BIS - LIMS (Laboratory Information Management System)

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

12, PRESTIGE GARDEN VISTAR, SIWAR MOD, ROAD NO. 5, RIICO INDUSTRIAL AREA BINDAYAKA, JAIPUR, Jaipur, Rajasthan, 302012

9785071246 info@ctltestinglaboratory.com

Scope List

Reset

32 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 18166 (2025)

Unplasticized Polyvinyl Chloride PVC-U Threaded Column Pipes for Borewells/Tubewells - Specification

29800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	29800	10 Percent Discount For BIS
6(CLASSIFICATION)	-	29800	10 Percent Discount For BIS
7, Table - 2,3,4,7(DIMENSIONS)	-	29800	10 Percent Discount For BIS
8.3 , Table 5, 6(Basic Thread Dimensions)	-	29800	10 Percent Discount For BIS
9.1(Visual Appearance)	-	29800	10 Percent Discount For BIS
9.2(Resistance to External Blows at 0 °C)	-	29800	10 Percent Discount For BIS
9.4(Tensile Strength)	-	29800	10 Percent Discount For BIS
9.4(Elongation at Break)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.8(Density)	-	29800	10 Percent Discount For BIS
9.9(Vicat Softening Temperature)	-	29800	10 Percent Discount For BIS
8.1(Column Pipes)	-	29800	10 Percent Discount For BIS
8.2(Column Couplers)	-	29800	10 Percent Discount For BIS
8.4(Sealing rings and elements made of elastomeric material such as EPDM,)	-	29800	10 Percent Discount For BIS
9.5 , Table- 9(Ultimate Breaking Load)	-	29800	10 Percent Discount For BIS
9.11(Hydrostatic Pressure Test)	-	29800	10 Percent Discount For BIS
9.12(Joint Leak Pressure Test)	-	29800	10 Percent Discount For BIS
9.3(Flattening Test)	-	29800	10 Percent Discount For BIS
9.7(Resistance to DCM)	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (first extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
5(COLOUR)	-	29800	10 Percent Discount For BIS
6(CLASSIFICATION)	-	29800	10 Percent Discount For BIS
7, Table - 2,3,4,7(DIMENSIONS)	-	29800	10 Percent Discount For BIS
8.3 , Table 5, 6(Basic Thread Dimensions)	-	29800	10 Percent Discount For BIS
9.1(Visual Appearance)	-	29800	10 Percent Discount For BIS
9.2(Resistance to External Blows at 0 °C)	-	29800	10 Percent Discount For BIS
9.4(Tensile Strength)	-	29800	10 Percent Discount For BIS
9.4(Elongation at Break)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.8(Density)	-	29800	10 Percent Discount For BIS
9.9(Vicat Softening Temperature)	-	29800	10 Percent Discount For BIS
8.1(Column Pipes)	-	29800	10 Percent Discount For BIS
8.2(Column Couplers)	-	29800	10 Percent Discount For BIS
8.4(Sealing rings and elements made of elastomeric material such as EPDM,)	-	29800	10 Percent Discount For BIS
9.5 , Table- 9(Ultimate Breaking Load)	-	29800	10 Percent Discount For BIS
9.11(Hydrostatic Pressure Test)	-	29800	10 Percent Discount For BIS
9.12(Joint Leak Pressure Test)	-	29800	10 Percent Discount For BIS
9.3(Flattening Test)	-	29800	10 Percent Discount For BIS
9.7(Resistance to DCM)	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (first extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
5(COLOUR)	-	29800	10 Percent Discount For BIS
6(CLASSIFICATION)	-	29800	10 Percent Discount For BIS
7, Table - 2,3,4,7(DIMENSIONS)	-	29800	10 Percent Discount For BIS
8.3 , Table 5, 6(Basic Thread Dimensions)	-	29800	10 Percent Discount For BIS
9.1(Visual Appearance)	-	29800	10 Percent Discount For BIS
9.2(Resistance to External Blows at 0 °C)	-	29800	10 Percent Discount For BIS
9.4(Tensile Strength)	-	29800	10 Percent Discount For BIS
9.4(Elongation at Break)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.8(Density)	-	29800	10 Percent Discount For BIS
9.9(Vicat Softening Temperature)	-	29800	10 Percent Discount For BIS
8.1(Column Pipes)	-	29800	10 Percent Discount For BIS
8.2(Column Couplers)	-	29800	10 Percent Discount For BIS
8.4(Sealing rings and elements made of elastomeric material such as EPDM,)	-	29800	10 Percent Discount For BIS
9.5 , Table- 9(Ultimate Breaking Load)	-	29800	10 Percent Discount For BIS
9.11(Hydrostatic Pressure Test)	-	29800	10 Percent Discount For BIS
9.12(Joint Leak Pressure Test)	-	29800	10 Percent Discount For BIS
9.3(Flattening Test)	-	29800	10 Percent Discount For BIS
9.7(Resistance to DCM)	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (first extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
5(COLOUR)	-	29800	10 Percent Discount For BIS
6(CLASSIFICATION)	-	29800	10 Percent Discount For BIS
7, Table - 2,3,4,7(DIMENSIONS)	-	29800	10 Percent Discount For BIS
8.3 , Table 5, 6(Basic Thread Dimensions)	-	29800	10 Percent Discount For BIS
9.1(Visual Appearance)	-	29800	10 Percent Discount For BIS
9.2(Resistance to External Blows at 0 °C)	-	29800	10 Percent Discount For BIS
9.4(Tensile Strength)	-	29800	10 Percent Discount For BIS
9.4(Elongation at Break)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.8(Density)	-	29800	10 Percent Discount For BIS
9.9(Vicat Softening Temperature)	-	29800	10 Percent Discount For BIS
8.1(Column Pipes)	-	29800	10 Percent Discount For BIS
8.2(Column Couplers)	-	29800	10 Percent Discount For BIS
8.4(Sealing rings and elements made of elastomeric material such as EPDM,)	-	29800	10 Percent Discount For BIS
9.5 , Table- 9(Ultimate Breaking Load)	-	29800	10 Percent Discount For BIS
9.11(Hydrostatic Pressure Test)	-	29800	10 Percent Discount For BIS
9.12(Joint Leak Pressure Test)	-	29800	10 Percent Discount For BIS
9.3(Flattening Test)	-	29800	10 Percent Discount For BIS
9.7(Resistance to DCM)	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (first extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
5(COLOUR)	-	29800	10 Percent Discount For BIS
6(CLASSIFICATION)	-	29800	10 Percent Discount For BIS
7, Table - 2,3,4,7(DIMENSIONS)	-	29800	10 Percent Discount For BIS
8.3 , Table 5, 6(Basic Thread Dimensions)	-	29800	10 Percent Discount For BIS
9.1(Visual Appearance)	-	29800	10 Percent Discount For BIS
9.2(Resistance to External Blows at 0 °C)	-	29800	10 Percent Discount For BIS
9.4(Tensile Strength)	-	29800	10 Percent Discount For BIS
9.4(Elongation at Break)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.6(Izod Impact Strength Test)	-	29800	10 Percent Discount For BIS
9.8(Density)	-	29800	10 Percent Discount For BIS
9.9(Vicat Softening Temperature)	-	29800	10 Percent Discount For BIS
8.1(Column Pipes)	-	29800	10 Percent Discount For BIS
8.2(Column Couplers)	-	29800	10 Percent Discount For BIS
8.4(Sealing rings and elements made of elastomeric material such as EPDM,)	-	29800	10 Percent Discount For BIS
9.5 , Table- 9(Ultimate Breaking Load)	-	29800	10 Percent Discount For BIS
9.11(Hydrostatic Pressure Test)	-	29800	10 Percent Discount For BIS
9.12(Joint Leak Pressure Test)	-	29800	10 Percent Discount For BIS
9.3(Flattening Test)	-	29800	10 Percent Discount For BIS
9.7(Resistance to DCM)	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (first extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Lead (third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS
9. 10(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	29800	10 Percent Discount For BIS

24 Sep, 2027

-
Included w.e.f 11.12.2025

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	10% DISCOUNT FOR BIS
4.1.2(Sack Width)	-	200	10% DISCOUNT FOR BIS
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	10% DISCOUNT FOR BIS
4.1.4(Patch Length)	-	200	10% DISCOUNT FOR BIS
4.1.5(Patch Height)	-	200	10% DISCOUNT FOR BIS
4.1.6(Length of Valve)	-	300	10% DISCOUNT FOR BIS
4.1.7(Width of Valve Sleeve)	-	500	10% DISCOUNT FOR BIS
4.1.8(Length of Valve Sleeve)	-	500	10% DISCOUNT FOR BIS
5.1(Raw Material)	-	1500	10% DISCOUNT FOR BIS
5.2(Fabric)	-	2500	10% DISCOUNT FOR BIS
5.2(Tape density and width)	-	500	10% DISCOUNT FOR BIS
5.4(Lamination for PP)	-	1500	10% DISCOUNT FOR BIS
5.4(Lamination for LDPE)	-	500	10% DISCOUNT FOR BIS
6.1(Mass of Bale)	-	500	10% DISCOUNT FOR BIS
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1500	10% DISCOUNT FOR BIS
6.2.2(Weld Strength of Top and Bottom Closures)	-	200	10% DISCOUNT FOR BIS
6.3(Drop Impact Testing of Filled Sacks)	-	1200	10% DISCOUNT FOR BIS
6.4(Ash Content)	-	700	10% DISCOUNT FOR BIS
6.5(Air Permeability)	-	0	10% DISCOUNT FOR BIS
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	10% DISCOUNT FOR BIS
Cl-5.6(Capacity)	-	200	10% DISCOUNT FOR BIS
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	200	10% DISCOUNT FOR BIS
Cl-6.6, Table-1 (iii)(Picks per dm)	-	200	10% DISCOUNT FOR BIS
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1500	10% DISCOUNT FOR BIS
4.1.1(Sack Length)	-	200	10% DISCOUNT FOR BIS
4.1.2(Sack Width)	-	200	10% DISCOUNT FOR BIS
4.1.3(Top Closure Width and Bottom Closure Width)	-	200	10% DISCOUNT FOR BIS
4.1.4(Patch Length)	-	300	10% DISCOUNT FOR BIS
4.1.5(Patch Height)	-	300	10% DISCOUNT FOR BIS
4.1.6(Length of Valve)	-	300	10% DISCOUNT FOR BIS
4.1.7(Width of Valve Sleeve)	-	300	10% DISCOUNT FOR BIS
4.1.8(Length of Valve Sleeve)	-	300	10% DISCOUNT FOR BIS
5.1(Raw Material)	-	1500	10% DISCOUNT FOR BIS
5.2(Fabric)	-	500	10% DISCOUNT FOR BIS
5.2(Tape density and width)	-	1000	10% DISCOUNT FOR BIS
5.4(Lamination for PP)	-	1200	10% DISCOUNT FOR BIS
5.4(Lamination for LDPE)	-	1000	10% DISCOUNT FOR BIS
6.1(Mass of Bale)	-	300	10% DISCOUNT FOR BIS
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1500	10% DISCOUNT FOR BIS
6.2.2(Weld Strength of Top and Bottom Closures)	-	1200	10% DISCOUNT FOR BIS
6.3(Drop Impact Testing of Filled Sacks)	-	1000	10% DISCOUNT FOR BIS
6.4(Ash Content)	-	700	10% DISCOUNT FOR BIS
6.5(Air Permeability)	-	1200	10% DISCOUNT FOR BIS
8(Atomspheric Conditions for Conditioning and Testing)	-	500	10% DISCOUNT FOR BIS
Cl-5.6(Capacity)	-	200	10% DISCOUNT FOR BIS
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	200	10% DISCOUNT FOR BIS
Cl-6.6, Table-1 (iii)(Picks per dm)	-	200	10% DISCOUNT FOR BIS
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1500	10% DISCOUNT FOR BIS
4.1.1(Sack Length)	-	200	10% DISCOUNT FOR BIS
4.1.2(Sack Width)	-	200	10% DISCOUNT FOR BIS
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	10% DISCOUNT FOR BIS
4.1.4(Patch Length)	-	500	10% DISCOUNT FOR BIS
4.1.5(Patch Height)	-	500	10% DISCOUNT FOR BIS
4.1.6(Length of Valve)	-	500	10% DISCOUNT FOR BIS
4.1.7(Width of Valve Sleeve)	-	300	10% DISCOUNT FOR BIS
4.1.8(Length of Valve Sleeve)	-	300	10% DISCOUNT FOR BIS
5.1(Raw Material)	-	1500	10% DISCOUNT FOR BIS
5.2(Fabric)	-	500	10% DISCOUNT FOR BIS
5.2(Tape density and width)	-	500	10% DISCOUNT FOR BIS
5.4(Lamination for PP)	-	500	10% DISCOUNT FOR BIS
5.4(Lamination for LDPE)	-	500	10% DISCOUNT FOR BIS
6.1(Mass of Bale)	-	500	10% DISCOUNT FOR BIS
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1500	10% DISCOUNT FOR BIS
6.2.2(Weld Strength of Top and Bottom Closures)	-	200	10% DISCOUNT FOR BIS
6.3(Drop Impact Testing of Filled Sacks)	-	1000	10% DISCOUNT FOR BIS
6.4(Ash Content)	-	700	10% DISCOUNT FOR BIS
6.5(Air Permeability)	-	700	10% DISCOUNT FOR BIS
8(Atomspheric Conditions for Conditioning and Testing)	-	500	10% DISCOUNT FOR BIS
Cl-5.6(Capacity)	-	200	10% DISCOUNT FOR BIS
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	200	10% DISCOUNT FOR BIS
Cl-6.6, Table-1 (iii)(Picks per dm)	-	200	10% DISCOUNT FOR BIS
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1500	10% DISCOUNT FOR BIS
4.1.1(Sack Length)	-	-	-
4.1.2(Sack Width)	-	-	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	-	-
4.1.4(Patch Length)	-	-	-
4.1.5(Patch Height)	-	-	-
4.1.6(Length of Valve)	-	-	-
4.1.7(Width of Valve Sleeve)	-	-	-
4.1.8(Length of Valve Sleeve)	-	-	-
5.1(Raw Material)	-	-	-
5.2(Fabric)	-	-	-
5.2(Tape density and width)	-	-	-
5.4(Lamination for PP)	-	-	-
5.4(Lamination for LDPE)	-	-	-
6.1(Mass of Bale)	-	-	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	-	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	-	-
6.3(Drop Impact Testing of Filled Sacks)	-	-	-
6.4(Ash Content)	-	-	-
6.5(Air Permeability)	-	-	-
8(Atomspheric Conditions for Conditioning and Testing)	-	-	-
Cl-5.6(Capacity)	-	-	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	-	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	-	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	-	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	-	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	-	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	-	-

24 Sep, 2027

-
included w.e.f 09-12-2025.

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

29700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	3000	10% DISCOUNT FOR BIS
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
5.3(Lamination)	-	1000	10% DISCOUNT FOR BIS
5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
5.5(Capacity)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
6.4(UV Resistance Test)	-	3000	10% DISCOUNT FOR BIS
7(PRINTING, PACKAGING AND MARKING)	-	1000	10% DISCOUNT FOR BIS
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
5.1(MANUFACTURE - Raw Materials)	-	3000	10% DISCOUNT FOR BIS
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
5.3(Lamination)	-	1000	10% DISCOUNT FOR BIS
5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
5.5(Capacity)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
6.4(UV Resistance Test)	-	3000	10% DISCOUNT FOR BIS
7(PRINTING, PACKAGING AND MARKING)	-	1000	10% DISCOUNT FOR BIS
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
5.1(MANUFACTURE - Raw Materials)	-	3000	10% DISCOUNT FOR BIS
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
5.3(Lamination)	-	1000	10% DISCOUNT FOR BIS
5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
5.5(Capacity)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
6.4(UV Resistance Test)	-	3000	10% DISCOUNT FOR BIS
7(PRINTING, PACKAGING AND MARKING)	-	1000	10% DISCOUNT FOR BIS
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
5.1(MANUFACTURE - Raw Materials)	-	3000	10% DISCOUNT FOR BIS
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
5.3(Lamination)	-	1000	10% DISCOUNT FOR BIS
5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
5.5(Capacity)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
6.4(UV Resistance Test)	-	3000	10% DISCOUNT FOR BIS
7(PRINTING, PACKAGING AND MARKING)	-	1000	10% DISCOUNT FOR BIS
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
5.1(MANUFACTURE - Raw Materials)	-	3000	10% DISCOUNT FOR BIS
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
5.3(Lamination)	-	1000	10% DISCOUNT FOR BIS
5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
5.5(Capacity)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
6.4(UV Resistance Test)	-	3000	10% DISCOUNT FOR BIS
7(PRINTING, PACKAGING AND MARKING)	-	1000	10% DISCOUNT FOR BIS
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
5.1(MANUFACTURE - Raw Materials)	-	3000	10% DISCOUNT FOR BIS
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	2500	10% DISCOUNT FOR BIS
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	2000	10% DISCOUNT FOR BIS
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
5.3(Lamination)	-	1000	10% DISCOUNT FOR BIS
5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
5.5(Capacity)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	10% DISCOUNT FOR BIS
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	1000	10% DISCOUNT FOR BIS
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	2500	10% DISCOUNT FOR BIS
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	2000	10% DISCOUNT FOR BIS
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	2000	10% DISCOUNT FOR BIS
6.4(UV Resistance Test)	-	3000	10% DISCOUNT FOR BIS
7(PRINTING, PACKAGING AND MARKING)	-	1000	10% DISCOUNT FOR BIS
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 5.4(Sack Fabrication)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS
Clause 5.1(Raw Materials)	-	3000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	1000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	2500	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2000	10% DISCOUNT FOR BIS
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	2000	10% DISCOUNT FOR BIS
Clause 5.3(Lamination with a thin film of polypropylene)	-	1000	10% DISCOUNT FOR BIS
Clause 7.3(Marking on Sacks)	-	1000	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f 11.12.2025

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	1000	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	1000	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	1000	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	1000	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	1000	10% DISCOUNT FOR BIS
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	1000	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	250	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	23000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	10% DISCOUNT FOR BIS
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	1000	10% DISCOUNT FOR BIS
4.1(Raw Material )	-	1000	10% DISCOUNT FOR BIS
4.2 (Fabric)	-	250	10% DISCOUNT FOR BIS
4.2 (Linear Density, 900 denier)	-	250	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	10% DISCOUNT FOR BIS
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	500	10% DISCOUNT FOR BIS
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	10% DISCOUNT FOR BIS
4.3(Sacks)	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	500	10% DISCOUNT FOR BIS
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	10% DISCOUNT FOR BIS
4.4(to a depth of minimum 25 mm, so that so that)	-	500	10% DISCOUNT FOR BIS
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	1000	10% DISCOUNT FOR BIS
4.4(The number of stitches/dm shall be 14 ± 2.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.4(Seam)	-	500	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.5(Lamination )	-	1000	10% DISCOUNT FOR BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	10% DISCOUNT FOR BIS
4.7(Valve for Filling of Sacks)	-	1000	10% DISCOUNT FOR BIS
4.7(There shall be a double fold at the top seam and)	-	1000	10% DISCOUNT FOR BIS
4.7(and then stitching shall be done through six layers.)	-	1000	10% DISCOUNT FOR BIS
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	1000	10% DISCOUNT FOR BIS
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	1000	10% DISCOUNT FOR BIS
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	1000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2500	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	2000	10% DISCOUNT FOR BIS
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	2000	10% DISCOUNT FOR BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	2000	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1200	10% DISCOUNT FOR BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1200	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	500	10% DISCOUNT FOR BIS
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	500	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f 11.12.2025

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
3(TYPES)	-	300	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	300	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	300	10% DISCOUNT FOR BIS
4.2(Construction)	-	300	10% DISCOUNT FOR BIS
4.3(Sacks)	-	300	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	300	10% DISCOUNT FOR BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	300	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	10% DISCOUNT FOR BIS
4.3.1(The number of stitches/dm)	-	300	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	300	10% DISCOUNT FOR BIS
4.4 and Table 1 i(Capacity)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	300	10% DISCOUNT FOR BIS
5.1 and Table 1 v(Mass of sack )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	300	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	300	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	300	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f 11.12.2025

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	16900	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	16900	10% DISCOUNT FOR BIS
4.2(Construction)	-	16900	10% DISCOUNT FOR BIS
4.3(Sacks)	-	16900	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	16900	10% DISCOUNT FOR BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	16900	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	16900	10% DISCOUNT FOR BIS
4.3.1(stitches/dm)	-	16900	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	16900	10% DISCOUNT FOR BIS
4.4(Liner IS 10146 or IS 10910.)	-	16900	10% DISCOUNT FOR BIS
4.4(Mass of the loose liner )	-	16900	10% DISCOUNT FOR BIS
4.4(Width of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4(Length of the line)	-	16900	10% DISCOUNT FOR BIS
4.4(Bottom seam of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4.1(Liner)	-	16900	10% DISCOUNT FOR BIS
4.5 and Table 1 i(Capacity)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	16900	10% DISCOUNT FOR BIS
3(TYPES)	-	16900	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	16900	10% DISCOUNT FOR BIS
4.2(Construction)	-	16900	10% DISCOUNT FOR BIS
4.3(Sacks)	-	16900	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	16900	10% DISCOUNT FOR BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	16900	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	16900	10% DISCOUNT FOR BIS
4.3.1(stitches/dm)	-	16900	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	16900	10% DISCOUNT FOR BIS
4.4(Liner IS 10146 or IS 10910.)	-	16900	10% DISCOUNT FOR BIS
4.4(Mass of the loose liner )	-	16900	10% DISCOUNT FOR BIS
4.4(Width of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4(Length of the line)	-	16900	10% DISCOUNT FOR BIS
4.4(Bottom seam of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4.1(Liner)	-	16900	10% DISCOUNT FOR BIS
4.5 and Table 1 i(Capacity)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	16900	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	16900	10% DISCOUNT FOR BIS
5.3(UV Resistance)	-	16900	10% DISCOUNT FOR BIS
Cl-4.4 (Amendment-3)(Thickness of liner)	-	16900	10% DISCOUNT FOR BIS
3(TYPES)	-	16900	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	16900	10% DISCOUNT FOR BIS
4.2(Construction)	-	16900	10% DISCOUNT FOR BIS
4.3(Sacks)	-	16900	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	16900	10% DISCOUNT FOR BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	16900	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	16900	10% DISCOUNT FOR BIS
4.3.1(stitches/dm)	-	16900	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	16900	10% DISCOUNT FOR BIS
4.4(Liner IS 10146 or IS 10910.)	-	16900	10% DISCOUNT FOR BIS
4.4(Mass of the loose liner )	-	16900	10% DISCOUNT FOR BIS
4.4(Width of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4(Length of the line)	-	16900	10% DISCOUNT FOR BIS
4.4(Bottom seam of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4.1(Liner)	-	16900	10% DISCOUNT FOR BIS
4.5 and Table 1 i(Capacity)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	16900	10% DISCOUNT FOR BIS
3(TYPES)	-	16900	10% DISCOUNT FOR BIS
4.1(Raw Material)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	16900	10% DISCOUNT FOR BIS
4.2(Tapes – Linear Density )	-	16900	10% DISCOUNT FOR BIS
4.2(Construction)	-	16900	10% DISCOUNT FOR BIS
4.3(Sacks)	-	16900	10% DISCOUNT FOR BIS
4.3.1(Bottom Seam)	-	16900	10% DISCOUNT FOR BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The outer stitch)	-	16900	10% DISCOUNT FOR BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	16900	10% DISCOUNT FOR BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	16900	10% DISCOUNT FOR BIS
4.3.1(stitches/dm)	-	16900	10% DISCOUNT FOR BIS
4.3.2(Mouth)	-	16900	10% DISCOUNT FOR BIS
4.4(Liner IS 10146 or IS 10910.)	-	16900	10% DISCOUNT FOR BIS
4.4(Mass of the loose liner )	-	16900	10% DISCOUNT FOR BIS
4.4(Width of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4(Length of the line)	-	16900	10% DISCOUNT FOR BIS
4.4(Bottom seam of the loose liner)	-	16900	10% DISCOUNT FOR BIS
4.4.1(Liner)	-	16900	10% DISCOUNT FOR BIS
4.5 and Table 1 i(Capacity)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	16900	10% DISCOUNT FOR BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	16900	10% DISCOUNT FOR BIS
5.2 and Table 1 x(Ash content )	-	16900	10% DISCOUNT FOR BIS
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	16900	10% DISCOUNT FOR BIS
5.3(UV Resistance)	-	16900	10% DISCOUNT FOR BIS
Cl-4.4 (Amendment-3)(Thickness of liner)	-	16900	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f 15.10.2025

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

15 TO 150 MM

102000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	250	10% DISCOUNT FOR BIS
3.2(Nominal Outside Diameter)	-	250	10% DISCOUNT FOR BIS
3.3(Mean Inside Diameter of Socket at Entry)	-	500	10% DISCOUNT FOR BIS
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	10% DISCOUNT FOR BIS
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	10% DISCOUNT FOR BIS
3.5(Out-of-Roundness (Ovality))	-	500	10% DISCOUNT FOR BIS
3.6(Nominal Wall Thickness)	-	500	10% DISCOUNT FOR BIS
3.7(Minimum Wall Thickness)	-	250	10% DISCOUNT FOR BIS
3.8(Tolerance)	-	250	10% DISCOUNT FOR BIS
3.9(Working Pressure)	-	500	10% DISCOUNT FOR BIS
3.1(Standard Dimension Ratio)	-	250	10% DISCOUNT FOR BIS
3.11(Type Tests)	-	60000	10% DISCOUNT FOR BIS
3.11(Acceptance Tests)	-	15000	10% DISCOUNT FOR BIS
6(Composition)	-	3500	10% DISCOUNT FOR BIS
7(Dimensions of fitting)	-	0	10% DISCOUNT FOR BIS
8.2(Opacity)	-	1500	10% DISCOUNT FOR BIS
8.1(Visual Appearance)	-	200	10% DISCOUNT FOR BIS
8.3(Stress Relief Test)	-	1500	10% DISCOUNT FOR BIS
8.4(Vicat softening Temperature)	-	2000	10% DISCOUNT FOR BIS
8.5(Density)	-	1500	10% DISCOUNT FOR BIS
8.6(Effect on water)	-	3500	V
9(Mechanical Properties)	-	3500	10% DISCOUNT FOR BIS
11(Marking)	-	0	10% DISCOUNT FOR BIS
Cl-6.2.2(Compound Chlorine Content)	-	3500	10% DISCOUNT FOR BIS
Cl-6.2.5(Verification of the Malfunction Temperature)	-	25000	10% DISCOUNT FOR BIS
Cl-9.1(Hydrostatic Characteristics)	-	25000	10% DISCOUNT FOR BIS
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	60000	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f.08.10.2025

IS 15450 (2022)

Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450

DN 12 TO DN75

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MATERIALS)	-	5200	10% DISCOUNT FOR BIS
6(PRESSURE RATING)	-	0	10% DISCOUNT FOR BIS
7(NOMINAL DIAMETERS)	-	500	10% DISCOUNT FOR BIS
8(COLOUR)	-	200	10% DISCOUNT FOR BIS
9(DIMENSIONS OF PIPE)	-	500	10% DISCOUNT FOR BIS
10(VISUAL APPEARANCE)	-	200	10% DISCOUNT FOR BIS
11.1(Density (Method of test as per Table 3))	-	1000	10% DISCOUNT FOR BIS
11.2(Melt Flow Rate (Method of test as per Table 3))	-	500	10% DISCOUNT FOR BIS
11.3(Overall Migration)	-	2500	10% DISCOUNT FOR BIS
11.4(Thermal Stability to Oxidation (Method of test as per Table 3))	-	1500	10% DISCOUNT FOR BIS
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3))	-	500	10% DISCOUNT FOR BIS
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3))	-	1000	10% DISCOUNT FOR BIS
11.7(Resistance to Weathering)	-	15000	10% DISCOUNT FOR BIS
11.8(Adhesion Test)	-	2500	10% DISCOUNT FOR BIS
11.9(Apparent Tensile Strength of Pipe)	-	1500	10% DISCOUNT FOR BIS
11.10(Minimum Burst Pressure)	-	2500	10% DISCOUNT FOR BIS
11.11(Hydraulic Characteristics)	-	3500	10% DISCOUNT FOR BIS
Table 3(Anti-oxidant (as per IS 2530))	-	1500	10% DISCOUNT FOR BIS
14(MARKING)	-	0	10% DISCOUNT FOR BIS
5.1(MATERIALS)	-	2500	10% DISCOUNT FOR BIS
5.2.1(MATERIALS)	-	3500	10% DISCOUNT FOR BIS
5.2.1.1(The other constituents)	-	1200	10% DISCOUNT FOR BIS
5.3.1(UV Stabilizer)	-	1500	10% DISCOUNT FOR BIS
5.3.2(UV Stabilizer)	-	1500	10% DISCOUNT FOR BIS
5.4(Aluminium)	-	2000	10% DISCOUNT FOR BIS
5.5(REWORK Material)	-	0	10% DISCOUNT FOR BIS
6(PRESSURE RATING)	-	0	10% DISCOUNT FOR BIS
7(NOMINAL DIAMETERS)	-	200	10% DISCOUNT FOR BIS
8(COLOUR)	-	0	10% DISCOUNT FOR BIS
9.1(DIMENSIONS OF PIPE)	-	200	10% DISCOUNT FOR BIS
9.2.1(Method of Measurements)	-	0	10% DISCOUNT FOR BIS
9.3(Length of Straight Pipe)	-	400	10% DISCOUNT FOR BIS
9.4(Coiling)	-	400	10% DISCOUNT FOR BIS
10(VISUAL APPEARANCE)	-	0	10% DISCOUNT FOR BIS
11.1(Density)	-	1000	10% DISCOUNT FOR BIS
11.3(Melt Flow Rate)	-	1000	10% DISCOUNT FOR BIS
11.3(Overall Migration)	-	2500	10% DISCOUNT FOR BIS
11.4(Thermal Stability to Oxidation)	-	1500	10% DISCOUNT FOR BIS
11.5(Carbon Black Content and Dispersion)	-	1500	10% DISCOUNT FOR BIS
11.6(Pigment Dispersion (For Coloured Pipes))	-	1500	10% DISCOUNT FOR BIS
11.7(Resistance to Weathering)	-	11000	10% DISCOUNT FOR BIS
11.8(Adhesion Test)	-	2500	10% DISCOUNT FOR BIS
11.9(Apparent Tensile Strength of Pipe)	-	2500	10% DISCOUNT FOR BIS
11.1(Minimum Burst Pressure)	-	3500	10% DISCOUNT FOR BIS
11.11.1(Short Term Hydrostatic Tests)	-	3500	10% DISCOUNT FOR BIS
11.11.12(Long Term Hydrostatic Test)	-	3500	10% DISCOUNT FOR BIS
12.1(Type Test)	-	4500	10% DISCOUNT FOR BIS
5(MATERIALS)	-	0	10% DISCOUNT FOR BIS
6(PRESSURE RATING)	-	0	10% DISCOUNT FOR BIS
7(NOMINAL DIAMETERS)	-	0	10% DISCOUNT FOR BIS
8(COLOUR)	-	0	10% DISCOUNT FOR BIS
9(DIMENSIONS OF PIPE)	-	0	10% DISCOUNT FOR BIS
10(VISUAL APPEARANCE)	-	0	10% DISCOUNT FOR BIS
11.1(Density (Method of test as per Table 3))	-	500	10% DISCOUNT FOR BIS
11.2(Melt Flow Rate (Method of test as per Table 3))	-	500	10% DISCOUNT FOR BIS
11.3(Overall Migration)	-	1500	10% DISCOUNT FOR BIS
11.4(Thermal Stability to Oxidation (Method of test as per Table 3))	-	2500	10% DISCOUNT FOR BIS
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3))	-	1500	10% DISCOUNT FOR BIS
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3))	-	2500	10% DISCOUNT FOR BIS
11.7(Resistance to Weathering)	-	15000	10% DISCOUNT FOR BIS
11.8(Adhesion Test)	-	0	10% DISCOUNT FOR BIS
11.9(Apparent Tensile Strength of Pipe)	-	0	10% DISCOUNT FOR BIS
11.10(Minimum Burst Pressure)	-	0	10% DISCOUNT FOR BIS
11.11(Hydraulic Characteristics)	-	0	10% DISCOUNT FOR BIS
Table 3(Anti-oxidant (as per IS 2530))	-	0	10% DISCOUNT FOR BIS
14(MARKING)	-	0	10% DISCOUNT FOR BIS
5.1(MATERIALS)	-	0	10% DISCOUNT FOR BIS
5.2.1(MATERIALS)	-	0	10% DISCOUNT FOR BIS
5.2.1.1(The other constituents)	-	0	10% DISCOUNT FOR BIS
5.3.1(UV Stabilizer)	-	0	10% DISCOUNT FOR BIS
5.3.2(UV Stabilizer)	-	0	10% DISCOUNT FOR BIS
5.4(Aluminium)	-	0	-
5.5(REWORK Material)	-	0	-
6(PRESSURE RATING)	-	0	-
7(NOMINAL DIAMETERS)	-	0	-
8(COLOUR)	-	0	-
9.1(DIMENSIONS OF PIPE)	-	0	-
9.2.1(Method of Measurements)	-	0	-
9.3(Length of Straight Pipe)	-	0	-
9.4(Coiling)	-	0	-
10(VISUAL APPEARANCE)	-	0	-
11.1(Density)	-	0	-
11.3(Melt Flow Rate)	-	0	-
11.3(Overall Migration)	-	0	-
11.4(Thermal Stability to Oxidation)	-	0	-
11.5(Carbon Black Content and Dispersion)	-	0	-
11.6(Pigment Dispersion (For Coloured Pipes))	-	0	-
11.7(Resistance to Weathering)	-	0	-
11.8(Adhesion Test)	-	0	-
11.9(Apparent Tensile Strength of Pipe)	-	0	-
11.1(Minimum Burst Pressure)	-	0	-
11.11.1(Short Term Hydrostatic Tests)	-	0	-
11.11.12(Long Term Hydrostatic Test)	-	0	-
12.1(Type Test)	-	0	-
5(MATERIALS)	-	-	-
6(PRESSURE RATING)	-	-	-
7(NOMINAL DIAMETERS)	-	-	-
8(COLOUR)	-	-	-
9(DIMENSIONS OF PIPE)	-	-	-
10(VISUAL APPEARANCE)	-	-	-
11.1(Density (Method of test as per Table 3))	-	-	-
11.2(Melt Flow Rate (Method of test as per Table 3))	-	-	-
11.3(Overall Migration)	-	-	-
11.4(Thermal Stability to Oxidation (Method of test as per Table 3))	-	-	-
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3))	-	-	-
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3))	-	-	-
11.7(Resistance to Weathering)	-	-	-
11.8(Adhesion Test)	-	-	-
11.9(Apparent Tensile Strength of Pipe)	-	-	-
11.10(Minimum Burst Pressure)	-	-	-
11.11(Hydraulic Characteristics)	-	-	-
Table 3(Anti-oxidant (as per IS 2530))	-	-	-
14(MARKING)	-	-	-
5.1(MATERIALS)	-	-	-
5.2.1(MATERIALS)	-	-	-
5.2.1.1(The other constituents)	-	-	-
5.3.1(UV Stabilizer)	-	-	-
5.3.2(UV Stabilizer)	-	-	-
5.4(Aluminium)	-	-	-
5.5(REWORK Material)	-	-	-
6(PRESSURE RATING)	-	-	-
7(NOMINAL DIAMETERS)	-	-	-
8(COLOUR)	-	-	-
9.1(DIMENSIONS OF PIPE)	-	-	-
9.2.1(Method of Measurements)	-	-	-
9.3(Length of Straight Pipe)	-	-	-
9.4(Coiling)	-	-	-
10(VISUAL APPEARANCE)	-	-	-
11.1(Density)	-	-	-
11.3(Melt Flow Rate)	-	-	-
11.3(Overall Migration)	-	-	-
11.4(Thermal Stability to Oxidation)	-	-	-
11.5(Carbon Black Content and Dispersion)	-	-	-
11.6(Pigment Dispersion (For Coloured Pipes))	-	-	-
11.7(Resistance to Weathering)	-	-	-
11.8(Adhesion Test)	-	-	-
11.9(Apparent Tensile Strength of Pipe)	-	-	-
11.1(Minimum Burst Pressure)	-	-	-
11.11.1(Short Term Hydrostatic Tests)	-	-	-
11.11.12(Long Term Hydrostatic Test)	-	-	-
12.1(Type Test)	-	-	-

24 Sep, 2027

-
Included w.e.f. 29.10.2025

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

RMS 35 TO 400, RDS DN100 TO 400, PMS DN200 TO DN400, PDS DN200 TO DN400, CS DN150 TO DN400, CM DN35 TO DN400 AND CD DN100 TO DN400

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1000	10% DISCOUNT FOR BIS
9.5(Tensile Strength IS 12235(Part 13))	-	500	10% DISCOUNT FOR BIS
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1200	10% DISCOUNT FOR BIS
9.3(Density IS 12235 (Part 14))	-	500	10% DISCOUNT FOR BIS
9.2(Internal Diameter)	-	200	10% DISCOUNT FOR BIS
9.1( Visual Appearance)	-	0	10% DISCOUNT FOR BIS
9.1(Visual Appearance)	-	0	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1500	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	10% DISCOUNT FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	200	10% DISCOUNT FOR BIS
8.4(Sealing rings - Hardness)	-	500	10% DISCOUNT FOR BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	10% DISCOUNT FOR BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1000	10% DISCOUNT FOR BIS
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	10% DISCOUNT FOR BIS
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500	10% DISCOUNT FOR BIS
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	500	10% DISCOUNT FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500	10% DISCOUNT FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500	10% DISCOUNT FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	10% DISCOUNT FOR BIS
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500	10% DISCOUNT FOR BIS
7.3.2(Rib height)	-	500	10% DISCOUNT FOR BIS
7.3.1(No.of Ribs)	-	500	10% DISCOUNT FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500	10% DISCOUNT FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500	10% DISCOUNT FOR BIS
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	500	10% DISCOUNT FOR BIS
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	500	10% DISCOUNT FOR BIS
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	500	10% DISCOUNT FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500	10% DISCOUNT FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	500	10% DISCOUNT FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	500	10% DISCOUNT FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500	10% DISCOUNT FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500	10% DISCOUNT FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500	10% DISCOUNT FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500	10% DISCOUNT FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	500	10% DISCOUNT FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	500	10% DISCOUNT FOR BIS
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	500	10% DISCOUNT FOR BIS
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	500	10% DISCOUNT FOR BIS
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	500	10% DISCOUNT FOR BIS
5(COLOUR)	-	200	10% DISCOUNT FOR BIS
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	500	10% DISCOUNT FOR BIS
8.4(Width b)	-	200	10% DISCOUNT FOR BIS
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	200	10% DISCOUNT FOR BIS
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	200	10% DISCOUNT FOR BIS
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	200	10% DISCOUNT FOR BIS
5.0(Colour of Pipes)	-	500	10% DISCOUNT FOR BIS
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	2500	10% DISCOUNT FOR BIS
4.1.2(K-Value as per IS-4669)	-	1500	10% DISCOUNT FOR BIS
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	5000	10% DISCOUNT FOR BIS
7.1(Screen Pipes)	-	0	10% DISCOUNT FOR BIS
11(Marking)	-	0	10% DISCOUNT FOR BIS
5.1(Materials)	-	3500	10% DISCOUNT FOR BIS
8(Packing)	-	0	10% DISCOUNT FOR BIS
4.1.3(Cross Chain Length)	-	0	10% DISCOUNT FOR BIS
7.2(Link Twisted (Cross chain))	-	0	10% DISCOUNT FOR BIS
7.3(The Basic chains)	-	0	10% DISCOUNT FOR BIS
7.9(Case Depth)	-	0	10% DISCOUNT FOR BIS
8(Marking)	-	0	10% DISCOUNT FOR BIS
Cl 9.7(Effect on Water Lead (first extraction))	-	3500	10% DISCOUNT FOR BIS
Cl 9.7(Effect on Water Lead (third extraction))	-	3500	10% DISCOUNT FOR BIS
Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	3500	10% DISCOUNT FOR BIS
Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3500	10% DISCOUNT FOR BIS
Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3500	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f.08.10.2025

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

DN16 TO 200MM (SDR11, SDR7.4, SDR6 AND SDR5)

132000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	10% DISCOUNT FOR BIS
Cl 7(Dimensions Of Pipes)	-	1000	10% DISCOUNT FOR BIS
Cl 8(Visual Appearance)	-	500	10% DISCOUNT FOR BIS
Cl 9.1(Hydraulic Characteristics)	-	10000	10% DISCOUNT FOR BIS
Cl 9.2(Fusion Compatibility)	-	15000	10% DISCOUNT FOR BIS
Cl 9.3(Reversion Test )	-	500	10% DISCOUNT FOR BIS
Cl 9.4 & Annex B(Impact Strength)	-	1500	10% DISCOUNT FOR BIS
Cl 9.5(Density)	-	1500	10% DISCOUNT FOR BIS
Cl 9.6(Melt Flow Rate)	-	1000	10% DISCOUNT FOR BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	1500	10% DISCOUNT FOR BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	1200	10% DISCOUNT FOR BIS
Cl 9.9(Opacity)	-	500	10% DISCOUNT FOR BIS
5(Colour)	-	300	10% DISCOUNT FOR BIS
Cl 4( Designation)	-	100	10% DISCOUNT FOR BIS
Cl 7(Dimensions Of Pipes)	-	1000	10% DISCOUNT FOR BIS
Cl 8(Visual Appearance)	-	500	10% DISCOUNT FOR BIS
Cl 9.1(Hydraulic Characteristics)	-	25000	10% DISCOUNT FOR BIS
Cl 9.2(Fusion Compatibility)	-	31000	10% DISCOUNT FOR BIS
Cl 9.3(Reversion Test )	-	1200	10% DISCOUNT FOR BIS
Cl 9.4 & Annex B(Impact Strength)	-	1500	10% DISCOUNT FOR BIS
Cl 9.5(Density)	-	1500	10% DISCOUNT FOR BIS
Cl 9.6(Melt Flow Rate)	-	1000	10% DISCOUNT FOR BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	1500	10% DISCOUNT FOR BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	1200	10% DISCOUNT FOR BIS
Cl 9.9(Opacity)	-	1200	10% DISCOUNT FOR BIS
5(Colour)	-	200	10% DISCOUNT FOR BIS
Cl 4( Designation)	-	0	10% DISCOUNT FOR BIS
Cl 7(Dimensions Of Pipes)	-	0	10% DISCOUNT FOR BIS
Cl 8(Visual Appearance)	-	0	10% DISCOUNT FOR BIS
Cl 9.1(Hydraulic Characteristics)	-	0	10% DISCOUNT FOR BIS
Cl 9.2(Fusion Compatibility)	-	0	10% DISCOUNT FOR BIS
Cl 9.3(Reversion Test )	-	0	10% DISCOUNT FOR BIS
Cl 9.4 & Annex B(Impact Strength)	-	0	10% DISCOUNT FOR BIS
Cl 9.5(Density)	-	0	10% DISCOUNT FOR BIS
Cl 9.6(Melt Flow Rate)	-	0	10% DISCOUNT FOR BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	0	10% DISCOUNT FOR BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	0	10% DISCOUNT FOR BIS
Cl 9.9(Opacity)	-	0	10% DISCOUNT FOR BIS
5(Colour)	-	0	10% DISCOUNT FOR BIS
Cl 4( Designation)	-	0	10% DISCOUNT FOR BIS
Cl 7(Dimensions Of Pipes)	-	0	10% DISCOUNT FOR BIS
Cl 8(Visual Appearance)	-	0	10% DISCOUNT FOR BIS
Cl 9.1(Hydraulic Characteristics)	-	0	10% DISCOUNT FOR BIS
Cl 9.2(Fusion Compatibility)	-	0	10% DISCOUNT FOR BIS
Cl 9.3(Reversion Test )	-	0	10% DISCOUNT FOR BIS
Cl 9.4 & Annex B(Impact Strength)	-	0	10% DISCOUNT FOR BIS
Cl 9.5(Density)	-	0	10% DISCOUNT FOR BIS
Cl 9.6(Melt Flow Rate)	-	0	10% DISCOUNT FOR BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	0	10% DISCOUNT FOR BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	0	10% DISCOUNT FOR BIS
Cl 9.9(Opacity)	-	0	10% DISCOUNT FOR BIS
5(Colour)	-	0	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f 12.11.2025

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

NOMINAL DIAMETER (75MM TO 500MM) SN2, SN4, SN8 AND SN16

98000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	2500	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, i)(Base Density)	-	500	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	500	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2500	10% DISCOUNT FOR BIS
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1000	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	1500	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	5500	10% DISCOUNT FOR BIS
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	2500	10% DISCOUNT FOR BIS
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500	10% DISCOUNT FOR BIS
6.3.2(Length of Pipe)	-	500	10% DISCOUNT FOR BIS
8.1.1 Table-10 (iv)(Creep ratio)	-	15500	10% DISCOUNT FOR BIS
6.3.3(Out Side Diameter)	-	1000	10% DISCOUNT FOR BIS
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1500	10% DISCOUNT FOR BIS
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	500	10% DISCOUNT FOR BIS
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	3500	10% DISCOUNT FOR BIS
6.3.5.2(Wall Thickness(e4 min))	-	500	010% DISCOUNT FOR BIS
9 Table 12 (ii)(Water tightness)	-	3500	10% DISCOUNT FOR BIS
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	10% DISCOUNT FOR BIS
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	12000	10% DISCOUNT FOR BIS
7.1(Appearance)	-	0	10% DISCOUNT FOR BIS
7.1.1(Color of Finished Pipes)	-	0	10% DISCOUNT FOR BIS
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1000	10% DISCOUNT FOR BIS
8.1.1 Table-10 (i)(Ring Stiffness)	-	1000	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, i)(Base Density)	-	1000	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1200	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	0	10% DISCOUNT FOR BIS
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	0	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	0	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	0	10% DISCOUNT FOR BIS
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	0	10% DISCOUNT FOR BIS
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	0	10% DISCOUNT FOR BIS
6.3.2(Length of Pipe)	-	0	10% DISCOUNT FOR BIS
8.1.1 Table-10 (iv)(Creep ratio)	-	0	10% DISCOUNT FOR BIS
6.3.3(Out Side Diameter)	-	0	10% DISCOUNT FOR BIS
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	10% DISCOUNT FOR BIS
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	10% DISCOUNT FOR BIS
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	0	10% DISCOUNT FOR BIS
6.3.5.2(Wall Thickness(e4 min))	-	0	10% DISCOUNT FOR BIS
9 Table 12 (ii)(Water tightness)	-	0	10% DISCOUNT FOR BIS
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	10% DISCOUNT FOR BIS
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	0	10% DISCOUNT FOR BIS
7.1(Appearance)	-	0	10% DISCOUNT FOR BIS
7.1.1(Color of Finished Pipes)	-	0	10% DISCOUNT FOR BIS
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	0	10% DISCOUNT FOR BIS
8.1.1 Table-10 (i)(Ring Stiffness)	-	0	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, i)(Base Density)	-	0	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	0	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	0	10% DISCOUNT FOR BIS
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	0	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	0	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	0	10% DISCOUNT FOR BIS
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	0	10% DISCOUNT FOR BIS
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	0	10% DISCOUNT FOR BIS
6.3.2(Length of Pipe)	-	0	10% DISCOUNT FOR BIS
8.1.1 Table-10 (iv)(Creep ratio)	-	0	10% DISCOUNT FOR BIS
6.3.3(Out Side Diameter)	-	0	10% DISCOUNT FOR BIS
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	10% DISCOUNT FOR BIS
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	10% DISCOUNT FOR BIS
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	0	10% DISCOUNT FOR BIS
6.3.5.2(Wall Thickness(e4 min))	-	0	10% DISCOUNT FOR BIS
9 Table 12 (ii)(Water tightness)	-	0	10% DISCOUNT FOR BIS
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	10% DISCOUNT FOR BIS
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	0	10% DISCOUNT FOR BIS
7.1(Appearance)	-	0	10% DISCOUNT FOR BIS
7.1.1(Color of Finished Pipes)	-	0	10% DISCOUNT FOR BIS
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	0	10% DISCOUNT FOR BIS

24 Sep, 2027

-
Included w.e.f. 29.10.2025

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

99000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.0(Physical characteristics for pipes and fittings Appearance)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2(Physical characteristics for pipes and fittings )	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.3(Physical characteristics for pipes and fittings )	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.1(Mechanical Characteristics of Pipes General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.1(Mechanical Characteristics of Pipes General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2.1(Mechanical Characteristics of Fittings General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2.1(Mechanical Characteristics of Fittings General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2.2(Mechanical Characteristics of Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3(Joints)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 (Table 12)(Performance Requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 (Table 12)(Performance Requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 (Table 12)(Performance Requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Marking General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.0(Composition of the material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.1(Composition of the material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.3(Composition of the material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.4(Composition of the material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.0(DESIGNATION OF WALL CONSTRUCTIONS AND EXAMPLES OF TYPICAL JOINTING METHODS )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1(Wall Construction Designated as Type A)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.2(Deswignation)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3(Dimensions of pipes and fittings)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.1 Table 2(Mean outside diameter)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.2 Table 3(Wall thickness)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.3 Fig 2(Length of pipe)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4.1(Wall thickness of sockets)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4.2(Fabricated fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4.3(Rotational moulded fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4.4(Type of fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.0(Physical characteristics of pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2(Colour )	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.3(Vicat softening temperature of pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.4(Resistance to Dichloromethane)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.5(longitudinal reversion)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.0(Physical characteristics of fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1(Appearance and colour)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2(Vicat softening temperature of fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3(Effect of Heating (Stress Relief Test))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.0(Mechanical characteristics ofpipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.1(Ring stiffness)	-	1100	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2(Resistance to external blows at o C)	-	1100	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.3(Ring flexibility)	-	1100	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.4(Creep ratio)	-	26300	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.0(Mechanical Characteristics of fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.0(Joints)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Elastomeric Sealing Rings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2(Solvent cement)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.0(PERFORMANCE REQUIREMENTS)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1(Elastomeric Sealing Ring Joints)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	39000	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.2(Solvent cement joints)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.2.1(Tightness of Solvent cemented Ring Joints )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2(Physical characteristics for pipes and fittings )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.3(Physical characteristics for pipes and fittings )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.1(Mechanical Characteristics of Pipes General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.1(Mechanical Characteristics of Pipes General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2.1(Mechanical Characteristics of Fittings General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2.1(Mechanical Characteristics of Fittings General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2.2(Mechanical Characteristics of Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3(Joints)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 (Table 12)(Performance Requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 (Table 12)(Performance Requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 (Table 12)(Performance Requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Marking General)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.1(Minimum Required Marking Pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2.2(Minimum Required Marking Fittings)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(C max)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1(Colour of finished pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.6(7.6 Effect on Water)	-	4000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.4(Effect on Water)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(C max)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1(Colour of finished pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.6(7.6 Effect on Water)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.4(Effect on Water)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.3.4 Table 4 & 5(C max)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1.1(Colour of finished pipes)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.6(7.6 Effect on Water)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.4(Effect on Water)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges

24 Sep, 2027

-
Included w.e.f. 01.09.2025

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.3(Carbon Dispersion Test)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	3000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.3(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.6(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
6.1(Finish)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.1.1(Resistance to Deformation)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.1.2(Resistance to Deformation)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.2(Resistance to Impact)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.3(Test for Top Load Resistance)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.4(Tensile Strength)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.5(Flexural Modulus)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.6(overall Migration)	-	3500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
9.2.1(Man-Hole and Hand-Hole Lids)	-	4000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
9.2(Man-Hole and Hand-Hole Lids)	-	4000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
9.1(Man-Hole and Hand-Hole Lids)	-	4000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
9.1(Lid Thickness)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.3(Test for Top Load Resistance)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
6.1(Finish)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.4(Wall Thickness above effective height)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2 (7)(Minimum Wall Thickness)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.1(Density)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.2(MFI)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.6(overall Migration)	-	3500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.1(MATERIALS)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.2(MFR)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.1(Density)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.4(Wall Thickness)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
10(MARKING)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
Cl-7.6(Overall Migration)	-	3500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.3(Carbon Black Content )	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.3(Carbon Dispersion Test)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5(Types and Features )	-	3500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.3(Types and Features )	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.6(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
6.1(Finish)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.1.1(Resistance to Deformation)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.1.2(Resistance to Deformation)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.2(Resistance to Impact)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.3(Test for Top Load Resistance)	-	3500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.4(Tensile Strength)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.5(Flexural Modulus)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.6(overall Migration)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.1(Density)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.2(MFI)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.6(overall Migration)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.1(MATERIALS)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.2(MFR)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.1(Density)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.4(Wall Thickness)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
10(MARKING)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
Cl-7.6(Overall Migration)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.3(Carbon Black Content )	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.3(Carbon Dispersion Test)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.3(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.6(Types and Features )	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
6.1(Finish)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.1.1(Resistance to Deformation)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.1.2(Resistance to Deformation)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.2(Resistance to Impact)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.3(Test for Top Load Resistance)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.4(Tensile Strength)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.5(Flexural Modulus)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.6(overall Migration)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.1(Density)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.2(MFI)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
7.6(overall Migration)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.1(MATERIALS)	-	0	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.2(MFR)	-	1000	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
4.2.1(Density)	-	1500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
5.4(Wall Thickness)	-	500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
10(MARKING)	-	200	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000
Cl-7.6(Overall Migration)	-	2500	10% Discount to BIS and testing charges.500 TO 1000 Liters full testing @25000,1500 TO 5000 Liters full testing @35000

24 Sep, 2027

-
Included w.e.f. 01.09.2025

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.3 (Length of Pipe)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(iv) Length of spigot, l1)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4.1 (e3min=0.75e)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(Physical characteristics )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance:- )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance:- )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2(Colour )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(MECHANICAL CHARACTERISTICS)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10(Performance requirements)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
'7.5 (amdt.7)(Effect on Water (Type test))	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.3(Qualitative)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
12(Marking)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2 IS 14182(b) Solvent cement)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.3 (Length of Pipe)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(iv) Length of spigot, l1)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4.1 (e3min=0.75e)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	250	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(Physical characteristics )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance:- )	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance:- )	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2(Colour )	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(MECHANICAL CHARACTERISTICS)	-	5500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10(Performance requirements)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
'7.5 (amdt.7)(Effect on Water (Type test))	-	3500	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.3(Qualitative)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12(Marking)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2 IS 14182(b) Solvent cement)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.3 (Length of Pipe)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(iv) Length of spigot, l1)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4.1 (e3min=0.75e)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(Physical characteristics )	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance:- )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.1(Appearance:- )	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.2(Colour )	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(MECHANICAL CHARACTERISTICS)	-	10000	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	5500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10(Performance requirements)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
'7.5 (amdt.7)(Effect on Water (Type test))	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
5.3(Qualitative)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
12(Marking)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2 IS 14182(b) Solvent cement)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges

24 Sep, 2027

-
Included w.e.f. 01.09.2025

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-5.2(Emitter Ends)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-5.3(Materials)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-6.1(Test Specimens)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-6.2.1(polyethylene pipe)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-6.2.2("grease or chemicals ")	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-6.2.3(water temperature)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-6.3(Accuracy or Measuring Devices)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-7.1(Construction and Workmanship)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-7.2(Flow Paths in Emitter)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-7.4(Emitter Pull-Out)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-7.4.1(In-Line Emitters)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-7.4.2(On-Line Emitters)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-8.1.1(Uniformity of Emission Rate)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-8.1.3(Determination of Emitter Exponent)	-	8000	10% Discount to BIS for others 1.5 times of mentioned testing charges
Cl-9(Marking)	-	100	10% Discount to BIS for others 1.5 times of mentioned testing charges

24 Sep, 2027

-
Included w.e.f 16.07.2025

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

ALL

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.3(Rework Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5(COLOUR)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1(The nominal outside diameter)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.2(Bends, tees, pipe ends and end caps designation)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(WELD LENGTH)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(VISUAL APPEARANCE)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.1(DIMENSIONS OF FITTINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2(DIMENSIONS OF FITTINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.3(DIMENSIONS OF FITTINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1(Length of Pipe for Welding Test)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2(Sandwich Flange Hydraulic Testing)	-	4500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2(Carbon Black Content and Dispersion)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.3(Melt Flow Rate)	-	1100	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.4(Density)	-	700	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.5(Oxidation Induction Time)	-	2200	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.6(Overall Migration)	-	2200	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Type Tests)	-	5300	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2(Acceptance Tests)	-	6100	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.3(Rework Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5(COLOUR)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1(The nominal outside diameter)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.2(Bends, tees, pipe ends and end caps designation)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(WELD LENGTH)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(VISUAL APPEARANCE)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.1(DIMENSIONS OF FITTINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2(DIMENSIONS OF FITTINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.3(DIMENSIONS OF FITTINGS)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1(Length of Pipe for Welding Test)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2(Sandwich Flange Hydraulic Testing)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2(Carbon Black Content and Dispersion)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.3(Melt Flow Rate)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.4(Density)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.5(Oxidation Induction Time)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.6(Overall Migration)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Type Tests)	-	5500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2(Acceptance Tests)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.3(Rework Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5(COLOUR)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1(The nominal outside diameter)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.2(Bends, tees, pipe ends and end caps designation)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(WELD LENGTH)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(VISUAL APPEARANCE)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.1(DIMENSIONS OF FITTINGS)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2(DIMENSIONS OF FITTINGS)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.3(DIMENSIONS OF FITTINGS)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1(Length of Pipe for Welding Test)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2(Sandwich Flange Hydraulic Testing)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2(Carbon Black Content and Dispersion)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.3(Melt Flow Rate)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.4(Density)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.5(Oxidation Induction Time)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.6(Overall Migration)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Type Tests)	-	5500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2(Acceptance Tests)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.1(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.3(Rework Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
5(COLOUR)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.1(The nominal outside diameter)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
6.2(Bends, tees, pipe ends and end caps designation)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
7(WELD LENGTH)	-	500	10% Discount to BIS for others 1.5 times of mentioned testing charges
8(VISUAL APPEARANCE)	-	200	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.1(DIMENSIONS OF FITTINGS)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.2(DIMENSIONS OF FITTINGS)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
9.3(DIMENSIONS OF FITTINGS)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.1(Length of Pipe for Welding Test)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.1.2(Sandwich Flange Hydraulic Testing)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.2(Carbon Black Content and Dispersion)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.3(Melt Flow Rate)	-	2000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.4(Density)	-	1000	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.5(Oxidation Induction Time)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
10.6(Overall Migration)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.1(Type Tests)	-	2500	10% Discount to BIS for others 1.5 times of mentioned testing charges
11.2(Acceptance Tests)	-	1500	10% Discount to BIS for others 1.5 times of mentioned testing charges
4.2(Material)	-	0	10% Discount to BIS for others 1.5 times of mentioned testing charges

24 Sep, 2027

-
Included w.e.f. 01.09.2025

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Drop Impact Test)	-	1000	-
4.1(Raw Meterial)	-	2500	-
4.2("Fabric a) Width of Tape")	-	200	-
4.2("Fabric b) Linear Density")	-	500	-
4.2("Fabric c) Mesh")	-	200	-
4.2("Fabric c) Mesh")	-	500	-
4.2("Fabric d) Unlaminated Fabric Mass")	-	200	-
4.3(Sacks)	-	200	-
4.4.1(Loose Liner)	-	500	-
4.4.1(Thickness of Linear)	-	200	-
4.4.2(Visual Observation)	-	0	-
4.4.3(Bottom Seam of Loose Liner)	-	200	-
4.5(Mass of The Lamination)	-	200	-
4.5(Laminated Fabric)	-	200	-
4.5(Lamination Over Hang of the fabric after trimming)	-	200	-
4.6.1(Distance between the Two Row of Stitches)	-	200	-
4.6.1(Distance of outer stitch from the edge of the bag)	-	200	-
4.6.1(Depth of the Stitch( Double fold))	-	200	-
4.6.1(No.of Stitches/dm)	-	200	-
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	1000	-
4.6.2(Breaking Load for UV Stabilized sack)	-	1000	-
4.7(Mouth of the Sack)	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	200	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	200	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	200	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	200	-
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	1000	-
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1000	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	500	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	1000	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	500	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	0	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	0	-
Cl. No.5.2(Visual Observation)	-	200	-
Cl. No.5.3(Mass of Bale)	-	0	-
Cl. No.5.4(Breaking Strength of Fabric)	-	1000	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	500	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	1000	-
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	1000	-
Cl. No.5.6(Drop Impact testing of filled sack)	-	0	-
Cl. No.5.7(UV Resistance)	-	11500	-
Cl. No.6.1(Printing on Sacks)	-	0	-
Cl. No.6.2.(Packaging)	-	0	-
Cl. No.6.3.(Marking on the Bale)	-	0	-
Cl. No.6.4.(BIS Certification Marking)	-	0	-
Cl. No.6.5.(Storage)	-	0	-

24 Sep, 2027

-
Included w.e.f.19.12.2024

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	500	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	1000	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1000	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
3.2(Unlaminated Fabric Mass )	-	500	-
3.3.1(Bottom seam (IS 10789))	-	500	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	500	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	500	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	1000	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11200	-
4.2 and Table 1 x(Ash content )	-	1000	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	500	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	1000	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
3.2(Unlaminated Fabric Mass )	-	500	-
3.3.1(Bottom seam (IS 10789))	-	500	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500	-
4.2 and Table 1 ii(Dimensions )	-	1000	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1000	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	500	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.2 and Table 1 x(Ash content )	-	1000	-
3.1(Material Identification)	-	2000	-
3.1(Overall Migration)	-	1000	-
3.2(Density)	-	1000	-
3.2(MFI)	-	1000	-
Cl 3.2 (Mesh size)(Mesh size)	-	0	-
Cl 3.2 (Weight in g/m2) (Amendment 3)(Weight in g/m2)	-	0	-
3.3.2(Mouth)	-	0	-

24 Sep, 2027

-
Included w.e.f.19.12.2024

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

16 mm to 315mm Nominal Size

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	500	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	2500	-
Cl. 6.2(Opacity- Appendix B)	-	2000	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	2500	-
6.1.1(VCM Content Test)	-	10000	-
3(Size of Fitting -)	-	500	-
4(Minimum thickness)	-	200	-
5(Socket dimensions)	-	200	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	4000	-
6.4(Short-Term Hydraulic Test)	-	0	-
7.2(Production Routine Tests)	-	0	-

24 Sep, 2027

-
Included w.e.f.19.12.2024

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

40MM TO 160MM

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	250	-
3(Type of Fitting)	-	500	-
4(Size Designation)	-	500	-
5(Colour of fittings)	-	500	-
7.1,Table 1(Wall thickness)	-	500	-
7.2 ,Table 2&3(Socket Dimensions)	-	500	-
7.3(Dimensions of waste trap(Nahani Trap)	-	500	-
8(Sealing Rings)	-	1000	-
10(Workmanship)	-	500	-
11(Design requirements)	-	500	-
11.1(Solvent cement type or Rubber ring type)	-	500	-
11.2(Socket and spigot configeration)	-	500	-
11.4,Table 5(Vent cowl)	-	500	-
11.5,Table 6(Pipe Clips)	-	500	-
12(Physical test requirements)	-	500	-
12.1(Visual appearance)	-	500	-
12.2(Stress relief test)	-	1500	-
12.3(Vicat softening tempewrature)	-	1500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	2500	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
16(Mechanical Properties)	-	1500	-
16.1(Impact test)	-	1500	-
17(Watet tightness of joint)	-	1500	-
12.4(Effect on water test)	-	4000	-
7.4(Chamfer)	-	500	-
11.3(Access Openings)	-	0	-
Table 4(Dimension of Access Openings)	-	1000	-

24 Sep, 2027

-
included w.e.f.19.12.2024

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

40MM TO UP TO AND INCLUDING 315MM

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1500	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	500	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1500	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1500	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2500	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	-
8.6(Effect on Water Test)	-	4000	-
14(Marking)	-	500	-

24 Sep, 2027

-
Included w.e.f.19.12.2024

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

UP TO 500MM OUTSIDE DIAMETER

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	250	-
10.1(Surface Finish)	-	250	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	250	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	250	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	12000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	3500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	3500	-
11.2(Resistance to External Blows at 0°C)	-	2500	-
10.3(Effect on Water Test)	-	4000	-
6.1.2(PVC Resin)	-	2500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	250	-
6.1.1(VCM Content)	-	2500	-
7.2.1.2b(Maximum inner diameter of groove)	-	250	-
13.1(Marking)	-	0	-
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	250	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	-
8(SEALING RINGS)	-	250	-
9.1(PIPE ENDS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	12000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	12000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	3500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	3500	-
11.2(Resistance to External Blows at 0°C)	-	2500	-
10.3(Effect on Water Test)	-	4000	-
6.1.2(PVC Resin)	-	2500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	250	-
7.1.4(Length)	-	250	-
6.1.1(VCM Content)	-	2500	-
7.2.1.2b(Maximum inner diameter of groove)	-	250	-
13.1(Marking)	-	0	-

24 Sep, 2027

-
Included w.e.f.19.12.2024

IS 8360 (2022)

Fabricated Polyethylene Fittings for Water Supply ï¿½ Specification (First Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Materials)	-	4500	-
5(Sizes and Designation of Fittings)	-	300	-
6(Visual Appearance)	-	300	-
7(Dimensions of Fittings)	-	500	-
8.1(Hydraulic Characteristics)	-	4500	-
8.2(Tensile Strength for Butt-Fusion)	-	2000	-
9.1.2(Type Tests for Fittings Sizes)	-	4500	-
9.2.2(Lot)	-	200	-
9.2.3(Visual and Dimensional Requirements for Fabricated PE Fittings)	-	200	-
9.2.4.1(Fittings sizes up to 560 mm)	-	500	-
9.2.4.2(Fittings sizes including and above 630 mm)	-	500	-
10(Marking)	-	200	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

50450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	22850	-
7.3( Opacity)	-	600	-
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	-
8.2 table-9( Pipe Ends)	-	250	-
5 / 5.1(MATERIALS )	-	2000	-
5.3(VCM Content)	-	0	-
5.4( K-Value)	-	1100	-
5.6 / 5.6.1( Material Classification, table -1)	-	250	-
6.0(CLASSIFICATION OF PIPES, table-2)	-	250	-
7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance)	-	250	-
7.2( Colour)	-	250	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	-
8.1.2, table 4 to 7(Wall Thickness)	-	250	-
8.1.3 (Length, meter)	-	250	-
8.2 table-9(Dimensions of Integral Socket)	-	250	-
9.3 table-12( Ring Stiffness)	-	1400	-
9.4, annexure-E( Orientation Factor)	-	900	-
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	6200	-
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	1000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	1100	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	1000	-
12(a)( ELASTOMERIC SEALS)	-	1050	-
12(b)( ELASTOMERIC SEALS)	-	350	-
Cl.10, Table 10/1(Vicat Softening Temp (C))	-	1100	-
Cl.10, Table 10/2(Effect on Water)	-	3000	-
Cl.10, Table 10/3(Resistant to di-chloromethane (Degree of gelation))	-	1000	-
Cl.10, Table 10/4(Alternate Test (Tensile test))	-	1000	-

24 Sep, 2027

-
-

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	1000	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1500	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1500	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1500	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1500	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	200	-
6.3(General)	-	200	-
6.3(General)	-	200	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1500	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	500	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	500	-
8.3.3(Flow Paths in Emitting Unit)	-	1000	-
8.3.4(Spacing ofEmitter Units)	-	200	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	4000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	4000	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1200	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2500	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2500	-
8.8(Determination of Emitting Unit Exponent)	-	3500	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	0	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	500	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	1000	-
4.2(Carbon black content)	-	1500	-
4.2(Carbon black dispersion)	-	1000	-
5.1(Materials)	-	500	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	500	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	500	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	500	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	500	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	500	-
8.1.2(Unregulated Emitting Pipes)	-	250	-
8.1.3(Regulated Emitting Pipes)	-	250	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	5000	-
8.5(Resistance to Tension at Elevated Temperature)	-	5000	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	2000	-
8.7.1(Acceptance Test)	-	4000	-
8.7.2(Type Test)	-	4000	-
8.8(Determination of Emitting Unit Exponen)	-	3500	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	500	-
7.2(Flow path in emitters)	-	1000	-
7.3.1(Resistance to Hydrostatic pressure)	-	1000	-
7.3.2(Resistance to Hydrostatic pressure)	-	1000	-
7.3.3(Resistance to Hydrostatic pressure)	-	1000	-
7.4.1(Emitter Pull Out In-line emitters)	-	1000	-
7.4.2(Emitter Pull Out On-line emitters)	-	1500	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1500	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1500	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1500	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1000	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	-
8.3(Determination of Emitter Exponent)	-	1500	-
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	1500	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	2500	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	1000	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	300	-
Cl-6.0(Visual Appearance)	-	200	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	2000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	2000	-
Cl-7.2(Reversion Test)	-	1000	-
Cl-7.3(Tensile Test)	-	750	-
Cl-7.3.1(Test Piece)	-	200	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	2500	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	200	-
Cl-10.0(Sampling and criteria for conformity)	-	200	-
Cl-11(Marking)	-	200	-
3(Class of Pipe)	-	200	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	300	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	300	-
6(Visual Appearance)	-	200	-
7.1 & Table 2(Hydraulic Characteristics)	-	2500	-
7.1 & Table 2(Hydraulic Characteristics)	-	2000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Strength)	-	750	-
7.3(Elongation at Break)	-	750	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	2500	-
4.2(a)(Carbon Black Content-IS 2530)	-	1000	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1000	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

460000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	500	-
4.3(Nominal Diameter)	-	500	-
4.4(Colour)	-	300	-
5.1(Polyethylene compound)	-	4425	a) Density (conventional) Rs.500.00 Rs.625.00 (Specimen) (b) MFI Rs.1,100.00 Rs.0.00 (c) Thermal Stability to oxidation(OIT) Rs.2,200.00 Rs.0.00
5.3(Anti-oxidant)	-	1500	-
5.4(U-V stabilizer)	-	0	-
5.7(PE Compound Quality Evaluation)	-	400000	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	-
5.6(Resistance to Weathering)	-	36000	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	-
6.1(Out of Roundness (Ovality))	-	300	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	-
7(Finish)	-	300	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	4200	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4800	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	-
8.2(Reversion Test)	-	700	-
8.3(Density)	-	500	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	700	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1250	-
8.9(Resistance to Weathering)	-	36000	-
6.4(Length of Pipe)	-	300	-
8.4(Melt Flow Rate (MFR))	-	1100	-
8.5(Pigment Dispersion)	-	600	-
8.10(Slow Crack Growth Rate Test)	-	10800	-
8.11(Squeeze-off)	-	1300	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	500	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	-
5.1, 5.7 Table 2(iv) Volatile content)	-	700	-
5.1, 5.7 Table 2(v) Water content1))	-	700	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	500	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	5500	-
5.3(Anti-Oxidant)	-	0	-
5.4(U.V. Stabilizer)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	5000	-
5.6(ii) Hydraulic characteristics)	-	36000	-
5.6(iii) Thermal stability (Oxidation induction time))	-	36000	-
6(Dimensions of pipes)	-	500	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	20000	-
8.2(Reversion test)	-	700	-
8.3(Density)	-	1000	-
8.4(Melt Flow Rate)	-	1100	-
8.5(Pigment Dispersion)	-	700	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2500	-
8.7(Volatile Matter Content)	-	1500	-
8.9(Resistance to Weathering)	-	36000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	4500	-
8.10(Slow Crack Growth Rate Test)	-	5500	-
8.11(Squeeze-of)	-	6350	-
10(Marking)	-	300	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

95950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	5000	-
6.3(Compound Properties)	-	25000	-
6.3.1 Annex B(Chloride content)	-	5000	10% DISCOUNT FOR BIS
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	15000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	200	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	200	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	200	-
7.1.3 (Effective length)	-	250	-
8(Pipe Ends)	-	250	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	200	-
9.1(Visual Appearance)	-	200	-
9.1(Visual Appearance)	-	200	-
9.2 IS 12235 (Part 3)(Opacity)	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	800	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	800	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10(Mechanical Properties)	-	65000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	5000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	15000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	35000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	3000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1500	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	15000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	2500	-
6.3.3(Density)	-	500	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	300	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	300	-
6(Visual Appearance)	-	300	-
7.1(Hydraulic Characteristics - Quality test)	-	7000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	2000	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Test- i) Tensile Strength)	-	1000	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4500	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	2000	-
7.5(Density)	-	750	-
7.6(Melt Flow Rate)	-	1500	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	1000	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	1500	-
7.5(Density)	-	750	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	1000	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	2500	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	300	-
5.1 table -1(DIMENSIONS OF PIPES)	-	300	-
4.3(Anti-oxidant)	-	4500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1500	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	750	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	-
3(CLASSIFICATION OF PIPES)	-	1500	-
4.1(Quick Coupled Male and Female Couplers)	-	1000	-
4.1(Quick Coupled Male and Female Couplers)	-	1000	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1500	-
6.1.3(Weldability Test- b) Acceptance test)	-	1500	-
3(Quick Coupled pipes)	-	1000	-
3(QUICK COUPLED PIPES)	-	500	-
4(QUICK COUPLED FITTINGS)	-	1000	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1000	-
4.1 (b)(HDPE couplers —)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	300	-
4.1 .1.2.1(HDPE couplers)	-	1000	-
4.1 .1.2.2(HDPE couplers)	-	1000	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	-
6.1(Quick Coupled Pipes and Fittings)	-	500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	1500	-
6.1.2.2(Hydraulic Proof Test)	-	1500	-
6.1.2.2(Hydraulic Proof Test)	-	1500	-
6.1.3, 6.1.3.1(Weldability Test)	-	1500	-
6.1.3.1.1(Weldability Test)	-	1500	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	1500	-
Cl.4.1.3(Den sity Test)	-	750	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Water Content)	-	1500	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	300	-
Cl.5.1.l(Outside Diameter)	-	300	-
Cl.6.2.L(Wall Thickness)	-	300	-
Cl.6.2.4(Workmanship and Appearance)	-	300	-
Cl.6.2.6(Rubber Ring Hardness)	-	750	-
Cl.6.2.6(Ageing Test)	-	1000	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Elongation)	-	1500	-
Cl.7.1.4(Elongation)	-	1500	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.6(Corrected Density)	-	750	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.2(Cl.7.2.2)	-	1500	-
Cl.7.2.3(Weld ability Test)	-	1500	-
Cl.7.2.3(Weld ability Test)	-	1500	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	1500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	1500	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	1500	-
6.1(Water content)	-	2500	-
6.1(Tensile strength at Yield & Elongation at break)	-	2500	-
6.1(Carbon Black Content)	-	1000	-
6.1(Carbon Black Dispersion)	-	1000	-
6.2.1(Base Density x 2)	-	750	-
6.2.1(Melt Flow Index x 2)	-	1000	-
6.2.1(Thermal Stability (OIT) x 2)	-	2500	-
6.2.1(Volatile Matter x 2)	-	1000	-
6.2.1(Water content x 2)	-	1500	-
6.2.1(Carbon Black Content x 2)	-	1000	-
6.2.1(Carbon Black Dispersion x 2)	-	1000	-
6.2.1(Wall thickness of male & female coupler)	-	500	-
6.2.4(Workmanship and appearance (Visual))	-	300	-
6.2.5(Holding attachment for coupler parts)	-	2500	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	1500	-
6.2.6(Ageing Charges for rubber ring)	-	1500	-
7.1.1(Visual appearance of pipes)	-	300	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.1.3(Reversion)	-	1000	-
7.1.4(Tensile strength & elongation)	-	1500	-
7.1.5(Fusion Compatibility test)	-	4500	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.1.6(Corrected Density)	-	1000	-
7.1.6(Base Density)	-	1000	-
7.1.6(Carbon black Content)	-	1000	-
7.1.7(Melt Flow Rate (MFR))	-	1500	-
4.1.1 (Table-1)(Density)	-	1000	-
4.1.1 (Table-1)(Melt Flow Index)	-	1500	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2500	-
4.1.1 (Table-1)(Volatile Matter)	-	1500	-
4.1.1 (Table-1)(Water content)	-	1500	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	1000	-
4.1.4(Carbon Black Dispersion)	-	1000	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	750	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1000	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2500	-
4.1.3, Table 1,(iv)(Volatile matter)	-	1500	-
4.1.3, Table 1,(v)(Water content)	-	1500	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1500	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1000	-
4.1.4(The Carbon Content and Dispersion)	-	1000	-
4.1.5(Carbon Black Specification)	-	1000	-
4.1.6(Antioxidant)	-	2500	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	500	-
5.1, Table 1,(iii)(Base pipe )	-	300	-
5.1, Table 1,(iv)(PCN)	-	300	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	300	-
7.1.2(Hydraulic Performance Characteristic)	-	4500	-
7.1.3(Reversion Test)	-	1000	-
7.1.4(Tensile Test)	-	1500	-
7.1.5(Fusion Compatibility Test)	-	2500	-
7.1.6(Corrected Density)	-	1000	-
7.1.7(Melt flow rate)	-	1000	-
7.2.1(Leakage Test)	-	1500	-
7.2.2(Hydraulic Proof Test)	-	1500	-
7.2.3(Weldability Test)	-	1500	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	300	-
5.1.2(Squareness)	-	300	-
7.2.1(Leakage test 1hour / 27°C)	-	1500	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	500	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
8(Supply of pipe (Visual))	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

Bureau of Indian Standards

The National Standards Body of India

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

12, PRESTIGE GARDEN VISTAR, SIWAR MOD, ROAD NO. 5, RIICO INDUSTRIAL AREA BINDAYAKA, JAIPUR, Jaipur, Rajasthan, 302012

9785071246 info@ctltestinglaboratory.com

Scope List