21.2 a)(Measurement of winding resistance ) |
- |
500 |
|
Test charges are for one Tap. Test charges for subsequent tap Rs. 400 |
21.2 b)( Measurement of voltage ratio and check of
phase displacemen) |
- |
650 |
|
Test charges are for one Tap. Test charges for subsequent tap Rs. 400 |
21.2 c)( Measurement of short-circuit impedance
(principal tapping, when applicable) and load
loss at 50 percent and 100 percent load) |
- |
3000 |
|
Test charges for subsequent tap Rs. 2200 |
21.2 d)(Measurement of no-load loss and current) |
- |
2100 |
|
Test charges for subsequent tap Rs. 1050 |
21.2 e)(Measurement of insulation resistance) |
- |
475 |
|
Test charges are for one Tap. Test charges for subsequent tap Rs. 475 |
21.2 f)(Induced over-voltage withstand test) |
- |
950 |
|
Test charges are for one Tap. Test charges for subsequent tap Rs. 950. |
21.2 g)( Separate-source voltage withstand test) |
- |
950 |
|
Test charges are for one Tap. Test charges for subsequent tap Rs. 950 |
21.5.3.3(Oil leakage test) |
- |
4250 |
|
- |
21.3(a )(Lightning impulse test) |
- |
30000 |
|
Charges given for above 250 KVA to 1000 KVA. so test charges vary by rating of transformer |
21.3(b)(Temperature-rise test) |
- |
15000 |
|
- |
21.4 c(No load current at 112.5 percent voltage.) |
- |
1400 |
|
Test charges are for one Tap. Test charges for subsequent tap Rs. 700 |
21.4 d(Paint adhesion tests) |
- |
1000 |
|
- |
7.8 (50%)(Total losses at 50 % load (Watts)) |
- |
1200 |
|
- |
7.8 (100%)(Total losses at 100 % load (Watts)) |
- |
1200 |
|
- |
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA
)) |
- |
5000 |
|
- |
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA
)) |
- |
5000 |
|
- |
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA) |
- |
5000 |
|
- |
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA) |
- |
5000 |
|
- |
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test)) |
- |
5000 |
|
- |
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test)) |
- |
5000 |
|
- |