BIS - LIMS (Laboratory Information Management System)

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

32/41 & 32/40 , South Side of GT Road, UPSIDC Industrial Area,Ghaziabad (Delhi-NCR), Ghaziabad, Ghaziabad, Uttar Pradesh, 201009

9810243870 ekotestinglabs@gmail.com

Scope List

Reset

71 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

ALL

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	39900	-
Cl 5.2.2(" Height of upper ")	-	39900	-
Cl 5.2.3(Heel area)	-	39900	-
Cl 5.3.1.1(Construction of whole footwear)	-	39900	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	39900	-
Cl 5.3.2.1(Toe protection - general)	-	39900	-
Cl 5.3.2.2(Internal length)	-	39900	-
Cl 5.3.2.3(Width of toecap flange)	-	39900	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	39900	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	39900	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	39900	-
Cl 5.3.2.6(Impact resistance)	-	39900	-
Cl 5.3.2.7(Compression resistance)	-	39900	-
Cl 5.3.3(Leak proofness)	-	39900	-
Cl 5.3.4("Specific ergonomic features ")	-	39900	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	39900	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	39900	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	39900	-
Cl 5.3.7(Seam strength)	-	39900	-
Cl 5.3.8(Lead Content ( National Annex A))	-	39900	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	39900	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	39900	-
Cl 5.4.2(Thickness)	-	39900	-
Cl 5.4.3(Tear strength)	-	39900	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	39900	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	39900	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	39900	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	39900	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	39900	-
Cl 5.4.7(Resistance to hydrolysis)	-	39900	-
Cl 5.5.2(Lining- Tear strength)	-	39900	-
Cl 5.5.3(Lining- Abrasion resistance)	-	39900	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	39900	-
Cl 5.6.2(Tear strength of tongue)	-	39900	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	39900	-
Cl 5.7.2(Water permeability of insock)	-	39900	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	39900	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	39900	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	39900	-
Cl 5.8.2.1(Thickness of Outsole)	-	39900	-
Cl 5.8.2.2(Cleated area)	-	39900	-
Cl 5.8.3(Outsole- Tear strength)	-	39900	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	39900	-
Cl 5.8.5(Outsole-Flexing resistance)	-	39900	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	39900	-
Cl 5.8.7(Interlayer bond strength)	-	39900	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	39900	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	39900	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	39900	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	39900	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	39900	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	39900	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	39900	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	39900	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	39900	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	39900	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	39900	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	39900	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	39900	-
Cl 6.2.4(Energy absorption of seat region)	-	39900	-
Cl 6.2.5(Water resistance)	-	39900	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	39900	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	39900	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	39900	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	39900	-
Cl 6.2.8.3(Resistance to cutting)	-	39900	-
Cl 6.2.9(Scuff cap)	-	39900	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	39900	-
Cl 6.3(Upper — Water penetration and absorption)	-	39900	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	39900	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	39900	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	39900	-
Cl 6.4.3.2(Design of Ladder grip)	-	39900	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	39900	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	39900	-
Cl 7("Marking ")	-	39900	-
Cl 7("Marking ")	-	39900	-
Cl 5.4.5(Flexing resistance)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	39900	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	39900	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	39900	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	39900	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	39900	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	39900	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	39900	-
Cl 5.8.2.3(Cleat height)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	39900	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	39900	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	39900	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	39900	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	39900	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	39900	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	39900	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	39900	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	39900	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	39900	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	39900	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	39900	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	39900	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	39900	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	39900	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	39900	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	39900	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	39900	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	39900	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	39900	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	39900	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	39900	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	39900	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	39900	-

-
-

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

ALL

37400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	300	-
Cl 5.2.2(" Height of upper ")	-	400	-
Cl 5.2.3(Heel area)	-	400	-
Cl 5.3.1.1(Construction of whole footwear)	-	500	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2(Leak proofness)	-	500	-
Cl 5.3.3(Specific ergonomic features)	-	500	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	500	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	500	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	500	-
Cl 5.3.6(Seam strength)	-	500	-
Cl 5.3.7(Lead Content ( National Annex A))	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	500	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	800	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	800	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	500	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	500	-
Cl 5.8.2.2(Cleated area)	-	500	-
Cl 5.8.2.3(Cleat height)	-	500	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	800	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	800	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	800	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	800	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	800	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	800	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	800	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	800	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	800	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	800	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	800	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	800	-
Cl 6.2.6(Ankle protection)	-	0	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	800	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.7.3(Resistance to cutting)	-	500	-
Cl 6.2.8(Scuff cap)	-	500	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	800	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	800	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	800	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	800	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	800	-
Cl 7("Marking ")	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	800	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	800	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	700	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	700	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	700	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	700	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	700	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	700	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	600	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	600	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	600	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	600	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	600	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	600	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	600	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	600	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	600	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	600	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	600	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	600	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	600	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	600	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	600	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	600	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	600	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	600	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	600	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	600	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	600	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	600	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	600	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	600	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	600	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	600	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	500	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	500	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	500	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	500	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	500	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	500	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution (ii))	-	700	-

-
-

IS 10702 (2023)

Hawai Chappal-Specification

ALL

34800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	500	-
4.2(Length)	-	400	-
4.3(Thickness)	-	400	-
4.4 , Table No. 1 , i)(Density)	-	600	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	500	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	700	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	600	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	700	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	600	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	600	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	1000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	600	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	400	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	500	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	1000	-
6(MARKING AND PACKING)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	700	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	700	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	800	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	700	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	600	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	700	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl.No. 5.2(lead content)	-	700	-
Clause 4.1 - 4.1.1(Bottom Material)	-	500	-
Clause 4.1 - 4.1.2(Strap Material)	-	400	-
Clause 4.1 - 4.1.3(Material)	-	500	-
Clause 4.1 - 4.1.4(Material)	-	500	-
Clause 4.2(Material)	-	500	-
Clause 4.3 - 4.3.1(Thickness)	-	400	-
Clause 4.3 - 4.3.2(Thickness)	-	400	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	500	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	800	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	800	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	800	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	800	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	500	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	500	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	1000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	500	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	500	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	400	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	400	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	400	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	400	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	500	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	1000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	1000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	700	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	700	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	800	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	600	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	700	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	700	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	700	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	700	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	700	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	700	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	700	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	700	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	700	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	700	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	700	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	600	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	500	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	700	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	700	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	700	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	600	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Hawai Chappal-Specification(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	700	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	600	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1000	-

-
-

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

ALL

27400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	300	-
5.3(Welding Defects)	-	400	-
7.1(Material)	-	100	-
7.1.2.1 & 7.1.2.2(Thickness)	-	200	-
7.1.3(Coating Thickness)	-	1000	-
7.1.3(Material – coating cadmium)	-	1000	-
7.1.2.2(Bisphenol A (BPA))	-	1500	-
7.1.4.3(O-Ring / Washer- Defects)	-	500	-
7.2(Capacity)	-	250	-
7.3(Heat Retention Capability)	-	800	-
7.4(Cold Retention Capability)	-	800	-
7.5.1(Drop Impact Test)	-	800	-
7.5.2(Pendulum Impact Test)	-	800	-
7.6(Fixing Strength of the Handle)	-	800	-
7.7(Test for Strength of Shoulder Strap)	-	800	-
7.8(Test for strength of cord)	-	800	-
7.9(Leakage Test)	-	1200	-
7.10(Joint Leak Test)	-	1200	-
7.11(Staining Test)	-	1200	-
7.13(Seepage test)	-	1200	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	1200	-
7.15(Test for length of the shoulder cap)	-	1200	-
7.16(Stability of Flask)	-	1200	-
7.17(Pour Test)	-	1200	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	100	-
10(Packaging)	-	500	-
7.1.3(Coating- Adhesion test)	-	1000	-
7.1.3(Coating - Thickness test)	-	1000	-
7.1.3(Coating- Salt water corrosion test)	-	1000	-
7.1.4.1(Stopper)	-	500	-
7.1.4.2(O-ring/washer- Overall migration)	-	500	-
7.1.4.2(O-ring/washer- Shore hardness)	-	500	-
7.1.4.2(O-ring/washer- BPA)	-	1200	-
7.1.5(Auxillary closure)	-	500	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	500	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	1000	-
Cl-5.3(Welding Electrode)	-	5000	-
Cl.7.1.2.1(Test for leaching)	-	5000	-
Cl. 7.1.2.1(Sensorial Test)	-	2000	-
Cl-7.1.3, Table-1(Lead Limit)	-	3000	-

-
-

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

ALL

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	27500	-
5.3(Manufacture and Workmanship)	-	27500	-
7.1(Material)	-	27500	-
7.1.2(Thickness)	-	27500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	27500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	27500	-
7.1.2.8(Bisphenol A(BPA))	-	27500	-
7.3(Capacity)	-	27500	-
7.4(Heat Retention Capability)	-	27500	-
7.5(Cold Retention Capability)	-	27500	-
7.6.1(Drop Impact Test)	-	27500	-
7.6.2(Pendulum Impact Test)	-	27500	-
7.7(Fixing Strength of the Handle)	-	27500	-
7.8(Test for Strength of Shoulder Strap)	-	27500	-
7.9(Leakage Test)	-	27500	-
7.10(Joint Leak Test)	-	27500	-
7.11(Staining Test)	-	27500	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	27500	-
7.13.1(Length of the Shoulder Strap)	-	27500	-
7.13.2(Stability of Insulated Container)	-	27500	-
7.13.3(Cleaning)	-	27500	-
7.14(Seepage Test)	-	27500	-
9.1(Marking)	-	27500	-
9.2(BIS certification marking)	-	27500	-
10(Packaging)	-	27500	-
CLAUSE 5.2(Welding Defects)	-	27500	-
CLAUSE 7.1(Materials)	-	27500	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	27500	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	27500	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	27500	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	27500	-
CLAUSE 7.1.2.1(Adhesion Test)	-	27500	-
CLAUSE 7.1.2.1(Lead Limit)	-	27500	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	27500	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	27500	-
CLAUSE 7.3(Capacity)	-	27500	-
CLAUSE 7.4(Heat Retention Capability)	-	27500	-
CLAUSE 7.5(Cold Retention Capability)	-	27500	-
CLAUSE 7.6.1(Drop Impact)	-	27500	-
CLAUSE 7.6.2(Pendulum Impact)	-	27500	-
CLAUSE 7.7(Fixing Strength of Handle)	-	27500	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	27500	-
CLAUSE 7.9(Leakage Test)	-	27500	-
CLAUSE 7.10(Joint Leak Test)	-	27500	-
CLAUSE 7.11(Staining Test)	-	27500	-
CLAUSE 7.12(Checking of PUF insulation)	-	27500	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	27500	-
CLAUSE 7.13.2(Stability of Flask)	-	27500	-
CLAUSE 7.1.1(Material - inner container)	-	27500	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	27500	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	27500	-
Cl 7.1.2.2(Polymer - test for BPA)	-	27500	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	27500	-
Cl 7.1.2.4(Silicon gasket - defects)	-	27500	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	27500	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	27500	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	27500	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	27500	-
Cl 7.1.2.5(Thickness of steel rim)	-	27500	-
Cl 7.1.2.5(Thickness of glass lid)	-	27500	-
Cl 7.1.2.6(Thermal insulating material)	-	27500	-
Cl 7.1.2.7(Additional lid)	-	27500	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	27500	-
Cl 7.1.2.9(Internal utensils- material)	-	27500	-
Cl 7.1.2.9(Internal utensils- thickness)	-	27500	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	27500	-
Cl 7.1.2.9(Test for BPA)	-	27500	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	27500	-

-
-

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

21900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	7000	-
Cl 3.2(Material used for composite bottom)	-	7000	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	7000	-
Cl 3.4(Material used for stainless steel lid)	-	7000	-
Cl 3.5(Material used for tempered glass lid)	-	7000	-
Cl 3.5(Material used for stainless steel rim)	-	7000	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	500	-
Cl 4.2(Thickness of the finished utensil)	-	500	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	500	-
CL 5.2(Accessibility for cleaning)	-	250	-
Cl 5.3(Joining of handles to the utensils)	-	250	-
Cl 5.4(Requirement for handles)	-	14500	-
Cl 5.5(Welding (Finish))	-	250	-
Cl 5.6(Finish of 3-ply utensil)	-	250	-
Cl 5.7(Requirement for coating)	-	1500	-
Cl 5.8(Coating thickness test)	-	1500	-
Cl 5.8(Coating adhesion test)	-	1500	-
Cl 5.8.1(Thermal shock test (Coating))	-	1500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	1500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	1000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	1500	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	1500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	2500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	1500	-
Cl 6.7(Nominal Capacity Test)	-	200	-
Cl 8(Marking)	-	250	-
3.1(a) Carbon)	-	7000	Already Mentioned
3.1(b) Silicon)	-	7000	Already Mentioned
3.1(c)Manganese)	-	7000	Already Mentioned
3.1(d) Nickel)	-	7000	Already Mentioned
3.1(Chromium)	-	7000	Already Mentioned
3.1(Sulphu)	-	7000	Already Mentioned
3.1(Phosphorus)	-	7000	Already Mentioned
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	7000	Already Mentioned
3.1(Nitrogen)	-	7000	Already Mentioned
3.2 a(a) Carbon)	-	7000	Already Mentioned
3.2 a(b) Silicon)	-	7000	Already Mentioned
68995(Manganese)	-	7000	Already Mentioned
3.2 a(d) Nickel)	-	7000	Already Mentioned
3.2 a(Chromium)	-	7000	Already Mentioned
3.2 a(Sulphur)	-	7000	Already Mentioned
3.2 a(g) Phosphorus)	-	7000	Already Mentioned
3.2 a(h) Copper)	-	7000	Already Mentioned
3.2 a(Nitrogen)	-	7000	Already Mentioned
3.2 b(a) Aluminium)	-	7000	Already Mentioned
3.2 b(b) Copper)	-	7000	Already Mentioned
3.2 b(c) Magnesium)	-	7000	Already Mentioned
3.2 b(d) Silicon)	-	7000	Already Mentioned
3.2 b(e) Iron)	-	7000	Already Mentioned
3.2 b(f) Manganese)	-	7000	Already Mentioned
3.2 b(d) Silicon)	-	7000	Already Mentioned
3.2 b(e) Iron)	-	7000	Already Mentioned
3.2 b(f) Manganese)	-	7000	Already Mentioned
3.2 b(g) Zinc)	-	7000	Already Mentioned
3.2 b(h) Titanium)	-	7000	Already Mentioned
3.2 b(i) Chromium)	-	7000	Already Mentioned
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	7000	Already Mentioned
3.2 b(k) Lead)	-	7000	Already Mentioned
3.2 c(a) Carbon)	-	7000	Already Mentioned
3.2 c(b) Silicon)	-	7000	Already Mentioned
3.2 c(c) Manganese)	-	7000	Already Mentioned
3.2 c(d) Nickel)	-	7000	Already Mentioned
3.2 c(e) Chromium)	-	7000	Already Mentioned
3.2 c(f) Sulphur)	-	7000	Already Mentioned
3.2 c(g) Phosphorus)	-	7000	Already Mentioned
3.3(a) Inner layer)	-	7000	Already Mentioned
3.3(b) Middlelayer)	-	7000	Already Mentioned
3.3(c) Outerlayer)	-	7000	Already Mentioned
3.4(a) Carbon)	-	7000	Already Mentioned
3.4(b) Silicon)	-	7000	Already Mentioned
3.4(c) Manganese)	-	7000	Already Mentioned
3.4(d) Nickel)	-	7000	Already Mentioned
3.4(e) Chromium)	-	7000	Already Mentioned
3.4(f) Sulphur)	-	7000	Already Mentioned
3.4(g) Phosphorus)	-	7000	Already Mentioned
3.4(h) Copper)	-	7000	Already Mentioned
3.4(i) Nitrogen)	-	7000	Already Mentioned
3.4(Thickness stainless steel lid)	-	7000	Already Mentioned
3.5(If the utensils provided with tempered glass lid)	-	7000	Already Mentioned
4.1(Shapes and Dimensions)	-	200	-
4.2(Thickness of the sheet)	-	0	Already Mentioned
4.3(Classifications)	-	0	Already Mentioned
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	200	-
4.3(Thickness of protective layer (as per IS 15960))	-	0	Already Mentioned
4.4(Thickness of 3ply full body utensil)	-	0	Already Mentioned
5(Workmanship and finish)	-	0	Already Mentioned
5.4(Handles)	-	0	Already Mentioned
4.1 of IS 13395(Construction)	-	0	Already Mentioned
4.2 of IS 13395(Materials)	-	0	Already Mentioned
4.3 of IS 13395(Selection and Size)	-	0	Already Mentioned
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	0	Already Mentioned
4.5 of IS 13395(Attachment to Cookware)	-	0	Already Mentioned
5.2 of IS 13395(Bending Strength)	-	0	Already Mentioned
5.3 of IS 13395(Torque Strength)	-	0	Already Mentioned
5.4 of IS 13395(Impact Strength)	-	0	Already Mentioned
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	0	Already Mentioned
5.6 of IS 13395(Leakage)	-	0	Already Mentioned
5.7 of IS 13395(Thermal Insulation)	-	0	Already Mentioned
5.8 of IS 13395(Heat Resistance)	-	0	Already Mentioned
5.9 of IS 13395(Washing Resistance)	-	0	Already Mentioned
5.10 of IS 13395(Burning Resistance)	-	0	Already Mentioned
5.5(Material comes in contact with food)	-	0	Already Mentioned
6.1(Staining Test)	-	0	Already Mentioned
6.2(Mechanical Shock Test)	-	0	Already Mentioned
6.3(Thermal Shock Test)	-	0	Already Mentioned
6.4(Dry Heat Test)	-	0	Already Mentioned
6.6(Heat test)	-	0	Already Mentioned
6.7.1(Nominal Capacity Test)	-	0	Already Mentioned
6.7.2(Internal diameter of utensil)	-	0	Already Mentioned
Annex C(Test for leaching)	-	1500	-
Annex C(Sensorial test)	-	700	-
Cl-3.6 (Amendment No-1)(welding for utensils)	-	500	-
Cl-3.6 (Amendment No-1)(weld)	-	1500	-
Cl-3.7 (Amendment No-1)(Exterior plastic moulding and plastic lid ( food grade))	-	1500	-

-
-

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	15000	-
Clause no. 3.1(Top Cover / Top Sheet)	-	15000	-
Clause no. 3.2(Absorbent Core)	-	15000	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	15000	-
Clause no. 4(Fastening & Securing Mechanism)	-	15000	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	15000	-
Clause no.6(Type and Size: FOR X LARGE)	-	15000	-
Clause no.6(Diaper Length)	-	15000	-
Clause no.6(Diaper Width)	-	15000	-
Clause no.6(Diaper Crotch)	-	15000	-
Clause no.6(Absorbent Core Length)	-	15000	-
Clause no.6(Absorbent Core Width Back)	-	15000	-
Clause no.6(Absorbent Core Width Front)	-	15000	-
Clause no.6(Core Crotch Width)	-	15000	-
Clause no.7.1(pH Value)	-	15000	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	15000	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	15000	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	15000	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	15000	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	15000	-
6(Type and Size)	-	15000	-
7.1(pH Test)	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-butyl phthalate (DBP))	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	15000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	15000	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	15000	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no. 7.4(Biocompatibility Evaluation- Irritation)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Skin Sensitization)	-	0	-
Clause no.7.5(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	0	-
9(Marking)	-	15000	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	15000	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	15000	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	15000	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	15000	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	15000	-

-
-

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

ALL

56900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	56900	-
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	56900	-
Cl-6.2(Design)	-	56900	-
Cl-6.3(Size and Fitting)	-	56900	-
Cl-6.4(Height of Upper)	-	56900	-
Cl-6.5.1(Whole Footwear-Construction)	-	56900	-
Cl-6.5.2(Whole Footwear-Ergonomic Feature)	-	56900	-
Cl-6.5.3(Whole Footwear-Upper – Outsole Bond Strength)	-	56900	-
Cl-6.5.4(Whole Footwear- Slip Resistance)	-	56900	-
Cl-6.5.5(Whole Footwear- Resistance to Fuel Oil)	-	56900	-
Cl-6.5.6(Whole Footwear- Impact Resistance)	-	56900	-
Cl-6.5.7(Whole Footwear- Compression Resistance)	-	56900	-
Cl-6.5.8(Whole Footwear- Resistance to Corrosion)	-	56900	-
Cl-6.6.2(Upper- Material)	-	56900	-
Cl-6.6.3(Upper-Tear Strength)	-	56900	-
Cl-6.6.4(Upper- Tensile strength)	-	56900	-
Cl-6.6.5(Upper- Water Vapour Permeability and Coefficient)	-	56900	-
Cl-6.7.1(Vamp and quarter lining-Material)	-	56900	-
Cl-6.7.2(Vamp and quarter lining-Tear strength)	-	56900	-
Cl-6.7.3(Vamp and quarter lining-Abrasion resistance)	-	56900	-
Cl-6.7.4(Vamp and quarter lining-Water vapour permeability and coefficient)	-	56900	-
Cl-6.8(Toecaps -Whole toecap)	-	56900	-
Cl-6.9.1(Insole- Material)	-	56900	-
Cl-6.9.2(Insole-Thickness)	-	56900	-
Cl-6.9.3(Insole- Abrasion resistance)	-	56900	-
Cl-6.9.4(Insole- Water absorption and desorption)	-	56900	-
Cl-6.10(Insocks-Thickness)	-	56900	-
Cl-6.10.1(Insocks-Material)	-	56900	-
Cl-6.10.2(Insocks-Abrasion resistance)	-	56900	-
Cl-6.10.3(Insocks-Water absorption and desorption)	-	56900	-
Cl-6.11(Stiffener)	-	56900	-
Cl-6.12(Tongue -Material)	-	56900	-
Cl-6.13(Closing thread-- Properties)	-	56900	-
Cl-6.14.1(Outsole-Material)	-	56900	-
Cl-6.14.2, 6.14.3 & 6.14.4(Outsole-Thickness, cleat area and cleat height)	-	56900	-
Cl-6.14.5(Outsole-Tear strength)	-	56900	-
Cl-6.14.6(Outsole-Abrasion resistance)	-	56900	-
Cl-6.14.7(Outsole-Flexing resistance)	-	56900	-
Cl-6.14.8(Outsole-Interlayer bond strength)	-	56900	-
Cl-6.15.1(Laces-Material)	-	56900	-
Cl-6.15.2(Laces-Colour Fastness)	-	56900	-
Cl-6.15.3(Laces-Abrasion Resistance)	-	56900	-
Cl-6.15.4(Laces-Breaking load)	-	56900	-
Cl-7.1, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	56900	-
Cl-7.2(PVC outsole)	-	56900	-
Cl-8.3(Cold insulation of Sole)	-	56900	-
Cl-8.4(Heat insulation of Sole)	-	56900	-
Cl-10(Marking)	-	56900	-
cL-7.1, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	56900	-
Cl-7.1 Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (x)(pH)	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	56900	-
Cl-7.1, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	56900	-

-
-

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

ALL

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	26000	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	26000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	26000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	26000	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	26000	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	26000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	26000	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	26000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	26000	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	26000	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	26000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	26000	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	26000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	26000	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	26000	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	26000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	26000	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	26000	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	26000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	26000	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	25999.99	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	26000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	26000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	26000	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	26000	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	26000	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	26000	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	26000	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	26000	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	26000	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	26000	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	26000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	26000	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	26000	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	26000	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	26000	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	26000	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	26000	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	26000	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	26000	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	26000	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	26000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	26000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	26000	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	26000	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	26000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	26000	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	26000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	26000	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	26000	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	26000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	26000	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	26000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	26000	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	26000	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	26000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	26000	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	26000	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	26000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	26000	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	26000	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	26000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	26000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	26000	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	26000	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	26000	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	26000	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	26000	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	26000	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	26000	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	26000	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	26000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	26000	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	26000	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	26000	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	26000	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	26000	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	26000	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	26000	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	26000	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	26000	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	26000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	26000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	26000	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	26000	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	26000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	26000	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	26000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	26000	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	26000	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	26000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	26000	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	26000	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	26000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	26000	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	26000	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	26000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	26000	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	26000	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	26000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	26000	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	26000	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	26000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	26000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	26000	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	26000	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	26000	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	26000	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	26000	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	26000	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	26000	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	26000	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	26000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	26000	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	26000	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	26000	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	26000	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	26000	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	26000	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	26000	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	26000	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	26000	-
4(Types)	-	26000	-
5(Requirements)	-	26000	-
5.1(Design)	-	26000	-
5.10(consolidation test IS 3400 (Part 5))	-	26000	-
5.2.4(Reinforcing Material)	-	26000	-
5.2.8.4(Colour of the lace)	-	26000	-
5.3, 5.3.1,5.3.3,5.3.4(Construction)	-	26000	-
5.10(Consolidation Test IS 3400 (Part 5) : 1986)	-	26000	-
8(CHEMICAL REQUIREMENTS)	-	26000	-
9, 9.1(BIS CERTIFICATION MARKING)	-	26000	-
10(Marking)	-	26000	-
11(Packing)	-	26000	-
Cl. 5.2.4(Reinforcing Material)	-	26000	-
Cl. 5.2.8.4(Colour of the lace)	-	26000	-
11(PACKING)	-	26000	-
Cl. 5.3(Construction 5.3.1,5.3.3,5.3.4)	-	26000	-
10(Marking)	-	26000	-
7.1(Resistance to fuel)	-	26000	-
7.2(Resistance to electricity)	-	26000	-
9, 9.1(BIS CERTIFICATION MARKING)	-	26000	-
Cl. 8 (IS 17011, Table-1 (i))(Allergenic and carcinogenic disperse dyes)	-	26000	-
Cl-8 (IS 17011, Table-1 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	26000	-
Cl-8 (IS 17011, Table-1 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	26000	-
Cl-8(IS 17011, Table-1 (iv)(Chromium (VI))	-	26000	-
Cl-8 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	26000	-
Cl-8 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	26000	-
Cl-8 (IS 17011, Table-1 (vii)(Formaldehyde)	-	26000	-
Cl-8(IS 17011, Table-1 (viii)(Organotin compounds)	-	26000	-
Cl-8 (IS 17011, Table-1 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	26000	-
Cl-8 (IS 17011, Table-1 (x)(pH)	-	26000	-
Cl-8 (IS 17011, Table-1 (xi)(Phthalates (each individual phthalate))	-	26000	-
Cl-8 (IS 17011, Table-1 (xii)(Nickel, on skin contact)	-	26000	-
Cl- 5.2.8.1 (Amendment No. 2)(General)	-	26000	-
Cl- 5.2.8.2 (Amendment No. 2)(Internal length of toecap)	-	26000	-
Cl- 5.2.8.3 (Amendment No. 2)(Corrosion resistance)	-	26000	-
Cl- 5.2.9.5 (Amendment No. 2)(Breaking load and tag retention)	-	26000	-
Cl- 5.2.9.6.1 (Amendment No. 2)(Abrasion resistance- Lace to lace)	-	26000	-
Cl- 5.2.9.6.2 (Amendment No. 2)(Abrasion resistance- Lace to eyelet)	-	26000	-
Cl- 5.2.10 (Amendment No. 2)(Force required to pull out the eyelets)	-	26000	-
Cl- 5.2.12.1 (Amendment No. 2)(Insole- Material and thickness)	-	26000	-
Cl- 5.2.12.2 (Amendment No. 2)(Insole- Abrasion resistance)	-	26000	-
Cl- 5.2.12.3 (Amendment No. 2)(Insole- Water absorption and desorption)	-	26000	-
Cl- 5.2.13.1 (Amendment No. 2)(Insock- Abrasion resistance)	-	26000	-
Cl- 5.2.13.2 (Amendment No. 2)(Insock- Water absorption and desorption)	-	26000	-

-
-

IS 9873 : Part 1 (2025)

SAFETY OF TOYS PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (Fifth Revision)

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1,4.1.1 &4.1.2 -5.1 to 5.23(General)	-	4399.99	-
4.2-5.24.2(Reasonably foreseeable abuse, Drop test)	-	4400	-
4.2-5.24.3(Reasonably foreseeable abuse, Tip-over test for large and bulky toys)	-	4400	-
4.2-5.24.4(Reasonably foreseeable abuse, Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	4400	-
4.2-5.24.5(Reasonably foreseeable abuse, Torque test)	-	4400	-
4.2-5.24.6.1(Reasonably foreseeable abuse, Tension test (General))	-	4400	-
4.2-5.24.6.2(Reasonably foreseeable abuse, Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	4400	-
4.2-5.24.6.3(Reasonably foreseeable abuse, Tension test for pompoms)	-	4400	-
4.2-5.24.6.4(Reasonably foreseeable abuse, Tension test for protective components)	-	4400	-
4.2-5.24.6.5(Reasonably foreseeable abuse, Tension test for a projectile with a suction cup)	-	4400	-
4.2-5.24.6.6(Reasonably foreseeable abuse, Perpendicular Tension test for rotor blades)	-	4400	-
4.2-5.24.6.7(Reasonably foreseeable abuse, Tension test for rotor blades)	-	4400	-
4.2-5.24.7(Reasonably foreseeable abuse, Compression test)	-	4400	-
4.2-5.24.8(Reasonably foreseeable abuse, Flexure test)	-	4400	-
4.3, 4.3.1(Material , Material quality)	-	4400	-
4.3.2 -5.21(Expanding materials,)	-	4400	-
4.4 , 4.4.1 -5.24.2(Small parts(for children under 36 months) Drop test)	-	4400	-
4.4 , 4.4.1 -5.24.3(Small parts(for children under 36 months) , Tip-over test for large and bulky toys)	-	4400	-
4.4 , 4.4.10-5.24.4(Small parts(for children under 36 months) , Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	4400	-
4.4 , 4.4.1 -5.24.5(Small parts(for children under 36 months) , Torque test)	-	4400	-
4.4 , 4.4.1-5.24.6.1(Small parts(for children under 36 months) , Tension test (General))	-	4400	-
4.4 , 4.4.1-5.24.6.2(Small parts(for children under 36 months) , Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	4400	-
4.4 , 4.4.1-5.24.6.3(Small parts(for children under 36 months) , Tension test for pompoms)	-	4400	-
4.4 , 4.4.1-5.24.6.4(Small parts(for children under 36 months) , Tension test for protective components)	-	4400	-
4.4 , 4.4.1-5.24.6.5(Small parts(for children under 36 months) , Tension test for a projectile with a suction cup)	-	4400	-
4.4 , 4.4.1-5.24.6.6(Small parts(for children under 36 months) , Perpendicular Tension test for rotor blades)	-	4400	-
4.4 , 4.4.1-5.24.6.7(Small parts(for children under 36 months) , Tension test for rotor blades)	-	4400	-
4.4 , 4.4.1-5.24.7(Small parts(for children under 36 months) , Compression test)	-	4400	-
4.4 , 4.4.1(Small parts(for children under 36 months) , Flexure test)	-	4400	-
4.4 , 4.4.1-5.2(Small parts(for children under 36 months) , Small parts test)	-	4400	-
4.4 , 4.4.2-5.2(Small parts(for children 36 months and over but under 72 months) , Small parts test)	-	4400	-
4.5,4.5.1 & 4.5.1.2 -5.3(Shape, size & strength of certain toys(Squeeze toys,rattles & certain other toys & components of toys), Test for shape & size of certain toys)	-	4400	-
4.5 ,4.5.1 & 4.5.1.3-5.3(Shape, size & strength of certain toys(Other toys or components of toys with nearly spherical,hemispherical,circular flared or dome-shaped ends of toys having a mass less than 0.5 kg & intended for children under 18 months), Test for shape & size of certain toys)	-	4400	-
4.5 ,4.5.1 & 4.5.1.4-5.3(Shape, size & strength of certain toys (Toys fasteners(e.g.nails ,bolts ,screws & pegs) with nearly spherical, hemispherical or dome-shaped ends intended for children 18 months & over but under 48 months), Test for shape & size of certain toys)	-	4400	-
4.5 ,4.5.2-5.4(Small balls (for children under 36 months), Small balls test)	-	4400	-
4.5 ,4.5.2(Small balls (for children 36 months and over but under 96 months), Warning)	-	4400	-
4.5 ,4.5.3-5.24.6.3(Pompoms (for children under 36 months), Tension test for pompoms)	-	4400	-
4.5 ,4.5.3-5.5(Pompoms (for children under 36 months), Test for pompoms)	-	4400	-
4.5 ,4.5.4-5.6(Pre-school play figures(for children under 36 months), Test for pre-school play figures)	-	4400	-
4.5 ,4.5.5(Toys pacifiers (for children under 36 months), Nipple length)	-	4400	-
4.5 ,4.5.6-5.10(Balloons, Determination of thickness of plastic film & sheeting (Individual thickness))	-	4400	-
4.5 ,4.5.6-5.10(Balloons, Determination of thickness of plastic film & sheeting (Average thickness))	-	4400	-
4.5 ,4.5.6-5.2(Balloons, Small part test)	-	4400	-
4.5 ,4.5.6-5.24.5(Balloons, Torque test)	-	4400	-
4.5 ,4.5.6-5.24.6.1(Balloons, Tension test)	-	4400	-
4.5 ,4.5.6(Balloons, Warning)	-	4400	-
4.5,4.5.7-5.24.2(Marbles, Drop test)	-	4400	-
4.5,4.5.7-5.24.3(Marbles, Tip-over test for large and bulky toys)	-	4400	-
4.5,4.5.7-5.24.4(Marbles, Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	4400	-
4.5,4.5.7-5.24.5(Marbles, Torque test)	-	4400	-
4.5,4.5.7-5.24.6.1(Marbles, Tension test (General))	-	4400	-
4.5,4.5.7-5.24.6.2(Marbles, Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	4400	-
4.5,4.5.7-5.24.6.3(Marbles, Tension test for pompoms)	-	4400	-
4.5,4.5.7 -5.24.6.4(Marbles, Tension test for protective components)	-	4400	-
4.5,4.5.7-5.24.6.5(Marbles, Tension test for a projectile with a suction cup)	-	4400	-
4.5,4.5.7-5.24.6.6(Marbles, Perpendicular Tension test for rotor blades)	-	4400	-
4.5,4.5.7-5.24.6.7(Marbles, Tension test for rotor blades)	-	4400	-
4.5,4.5.7-5.24.7(Marbles, Compression test)	-	4400	-
4.5,4.5.7-5.24.8(Marbles, Flexure test)	-	4400	-
4.5,4.5.7(Marbles, Warning)	-	4400	-
4.5,4.5.8 (a)(Hemispheric-shaped toys, Number of opening)	-	4400	-
4.5,4.5.8(a)(Hemispheric-shaped toys, Opening distance from the rim)	-	4400	-
4.5,4.5.8(a)(Hemispheric-shaped toys, Two opening position)	-	4400	-
4.5,4.5.8(b)(Hemispheric-shaped toys, Rib-through-cup centre)	-	4400	-
4.5,4.5.8(c)(Hemispheric-shaped toys, Number of opening)	-	4400	-
4.5,4.5.8(c)(Hemispheric-shaped toys, Opning located from the rim)	-	4400	-
4.5,4.5.8(c)(Hemispheric-shaped toys, Apart measured along the outside contour)	-	4400	-
4.5,4.5.8(d)(Hemispheric-shaped toys, Repeated scalloped-edge pattern around the entire rim)	-	4400	-
4.5,4.5.8(d)(Hemispheric-shaped toys, Max distance between centre lines of adjacent peaks)	-	4400	-
4.5,4.5.8(d)(Hemispheric-shaped toys, Minimum depth)	-	4400	-
4.6, 4.6.1-5.8(Edges, (Accessible sharp edges of glass or metal) Sharp-edge test)	-	4400	-
4.6, 4.6.2(a)(Edges, (Functional sharp egdes for children under 36 months))	-	4400	-
4.6, 4.6.2(b)(Edges, (Functional sharp egdes for children 36 months & over but under 96 months))	-	4400	-
4.6, 4.6.3-5.8(Edges, (Edges on metal toys for children under 96 months) , Sharp-edge test)	-	4400	-
4.6, 4.6.4(Edges, (Edges on moulded toys for children under 96 months) ,)	-	4400	-
4.6, 4.6.5-5.24.7(Edges, (Edges on exposed bolts or threaded rods) , Compression test)	-	4400	-
4.6, 4.6.5-5.24.5(Edges, (Edges on exposed bolts or threaded rods) , Torque test)	-	4400	-
4.6, 4.6.5-5.24.6.1(Edges, (Edges on exposed bolts or threaded rods) , Tension test)	-	4400	-
4.6, 4.6.5(Edges, (Edges on exposed bolts or threaded rods) ,)	-	4400	-
4.7, 4.7.1(a)-5.9(Points (Accessible sharp points), Sharp-Point test)	-	4400	-
4.7, 4.7.2(a)(Functional sharp points (for children under 36 months))	-	4400	-
4.7, 4.7.2(b)(Functional sharp points(for children 36 months & over but under 96 months), Warning)	-	4400	-
4.7, 4.7.3(Wooden toys)	-	4400	-
4.8 ,4.8.1-5.24.2(Projections(General requirements), Drop test)	-	4400	-
4.8 ,4.8.1-5.24.3(Projections(General requirements), Tip-over test for large and bulky toys)	-	4400	-
4.8 ,4.8.1-5.24.4(Projections(General requirements), Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	4400	-
4.8 ,4.8.1-5.24.5(Projections(General requirements), Torque test)	-	4400	-
4.8 ,4.8.1-5.24.6.1(Projections(General requirements), Tension test (General))	-	4400	-
4.8 ,4.8.1-5.24.6.2(Projections(General requirements), Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	4400	-
4.8 ,4.8.1-5.24.6.3(Projections(General requirements), Tension test for pompoms)	-	4400	-
4.8 ,4.8.1-5.24.6.4(Projections(General requirements), Tension test for protective components)	-	4400	-
4.8 ,4.8.1-5.24.6.5(Projections(General requirements), Tension test for a projectile with a suction cup)	-	4400	-
4.8 ,4.8.1-5.24.6.6(Projections(General requirements), Perpendicular Tension test for rotor blades)	-	4400	-
4.8 ,4.8.1-5.24.6.7(Projections(General requirements), Tension test for rotor blades)	-	4400	-
4.8 ,4.8.1-5.24.7(Projections(General requirements), Compression test)	-	4400	-
4.8 ,4.8.1-5.24.8(Projections(General requirements), Flexure test)	-	4400	-
4.9(a)-5.24.8.2(Metal wires and rods, Flexure test(wires & other metallic components intended to be bent))	-	4400	-
4.9(b)-5.24.8.3(Metal wires and rods, Flexure test(wires likely to be bent))	-	4400	-
4.9(c) -5.24.6.4(Metal wires and rods, Tension test for protective components)	-	4400	-
4.9(c) -5.8(Metal wires and rods, Sharp-edge test)	-	4400	-
4.9(c) -5.9(Metal wires and rods, Sharp-point test)	-	4400	-
4. 10 -5.10(Plastic film or plastic bags in packaging and in toys, Determination of thickness of plastic film and sheeting(Individual thickness))	-	4400	-
4. 10 -5.10(Plastic film or plastic bags in packaging and in toys, Determination of thickness of plastic film and sheeting(Average thickness))	-	4400	-
4.11.2 ,4.11.2.1(a)-5.11.2(Cords in toys intended for children under 18 months (Cords with the potential to tangle)- Length of cords & electrical cable)	-	4400	-
4.11.2 ,4.11.2.1(b)-5.11.3(Cords in toys intended for children under 18 months (Cords with the potential to tangle)- Breakway feature separation test)	-	4400	-
4.11.2 ,4.11.2.2 -5.11.2(Cords in toys intended for children under 18 months (Other cords)- Length of cords & electrical cable)	-	4400	-
4.11.3 ,4.11.3.1(a)-5.11.2(Cords in toys intended for children 18 months & over but under 36 months cords with the potential to tangle)- Length of cords & electrical cable)	-	4400	-
4.11.3 ,4.11.3.1(b)-5.11.3(Cords in toys intended for children 18 months & over but under 36 months cords with the potential to tangle)- Breakway feature separation test)	-	4400	-
4.11.3 ,4.11.3.2 -5.11.2(Cords in toys intended for children 18 months & over but under 36 months Other cords)- Length of cords & electrical cable)	-	4400	-
4.11.3 ,4.11.3.2(Cords in toys intended for children 18 months & over but under 36 months Other cords)- Warning)	-	4400	-
4.11.3 ,4.11.3.3 -5.11.2(Cords in toys intended for children 18 months & over but under 36 months Other cords without a free end)- Length of cords & electrical cable)	-	4400	-
4.11.3 ,4.11.3.3(Cords in toys intended for children 18 months & over but under 36 months Other cords without a free end)- Warning)	-	4400	-
4.11.4(a)-5.11.4(Fixed loops and nooses intended for children under 36 months- Test for fixed loops and nooses)	-	4400	-
4.11.4(b)-5.11.3(Fixed loops and nooses intended for children under 36 months- Breakway feature separation test)	-	4400	-
4.11.5 -5.11.2(Cords on pull toys - Length of cords & electrical cables)	-	4400	-
4.11.6(Electrical cables- Warning)	-	4400	-
4.11.7- 5.11.1(Diameter of certain cords intended for children under 36 months- Cord cross-sectional dimension)	-	4400	-
4.11.8- 5.11.5(Self-retracting cords intended for children under 36 months- Self-retracting cords)	-	4400	-
4.11.9.1(Toys intended to be strung across a cradle,cot ,perambulator or carriage- Warning & instruction)	-	4400	-
4.11.9.2(Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage or intended to be suspended over a cot from a wall or ceiling- Warning & instruction)	-	4400	-
4.11.10(Cords on toy bags)	-	4400	-
4.11.11 -5.11.6(Cords, strings & lines for flying toys- Electrical resistance of cords)	-	4400	-
4.11.11 -5.11.6(Cords, strings & lines for flying toys- Warning)	-	4400	-
4.12, 4.12.1(a)(Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)- Number of main locking device & locking device which automatikally engages)	-	4400	-
4.12, 4.12.1-5.22.2(Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)- Toys puchchairs & perambulators)	-	4400	-
4.12, 4.12.1(Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)-- If the toys comprises two locking devices)	-	4400	-
4.12, 4.12.1(b)(Toy pushchairs,perambulators & similar toys(Toy pushchairs & perambulators that do not present a hazard of a handle or other structural member folding down over a child)- Number of locking device or safety stop)	-	4400	-
4.12, 4.12.1(b)(Toy pushchairs,perambulators & similar toys(Toy pushchairs & perambulators that do not present a hazard of a handle or other structural member folding down over a child)- Toys puchchairs & perambulators)	-	4400	-
4.12, 4.12.2(a)(Other toys with folding mechanism(Play furniture & other toys in which a folding mechanism,armor brace)- Other toys with folding mechanisms)	-	4400	-
4.12, 4.12.2(b)(Other toys with folding mechanism(Play furniture & other toys in which a folding mechanism,armor brace)- Adequate clearance between moving parts)	-	4400	-
4.12 ,4.12.3(Hinge-line clearance- Gap or clearance along the hinge line between a stationary portion and a movable portion)	-	4400	-
4.13 ,4.13.1(Circular holes in rigid materials for children under 60 months- Circular hole clearance)	-	4400	-
4.13 ,4.13.2(Accessible clearances for movable segments-)	-	4400	-
4.13 ,4.13.3 -5.7(Chains or belts in ride-on toys- Accessibility of a part or component)	-	4400	-
4.13. ,4.13.4(Other driving mechanisms)	-	4400	-
4.13 ,4.13.5(Winding keys for children under 36 months- Clearance)	-	4400	-
4.14(a)(Springs - Gap between two consecutive spirals)	-	4400	-
4.14(b)(Springs - Gap between two consecutive extension helical)	-	4400	-
4.14(c)(Springs - Gap between two consecutive compression helical)	-	4400	-
4.15.1.2-5.12.2(Sideways stability,feet available for stabilization - Sideways stability test,feet available for stabilization)	-	4400	-
4.15.1.3-5.12.3(Sideways stability,feet unavailable for stabilization - Sideways stability test,feet unavailable for stabilization)	-	4400	-
4.15.1.4-5.12.4(Fore & aft stability - Fore & aft stability test)	-	4400	-
4.15.2-5.12.5(Overload requirements for ride-on toys & seats- Overload test for ride-on toys & seats)	-	4400	-
4.15.2-5.24.4(Overload requirements for ride-on toys & seats- Dynamic strength test for wheeled ride -on toys other than toy scooter)	-	4400	-
4.15.3-5.12.6(Stability of stationary floor toys- Stability test of stationary floor toys)	-	4400	-
4.16, 4.16.1(Enclosures(Ventilation)- volume)	-	4400	-
4.16, 4.16.1(Enclosures(Ventilation)- All internal dimensions)	-	4400	-
4.16, 4.16.1(Enclosures(Ventilation)- opening /ventilation)	-	4400	-
4.16, 4.16.1(Enclosures(Ventilation)- Each opening area)	-	4400	-
4.16, 4.16.1(Enclosures(Ventilation)- Two group of opening :each group)	-	4400	-
4.16.2 , 4.16.2.1-5.13.1(Closures(Lid, doors & similar devices)- Closures)	-	4400	-
4.16.2 , 4.16.2.2(a)-5.13.2.2(Lid support for toy chests & similar toys- Lid support)	-	4400	-
4.16.2 , 4.16.2.2(a)-5.13.2.3(Lid support for toy chests & similar toys- Durability test for toy chest-lids)	-	4400	-
4.16.2 , 4.16.2.2(b)-5.13.2.3(Lid support for toy chests & similar toys- Durability test for toy chest-lids)	-	4400	-
4.16.2 , 4.16.2.2(c(Lid support for toy chests & similar toys-)	-	4400	-
4.16.3(Toys that enclose the head - Ventilation,opening)	-	4400	-
4.16.3(Toys that enclose the head - Each opening area)	-	4400	-
4.16.3(Toys that enclose the head - Two group of opening :each group)	-	4400	-
4.17 -5.14(Item that cover the face and simulated protective equipment- Impact test for toys that cover the face)	-	4400	-
4.18.2(a)-5.36(Projectiles(projectile toy)- Tip assessment of rigid projectiles)	-	4400	-
4.18.2(b)(Projectiles(projectile toy)- Leading edges)	-	4400	-
4.18.2(c)(Projectiles(projectile toy)- corner of the projectile)	-	4400	-
4.18.2(d)- 5.37(Projectiles(projectile with suction sup)- Length of suction cup projectile)	-	4400	-
4.18.2(d)-5.24.5(Projectiles(projectile with suction sup)- Torque test)	-	4400	-
4.18.2(d)-5.24.6.5(Projectiles(projectile with suction sup)- Tension test for a projectile with a suction cup)	-	4400	-
4.18.2(e)-5.24.5(Projectiles(projectile with suction sup)- Torque test)	-	4400	-
4.18.2(e)-5.24.6.5(Projectiles(projectile with suction sup)- Tension test for a projectile with a suction cup)	-	4400	-
4.18.2(e)-5.4(Projectiles(projectile with suction sup)- Small balls test)	-	4400	-
4.18.3(a) -5.2(Projectile toys with stored energy - Small part test)	-	4400	-
4.18.3(a) -5.24.2(Projectile toys with stored energy - Drop test)	-	4400	-
4.18.3(a) -5.24.3(Projectile toys with stored energy - Tip-over test for large and bulky toys)	-	4400	-
4.18.3(a) -5.24.4(Projectile toys with stored energy - Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	4400	-
4.18.3(a) -5.24.5(Projectile toys with stored energy - Torque test)	-	4400	-
4.18.3(a) -5.24.6.1(Projectile toys with stored energy - Tension test (General))	-	4400	-
4.18.3(a) -5.24.6.2(Projectile toys with stored energy - Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	4400	-
4.18.3(a) -5.24.6.3(Projectile toys with stored energy - Tension test for pompoms)	-	4400	-
4.18.3(a) -5.24.6.4(Projectile toys with stored energy - Tension test for protective components)	-	4400	-
4.18.3(a) -5.24.6.5(Projectile toys with stored energy - Tension test for a projectile with a suction cup)	-	4400	-
4.18.3(a) -5.24.6.6(Projectile toys with stored energy - Perpendicular Tension test for rotor blades)	-	4400	-
4.18.3(a) -5.24.6.7(Projectile toys with stored energy - Tension test for rotor blades)	-	4400	-
4.18.3(a) -5.24.7(Projectile toys with stored energy - Compression test)	-	4400	-
4.18.3(a) -5.24.8(Projectile toys with stored energy - Flexure test)	-	4400	-
4.18.3(a)-5.15.2(Projectile toys with stored energy - Wall impact test for projectiles)	-	4400	-
4.18.3(b)-5.15.1(Projectile toys with stored energy - Kinetic energy of projectiles)	-	4400	-
4.18.3(b)-5.15.1(Projectile toys with stored energy - Contact surface risilient material)	-	4400	-
4.18.3(b)-5.15.1(Projectile toys with stored energy - Instructions)	-	4400	-
4.18.3(b)-5.15.1.3.3(Projectile toys with stored energy - Determination of kinetic energy per area of contact)	-	4400	-
4.18.3(c)-5.24.5(Projectile toys with stored energy - Torque test)	-	4400	-
4.18.3(c)-5.24.6.4(Projectile toys with stored energy - Tension test for protective components)	-	4400	-
4.18.3(d)-5.15.2(Projectile toys with stored energy - Wall impact test for projectiles)	-	4400	-
4.18.4.2-5.20(Projectiles toys without stored energy(Mouth-actuated projectile toys)- Durability of mouth-actuated toys)	-	4400	-
4.18.4.3(a)(Projectiles toys without stored energy(Projectile in the form of a dart)- Contact area of the dart)	-	4400	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a protective cap)	-	4400	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a blunted front end)	-	4400	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a blunted front end)	-	4400	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart made of resilient material)	-	4400	-
4.18.4.3(c)- 5.24.5(Projectiles toys without stored energy(Projectile in the form of a dart)- Torque test)	-	4400	-
4.18.4.3(c)- 5.24.6.4(Projectiles toys without stored energy(Projectile in the form of a dart)- Tension test for protective component)	-	4400	-
4.18.4.4- 5.15.1.3.3(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Determination of kinetic energy per area of contact)	-	4400	-
4.18.4.4- 5.15.2(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Wall impact test for projectiles)	-	4400	-
4.18.4.4(a)(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow have a protective cap)	-	4400	-
4.18.4.4(b)(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow have a blunted front end)	-	4400	-
4.18.4.4(c)(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow made of resilient material)	-	4400	-
4.18.4.4-5.24.5(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Torque test)	-	4400	-
4.18.4.4-5.24.6.4(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Tension test for protective components)	-	4400	-
4.19,4.19.1 -5.36(Flying toys (General) - Tip assessment of rigid projectiles)	-	4400	-
4.19.2(a)(Rotor blades on flying toys)	-	4400	-
4.19.2(b) -5.24.6.6(Rotor blades on flying toys - Perpendicular tension test for rotor blades)	-	4400	-
4.19.2(c)(Rotor blades on flying toys)	-	4400	-
4.19.2(d)(Rotor blades on flying toys)	-	4400	-
4.19.2(d)(Rotor blades on flying toys)	-	4400	-
4.19.3(a)(Rotor blades on remote-controlled flying toys)	-	4400	-
4.19.3(b)-5.24.6.7(Rotor blades on remote-controlled flying toys - Tension test for rotor blades)	-	4400	-
4.2 0(a-c)(Aquatic toys)	-	4400	-
4.2 0(d)(Aquatic toys - Stopper)	-	4400	-
4.21(a)-5.16.1(Braking - Determination of freewheeling facility)	-	4400	-
4.21(a)-5.16.2(Braking - Braking performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	4400	-
4.22.1(Toys bicycles (General)- Warning)	-	4400	-
4.22.2(Toys bicycles - Instruction for use)	-	4400	-
4.22.3(Toys bicycles - Determination of maximum saddle height)	-	4400	-
4.22.4 -5.16.1(Toys bicycles (Braking requirements)- Determination of freewheeling facility)	-	4400	-
4.22.4(Toys bicycles (Braking requirements)- Brake lever dimension ,d)	-	4400	-
4.22.4(Toys bicycles (Braking requirements)- lever length)	-	4400	-
4.22.4 -5.16.3(Toys bicycles (Braking requirements)- Brake performance for toy bicycles)	-	4400	-
4.23-5.17(Speed limitation of electrically driven ride-on toys for children under 3 years- Determination of speed of electrically driven ride-on toys)	-	4400	-
4.23-5.17(Speed limitation of electrically driven ride-on toys for children 3 years & over & under 6 years- Determination of speed of electrically driven ride-on toys)	-	4400	-
4.23-5.17(Speed limitation of electrically driven ride-on toys for children 6 years & over- Determination of speed of electrically driven ride-on toys)	-	4400	-
4.24(a) -5.18(Toys containing a heat source- Ignition)	-	4400	-
4.24(b) -5.18(Toys containing a heat source(Part made of metal handle,knob &similar parts)- Determination of temperature increases)	-	4400	-
4.24(b) -5.18(Toys containing a heat source(Part made Of glass or porcelain handle,knob &similar parts)- Determination of temperature increases)	-	4400	-
4.24(b) -5.18(Toys containing a heat source(Part made Of plastic or wood handle,knob &similar parts)- Determination of temperature increases)	-	4400	-
4.24(c) -5.18(Toys containing a heat source(Part made Of metal other accessible parts of the toy)- Determination of temperature increases)	-	4400	-
4.24(c) -5.18(Toys containing a heat source(Part made Of other material other accessible parts of the toy)- Determination of temperature increases)	-	4400	-
4.25 -5.19(Liquid -filled toys - Leakage of liquid-filled toys)	-	4400	-
4.25 -5.19(Liquid -filled toys - Instruction)	-	4400	-
4.26(a) -5.2(Mouth-actuated toys- Small part test)	-	4400	-
4.26(b) -5.24.5(Mouth-actuated toys- Torque test)	-	4400	-
4.26(b) -5.24.6.1(Mouth-actuated toys- Tension test)	-	4400	-
4.26(b) -5.2(Mouth-actuated toys- Small part test)	-	4400	-
4.26(c) -5.20(Mouth-actuated toys- Durability of mouth-actuated toys)	-	4400	-
4.26(c) -5.2(Mouth-actuated toys- Small part test)	-	4400	-
4.26(d) -5.2(Mouth-actuated toys- Small part test)	-	4400	-
4.26(d) -5.24.5(Mouth-actuated toys- Torque test)	-	4400	-
4.26(d) -5.24.6.1(Mouth-actuated toys- Tension test)	-	4400	-
4.27(Toy roller skates,toy inline skates and toy skatesboards - Warning)	-	4400	-
4.28(Percussion caps specifically designed for use in toys- Warning)	-	4400	-
4.29(a) 5.25(Acoustic requirements - Determination of sound pressure levels(LpAeq))	-	4400	-
4.29(b) 5.25(Acoustic requirements - Determination of sound pressure levels(LAFmax))	-	4400	-
4.29(c) 5.25(Acoustic requirements - Determination of sound pressure levels(LAFmax))	-	4400	-
4.29(d) 5.25(Acoustic requirements - Determination of sound pressure levels(LpAeq))	-	4400	-
4.29(e) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	4400	-
4.29(f) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	4400	-
4.29(g) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	4400	-
4.29(h) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	4400	-
4.29(h) 5.25(Acoustic requirements - Warning)	-	4400	-
4.30 ,4.30.1(Toys scooters - General)	-	4400	-
4.30.2(Toys scooters - Warning & instructions for use)	-	4400	-
4.30.3 -5.26(Toys scooters (Strength) - Static strength for toy scooters)	-	4400	-
4.30.3 -5.27(Toys scooters (Strength) - Dynamic strength for toy scooters)	-	4400	-
4.30.3 -5.8(Toys scooters (Strength) - Sharp-edge test)	-	4400	-
4.30.3 -5.9(Toys scooters (Strength) - Sharp-point test)	-	4400	-
4.30.3 -5.29(Toys scooters (Strength) - Strength of toy scooter steering tubes)	-	4400	-
4.30.4 -5.12.2(Toys scooters (Stability) - Sideways stability test,feet available for stabilization)	-	4400	-
4.30.5(Toys scooters (Adjustable & folding steering tubes and handlebars) -)	-	4400	-
4.30.6 -5.28(Toys scooters(Braking) - Brake performance for toy scooters)	-	4400	-
4.30.7(Toys scooters - Wheel size)	-	4400	-
4.30.8(Toys scooters (Projections) - Handlebars on toy scooters)	-	4400	-
4.30.8(Toys scooters (Projections) - Diameter of handlebar)	-	4400	-
4.31.2(Magnetic or electrical experimental sets intended for children 8 years & over- Warning)	-	4400	-
4.31.3(a) -5.32(All other toys with magnets & magnetic components - Magnetic flux index)	-	4400	-
4.31.3(a) -5.2(All other toys with magnets & magnetic components - Small part test)	-	4400	-
4.31.3(b) -5.34(All other toys with magnets & magnetic components(wooden toys) - Soaking test for magnets)	-	4400	-
4.31.3(c) -5.32(All other toys with magnets & magnetic components Magnetic flux index)	-	4400	-
4.31.3(c) -5.2(All other toys with magnets & magnetic components - Small part test)	-	4400	-
4.31.3(c) -5.31(All other toys with magnets & magnetic components - Tension test for magnets)	-	4400	-
4.31.3(c) -5.24.2(All other toys with magnets & magnetic components - Drop test)	-	4400	-
4.31.3(c) -5.24.3(All other toys with magnets & magnetic components - Tip-over test for large & bulky toys)	-	4400	-
4.31.3(c) -5.24.5(All other toys with magnets & magnetic components - Torque test)	-	4400	-
4.31.3(c) -5.24.6.2(All other toys with magnets & magnetic components - Tension test for seams in soft-filled toys, beanbag-type toys &other similarfilled toys)	-	4400	-
4.31.3(c) -5.24.6.1(All other toys with magnets & magnetic components - Tension test)	-	4400	-
4.31.3(c) -5.33(All other toys with magnets & magnetic components - Impact test for magnets)	-	4400	-
4.31.3(c) -5.24.7(All other toys with magnets & magnetic components - Compression test)	-	4400	-
4.31.3(c) -5.31(All other toys with magnets & magnetic components - Tension test for magnets)	-	4400	-
4.32 -5.38.2(Yo-yo balls - Measurement of initial length,lo)	-	4400	-
4.32 -5.38.1(Yo-yo balls - Measurement of elastic constant,k)	-	4400	-
4.33 -5.11.3(Staps intended to be worn fully or partially around the neck for children under 36 months - Breakaway feature separation test)	-	4400	-
4.34(Sledges and toboggans with cords for pulling - Warning)	-	4400	-
4.35,4.35.2,4.35.3 -5.39(Jaw entrapment in handles and steering wheels for children under 18 months - Jaw entrapment test)	-	4400	-
4.36, 4.36.1(Assembly (General))	-	4400	-
4.36.2(Toys intended to be assembled by a child)	-	4400	-
4.36.3(Toys intended to be assembled by an adult)	-	4400	-
4.36.4(Toys that are intended to be disassembled between uses)	-	4400	-
4.37(Functional toys)	-	4400	-
4.38(Toys intended to come into contact with food)	-	4400	-
4.39 -5.2(Inflatable toys - Small part test)	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Selenium (Se))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Mercury (Hg))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Lead (Pb))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Chromium (Cr))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Cadmium (Cd))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Barium (Ba))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Arsenic (As))	-	4400	-
9873 (Part - 3) Cl 4.1 - Table 1(Antimony (Sb))	-	4400	-
9873 (Part - 9) Cl 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP))	-	4400	-
9873 (Part - 9) Cl 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP))	-	4400	-

-
-

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

ALL

39500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7, Table 20("Marking ")	-	39500	-
Cl 5.2.2, Table 4(" Height of upper ")	-	39500	-
Cl 5.2.3(Heel area)	-	39500	-
Cl 5.3.1.1(Construction of whole footwear)	-	39500	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	39500	-
Cl 5.3.2.1(Toe protection - general)	-	39500	-
Cl 5.3.2.2(Internal length)	-	39500	-
Cl 5.3.2.3(Width of toecap flange)	-	39500	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	39500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	39500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	39500	-
Cl 5.3.2.6(Impact resistance)	-	39500	-
Cl 5.3.2.7(Compression resistance)	-	39500	-
Cl 5.3.3(Leak proofness)	-	39500	-
Cl 5.3.4("Specific ergonomic features ")	-	39500	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	39500	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	39500	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	39500	-
Cl 5.3.7(Seam strength)	-	39500	-
Cl 5.3.8(Lead Content ( National Annex A))	-	39500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	39500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	39500	-
Cl 5.4.2(Thickness)	-	39500	-
Cl 5.4.3(Tear strength)	-	39500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	39500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	39500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	39500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	39500	-
Cl 5.4.5(Flexing resistance)	-	39500	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	39500	-
Cl 5.4.7(Resistance to hydrolysis)	-	39500	-
Cl 5.5.2(Lining- Tear strength)	-	39500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	39500	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	39500	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	39500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	39500	-
Cl 5.7.2(Water permeability of insock)	-	39500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	39500	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	39500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	39500	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	39500	-
Cl 5.8.2.2(Cleated area)	-	39500	-
Cl 5.8.2.3(Cleat height)	-	39500	-
Cl 5.8.3(Outsole- Tear strength)	-	39500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	39500	-
Cl 5.8.5(Outsole-Flexing resistance)	-	39500	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	39500	-
Cl 5.8.7(Interlayer bond strength)	-	39500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	39500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	39500	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	39500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	39500	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	39500	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	39500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	39500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	39500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	39500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	39500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	39500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	39500	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	39500	-
Cl 6.2.4(Energy absorption of seat region)	-	39500	-
Cl 6.2.5(Water resistance)	-	39500	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	39500	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	39500	-
Cl 6.2.7(Ankle protection)	-	39500	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	39500	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	39500	-
Cl 6.2.8.3(Resistance to cutting)	-	39500	-
Cl 6.2.9(Scuff cap)	-	39500	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	39500	-
Cl 6.3(Upper — Water penetration and absorption)	-	39500	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	39500	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	39500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	39500	-
Cl 6.4.3.2(Design of Ladder grip)	-	39500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	39500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	39500	-

-
-

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

ALL

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	500	-
Cl-5(Design)	-	400	-
Cl-6(Size and Fittings)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	600	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	700	-
Cl.7.1.3(Complete Shoe Flexing)	-	800	-
Cl.7.1.4(Washability)	-	600	-
Cl.7.1.5(Slip Resistance)	-	700	-
Cl.7.1.6(Heel Drop)	-	500	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	600	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	600	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	500	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	600	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	600	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	600	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	600	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	600	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	600	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	600	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	500	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	500	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	500	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	600	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	600	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	700	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	600	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	700	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	600	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	600	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	500	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	600	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	600	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	600	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	600	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	700	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	700	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	700	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	600	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	700	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	600	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	600	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	600	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	600	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	700	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	700	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	700	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	600	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	700	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	500	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	600	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	700	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	600	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	700	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	700	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	600	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	700	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	600	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	700	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	600	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	600	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	700	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	800	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	800	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	900	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	500	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	800	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	800	-
Cl-7.12.2(PVC is present in sports shoe)	-	700	-
Cl- 8.1(Marking)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	1000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-

-
-

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

ALL

41800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	41800	-
5(DESIGN)	-	41800	-
6(SIZE AND FITTINGS)	-	41800	-
7.1.1(Whole Footwear)	-	41800	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	41800	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	41800	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	41800	-
7.1.5(Energy Absorption at Seat Region)	-	41800	-
7.1.6(Complete Shoe Flexing)	-	41800	-
7.1.7(Washability)	-	41800	-
7.1.8(Slip Resistance)	-	41800	-
7.1.9(Heel Drop)	-	41800	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	41800	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	41800	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	41800	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	41800	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	41800	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	41800	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	41800	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	41800	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	41800	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	41800	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	41800	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	41800	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	41800	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	41800	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	41800	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	41800	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	41800	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	41800	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	41800	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	41800	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	41800	-
7.3 , Table No. 4 , i)(Tear strength,)	-	41800	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	41800	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	41800	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	41800	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	41800	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	41800	-
7.4 , Table No. 5 , i)(Thickness)	-	41800	-
7.4 , Table No. 5 , ii)(Flexing index)	-	41800	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	41800	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	41800	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	41800	-
7.5 , Table No. 6 , i)(Thickness)	-	41800	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	41800	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	41800	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	41800	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	41800	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	41800	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	41800	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	41800	-
7.6 , Table No. 7 , iv)(Tear strength)	-	41800	-
7.6 , Table No. 7 , v)(Tensile strength)	-	41800	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	41800	-
7.6 , Table No. 7 , vii)(Compression set)	-	41800	-
7.7 , Table No. 8 , i)(Compression set)	-	41800	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	41800	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	41800	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	41800	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	41800	-
7.8 , Table No. 9 , ii)(Resilience)	-	41800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	41800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	41800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	41800	-
7.8 , Table No. 9 , v)(Peel strength)	-	41800	-
7.9 , Table No. 10 , i)(Peel strength)	-	41800	-
7.9 , Table No. 10 , ii)(Shear strength)	-	41800	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	41800	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	41800	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	41800	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	41800	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	41800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	41800	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	41800	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	41800	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	41800	-
8(MARKING AND PACKING)	-	41800	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	41800	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	41800	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	41800	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	41800	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	41800	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	41800	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	41800	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	41800	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	41800	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	41800	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	41800	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	41800	-
7.12.2 (Amendment 1)(Lead content)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	41800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	41800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	41800	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	41800	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	41800	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	41800	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	41800	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	41800	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	41800	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	41800	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	41800	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	41800	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	41800	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	41800	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	41800	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	41800	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	41800	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	41800	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	41800	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	41800	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	41800	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	41800	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	41800	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	41800	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	41800	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	41800	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	41800	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	41800	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	41800	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	41800	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	41800	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	41800	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	41800	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	41800	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	41800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	41800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	41800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	41800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	41800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	41800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	41800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	41800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	41800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	41800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	41800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	41800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	41800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	41800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	41800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	41800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	41800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	41800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	41800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	41800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	41800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	41800	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	41800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	41800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	41800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	41800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	41800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	41800	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	41800	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	41800	-

-
-

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

ALL

41800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	300	-
Cl No.4.2(Construction)	-	300	-
Cl No.4.3(Whole Footwear)	-	400	-
4.3.1(Insole)	-	400	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	300	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	400	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	400	-
4.3.6(Energy Absorption at Seat Region)	-	400	-
4.3.7(Complete Shoe Flexing)	-	300	-
4.3.8(Washability)	-	400	-
4.3.9(Slip Resistance)	-	400	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	400	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	400	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	400	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	400	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	500	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	500	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	500	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	400	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	400	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	400	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	400	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	400	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	400	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	400	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	400	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	400	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	400	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	400	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	400	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	500	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	400	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	400	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	400	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	400	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	400	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	400	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	500	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1000	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	1000	-
Cl No . 5(MARKING AND PACKING)	-	300	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	700	-
Clause 4.2 - 4.2.1(Construction)	-	600	-
Clause 4.2 - 4.2.2(Construction)	-	400	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	400	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	400	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	400	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	400	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	400	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	500	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	500	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	500	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	500	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	500	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	500	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	400	-
Clause 4.6, Table 4 i)(Thickness)	-	400	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	500	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	500	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	500	-
Clause 4.7, Table 5 i)(Thickness)	-	400	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	500	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	400	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	400	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	500	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	700	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	700	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	600	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	600	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	700	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	700	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	700	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	700	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	820	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	800	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	700	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1000	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	1100	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	1000	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1000	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	700	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	1000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	1000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1000	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	1000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1000	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	1000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	1000	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	700	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	1000	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1000	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1000	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1000	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	700	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	500	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	400	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	500	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	700	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	600	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	700	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	700	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	500	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	700	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	700	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	500	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1000	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1100	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1100	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1300	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1200	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1100	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1100	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1200	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1200	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1100	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1100	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1200	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1200	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1300	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1300	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1300	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1200	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1100	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1200	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1100	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1200	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1300	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1250	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1200	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	1300	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1200	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1200	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1200	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1300	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1500	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1300	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1300	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1200	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1200	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	1400	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	1400	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	1300	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	1400	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	1400	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	1500	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	1400	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	1500	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	1500	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	1500	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	1400	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	1400	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	1300	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	1400	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	1500	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	1400	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	1500	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	1500	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	1400	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	1500	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	1600	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	1500	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	1500	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	1400	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	1400	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	1500	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	1500	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	1420	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1450	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	1400	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1100	-

-
-

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

ALL

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	39900	-
Cl-5.3(Material)	-	39900	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	39900	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	39900	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	39900	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	39900	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	39900	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	39900	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	39900	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	39900	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	39900	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	39900	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	39900	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	39900	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	39900	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	39900	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	39900	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	39900	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	39900	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	39900	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	39900	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	39900	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	39900	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	39900	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	39900	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	39900	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	39900	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	39900	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	39900	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	39900	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	39900	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	39900	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	39900	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	39900	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	39900	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	39900	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	39900	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	39900	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	39900	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	39900	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	39900	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	39900	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	39900	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	39900	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	39900	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	39900	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	39900	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	39900	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	39900	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	39900	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	39900	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	39900	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	39900	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	39900	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	39900	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	39900	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	39900	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	39900	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	39900	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	39900	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	39900	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	39900	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	39900	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	39900	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	39900	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	39900	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	39900	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	39900	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	39900	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	39900	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	39900	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	39900	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	39900	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	39900	-
Cl-8.1(Marking)	-	39900	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	39900	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	39900	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	39900	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	39900	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	39900	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	39900	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	39900	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	39900	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	39900	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	39900	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	39900	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	39900	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	39900	-
Shoes: Shoes for General Purpose(Organotin: Monobutyltin)	-	39900	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	39900	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	39900	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	39900	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	39900	-
Cl.1.4.1 of IS 17011(DMFU)	-	39900	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	39900	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	39900	-
Cl. No.8.6.1,Table 1 of IS 17011(pH)	-	39900	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	39900	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	39900	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	39900	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	39900	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o- aminoazotoluene)	-	39900	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	39900	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	39900	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	39900	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	39900	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	39900	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	39900	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	39899.97	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	39900	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	39900	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	39900	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	39900	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	39900	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	39900	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	39900	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	39900	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	39900	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	39900	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	39900	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	39900	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	39900	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	39900	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	39900	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	39900	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	39900	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	39900	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	39900	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	39900	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	39900	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	39900	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	39900	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	39900	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	39900	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	39900	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	39900	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	39899.99	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	39900	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	39900	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	39900	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	39900	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	39900	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	39900	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	39900	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	39900	-

-
-

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

ALL

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	1200	-
4.16.2(Breaking Strength of lace )	-	1000	-
4.16.1(Length of lace )	-	1000	-
4.15(D-ring & Hooks )	-	700	-
6.1(Resistance to Fuel Oil)	-	1200	-
4.14.9(Resistance to hot contact )	-	1200	-
4.14.8(Flexing resistance )	-	1200	-
4.14.7(Ageing test)	-	1000	-
4.14.6(Hardness (IRHD))	-	600	-
4.14.5(Abrasion resistance )	-	800	-
4.14.4(Tear Strength)	-	800	-
4.14.3(Sole Density )	-	700	-
4.14.2(Thickness)	-	500	-
4.14.1(Material)	-	500	-
4.13(Breaking Strength of thread )	-	700	-
4.12.2(Tear Strength)	-	900	-
4.12.1(Thickness )	-	500	-
4.11.2(Tear Strength)	-	1000	-
4.11.1(Thickness )	-	500	-
4.10.3(Water absorption & desorption percent)	-	900	-
4.10.2(Abrasion resistance )	-	1000	-
4.10.1(Material)	-	700	-
4.9.3(Water absorption & desorption percent)	-	600	-
4.9.2(Abrasion resistance )	-	700	-
4.9.1(Thickness)	-	500	-
4.8(Thickness Toe puff & counter stiffener)	-	1000	-
4.7.5(Water Vapour permeability & coefficient )	-	1200	-
4.7.4(Abrasion resistance )	-	1000	-
4.7.3(Tear Strength)	-	1000	-
4.7.2(Material Counter & Tongue)	-	1000	-
4.7.1(Material vamp & Quarter)	-	1000	-
4.6.3(Water Penetration and water absorption )	-	1000	-
4.6.2(Tear Strength)	-	1100	-
4.6.1(Thickness )	-	500	-
4.5.8(Energy absorption of seat region )	-	1200	-
4.5.7(Cold Insulation of sole complex)	-	1400	-
4.5.6(Heat Insulation of sole Complex)	-	1400	-
4.5.5(Antistatic test)	-	1400	-
4.5.4(Slip Resitance)	-	1300	-
4.5.3.2(Interayer bond strength)	-	1200	-
4.5.3.1(Upper/outsole bond strength)	-	1300	-
4.5.2(Ergonomic Feature)	-	1200	-
4.5.1(Construction)	-	1000	-
4.4(Height of upper )	-	700	-
4.3.2(Weight)	-	800	-
4.3.1(Size)	-	700	-
4.2(Design )	-	900	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	1400	-
8, 8.1, 8.2, 8.2.1(Marking)	-	500	-
9(Information to be Supplied)	-	1000	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	1200	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	1400	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	1000	-
Cl.9,(Information to be Supplied)	-	1200	-

-
-

IS 14625 (2015)

Plastics Feeding Bottles ( First Revision )

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Physical Requirements)	-	15000	-
Cl 5.1.3(Wall Thickness)	-	15000	-
Cl 5.1.4(Capacity)	-	15000	-
Cl 5.3.2(Transparecy)	-	15000	-
Cl 5.3.3(Leakage Test)	-	15000	-
Cl 5.3.4(Drop Test)	-	15000	-
Cl 5.3.5(Ageing Resistance)	-	15000	-
Cl 5.3.6(Compressive Deformation Resistance)	-	15000	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	15000	-
Cl 5.1.3(Wall Thickness)	-	15000	-
Cl 5.1.4(Capacity)	-	15000	-
Cl 5.3.2(Transparecy)	-	15000	-
Cl 5.3.3(Leakage Test)	-	15000	-
Cl 5.3.4(Drop Test)	-	15000	-
Cl 5.3.5(Ageing Resistance)	-	15000	-
Cl 5.3.6(Compressive Deformation Resistance)	-	15000	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	15000	-
Cl 5.1(Physical Requirements)	-	15000	-
Cl 5.1.3(Wall Thickness)	-	15000	-
Cl 5.1.4(Capacity)	-	15000	-
Cl 5.3.2(Transparecy)	-	15000	-
Cl 5.3.3(Leakage Test)	-	15000	-
Cl 5.3.4(Drop Test)	-	15000	-
Cl 5.3.5(Ageing Resistance)	-	15000	-
Cl 5.3.6(Compressive Deformation Resistance)	-	15000	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Antimony)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Arsenic)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Chromium)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Mercury)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Cadmium)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Lead)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Barium)	-	15000	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Selenium)	-	15000	-
Cl 5.1.4.2 (a)(Test for permanency of Pigment)	-	15000	-
5.3.8 a)(Migration Test a) Distilled water at 40±2° hrs)	-	15000	-
5.3.8 b)(Migration Test b) n-Haptane at 38±1° C for 30 min)	-	15000	-
4.1(Material Identification, Bisphenol A,)	-	15000	-
4.2(Rubber Teats for Feeding bottle shall conform to IS 3565 (Workmanship and Finish, Acetone Extract, Free sulphur in Acetone Extract, Change in Physical property, Properties of Water Extract, pH of the Water Extract, Tension Set ))	-	15000	-
5.1.1(Description, Design, shape & dimensions)	-	15000	-
5.1.2(Manufacture, workmanship finish & appearance)	-	15000	-
5.3.1(Environmental Stress Crack Resistance,)	-	15000	-
Clause 5.3.1(Environmental Stress crack resistance)	-	15000	-
Clause 5.1.4.2(Capacity Scale)	-	15000	-
Clause 5.1.2.2(Workmanship.Finish and Appearance)	-	15000	-
Clause 5.1.1 (Description)	-	15000	-
Clause 4.2 (Teats)	-	15000	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	15000	-
Cl 5.3.6(Compressive Deformation Resistance)	-	15000	-
Cl 5.3.5(Ageing Resistance)	-	15000	-
Cl 5.3.4(Drop Test)	-	15000	-
Cl 5.3.3(Leakage Test)	-	15000	-
Cl 5.3.2(Transparecy)	-	15000	-
Cl 5.1.4(Capacity)	-	15000	-
Cl 5.1.3(Wall Thickness at Top, Middle & Bottom ( Take every position 4 measurment and average will be reported))	-	15000	-
Cl 5.1(Physical Requirements)	-	15000	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	15000	-
Cl 5.1(Physical Requirements)	-	15000	-
Cl 5.1.3(Wall Thickness)	-	15000	-
Cl 5.1.4(Capacity)	-	15000	-
Cl 5.3.2(Transparecy)	-	15000	-
Cl 5.3.3(Leakage Test)	-	15000	-
Cl 5.3.4(Drop Test)	-	15000	-
Cl 5.3.5(Ageing Resistance)	-	15000	-
Cl 5.3.6(Compressive Deformation Resistance)	-	15000	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	15000	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	15000	-
Cl.5.2.1.7, Table-1(i)(Migration of certain elements, Reqiurement as per table 1, Arsenic)	-	15000	-
Cl.5.2.1.7, Table-1(ii)(Migration of certain elements, Reqiurement as per table 1, Chromium)	-	15000	-
Cl.5.2.1.7, Table-1(iii)(Migration of certain elements, Reqiurement as per table 1, Mercury)	-	15000	-
Cl.5.2.1.7, Table-1(iv)(Migration of certain elements, Reqiurement as per table 1, Cadmium)	-	15000	-
Cl.5.2.1.7, Table-1(v)(Migration of certain elements, Reqiurement as per table 1, Lead)	-	15000	-
Cl.5.2.1.7, Table-1(vi)(Migration of certain elements, Reqiurement as per table 1, Barium)	-	15000	-
Cl.5.2.1.7, Table-1(vii)(Migration of certain elements, Reqiurement as per table 1, Selenium)	-	15000	-
Cl.5.3.8(Migration test a)Distilled water)	-	15000	-
Cl.5.3.8(Migration test a)n-Heptane)	-	15000	-
Cl.5.3.9.2, Table-3(i)(Specific migration , Barium)	-	15000	-
Cl.5.3.9.2, Table-3(ii)(Specific migration , Cobalt)	-	15000	-
Cl.5.3.9.2, Table-3(iii)(Specific migration , Copper)	-	15000	-
Cl.5.3.9.2, Table-3(iv)(Specific migration , Iron)	-	15000	-
Cl.5.3.9.2, Table-3(v)(Specific migration , Lithium)	-	15000	-
Cl.5.3.9.2, Table-3(vi)(Specific migration , Manganese)	-	15000	-
Cl.5.3.9.2, Table-3(vii)(Specific migration , Zinc)	-	15000	-
Cl.5.3.9.2, Table-3(viii)(Specific migration , Antimony)	-	15000	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	15000	-
Clause 5.2.1.7, S.No.(i)(Heavy metal,Antimony)	-	15000	-
Clause 5.2.1.7, S.No.(ii)(Heavy metal,Arsenic)	-	15000	-
Clause 5.2.1.7, S.No.(iii)(Heavy metal,Chromium)	-	15000	-
Clause 5.2.1.7, S.No.(iv)(Heavy metal,Mercury)	-	15000	-
Clause 5.2.1.7, S.No.(v)(Heavy metal,Cadmium)	-	15000	-
Clause 5.2.1.7, S.No.(vi)(Heavy metal,Lead)	-	15000	-
Clause 5.2.1.7, S.No.(vii)(Heavy metal,Barium)	-	15000	-
Clause 5.2.1.7, S.No.(viii)(Heavy metal,Selenium)	-	15000	-
Cl-5.2.1.2.2(pH meter)	-	15000	-
Cl-5.2.1.2.3(Membrane filter)	-	15000	-
Cl-5.2.1.2.4(Centrifuge)	-	15000	-
Cl-5.2.1.3(Reagents)	-	15000	-
Cl-5.2.1.3.1(Hydrochloric acid solution)	-	15000	-
Cl-5.2.1.3.2(Hydrochloric acid solution)	-	15000	-
Cl-7(Packing and Marking)	-	15000	-

-
Included w.e.f-15.09.2026

IS 9873 (Part 2) (2025)

SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	2000	-
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2000	-
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2000	-
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	2000	-
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	2000	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2000	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2000	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.4 -5.4(Toys intended to be entered by a child)	-	2000	-
4.4 -5.4(Toys intended to be entered by a child)	-	2000	-
4.4 -5.4(Toys intended to be entered by a child Warning)	-	2000	-
4.5 -5.5(Soft-filled toys)	-	2000	-
4.5 -5.5(Soft-filled toys)	-	2000	-

-
w.e.f. 27.08.2026

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

ALL

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	29000	-
Cl. No.5("SIZE AND FITTINGS ")	-	29000	-
Cl. No.6("CONSTRUCTION ")	-	29000	-
Cl. No.7(MATERIAL)	-	29000	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	29000	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	29000	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	29000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	29000	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	29000	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	29000	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	29000	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	29000	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	29000	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	29000	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	29000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	29000	-
Cl. No.8.4,Table no. 5(i)(Density)	-	29000	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	29000	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	29000	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	29000	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	29000	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	29000	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	29000	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	29000	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	29000	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	29000	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	29000	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	29000	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	29000	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	29000	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	29000	-
Cl. No.9.(MARKING AND PACKING)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	29000	-
Cl. No.8.6.2(Lead content)	-	29000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	29000	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	29000	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	29000	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	29000	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	29000	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	29000	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	29000	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	29000	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	29000	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	29000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	29000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	29000	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	29000	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	29000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	29000	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	29000	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	29000	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	29000	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	29000	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	29000	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	29000	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	29000	-
Cl-10 (Amendment No-1)(Marking)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	29000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	29000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	29000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	29000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	29000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	29000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	29000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	29000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	29000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	29000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	29000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	29000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	29000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	29000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	29000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	29000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	29000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	29000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	29000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	29000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	29000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	29000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	29000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	29000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	29000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	29000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	29000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	29000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	29000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	29000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	29000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	29000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	29000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	29000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	29000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	29000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	29000	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	29000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	29000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	29000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	29000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	29000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	29000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	29000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	29000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	29000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	29000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	29000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	29000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	29000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	29000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	29000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	29000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	29000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	29000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	29000	-

-
-

IS 10116 (2015)

Boric acid - Specification (First Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, 4.3, 4.4, Table 1(Boric acid (as H3BO3 ))	-	7000	-
4.2, 4.3, 4.4, Table 1(Moisture)	-	7000	-
4.2, 4.3, 4.4, Table 1(Water insoluble matter)	-	7000	-
4.2, 4.3, 4.4, Table 1(Heavy metals (as Pb))	-	7000	-
4.2, 4.3, 4.4, Table 1(Iron (as Fe))	-	7000	-
4.2, 4.3, 4.4, Table 1(Ca)	-	7000	-
4.2, 4.3, 4.4, Table 1(As)	-	7000	-
4.2, 4.3, 4.4, Table 1(Na)	-	7000	-
4.2, 4.3, 4.4, Table 1(Cl)	-	7000	-
4.2, 4.3, 4.4, Table 1(Sulphate (as SO4 ))	-	7000	-
4.2, 4.3, 4.4, Table 1(Phosphate (PO4 ))	-	7000	-
4.5(Additional Requirement for Technical Grade Boric Acid)	-	7000	-
4.3 - Table 1 - Sl No - xi(Phosphate (PO4) - Annex A 12 )	-	7000	-
4.3 - Table 1 - Sl No - x(Sulphate (as SO4) - Annex A 11)	-	7000	-
4.3 - Table 1 - Sl No - ix(Chloride (Cl) - Annex A 10)	-	7000	-
4.3 - Table 1 - Sl No - viii(Sodium (as Na) - Annex A 9)	-	7000	-
4.3 - Table 1 - Sl No - vii(Arsenic (as As) - Annex A 8)	-	7000	-
4.3 - Table 1 - Sl No - vi(Calcium (as Ca) - Annex A 7)	-	7000	-
4.3 - Table 1 - Sl No - v( Iron (as Fe) - Annex A 6)	-	7000	-
4.3 - Table 1 - Sl No - iv(Heavy metals (as Pb) - Annex A 5)	-	7000	-
4.3 - Table 1 - Sl No - iii(Water insoluble matter - Annex A 4)	-	7000	-
4.3 - Table 1 - Sl No - ii( Moisture - Annex A 3)	-	7000	-
4.3 - Table 1 - Sl No - i( Boric acid (as H3BO3) - Annex A 2)	-	7000	-
4.2 ( Description)	-	7000	-
4.6(Boric Acid for Use in Explosives)	-	7000	-

-
-

IS 17037 (2018)

Anti riot shoes - Specification

ALL

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	50000	-
4.16.2(Breaking load & lag retention)	-	50000	-
4.16.1(Length of laces )	-	50000	-
4.15(D-ring and Hooks )	-	50000	-
4.14.10(Resistance to fuel oil)	-	50000	-
4.14.9(Resistance to hot contact)	-	50000	-
4.14.8(Flex resistance)	-	50000	-
4.14.7(Abrasion resistance)	-	50000	-
4.14.6(Tear Strength)	-	50000	-
4.14.5(Ageing test)	-	50000	-
4.14.4(Hardness (IRHD))	-	50000	-
4.14.3(Density )	-	50000	-
4.14.2(Thickness )	-	50000	-
4.14.1(Meterial)	-	50000	-
4.13(Breaking Strength of thread)	-	50000	-
4.12.2(Tear Strength)	-	50000	-
4.12.1(Thickness )	-	50000	-
4.11.2(Tear Strength)	-	50000	-
4.11.1(Thickness)	-	50000	-
4.10(Counter stiffener thickness)	-	50000	-
4.9.3(Water absorption & desorption )	-	50000	-
4.9.2(Abrasion resistance )	-	50000	-
4.9.1(Meterial)	-	50000	-
4.8.3(Water absorption & desorption )	-	50000	-
4.8.2(Abrasion resistance )	-	50000	-
4.8.1(Meterial)	-	50000	-
4.7.5(Water vapour permeability & coefficent )	-	50000	-
4.7.4(Abrasion resistance )	-	50000	-
4.7.3(Tear Strength)	-	50000	-
4.7.1(Meterial)	-	50000	-
4.6.4(Water penetration and water absorption)	-	50000	-
4.6.3(Water vapour permeability & coefficent )	-	50000	-
4.6.2(Tear Strength)	-	50000	-
4.6.1(Thickness )	-	50000	-
4.5.11(Water resistance machine method)	-	50000	-
4.5.11(Water Resistance Tray method )	-	0	-
4.5.11(Thickness Toe puff & counter stiffener)	-	50000	-
4.5.10(Energy absorption of seat region )	-	50000	-
4.5.9(Cold insulation of sole complex)	-	50000	-
4.5.8(Heat insulation of sole complex)	-	50000	-
4.5.7.1(Antistatic test)	-	50000	-
4.5.6.4(Compression resistance)	-	50000	-
4.5.6.3(Impact resistance )	-	50000	-
4.5.6.2(Internal Toe cap length)	-	50000	-
4.5.6.1(General)	-	50000	-
4.5.5.4(Ageing test)	-	50000	-
4.5.5.2(Flex resistance )	-	50000	-
4.5.5.1(Dimension)	-	50000	-
4.5.4(Slip Resitance)	-	50000	-
4.5.3.2(Interayer bond strength)	-	50000	-
4.5.3.1(Upper/outsole bond strength)	-	50000	-
4.5.2(Ergonomic Feature)	-	50000	-
4.5.1(Contruction)	-	50000	-
4.4(Height of upper )	-	50000	-
4.3.2(Weight)	-	50000	-
4.3.1(Size)	-	50000	-
4.2(Design )	-	50000	-
4.1(General)	-	50000	-
4.5.3(Bond strength)	-	50000	-
4.9(Insocks)	-	50000	-
5(Chemical Requirements)	-	0	-
6.1(Scale of Sampling)	-	50000	-
6.2(Methods of Selecting Footwear)	-	50000	-
6.3.1(Visual and Tactile Examination)	-	50000	-
6.3.2(Dimensional Characteristics)	-	50000	-
6.3.3.1(Tests for physical requirements)	-	50000	-
6.3.3.2(Tests for chemical requirements)	-	50000	-
7(Marking)	-	50000	-
4.4, Table 2(Shoe size)	-	50000	-
4.4, Table 2(Height)	-	50000	-
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	50000	-
Cl-4.7.2(Counter and Tongue Lining)	-	50000	-
Cl-5 (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	50000	-
Cl-5 (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl-5 (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl-5 (IS - 17011,Table - 1(iv)(Chromium (VI))	-	50000	-
Cl-5 (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	50000	-
Cl-5 (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
Cl-5 (IS - 17011,Table - 1(vii)(Formaldehyde)	-	50000	-
Cl-5 (IS - 17011,Table - 1(viii)(Organotin compounds)	-	50000	-
Cl-5 (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	50000	-
Cl-5 (IS - 17011,Table - 1(x)(pH)	-	50000	-
Cl-5 (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	50000	-
Cl-5 (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	50000	-
4.5.5.3(Nail penetraion Insert )	-	50000	-

-
-

IS 3735 (1996)

Canvas Shoes, Rubber Sole

ALL

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	14800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	14800	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	14800	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	14800	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	14800	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	14800	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	14800	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	14800	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	14800	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	14800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	14800	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	14800	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	14800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	14800	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	14800	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	14800	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	14800	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	14800	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	14800	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	14800	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	14800	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	14800	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	14800	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	14800	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	14800	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	14800	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	14800	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	14800	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	14800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	14800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	14800	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	14800	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	14800	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	14800	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	14800	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	14800	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	14800	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	14800	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	14800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	14800	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	14800	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	14800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	14800	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	14800	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	14800	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	14800	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	14800	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	14800	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	14800	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	14800	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	14800	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	14800	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	14800	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	14800	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	14800	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	14800	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	14800	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	14800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	14800	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	14800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	14800	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	14800	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	14800	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	14800	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	14800	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	14800	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	14800	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	14800	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	14800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	14800	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	14800	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	14800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	14800	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	14800	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	14800	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	14800	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	14800	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	14800	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	14800	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	14800	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	14800	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	14800	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	14800	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	14800	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	14800	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	14800	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	14800	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	14800	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	14800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	14800	-
4.8(Adhesion )	-	14800	-
4.7(Consolidation test )	-	14800	-
4.6(Mass )	-	14800	-
4.5(Finish )	-	14800	-
4.4(Contruction )	-	14800	-
4.3(Leg Height )	-	14800	-
4.2(Design )	-	14800	-
4.1.6.2(Thickness of components )	-	14800	-
4.1.6.2(Ageing)	-	14800	-
4.1.6.2(Elongation at break after ageing )	-	14800	-
4.1.6.2(Tensile after ageing )	-	14800	-
4.1.6(Compression set )	-	14800	-
4.1.6(Elongation at break )	-	14800	-
4.1.6(Tensile strength)	-	14800	-
4.1.6(Hardness (after accelerated ))	-	14800	-
4.1.6(Flexing resistance test)	-	14800	-
4.1.6(Hardness )	-	14800	-
4.1.6(Relative density)	-	14800	-
4.1.5(Sulpher dyes content )	-	14800	-
4.1.5(Breaking Load )	-	14800	-
4.1.5(Length )	-	14800	-
4.1.4(Thickness)	-	14800	-
4.1.4(Size )	-	14800	-
4.1.3(Color fastness to perspiration)	-	14800	-
4.1.3(Colorfastness to washing)	-	14800	-
4.1.3(Colorfastness to light )	-	14800	-
4.1.3(Single thread breaking load)	-	14800	-
4.1.3(Construction )	-	14800	-
4.1.2(Colorfastness to light )	-	14800	-
4.1.2(Colorfastness to washing)	-	14800	-
4.1.2(Breaking Strength )	-	14800	-
4.1.2(Width )	-	14800	-
4.1.1.2(Colorfastness to washing)	-	14800	-
4.1.1.1(Colorfastness to light )	-	14800	-
4.1.1 (Drill) (End & Picks/dm)	-	14800	-
4.1.1 (Drill) (Colorfastness to light )	-	14800	-
4.1.1 (canvas )(End & Picks/dm)	-	14800	-
4.1.1 (canvas )(Breaking Load )	-	14800	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	14800	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	14800	-
Cl.4.1 (Table B-3 Sl I)(Allergenic and Carcinogenic Disperse Dyes)	-	14800	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	14800	-

-
-

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

ALL

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	38500	-
Cl-4.3.1(Size)	-	38500	-
Cl-4.3.2(Weight)	-	38500	-
Cl-4.4(Height of Upper)	-	38500	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	38500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	38500	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	38500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	38500	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	38500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	38500	-
Cl-4.6.1(Material)	-	38500	-
Cl-4.6.2(Tear Strength)	-	38500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	38500	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	38500	-
Cl-4.7.1(Material)	-	38500	-
Cl-4.7.2(Tear Strength)	-	38500	-
Cl-4.7.3(Abrasion Resistance)	-	38500	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	38500	-
Cl. 4.8.1(Material)	-	38500	-
Cl-4.8.2(Abrasion Resistance)	-	38500	-
Cl-4.8.3(Water Absorption and Desorption)	-	38500	-
Cl-4.9.3(Abrasion Resistance)	-	38500	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	38500	-
Cl-4.11.1(Material)	-	38500	-
Cl-4.11.2(Tear Strength)	-	38500	-
Cl-4.12(Closing Thread)	-	38500	-
Cl-4.13.2(Thickness)	-	38500	-
Cl-4.13.3(Moulded Density)	-	38500	-
Cl-4.13.4(Hardness)	-	38500	-
Cl-4.13.5(Ageing Test)	-	38500	-
Cl-4.13.6(Tear Strength)	-	38500	-
Cl-4.13.7(Abrasion Resistance)	-	38500	-
Cl-4.13.8(Flexing Resistance)	-	38500	-
Cl-4.14(Eyelet)	-	38500	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	38500	-
Cl-5(Chemical Requirements)	-	38500	-
Cl-7(Marking)	-	38500	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	38500	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	38500	-
Cl.4.5.3.2(Interlayer bond strength)	-	38500	-
Cl-4.9.1(Material)	-	38500	-
Cl-4.9.2(Water Absorption and Desorption)	-	38500	-
Cl-4.13.1(Material)	-	38500	-
Cl-4.15.1(Material)	-	38500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	38500	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	38500	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	38500	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	38500	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	38500	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	38500	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	38500	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	38500	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	38500	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	38500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	38500	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	38500	-
4.9 Insocks(Insock thickness)	-	38500	-

-
-

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

ALL

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	43500	-
5.3(Height)	-	43500	-
5.4.4(Slip resistance)	-	43500	-
5.4.5(Leak proofness)	-	43500	-
5.4.6.1(Toe caps General)	-	43500	-
5.4.6.2(Internal length of toecaps)	-	43500	-
5.4.6.3(Corrosion resistance)	-	43500	-
5.4.6.4(Impact resistance)	-	43500	-
5.4.6.5(Compression resistance)	-	43500	-
5.4.7(Colour)	-	43500	-
5.5.1(Upper material)	-	43500	-
5.5.1(Upper Thickness)	-	43500	-
5.5.2(Upper tensile strength)	-	43500	-
5.5.3(Upper flexing)	-	43500	-
5.5.4(Upper Hardness)	-	43500	-
5.6.1(Lining material)	-	43500	-
5.6.2(Lining Tear strength)	-	43500	-
5.6.3(Lining abrasion)	-	43500	-
5.6.4(Lining adhesion with upper)	-	43500	-
5.7.1(Insole material)	-	43500	-
5.7.1(Insole thickness)	-	43500	-
5.7.2(Insole abrasion)	-	43500	-
5.7.3(Water absorption and desorption)	-	43500	-
5.8.2(Eyelets material)	-	43500	-
5.8.2(Lace material)	-	43500	-
5.8.2(Lace length)	-	43500	-
5.8.2(Lace breaking load)	-	43500	-
5.9.1(Insock material)	-	43500	-
5.9.2(Inscok abrasion resistance)	-	43500	-
5.9.3(Insock water absorption and desorption)	-	43500	-
5.8.2(Closing thread breaking load)	-	43500	-
5.11.1(Outsole material)	-	43500	-
5.11.1(Outsole thickness)	-	43500	-
5.11.2(Outsole density)	-	43500	-
5.11.3(Outsole Interlayer bond)	-	43500	-
5.11.4(Outsole tear)	-	43500	-
5.11.5(Outsole Abrasion)	-	43500	-
5.11.6(Outsole hardness)	-	43500	-
5.11.7(Outsole flexing)	-	43500	-
5.4.2(Ergonomic feature)	-	43500	-
5.4.3(Sole bond)	-	43500	-
5.4.8.1(Conductive Footwear)	-	43500	-
5.4.8.2(Antistatic Footwear)	-	43500	-
5.4.8.3.2(Penetration resistance)	-	43500	-
5.4.8.4(Cut resistance)	-	43500	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	43500	-
5.11.8(Outsole cold flex resistance)	-	43500	-
6.1(Volatility)	-	43500	-
5.4.8.5(Outsole resistance to acid and alkali)	-	43500	-
6.2(Lead content)	-	43500	-
Table 1 as per IS 17011 2018(pH)	-	43500	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	43500	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	43500	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	43500	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	43500	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	43500	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	43500	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	43500	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	43500	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	43500	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	43500	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	43500	-
5.10(Closing Thread (If used))	-	43500	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	43500	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	43500	-

-
-

IS 15573 (2018)

Polyaluminium chloride (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Description -)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(i)(Aluminium as Al2O3,)	-	1500	-
5.1.1, 5.1.2, 5.2, Table-1(ii)(Basicity)	-	1000	-
5.1.1, 5.1.2, 5.2, Table-1(iii)(Chloride (as Cl))	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(iv)(Sulphates(as SO4))	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(v)(Specific gravity)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(x)(Insoluble)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(xi)(Ph of 5% of solution)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(vii)(Bulk density)	-	500	-
5.1.1,5.1.2,5.2, Table-1, Toxic substances(Mercury(as Hg))	-	1200	-
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances(Arsenic(as As))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Cadmium(as Cd))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Lead(as Pb))	-	1200	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances(Iron(as Fe))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Manganese(as Mn))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Chromium (as Cr))	-	1200	-
5.1.1, 5.12, 5.2, Table-1, Toxic substances(Selenium (as Se))	-	1200	-
Clause no. 5.1(Description)	-	500	-
Clause no. 5.1(Description)	-	500	-
Clause no. 5.1(Description)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (i)(Aluminium as Al2O3)	-	1000	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (ii)(Relative basicity)	-	1000	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (iii)(Chloride as Cl)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (iv)(Sulphate as SO4)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (v)(Specific gravity at 25°C)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (v)(Specific gravity at 25°C)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (vii)(Bulk Density)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (a)(Toxic Substances: Mercury (as Hg))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (a)(Toxic Substances: Mercury (as Hg))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) ©(Toxic Substances: Cadmium (as Cd))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) ©(Toxic Substances: Cadmium (as Cd))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (h)(Toxic Substances: Selenium (as Se))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (h)(Toxic Substances: Selenium (as Se))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (x)(Insolubles)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (xi)(pH of 5% of solution, w/v)	-	500	-

-
-

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	250	-
6(Sizes and Fittines)	-	250	-
7(Consturction)	-	250	-
8.1(Lining Material)	-	250	-
8.2, Table-1 (i)(Width, mm, Min)	-	500	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	1000	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	500	-
8.4(Use of Rubber material)	-	250	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	1000	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	1500	-
8.5(Upper material)	-	250	-
8.5.1(Tensile Strength of upper)	-	1000	-
8.5.2(Thickness)	-	500	-
8.5.3(Flexing Resistance)	-	1500	-
8.5.4(Abrasion Resistance)	-	1000	-
8.6.1(Thickness of Outsole)	-	250	-
8.6.2(Tear Strength)	-	1000	-
8.6.3(Abrasion Resistance of Outsole)	-	1200	-
8.6.4(Flexing Resistance)	-	500	-
8.6.5(Inter layer Bond Strength of outsole)	-	1000	-
Cl-8.7(Insocks material)	-	250	-
8.7.1(Thickness of Insocks)	-	500	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	1000	-
Cl-8.8.1(Outsole/Heel)	-	1000	-
Cl-8.9(Leak Proof Test)	-	1200	-
8.10(Height of Upper)	-	500	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	1000	-
Cl-8.12(Upper Outsole Bond Strength)	-	1000	-
Cl-8.13(Internal Length of Toe Cap)	-	500	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	1000	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	1000	-
8.16(Banned Chemicals)	-	15000	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	1000	-
8.17(Steel Floor with Glycerine)	-	1000	-
8.18(Corrosion Resistant Test for Toe Caps)	-	1000	-
9.1(Penetration Resistance)	-	1000	-
9.2(Antistatic Footwear)	-	1500	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	1000	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	1000	-
9.6(Resistance to Fuel Oil)	-	1000	-
11.2(Marking)	-	250	-

-
Included w.e.f. 01.04.2026 Exclusion: "9.3 (Flame Resistance Property) 9.4 (Electrical Resistance)"

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

ALL

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	1500	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	1000	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	1000	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	1000	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	500	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	1000	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	1000	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	500	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	1000	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1000	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	1000	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	1000	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	500	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	1000	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	500	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	1000	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1000	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	1000	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	1000	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	1000	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1000	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	1000	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	1000	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	1000	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1000	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1000	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	500	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	1000	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	500	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	500	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	500	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	500	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	500	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	500	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	500	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	500	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	500	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	500	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	500	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	1000	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	1000	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	1000	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	1000	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	1000	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	1000	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	1000	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	1000	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1000	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	1000	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	1000	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	500	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	1000	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	500	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	1000	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1000	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	1000	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	1000	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	1000	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1000	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	1000	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	1000	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	1000	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1000	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1000	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	500	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1000	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	1000	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	500	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	500	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	500	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	500	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	500	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	500	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	500	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	500	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	500	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	500	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	500	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	1000	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	1000	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	1000	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	1000	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	1000	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	1000	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	1000	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	1000	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1000	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	1000	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	1000	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	500	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	1000	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	500	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	1000	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1000	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	1000	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	1000	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	1000	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1000	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	1000	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	1000	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	500	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1000	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	1000	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	500	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	1000	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	500	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	500	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	500	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	500	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	500	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	500	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	500	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	500	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	500	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	500	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	500	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	-
4.1.3.2(Fastness to mechanical washing (mild))	-	1000	-
4.1.3(Cotton tape NEWAR)	-	500	-
Table 2 (ii)(Breaking load on 50 cm test length. N, Min)	-	1000	-
4.1.6.2(Laces- Fastness to daylight)	-	1000	-
4.1.6.3(Laces- Fastness to mechanical washing (mild))	-	1000	-

-
Included w.e.f. 07.04.2026

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

ALL

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,Table 1(Class I, IS 15298)	-	1000	-
4,Table 1(Class II, IS 15298)	-	1000	-
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	1000	-
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	600	-
5.2.3, Table 10 ,Design A(Seat Region)	-	600	-
5.3.1.1(Construction)	-	500	-
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	600	-
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	700	-
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	600	-
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	700	-
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	700	-
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	600	-
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	500	-
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	800	-
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	700	-
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	700	-
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	800	-
5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-	800	-
5.3.6(Innocuousness)	-	700	-
5.4.1,Table 10(General)	-	500	-
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	500	-
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	700	-
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	700	-
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	600	-
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	600	-
5.4.7(Ph Value ; ISO 20344,6.9)	-	500	-
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	600	-
5.4.9(Chromium VI content; ISO 17075)	-	700	-
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	700	-
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	600	-
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	600	-
5.5.4(Ph Value ; ISO 20344,6.9)	-	500	-
5.5.5(Chromium VI content; ISO 17075)	-	700	-
5.6(Tongue - IS 15298 Part 2 )	-	700	-
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	700	-
5.6.2(Ph Value ; ISO 20344,6.9)	-	500	-
5.6.3(Chromium VI content; ISO 17075)	-	700	-
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	500	-
5.7.2(Ph Value ; ISO 20344,6.9)	-	500	-
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	700	-
5.7.4.1(Insole ; ISO 20344,7.3 )	-	600	-
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	600	-
5.7.5(Chromium VI content; ISO 17075)	-	1000	-
5.8.1(Design, IS 15298 Part 2 )	-	500	-
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	500	-
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	600	-
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	600	-
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	700	-
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	700	-
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	700	-
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	700	-
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	800	-
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	700	-
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	700	-
6.2.1.2(Consruction)	-	600	-
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	500	-
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	700	-
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	700	-
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	700	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	800	-
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	800	-
6.2.2.3(Electrically insulating footwear; EN 50321)	-	600	-
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	600	-
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	600	-
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	600	-
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	700	-
6.2.6.1(Construction)	-	600	-
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	700	-
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	0	-
6.2.8.1(Design)	-	500	-
6.2.8.2(Construction)	-	600	-
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	600	-
6.2.8.4(Penetration Resistance)	-	600	-
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	600	-
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	600	-
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	600	-
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	800	-
Cl.7, table 2,table 18,table 20, table21, EN 13832-1,EN 13832-3: 2006,6.2.2.3(Marking)	-	800	-
8(Information to be supplied)	-	700	-
Cl.8.1 IS 15298 Part 2:2016 + A1:2019 + A2:2019, ISO 20345 :2011(General)	-	1000	-
8.2(Electrical Properties)	-	800	-
8.2.2(Antistatic footwear)	-	700	-
8.3(Insocks)	-	800	-
Cl.5.7.3(Water absorption and desorption)	-	600	-
Cl.5.7.2(PH value)	-	500	-
5.5.1(Tear strength)	-	600	-
5.5.2(Abrasion Resistance)	-	600	-
5.5.3(W.V.P & W.V.C)	-	600	-
5.7.1(Insole thickness)	-	500	-
5.7.4.2(Insock abrasion)	-	600	-
5.8.1.2(Cleated area)	-	600	-
5.8.4(Flexing resistance)	-	800	-
5.8.1.1(Thickness)	-	500	-
5.8.1.3(Cleat height)	-	500	-
Cl-5.3.6 (IS 17011, Table-1 (i)(Allergenic and carcinogenic disperse dyes)	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl-5.3.6 (IS 17011, Table-1 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl-5.3.6 (IS 17011, Table-1 (iv)(Chromium (VI))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (vii)(Formaldehyde)	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (vii)(Formaldehyde)	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (viii)(Organotin compounds)	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-5.3.6 (IS 17011, Table-1 (x)(pH)	-	500	-
Cl-5.3.6 (IS 17011, Table-1 (xi)(Phthalates (each individual phthalate))	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (xii)(Nickel, on skin contact)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Cl.1.4.1 of IS 17011(DMFU)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	1000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	1000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	1000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	1000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	1000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	1000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	1000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	1000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	1000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	1000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	1000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	1000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	1000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	1000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	1000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	1000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	1000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	1000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	1000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	1000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	1000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	1000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	1000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	1000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	1000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	1000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	1000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	1000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes :Disperse yellow 23)	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-

-
-

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

ALL

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.0(Marking)	-	16500	-
10.1(Elongation)	-	16500	-
10.1(Tensile Strength)	-	16500	-
8.0(Transmitting Capacities)	-	16500	-
7.2.2(Matched Belts - Code)	-	16500	-
7.2.1(Matched Belts - Difference)	-	16500	-
7.1(Belt Pitch Length)	-	16500	-
6.0(Designation)	-	16500	-
5 Table 2B(Cross sectional dimension)	-	16500	-
5 Table 2B(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
4.1(Material and Workmanship)	-	16500	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	16500	-
4.1(Material and Workmanship)	-	16500	-
7.2(Test Matched Belts)	-	16500	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	16500	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	16500	-
Clause 5 Table 1(Nominal Height (T))	-	16500	-
Clause 5 Table 1(Nominal Included Angle (A))	-	16500	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	16500	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	16500	-

-
Included w.e.f-18.12.2025

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

ALL

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	400	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	300	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	400	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	500	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	300	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	500	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	300	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	500	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	500	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	300	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	500	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	500	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	500	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	300	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	500	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5, 5.1(Requirement)	-	500	-
6.1(Marking)	-	300	-
6, 6.1(Packing)	-	300	-
5, 5.1(Requirement)	-	300	-
6.1(Marking)	-	300	-
6.2(Packing)	-	300	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	300	-

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

32/41 & 32/40 , South Side of GT Road, UPSIDC Industrial Area,Ghaziabad (Delhi-NCR), Ghaziabad, Ghaziabad, Uttar Pradesh, 201009

9810243870 ekotestinglabs@gmail.com

Scope List