BIS - LIMS (Laboratory Information Management System)

SGS INDIA PRIVATE LIMITED, BENGALURU

No 38/1 and 38/2, New BBMP, No.88/45/45, Beretena Agrahara Begur Hobli, Hosur Main Road, Bangalore-560100, Bengaluru, Bengaluru Urban, Karnataka, 560100

8095661144 rajesh.sp@sgs.com

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Moisture Resistance, IS 302-1)	-	0	-
15(Moisture Resistance, IS 302-1)	-	2500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.7(Abnormal Operation, IS 302-1)	-	0	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.1(Abnormal Operation, IS 302-1)	-	3000	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
20.104(Stability & Mechanical Hazards)	-	0	-
20.101(Stability & Mechanical Hazards)	-	0	-
20.102(Stability & Mechanical Hazards)	-	0	-
20.103(Stability & Mechanical Hazards)	-	0	-
20.105(Stability & Mechanical Hazards)	-	0	-
20.106(Stability & Mechanical Hazards)	-	0	-
20.107(Stability & Mechanical Hazards)	-	0	-
20.108(Stability & Mechanical Hazards)	-	0	-
20.109(Stability & Mechanical Hazards)	-	0	-
20.110(Stability & Mechanical Hazards)	-	0	-
20.111(Stability & Mechanical Hazards)	-	0	-
20.112(Stability & Mechanical Hazards)	-	0	-
20.113(Stability & Mechanical Hazards)	-	0	-
20.114(Stability & Mechanical Hazards)	-	0	-
20.115(Stability & Mechanical Hazards)	-	0	-
20.116(Stability & Mechanical Hazards)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	0	-
29(Clearances, Creepage distances and Solid Insulation)	-	0	-
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
14(Transient Over Voltages, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Moisture Resistance, IS 302-1)	-	0	-
15(Moisture Resistance, IS 302-1)	-	0	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.7(Abnormal Operation, IS 302-1)	-	0	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.1(Abnormal Operation, IS 302-1)	-	0	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
20.104(Stability & Mechanical Hazards)	-	0	-
20.101(Stability & Mechanical Hazards)	-	0	-
20.102(Stability & Mechanical Hazards)	-	0	-
20.103(Stability & Mechanical Hazards)	-	0	-
20.105(Stability & Mechanical Hazards)	-	0	-
20.106(Stability & Mechanical Hazards)	-	0	-
20.107(Stability & Mechanical Hazards)	-	0	-
20.108(Stability & Mechanical Hazards)	-	0	-
20.109(Stability & Mechanical Hazards)	-	0	-
20.110(Stability & Mechanical Hazards)	-	0	-
20.111(Stability & Mechanical Hazards)	-	0	-
20.112(Stability & Mechanical Hazards)	-	0	-
20.113(Stability & Mechanical Hazards)	-	0	-
20.114(Stability & Mechanical Hazards)	-	0	-
20.115(Stability & Mechanical Hazards)	-	0	-
20.116(Stability & Mechanical Hazards)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22(Construction, IS 302-1)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	0	-
24.2(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	5000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	0	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
19.11.4.1(Electrostatic discharges)	-	10000	-
19.11.4.2(Radiated fields)	-	10000	-
19.11.4.3(Fast transient bursts)	-	10000	-
19.11.4.4(Surge immunity test)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
19.11.4.7(Harmonics)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	2000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	4000	-
10(Power Input and Current, IS 302-1)	-	7000	-
11(Heating, IS 302-1)	-	7000	-
11(Heating, IS 302-1)	-	7000	-
11(Heating, IS 302-1)	-	7000	-
11(Heating, IS 302-1)	-	7000	-
11(Heating, IS 302-1)	-	7000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	3000	-
15.2(Moisture Resistance, IS 302-1)	-	3000	-
15(Moisture Resistance, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.1(Abnormal Operation, IS 302-1)	-	500	-
19.101(Abnormal Operation)	-	500	-
19.102(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.104(Stability & Mechanical Hazards)	-	500	-
20.101(Stability & Mechanical Hazards)	-	500	-
20.102(Stability & Mechanical Hazards)	-	500	-
20.103(Stability & Mechanical Hazards)	-	500	-
20.105(Stability & Mechanical Hazards)	-	500	-
20.106(Stability & Mechanical Hazards)	-	500	-
20.107(Stability & Mechanical Hazards)	-	500	-
20.108(Stability & Mechanical Hazards)	-	500	-
20.109(Stability & Mechanical Hazards)	-	500	-
20.110(Stability & Mechanical Hazards)	-	500	-
20.111(Stability & Mechanical Hazards)	-	500	-
20.112(Stability & Mechanical Hazards)	-	500	-
20.113(Stability & Mechanical Hazards)	-	500	-
20.114(Stability & Mechanical Hazards)	-	500	-
20.115(Stability & Mechanical Hazards)	-	500	-
20.116(Stability & Mechanical Hazards)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22(Construction, IS 302-1)	-	500	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	500	-
24.5(Components, IS 302-1)	-	500	-
24.6(Components, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	600	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	4000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	5000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	5000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	4000	-
31(Resistance of Rusting, IS 302-1)	-	4000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
19.11.4.1(Electrostatic discharges)	-	10000	-
19.11.4.2(Radiated fields)	-	10000	-
19.11.4.3(Fast transient bursts)	-	10000	-
19.11.4.4(Surge immunity test)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	10000	-
19.11.4.7(Harmonics)	-	10000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	2000	-

17 Nov, 2027

-
Included w.e.f-06.08.2026 "19.11.4.2 (Radiated fields) 19.11.4.7 (Harmonics) 32 (Radiation, Toxicity and similar Hazard IS 302-1)"

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

227000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	20000	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	2000	-
18(Endurance)	-	10000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
16(Leakage current and electric strength)	-	7000	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	7000	-
30.2(Glow Wire Test)	-	7000	-
30.1(Ball pressure test)	-	7000	-
29(clearance, creepage distances and solid insulation)	-	4000	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	-
24(Components)	-	4000	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	8000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
19(Abnormal Operation)	-	12000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	3000	-
16.2(Leakage Current (after Clause 15))	-	3000	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	15000	-
15.2(Spillage Test)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	7000	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	7000	-
13.3(Electric Strength at operating temperature)	-	7000	-
13.2(Leakage current at operating temperature)	-	7000	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	500	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	5000	-
10.1(Power input)	-	5000	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	10000	-
Annex D(Thermal motor protectors)	-	7000	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	10000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	7000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
32.1(Radiation Toxicity and Similar Hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24(Components)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-

17 Nov, 2027

-
Included w.e.f 29.10.2025 Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC), Cl 22.16 (Construction) , Cl 22.32 (Construction)

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	2000	10% Discount for the BIS
Cl-4.2(Energy source classifications)	-	2000	10% Discount for the BIS
Cl-4.3(Protection against energy sources)	-	2000	10% Discount for the BIS
Cl-4.4(Safeguards)	-	1000	10% Discount for the BIS
Cl-4.5(Explosion)	-	500	10% Discount for the BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	500	10% Discount for the BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount for the BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	10% Discount for the BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	10% Discount for the BIS
Cl-4.10(Components requirements)	-	1000	10% Discount for the BIS
Cl-5.1(General- Electrically-caused injury)	-	1000	10% Discount for the BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	3000	10% Discount for the BIS
Cl-5.3(Protection against electrical energy sources)	-	2000	10% Discount for the BIS
Cl-5.4(Insulation materials and requirements)	-	5000	10% Discount for the BIS
Cl-5.5(Components as safeguards)	-	5000	10% Discount for the BIS
Cl-5.6(Protective conductor)	-	1000	10% Discount for the BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	4000	10% Discount for the BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1200	10% Discount for the BIS
Cl-6.1(General- Electrically-caused fire)	-	500	10% Discount for the BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% Discount for the BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	10% Discount for the BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	3000	10% Discount for the BIS
Cl-6.5(Internal and external wiring)	-	2000	10% Discount for the BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	200	10% Discount for the BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.3(Ozone exposure)	-	200	10% Discount for the BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	200	10% Discount for the BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	200	10% Discount for the BIS
Cl-8.1(General- Mechanically-caused injury)	-	500	10% Discount for the BIS
Cl-8.2(Mechanical energy source classifications)	-	500	10% Discount for the BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	500	10% Discount for the BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	500	10% Discount for the BIS
Cl-8.5(Safeguards against moving parts)	-	3000	10% Discount for the BIS
Cl-8.6(Stability of equipment)	-	3000	10% Discount for the BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2500	10% Discount for the BIS
Cl-8.8(Handle strength)	-	1000	10% Discount for the BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount for the BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1500	10% Discount for the BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	10% Discount for the BIS
Cl-9.1(General-Thermal burn injury)	-	500	10% Discount for the BIS
Cl-9.2(Thermal energy source classifications)	-	3000	10% Discount for the BIS
Cl-9.3(Touch temperature limits)	-	4000	10% Discount for the BIS
Cl-9.4(Safeguards against thermal energy sources)	-	500	10% Discount for the BIS
Cl-9.5(Requirements for safeguards)	-	500	10% Discount for the BIS
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	10% Discount for the BIS
Annex B-2(Normal operating conditions)	-	4000	10% Discount for the BIS
Annex B-3(Simulated abnormal operating conditions)	-	4000	10% Discount for the BIS
Annex B-4(Simulated single fault conditions)	-	4000	10% Discount for the BIS
Annex D-1(Impulse test generators)	-	3000	10% Discount for the BIS
Annex D-2(Antenna interface test generator)	-	3000	10% Discount for the BIS
Annex D-3(Electronic pulse generator)	-	3000	10% Discount for the BIS
Annex E-1(Electrical energy source classification for audio signals)	-	3000	10% Discount for the BIS
Annex E-2(Audio signals used during test)	-	3000	10% Discount for the BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	3000	10% Discount for the BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	10% Discount for the BIS
Annex F-2(Letter symbols and graphical symbols)	-	500	10% Discount for the BIS
Annex F-3(Equipment markings)	-	500	10% Discount for the BIS
Annex F-4(Instructions)	-	500	10% Discount for the BIS
Annex F-5(Instructional safeguards)	-	500	10% Discount for the BIS
Annex G-1(Switches)	-	0	-
Annex G-2(Relays)	-	0	-
Annex G-3(Protective devices)	-	500	10% Discount for the BIS
Annex G-4(Connectors)	-	0	-
Annex G-5(Wound components)	-	5000	10% Discount for the BIS
Annex G-6(Wire insulation)	-	1000	10% Discount for the BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	10% Discount for the BIS
Annex G-8(Varistors)	-	0	-
Annex G-10(Resistors)	-	5000	10% Discount for the BIS
Annex G-11(Capacitors and RC units)	-	2000	10% Discount for the BIS
Annex G-12(Optocouplers)	-	0	-
Annex G-13(Printed boards)	-	3000	10% Discount for the BIS
Annex G-14(Coatings on component terminals)	-	1000	10% Discount for the BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2000	10% Discount for the BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	7000	10% Discount for the BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	500	10% Discount for the BIS
Annex H-2(Method A)	-	2000	10% Discount for the BIS
Annex H-3(Method B)	-	2000	10% Discount for the BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	10% Discount for the BIS
Annex K-1(General- Safety interlocks)	-	500	10% Discount for the BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	10% Discount for the BIS
Annex K-3(Inadvertent change of operating mode)	-	500	10% Discount for the BIS
Annex K-4(Interlock safeguard override)	-	500	10% Discount for the BIS
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	1000	10% Discount for the BIS
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	4000	10% Discount for the BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	4000	10% Discount for the BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	3000	10% Discount for the BIS
Annex M-6(Safeguards against short-circuits)	-	500	10% Discount for the BIS
Annex M-9(Preventing electrolyte spillage)	-	500	10% Discount for the BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	10% Discount for the BIS
Annex N(Electrochemical potentials (V))	-	500	10% Discount for the BIS
Annex O(Measurement of creepage distances and clearances)	-	4000	10% Discount for the BIS
Annex P-1(General-Safeguards against conductive objects)	-	500	10% Discount for the BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	10% Discount for the BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	10% Discount for the BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	500	10% Discount for the BIS
Annex Q-1(Limited power source)	-	4000	10% Discount for the BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	3000	10% Discount for the BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	10% Discount for the BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	10% Discount for the BIS
Annex S-4(Flammability classification of materials)	-	1000	10% Discount for the BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	10% Discount for the BIS
Annex T-1(General-Mechanical strength tests)	-	500	10% Discount for the BIS
Annex T-2(Steady force test, 10 N)	-	500	10% Discount for the BIS
Annex T-3(Steady force test, 30 N)	-	500	10% Discount for the BIS
Annex T-4(Steady force test, 100 N)	-	1000	10% Discount for the BIS
Annex T-5(Steady force test, 250 N)	-	3000	10% Discount for the BIS
Annex T-6(Enclosure impact test)	-	2000	10% Discount for the BIS
Annex T-7(Drop test)	-	2000	10% Discount for the BIS
Annex T-8(Stress relief test)	-	7000	10% Discount for the BIS
Annex T-9(Glass impact test)	-	5000	10% Discount for the BIS
Annex T-11(Test for telescoping or rod antennas)	-	1500	10% Discount for the BIS
Annex V-1(Accessible parts of equipment)	-	3000	10% Discount for the BIS
Annex V-2(Accessible part criterion)	-	500	10% Discount for the BIS
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	7000	10% Discount for the BIS
Annex Y-4(Gaskets)	-	0	-
Annex T-10(Glass fragmentation test)	-	3000	10% Discount for the BIS
Annex Y-6(Mechanical strength of enclosures)	-	3000	10% Discount for the BIS
Cl-9.6(Requirements for wireless power transmitters)	-	4000	10% Discount for the BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	4000	10% Discount for the BIS
Cl-4.1(General- materials, components)	-	2000	10% Discount for the BIS
Cl-4.2(Energy source classifications)	-	2000	10% Discount for the BIS
Cl-4.3(Protection against energy sources)	-	2000	10% Discount for the BIS
Cl-4.4(Safeguards)	-	1000	10% Discount for the BIS
Cl-4.5(Explosion)	-	500	10% Discount for the BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	500	10% Discount for the BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount for the BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	10% Discount for the BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	10% Discount for the BIS
Cl-4.10(Components requirements)	-	1000	10% Discount for the BIS
Cl-5.1(General- Electrically-caused injury)	-	1000	10% Discount for the BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	3000	10% Discount for the BIS
Cl-5.3(Protection against electrical energy sources)	-	2000	10% Discount for the BIS
Cl-5.4(Insulation materials and requirements)	-	5000	10% Discount for the BIS
Cl-5.5(Components as safeguards)	-	5000	10% Discount for the BIS
Cl-5.6(Protective conductor)	-	1000	10% Discount for the BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	10% Discount for the BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1200	10% Discount for the BIS
Cl-6.1(General- Electrically-caused fire)	-	500	10% Discount for the BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% Discount for the BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	10% Discount for the BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	3000	10% Discount for the BIS
Cl-6.5(Internal and external wiring)	-	3000	10% Discount for the BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	200	10% Discount for the BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.3(Ozone exposure)	-	200	10% Discount for the BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	200	10% Discount for the BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	200	10% Discount for the BIS
Cl-8.1(General- Mechanically-caused injury)	-	500	10% Discount for the BIS
Cl-8.2(Mechanical energy source classifications)	-	500	10% Discount for the BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	500	10% Discount for the BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	500	10% Discount for the BIS
Cl-8.5(Safeguards against moving parts)	-	4000	10% Discount for the BIS
Cl-8.6(Stability of equipment)	-	4000	10% Discount for the BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2500	10% Discount for the BIS
Cl-8.8(Handle strength)	-	1000	10% Discount for the BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount for the BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1500	10% Discount for the BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	3000	10% Discount for the BIS
Cl-9.1(General-Thermal burn injury)	-	500	10% Discount for the BIS
Cl-9.2(Thermal energy source classifications)	-	3000	10% Discount for the BIS
Cl-9.3(Touch temperature limits)	-	5000	10% Discount for the BIS
Cl-9.4(Safeguards against thermal energy sources)	-	500	10% Discount for the BIS
Cl-9.5(Requirements for safeguards)	-	500	10% Discount for the BIS
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	10% Discount for the BIS
Annex B-2(Normal operating conditions)	-	5000	10% Discount for the BIS
Annex B-3(Simulated abnormal operating conditions)	-	5000	10% Discount for the BIS
Annex B-4(Simulated single fault conditions)	-	5000	10% Discount for the BIS
Annex D-1(Impulse test generators)	-	3000	10% Discount for the BIS
Annex D-2(Antenna interface test generator)	-	3000	10% Discount for the BIS
Annex D-3(Electronic pulse generator)	-	2000	10% Discount for the BIS
Annex E-1(Electrical energy source classification for audio signals)	-	3000	10% Discount for the BIS
Annex E-2(Audio signals used during test)	-	3000	10% Discount for the BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	3000	10% Discount for the BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	10% Discount for the BIS
Annex F-2(Letter symbols and graphical symbols)	-	500	10% Discount for the BIS
Annex F-3(Equipment markings)	-	500	10% Discount for the BIS
Annex F-4(Instructions)	-	500	10% Discount for the BIS
Annex F-5(Instructional safeguards)	-	500	10% Discount for the BIS
Annex G-1(Switches)	-	0	-
Annex G-2(Relays)	-	0	-
Annex G-3(Protective devices)	-	500	10% Discount for the BIS
Annex G-4(Connectors)	-	0	-
Annex G-5(Wound components)	-	200	10% Discount for the BIS
Annex G-6(Wire insulation)	-	1000	10% Discount for the BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	10% Discount for the BIS
Annex G-8(Varistors)	-	0	-
Annex G-10(Resistors)	-	7000	10% Discount for the BIS
Annex G-11(Capacitors and RC units)	-	2000	10% Discount for the BIS
Annex G-12(Optocouplers)	-	0	-
Annex G-13(Printed boards)	-	3000	10% Discount for the BIS
Annex G-14(Coatings on component terminals)	-	1000	10% Discount for the BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	2000	10% Discount for the BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	10000	10% Discount for the BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	500	10% Discount for the BIS
Annex H-2(Method A)	-	2000	10% Discount for the BIS
Annex H-3(Method B)	-	2000	10% Discount for the BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	10% Discount for the BIS
Annex K-1(General- Safety interlocks)	-	500	10% Discount for the BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	10% Discount for the BIS
Annex K-3(Inadvertent change of operating mode)	-	500	10% Discount for the BIS
Annex K-4(Interlock safeguard override)	-	500	10% Discount for the BIS
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	1000	10% Discount for the BIS
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	4000	10% Discount for the BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	4000	10% Discount for the BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	3000	10% Discount for the BIS
Annex M-6(Safeguards against short-circuits)	-	500	10% Discount for the BIS
Annex M-9(Preventing electrolyte spillage)	-	500	10% Discount for the BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	10% Discount for the BIS
Annex N(Electrochemical potentials (V))	-	500	10% Discount for the BIS
Annex O(Measurement of creepage distances and clearances)	-	5000	10% Discount for the BIS
Annex P-1(General-Safeguards against conductive objects)	-	500	10% Discount for the BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	10% Discount for the BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	10% Discount for the BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	500	10% Discount for the BIS
Annex Q-1(Limited power source)	-	5000	10% Discount for the BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	3000	10% Discount for the BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	7000	10% Discount for the BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	7000	10% Discount for the BIS
Annex S-4(Flammability classification of materials)	-	1000	10% Discount for the BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	7000	10% Discount for the BIS
Annex T-1(General-Mechanical strength tests)	-	500	10% Discount for the BIS
Annex T-2(Steady force test, 10 N)	-	500	10% Discount for the BIS
Annex T-3(Steady force test, 30 N)	-	500	10% Discount for the BIS
Annex T-4(Steady force test, 100 N)	-	1000	10% Discount for the BIS
Annex T-5(Steady force test, 250 N)	-	3000	10% Discount for the BIS
Annex T-6(Enclosure impact test)	-	2000	10% Discount for the BIS
Annex T-7(Drop test)	-	2000	10% Discount for the BIS
Annex T-8(Stress relief test)	-	7000	10% Discount for the BIS
Annex T-9(Glass impact test)	-	5000	10% Discount for the BIS
Annex T-11(Test for telescoping or rod antennas)	-	1500	10% Discount for the BIS
Annex V-1(Accessible parts of equipment)	-	3000	10% Discount for the BIS
Annex V-2(Accessible part criterion)	-	500	10% Discount for the BIS
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	7000	10% Discount for the BIS
Annex T-10(Glass fragmentation test)	-	3000	10% Discount for the BIS
Annex Y-6(Mechanical strength of enclosures)	-	3000	10% Discount for the BIS
Cl-9.6(Requirements for wireless power transmitters)	-	4000	10% Discount for the BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	4000	10% Discount for the BIS
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	1000	10% Discount for the BIS
Cl-4.3(Protection against energy sources)	-	1000	10% Discount for the BIS
Cl-4.4(Safeguards)	-	1000	10% Discount for the BIS
Cl-4.5(Explosion)	-	1000	10% Discount for the BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	1000	10% Discount for the BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount for the BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	10% Discount for the BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% Discount for the BIS
Cl-4.10(Components requirements)	-	1000	10% Discount for the BIS
Cl-5.1(General- Electrically-caused injury)	-	1000	10% Discount for the BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	10% Discount for the BIS
Cl-5.3(Protection against electrical energy sources)	-	1000	10% Discount for the BIS
Cl-5.4(Insulation materials and requirements)	-	1000	10% Discount for the BIS
Cl-5.5(Components as safeguards)	-	1000	10% Discount for the BIS
Cl-5.6(Protective conductor)	-	1000	10% Discount for the BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1000	10% Discount for the BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	10% Discount for the BIS
Cl-6.1(General- Electrically-caused fire)	-	1000	10% Discount for the BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	10% Discount for the BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% Discount for the BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	10% Discount for the BIS
Cl-6.5(Internal and external wiring)	-	1000	10% Discount for the BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	10% Discount for the BIS
Cl-7.3(Ozone exposure)	-	1000	10% Discount for the BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1000	10% Discount for the BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	1000	10% Discount for the BIS
Cl-8.1(General- Mechanically-caused injury)	-	1000	10% Discount for the BIS
Cl-8.2(Mechanical energy source classifications)	-	1000	10% Discount for the BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	10% Discount for the BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	10% Discount for the BIS
Cl-8.5(Safeguards against moving parts)	-	1000	10% Discount for the BIS
Cl-8.6(Stability of equipment)	-	1000	10% Discount for the BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1000	10% Discount for the BIS
Cl-8.8(Handle strength)	-	1000	10% Discount for the BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount for the BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1000	10% Discount for the BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1000	10% Discount for the BIS
Cl-9.1(General-Thermal burn injury)	-	1000	10% Discount for the BIS
Cl-9.2(Thermal energy source classifications)	-	1000	10% Discount for the BIS
Cl-9.3(Touch temperature limits)	-	1000	10% Discount for the BIS
Cl-9.4(Safeguards against thermal energy sources)	-	1000	10% Discount for the BIS
Cl-9.5(Requirements for safeguards)	-	1000	10% Discount for the BIS
Annex A(Examples of equipment within the scope of this document)	-	1000	10% Discount for the BIS
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	10% Discount for the BIS
Annex B-2(Normal operating conditions)	-	1000	10% Discount for the BIS
Annex B-3(Simulated abnormal operating conditions)	-	1000	10% Discount for the BIS
Annex B-4(Simulated single fault conditions)	-	1000	10% Discount for the BIS
Annex D-1(Impulse test generators)	-	1000	10% Discount for the BIS
Annex D-2(Antenna interface test generator)	-	1000	10% Discount for the BIS
Annex D-3(Electronic pulse generator)	-	1000	10% Discount for the BIS
Annex E-1(Electrical energy source classification for audio signals)	-	1000	10% Discount for the BIS
Annex E-2(Audio signals used during test)	-	1000	10% Discount for the BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	10% Discount for the BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	10% Discount for the BIS
Annex F-2(Letter symbols and graphical symbols)	-	1000	10% Discount for the BIS
Annex F-3(Equipment markings)	-	1000	10% Discount for the BIS
Annex F-4(Instructions)	-	1000	10% Discount for the BIS
Annex F-5(Instructional safeguards)	-	1000	10% Discount for the BIS
Annex G-1(Switches)	-	1000	10% Discount for the BIS
Annex G-2(Relays)	-	1000	10% Discount for the BIS
Annex G-3(Protective devices)	-	1000	10% Discount for the BIS
Annex G-4(Connectors)	-	1000	10% Discount for the BIS
Annex G-5(Wound components)	-	1000	10% Discount for the BIS
Annex G-6(Wire insulation)	-	1000	10% Discount for the BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	10% Discount for the BIS
Annex G-8(Varistors)	-	1000	10% Discount for the BIS
Annex G-10(Resistors)	-	1000	10% Discount for the BIS
Annex G-11(Capacitors and RC units)	-	1000	10% Discount for the BIS
Annex G-12(Optocouplers)	-	1000	10% Discount for the BIS
Annex G-13(Printed boards)	-	1000	10% Discount for the BIS
Annex G-14(Coatings on component terminals)	-	1000	10% Discount for the BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	1000	10% Discount for the BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	1000	10% Discount for the BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	10% Discount for the BIS
Annex H-2(Method A)	-	1000	10% Discount for the BIS
Annex H-3(Method B)	-	1000	10% Discount for the BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	10% Discount for the BIS
Annex K-1(General- Safety interlocks)	-	1000	10% Discount for the BIS
Annex K-2(Components of the safety interlock safeguard mechanism)	-	1000	10% Discount for the BIS
Annex K-3(Inadvertent change of operating mode)	-	1000	10% Discount for the BIS
Annex K-4(Interlock safeguard override)	-	1000	10% Discount for the BIS
Annex K-5(Fail-safe)	-	1000	10% Discount for the BIS
Annex K-6(Mechanically operated safety interlocks)	-	1000	10% Discount for the BIS
Annex K-7(Interlock circuit isolation)	-	1000	10% Discount for the BIS
Annex L-1(General requirements)	-	1000	10% Discount for the BIS
Annex L-2(Permanently connected equipment)	-	1000	10% Discount for the BIS
Annex L-3()	-	1000	10% Discount for the BIS
Annex L-4(Single-phase equipment)	-	1000	10% Discount for the BIS
Annex L-5(Three-phase equipment)	-	1000	10% Discount for the BIS
Annex L-6(Switches as disconnect devices)	-	1000	10% Discount for the BIS
Annex L-7(Plugs as disconnect devices)	-	1000	10% Discount for the BIS
Annex L-8(Multiple power sources)	-	1000	10% Discount for the BIS
Annex L-9(Compliance criteria)	-	1000	10% Discount for the BIS
Annex M-1(General requirements)	-	1000	10% Discount for the BIS
Annex M-2(Safety of batteries and their cells)	-	1000	10% Discount for the BIS
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	10% Discount for the BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	10% Discount for the BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	10% Discount for the BIS
Annex M-6(Safeguards against short-circuits)	-	1000	10% Discount for the BIS
Annex M-9(Preventing electrolyte spillage)	-	1000	10% Discount for the BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1000	10% Discount for the BIS
Annex N(Electrochemical potentials (V))	-	1000	10% Discount for the BIS
Annex O(Measurement of creepage distances and clearances)	-	1000	10% Discount for the BIS
Annex P-1(General-Safeguards against conductive objects)	-	1000	10% Discount for the BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	10% Discount for the BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	10% Discount for the BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	10% Discount for the BIS
Annex Q-1(Limited power source)	-	1000	10% Discount for the BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	10% Discount for the BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	10% Discount for the BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	10% Discount for the BIS
Annex S-4(Flammability classification of materials)	-	1000	10% Discount for the BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	10% Discount for the BIS
Annex T-1(General-Mechanical strength tests)	-	1000	10% Discount for the BIS
Annex T-2(Steady force test, 10 N)	-	1000	10% Discount for the BIS
Annex T-3(Steady force test, 30 N)	-	1000	10% Discount for the BIS
Annex T-4(Steady force test, 100 N)	-	1000	10% Discount for the BIS
Annex T-5(Steady force test, 250 N)	-	1000	10% Discount for the BIS
Annex T-6(Enclosure impact test)	-	1000	10% Discount for the BIS
Annex T-7(Drop test)	-	1000	10% Discount for the BIS
Annex T-8(Stress relief test)	-	1000	10% Discount for the BIS
Annex T-9(Glass impact test)	-	1000	10% Discount for the BIS
Annex T-11(Test for telescoping or rod antennas)	-	1000	10% Discount for the BIS
Annex V-1(Accessible parts of equipment)	-	1000	10% Discount for the BIS
Annex V-2(Accessible part criterion)	-	1000	10% Discount for the BIS
Annex W(Comparison of terms introduced in this document)	-	1000	10% Discount for the BIS
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	10% Discount for the BIS
Annex T-10(Glass fragmentation test)	-	1000	10% Discount for the BIS
Annex Y-6(Mechanical strength of enclosures)	-	1000	10% Discount for the BIS
Cl-9.6(Requirements for wireless power transmitters)	-	1000	10% Discount for the BIS
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	1000	10% Discount for the BIS
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000	10% Discount for the BIS
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000	10% Discount for the BIS
Annex J-2(Type tests)	-	1000	10% Discount for the BIS

17 Nov, 2027

-
included w.e.f 18.11.2025

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15000		None
5.2(Message Readability)	-	15000		None

17 Nov, 2027

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Electronics

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	7000	None
1.7(Markings and instructions)	-	4000	None
2.1(Protection from electric shock and energy hazards)	-	3000	None
2.2(SELV circuits)	-	3000	None
2.3(TNV circuits)	-	2000	None
2.4(Limited current circuits)	-	2500	None
2.5(Limited power sources .)	-	3500	None
2.6(Provisions for earthing and bonding)	-	3000	None
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	None
2.8(Safety interlocks)	-	1500	None
2.9(Electrical insulation)	-	5000	None
2.10(Clearances, creepage distances and distances through insulation)	-	5000	None
3.1(General)	-	3000	None
3.2(Connection to a mains supply)	-	2000	None
3.3(Wiring terminals for connection of external conductors)	-	2500	None
3.5(Interconnection of equipment)	-	2000	None
4.1(Stability)	-	4000	None
4.2(Mechanical strength)	-	7000	None
4.3(Design and construction)	-	2000	None
4.4(Protection against hazardous moving parts)	-	3000	None
4.5(Thermal requirements)	-	10000	None
4.6(Openings in enclosures)	-	2500	None
4.7(Resistance to fire)	-	3000	None
5.1(Touch current and protective conductor curren)	-	5000	None
5.2(Electric strength)	-	5000	None
5.3(Abnormal operating and fault conditions)	-	10000	None
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	None
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000	None
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	None
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	None
7.4(Insulation between primary circuits and cable distribution systems)	-	3000	None
1.5(Components)	-	10000	Test Facilities are not available in lab( Based on technical Verification of approvals with due correlation between the components used and the approval certificates)

17 Nov, 2027

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Electronics

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	12000	None
7(Heating under normal operating conditions)	-	19000	None
8(Constructional requirements with regard to the protection against electric shock)	-	5000	None
9(Electric shock hazard under normal operating conditions)	-	8000	None
10(Insulation requirements)	-	9000	None
11(Fault conditions)	-	15500	None
12(Mechanical strength)	-	14000	None
13(CLEARANCES and CREEPAGE DISTANCES)	-	8000	None
15(TERMINALS)	-	3000	None
16(External flexible cords)	-	3500	None
17(Electrical connections and mechanical fixings)	-	4500	None
19(Stability and mechanical hazards)	-	7000	None
20(Resistance to fire)	-	6500	None
14(Components)	-	10000	None

17 Nov, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

SGS INDIA PRIVATE LIMITED, BENGALURU

No 38/1 and 38/2, New BBMP, No.88/45/45, Beretena Agrahara Begur Hobli, Hosur Main Road, Bangalore-560100, Bengaluru, Bengaluru Urban, Karnataka, 560100

8095661144 rajesh.sp@sgs.com

Scope List