BIS - LIMS (Laboratory Information Management System)

CENTRAL POWER RESEARCH INSTITUTE NOIDA

Regional Testing Laboratory, Plot No.-3A, Intuitional Area, Sector-62, Noda, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201309

9810803435 jaiswal@cpri.in

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15959 (Part 1) : 2011 (2011)

Data exchange for electricity meter - Reading, tariff and load control - Companion specification

130250 View breakup
-

Clause No.	Exclusion	Remark
4(ARCHITECTURE)	-	inclusive
5, Table no. 3(LOGICAL STRUCTURE OF METERS)	-	inclusive
6(USAGE OF DLMS/COSEM PROVISIONS)	-	inclusive
7, Table no. 5,6,7(ASSOCIATION AND DATA SECURITY)	-	inclusive
8, Table no.8,9,10,11(EVENT HANDLING)	-	inclusive
9(TOU METERING)	-	inclusive
10, table no. 14, 15,16(BILLING PERIODS)	-	inclusive
11, table no. 17, 18(HISTORIC DATA )	-	inclusive
12, Table no.19(COMMUNICATION PROFILES)	-	inclusive
13(COMMUNICATION SETUP OBJECTS)	-	inclusive
14, Table no. 20(CONNECT/DISCONNECT CONTROL)	-	inclusive

Complete

28 Mar, 2024

28 Mar, 2027

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

623530 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.8.1(Additional information)	-	17350	-
6.8(Connection diagrams and terminal marking)	-	0	Inclusive
6.8(BIS Standard Mark)	-	0	Inclusive
6.8(Marking of meters Name plate)	-	0	Inclusive
6.3(Clearance and creepage distances)	-	0	Inclusive
10.0(Smart Meter Functional Requirements)	-	11590	-
8, 9.5(Smart Meter Communicability)	-	150500	-
9.3(Test of Display)	-	0	Inclusive
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	0	Inclusive
6.4(Test of resistance to heat and fire)	-	8570	-
Note b of Table 1(Access and data read test)	-	11590	-
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	0	Inclusive
6.5(Test of protection against penetration of dust and water)	-	15750	-
6.5(Spring hammer test)	-	710	-
6.5(Shock test)	-	3200	-
6.5(Vibration test)	-	5170	-
6.9(Damp heat cyclic test)	-	19100	-
6.9(Cold test)	-	9390	-
6.9(Dry heat test)	-	9390	-
6.11(Surge Immunity test)	-	27790	-
6.11(Test of immunity to electromagnetic HF field)	-	27790	-
6.11(Test of immunity to electrostatic discharge)	-	7650	-
6.11(Fast transient burst test)	-	18530	-
6.11(Radio interference measurement)	-	27790	-
6.10.7(Test of immunity to earth/phase fault)	-	8110	-
6.10.5(Test of influence of heating)	-	4350	-
6.10.4(Test of influence of self-heating)	-	11360	-
6.10.3(Test of influence of short time over currents)	-	8930	-
6.10.2(Test of influence of supply voltage)	-	4810	-
6.10.1(Test of power consumption)	-	10430	-
6.12(Operation of Accessories)	-	1170	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	4530	-
6.12(Magnetic induction of External Origin 0.5mT)	-	4530	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	1520	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	1520	-
6.12(Voltage Unbalanced)	-	1520	-
6.12(Reversed Phase Sequence)	-	1350	-
6.12(Waveform 10% of 3rd Harmonics)	-	8920	-
6.12(Frequency Variation)	-	6030	-
6.12(Voltage Variation)	-	10660	-
6.12(Test of influence quantities)	-	0	Inclusive
6.12(Test of repeatability of error)	-	18420	-
6.12(Test of ambient temperature influence)	-	18420	-
6.12(Test of no-load condition)	-	1350	-
6.12(Test of starting condition)	-	2680	-
6.12(Test of meter constant)	-	2680	-
6.12(Test on limits of error)	-	16450	-
6.10.6(Insulation test)	-	1170	-
6.10.6(ac high voltage test)	-	1290	-
6.10.6(Impulse voltage test)	-	9270	-
6.7(Output device)	-	0	Inclusive
6.6(Display of measured values)	-	0	Inclusive
6.2.2(Insulating encased meter)	-	0	Inclusive
6.2.2(Terminal Cover(s))	-	0	Inclusive
6.2.1(Heat Deflection Test)	-	0	test facility not available.
6.2.1(Terminals, terminal block and protective earth terminal)	-	0	Inclusive
6.2(Communication module)	-	0	Inclusive
6.2(Window)	-	0	Inclusive
6.2(Meter case)	-	0	Inclusive
6.2(General Constructional requirements)	-	0	Inclusive
10(Smart Meter Functional Requirement)	-	0	Inclusive
9.5(Test for Smart meter communicability )	-	0	Inclusive
9.4(Test for Data Exchange Protocol)	-	0	Inclusive
6.5(Mechanical Requirement)	-	0	Inclusive
6.5(Mechanical Requirement)	-	0	Inclusive
6.5(Mechanical Requirement)	-	0	Inclusive
6.5(Mechanical Requirement)	-	0	Inclusive
6.5(Mechanical Requirement)	-	0	Inclusive
6.9(Climatic Codition)	-	0	Inclusive
6.9(Climatic Codition)	-	0	Inclusive
6.9(Climatic Codition)	-	0	Inclusive
6.9(Climatic Codition)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.1(Electrical Requirments)	-	0	Inclusive
6.1(Electrical Requirments)	-	0	Inclusive
6.1(Electrical Requirments)	-	0	Inclusive
6.1(Electrical Requirments)	-	0	Inclusive
6.1(Electrical Requirments)	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Inclusive
6.10.7((9.6 of IS 14697 ) Insulation Rtequirement )	-	0	Inclusive
6.10.6((9.5 of IS 14697 ) Insulation Requirement )	-	0	Inclusive
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	0	Inclusive
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	0	Inclusive
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	0	Inclusive
9.3(Measurement)	-	0	Inclusive
6.8(Inspection )	-	0	Inclusive
6.8(Inspection ( 7 of IS 14697) )	-	0	Inclusive
6.6(Inspection ( 6.10 of IS 14697))	-	0	Inclusive
6.7(Inspection ( 6.11 of IS 14697))	-	0	Inclusive
6.3(Measurement ( 6.6 of IS 14697))	-	0	Inclusive
6.2(General constructional Requirement)	-	0	Inclusive
6.2(General constructional Requirement)	-	0	Inclusive

Complete

28 Mar, 2024

28 Mar, 2027

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

583620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl. 7.1 a) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 b) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 c) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 d) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 e) of of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 f) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 g) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 h) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 j) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 k) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 m) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 p) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 7.1 n) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Inclusive
cl. 12.7.6.2 of IS 13779(Impulse voltage test)	-	0	Inclusive
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	0	Inclusive
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	0	Inclusive
cl. 11.1 of IS 13779(Limits of Error Due to Variation of tile Current)	-	0	Inclusive
cl. 11.2 of IS 13779(Limits of Error Due to Other Influence Quantities (Voltage-Variation, Frequency Variation, Phase-Sequence, Wave Form, Voltage-Unba.ance))	-	0	Inclusive
cl. 11.3 of IS 13779(Limits of Error Due to Ambien! Temperature Variation )	-	0	Inclusive
cl. 11.4 of IS 13779(Starting and Running w'th No-Load)	-	0	Inclusive
cl. 11.5 of IS 13779(Starting Current)	-	0	Inclusive
cl. 11.6 of IS 13779(Meter Constant)	-	1350	1050 for 1-phase
12.10.1 a) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	Inclusive
12.10.1 b) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	Inclusive
12.10.1 c) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	Inclusive
12.10.1 d) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	Inclusive
12.10.1 e) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	Inclusive
12.10.1 f) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	Inclusive
cl 11.1 of IS 13779(Limits of Error and Interpretation or Test Results)	-	0	Inclusive
12.16 a) of IS 13779(Limits of Error and Interpretation or Test Results)	-	0	Inclusive
12.16 b) of IS 13779(Limits of Error and Interpretation or Test Results)	-	0	Inclusive
12.16 c) of IS 13779(Limits of Error and Interpretation or Test Results)	-	0	Inclusive
12.15 of IS 13779(Test of Meter Constant/Registration)	-	0	Inclusive
12.14 of IS 13779(Test of Starting Conditions)	-	1350	1050 for 1-Phase
12.13 of IS 13779(Test of No-Load Condition)	-	1350	1050 for 1-phase
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	10430	6960 for 1-phase
12.17 of IS 13779(Repeatability of Error Test )	-	9210	-
12.11 of IS 13779(Test of Iniluence Quantities)	-	0	Inclusive
12.7.1 of IS 13779(Test of Power Consumption)	-	6960	2330 for 1-phase
12.7.2 of IS 13779(Test of Influence of Supply Voltage)	-	0	Inclusive
12.7.3 of IS 13779( Test of Influence of Short-time Overcurrents)	-	0	Inclusive
12.7.4 of IS 13779(Test of Influence of Self-Heating)	-	2680	2040 for 1-phase
12.7.5 of IS 13779(Test of Influence of Heating)	-	2090	1400 for 1-phase
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	8950	-
12.9.2 of IS 13779(Test for Immunity to Electrostatic Discharge (ESD))	-	5800	-
12.9.3 of IS 13779(Test for Immunity to EIectromagnetic HF Fields)	-	34740	-
12.9.4 of IS 13779(FastTransient BurstTest)	-	11600	-
12.9.5 of IS 13779(Radio Interference Measurement)	-	15300	-
12.6.1 of IS 13779(Dry Heat Test)	-	12080	-
12.6.2 of IS 13779(Cold Test)	-	12080	-
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	21880	-
12.3.1 of IS 13779(Shock Test)	-	33740	-
12.3.2 of IS 13779(Vibration Test)	-	38080	-
12.3.3 of IS 13779( Spring Hammer Test)	-	2460	-
12.5 a) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	210980	-
12.5 b) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	21090	-
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	7550	-
4.4.2.1 of IS 15844(Voltage range)	-	0	Inclusive
4.4.2.2 of IS 15844( Specified operating range )	-	0	Inclusive
4.4.2.3 of IS 15844(Extended operating range)	-	0	Inclusive
4.4.2.4 of IS 15844( Limit range of operation)	-	0	Inclusive
4.4.2.5 of IS 15844(Withstand range)	-	0	Inclusive
4.4.2.6 of IS 15844(Abnormal voltage conditions)	-	19690	6840 for 1-phase
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	30110	17370 for 1 -phase
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	48810	Inclusive
4.4.4 of IS 15844(Influence of Self-Heating)	-	2040	-
4.4.5 of IS 15844(Influence of Heating)	-	3610	2680 for 1-phase
4.4.6 of IS 15844(Insulation)	-	0	Inclusive
6.8(BIS Standard Mark)	-	0	Inclusive
6.8(Marking of smart meters Name plate)	-	22750	-
6.3(Clearance and creepage distances)	-	0	Inclusive
11.0(Smart meter functional requirements)	-	34740	-
9, 10.6(Test of Smart Meter Communicability)	-	34740	-
10.3(Test of Display)	-	0	Inclusive
8.0(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (Verification up to two Port))	-	150500	-
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	53390	-
7.2, 10.4(Dielectric strength (G-8))	-	0	Test Facility not available
7.2, 10.4(Minimum switched current (G-7))	-	0	Test Facility not available
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	0	Test Facility not available
7.2, 10.4(Fault current making capacity (G-5))	-	0	Test Facility not available
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	0	Test Facility not available
7.2, 10.4(Electrical endurance (G-3))	-	0	Test Facility not available
7.2, 10.4(Normal operation (G-2))	-	0	Test Facility not available
6.5(Test of resistance to heat and fire)	-	0	Inclusive
Note 1c of Table 1(Remote disconnect/connect)	-	0	Inclusive
Note 1b of Table 1(Access and data read test)	-	0	Inclusive
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	0	Inclusive
6.5(Protection against penetration of dust and water)	-	0	Inclusive
6.5(Spring Hammer test)	-	0	Inclusive
6.5(Shock test)	-	0	Inclusive
6.5(Vibration test)	-	0	Inclusive
6.9(Damp heat cyclic test)	-	0	Inclusive
6.9(Cold test)	-	0	Inclusive
6.9(Dry heat test)	-	0	Inclusive
6.11(Surge Immunity test)	-	21220	8720 for 1-phase
6.11(Test of immunity to electromagnetic HF field)	-	0	Inclusive
6.11(Test of immunity to electrostatic discharge)	-	0	Inclusive
6.11(Fast transient burst test)	-	11600	-
6.11(Radio interference measurement)	-	15300	-
6.10.7(Test of influence of immunity to earth fault)	-	8950	-
6.10.5(Test of influence of heating)	-	2050	1400 for 1-phase
6.10.4(Test of influence of self-heating)	-	2680	2040 for 1-phase
6.10.1(Test of influence of short time over currents)	-	0	Inclusive
6.10.1(Test of influence of supply voltage)	-	0	Inclusive
6.10.1(Test of power consumption)	-	10440	4610 for 1-phase
6.12(Operation of Accessories)	-	0	Inclusive
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	5770	-
6.12(Magnetic induction of External Origin 0.5mT)	-	5770	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	3860	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	3860	-
6.12(DC & Even Harmonics in the ac current circuit)	-	5800	-
6.12(Voltage Unbalanced)	-	1230	-
6.12(Reversed Phase Sequence)	-	1350	-
6.12(Waveform 10% of 3rd Harmonics)	-	8280	-
6.12(Frequency Variation)	-	2680	-
6.12(Voltage Variation)	-	6030	-
6.12(Test of influence quantities)	-	34620	-
6.12(Test of repeatability of error )	-	0	Inclusive
6.12(Test of ambient temperature influence)	-	0	Inclusive
6.12(Test of no-load condition)	-	0	Inclusive
6.12(Test of starting condition)	-	0	Inclusive
6.12(Test of meter constant)	-	0	Inclusive
6.12(Test on limits of error due to variation of the current)	-	8240	-
6.10.6(Insulation resistance test)	-	590	-
6.10.6(ac high voltage test)	-	650	-
6.10.6(Impulse voltage test)	-	9650	5240 for1-phase
6.8.1(Additional information)	-	0	Inclusive
6.8(Connection diagrams and terminal marking)	-	0	Inclusive
6.7(Output device)	-	0	Inclusive
6.6(Display of measured values)	-	0	Inclusive
6.2.2(Insulating encased meter)	-	0	Inclusive
6.2.2(Terminal Cover(s))	-	0	Inclusive
6.2.1(Heat Deflection Test)	-	0	Facility not available
6.2.1(Terminals, terminal block and protective earth ter-minal)	-	0	Inclusive
6.2(Communication module Load switch)	-	0	Inclusive
6.2(Window)	-	0	Inclusive
6.2(Meter case)	-	0	Inclusive
6.2(General and constructional requirements)	-	9270	-
Table 1 (Note 1)(Schedule of type tests)	-	0	Inclusive
Table 1 (Note 1)(Schedule of type tests)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
6.11(Electromagnetic Compatibility)	-	0	Inclusive
11(Smart Meter Functional Requirement)	-	0	Inclusive
10.6.2(Test for Smart meter communicability )	-	0	Inclusive
10.5(Test for Data Exchange Protocol)	-	0	Inclusive
10.4(Test for Load Switch)	-	0	Inclusive
10.3(Inspection)	-	0	Inclusive
6.8(Inspection)	-	0	Inclusive
6.8(Inspection)	-	0	Inclusive
6.7(Inspection)	-	0	Inclusive
6.7(Inspection)	-	0	Inclusive
6.6(Inspection)	-	0	Inclusive
6.3(Measurement)	-	0	Inclusive
6.2(General constructional Requirement)	-	17370	-
6.2(General constructional Requirement)	-	0	Inclusive

Complete

28 Mar, 2024

28 Mar, 2027

IS 15959 : Part 3 (2017)

Data exchange for electricity meter reading, tariff and load control - Companion specification: Part 3 smart meter (Transformer Operated KWh And KVarh, Class 0.2 S, 0.5 S And 1.0 S)

150500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SMART METER ASSOCIATION REQUIREMENTS)	-	0	-
5(In Home Display (IHD))	-	0	inclusive
6.1.1(Periodic Push)	-	0	inclusive
6.1.2(Utility Message)	-	0	inclusive
6.1.3(Consumer Message)	-	0	inclusive
6.1.4(Periodic Push)	-	0	inclusive
6.1.5(Event push)	-	0	inclusive
6.1.6(Special Message object)	-	0	inclusive
7.1(Encryption for data communications)	-	0	inclusive
7.2(Encryption and authentication for data transport)	-	0	inclusive
7.3(Key requirements and handling)	-	0	inclusive
8(IP communication profile support)	-	0	inclusive
9(Firm ware upgrade)	-	34740	inclusive
10(Connect/Disconnect)	-	34740	inclusive
11.1.1(Instantaneous Parameters)	-	0	inclusive
11.1.2(Snapshot of Instantaneous Parameters)	-	0	inclusive
11.1.3(Scaler Profile)	-	0	inclusive
12(BLOCK LOAD PROFILE PARAMETERS)	-	0	inclusive
13(DAILY LOAD PROFILE PARAMETERS)	-	0	inclusive
14(BILLING PROFILE PARAMETERS)	-	0	inclusive
15(EVENTS)	-	0	inclusive
16.1(Name Plate Details)	-	0	inclusive
16.2(Programmable Parameters)	-	0	inclusive
17.1(Instantaneous Parameters)	-	0	inclusive
17.3(Scaler Profile)	-	0	inclusive
17.2(Snapshot of Instantaneous Parameters)	-	0	inclusive
18.1(Scaler Profile)	-	0	inclusive
19.1(Scaler Profile)	-	0	inclusive
20(BILLING PROFILE PARAMETERS)	-	0	inclusive
25.1(Indian Event Reference Tables)	-	0	inclusive
25.2(Capture Parameters for Event as Applicable)	-	0	inclusive
25.3(Scaler Profile)	-	0	inclusive
26.1(Name Plate Details)	-	0	inclusive
26.2(Programmable Parameters)	-	0	inclusive
27(TESTING)	-	0	inclusive
28(TESTS FOR SMART METER COMMUNICABILITY)	-	34740	inclusive

Complete

28 Mar, 2024

28 Mar, 2027

IS 15959 : Part 2 (2016)

Data exchange for electricity meter reading, tarif and load control - Companion specification: Part 2 smart meter

150500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Smart meter association requirement)	-	0	inclusive
5(In Home Display (IHD))	-	0	inclusive
6.1.1(Periodic Push (SM to HES))	-	34740	inclusive
6.1.2(Utility Message (HES to IHD))	-	0	inclusive
6.1.3(Consumer Message (IHD to HES))	-	0	inclusive
6.1.4(Periodic Push (SM to IHD))	-	0	inclusive
6.1.5(Event Push (SM to HES))	-	34740	inclusive
6.1.6(Special message objects (SMO) for HES - IHD Communications)	-	0	inclusive
7.1(Encryption for data communications)	-	0	inclusive
7.2(Encryption and authentication for data transport)	-	0	inclusive
7.3(Key requirements and handling)	-	0	inclusive
8(IP communication profile support)	-	0	inclusive
9(Firm ware upgrade)	-	34740	inclusive
10(Connect/Disconnect)	-	34740	inclusive
12(Block Load Profile Parameters)	-	0	inclusive
13(Daily Load Profile Parameters)	-	0	inclusive
14(Billing Profile Parameters)	-	0	inclusive
15(Events)	-	0	inclusive
16(General Purpose Parameters)	-	0	inclusive
18(Block Load Profile Parameters)	-	0	inclusive
19(Daily Load Profile Parameters)	-	0	inclusive
20(Billing Profile Parameters)	-	0	inclusive
21(Events)	-	0	inclusive
22(General Purpose Parameters)	-	0	inclusive
23(Testing)	-	0	inclusive
24(Tests For Smart Meter Communicability)	-	34740	inclusive

Complete

28 Mar, 2024

28 Mar, 2027

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

269330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"12.8.6(Radio Interference Measurement)	-	0	Inclusive
"12.8.5(Surge Immunity Test)	-	0	Inclusive
6.1(General)	-	0	Inclusive
"12.8.4(Fast Transient Burst Test)	-	0	Inclusive
"12.8.3(Test for Immunity to Electromagnetic HF Fields)	-	0	Inclusive
6.2(Meter Case)	-	0	Inclusive
"12.8.2("Test for Immunity to Electrostatic Discharge (ESD) ")	-	0	Inclusive
6.3(Window)	-	0	Inclusive
12.4(Test of resistance to heat and fire)	-	0	Inclusive
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	0	Inclusive
12.5(Protection against penetration of dust and water)	-	0	Inclusive
12.3.3(Spring hammer test)	-	0	Inclusive
6.5(Terminal Cover(s))	-	0	Inclusive
12.3.1(Shock test)	-	0	Inclusive
12.3.2(Vibration test)	-	0	Inclusive
6.6(Clearance and Creepage Distance)	-	0	Inclusive
12.6.3(Damp Heat Cycle Test)	-	0	Inclusive
12.6.2(Cold Test)	-	0	Inclusive
6.7(Insulating Encased Meter)	-	0	Inclusive
12.6.1(Dry heat test)	-	0	Inclusive
6.10(Display of Measured Values)	-	0	Inclusive
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	11900	-
6.11(Output Device)	-	0	-
9.4 & 12.7.5(Influence of Heating)	-	2090	-
9.3 & 12.7.4(Influence of Self-heating)	-	9120	-
9.2.3 & 12.7.3(Short Time Over Current)	-	12740	-
7.1(Name Plate)	-	0	Inclusive
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	0	Inclusive
9.1 & 12.7.1(Power Consumption)	-	0	Inclusive
7.2(Connections, Diagrams and Terminal Marking)	-	0	Inclusive
11.2(Electrical fast transient burst)	-	0	Inclusive
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	0	Inclusive
9.5 & 12.7.6.2(Impulse voltage test)	-	0	Inclusive
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	0	Inclusive
11.2(Electromagnetic HF fields)	-	0	Inclusive
9.5 & 12.7.6.3(a.c. voltage test)	-	5060	-
11.2(Magnetic induction of external origin 0.5 mT)	-	0	Inclusive
12.7.6.4(Insulation resistance test)	-	0	Inclusive
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	0	Inclusive
11.1(Limits of Error Due to Variation of the Current)	-	20240	-
11.2(Auxiliary voltage ± 15 percent)	-	0	Inclusive
11.2(Continuous magnetic induction of external origin)	-	0	Inclusive
12.15(Interpretation of Test Results)	-	0	Inclusive
11.2(Voltage unbalance)	-	0	Inclusive
11.2(Reversed phase sequence)	-	0	Inclusive
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	14200	-
11.2(Wave form: 10 percent of third harmonic in the current)	-	0	Inclusive
11.2(Frequency variation)	-	0	Inclusive
11.2(Voltage variation)	-	0	Inclusive
11.4.1(Initial Start-up of the Meter)	-	0	Inclusive
11.7 & 12.16(Repeatability of Error Test)	-	17540	-
11.6 & 12.14(Meter Constant)	-	2680	-
12.13 & 11.5(Starting Current)	-	2680	-
11.4.2 & 12.12(Running with No-Load)	-	1340	-
6(General and Constructional requirements)	-	9270	-
6.1(General)	-	0	Inclusive
6.2(Meter case)	-	0	Inclusive
6.3(Window)	-	0	Inclusive
6.4(Terminals, terminals block(s) and protective earth terminal)	-	0	Inclusive
6.5(Terminal Cover(s))	-	0	Inclusive
6.6(Clearance and creepage distances)	-	0	Inclusive
6.7()	-	0	Inclusive
6.10(Display of measured values)	-	0	Inclusive
6.11(Output device)	-	0	Inclusive
7.1 a)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 b)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 c)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 d)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 e)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 f)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 g)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 h)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 j)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 k)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 m)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 n)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1 p)(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1(MARKING OF METERS : Name Plate)	-	0	Inclusive
7.1(MARKING OF METERS : Name Plate)	-	15060	-
7.1.1(BIS certification Marking)	-	0	Inclusive
7.2(Connection diagrams and terminal marking)	-	0	Inclusive
8(Climatic Conditions)	-	0	Inclusive
12.7.6.1, 9.5(Test of insulation Properties : General test conditions)	-	0	Inclusive
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	0	Inclusive
12.7.6.2, 9.5()	-	0	Inclusive
9.5, 12.7.6.2(Impulse voltage test)	-	0	Inclusive
12.7.6.3, 9.5(ac Voltage test)	-	0	Inclusive
9.5, 12.7.6.3(ac Voltage test)	-	0	Inclusive
12.7.6.4, 9.5()	-	0	Inclusive
9.5, 12.7.6.4()	-	0	Inclusive
12.9.1(Test of Accuracy Requirements : General Test Conditions)	-	0	Inclusive
9.1, 12.7.1(Test of Power Consumption)	-	0	Inclusive
12.7.1, 9.1(Test of Power Consumption)	-	0	Inclusive
9.2.1(Test of Influence of Supply Voltage)	-	0	Inclusive
9.2.2, 12.7.2(Test of Influence of Supply Voltage)	-	11580	-
12.7.2, 9.2.2(Test of Influence of Supply Voltage)	-	0	Inclusive
9.2.3 12.7.3(Test of Influence of Short-time Overcurrents)	-	0	Inclusive
12.7.3, 9.2.3()	-	0	Inclusive
9.3, 12.7.4(Test of Influence of Self-Heating)	-	0	Inclusive
12.7.4, 9.3(Test of Influence of Self-Heating)	-	0	Inclusive
9.4, 12.7.5(Test of Influence of Heating)	-	0	Inclusive
12.7.5, 9.4(Test of Influence of Heating)	-	0	Inclusive
9.6, 12.17(Test of Immunity to Earth/Phase Fault)	-	0	Inclusive
12.17, 9.6(Test of Immunity to Earth/Phase Fault)	-	0	Inclusive
10.1, 12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	9560	-
12.8.2, 10.1(Test for Immunity to Electrostatic Discharge (ESD))	-	0	Inclusive
10.1, 12.8.3(Test for immunity to electromagnetic HF field)	-	38500	-
12.8.3, 10.1(Test for immunity to electromagnetic HF field)	-	0	Inclusive
10.1, 12.8.4(Fast Transient Burst Test)	-	13030	-
12.8.4, 10.1(Fast Transient Burst Test)	-	0	Inclusive
10.1, 12.8.5(Surge Immunity test)	-	27800	-
12.8.5, 10.1(Surge Immunity test)	-	0	Inclusive
12.8.6, 10.2(Radio Interference Measurement)	-	10720	-
10.2, 12.8.6(Radio Interference Suppression)	-	0	Inclusive
11.1(Limits of error due to variation of the current)	-	0	Inclusive
12.15(Limits of Error and Interpretation or Test Results)	-	0	Inclusive
11.2, 12.10(Limits of error due to other Influence Quantities)	-	62250	-
12.10, 11.2(Test of Influence Quantities)	-	0	Inclusive
11.3, 12.11(Test of Ambient Temperature Influence)	-	0	Inclusive
12.11, 11.3(Test of Ambient Temperature Influence)	-	0	Inclusive
11.4, 12.12(Test of No-Load Condition)	-	0	Inclusive
12.12, 11.4(Test of No-Load Condition)	-	0	Inclusive
11.5, 12.13(Test of Starting Conditions)	-	0	Inclusive
12.13, 11.5(Test of Starting Conditions)	-	0	Inclusive
11.6, 12.14(Meter Constant)	-	0	Inclusive
12.14, 11.6(Test of Meter Constant/Registration)	-	0	Inclusive
11.7, 12.16(Repeatability of Error Test)	-	0	Inclusive
12.16, 11.7(Repeatability of Error Test)	-	0	Inclusive
12.3.1(Shock Test)	-	31710	-
12.3.2(Vibration Test)	-	36340	-
12.3.3(Spring Hammer Test)	-	2480	-
6.8, 12.4(Test of Resistance to Heat and Fire)	-	7550	-
12.4, 6.8(Test of Resistance to Heat and Fire)	-	0	Inclusive
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	22780	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
12.6.1(Dry Heat Test)	-	13020	-
12.6.2(Cold Test)	-	13020	-
12.6.3(Damp Heat Cycle Test)	-	22230	-

Complete

28 Mar, 2024

28 Mar, 2027

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

290000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	The complete testing charges applicable will be intimated through performa invoice
4(INSULATION : MATERIALS)	-	0	The complete testing charges applicable will be intimated through performa invoice
5.1(FILLER AND INNER SHEATH)	-	0	The complete testing charges applicable will be intimated through performa invoice
5.2(FILLER AND INNER SHEATH)	-	0	The complete testing charges applicable will be intimated through performa invoice
6(ARMOURING)	-	0	The complete testing charges applicable will be intimated through performa invoice
7(OUTER SHEATH)	-	0	The complete testing charges applicable will be intimated through performa invoice
8.1(CONDUCTOR: CONSTRUCTION)	-	0	The complete testing charges applicable will be intimated through performa invoice
8.2(PROTECTIVE BARRIER)	-	0	The complete testing charges applicable will be intimated through performa invoice
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	The complete testing charges applicable will be intimated through performa invoice
9.1(Insulation Applied by extrusicn)	-	0	The complete testing charges applicable will be intimated through performa invoice
9.2(Thickness of Insulation - Average)	-	1800	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
9.3(Thickness of Insulation - Minimum)	-	1800	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
9.4(Application of Insulation)	-	0	The complete testing charges applicable will be intimated through performa invoice
10.1(Core Identification)	-	0	The complete testing charges applicable will be intimated through performa invoice
10.2(Core Identification- Neutral)	-	0	The complete testing charges applicable will be intimated through performa invoice
10.3(Core Identification by number )	-	0	The complete testing charges applicable will be intimated through performa invoice
10.4(Core Identification by number - Neutral )	-	0	The complete testing charges applicable will be intimated through performa invoice
11(LAVING UP OF CORES)	-	0	The complete testing charges applicable will be intimated through performa invoice
12.1 & 12.2(Inner sheath : Application)	-	0	The complete testing charges applicable will be intimated through performa invoice
12.3(Thickness of Inner Sheath)	-	1800	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
13.1(Armouring: Application)	-	0	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
13.1.2(Armouring: Coverage )	-	3300	The complete testing charges applicable will be intimated through performa invoice
13.1.3(Armouring: Direction of Lay )	-	0	The complete testing charges applicable will be intimated through performa invoice
13.2(Type of armour )	-	0	The complete testing charges applicable will be intimated through performa invoice
13.3(Armouring : Dimensions -Wire Diameter)	-	1100	The complete testing charges applicable will be intimated through performa invoice
13.3(Armouring : Dimensions -Formed wire )	-	1100	The complete testing charges applicable will be intimated through performa invoice
13.4(Armour: Joint)	-	0	The complete testing charges applicable will be intimated through performa invoice
13.5(Armouring : Resistance Test)	-	2750	The complete testing charges applicable will be intimated through performa invoice
13.6 a)(ARMOURING: Tensile Strength)	-	3650	The complete testing charges applicable will be intimated through performa invoice
13.6 b)(ARMOURING: Elongation )	-	3650	The complete testing charges applicable will be intimated through performa invoice
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	650	The complete testing charges applicable will be intimated through performa invoice
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	650	The complete testing charges applicable will be intimated through performa invoice
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	850	The complete testing charges applicable will be intimated through performa invoice
13.6 f)(ARMOURING: Mass of zinc coating )	-	850	The complete testing charges applicable will be intimated through performa invoice
13.6 g)(ARMOURING: Resistivity)	-	2750	The complete testing charges applicable will be intimated through performa invoice
14.1(Outer Sheath : Application)	-	0	The complete testing charges applicable will be intimated through performa invoice
14.2(Colour of outer sheath)	-	0	The complete testing charges applicable will be intimated through performa invoice
14.3(Thickness of outer sheath - AVERAGE)	-	1800	The complete testing charges applicable will be intimated through performa invoice
14.3(Thickness of outer sheath - minimum)	-	1800	The complete testing charges applicable will be intimated through performa invoice
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1750	The complete testing charges applicable will be intimated through performa invoice
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 a) iii)(Wrapping test (for aluminium))	-	650	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 a) iv)(Resistance test - Main conductor)	-	2750	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 a) iv)(Resistance test - Neutral conductor)	-	2750	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	The complete testing charges applicable will be intimated through performa invoice
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	The complete testing charges applicable will be intimated through performa invoice
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased. and The complete testing charges applicable will be intimated through performa invoice
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	2750	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	1200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	0	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	The complete testing charges applicable will be intimated through performa invoice
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	The complete testing charges applicable will be intimated through performa invoice
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	6200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1200	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) v) (Sheath : Hot deformation)	-	2650	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) vi) (Sheath : Heat shock test)	-	2650	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 e) vii) (Sheath : Thermalstability)	-	3600	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1400	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
16.2(HIGH VOLTAGE TEST )	-	1600	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
16.3(FLAMMABILITY TEST : Period of Burning )	-	1900	The test charges indicated are for the measurement of one core, as per the number of cores the charges will be increased and the complete testing charges applicable will be intimated through performa invoice
16.3(FLAMMABILITY TEST : Unaffected length )	-	0	The complete testing charges applicable will be intimated through performa invoice
16.9(Oxygen Index Test)	-	0	The complete testing charges applicable will be intimated through performa invoice
16.1(Flame Retardance Test on Single Cables)	-	0	The complete testing charges applicable will be intimated through performa invoice
16.11(Flame Retardance Test on Bunched Cables)	-	0	The complete testing charges applicable will be intimated through performa invoice
16.13(Test for Halogen Acid Gas Evolution)	-	0	The complete testing charges applicable will be intimated through performa invoice
16.14(Temperature Index)	-	0	The complete testing charges applicable will be intimated through performa invoice
17.1(Manufacturer'. ldeadentificatioa)	-	0	The complete testing charges applicable will be intimated through performa invoice
17.2(cable Indentification )	-	0	The complete testing charges applicable will be intimated through performa invoice
17.3(cable Code )	-	0	The complete testing charges applicable will be intimated through performa invoice
15.4 (a)(Cold bend)	-	0	The complete testing charges applicable will be intimated through performa invoice
15.4 (b)(Cold impact)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 1(Ageing in air oven - Elongation on Insulation)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 1(Ageing in air oven - Elongation on Insulation)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 4(Copper purity test)	-	0	The complete testing charges applicable will be intimated through performa invoice
Cl No. 16.15(Smoke density test)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 2(Cold Impact test for Outer sheath)	-	0	The complete testing charges applicable will be intimated through performa invoice
Table 2(Cold bend test for Outer sheath)	-	0	The complete testing charges applicable will be intimated through performa invoice
Cl 16(Halogen Acid Gas Test)	-	0	The complete testing charges applicable will be intimated through performa invoice
Cl 16(Halogen Acid Gas Test)	-	0	The complete testing charges applicable will be intimated through performa invoice
Cl 16(Halogen Acid Gas Test)	-	0	The complete testing charges applicable will be intimated through performa invoice
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	The complete testing charges applicable will be intimated through performa invoice
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	The complete testing charges applicable will be intimated through performa invoice

Complete

28 Mar, 2024

28 Mar, 2027

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

205640 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	17550	-
5.1(Standard Reference Voltages)	-	0	-
5.2(Standard Basic Currents)	-	0	-
5.3(Rated Maximum Current)	-	0	-
5.4(Standard Frequency)	-	0	-
6.1(General)	-	0	-
6.2(Meter Case)	-	0	-
12.16 & 11.7(Test of repeatability of error)	-	8770	inclusive
6.3(Window)	-	0	-
6.4(Terminals, terminal block and protective earth terminal)	-	0	-
6.5(Terminals covers and Extended Terminal Cover)	-	0	-
6.6(Clearance and creepage distances)	-	940	Inclusive
12.15 & 11.6(Test of meter constant)	-	1340	1050 for single phase meter
6.7(Insulating encased meter)	-	0	-
6.10(Display of measured values)	-	0	-
6.11(Output device)	-	0	-
7.1(Name Plate)	-	0	-
7.2(Connection diagrams and terminal marking)	-	0	-
12.3.1(Shock test)	-	33460	30200 for single phase meter
12.14 & 11.5(Test of starting condition)	-	1340	1050 for single phase meter
12.3.2(Vibration test)	-	38090	34830 for single phase meter
12.13 & 11.4(Test of no-load condition)	-	1340	1050 for single phase meter
12.3.3(Spring hammer test)	-	2480	-
12.4(Test of resistance to heat and fire)	-	7550	-
12.12 & 11.3(Test of ambient temperature influence)	-	5220	3480 for single phase meter
12.5(Test of protection against penetration of dust and water)	-	20900	18940 for single phase meter
11.2(Test on limits of error due to other influence quantities)	-	0	-
12.6.1(Dry heat test)	-	14770	12810 for single phase meter
12.6.2(Cold test)	-	14770	12810 for single phase meter
11.1(Test on limits of error due to variation of current)	-	8240	4120 for single phase meter
12.6.3(Damp heat cyclic test)	-	23980	22020 for single phase meter
12.9.5(Surge Immunity Test)	-	22160	9210 for single phase meter
12.7.1(Test of power consumption)	-	6960	2330 for single phase meter
12.9.6(Radio Interference Measurement)	-	6960	6960 for single phase meter
12.7.1(Test of power consumption)	-	0	-
12.9.4(Fast transient burst test)	-	9270	5800 for single phase meter
12.7.2(Test of influence of supply voltage)	-	2970	2210 for single phase meter
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	0	-
12.9.3(Test of Immunity to electromagnetic HF field)	-	34740	-
12.9.2(Test of Immunity to electrostatic discharge)	-	5800	-
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	0	-
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	0	-
12.8(Test of immunity to earth/phase fault)	-	6220	-
12.7.3(Test of influence of short time over currents)	-	5220	-
12.7.6.4(Insulation resistance test)	-	590	-
12.7.4(Test of Influence of self heating)	-	2680	-
12.7.5(Test of influence of heating)	-	2090	-
12.7.6.2(Impulse voltage test)	-	6960	3480 for single phase meter
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	0	Inclusive
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	0	Inclusive
12.7.6.3(ac high voltage test)	-	650	-
12.7.6.4(Insulation resistance test)	-	620	-
6(General and Constructional requirements)	-	9270	-
6.1(General)	-	0	-
6.2(Meter case)	-	0	-
6.3(Window)	-	0	-
6.4(Terminals, terminals block(s) and protective earth terminal)	-	0	-
6.5(Terminal Cover(s))	-	0	-
6.6(Clearance and creepage distances)	-	0	-
6.7(Insulating encased meter)	-	0	-
6.10(Display of measured values)	-	0	-
6.11(Output device)	-	0	-
7.1 a)(MARKING OF METERS : Name Plate)	-	0	-
7.1 b)(MARKING OF METERS : Name Plate)	-	0	-
7.1 c)(MARKING OF METERS : Name Plate)	-	0	-
7.1 d)(MARKING OF METERS : Name Plate)	-	0	-
7.1 e)(MARKING OF METERS : Name Plate)	-	0	-
7.1 f)(MARKING OF METERS : Name Plate)	-	0	-
7.1 g)(MARKING OF METERS : Name Plate)	-	0	-
7.1 h)(MARKING OF METERS : Name Plate)	-	0	-
7.1 j)(MARKING OF METERS : Name Plate)	-	0	-
7.1 k)(MARKING OF METERS : Name Plate)	-	0	-
7.1 m)(MARKING OF METERS : Name Plate)	-	0	-
7.1 n)(MARKING OF METERS : Name Plate)	-	0	-
7.1 p)(MARKING OF METERS : Name Plate)	-	0	-
7.1(MARKING OF METERS : Name Plate)	-	0	-
7.1(MARKING OF METERS : Name Plate)	-	0	-
7.1(MARKING OF METERS : Name Plate)	-	0	-
7.1(MARKING OF METERS : Name Plate)	-	15060	-
7.1.1(BIS certification Marking)	-	0	-
7.2(Connection diagrams and terminal marking)	-	0	-
8(Climatic Conditions)	-	0	-
12.7.6.1, 9.5(Test of insulation Properties : General test conditions)	-	0	-
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	0	-
12.7.6.2, 9.5(Impulse voltage test)	-	0	Inclusive
9.5, 12.7.6.2(Impulse voltage test)	-	0	Inclusive
12.7.6.3, 9.5(ac Voltage test)	-	0	Inclusive
9.5, 12.7.6.3(ac Voltage test)	-	0	Inclusive
12.7.6.4, 9.5(Insulation resistance test)	-	0	Inclusive
9.5, 12.7.6.4(Insulation resistance test)	-	0	Inclusive
12.10.1(Test of Accuracy Requirements : General Test Conditions)	-	0	Inclusive
12.7.1, 9.1(Test of Power Consumption)	-	0	Inclusive
9.1, 12.7.1(Test of Power Consumption)	-	0	Inclusive
9.2.1(Test of Influence of Supply Voltage)	-	0	Inclusive
12.7.2, 9.2.2(Test of Influence of Supply Voltage)	-	0	Inclusive
9.2.2, 12.7.2(Test of Influence of Supply Voltage)	-	0	Inclusive
12.7.3, 9.2.3(Test of Influence of Short-time Overcurrents)	-	0	Inclusive
9.2.3, 12.7.3(Test of Influence of Short-time Overcurrents)	-	0	Inclusive
12.7.4, 9.3(Test of Influence of Self-Heating)	-	0	Inclusive
9.3, 12.7.4(Test of Influence of Self-Heating)	-	0	Inclusive
12.7.5, 9.4(Test of Influence of Heating)	-	0	Inclusive
9.4, 12.7.5(Test of Influence of Heating)	-	0	Inclusive
12.8, 9.6(Test of Immunity to Earth/Phase Fault)	-	0	Inclusive
9.6, 12.8(Test of Immunity to Earth/Phase Fault)	-	0	Inclusive
10.1, 12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	0	Inclusive
12.9.2, 10.1(Test for Immunity to Electrostatic Discharge (ESD))	-	0	Inclusive
10.1, 12.9.3(Test for immunity to electromagnetic HF field)	-	0	Inclusive
12.9.3, 10.1(Test for immunity to electromagnetic HF field)	-	0	Inclusive
10.1, 12.9.4(Fast Transient Burst Test)	-	0	Inclusive
12.9.4, 10.1(Fast Transient Burst Test)	-	0	Inclusive
10.1, 12.9.5(Surge Immunity test)	-	0	Inclusive
12.9.5, 10.1(Surge Immunity test)	-	0	Inclusive
12.9.6, 10.2(Radio Interference Measurement)	-	0	Inclusive
10.2, 12.9.6(Radio Interference Measurement)	-	0	Inclusive
11.1(Limits of error due to variation of the current)	-	0	Inclusive
12.16(Limits of Error and Interpretation or Test Results)	-	0	Inclusive
11.2, 12.11(Limits of error due to other Influence Quantities)	-	30350	-
12.11, 11.2(Test of Influence Quantities)	-	0	Inclusive
11.3, 12.12(Test of Ambient Temperature Influence)	-	0	Inclusive
12.12, 11.3(Test of Ambient Temperature Influence)	-	0	Inclusive
11.4, 12.13(Test of No-Load Condition)	-	0	Inclusive
12.13, 11.4(Test of No-Load Condition)	-	0	Inclusive
11.5, 12.14(Test of Starting Conditions)	-	0	Inclusive
12.14, 11.5(Test of Starting Conditions)	-	0	Inclusive
11.6, 12.15(Meter Constant)	-	0	Inclusive
12.15, 11.6(Test of Meter Constant/Registration)	-	0	Inclusive
11.7, 12.17(Repeatability of Error Test)	-	0	Inclusive
12.17, 11.7(Repeatability of Error Test)	-	0	Inclusive
12.3.1(Shock Test)	-	0	Inclusive
12.3.2(Vibration Test)	-	0	Inclusive
12.3.3(Spring Hammer Test)	-	0	Inclusive
6.8, 12.4(Test of Resistance to Heat and Fire)	-	0	Inclusive
12.4, 6.8(Test of Resistance to Heat and Fire)	-	0	Inclusive
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	0	Inclusive
12.6.1(Dry Heat Test)	-	0	Inclusive
12.6.2(Cold Test)	-	0	Inclusive
12.6.3(Damp Heat Cycle Test)	-	0	Inclusive

Complete

28 Mar, 2024

28 Mar, 2027

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

212050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	6000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	3000	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	11820	-
21.2 d)(Measurement of no-load loss and current)	-	1000	-
21.2 e)(Measurement of insulation resistance)	-	3000	-
21.2 f)(Induced over-voltage withstand test)	-	3710	-
21.2 g)( Separate-source voltage withstand test)	-	2000	-
21.5.3.3(Oil leakage test)	-	6380	-
21.3(a )(Lightning impulse test)	-	77980	-
21.3(b)(Temperature-rise test)	-	33810	-
21.4 a)( Determination of sound levels)	-	33350	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	12760	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	6380	-
21.5.2.3( Oil leakage test (routine test))	-	6380	-
21.4 c(No load current at 112.5 percent voltage.)	-	1000	-
21.4 e(BDV and moisture content of oil in the transformer)	-	3480	-
13.1(Marking (Rating Plates))	-	0	-
13.2(Terminal Marking Plate)	-	0	-
13.3(Marking )	-	0	-
13.4(Marking)	-	0	-
13.4.1(Marking)	-	0	-
21.4 d(Paint adhesion tests)	-	0	-
14.1(MOUNTING ARRANGEMENT)	-	0	-
14.2(MOUNTING ARRANGEMENT)	-	0	-
14.3(MOUNTING ARRANGEMENT)	-	0	-
14.4(MOUNTING ARRANGEMENT)	-	0	-
15.1.1(TRANSFORMER TANK : Construction)	-	0	-
15.1.2(TRANSFORMER TANK : Construction)	-	0	-
15.1.3(TRANSFORMER TANK : Construction)	-	0	-
15.1.4(TRANSFORMER TANK : Construction)	-	0	-
15.1.5(TRANSFORMER TANK : Construction)	-	0	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	INCLUSIVE
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	INCLUSIVE
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	0	INCLUSIVE
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	0	INCLUSIVE
21.5.3.3(Oil leakage test (routine test))	-	0	INCLUSIVE
15.5(Total Dry Film Paint Thickness)	-	0	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	0	-
11(Minimum clearance in Air)	-	0	-
16(Conservator for Non-sealed type Transformers)	-	0	-
20(Fittings)	-	0	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	17820	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	INCLUSIVE
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	INCLUSIVE
6.8 (100%)(Total losses at 100 % load (Watts))	-	17820	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	INCLUSIVE
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	INCLUSIVE
21.5.1.3(Oil leakage test upto 200 KVA)	-	0	INCLUSIVE
9.1a)(CRGO Electrical Steel)	-	0	-
9.1 b)(Amorphous core material)	-	0	-
9.1 c)(Copper/Aluminium conductor)	-	0	-
9.1 d)(Kraft paper)	-	0	-
9.1 e)(Press Board)	-	0	-
9.1 f)(Mineral oil)	-	0	-
10(Terminal Arrangement)	-	0	-
15.2(Pressure and Vacuum Requirements)	-	0	-
15.4(Gasket)	-	0	-
19(Tolerances)	-	0	-
18(Efficiency and regulation)	-	0	-
4(Service Conditions)	-	0	-
5(General )	-	0	-
6.1(Rating)	-	0	-
6.2(Rated frequency)	-	0	-
6.3(Nominal system voltage)	-	0	-
6.4(Basic Insulation level )	-	0	-
6.5(No-Load Voltage Ratios)	-	0	-
6.6(Winding connections and phase displacement)	-	0	-
6.7(Tapping Range and Tapping Method)	-	0	-
6.8(Losses and impedance values)	-	0	-
6.9(Permissible Flux Density and Over Fluxing )	-	0	-
6.1(Limits of Temperature-rise)	-	0	-
7(Technical Parameters of three phase distribution trasnformers higher than 200kva)	-	0	-
8(Technical Parameters of single phase distribution transformers UP to and including 25 KVA )	-	0	-
9(Standard Materials)	-	0	-
10(Terminal arrangment )	-	0	-
11(Minimum Clearnaces air )	-	0	-
12(Connectors )	-	0	-
13(Marking )	-	0	-
14(Mounting arrangement)	-	0	-
15(Trasnformer Tank )	-	0	-
16(Conservator for Non-Sealed type Transformers)	-	0	-
18(Efficiency and Regulation)	-	0	-
19(Tolerances)	-	0	-
20(Fittings)	-	0	-
21(General )	-	0	-
22(Information required with enquiry and order )	-	0	-

Complete

28 Mar, 2024

28 Mar, 2027

Bureau of Indian Standards

The National Standards Body of India

CENTRAL POWER RESEARCH INSTITUTE NOIDA

Regional Testing Laboratory, Plot No.-3A, Intuitional Area, Sector-62, Noda, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201309

9810803435 jaiswal@cpri.in

Scope List