BIS - LIMS (Laboratory Information Management System)

CIPET, Lucknow

B-27 Amausi Industrial Area Nadarganj Lucknow, Luknow, Lucknow, Uttar Pradesh, 226008

7052009477 cipetlko2@gmail.com

Scope List

Reset

63 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

34505 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	500	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	500	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	500	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	500	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	500	-
5.3(Lamination)	-	1050	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	1100	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
6.4(UV Resistance Test)	-	10180	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1100	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 5.4(Sack Fabrication)	-	500	-
Clause 7.3(Marking on Sacks)	-	500	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 7.3(Marking on Sacks)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1050	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	1100	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
5.3(Lamination)	-	1050	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	1100	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
6.4(UV Resistance Test)	-	10180	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1200	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	500	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	500	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 5.4(Sack Fabrication)	-	500	-
Clause 7.3(Marking on Sacks)	-	500	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 7.3(Marking on Sacks)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

18088 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	2000	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	500	-
5.4(Lamination for PP)	-	2000	-
5.4(Lamination for LDPE)	-	2000	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1600	1100+ 500 (Specimen)
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1100	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1100	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	500	-
5.4(Lamination for PP)	-	500	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1100	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	700	-
5.4(Lamination for PP)	-	1050	-
5.4(Lamination for LDPE)	-	1050	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	700	-
5.4(Lamination for PP)	-	500	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-

31 Dec, 2026

-
Included w.e.f 19.07.2024

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

46880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	500	-
5.2.1(Fabric)	-	500	-
5.2.2(Linear density of tapes)	-	500	-
5.2.4(Unlaminated fabric mass)	-	500	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	500	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	500	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	500	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500	-
5.4.1(Sack)	-	500	-
5.4.1.1(Centre seam)	-	500	-
5.4.1.2(Bottom seam)	-	500	-
5.4.2(Sack)	-	500	-
5.4.3(Sack)	-	500	-
5.4.5(Liner)	-	500	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	500	-
6.1.1, Table 1(Gusset width)	-	500	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	500	-
6.1.1, Table 1(Mass of laminated fabric)	-	500	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1100	-
6.2, Table 1(Breaking strength of bottom seam)	-	1100	-
6.2, Table 1(Breaking strength of centre seam)	-	1100	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	1100	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	1100	-
6.4(Drop Impact Testing of Filled Sacks)	-	1100	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	500	-
Clause 6.2.2(Stitch strength)	-	500	-
Clause 6.2.2(Weld seam strength)	-	1100	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	1100	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

Bureau of Indian Standards

The National Standards Body of India

CIPET, Lucknow

B-27 Amausi Industrial Area Nadarganj Lucknow, Luknow, Lucknow, Uttar Pradesh, 226008

7052009477 cipetlko2@gmail.com

Scope List