BIS - LIMS (Laboratory Information Management System)

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

D-115 A, Hosiery Complex, Phase-II, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 alplgreaternoida@gmail.com

Scope List

Reset

95 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	10% Discount for BIS
4.2 and Table 1 ii(Dimensions )	-	300	10% Discount for BIS
5.2 and Table 1 iii(Ends per dm )	-	400	10% Discount for BIS
5.2 and Table 1 iv(Picks per dm )	-	400	10% Discount for BIS
4.2 and Table 1 v(Mass of sack )	-	300	10% Discount for BIS
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1500	10% Discount for BIS
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1500	10% Discount for BIS
4.2 and Table 1 viii(Elongation at break of fabric )	-	1500	10% Discount for BIS
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10000	10% Discount for BIS
4.2 and Table 1 x(Ash content )	-	500	10% Discount for BIS

21 Jul, 2028

-
0.0

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

47080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	100	-
5.3(Height)	-	200	-
5.4.2(Ergonomic feature)	-	300	-
5.4.3(Sole bond)	-	600	-
5.4.4(Slip resistance)	-	1000	-
5.4.5(Leak proofness)	-	480	-
5.4.6.1(Toe caps General)	-	200	-
5.4.6.2(Internal length of toecaps)	-	200	-
5.4.6.3(Corrosion resistance)	-	500	-
5.4.6.4(Impact resistance)	-	600	-
5.4.6.5(Compression resistance)	-	600	-
5.4.7(Colour)	-	200	-
5.4.8.1(Conductive Footwear)	-	2500	-
5.4.8.2(Antistatic Footwear)	-	2500	-
5.4.8.3.2(Penetration resistance)	-	1000	-
5.4.8.4(Cut resistance)	-	2500	-
5.4.8.5(Outsole resistance to acid and alkali)	-	1000	-
5.4.8.6(Outsole resistance to fuel oil)	-	1000	-
5.5.1(Upper material)	-	125	-
5.5.1(Upper Thickness)	-	125	-
5.5.2(Upper tensile strength)	-	600	-
5.5.3(Upper flexing)	-	600	-
5.5.4(Upper Hardness)	-	800	-
5.5.5(Upper Cold flex resistance)	-	1000	-
5.6.1(Lining material)	-	150	-
5.6.2(Lining Tear strength)	-	600	-
5.6.3(Lining abrasion)	-	840	-
5.6.4(Lining adhesion with upper)	-	840	-
5.7.1(Insole material)	-	250	-
5.7.2(Insole abrasion)	-	840	-
5.7.3(Water absorption and desorption)	-	600	-
5.8.2(Eyelets material)	-	150	-
5.8.2(Lace material)	-	200	-
5.8.2(Lace length)	-	200	-
5.8.2(Lace breaking load)	-	200	-
5.9.1(Insock material)	-	150	-
5.9.2(Inscok abrasion resistance)	-	840	-
5.9.3(Insock water absorption and desorption)	-	600	-
5.11.1(Outsole material)	-	125	-
5.11.1(Outsole thickness)	-	125	-
5.11.2(Outsole density)	-	500	-
5.11.3(Outsole Interlayer bond)	-	600	-
5.11.4(Outsole tear)	-	600	-
5.11.5(Outsole Abrasion)	-	840	-
5.11.6(Outsole hardness)	-	800	-
5.11.7(Outsole flexing)	-	600	-
5.11.8(Outsole cold flex resistance)	-	1000	-
6.1(Volatility)	-	300	-
6.2(Lead content)	-	300	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
Table 1 as per IS 17011 2018(pH)	-	300	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	2000	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	1000	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	700	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	1500	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	1500	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	1500	-
5.10(Closing Thread (If used))	-	600	-

21 Jul, 2028

-
Revised Version of IS 12254:2021. Included w.e.f. 07.03.2023

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	8750	-
5.2(Message Readability)	-	8750	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-

21 Jul, 2028

-
Revised Version of IS 16333(Part-3):2022. Included w.e.f. 15.03.2023

IS 3521 : Part 2 (2021)

Personal Fall Arrest Systems Specification Part 2 Lanyards and Energy Absorbers

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.5(Adjustment Slippage)	-	1000	-
4.2.6(Static strength)	-	3000	-
4.2.7(Dynamic strength for adjustable lanyards)	-	5000	-
4.3.5(Dynamic performance)	-	2000	-
5.2.4(Corrosion resistance)	-	5000	-
4.2.5(Adjustment Slippage)	-	0	-
4.2.6(Static strength)	-	0	-
4.2.7(Dynamic strength for adjustable lanyards)	-	0	-
4.3.5(Dynamic performance)	-	0	-
5.2.4(Corrosion resistance)	-	0	-
4.3.4(Inadvertent operation)	-	1500	-
4.2.5(Adjustment Slippage)	-	0	-
4.2.6(Static strength)	-	0	-
4.2.7(Dynamic strength for adjustable lanyards)	-	0	-
4.3.5(Dynamic performance)	-	0	-
5.2.4(Corrosion resistance)	-	0	-
4.3.4(Inadvertent operation)	-	0	-
4.3.3(Energy-absorbing lanyards and FBH with energy absorber)	-	0	-
4.3.6(Static strength)	-	500	-
4.3.7(Dynamic performance after conditioning)	-	4000	-
4.2.3(Terminations)	-	1000	-
4.2.2(Chains)	-	1000	-
4.2.1(Fibre ropes and webbing)	-	1000	-

21 Jul, 2028

-
Included w.e.f. 07.11.2022.

IS 3521 : Part 1 (2021)

Personal Fall Arrest Systems Specification Part 1 Full Body Harness Fourth Revision

31600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2.1(Breaking strength of Synthetic fibre)	-	0	-
4.3.2.1(Breaking strength of webbing)	-	1200	-
4.3.2.2(Width of the webbing)	-	200	-
4.3.2.3(No of stitches per cm)	-	200	-
4.3.2.4(Flammability)	-	5000	-
4.4(Thickness of metal plating)	-	1000	-
4.4(Corrosion resistance)	-	5000	-
4.5(Buckle Uncoupling and Slippage)	-	1000	-
4.6(Static Strength)	-	3000	-
4.7(Dynamic Performance)	-	5000	-
4.9(Static Suspension Angle Test for Class AE FBH)	-	2000	-
4.3.2.1(Breaking strength of Synthetic fibre)	-	0	-
4.3.2.1(Breaking strength of webbing)	-	0	-
4.3.2.2(Width of the webbing)	-	0	-
4.3.2.3(No of stitches per cm)	-	0	-
4.3.2.4(Flammability)	-	0	-
4.4(Thickness of metal plating)	-	0	-
4.4(Corrosion resistance)	-	0	-
4.5(Buckle Uncoupling and Slippage)	-	0	-
4.6(Static Strength)	-	0	-
4.7(Dynamic Performance)	-	0	-
4.9(Static Suspension Angle Test for Class AE FBH)	-	0	-
4.8(Static Suspension Test)	-	2000	-
5.2(Corrosion Test)	-	0	-
5.3(Buckle Shake Test)	-	0	-
5.4(Static Strength Test for Fall-arrest Attachment Elements)	-	0	-
5.5(Static Strength Test for Controlled-descent Attachment Elements)	-	3000	-
5.6(Static Strength Test for Confined-space Access Attachment Elements)	-	3000	-
5.7(Dynamic Performance Tests)	-	0	-
5.8(Static Suspension Test for Fall-arrest Attachment Elements)	-	0	-
5.9(Static suspension Angle Test for Class AE FBH)	-	0	-
5.10(Flammability Resistance Test)	-	0	-

21 Jul, 2028

-
Included w.e.f. 07.11.2022.

Bureau of Indian Standards

The National Standards Body of India

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

D-115 A, Hosiery Complex, Phase-II, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 alplgreaternoida@gmail.com

Scope List