1 |
IS 16169 (2019) |
Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision) |
-
|
450000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6(Test for single or multi-phase inverter) |
- |
450000 |
|
10% Discount to BIS |
Annex A(Islanding as it applies to PV systems) |
- |
0 |
|
10% Discount to BIS |
Annex B(Test for independent islanding device) |
- |
0 |
|
10% Discount to BIS |
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria) |
- |
0 |
|
10% Discount to BIS |
4(Testing circuit) |
- |
0 |
|
10% Discount to BIS |
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria) |
- |
0 |
|
Duplicate |
4(Testing circuit) |
- |
0 |
|
Duplicate |
|
Complete
|
|
17 Feb, 2025 |
- |
2 |
IS 16333 : Part 3 (2022) |
Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision) |
-
|
10000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1(Inputting of text) |
- |
4000 |
|
10% Rebate to BIS |
5.2(Message Readability) |
- |
4000 |
|
10% Rebate to BIS |
6(Marking) |
- |
2000 |
|
10% Rebate to BIS |
5.1(Inputting of text) |
- |
4000 |
|
10% Rebate to BIS
Test Repeated in LIMS |
5.2(Message Readability) |
- |
4000 |
|
10% Rebate to BIS
Test Repeated in LIMS |
6(Marking) |
- |
2000 |
|
10% Rebate to BIS
Test Repeated in LIMS |
|
Complete
|
|
17 Feb, 2025 |
- |
3 |
IS 16169 (2014) |
Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures |
-
|
450000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria) |
- |
450000 |
|
For inverter either clause 6 to 6.2 is applicable or Annex B. Therefore charges is provided for both the clauses. |
Annex B(Test for independent islanding device) |
- |
450000 |
|
For inverter either clause 6 to 6.2 is applicable or Annex B. Therefore charges is provided for both the clauses. |
|
Complete
|
|
17 Feb, 2025 |
- |
4 |
IS 16221 : Part 1 (2016) |
Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements |
-
|
630000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(General testing requirements) |
- |
15000 |
|
OK |
5(Marking and documentation) |
- |
15000 |
|
OK |
6(Environmental Requirements and conditions) |
- |
100000 |
|
OK |
7(Protection against electric shock and energy hazards) |
- |
50000 |
|
OK |
8(Protection Against mechanical Hazards) |
- |
50000 |
|
OK |
9(Protection Against Fire Hazards) |
- |
100000 |
|
OK |
11(Protection against liquid hazards) |
- |
100000 |
|
OK |
10(Protection against Sonic Pressure hazards) |
- |
50000 |
|
OK |
12(Chemical hazards) |
- |
0 |
|
OK |
13(Physical requirements) |
- |
50000 |
|
OK |
14(Components) |
- |
100000 |
|
OK |
|
Complete
|
|
17 Feb, 2025 |
- |
5 |
IS 16333 : Part 3 (2017) |
Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision) |
-
|
25000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5.1(Inputting of text) |
- |
3000 |
|
Nil |
5.2(Message Readability) |
- |
0 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
6 |
IS 302 : Part 1 (2008) |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
-
|
54000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
11.3(Heating) |
- |
2000 |
|
NIL |
29(clearance, creepage distances and solid insulation) |
- |
2000 |
|
NIL |
7(Marking and instructions) |
- |
1000 |
|
- |
8.1.1(Protection against live parts in all positions) |
- |
1000 |
|
- |
8.1.2(Protection against live parts in openings) |
- |
2000 |
|
- |
8.1.3(Protection against live parts in visible glowing heating elements) |
- |
2000 |
|
- |
8.1.4(Protection against live parts against protective impedance) |
- |
2000 |
|
- |
9(Starting of motor operation test requirements and tests) |
- |
0 |
|
- |
10.1(Power input) |
- |
1000 |
|
- |
10.2(Current input) |
- |
1000 |
|
- |
11.1(General) |
- |
0 |
|
- |
11.2(General) |
- |
0 |
|
- |
13.1(General) |
- |
0 |
|
- |
13.2(Leakage current at operating temperature) |
- |
2000 |
|
- |
13.3(Electric Strength at operating temperature) |
- |
2000 |
|
- |
14(Transient Over Voltages) |
- |
2000 |
|
- |
15.0(General) |
- |
0 |
|
- |
15.1(Ingress Protection test other than IPX0 (IP test)) |
- |
2000 |
|
- |
15.2(Spillage Test) |
- |
2000 |
|
- |
15.3(Humidity Test) |
- |
2000 |
|
- |
16.0(General) |
- |
0 |
|
- |
16.1(General) |
- |
0 |
|
- |
16.2(Leakage Current (after Clause 15)) |
- |
2000 |
|
- |
16.3(Electric Strength (after clause 15 and 16.2)) |
- |
2000 |
|
- |
17(Over Load Protection of Transformers and associated circuits) |
- |
2000 |
|
- |
18(Endurance Test requirements and tests) |
- |
2000 |
|
- |
19(Abnormal Operation) |
- |
2000 |
|
- |
20(Stability test) |
- |
2000 |
|
- |
21(Mechanical Strength Test) |
- |
2000 |
|
- |
22(Construction verification related test) |
- |
0 |
|
- |
23(General) |
- |
0 |
|
- |
24(Components) |
- |
0 |
|
- |
25(Supply connection and external flexible cords) |
- |
2000 |
|
- |
26(Terminals for external conductors) |
- |
2000 |
|
- |
27(Provision for earthing) |
- |
2000 |
|
- |
28(Screw test and connections) |
- |
2000 |
|
- |
30.1(Ball pressure test) |
- |
2000 |
|
- |
30.2(Glow Wire Test) |
- |
2000 |
|
- |
30.2(Needle Flame Test) |
- |
2000 |
|
- |
31(Resistance to Rusting) |
- |
0 |
|
- |
32(Radiation Toxicity and Similar Hazards) |
- |
0 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
7 |
IS 302 : Part 2 : Sec 6 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision) |
-
|
23000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.0(Classification) |
- |
0 |
|
OK |
7.0(Marking and instructions) |
- |
0 |
|
OK |
8.0(Protection against access to live part test) |
- |
4000 |
|
OK |
9.0(Starting of motor-operated appliances test) |
- |
0 |
|
OK |
10.0(Power Input and current test) |
- |
3000 |
|
OK |
11.0(Heating test) |
- |
3000 |
|
OK |
13.0(Leakage current and electric strength test) |
- |
2000 |
|
OK |
14.0(Transient voltages) |
- |
0 |
|
OK |
15.0(Moisture Resistance) |
- |
2000 |
|
OK |
16.0(Leakage current and electric strength test) |
- |
2000 |
|
OK |
17.0(Overload protection of transformers test) |
- |
0 |
|
OK |
18.0(Endurance test) |
- |
0 |
|
OK |
19.0(Abnormal Operations) |
- |
3000 |
|
OK |
20.0(Stability and Mechanical Hazards) |
- |
1000 |
|
OK |
21.0(Mechanical Strength) |
- |
0 |
|
OK |
22.0(Construction verification related tests) |
- |
0 |
|
OK |
23.0(Internal wiring) |
- |
0 |
|
OK |
24.0(Components) |
- |
0 |
|
OK |
25.0(Supply connections and External Flexible Cords) |
- |
0 |
|
OK |
26.0(Terminal for External Conductors) |
- |
0 |
|
OK |
27.0(Provision for Earthing) |
- |
1000 |
|
OK |
28.0(Screws and connections) |
- |
0 |
|
OK |
29.0(Clearances and Creepage distances and solid insulation) |
- |
1000 |
|
OK |
30.0(Resistance to heat and fire) |
- |
1000 |
|
OK |
31.0(Resistance to rusting) |
- |
0 |
|
OK |
32.0(Radiation, Toxicity and Similar hazards) |
- |
0 |
|
OK |
|
Complete
|
|
17 Feb, 2025 |
- |
8 |
IS 302 : Part 2 : Sec 15 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision) |
-
|
17500 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.0(Classification) |
- |
0 |
|
OK |
7(Marking and instructions) |
- |
0 |
|
OK |
8(Protection against live parts) |
- |
1500 |
|
OK |
9(STARTING OF MOTOR-OPERATED APPLIANCES) |
- |
0 |
|
OK |
10(POWER INPUT AND CURRENT) |
- |
2000 |
|
OK |
11(HEATING) |
- |
2000 |
|
OK |
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
1000 |
|
OK |
14(TRANSIENT OVERVOLTAGES) |
- |
0 |
|
OK |
15(MOISTURE RESISTANCE) |
- |
2000 |
|
OK |
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
1000 |
|
OK |
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
0 |
|
OK |
18(ENDURANCE) |
- |
0 |
|
OK |
19(ABNORMAL OPERATION) |
- |
2000 |
|
OK |
20(STABILITY AND MECHANICAL HAZARDS) |
- |
1000 |
|
OK |
21(MECHANICAL STRENGTH) |
- |
2000 |
|
OK |
22(CONSTRUCTION) |
- |
0 |
|
OK |
23(INTERNAL WIRING) |
- |
0 |
|
OK |
24(COMPONENTS) |
- |
0 |
|
OK |
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
0 |
|
OK |
26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
0 |
|
OK |
27(PROVISION FOR EARTHING) |
- |
1000 |
|
OK |
28(SCREWS AND CONNECTIONS) |
- |
0 |
|
OK |
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
1000 |
|
OK |
30(RESISTANCE TO HEAT AND FIRE) |
- |
1000 |
|
OK |
31(RESISTANCE TO RUSTING) |
- |
0 |
|
OK |
32(RADIATION, TOXICITY AND SIMILAR HAZARDS) |
- |
0 |
|
OK |
|
Complete
|
|
17 Feb, 2025 |
- |
9 |
IS 13252 : Part 1 (2010) |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
-
|
99000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
1.5(Components) |
- |
2500 |
|
- |
1.6(Power interface .) |
- |
2500 |
|
- |
1.7(Markings and instructions) |
- |
2500 |
|
- |
2.1(Protection from electric shock and energy hazards) |
- |
2500 |
|
- |
2.2(SELV circuits) |
- |
2500 |
|
- |
2.3(TNV circuits) |
- |
2500 |
|
- |
2.4(Limited current circuits) |
- |
2500 |
|
- |
2.5(Limited power sources .) |
- |
2500 |
|
- |
2.6(Provisions for earthing and bonding) |
- |
2500 |
|
- |
2.8(Safety interlocks) |
- |
2500 |
|
- |
2.9(Electrical insulation) |
- |
2500 |
|
- |
2.10(Clearances, creepage distances and distances through insulation) |
- |
2500 |
|
- |
3.1(General) |
- |
2500 |
|
- |
3.2(Connection to a mains supply) |
- |
2500 |
|
- |
3.3(Wiring terminals for connection of external conductors) |
- |
2500 |
|
- |
2.7(Overcurrent and earth fault protection in primary circuits) |
- |
2500 |
|
- |
3.4(Disconnection from the mains supply) |
- |
2500 |
|
- |
3.5(Interconnection of equipment) |
- |
2500 |
|
- |
4.1(Stability) |
- |
2500 |
|
- |
4.2(Mechanical strength) |
- |
2500 |
|
- |
4.3(Design and construction) |
- |
2500 |
|
- |
4.4(Protection against hazardous moving parts) |
- |
2500 |
|
- |
4.5(Thermal requirements) |
- |
2500 |
|
- |
4.6(Openings in enclosures) |
- |
2500 |
|
- |
4.7(Resistance to fire) |
- |
2500 |
|
- |
5.1(Touch current and protective conductor curren) |
- |
2500 |
|
- |
5.3(Abnormal operating and fault conditions) |
- |
2500 |
|
- |
5.2(Electric strength) |
- |
2500 |
|
- |
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment) |
- |
2500 |
|
- |
6.2(Protection of equipment users from overvoltages on networks telecommunication) |
- |
2500 |
|
- |
6.3(Protection of the telecommunication wiring system from overheating) |
- |
2500 |
|
- |
7.1(General) |
- |
6000 |
|
- |
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment) |
- |
6000 |
|
- |
7.3(Protection of equipment users from overvoltages on the cable distribution system) |
- |
6000 |
|
- |
7.4(Insulation between primary circuits and cable distribution systems) |
- |
6000 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
10 |
IS 15885 : Part 2 : Sec 13 (2012) |
Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules |
-
|
52000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
7(Marking) |
- |
4000 |
|
- |
8(Protection against accidental contact with live parts) |
- |
4000 |
|
- |
9(Terminals) |
- |
0 |
|
- |
10(PROVISION FOR EARTHING) |
- |
4000 |
|
- |
11(MOISTURE RESISTANCE) |
- |
4000 |
|
- |
12(Electric Strength) |
- |
4000 |
|
- |
13(Thermal endurance test for winding of ballasts) |
- |
4000 |
|
- |
14(Fault conditions) |
- |
4000 |
|
- |
15(Transformer heating) |
- |
4000 |
|
- |
16(Construction) |
- |
4000 |
|
- |
17(Creepage distance and clearances) |
- |
4000 |
|
- |
18(Screws, current carrying parts and connections) |
- |
4000 |
|
- |
19(Resistance to heat, fire and tracking) |
- |
4000 |
|
- |
20(Resistance to corrosion) |
- |
4000 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
11 |
IS 302 : Part 2 : Sec 25 (2014) |
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens |
-
|
125000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
8(Protection against live parts) |
- |
4500 |
|
Nil |
6.0(Classification) |
- |
4500 |
|
OK |
7(Marking and instructions) |
- |
4500 |
|
OK |
9(STARTING OF MOTOR-OPERATED APPLIANCES) |
- |
4500 |
|
OK |
10(POWER INPUT AND CURRENT) |
- |
12500 |
|
OK |
11(HEATING) |
- |
4500 |
|
OK |
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
4500 |
|
OK |
14(IMPULSE VOLTAGE TEST) |
- |
4500 |
|
OK |
15(HUMIDITY TREATMENT TEST) |
- |
4500 |
|
OK |
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
4500 |
|
OK |
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
4500 |
|
OK |
24(COMPONENTS) |
- |
4500 |
|
OK |
18(ENDURANCE) |
- |
4500 |
|
OK |
19(ABNORMAL OPERATION) |
- |
4500 |
|
OK |
20(STABILITY AND MECHANICAL HAZARDS) |
- |
4500 |
|
OK |
21(MECHANICAL STRENGTH) |
- |
4500 |
|
OK |
23(INTERNAL WIRING) |
- |
4500 |
|
OK |
22(CONSTRUCTION) |
- |
4500 |
|
OK |
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
4500 |
|
OK |
26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
4500 |
|
OK |
27(PROVISION FOR EARTHING) |
- |
4500 |
|
OK |
28(SCREWS AND CONNECTIONS) |
- |
4500 |
|
OK |
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
4500 |
|
OK |
30(RESISTANCE TO HEAT AND FIRE) |
- |
4500 |
|
OK |
31(RESISTANCE TO RUSTING) |
- |
4500 |
|
OK |
32(RADIATION, TOXICITY AND SIMILAR HAZARDS) |
- |
4500 |
|
OK |
|
Complete
|
|
17 Feb, 2025 |
- |
12 |
IS 302 : Part 2 : Sec 26 (2014) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision) |
-
|
105000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
6.0(Classification) |
- |
4000 |
|
NIL |
7(Marking and instructions) |
- |
4000 |
|
NIL |
8(Protection against live parts) |
- |
4000 |
|
NIL |
9(STARTING OF MOTOR-OPERATED APPLIANCES) |
- |
4000 |
|
NIL |
10(POWER INPUT AND CURRENT) |
- |
17000 |
|
NIL |
11(HEATING) |
- |
4000 |
|
NIL |
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
4000 |
|
NIL |
14(TRANSIENT OVERVOLTAGES) |
- |
4000 |
|
NIL |
15(MOISTURE RESISTANCE) |
- |
4000 |
|
NIL |
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
4000 |
|
NIL |
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
4000 |
|
NIL |
18(ENDURANCE) |
- |
4000 |
|
NIL |
19(ABNORMAL OPERATION) |
- |
4000 |
|
NIL |
20(STABILITY AND MECHANICAL HAZARDS) |
- |
4000 |
|
NIL |
21(MECHANICAL STRENGTH) |
- |
4000 |
|
NIL |
22(CONSTRUCTION) |
- |
4000 |
|
NIL |
23(INTERNAL WIRING) |
- |
4000 |
|
NIL |
24(COMPONENTS) |
- |
4000 |
|
NIL |
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
4000 |
|
NIL |
26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
4000 |
|
NIL |
27(PROVISION FOR EARTHING) |
- |
4000 |
|
NIL |
28(SCREWS AND CONNECTIONS) |
- |
4000 |
|
NIL |
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
4000 |
|
NIL |
30(RESISTANCE TO HEAT AND FIRE) |
- |
4000 |
|
NIL |
31(RESISTANCE TO RUSTING) |
- |
0 |
|
NIL |
32(RADIATION, TOXICITY AND SIMILAR HAZARDS) |
- |
0 |
|
NIL |
|
Complete
|
|
17 Feb, 2025 |
- |
13 |
IS 16242 : Part 1 (2014) |
Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS |
-
|
102000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4.5(Components) |
- |
4250 |
|
- |
4.6(Power interface) |
- |
4250 |
|
- |
4.7(Marking & instructions) |
- |
4250 |
|
- |
5.1(Protection against shock and energy hazards) |
- |
4250 |
|
- |
5.2(Requirement of auxiliary circuits) |
- |
4250 |
|
- |
5.3(Protective earthing and bonding) |
- |
4250 |
|
- |
5.4(AC and DC power isolation) |
- |
4250 |
|
- |
5.5(Over current and earth fault condition) |
- |
4250 |
|
- |
5.6(Safety interlocks) |
- |
4250 |
|
- |
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
4250 |
|
- |
6.1(Wiring, connections and supply) |
- |
4250 |
|
- |
6.2(Connection to power) |
- |
4250 |
|
- |
6.3(Wiring terminals for external power conductors) |
- |
4250 |
|
- |
7.1(Enclosure) |
- |
4250 |
|
- |
7.2(STABILITY) |
- |
4250 |
|
- |
7.3(MECHANICAL STRENGTH) |
- |
4250 |
|
- |
7.4(Construction details) |
- |
4250 |
|
- |
7.5(Resistance to fire) |
- |
4250 |
|
- |
7.6(Battery location) |
- |
4250 |
|
- |
7.7(Temperature rise) |
- |
4250 |
|
- |
8.1(General procision for earth leakage) |
- |
4250 |
|
- |
8.2(Electric Strength) |
- |
4250 |
|
- |
8.3(Abnormal operating and fault conditions) |
- |
4250 |
|
- |
9.0(Connection to telecommunication networks) |
- |
4250 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
14 |
IS 16221 : Part 2 (2015) |
Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters |
-
|
220000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(General Test Requireements) |
- |
20000 |
|
NIL |
5(Marking and documentation) |
- |
20000 |
|
NIL |
6(Environmental requirements and conditions) |
- |
20000 |
|
NIL |
7(Protection against electric shock and energy hazards) |
- |
20000 |
|
NIL |
8(Protection against Mechanical Hazards) |
- |
20000 |
|
NIL |
9(Protection against Fire Hazards) |
- |
20000 |
|
NIL |
10(Protection against Sonic Pressure Hazards) |
- |
20000 |
|
NIL |
11(Protection against Liquid Hazards) |
- |
20000 |
|
NIL |
12(Protection against Chemical Hazards) |
- |
20000 |
|
NIL |
13(Physical Requirements) |
- |
20000 |
|
NIL |
14(Components) |
- |
20000 |
|
NIL |
|
Complete
|
|
17 Feb, 2025 |
- |
15 |
IS 616 (2017) |
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) |
-
|
79000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
5(Marking and instructions) |
- |
5000 |
|
- |
7(Heating under normal operating conditions) |
- |
13000 |
|
- |
8(Constructional requirements with regard to the protection against electric shock) |
- |
5000 |
|
- |
9(Electric shock hazard under normal operating conditions) |
- |
7000 |
|
- |
10(Insulation requirements) |
- |
5000 |
|
- |
11(Fault conditions) |
- |
5000 |
|
- |
12(Mechanical strength) |
- |
5000 |
|
- |
13(CLEARANCES and CREEPAGE DISTANCES) |
- |
5000 |
|
- |
14(Components) |
- |
6000 |
|
- |
15(TERMINALS) |
- |
5000 |
|
- |
16(External flexible cords) |
- |
6000 |
|
- |
17(Electrical connections and mechanical fixings) |
- |
4000 |
|
- |
18(Mechanical strength of picture tubes and protection against the effects of implosion) |
- |
0 |
|
- |
19(Stability and mechanical hazards) |
- |
4000 |
|
- |
20(Resistance to fire) |
- |
0 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
16 |
IS 16046 : Part 1 (2018) |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision ) |
-
|
88000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Parameter Measurement Tolerances) |
- |
0 |
|
- |
5.2(Insulation and Wiring) |
- |
1000 |
|
- |
5.1(General) |
- |
0 |
|
- |
5.3(Venting) |
- |
0 |
|
- |
5.4(Temperature, Voltage and Current Management) |
- |
0 |
|
- |
5.5(Terminal Contacts) |
- |
0 |
|
- |
5.6(Assembly of Cells into batteries) |
- |
0 |
|
- |
5.7(Quality Plan) |
- |
0 |
|
- |
6(Tyoe Test amd Sample Size) |
- |
0 |
|
- |
7(Specific requirements and tests) |
- |
0 |
|
- |
7.1(Charging procedure for test purposes) |
- |
2000 |
|
- |
7.2(Intended Use) |
- |
35000 |
|
- |
7.3(Reasonably foreseeable misuse) |
- |
48000 |
|
- |
8.1(General) |
- |
0 |
|
- |
8.2(Small Cell and battery safety information) |
- |
0 |
|
- |
9(Marking) |
- |
0 |
|
- |
9.1(Cell Marking) |
- |
1000 |
|
- |
9.2(Battery Marking) |
- |
1000 |
|
- |
9.3(Caution for ingestion of small cells and batteries) |
- |
0 |
|
- |
9.4(Other information) |
- |
0 |
|
- |
10(Packaging) |
- |
0 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |
17 |
IS 16046 : Part 2 (2018) |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision ) |
-
|
93000 View breakup
-
Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
4(Parameter Measurement Tolerances) |
- |
0 |
|
- |
5(General Safety Considerations) |
- |
0 |
|
- |
5.1(General) |
- |
0 |
|
- |
5.2(Insulation and Wiring) |
- |
5000 |
|
- |
5.3(Venting) |
- |
0 |
|
- |
5.4(Temperature, Voltage and Current Management) |
- |
0 |
|
- |
5.5(Terminal Contacts) |
- |
0 |
|
- |
5.6(Assembly of Cells into batteries) |
- |
0 |
|
- |
5.7(Quality Plan) |
- |
0 |
|
- |
5.8(Battery Safety Components) |
- |
0 |
|
- |
6(Tyoe Test amd Sample Size) |
- |
0 |
|
- |
7(Specific requirements and tests) |
- |
0 |
|
- |
7.1(Charging procedure for test purposes) |
- |
10000 |
|
- |
7.2(Intended Use) |
- |
25000 |
|
- |
7.3(Reasonably foreseeable misuse) |
- |
53000 |
|
- |
8(Information for safety) |
- |
0 |
|
- |
8.2(Small Cell and battery safety information) |
- |
0 |
|
- |
9(Marking) |
- |
0 |
|
- |
9.1(Cell Marking) |
- |
0 |
|
- |
9.2(Battery Marking) |
- |
0 |
|
- |
9.3(Caution for ingestion of small cells and batteries) |
- |
0 |
|
- |
9.4(Other information) |
- |
0 |
|
- |
10(Packaging) |
- |
0 |
|
- |
8.1(General) |
- |
0 |
|
- |
|
Complete
|
|
17 Feb, 2025 |
- |