BIS - LIMS (Laboratory Information Management System)

NDL POWER LIMITED

KHEWAT NO. 240/189, ISMAILA-11B, SAMPLA BERI ROAD, SAMPLA, Rohtak, Haryana, 124501

7082999760 ramesh.tiwani@ndlpower.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16659 (2017)

Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment

11000.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1-Table 1-i)(Appearance)	-	250.0	ok
4.1-Table 1-ii)(Viscosity at 100 °C)	-	500.0	ok
4.1-Table 1-iii)(Viscosity at 40 °C)	-	500.0	ok
4.1-Table 1-iv)(Pour point)	-	500.0	ok
4.1-Table 1-v)(Water content)	-	500.0	ok
4.1-Table 1-vi)(Density at 20 °C)	-	500.0	ok
4.1-Table 1-vii)(Breakdown voltage)	-	500.0	ok
4.1-Table 1-viii)(Dissipation factor (tan δ) 90 °C)	-	850.0	ok
4.1-Table 1-ix)(Soluble acidity)	-	500.0	ok
4.1-Table 1-x)(Corrosive sulfur DBDS)	-	3500.0	ok
4.1-Table 1-xi)(Total additives)	-	0.0	We are not having Proper Testing Facility
4.1-Table 1-xii)(Performance – Salient properties after oxidation stability test)	-	0.0	ok
4.1-Table 1-xiii)(Total acidity)	-	500.0	ok
4.1-Table 1-xiv)(Viscosity at 40 °C)	-	500.0	ok
4.1-Table 1-xv)(DDF (tan δ) at 90 °C)	-	850.0	ok
4.3.3(Relative permittivity (dielectric constant))	-	850.0	ok
4.1-Table 1-xvi)(Fire point Flash point)	-	500.0	ok

Complete

11 Nov, 2024

11 Nov, 2027

Biodegradation (Cl 4.1 Table 1-xvii), Total Additives (Cl 4.1 Table 1-xi)

IS 16081 (2013)

Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes

12500.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Flash point and fire point)	-	500.0	ok
7.1.2(Appearance)	-	250.0	ok
7.1.3(Density)	-	500.0	ok
7.1.4(Kinematic viscosity)	-	500.0	ok
7.1.5(Flash point and fire point)	-	500.0	ok
7.1.6(Pour point)	-	500.0	ok
7.1.8(Water content)	-	500.0	ok
7.1.9(Acidity)	-	500.0	ok
7.1.10(Oxidation stability)	-	7500.0	ok
8.1(Breakdown voltage)	-	500.0	ok
8.2(Dielectric dissipation factor, permittivity and d.c. resistivity)	-	850.0	ok
9(Specifications for synthetic organic esters used in transformers)	-	0.0	ok
9(Specifications for synthetic organic esters used in transformers)	-	0.0	ok
5.3(Toxicity)	-	0.0	ok
6.1(Classification)	-	0.0	ok
6.2(Identification and general delivery requirements, sampling, packaging and disposal)	-	0.0	ok
6.3(Storage)	-	0.0	ok
6.4(Representative sampling)	-	0.0	ok
6.5(Disposal and spillages)	-	0.0	ok
4(General remarks)	-	0.0	ok
4(General remarks)	-	0.0	ok
7.1.10(Oxidation stability)	-	7500.0	ok
7.1.2(Appearance)	-	250.0	ok
7.1.3(Density)	-	500.0	ok
7.1.4(Kinematic viscosity)	-	500.0	ok
7.1.5(Flash point and fire point)	-	500.0	ok
7.1.6(Pour point)	-	500.0	ok
7.1.8(Water content)	-	500.0	ok
7.1.9(Acidity)	-	500.0	ok
5.1(Flash point and fire point)	-	500.0	ok
5.3(Toxicity)	-	0.0	ok
6.1(Classification)	-	0.0	ok
6.2(Identification and general delivery requirements, sampling, packaging and disposal)	-	0.0	ok
6.3(Storage)	-	0.0	ok
6.4(Representative sampling)	-	0.0	ok
6.5(Disposal and spillages)	-	0.0	ok
8.1(Breakdown voltage)	-	500.0	ok
8.2(Dielectric dissipation factor, permittivity and d.c. resistivity)	-	850.0	ok

Complete

11 Nov, 2024

11 Nov, 2027

Biodegradation (Cl 5.2), Gassing Tendency (Cl 8.3), Crystallization (Cl 7.1.7), Colour (Cl 7.1.1), Viscosity at - 20 degree Calcious (Cl. 9)

IS 335 (2018)

New insulating oils - Specification (Fifth Revision)

21000.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Viscosity)	-	500.0	ok
6.2(Pour Point)	-	500.0	ok
6..3(Water Content)	-	500.0	ok
6.4(Breakdown Voltage)	-	500.0	ok
6.5(Dielectric Dissipation Factor (DDF))	-	850.0	ok
6.6(Appearance)	-	250.0	ok
6.7(Acidity)	-	500.0	ok
6.8(Interfacial Tension (IFT))	-	500.0	ok
6.1(Corrosive Sulphur and Potentially Corrosive Sulphur)	-	2000.0	ok
6.11(Additives)	-	3500.0	ok
6.12(Oxidation Stability)	-	7500.0	ok
6.15(Flash Point)	-	350.0	ok
6.16(Density)	-	500.0	ok
6.18(Polychlorinated Biphenyls (PCB))	-	7500.0	ok
6.19(2-Furfural (2-FAL) and Related Compounds Content)	-	3900.0	ok
6.21(DBDS Content)	-	3500.0	ok
6.22(Stray Gassing of Oil)	-	2500.0	ok
6.0(General)	-	0.0	ok
5.2(Requirements)	-	0.0	ok
5.3(Miscibility)	-	250.0	ok
4, 5.2, 6, Table 2(Viscosity at 40°C)	-	500.0	ok
4, 5.2, 6, Table 2(Viscosity at 0°C)	-	500.0	ok
4, 5.2, 6, Table 2(Pour point)	-	500.0	ok
4, 5.2, 6, Table 2(Water content)	-	500.0	ok
4, 5.2, 6, Table 2(Breakdown voltage)	-	500.0	ok
4, 5.2, 6, Table 2(Density at 20°C)	-	500.0	ok
4, 5.2, 6, Table 2(DDF at 90°C)	-	850.0	ok
4, 5.2, 6, Table 2(Appearance)	-	250.0	ok
4, 5.2, 6, Table 2(Acidity)	-	250.0	ok
4, 5.2, 6, Table 2(Interfacial tension)	-	500.0	ok
4, 5.2, 6, Table 2(Corrosive sulphur)	-	2000.0	ok
4, 5.2, 6, Table 2(DBDS)	-	3500.0	ok
4, 5.2, 6, Table 2(Inhibitors according to IS 13631/IEC 60666)	-	3500.0	ok
4, 5.2, 6, Table 2(Metal passivator additives according to IS 13631/IEC 60666)	-	3500.0	ok
4, 5.2, 6, Table 2(Other additives)	-	0.0	ok
4, 5.2, 6, Table 2(2-Furfural and related compounds content)	-	3900.0	ok
4, 5.2, 6, Table 2(Oxidation stability)	-	7500.0	ok
4, 5.2, 6, Table 2(Total acidity)	-	500.0	ok
4, 5.2, 6, Table 2(Sludge)	-	500.0	ok
4, 5.2, 6, Table 2(DDF at 90°C)	-	850.0	ok
4, 5.2, 6, Table 2(Flash point)	-	350.0	ok
4, 5.2, 6, Table 2(PCB content)	-	7500.0	ok
7.1 (a)(Total acidity)	-	500.0	ok
7.1 (b)(Sludge)	-	500.0	ok
7.1 (c)(DDF at 90°C)	-	850.0	ok
5.1(Classification)	-	0.0	ok
4, 5.1.3, 6.1, Table 1(Maximum Viscosity)	-	0.0	ok

Complete

11 Nov, 2024

11 Nov, 2027

Sulphur Content (Cl 6.9), Gassing Tendency (Cl 6.13), ECT Tendency (Cl 6.14), PCA (CI 6.17), Particle Content (C16.2), Viscosity - 30 ^ 0 & - 40 deg C (Cl 4.5.2.6 Table 2), Additives (Cl 6.11)

Bureau of Indian Standards

The National Standards Body of India

NDL POWER LIMITED

KHEWAT NO. 240/189, ISMAILA-11B, SAMPLA BERI ROAD, SAMPLA, Rohtak, Haryana, 124501

7082999760 ramesh.tiwani@ndlpower.com

Scope List