BIS - LIMS (Laboratory Information Management System)

Testing Electrical Standards Laboratory And R&D Institute Pvt Ltd

B1+B2+B3/24, GIDC Electronics Estate, GANDHINAGAR, Gandhinagar, Gujarat, 382025

- akj@teslacentre.co.in

Scope List

Reset

5 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 5600 (2002)

Pumps - Sewage and drainage - Specification (First Revision)

upto 75 kW

- View breakup
Upto and including 3.7 kW : Rs. 6,312/-, >3.7 kW to 7.5 kW : Rs. 6,972/-, >7.5 kW to 11 kW : Rs. 7,620/- , >11kW to 19kW : Rs. 8,712/-, >19kW to 22 kW : Rs. 10,896/-, > 22 kW to 29.5 kW : Rs. 11,976/-, >29.5 kW to 33 kW : Rs. 13,068/-, >33 kW to 45 kW : Rs. 14,160/-, >45 kW to 55 kW : Rs. 21,000/-, >55 kW to 65 kW : Rs. 25,500/-, >65 kW to 75 kW : Rs. 30,000/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

upto 45 kW

35263 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.2(Rating)	-	1500	-
18.3(BIS Certification Marking )	-	1500	-
15.3.2(Marking)	-	1500	-
8.0(Earthing)	-	1500	-
9.0(Terminal Marking)	-	1500	-
11.0(DUTY AND RATING)	-	1500	-
18.3(Marking)	-	1500	-
16.2.1(Dimensions)	-	1500	-
16.1.1(Insulation Resistance Test)	-	1500	-
16.1.2(Measurement of Resistance of Windings of Stator)	-	1500	-
16.1.3(No Load Test)	-	1500	-
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	1500	-
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	1500	-
16.1.6(High Voltage Test)	-	1500	-
16.2.2(Locked Rotor Test)	-	1500	-
16.2.2.1(Locked Rotor Test)	-	1500	-
16.2.2.2(Locked Rotor Test)	-	1500	-
16.2.2.2.1(Locked Rotor Test)	-	1500	-
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	1500	-
16.2.2.3.1(Direct proportion method)	-	1500	-
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1500	-
16.2.4(Temperature Rise Test)	-	2263	-
16.2.5(Momentary Overload Test)	-	1500	-
16.3.1( Test for Vibration Severity of Motor)	-	5000	-
16.3.3( Test for Degree of Protection by Enclosure)	-	10500	-
16.3.4(Over Speed Test)	-	5000	-
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	14763	-
15.2(Rating)	-	1500	-
18.3(BIS Certification Marking )	-	1500	-
15.3.2(Marking)	-	1500	-
8.0(Earthing)	-	1500	-
9.0(Terminal Marking)	-	1500	-
11.0(DUTY AND RATING)	-	1500	-
18.3(Marking)	-	1500	-
16.1.1(Insulation Resistance Test)	-	1500	-
16.1.2(Measurement of Resistance of Windings of Stator)	-	1500	-
16.1.3(No Load Test)	-	1500	-
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	1500	-
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	1500	-
16.1.6(High Voltage Test)	-	1500	-
16.2.2(Locked Rotor Test)	-	1500	-
16.2.2.1(Locked Rotor Test)	-	1500	-
16.2.2.2(Locked Rotor Test)	-	1500	-
16.2.2.2.1(Locked Rotor Test)	-	1500	-
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	1500	-
16.2.2.3.1(Direct proportion method)	-	1500	-
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1500	-
16.2.4(Temperature Rise Test)	-	2263	-
16.2.5(Momentary Overload Test)	-	1500	-
16.3.1( Test for Vibration Severity of Motor)	-	5000	-
16.3.3( Test for Degree of Protection by Enclosure)	-	10500	-
16.3.4(Over Speed Test)	-	5000	-
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	14763	-

Complete

31 Dec, 2023

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

up to 45 kW

15840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	220	-
8.1.1(Design Features)	-	220	-
8.1.4(Design Features)	-	220	-
8.1.5(Design Features)	-	220	-
8.1.5(Design Features)	-	220	-
8.1.7(Design Features)	-	220	-
9(Efficiency)	-	220	-
10(Performance (Cl 17.1 of IS 5120))	-	220	-
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	220	-
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	220	-
10(Fluid Passages (Cl 17.3 of IS 5120))	-	220	-
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	220	-
10(Lantern Ring (Cl 17.5 of IS 5120))	-	220	-
10(Casing (Cl 17.6 of IS 5120))	-	220	-
10(Impeller (Cl 17.7 of IS 5120))	-	220	-
10(Shaft (Cl 17.8 of IS 5120))	-	220	-
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	220	-
10(Bearings (Cl 17.10 of IS 5120))	-	220	-
10(Bearings (Cl 17.10.1 of IS 5120))	-	220	-
10(Bearings (Cl 17.10.2 of IS 5120))	-	220	-
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	220	-
10(Base Plates (Cl 17.12 of IS 5120))	-	220	-
10(Prime Mover (Cl 17.13 of IS 5120))	-	220	-
10(Name Plate (Cl 17.14 of IS 5120))	-	220	-
10(Name Plate (Cl 17.14 of IS 5120))	-	220	-
10(Name Plate (Cl 17.14 of IS 5120))	-	220	-
10(Name Plate (Cl 17.14.1 of IS 5120))	-	220	-
10.2(Casing)	-	220	-
10.3(Impeller)	-	220	-
10.4.1(Shaft)	-	220	-
10.4.2(Shaft)	-	220	-
10.5.1(Balancing)	-	220	-
10.5.2(Balancing)	-	220	-
10.5.3(Balancing)	-	220	-
10.5.4(Balancing)	-	220	-
10.6.1( Provision for Earthing)	-	220	-
10.6.2( Provision for Earthing)	-	220	-
10.6.3( Provision for Earthing)	-	220	-
10.6.4( Provision for Earthing)	-	220	-
10.7.1(Terminal Marking and Direction of Rotation)	-	220	-
10.7.2(Terminal Marking and Direction of Rotation)	-	220	-
10.7.3(Terminal Marking and Direction of Rotation)	-	220	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	330	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	330	-
15.5(Hydrostatic Pressure Test)	-	220	-
16.1.1( Guarantee of Performance)	-	220	-
16.1.3( Guarantee of Performance)	-	220	-
16.1.4( Guarantee of Performance)	-	220	-
16.1.5( Guarantee of Performance)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1(Marking)	-	220	-
18.1.3(Marking)	-	220	-

Complete

31 Dec, 2023

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

15840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Construction, IS 9283)	-	360	-
5.1.1(Construction, IS 9283)	-	360	-
5.1.2(Construction, IS 9283)	-	360	-
5.1.3(Construction, IS 9283)	-	360	-
5.1.4(Construction, IS 9283)	-	360	-
5.2.1(Earthing, IS 9283)	-	360	-
5.2.2(Earthing, IS 9283)	-	360	-
5.2.3(Earthing, IS 9283)	-	360	-
5.2.4(Earthing, IS 9283)	-	360	-
5.2.5(Earthing, IS 9283)	-	360	-
5.3(Foreign Matter, IS 9283)	-	360	-
5.5(Finish of Bearings, IS 9283)	-	360	-
5.6(Balancing of Rotor, IS 9283)	-	360	-
7.1(Dimensions of Motors, IS 9283)	-	360	-
7.2.1(Tolerances, IS 9283)	-	360	-
7.2.2(Tolerances, IS 9283)	-	360	-
8(Type of duty, IS 9283)	-	360	-
13(Terminal Markings, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
23(Leakage Current test, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.1(Marking, IS 9283)	-	360	-
15.3(Marking, IS 9283)	-	360	-
17.1(Performance values, IS 9283)	-	360	-
17.1(Performance values, IS 9283)	-	360	-
17.1(Performance values, IS 9283)	-	360	-
17.1(Performance values, IS 9283)	-	360	-
18.1(Overload test, IS 9283)	-	360	-
19(Temperature rise test, IS 9283)	-	540	-
19(Temperature rise test, IS 9283)	-	540	-
20(High Voltage test, IS 9283)	-	360	-
21(Insulation Resistance test, IS 9283)	-	360	-
22(Speed, IS 9283)	-	360	-

Complete

31 Dec, 2023

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

0.37 kW to 75 kW

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14(Marking)	-	400	NA
6.1 (a)(Constructional Features)	-	400	NA
6.1 (b)(Constructional Features)	-	400	NA
6.1 (c)(Constructional Features)	-	400	NA
6.1 (d)(Constructional Features)	-	400	NA
6.1 (e)(Constructional Features)	-	400	NA
6.1 (f)(Constructional Features)	-	400	NA
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	400	NA
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	400	NA
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	400	NA
6.2 (d)(Material of construction Part Sub Assembly Discharge casing (if provided))	-	400	NA
6.2 (e)(Material of construction Part Sub Assembly Impeller)	-	400	NA
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	400	NA
6.2 (g)(Material of construction Part Sub Assembly Pump Shaft)	-	400	NA
6.2 (h)(Material of construction Part Sub Assembly Suction Casing)	-	400	NA
6.2.2.1(Gaskets, Seals and Packings)	-	400	NA
6.2.2.2(Gaskets, Seals and Packings)	-	400	NA
6.2.3(Gaskets, Seals and Packings)	-	400	NA
6.2.4(Gaskets, Seals and Packings)	-	400	NA
6.2.5(Gaskets, Seals and Packings)	-	400	NA
7.1.1(Design features: Typical design features 0f components of pump)	-	400	NA
7.1.2(Design features: Typical design features 0f components of pump)	-	400	NA
7.1.3(Design features: Typical design features 0f components of pump)	-	400	NA
7.1.4(Design features: Typical design features 0f components of pump)	-	400	NA
7.1.5(Design features: Typical design features 0f components of pump)	-	400	NA
7.1.6(Design features: Typical design features 0f components of pump)	-	400	NA
8.1(General Requirements)	-	400	NA
8.2(Casing)	-	400	NA
8.3(Impeller)	-	400	NA
8.4.1(Shaft)	-	400	NA
8.4.2(Shaft)	-	400	NA
8.5.1(Balancing)	-	400	NA
8.5.2(Balancing)	-	400	NA
8.7.1(Direction of Rotation)	-	400	NA
8.7.2(Direction of Rotation)	-	400	NA
8.8(Terminal Marking)	-	400	NA
8.9.1(Typical Installation)	-	400	NA
8.9.3(Typical Installation)	-	400	NA
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	400	NA
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	400	NA
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	400	NA
10.3(Hydrostatic Pressure Test)	-	400	NA
11.1.1(Guarantee of Performance)	-	400	NA
11.1.2(Guarantee of Performance)	-	400	NA
11.1.2(Guarantee of Performance)	-	400	NA
11.1.3(Guarantee of Performance)	-	400	NA
11.1.4(Guarantee of Performance)	-	400	NA
11.1.5(Guarantee of Performance)	-	400	NA
12(Guarantee of workmanship and material)	-	400	NA
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
14(Marking)	-	400	-
8.9(Typical installation)	-	400	-
8.5(Balancing of rotor)	-	400	-
8.6(Submersible cable)	-	400	-
8.7(Direction of Rotation)	-	400	-
7(Design features)	-	400	-
7.1.10(Voltage & Frequency variation)	-	400	-
6(Measurement of shaft extension)	-	400	-
6(Constructional Features)	-	400	-
11(Guarantee of Performance)	-	400	-
10(Pump Performance test)	-	400	-
9.1(General)	-	400	-
9.10 (a)(Insulation Resistance test)	-	400	-
9.10 (b)(High Voltage test)	-	400	-
9.10 (c)(Measurement of Stator Resistance)	-	400	-
9.10 (d)(No Load Test at Rated Voltage)	-	400	-
9.10 (e)(Reduced voltage Running up test)	-	400	-
9.10 (f) & (g)(Locked Rotor Test)	-	400	-
9.10 (h)(Leakage current test)	-	400	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	500	-
9.10 (k)(Temperature rise test at reduced voltage)	-	500	-

Complete

31 Dec, 2023

Bureau of Indian Standards

The National Standards Body of India

Testing Electrical Standards Laboratory And R&D Institute Pvt Ltd

B1+B2+B3/24, GIDC Electronics Estate, GANDHINAGAR, Gandhinagar, Gujarat, 382025

- akj@teslacentre.co.in

Scope List

No Record Found