BIS - LIMS (Laboratory Information Management System)

BIS, Western Regional Laboratory (WRL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- wrol@bis.gov.in

Scope List

Reset

66 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

Rs.14080/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-

-
-

IS 248 (2023)

SODIUM BISULPHITE TECHNICAL SODIUM METABISULPHITE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Description)	-
Cl-3.2,Table 1,sl.no-i (Purity (as SO2 content))	-
Cl-3.2,Table 1,sl.no-ii (pH of 5 percent solution)	-
Cl-3.2,Table 1,sl.no-iii (Matter insoluble in water)	-
Cl-3.2,Table 1,sl.no-iv (Iron (as Fe),)	-
Cl-3.2,Table 1,sl.no-v (Heavy metals (as Pb),)	-
Cl-3.2,Table 1,sl.no-vi (Appearance of solution)	-

-
-

IS 14781 (2000)

Sodium thiosulphate - Specification

Rs. 6960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (GRADES)	-
4 (REQUIREMENTS)	-
4.1 (Description)	-
4.2 (Solution in Water)	-
4.3, Table No - 1 , 1), i) (Sodium thiosulphate (as Na2S203.5H20). percent by mass)	-
4.3, Table No - 1 , 1), ii) (pH of 10 percent solution)	-
4.3, Table No - 1 , 1), iii) (Insoluble matter and metals other than alkali metals, percent by mass, Max)	-
4.3, Table No - 1 , 1), iv) (Sodium sulphide (as Na.$G), percent by mass, Max)	-
4.3, Table No - 1 , 1), v) (Heavy metals (as Pb), percent by mass, Max)	-
4.3, Table No - 1 , 1), vi) (Iron (as Fe), percent by mass, Max)	-
4.3, Table No - 1 , 1), vii) (Calcium (as Ca). percent by mass, Max)	-
4.3, Table No - 1 , 1), viii) (Sulphate and sulphite (as SO4), percent by mass, Max)	-
4.3, Table No - 1 , 1), ix) (Arsenic (as As2O3), percent by mass, Max)	-
5 (PACKING AND MARKING)	-

-
-

IS 11673 : Part 1 (2019)

Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

Rs.9359/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 5.1 (Description Grade 1 & 2)	-
Cl. No. 5.2 (Keeping quality- available chlorine( table no. 1, cl 5.3, Annex B), Grade 1 & 2)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 1, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 2, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 1, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 2, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 1, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 2, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 1, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 2, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 1, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 2, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 1, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 2, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 1, Annex G)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 2, Annex G)	-

-
-

IS 10904 (1984)

Specification for sodium fluoride, technical

Rs. 5,300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 , Table - 1 , i) (Sodium fluoride (as NaF), percent by mass, Min)	-
2.2 , Table - 1 , ii) (Silica as (Na2SiF4), precent by mass , Max)	-
2.2 , Table - 1 , iii) (Sulphaie (as Na2SO4), percent by mass, Max)	-
2.2 , Table - 1 , iv) (Carbonate (as Na2CO3), percent by mass, Max)	-
2.2 , Table - 1 , v) (Insoluble matter , percent by masss , Max)	-
3 (Packing and Marking)	-

-
-

IS 14364 (1996)

Quarternary ammonium compound based surface cleaner, liquid - Specification

Rs. 6,100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.3 (Odour)	-
4.2 (Composition)	-
4.4 (Colour)	-
4.5 (Stability)	-
4.6 (Cleaning Property)	-
4.7 (Applicability)	-
4.8 (Keeping Quality)	-
4.9, table 1(i) (Total non-volatile matter, % by mass, Min)	-
4.9, table 1(ii) (Ph)	-
4.9, table 1(iii) (QAC content, % by mass, Min)	-
5 (Packing)	-
6 (Marking)	-

-
-

IS 13498 (2017)

Bathing bar - Specification (Second Revision)

Rs. 7,100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1, Table-1, i) (Lather in ml, Min)	-
5.1, Table-1, ii) (Mush (loss in mass due to mushing), g/50 cm2 , Max)	-
5.1, Table-1, iii) (Free caustic alkali (as NaOH), percent by mass, Max)	-
5.1, Table-1, iv) (Free carbonated alkali, percent by mass, Max)	-
5.1, Table-1, v) (Freedom from grittiness)	-
5.1, Table-1, vi) (Freedom from cracking)	-
5.1, Table-1, vii) (Cleaning efficiency)	-
5.1, Table-1, viii), a) , i) (Total fatty matter, percent by mass, Min)	-
5.1, Table-1, viii), a) , ii) (Synthetic surface active agent, percent by mass, Min)	-
5.1, Table-1, viii), b) (Fatty matter from dissolved actives, Min)	-
6 (PACKAGING AND MARKING)	-

-
-

IS 1069 (2021)

QUALITY TOLERANCES FOR WATER FOR STORAGE BATTERIES - SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Descripiton)	-
Table 1 Requirements for Water for Storage Batteries (Clauses 3.2, 5.2 and 5.3) (pH)	-
Table 1 Requirements for Water for Storage Batteries (Clauses 3.2, 5.2 and 5.3) (Specific electrical conductivity at 25°C (microsiemens per cm), Max)	-

-
-

IS 6614 (2021)

SPECIFICATION FOR ALUMINIUM CHLORIDE ANHYDROUS TECHNICAL First revision of IS 6614

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.1.1 (For Powder)	-
3.1.2 (For Granule)	-
Cl-3.2,Table1,sl.no-i (Insoluble matter)	-
3.2, Table 1,(ii) (Assay as AlCl3 , percent by mass, Min)	-
Cl-3.2,Table 1,sl.no-iii (Total Aluminium as Al)	-
Cl-3.2,Table 1,sl.no-iv (Free Aluminium as Al)	-
Cl-3.2,Table 1,sl.no-v (Iron as Fe)	-
Cl-3.2,Table 1,sl.no-vi,a (Solubility -Ether)	-
Cl-3.2,Table 1,sl.no-vi,b (Solubility-Nitrobenzene)	-

-
-

IS 333 (2023)

POTASSIUM PERMANGANATE SPECIFICATION

Rs. 5480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2,Table-1,sl.no-i (Potassium permanganate (as KMnO4) content,)	-
Cl-4.2,Table-1,sl.no-ii (Insoluble matter)	-
Cl-4.2,Table-1,sl.no-iii ( Chlorides (as Cl))	-
Cl-4.2,Table-1,sl.no-iv (Sulphate (as SO4))	-
Cl-4.2,Table-1,sl.no-v (Nitrogen compounds (as N))	-
Cl-4.2,Table-1,sl.no-vi (Arsenic (as As2O3),)	-
Cl-4.2,Table-1,sl.no-vii (Loss on heating at 110 °C)	-

-
-

IS 3950 (1979)

surface boxes for sluice valves

Rs.450/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (MANUFACTURE AND WORKMANSHIP)	-
4 (CONSTRUCTION)	-
5 (DIMENSIONS AND TOLERANCES)	-
6 (MASS)	-
8 (PROTECTIVE COATING)	-

-
-

IS 16111 (2013)

Elastic bandage

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1,7.1.1 (Weight The weight of the elastic bandage shall be 25 to170 g/m2 .)	-
7.2 Annex A (Stretch Length and Extensibility : The extensibility of elastic bandage shall be 65 to 220 percent when tested as described in Annex A)	-
7.3 Annex B (Regain : The regain of the test bandage shall be not less than 70 percent when tested as described in Annex B)	-
5 (DIMENSIONS AND TOLERANCES)	-
5 a) Cl.9.2 (Width)	-
5 b) (Stretched Length)	-
8.2 (Finish)	-

-
-

IS 13593 (1992)

Upvc Pipe Fittings to be Used with the Upvc Pipes in the Suction and Delivery Lines Of Agricultural Pumps

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Mean outside diameter)	-
7.2 (Thickness)	-
7.3 (Depth of socket)	-
7.4 (Other dimensions)	-
8 (Workmanship)	-
9.1 (Vacuum test)	-
9.2 (Hydrostatic test)	-

-
-

IS 3327 (1982)

Specification for pedal - Operated paddy threshers (First Revision)

Rs. 7950/- excluding chemical tests. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No.5 (" CONSTRUCTIONAL REQ,UIREMENTS")	-
Cl. No.6 (DIMENSIONS)	-
Cl. No.7 ("OTHER REQUIREMENTS ")	-
Cl. No.8 (TESTS)	-
Cl. No.9 (WORKMANSHIP AND FINISH)	-
Cl. No.10 (marking)	-

-
-

IS 419 (1967)

Specification for putty, for use on window frames (First Revision)

- View breakup
For Initial Testing = Rs. (1500+36+150) = Rs. 1686 = Rs. 1690 Only Keeping Properties Testing = Rs. (675+18+50) = Rs. 743 = Rs. 750 Preparation of Test Report = Rs. 300

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Form and Condition)	-
3.3 (Consistency)	-
3.4, Table 1,(i) (Residue on sieve, percent by weight Max)	-
3.4, Table 1,(ii) (Water content, percent by weight, Max)	-
3.2 (Composition)	-

-
-

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (MANUFACTURE)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 7 (0)	-
8 (Marking)	-

-
-

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
6 (MANUFACTURE)	-
7 (FINISH)	-

-
-

IS 2548 : Part 2 (1996)

Plastic seats and covers for water - Closets - Specification: Part 2 thermoplastic seats and covers (Fifth Revision)

Rs. 5700/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Seats and cover)	-
4.2 (Hinging Device a) Bronze or Brass with Ni/Cr plating conforming to IS 1068,)	-
4.2 (b)Mild Steel with Ni/Cr plating conforming to IS 1068,)	-
4.2 (c)Al.Alloy with anodic coating conforming to IS 1868,)	-
4.2 (d)Suitable plastic. i) Water absorption on immersion for 24 hours should not exceed 0.6 percent by mass,)	-
4.2 (ii) Elongation should be 15 percent, Min, and)	-
4.2 (iii)The material should be capable of withstanding temperature up to 55°C without undergoing deformation or softening and becoming unsatisfactory in performance.)	-
5.1 (Shapes)	-
5.1.1.1 a) Seats: (ii) For recessed underside thickness,3 mm,Min ,)	-
5.1.1.1 a) Seats: (iii) Open / Closed front pattern .)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.1 a) Seats: (v) The seat shall be free from warpage)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.2 b) Covers: (i) Shall completely cover the aperture of seat,easy to raise from seat,easy to be connected to the seat by hinging device & shall not have any projection under- side the cover.)	-
5.1.2 b) Covers: (ii) The cover shall not be less than 3 mm in thickness at any point.)	-
5.1.2 b) Covers: (iii) The cover shall be free from warpage.)	-
5.2 Finish (i) The surfaces of the seats, covers and components shall be smooth, free from blisters and delamination and reasonably free from flowlines, contamination, streaking and unintended colour variation.)	-
5.2 Finish (ii) They shall be capable of being easily cleaned and shall not be adversely affected by household cleaners.)	-
5.2 Finish (iii) There shall be no sharp edges.)	-
5.2 Finish (iv) The mouldings shall be non-absorptive and free from cracks, crevices and internal voids.)	-
6.1 a (A)	-
6.1 b (B)	-
6.1 C (C)	-
6.1 d (D)	-
6.1 e (E)	-
6.1 f (F)	-
6.1 g (G)	-
6.1 h (Thickness of seat at thinnest point , 3)	-
Cl.6.2 Cover a) (Thickness of cover at thinnest point, 3)	-
6.1 j (10)	-
Hinging Device Cl 7 ((All dimensions are in mm))	-
Buffers & Distance pieces Cl.8 (Buffer) i) (No. of buffers,3 Min.)	-
8.1.1 ii) (Size of seat buffers ;)	-
8.1.1, i) (Shall have four radial ribs,moulded integrally supported by the top surface of the water-closet.supported by the top surface of the water-closet.)	-
8.1.1, ii) (Shall be not less than 45 mm in the radial direction.)	-
8.1.1, iii) (Width on plan 3 mm,Min.)	-
8.1.1, iv) (The distance between two adjacent ribs shall be not less than 100 mm.)	-
Cl 8.2.1 a) (Shall be fitted with the same number of buffers as provided for the seat.)	-
Cl 8.2.1 b) (The buffers below the seat & cover shall be placed vertically over each other.)	-
8.2.2 vi) (Alternatively the seat and cover may not be provided with buffers or distance pieces. In that case the design of seat shall be such that underside contact surface is flat and covers the whole rim of water-closet pan and is stable.)	-
Water absorption Cl 9.2 a) (1) Seat 0.75 % Max)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl.9.5 Staining by Seats & Covers (Shall not be any visible colour transfer to the white cloth.)	-
Cl.9.7 Surface Hardness (Rockwell hardness number a)Seat)	-
Cl .9.8 Endurance test for Seats,Covers and buffers (Shall not be dislocated & damaged.)	-

-
-

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Description)	-
5.3 Table-1 i (Available chlorine)	-
5.3 Table-1 ii (Stability, loss of Chlorine on the basis of initial available chlorine )	-
5.3 Table-1 iiii (Moisture, percent by mass. )	-
5.3 Table-1 iv (Particle size (Passing through 170 mm IS Sieve). Percent by mass)	-
5.3 - Table 1 - Sl No - iii (Moisture - Annex C)	-
Clause 5.4 (Keeping Quality )	-

-
-

IS 758 (1988)

Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

Rs 2400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1,Table 1,Sr.No.vii IS : 1390 (pH value)	-
3.1,Table 1,Sr.No.viii IS : 1383 (Scouring Loss)	-

-
-

IS 11217 (1984)

Specification for ultramarine blue for use in textile industry

Rs. 600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Composition)	-
2.2 (Identification)	-

-
-

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Rs.2144/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.2-5.2 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.2(a)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-
4.2.2(b)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-
4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-
4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-
4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
4.5-5.5 (Soft-filled toys-rate of spread of flame )	-
4.5-5.5 (Soft-filled toys-Test for soft-filled toys )	-

-
-

IS 3062 (1995)

Crop protection equipment - Rocker sprayer - Specification (Fourth Revision)

Rs. 4950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(F-6) (Workmanship and Finish)	-
Cl. 6.5 (Other requiremnt)	-
(F-4) (Other requiremnt)	-
(F-3) (Performance Requirement)	-
(F-3) (Performance Requirement)	-
(F-3) (Performance Requirement)	-
(Table 1 of IS 3652) (Material)	-
( F-11) (Type)	-
( F-11) (Marking)	-
( D - 4) (Other requirment)	-
( D - 3) (Dimensions)	-
(D-2 and Table 1 of IS3652) (Material)	-
(D-1) (Types)	-
(D-5) (Marking)	-
( C - 9 ) (ii) Leakage and Reliability test)	-
( C - 8 ) (Tests (C-7) i) Strength test)	-
( C - 6) (Operating Trigger/ Knob)	-
( C - 5 ) (Gaskets )	-
(C-4) (End Fittings i) Inlet ii) outlet)	-
( C - 2) (Dimensions)	-
Table 1 of IS 3652 ) (Material)	-
(C-10) (Types ( C-1 ))	-
(C-10) (Marking)	-
(Cl. 9.1) (MARKING)	-
(Cl.8) (Workmanship and Finish)	-
(Cl. 7) (Other requirements)	-
(Cl. 6.11) (Total Mass)	-
(Cl. 6.10) (Gaskets)	-
4.8.2 (c) test for hose connection)	-
4.8.2 (b) For cut- off device )	-
4.8.2 ( Hose Connections a) For delivery spout )	-
(Cl. 6.9 , 4.8.1 ) (Discharge Line, Delivery hose)	-
4.7.3 ( b) For Strainer Body)	-
4.7.3 ( Hose Connections a) For Suction spout)	-
4.7.2 ( Strainer Assembly a) stainer b) Stainer body)	-
(Cl. 6.8) & 4.7.1 (Suction Line, and suction hose)	-
4.6.2 ( Delivery Spout)	-
4.6.1 & 6.7 (Suction , delivery spout and suctionspout)	-
Cl. 6.5 (Pressure Chamber)	-
Cl. 6.5 (Pressure Chamber)	-
Cl. 6.5 (Pressure Chamber)	-
4.4.4 ( Piston Rod)	-
4.4.4 ( Piston Rod)	-
4.4.3 (Piston Spreaded)	-
4.4.2 ( Piston)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.2 (Frame)	-
Cl. 6.1 (Construction Requirment , base board)	-
Cl. 5.3 (Endurance Test)	-
Cl. 5.2 (Volumetric Efficiency)	-
5 & 5.1 (Performance requirement, Discharge rate)	-
4.8.2 (Cut-Off Device and , spray lance/ spray Gun)	-
4.8.2 (Nozzle)	-

-
-

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

- View breakup
Plugs & Portable Socket Outlets-2.5A (Only Plugs)-Non-rewiable-Rs.5300/-, Plugs with inslulating sleeves-Rs.5400/- 6A-Rewirable-Rs.5450/-, Non-rewirable-Rs.5500/-, Plugs with insulating sleeves-Rs.6850/-, 10A-Rewirable-Rs.5550/-, Non-rewirable-Rs.5600/-, Plugs with insulating sleeves-Rs.7000/-, 16A-Rewirable-Rs.5750/-, Non-rewiraable-Rs.5800/-, Plugs with insulating sleeves-Rs.7200/-. FIXED SOCKET OUTLETS-6A with screw terminals-5700/-, with screwless terminals-Rs.6650/-, 10A with screw terminals-Rs.5850/-, with screwless terminals-Rs.7250/-, 16A with screw terminals-Rs.6050/-, with screwless terminals-Rs.8100/-, 6/16A with screw terminals-Rs.7800/-, with screwless terminals-Rs.9850/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
29.0 (Resistance to Rusting)	-
28.2 (Resistance to Tracking)	-
28.1.1 (Glow-Wire Test )	-
27.3 (Creepage distances, clearances and distances through sealing compound )	-
27.2 (Creepage distances, clearances and distances through sealing compound )	-
27.1 (Creepage distances, clearances and distances through sealing compound )	-
26.7 (Screws, current carrying parts and connections)	-
26.2 (Screws, current carrying parts and connections)	-
26.1 (Screws, current carrying parts and connections)	-
25.4 (Resistance to heat)	-
25.3 (Resistance to heat)	-
25.2 (Resistance to heat)	-
25.1 (Resistance to heat)	-
25.1 (Resistance to heat)	-
24.14.2 (f)Verification of the Removal of Covers or Cover-Plates )	-
24.14.1 (e)Verification of the Non-removal of Covers or Cover-Plates )	-
24.8 (c) For shuttered socket-outlets )	-
24.6 (b) For screwed glands of accessories other than ordinary)	-
24.3 (a) For surface type socket outlet)	-
24.1 (a) Mechanical Strength )	-
22.2 (Verification of Minimum withdrawal force)	-
22.1 (Verification of Max withdrawal force)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
20.0 (Making & Breaking Capacity)	-
19.0 (Temperature Rise )	-
18.0 (Operation of Earthing Contacts)	-
17.2 ( Electric Strength)	-
17.1 (Insulation Resistance)	-
16.3 (Resistance to humidity)	-
16.2 (Resistance to Harmful Ingress of Water)	-
16.1 (Resistance to Ageing )	-
15.0 (Interlocked socket-outlets)	-
13.17 (Construction of fixed Socket Outlets)	-
13.16 (Construction of fixed Socket Outlets)	-
13.14 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
13.9 (Construction of fixed Socket Outlets)	-
13.5 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.3 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
12.2.11 (Terminals)	-
12.2.10 (Terminals)	-
12.2.9 (Terminals)	-
12.2.7 (Terminals)	-
12.2.5 (Terminals)	-
12.2.4 (Terminals)	-
12.2.3 (Terminals)	-
12.2.2 (Terminals)	-
12.2.1 (Terminals)	-
12.1 (Terminals)	-
11.5 (Provision for Earthing)	-
11.2 (Provision for Earthing)	-
11.1 (Provision for Earthing)	-
10.6 (Protection against Electric Shock)	-
10.5 (Protection against Electric Shock)	-
10.3 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
9.0 (16 A)	-
9.0 (16 A)	-
9.0 (16 A)	-
9.0 (6A/10A )	-
9.0 (6A/10A )	-
9.0 (6A/10A )	-
9.0 (Checking of dimensions)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
6.0 (Ratings)	-
6.0 (Ratings)	-
30.4 (Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-
30.3 (Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-
30.2 (Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-
30.1 (Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-
28.1.2 (Addiitional tests for plugs with pins provided with insulating sleeves)	-
24.18 (Verification of the Removal of Covers or Cover-Plates )	-
24.17 (Verification of the Removal of Covers or Cover-Plates )	-
24.16 (Verification of the Removal of Covers or Cover-Plates )	-
24.15 (Verification of the Removal of Covers or Cover-Plates )	-
24.13 (For portable socket outlets having means for suspension on a wall)	-
24.12 (For portable socket outlets having means for suspension on a wall)	-
24.11 (For portable socket outlets having means for suspension on a wall)	-
24.1 (For plugs)	-
24.9 (For portable multiple and combined socket outlets)	-
24.7 (For plug pins provided with insulating sleeves)	-
24.5 (For Portable single socket outlets/ plugs)	-
24.4 (For Portable socket outlets/ plugs)	-
24.2 (For Portable single socket outlets/ plugs)	-
23.4 (Flexible cables & their connection )	-
23.3 (Flexible cables & their connection )	-
23.2 (Flexible cables & their connection )	-
23.1 (Flexible cables & their connection )	-
14.15 (Construction of Plugs & Portables socket outlet )	-
14.11 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.8 (Construction of Plugs & Portables socket outlet )	-
14.7 (Construction of Plugs & Portables socket outlet )	-
14.3 (Construction of Plugs & Portables socket outlet )	-
14.2 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
12.1 (Terminals)	-
10.4 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
10.1 (Protection against Electric Shock)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
8 (Marking)	-

-
-

IS 10116 (2015)

Boric acid - Specification (First Revision)

- View breakup
Special Quality(SQ) Grade= Rs.4800/- Technical Grade(Tech) = Rs.2000/- Explosive Grade = Rs.2300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.6 (Boric Acid for Use in Explosives)	-
4.2 ( Description)	-

-
-

IS 1 (1968)

Specification for the national flag of India (Cotton khadi) (second revision)

Rs. 10890/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (FLAG)	-
4.3 a IS 1803 (Asoka Chakra)	-
4.3 b IS 1804 (Asoka Chakra)	-
4.3.1 Table 6 Fig. 4. (J)	-
4.3.1 Table 6 Fig. 4. (K)	-
4.3.1 Table 6 Fig. 4. (L)	-
4.3.1 Table 6 Fig. 4. (N)	-
3.5,3.5.1 (Wooden Toggles)	-
4,4.1 Table 5 Fig. 2 & 3 (A)	-
4,4.1 Table 5 Fig. 2 & 3 (B)	-
4,4.1 Table 5 Fig. 2 & 3 (C)	-
4,4.1 Table 5 Fig. 2 & 3 (D)	-
4,4.1 Table 5 Fig. 2 & 3 (E)	-
4,4.1 Table 5 Fig. 2 & 3 ( Dimension of Hemp Cordage and Loop L)	-
4,4.1 Table 5 Fig. 2 & 3 (M)	-
4,4.1 Table 5 Fig. 2 & 3 (N)	-
3.5.2 Table 5 Fig.1 (Wooden Toggle P)	-
5,5.1 a (Constructions)	-
5,5.1 b (The number of stitches shall not be less than 4 per cm)	-
5.2 (Depth of Lapped seam 10 mm ± 2 mm)	-
5.3 (Reinforcements -)	-
5.4 ( Sleeve)	-
5.5 (Hemp cordage)	-
5.5.1 (Brass wire- Flag of Size No 7 shall be provided with a Brass wire of 2.65 mm diameter.)	-
5.6 (Toggle)	-

-
-

IS 4752 (1994)

Sodium metabisulphite, food grade - Specification (First Revision)

Rs 5870/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Water insoluble matter)	-
3.4 Table 1 (Thiosulphate)	-
3.4 Table 1 (Arsenic)	-
3.4 Table 1 (Iron)	-
3.4 Table 1 (Heavy metals)	-
3.4 Table 1 (Selenium)	-
3.4 Table 1 (Purity, as SO2)	-
3.4 Table 1 (Purity, as Na2S2O5)	-
3.1 (Description)	-
3.2 (Identification test)	-
3.4 Table 1 (pH)	-

-
-

IS 5135 : Part 1 (1994)

Specification for hand - Rotary duster: Part 1 belly - Mounted type (Second Revision)

- View breakup
Testing charges for the product are Rs 7600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (Capacity)	-
7.1 (Volume flow rate)	-
7.2 (Dust delivery rate)	-
7.3 (Distance travelled by dust)	-
7.4 (Leakage)	-
8.0 (WORKMANSHIP AND FINISH)	-

-
-

IS 3906 (1995)

Crop Protection Equipment - Hand-operated Knapsack Sprayer, Piston Type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Marking)	-
5.1 & 5.2 (a) Discharge rate ml/minute Min. )	-
5.1 & 5.2 (b) Volumetric efficiency 85% Min.)	-
6.1 (i) Capacity Liters )	-
6.1 (ii)Thickness Min.)	-
6.1 (iii)The tank, when filled up to its neck level with water, shall not show any sign of leakage and shall not buckle)	-
6.2 (b)Skirt/Stand)	-
6.3 (c) Straps )	-
6.4 (d) Filling hole)	-
6.9 (i) Operating lever, handle and piston rod )	-
6.1 (j) Discharge outlet)	-
6.13 (m) cut off device and lance )	-
6.14 (n) Nozzle )	-
6.16 (p) Mass )	-
6.17 (q) Endurance)	-
Cl.8.1 and 8.2 (6. Workmanship & finish)	-
Cl.8.1 and 8.2 (Cut off device)	-

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Western Regional Laboratory (WRL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- wrol@bis.gov.in

Scope List