8.2(Joint in wires, except during stranding)	-	250	Nil
9.2(Lay ratio)	-	500	Nil
9.4(Multiple layer of wires)	-	250	Nil
4.1(Resistivity)	-	1500	Nil
4.2(Density)	-	250	Nil
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1500	A Physical Constant-Applicable, If required to check
5(Material)	-	100	Visual Examination
7.1.1(Nominal Sizes)	-	250	Nil
7.2.2(Resistance)	-	1500	Nil

14 Jan, 2029

-
-

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

148000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	2000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.8(Wrapping Test)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
11(Stranding)	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
8(Freedom from defects)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	12000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.11(Stress-strain Test)	-	40000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-5(MATERIAL COMPOSITION)	-	5600	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Diameter of Wire (mm))	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Minimum Tensile Strength of Wire)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Minimum Elongation on 250 mm (percent))	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-8(Freedom from Defects)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-9.1.1(Wires-Nominal Sizes)	-	2500	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-9.2.1(Stranded Conductors- Size)	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-10(Joints in Wires)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-

30 Sep, 2027

-
Included w.e.f 18.11.2025

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

----

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	100	Rs 10000 (up to 80 Sq.mm), Rs 18000 (100 SQ.MM), Rs 37000 (Above 100 SQ.MM and upto Including 200 SQ.MM), Rs 55000 (above 200 SQ.MM)
Cl-6.1.1(chemical composition of high carbon steel)	-	100	-
Cl-6.2(zinc used for galvanizing)	-	100	-
Cl-7(Freedom From Defects)	-	100	-
Cl-8.1(Wires-Nominal Sizes)	-	100	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	200	-
Cl-9.1(Joint in Wires)	-	100	-
Cl-9.2(Aluminium Wires)	-	100	-
Cl-9.3(Galvanized Steel Wires)	-	100	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	250	-
Cl-13.3(Conductor- Visual examination)	-	100	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	500	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	1000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	2500	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	500	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	250	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	500	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	200	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	200	-
Cl- 13.6(Steel wires- Breaking load test)	-	1000	-
Cl- 13.7(Steel wires- Ductility test)	-	200	-
Cl- 13.8(Steel wires- Wrapping test)	-	250	-
Cl- 13.10(Steel wires- Galvanizing test)	-	500	-
Cl-13.7.1(Torsion Test)	-	500	-
Cl-13.7.2(Elongation Test)	-	500	-
Cl-11.1(Standard Length)	-	200	-
Cl-11.2(Random Lengths)	-	200	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	2500	-

03 Oct, 2027

-
Included w.e.f 31.12.2025 Exclusion: Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)), Cl-13.16 (Conductor- Radio interference voltage test)

National Test House (NWR) - NTH, Jaipur

8122904

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	1000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	3000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	3000	-
16.6, Table 1(Elongation Test - before stranding)	-	1000	-
16.6, Table 1(Elongation Test - after stranding)	-	1000	-
16.7, Table 2(Resistivity Test)	-	3000	-
16.8(Wrapping Test)	-	1000	-
11(Stranding)	-	1000	-
8(Freedom from defects)	-	1000	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	7000	-
16.11(Stress-strain Test)	-	50000	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	3000	-

31 Dec, 2026

-
Included w.e.f.09.10.2025

IEC TEST LABS LLP

8165726

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

18000 View breakup
Rs. 18000/- (up to 100 Sq.mm), Rs. 100000/- (150 Sq.mm to 200 Sq.mm), Rs. 125000/- (400 Sq.mm to 560 Sq.mm)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Rs. 18000/- (up to 100 Sq.mm), Rs. 100000/- (150 Sq.mm to 200 Sq.mm), Rs. 125000/- (400 Sq.mm to 560 Sq.mm)
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	10000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	10000	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	5000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	5000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	5000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-
Cl-6(Material)	-	1000	-
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	2000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	2000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	10000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	10000	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	2000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	2000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	2000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	5000	-
Cl- 13.8(Steel wires- Wrapping test)	-	5000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	5000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-
Cl-6(Material)	-	1000	-
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	2000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	10000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	10000	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	1000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	1000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	2000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	2000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-

07 Sep, 2026

-
Included w.e.f 27.11.2025 Exclusion: Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)),Cl-13.16 (Conductor- Radio interference voltage test)

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found