BIS - LIMS (Laboratory Information Management System)

Classic Testing & Research Centre (B17), Noida

B-17, Sector-65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

7982333919 cbcd@classiclabindia.com

Scope List

Reset

54 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	1000	-
22.32(CONSTRUCTION)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges)

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
10(POWER INPUT AND CURRENT)	-	500	-
11(HEATING)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
14(TRANSIENT OVERVOLTAGES)	-	500	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	500	-
22.32(Oxygen bomb for rubber material)	-	500	-
22.47(Water pressure inlet)	-	500	-
22.106(Interlocks)	-	500	-
22.3(Flexing test)	-	500	-
24(Components)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
4(General requirements)	-	500	-
5(General Conditions of tests)	-	500	-
6(Classification- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-2-15)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.5(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
Marking- IS 302-1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-2-15)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.5(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.9(Marking- IS 302-1)	-	500	-
7.1O(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-2-15)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.12.1(Marking- IS 302-1)	-	500	-
7.12.3(Marking- IS 302-1)	-	500	-
7.12.5(Marking- IS 302-1)	-	500	-
7.12.6(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking- IS 302-2-15)	-	500	-
8(Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	500	-
16(Leakage current as per Cl 16, IS 302-1)	-	500	-
16(electric strength as per Cl 16, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	500	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	500	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.1O(Internal Wiring, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	500	-
27.3(Provision for Earthing, IS 302-1)	-	500	-
27.4(Provision for Earthing, IS 302-1)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	500	-
31(Resistance of Rusting, IS 302-1)	-	500	-
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
10(POWER INPUT AND CURRENT)	-	500	-
11(HEATING)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
14(TRANSIENT OVERVOLTAGES)	-	500	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	500	-
22.32(Oxygen bomb for rubber material)	-	500	-
22.47(Water pressure inlet)	-	500	-
22.106(Interlocks)	-	500	-
22.3(Flexing test)	-	500	-
24(Components)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
4(General requirements)	-	500	-
5(General Conditions of tests)	-	500	-
6(Classification- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-2-15)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.5(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
Marking- IS 302-1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-2-15)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.5(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.9(Marking- IS 302-1)	-	500	-
7.1O(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-2-15)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.12.1(Marking- IS 302-1)	-	500	-
7.12.3(Marking- IS 302-1)	-	500	-
7.12.5(Marking- IS 302-1)	-	500	-
7.12.6(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking- IS 302-2-15)	-	500	-
8(Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	500	-
16(Leakage current as per Cl 16, IS 302-1)	-	500	-
16(electric strength as per Cl 16, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	500	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	500	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.1O(Internal Wiring, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-

15 Oct, 2027

-
w.e.f 17.12.2024 Exclusion: 19.11.4.2 (Radiated fields), 19.11.4.5 (Immunity to conducted discharges).

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	10001000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	10001000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-

15 Oct, 2027

-
w.e.f 17.12.2024 Exclusion: 19.11.4.2 (Radiated fields), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.5 (Immunity to conducted discharges).

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	1000	-
21.5(Classification of Luminaires')	-	1000	-
21.6(Marking)	-	1000	-
21.7(Construction)	-	1000	-
21.8(Creepage Distance and Clearances)	-	1000	-
21.9(Provision for earthing)	-	1000	-
21.10(Terminals)	-	1000	-
21.11(External & Internal Wiring)	-	1000	-
21.12(Protection against electric shock)	-	1000	-
21.13(Endurance Tests and Thermal Tests)	-	1000	-
21.14(Resistance to Dust & Moisture)	-	1000	-
21.15(Insulation Resistance and Electric Strength)	-	1000	-
21.16(Resistance to Heat , fire and tracking)	-	1000	-
21.7.1(General)	-	1000	-
21.7.3(Terminals and supply connections)	-	1000	-
21.7.4(Control units)	-	1000	-
21.7.5(Mechanical strength)	-	1000	-

15 Oct, 2027

-
Included w.e.f.13.12.2024

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
4.26.2(Short Circuit Protection)	-	2000	-
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
4.26.2(Short Circuit Protection)	-	2000	-

15 Oct, 2027

-
Included w.e.f.13.12.2024 Exclusion 17.0 (Photometric Test) (Cl.4.24) (Annex-P) (UV Radiations for metal halide lamps)

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	1000	-
Cl.31(Verification)	-	1000	-
Cl.30(Verification)	-	1000	-
CL.29(Verification)	-	1000	-
Cl.28(Verification)	-	1000	-
Cl.27(Verification)	-	1000	-
Cl.26(Verification)	-	1000	-
Cl.25(Verification)	-	1000	-
Cl.24(Verification)	-	1000	-
Cl.23(Verification)	-	1000	-
Cl.22(Verification)	-	1000	-
Cl.21(Verification)	-	1000	-
Cl.20(Verification)	-	1000	-
Cl.19(Verification)	-	1000	-
Cl. 16(Verification)	-	1000	-
Cl.15.1(Moisture Resistance)	-	1000	-
Cl.14(Verification)	-	1000	-
Cl.13(Verification)	-	1000	-
Cl.11(Verification)	-	1000	-
Cl.10(Verification)	-	1000	-
Cl.8(Verification)	-	1000	-
Cl. 7(Verification)	-	1000	-
Cl. 6(Classification- IS 302-1)	-	1000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	1000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	1000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	1000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	1000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	1000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	1000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	1000	-
Cl. 22 IS 302-2-9(Construction )	-	1000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	1000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-9(Endurance)	-	1000	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	1000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	1000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	1000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	1000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	1000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	1000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion CL 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	2000	-
5.2(Message Readability)	-	1000	-
6(Marking)	-	1000	-
"Cl.6.1 "(Marking)	-	1000	-
"Cl.6.2 "(BIS Certification Marking)	-	1000	-
4(Requirements)	-	1000	-
5(Tests)	-	1000	-
6(Marking)	-	1000	-

15 Oct, 2027

-
Included w.e.f.29.11.2024

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	1000	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	1000	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	1000	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	1000	-
17.0(Overload protection of transformers test)	-	1000	-
18.0(Endurance test)	-	500	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
22.0(Construction verification related tests)	-	1000	-
23.0(Internal wiring)	-	1000	-
24.0(Components)	-	1000	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	1000	-
27.0(Provision for Earthing)	-	1500	-
28.0(Screws and connections)	-	1000	-
29.0(Clearances and Creepage distances and solid insulation)	-	1000	-
30.0(Resistance to heat and fire)	-	1000	-
31.0(Resistance to rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar hazards)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	500	-

15 Oct, 2027

-
Included w.e.f.29.11.2024 Exclusion CL 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	1000	-
7(Heating under normal operating conditions)	-	1000	-
8(Constructional requirements with regard to the protection against electric shock)	-	1000	-
9(Electric shock hazard under normal operating conditions)	-	1500	-
10(Insulation requirements)	-	1000	-
11(Fault conditions)	-	500	-
12(Mechanical strength)	-	500	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	-
15(TERMINALS)	-	500	-
16(External flexible cords)	-	500	-
17(Electrical connections and mechanical fixings)	-	500	-
19(Stability and mechanical hazards)	-	500	-
20(Resistance to fire)	-	500	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	500	-
8.16(Wound Component)	-	1000	-
15(Internal wires and power cords)	-	500	-
16.3b(Cord Bending Test)	-	500	-
20.2.4(Printed Boards)	-	1000	-
3(General requirements)	-	1000	-
4(General test conditions)	-	1000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	500	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	500	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	500	-
Cl.5.1 of Cl.5(General requirements)	-	500	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	500	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	500	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	1000	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	1000	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	500	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	1000	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	500	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	500	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	500	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	500	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	500	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	500	-
Cl.5.3 of Cl.5(Terminals)	-	500	-
Cl.5.3a) of Cl.5(Earth terminal)	-	500	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	500	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	500	-
Cl.5.4 of Cl.5(Caution marking)	-	500	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	500	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	500	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	500	-
Cl.5.5 of Cl.5(Instructions)	-	500	-
Cl.5.5 of Cl.5(Instructions)	-	500	-
Cl.5.5 of Cl.5(Instructions)	-	500	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	500	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	500	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	500	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	500	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	500	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	500	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	500	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	500	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	500	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	500	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	500	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	500	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	500	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	1000	-
Cl.7.1 of Cl.7(General)	-	1000	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	1000	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	500	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	500	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	500	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	500	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	500	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	500	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	500	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	1000	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	500	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	500	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	500	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	500	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	500	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	1000	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	500	-
Cl.8.6 of Cl.8(Class II apparatus)	-	500	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	500	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	500	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	500	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	500	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	500	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	500	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	500	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	500	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	500	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	500	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	500	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	500	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	500	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	500	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	500	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	500	-
Cl.8.11 of Cl.8(Detaching of wires)	-	500	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	500	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	500	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	500	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	500	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	500	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	500	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	500	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	500	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	500	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	500	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	500	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	500	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	500	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	500	-
Cl.9.1 of Cl.9(Testing on the outside)	-	500	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	500	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	500	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	500	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	500	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	500	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	500	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	500	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	500	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	500	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	500	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	500	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	500	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	500	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	500	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	500	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	500	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	500	-
Cl.10.2 of Cl.10(Surge Test)	-	500	-
Cl.10.2 a) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	500	-
Cl.10.3 of Cl.10(Humidity treatment)	-	500	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	500	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	500	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	500	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	500	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	500	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	500	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.2 of Cl.11(Heating)	-	1000	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	1000	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	500	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	500	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	500	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	500	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	500	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	500	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	500	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	500	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	500	-
Cl.11.2.6 of Cl.11.2(Windings )	-	500	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	500	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	500	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	500	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	500	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	500	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	500	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	500	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	500	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	500	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	500	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	500	-
Cl.12.4 of Cl.12(Drawers )	-	500	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	500	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	500	-
Cl.12.5 b) of Cl.12(Impact test,)	-	500	-
Cl.12.5 c) of Cl.12(Torque test)	-	500	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	500	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	500	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	500	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	500	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	500	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	500	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	500	-
Cl.12.7.3 of Cl.12.7(Tests)	-	500	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	500	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	500	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	500	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	500	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	500	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	500	-
Cl.13.1 of Cl.13(General)	-	500	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	500	-
Cl.13.3 of Cl.13(Clearances)	-	500	-
Cl.13.3.1 of Cl.13.3(General)	-	500	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	500	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	500	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	500	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	500	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	500	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	500	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	500	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	500	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	500	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	500	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	500	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	500	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	500	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	500	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	500	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	500	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	500	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	500	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	500	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	500	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	500	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	500	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	500	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	500	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	500	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	500	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	500	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	500	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	500	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	500	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	500	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	500	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	500	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	500	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	500	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	500	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	500	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	500	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	500	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	500	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	500	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	500	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	500	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	500	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	500	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	500	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	500	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	500	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	500	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	500	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	500	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	500	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	500	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	500	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	500	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	500	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	500	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	500	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	500	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	500	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	500	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	500	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	500	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	500	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	500	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	500	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	500	-
Cl.19.1 of Cl.19(Stability requirements)	-	500	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	500	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	500	-
Cl.19.3 of Cl.19(Vertical force test )	-	500	-
Cl.19.4 of Cl.19(Horizontal force test)	-	500	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	500	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	500	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	500	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	500	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	500	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	500	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	500	-
Cl.20.1 of Cl.20(Requirements)	-	500	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	500	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	500	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	500	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	500	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	500	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	500	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	500	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	500	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	500	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	500	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	500	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	500	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	500	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	500	-
5(Marking and instructions)	-	500	-
7(Heating under normal operating conditions)	-	1000	-
8(Constructional requirements with regard to the protection against electric shock)	-	1000	-
9(Electric shock hazard under normal operating conditions)	-	1000	-
10(Insulation requirements)	-	1000	-
11(Fault conditions)	-	1000	-
12(Mechanical strength)	-	1000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	-
15(TERMINALS)	-	1000	-
16(External flexible cords)	-	1000	-
17(Electrical connections and mechanical fixings)	-	1000	-
19(Stability and mechanical hazards)	-	1000	-
20(Resistance to fire)	-	1000	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	1000	-
8.16(Wound Component)	-	500	-
15(Internal wires and power cords)	-	500	-
16.3b(Cord Bending Test)	-	1000	-
20.2.4(Printed Boards)	-	1000	-
3(General requirements)	-	500	-
4(General test conditions)	-	500	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	1000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	1000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	1000	-
Cl.5.1 of Cl.5(General requirements)	-	500	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	500	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	500	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	1000	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	1000	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	1000	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	500	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	1000	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	1000	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	1000	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	1000	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	1000	-
Cl.5.3 of Cl.5(Terminals)	-	1000	-
Cl.5.3a) of Cl.5(Earth terminal)	-	1000	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	1000	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	1000	-
Cl.5.4 of Cl.5(Caution marking)	-	1000	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	1000	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	1000	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	1000	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	1000	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	1000	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	500	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	1000	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	1000	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	1000	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	1000	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	1000	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	1000	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	1000	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	1000	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	1000	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	1000	-
Cl.7.1 of Cl.7(General)	-	1000	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	1000	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	1000	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	1000	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	1000	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	1000	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	1000	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	1000	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	1000	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	1000	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	1000	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	1000	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	1000	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	1000	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	1000	-
Cl.8.6 of Cl.8(Class II apparatus)	-	1000	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	1000	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	1000	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	1000	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	1000	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	1000	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	1000	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	1000	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	1000	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	1000	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	1000	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	1000	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	1000	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	1000	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	1000	-
Cl.8.11 of Cl.8(Detaching of wires)	-	1000	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	1000	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	1000	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	1000	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	1000	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	1000	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	1000	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	1000	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	1000	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	1000	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	1000	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	1000	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	1000	-
Cl.9.1 of Cl.9(Testing on the outside)	-	1000	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	1000	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	1000	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	1000	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	1000	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	1000	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	1000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	1000	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	1000	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	1000	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	1000	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	1000	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	1000	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	1000	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	1000	-
Cl.10.2 of Cl.10(Surge Test)	-	1000	-
Cl.10.2 a) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	1000	-
Cl.10.3 of Cl.10(Humidity treatment)	-	1000	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	1000	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	1000	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	1000	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	1000	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	1000	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.2 of Cl.11(Heating)	-	1000	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	1000	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	1000	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	1000	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	1000	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	1000	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	1000	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	1000	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	1000	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	1000	-
Cl.11.2.6 of Cl.11.2(Windings )	-	1000	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	1000	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	1000	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	1000	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	1000	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	1000	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	1000	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	1000	-
Cl.12.4 of Cl.12(Drawers )	-	1000	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	1000	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	1000	-
Cl.12.5 b) of Cl.12(Impact test,)	-	1000	-
Cl.12.5 c) of Cl.12(Torque test)	-	1000	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	1000	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	1000	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	1000	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	1000	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	1000	-
Cl.12.7.3 of Cl.12.7(Tests)	-	1000	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	1000	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	1000	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	1000	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	1000	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	1000	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	1000	-
Cl.13.1 of Cl.13(General)	-	1000	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	1000	-
Cl.13.3 of Cl.13(Clearances)	-	1000	-
Cl.13.3.1 of Cl.13.3(General)	-	1000	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	1000	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	1000	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	1000	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	1000	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	1000	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	1000	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	1000	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	1000	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	1000	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	1000	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	1000	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	1000	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	1000	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	1000	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	1000	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	1000	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	1000	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	1000	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	1000	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	1000	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	1000	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	1000	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	1000	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	1000	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	1000	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	1000	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	1000	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	1000	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	1000	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	1000	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	1000	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	1000	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	1000	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	1000	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	1000	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	1000	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	1000	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	1000	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	1000	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	1000	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	1000	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	1000	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	1000	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	1000	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	1000	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	1000	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	1000	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	1000	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	1000	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	1000	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	1000	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	1000	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	1000	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	1000	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	1000	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	1000	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	1000	-
Cl.19.1 of Cl.19(Stability requirements)	-	1000	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	1000	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	1000	-
Cl.19.3 of Cl.19(Vertical force test )	-	1000	-
Cl.19.4 of Cl.19(Horizontal force test)	-	1000	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	1000	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	1000	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	1000	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	1000	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	1000	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	1000	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	1000	-
Cl.20.1 of Cl.20(Requirements)	-	1000	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	1000	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	1000	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	1000	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	1000	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	1000	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	1000	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	1000	-
5(Marking and instructions)	-	1000	-
7(Heating under normal operating conditions)	-	1000	-
8(Constructional requirements with regard to the protection against electric shock)	-	1000	-
9(Electric shock hazard under normal operating conditions)	-	1000	-
10(Insulation requirements)	-	1000	-
11(Fault conditions)	-	1000	-
12(Mechanical strength)	-	1000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	-
15(TERMINALS)	-	1000	-
16(External flexible cords)	-	1000	-
17(Electrical connections and mechanical fixings)	-	1000	-
19(Stability and mechanical hazards)	-	1000	-
20(Resistance to fire)	-	1000	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	1000	-
8.16(Wound Component)	-	1000	-
15(Internal wires and power cords)	-	1000	-
16.3b(Cord Bending Test)	-	1000	-
20.2.4(Printed Boards)	-	1000	-
3(General requirements)	-	1000	-
4(General test conditions)	-	1000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	1000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	1000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	1000	-
Cl.5.1 of Cl.5(General requirements)	-	1000	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	1000	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	1000	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	1000	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	1000	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	1000	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	1000	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	1000	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	1000	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	1000	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	1000	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	1000	-
Cl.5.3 of Cl.5(Terminals)	-	1000	-
Cl.5.3a) of Cl.5(Earth terminal)	-	1000	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	1000	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	1000	-
Cl.5.4 of Cl.5(Caution marking)	-	1000	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	1000	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	1000	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	1000	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	1000	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	1000	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	1000	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	1000	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	1000	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	1000	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	1000	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	1000	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	1000	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	1000	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	1000	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	1000	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	1000	-
Cl.7.1 of Cl.7(General)	-	1000	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	1000	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	1000	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	1000	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	1000	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	1000	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	1000	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	1000	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	1000	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	1000	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	1000	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	1000	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	1000	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	1000	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	1000	-
Cl.8.6 of Cl.8(Class II apparatus)	-	1000	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	1000	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	1000	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	1000	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	1000	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	1000	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	1000	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	1000	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	1000	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	1000	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	1000	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	1000	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	1000	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	1000	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	1000	-
Cl.8.11 of Cl.8(Detaching of wires)	-	1000	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	1000	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	1000	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	1000	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	1000	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	1000	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	1000	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	1000	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	1000	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	1000	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	1000	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	1000	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	1000	-
Cl.9.1 of Cl.9(Testing on the outside)	-	1000	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	1000	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	1000	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	1000	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	1000	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	1000	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	1000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	1000	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	1000	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	1000	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	1000	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	1000	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	1000	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	1000	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	1000	-
Cl.10.2 of Cl.10(Surge Test)	-	1000	-
Cl.10.2 a) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	1000	-
Cl.10.3 of Cl.10(Humidity treatment)	-	1000	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	1000	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	1000	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	1000	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	1000	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	1000	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.2 of Cl.11(Heating)	-	1000	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	1000	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	1000	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	1000	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	1000	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	1000	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	1000	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	1000	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	1000	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	1000	-
Cl.11.2.6 of Cl.11.2(Windings )	-	1000	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	1000	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	1000	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	1000	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	1000	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	1000	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	1000	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	1000	-
Cl.12.4 of Cl.12(Drawers )	-	1000	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	1000	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	1000	-
Cl.12.5 b) of Cl.12(Impact test,)	-	1000	-
Cl.12.5 c) of Cl.12(Torque test)	-	1000	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	1000	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	1000	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	1000	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	1000	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	1000	-
Cl.12.7.3 of Cl.12.7(Tests)	-	1000	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	1000	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	1000	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	1000	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	1000	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	1000	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	1000	-
Cl.13.1 of Cl.13(General)	-	1000	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	1000	-
Cl.13.3 of Cl.13(Clearances)	-	1000	-
Cl.13.3.1 of Cl.13.3(General)	-	1000	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	1000	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	1000	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	1000	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	1000	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	1000	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	1000	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	1000	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	1000	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	1000	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	1000	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	1000	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	1000	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	1000	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	1000	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	1000	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	1000	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	1000	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	1000	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	1000	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	1000	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	1000	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	1000	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	1000	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	1000	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	1000	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	1000	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	1000	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	1000	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	1000	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	1000	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	1000	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	1000	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	1000	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	1000	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	1000	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	1000	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	1000	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	1000	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	1000	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	1000	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	1000	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	1000	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	1000	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	1000	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	1000	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	1000	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	1000	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	1000	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	1000	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	1000	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	1000	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	1000	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	1000	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	1000	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	1000	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	1000	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	1000	-
Cl.19.1 of Cl.19(Stability requirements)	-	1000	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	1000	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	1000	-
Cl.19.3 of Cl.19(Vertical force test )	-	1000	-
Cl.19.4 of Cl.19(Horizontal force test)	-	1000	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	1000	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	1000	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	1000	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	1000	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	1000	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	1000	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	1000	-
Cl.20.1 of Cl.20(Requirements)	-	1000	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	1000	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	1000	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	1000	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	1000	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	1000	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	1000	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	1000	-

15 Oct, 2027

-
Included .w.e.f.29.11.2024 Exclusion CL 6 (Hazardous radiations) CL 14 (Components) CL 18 (Mechanical strength of picture tubes and protection against the effects of implosion) CL 6.1 (Ionizing radiation) CL 6.2 (Laser Radiation) CL 6.3

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(POWER INPUT AND CURRENT)	-	1500	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(IMPULSE VOLTAGE TEST)	-	1000	-
15(HUMIDITY TREATMENT TEST)	-	2500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	2000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1500	-
22(CONSTRUCTION)	-	1500	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	-
27(PROVISION FOR EARTHING)	-	2500	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.32(Oxygen bomb for rubber material)	-	2000	-
22.46(Software)	-	1000	-
Cl-19.11.4.1(Electrostatic discharge)	-	1000	-
Cl-19.11.4.3(Fast transient bursts)	-	1000	-
Cl-19.11.4.4(Surge Immunity test)	-	1000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	1000	-
Cl-19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.26.11.2024 exclusion Cl-19.11.4.2 (Radiated Fields) Cl-19.11.4.5 (Immunity to conducted discharge)

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
14(Transient overvoltages)	-	1500	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1500	-
20(Stability and mechanical hazards)	-	2000	-
21(Mechanical strength)	-	1500	-
22(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1500	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1500	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-

15 Oct, 2027

-
Included w.e.f.26.11.2024 Exclusion 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges)

IS 17681 (2022)

Specification for Bottled water dispensers

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	3000	-
4.1(General Design)	-	3000	-
4.2(Materials)	-	3000	-
4.3(Finish)	-	3000	-
4.4(Thermal Insulation)	-	3000	-
4.5(Hardware)	-	3000	-
4.6(Disposal of Waste Water)	-	3000	-
4.7(Hot Water Tank)	-	3000	-
4.8(Hermetically Sealed Compressor)	-	3000	-
4.9(Protective Guards)	-	3000	-
5(Refrigeration System)	-	3000	-
5.1(Pipes and Connections/Fitting)	-	3000	-
5.2(Control of Operation)	-	5000	-
6.1(General)	-	5000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	10000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	10000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	10000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	10000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	10000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	10000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	10000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	1000	-
6.2(Electrical Accessories)	-	1000	-
6.3(Salt Mist Test)	-	10000	-
7(Sound pressure level)	-	10000	-
10.1(Cooling Capacity Test)	-	5000	-
10.2(Maximum Operating Condition Test (Environmental))	-	5000	-
10.3(Maximum Operating Condition Test (Voltage))	-	5000	-
10.4(Heating Capacity Test)	-	5000	-
10.5(Annual Energy Consumption Test)	-	5000	-
10.6(Freeze-up Test)	-	5000	-
10.7(Door Opening and Closing Test)	-	5000	-
10.8(Door Seal Test)	-	5000	-
10.9(Pull-down Test)	-	5000	-
11(Marking and instruction)	-	5000	-

15 Oct, 2027

-
Included w.e.f.23.07.2025

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	-
5(General Safety Considerations)	-	2000	-
5.1(General)	-	2000	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	2000	-
5.6(Assembly of Cells into batteries)	-	2000	-
5.7(Quality Plan)	-	2000	-
5.8(Battery Safety Components)	-	2000	-
6(Type Test and Sample Size)	-	2000	-
7(Specific requirements and tests)	-	2000	-
7.1(Charging procedure for test purposes)	-	2000	-
7.2(Intended Use)	-	2000	-
7.3(Reasonably foreseeable misuse)	-	2000	-
8(Information for safety)	-	2000	-
8.1(General)	-	2000	-
8.2(Small Cell and battery safety information)	-	2000	-
9(Marking)	-	2000	-
9.1(Cell Marking)	-	2000	-
9.2(Battery Marking)	-	2000	-
9.3(Caution for ingestion of small cells and batteries)	-	2000	-
9.4(Other information)	-	2000	-
10(Packaging)	-	2000	-
4(Parameter Measurement Tolerances)	-	2000	-
5(General Safety Considerations)	-	2000	-
5.1(General)	-	2000	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	2000	-
5.6(Assembly of Cells into batteries)	-	2000	-
5.7(Quality Plan)	-	2000	-
5.8(Battery Safety Components)	-	2000	-
6(Type Test and Sample Size)	-	2000	-
7(Specific requirements and tests)	-	2000	-
7.1(Charging procedure for test purposes)	-	2000	-
7.2(Intended Use)	-	2000	-
7.3(Reasonably foreseeable misuse)	-	2000	-
8(Information for safety)	-	2000	-
8.1(General)	-	2000	-
8.2(Small Cell and battery safety information)	-	2000	-
9(Marking)	-	2000	-
9.1(Cell Marking)	-	2000	-
9.2(Battery Marking)	-	2000	-
9.3(Caution for ingestion of small cells and batteries)	-	2000	-
9.4(Other information)	-	2000	-
10(Packaging)	-	2000	-

15 Oct, 2027

-
Included w.e.f.14.11.2024

IS 16046 : Part 1 (2018)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	-
5(General Safety Considerations)	-	2000	-
5.1(General)	-	1000	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	2000	-
5.4(Temperature, Voltage and Current Management)	-	2000	-
5.5(Terminal Contacts)	-	1000	-
5.6(Assembly of Cells into batteries)	-	3000	-
5.7(Quality Plan)	-	1000	-
6(Tyoe Test amd Sample Size)	-	1000	-
7(Specific requirements and tests)	-	1000	-
7.1(Charging procedure for test purposes)	-	1000	-
7.2(Intended Use)	-	1000	-
7.3(Reasonably foreseeable misuse)	-	1000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	1000	-
9(Marking)	-	2000	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	1000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	1000	-

15 Oct, 2027

-
Included w.e.f.14.11.2024

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	500	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	500	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	1000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	500	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	1000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	1000	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	500	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
1.5(Components)	-	500	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	-
2.10.5.4(Opto-coupler)	-	500	-
2.10.5.6(Thin sheet materials)	-	1000	-
2.10.5.11(SMPS Transformer and Inductor)	-	1000	-
2.10.5.12(Wires in wound components)	-	1000	-
2.10.5.13(Winding wire)	-	500	-
2.10.5.14(Additional insulation in wound components)	-	500	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	1000	-
2.10.8.4(Abrasion resistance test)	-	1000	-
2.10.9(Thermal Cycling)	-	1000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	-
2.10.12(Enclosed and sealed parts)	-	500	-
3.1.4(Internal wire)	-	500	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	-
4.2.8(Cathode Ray Tubes)	-	500	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	1000	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	1000	-
4.3.13.2(Ionizing radiation)	-	1000	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.5(LED, laser class)	-	500	-
Annex A3(Hot flaming oil test)	-	1000	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	1000	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	1000	-
Annex K(Thermal Control)	-	1000	-
Annex Q(Voltage Dependent Resistors)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	1000	-
Annex C(Transformers)	-	1000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-
4.6.2(Bottoms of fire enclosures)	-	500	-
1.5(Components)	-	500	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	500	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	500	-
2.3(TNV circuits)	-	500	-
2.4(Limited current circuits)	-	500	-
2.5(Limited power sources .)	-	500	-
2.6(Provisions for earthing and bonding)	-	500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	-
2.8(Safety interlocks)	-	500	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	1000	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	500	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	1000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	1000	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
1.5(Components)	-	1000	-
2.8.2/2.8.5(Interlock switches)	-	1000	-
2.8.7(Switches and Relay)	-	1000	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	-
2.10.5.4(Opto-coupler)	-	500	-
2.10.5.6(Thin sheet materials)	-	1000	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.5.12(Wires in wound components)	-	500	-
2.10.5.13(Winding wire)	-	1000	-
2.10.5.14(Additional insulation in wound components)	-	1000	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	500	-
2.10.8.4(Abrasion resistance test)	-	1000	-
2.10.9(Thermal Cycling)	-	1000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	-
2.10.12(Enclosed and sealed parts)	-	1000	-
3.1.4(Internal wire)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	-
4.2.8(Cathode Ray Tubes)	-	1000	-
4.3.8(Batteries)	-	1000	-
4.3.10(Dust, powders, liquids and gases)	-	1000	-
4.3.11(Containers for liquids or gases)	-	1000	-
4.3.12(Flammable liquids)	-	1000	-
4.3.13.2(Ionizing radiation)	-	1000	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.5(LED, laser class)	-	1000	-
Annex A3(Hot flaming oil test)	-	1500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	1000	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	500	-
Annex K(Thermal Control)	-	500	-
Annex Q(Voltage Dependent Resistors)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	1000	-
Annex C(Transformers)	-	1000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-
4.6.2(Bottoms of fire enclosures)	-	1000	-
1.5(Components)	-	1000	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	1500	-
2.1(Protection from electric shock and energy hazards)	-	1500	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1500	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	1000	-
2.9(Electrical insulation)	-	1500	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	1500	-
3.3(Wiring terminals for connection of external conductors)	-	1500	-
3.4(Disconnection from the mains supply)	-	1500	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	1000	-
4.2(Mechanical strength)	-	1500	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	1500	-
4.5(Thermal requirements)	-	1000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	1000	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
1.5(Components)	-	1000	-
2.8.2/2.8.5(Interlock switches)	-	1000	-
2.8.7(Switches and Relay)	-	1000	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	-
2.10.5.4(Opto-coupler)	-	1000	-
2.10.5.6(Thin sheet materials)	-	1000	-
2.10.5.11(SMPS Transformer and Inductor)	-	1000	-
2.10.5.12(Wires in wound components)	-	1000	-
2.10.5.13(Winding wire)	-	1000	-
2.10.5.14(Additional insulation in wound components)	-	1000	-
2.10.6(PCB material)	-	1000	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	1000	-
2.10.8.4(Abrasion resistance test)	-	1000	-
2.10.9(Thermal Cycling)	-	1000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	-
2.10.12(Enclosed and sealed parts)	-	1000	-
3.1.4(Internal wire)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	-
4.2.8(Cathode Ray Tubes)	-	1000	-
4.3.8(Batteries)	-	1000	-
4.3.10(Dust, powders, liquids and gases)	-	1500	-
4.3.11(Containers for liquids or gases)	-	1000	-
4.3.12(Flammable liquids)	-	1000	-
4.3.13.2(Ionizing radiation)	-	1500	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.5(LED, laser class)	-	1500	-
Annex A3(Hot flaming oil test)	-	1000	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	1500	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	1000	-
Annex K(Thermal Control)	-	1000	-
Annex Q(Voltage Dependent Resistors)	-	1000	-
Annex B(Motor tests under abnormal conditions)	-	1000	-
Annex C(Transformers)	-	1500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1500	-
Annex EE(Household and home/ office document/ media shredders)	-	1500	-
4.6.2(Bottoms of fire enclosures)	-	1000	-
1.5(Components)	-	500	-
1.6(Power interface .)	-	500	-
1.7(Markings and instructions)	-	500	-
2.1(Protection from electric shock and energy hazards)	-	500	-
2.2(SELV circuits)	-	500	-
2.3(TNV circuits)	-	500	-
2.4(Limited current circuits)	-	500	-
2.5(Limited power sources .)	-	500	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	-
2.8(Safety interlocks)	-	500	-
2.9(Electrical insulation)	-	500	-
2.10(Clearances, creepage distances and distances through insulation)	-	500	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	500	-
4.3(Design and construction)	-	500	-
4.4(Protection against hazardous moving parts)	-	500	-
4.5(Thermal requirements)	-	500	-
4.6(Openings in enclosures)	-	500	-
4.7(Resistance to fire)	-	500	-
5.1(Touch current and protective conductor curren)	-	500	-
5.2(Electric strength)	-	500	-
5.3(Abnormal operating and fault conditions)	-	500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	500	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	500	-
6.3(Protection of the telecommunication wiring system from overheating)	-	500	-
7.1(General)	-	100	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	-
7.4(Insulation between primary circuits and cable distribution systems)	-	500	-
1.5(Components)	-	500	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	500	-
2.10.5.6(Thin sheet materials)	-	500	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.5.12(Wires in wound components)	-	500	-
2.10.5.13(Winding wire)	-	500	-
2.10.5.14(Additional insulation in wound components)	-	500	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	500	-
2.10.8.4(Abrasion resistance test)	-	500	-
2.10.9(Thermal Cycling)	-	500	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	-
2.10.12(Enclosed and sealed parts)	-	500	-
3.1.4(Internal wire)	-	500	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	-
4.2.8(Cathode Ray Tubes)	-	500	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	500	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	500	-
4.3.13.2(Ionizing radiation)	-	500	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	0	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	0	-
4.3.13.5(LED, laser class)	-	500	-
Annex A3(Hot flaming oil test)	-	500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	500	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	500	-
Annex K(Thermal Control)	-	500	-
Annex Q(Voltage Dependent Resistors)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	500	-
Annex C(Transformers)	-	500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	-
Annex EE(Household and home/ office document/ media shredders)	-	500	-
4.6.2(Bottoms of fire enclosures)	-	500	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	500	-
2.1(Protection from electric shock and energy hazards)	-	500	-
2.2(SELV circuits)	-	500	-
2.3(TNV circuits)	-	500	-
2.4(Limited current circuits)	-	500	-
2.5(Limited power sources .)	-	500	-
2.6(Provisions for earthing and bonding)	-	500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	-
2.8(Safety interlocks)	-	500	-
2.9(Electrical insulation)	-	500	-
2.10(Clearances, creepage distances and distances through insulation)	-	500	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	500	-
4.3(Design and construction)	-	500	-
4.4(Protection against hazardous moving parts)	-	500	-
4.5(Thermal requirements)	-	500	-
4.6(Openings in enclosures)	-	500	-
4.7(Resistance to fire)	-	500	-
5.1(Touch current and protective conductor curren)	-	500	-
5.2(Electric strength)	-	500	-
5.3(Abnormal operating and fault conditions)	-	500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	500	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	500	-
6.3(Protection of the telecommunication wiring system from overheating)	-	500	-
7.1(General)	-	500	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	500	-
1.5(Components)	-	500	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	500	-
2.10.5.6(Thin sheet materials)	-	500	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.5.12(Wires in wound components)	-	500	-
2.10.5.13(Winding wire)	-	500	-
2.10.5.14(Additional insulation in wound components)	-	500	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	500	-
2.10.8.4(Abrasion resistance test)	-	500	-
2.10.9(Thermal Cycling)	-	1000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	-
2.10.12(Enclosed and sealed parts)	-	1000	-
3.1.4(Internal wire)	-	500	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	-
4.2.8(Cathode Ray Tubes)	-	500	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	500	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	500	-
Annex A3(Hot flaming oil test)	-	500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	500	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	500	-
Annex K(Thermal Control)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	500	-
Annex C(Transformers)	-	500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	-
Annex EE(Household and home/ office document/ media shredders)	-	500	-
4.6.2(Bottoms of fire enclosures)	-	500	-

15 Oct, 2027

-
Included w.e.f.26.11.2024 Exclusion 4.3.13.2 (Ionizing radiation) 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test) 4.3.13.4 (Human exposure to ultraviolet (UV) radiation) 4.3.13.5 (LED, laser class) 1.5 (Components) Annex EE (Household and home/ office document/ media shredders) Annex Q (Voltage Dependent Resistors) Annex K (Thermal Control) Annex CC (Evaluation of integrated circuit (IC) current limiters) Annex A3 (Hot flaming oil test) 4.3.12 (Flammable liquids) 4.3.11 (Containers for liquids or gases) 4.3.8 (Batteries) 4.2.8 (Cathode Ray Tubes) 3.2.5 (Non re-wirable plug with PVC sheathed cable) 2.10.12 (Enclosed and sealed parts) 3.1.4 (Internal wire)

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

25000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	250	20% discount to BIS
8.1,a(Marking )	-	250	20% discount to BIS
8.1,b(Marking )	-	250	20% discount to BIS
8.1,c(Marking )	-	250	20% discount to BIS
8.1,d(Marking )	-	250	20% discount to BIS
8.1,e(Marking )	-	250	20% discount to BIS
8.1,f(Marking )	-	250	20% discount to BIS
8.1,g(Marking )	-	250	20% discount to BIS
8.2(Marking )	-	250	20% discount to BIS
8.3,a(Marking )	-	250	20% discount to BIS
8.3,b(Marking )	-	250	20% discount to BIS
8.3,c(Marking )	-	250	20% discount to BIS
8.3,d(Marking )	-	250	20% discount to BIS
8.3,e(Marking )	-	250	20% discount to BIS
8.4(Marking )	-	250	20% discount to BIS
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	250	20% discount to BIS
6.2(Rating)	-	250	20% discount to BIS
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	250	20% discount to BIS
10.1(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.3(Speed Regulators)	-	250	20% discount to BIS
10.4(Speed Regulators)	-	250	20% discount to BIS
10.5(Speed Regulators)	-	250	20% discount to BIS
10.6(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.8(Speed Regulators)	-	250	20% discount to BIS
11.1(Starting)	-	250	20% discount to BIS
11.2(Starting)	-	250	20% discount to BIS
12(Interchangeability)	-	250	20% discount to BIS
13(Silent Operation)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
17(Test for Harmonic Distortion)	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	250	20% discount to BIS
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	250	20% discount to BIS
8.1,a(Marking )	-	250	20% discount to BIS
8.1,b(Marking )	-	250	20% discount to BIS
8.1,c(Marking )	-	250	20% discount to BIS
8.1,d(Marking )	-	250	20% discount to BIS
8.1,e(Marking )	-	250	20% discount to BIS
8.1,f(Marking )	-	250	20% discount to BIS
8.1,g(Marking )	-	250	20% discount to BIS
8.2(Marking )	-	250	20% discount to BIS
8.3(Marking )	-	250	20% discount to BIS
8.3,a(Marking )	-	250	20% discount to BIS
8.3,b(Marking )	-	250	20% discount to BIS
8.3,c(Marking )	-	250	20% discount to BIS
8.3,d(Marking )	-	250	20% discount to BIS
8.3,e(Marking )	-	250	20% discount to BIS
8.4(Marking )	-	250	20% discount to BIS
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	250	20% discount to BIS
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	250	20% discount to BIS
6.2(Rating)	-	250	20% discount to BIS
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	250	20% discount to BIS
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	250	20% discount to BIS
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	250	20% discount to BIS
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	250	20% discount to BIS
10.1(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.2(Speed Regulators)	-	250	20% discount to BIS
10.3(Speed Regulators)	-	250	20% discount to BIS
10.4(Speed Regulators)	-	250	20% discount to BIS
10.5(Speed Regulators)	-	250	20% discount to BIS
10.6(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.7(Speed Regulators)	-	250	20% discount to BIS
10.8(Speed Regulators)	-	250	20% discount to BIS
11.1(Starting)	-	250	20% discount to BIS
11.2(Starting)	-	250	20% discount to BIS
12(Interchangeability)	-	250	20% discount to BIS
13(Silent Operation)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.3 & Table 1(Test for Air Performance)	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.4(Measurement of Speed of the Fan )	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
14.5(Measurement of Power factor and Power Input)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
16(Endurance Test)	-	250	20% discount to BIS
17(Test for Harmonic Distortion)	-	250	20% discount to BIS
4(GENERAL REQUIREMENTS)	-	250	20% discount to BIS
5(GENERAL NOTES ON TESTS)	-	250	20% discount to BIS
15.1, 15.2(Air delivery and service value)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	250	20% discount to BIS
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	250	20% discount to BIS
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	250	20% discount to BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

20000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	1000	20% DISCOUNT TO BIS
31.0(Resistance To Rusting)	-	1000	20% DISCOUNT TO BIS
30.0(Resistance To Heat and Fire)	-	1000	20% DISCOUNT TO BIS
29.0(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
28.0(Screws and Connections)	-	1000	20% DISCOUNT TO BIS
27.0(Provision For Earthing)	-	1000	20% DISCOUNT TO BIS
26.0(Terminals for external conductors)	-	1000	20% DISCOUNT TO BIS
25.0(Supply Connection and External Flexible Cords)	-	1000	20% DISCOUNT TO BIS
24.0(Components)	-	1000	20% DISCOUNT TO BIS
23.0(Internal Wiring)	-	1000	20% DISCOUNT TO BIS
22.0(Construction)	-	1000	20% DISCOUNT TO BIS
21.0(Mechanical Strength)	-	1000	20% DISCOUNT TO BIS
20.0(Stability and mechanical hazards)	-	1000	20% DISCOUNT TO BIS
19.0(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
17.0(Overload Protection of transformer and associated circuit)	-	1000	20% DISCOUNT TO BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	20% DISCOUNT TO BIS
15.0(Moisture resistance)	-	1000	20% DISCOUNT TO BIS
14.0(Transient Overvoltage)	-	1000	20% DISCOUNT TO BIS
13.0(Leakage Current and electric strength at operating temperature)	-	1000	20% DISCOUNT TO BIS
11.0(Heating)	-	1000	20% DISCOUNT TO BIS
10.0(Input and Current)	-	1000	20% DISCOUNT TO BIS
8.0(Protection against access to live parts)	-	1000	20% DISCOUNT TO BIS
7.0(Classification)	-	1000	20% DISCOUNT TO BIS
6.0(Marking and Instructions)	-	1000	20% DISCOUNT TO BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% DISCOUNT TO BIS
19.11.4.3(Fast transient bursts)	-	1000	20% DISCOUNT TO BIS
19.11.4.4(Surge immunity test)	-	1000	20% DISCOUNT TO BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% DISCOUNT TO BIS
19.11.4.7(Harmonics)	-	1000	20% DISCOUNT TO BIS
4(GENERAL REQUIREMENT)	-	1000	20% DISCOUNT TO BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	20% DISCOUNT TO BIS
19.11.4.2(Radiated fields)	-	1000	20% DISCOUNT TO BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% DISCOUNT TO BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

15000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.16(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
10.14(Cord Grip Test)	-	1000	20% DISCOUNT TO BIS
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	1000	20% DISCOUNT TO BIS
10.12(Moisture Resistance Test)	-	1000	20% DISCOUNT TO BIS
10.11(Protection against Electric Shock)	-	1000	20% DISCOUNT TO BIS
10.1(Earthing Connection)	-	1000	20% DISCOUNT TO BIS
10.9(Fan Speed and Input)	-	1000	20% DISCOUNT TO BIS
10.8(Construction)	-	1000	20% DISCOUNT TO BIS
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	1000	20% DISCOUNT TO BIS
10.6(High Voltage Test)	-	1000	20% DISCOUNT TO BIS
10.5(Leakage Current)	-	1000	20% DISCOUNT TO BIS
10.4(Temperature-Rise Test)	-	1000	20% DISCOUNT TO BIS
10.3(Air Delivery Test)	-	1000	20% DISCOUNT TO BIS
9.0(Marking)	-	1000	20% DISCOUNT TO BIS
7.11(Oscillating Mechanism)	-	1000	20% DISCOUNT TO BIS
7.9(Interchangeability)	-	1000	20% DISCOUNT TO BIS
7.8(Speed Regulators)	-	1000	20% DISCOUNT TO BIS
6.0(Design and General Construction)	-	1000	20% DISCOUNT TO BIS
5.0(Rated Frequency)	-	1000	20% DISCOUNT TO BIS
4.0(Rated Voltages)	-	1000	20% DISCOUNT TO BIS
3.0(Size, Speed and Types)	-	1000	20% DISCOUNT TO BIS
7.1(Protection Against Electric Shock)	-	1000	20% DISCOUNT TO BIS
7.2(Electrical Insulation Under Normal Operating Conditions)	-	1000	20% DISCOUNT TO BIS
7.3(Temperature-rise)	-	1000	20% DISCOUNT TO BIS
7.5(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
7.6(Finish)	-	1000	20% DISCOUNT TO BIS
7.7(Insulating Materials)	-	1000	20% DISCOUNT TO BIS
7.10(Oscillating Mechanism)	-	1000	20% DISCOUNT TO BIS
8.1, 8.2(Air delivery and service value)	-	1000	20% DISCOUNT TO BIS

15 Oct, 2027

-
-

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

25000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	1000	20% DISCOUNT TO BIS
30.0(Resistance To Heat and Fire)	-	1000	20% DISCOUNT TO BIS
29.0(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
28.0(Screws and Connections)	-	1000	20% DISCOUNT TO BIS
27.0(Provision For Earthing)	-	1000	20% DISCOUNT TO BIS
26.0(Terminals for external conductors)	-	1000	20% DISCOUNT TO BIS
25.0(Supply Connection and External Flexible Cords)	-	1000	20% DISCOUNT TO BIS
23.0(Internal Wiring)	-	1000	20% DISCOUNT TO BIS
22.0(Construction)	-	1000	20% DISCOUNT TO BIS
21.0(Mechanical Strength)	-	1000	20% DISCOUNT TO BIS
20.0(Stability and mechanical hazards)	-	1000	20% DISCOUNT TO BIS
19.0(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
17.0(Overload Protection of transformer and associated circuit)	-	1000	20% DISCOUNT TO BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	20% DISCOUNT TO BIS
15.0(Moisture resistance)	-	1000	20% DISCOUNT TO BIS
14.0(Transient Overvoltage)	-	1000	20% DISCOUNT TO BIS
13.0(Leakage Current and electric strength at operating temperature)	-	1000	20% DISCOUNT TO BIS
11.0(Heating)	-	1000	20% DISCOUNT TO BIS
10.0(Input and Current)	-	1000	20% DISCOUNT TO BIS
8.0(Protection against access to live parts)	-	1000	20% DISCOUNT TO BIS
6.0(Classification)	-	1000	20% DISCOUNT TO BIS
7.0(Marking and Instructions)	-	1000	20% DISCOUNT TO BIS
24(Components)	-	1000	20% DISCOUNT TO BIS
19.11.4.7(Harmonics)	-	1000	20% DISCOUNT TO BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% DISCOUNT TO BIS
19.11.4.4(Surge immunity test)	-	1000	20% DISCOUNT TO BIS
19.11.4.3(Fast transient bursts)	-	1000	20% DISCOUNT TO BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% DISCOUNT TO BIS
4(GENERAL REQUIREMENTS)	-	1000	20% DISCOUNT TO BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	20% DISCOUNT TO BIS
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	1000	20% DISCOUNT TO BIS
19.11.4.2(Radiated fields)	-	1000	20% DISCOUNT TO BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% DISCOUNT TO BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

25000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
6(Classification )	-	1000	20% DISCOUNT TO BIS
6(Classification )	-	1000	20% DISCOUNT TO BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	20% DISCOUNT TO BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	20% DISCOUNT TO BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	20% DISCOUNT TO BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	20% DISCOUNT TO BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	20% DISCOUNT TO BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	20% DISCOUNT TO BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	20% DISCOUNT TO BIS
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	20% DISCOUNT TO BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	20% DISCOUNT TO BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	20% DISCOUNT TO BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	20% DISCOUNT TO BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	20% DISCOUNT TO BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	20% DISCOUNT TO BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	20% DISCOUNT TO BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	20% DISCOUNT TO BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	20% DISCOUNT TO BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	20% DISCOUNT TO BIS
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	500	20% DISCOUNT TO BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	500	20% DISCOUNT TO BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	500	20% DISCOUNT TO BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	500	20% DISCOUNT TO BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	500	20% DISCOUNT TO BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	500	20% DISCOUNT TO BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	500	20% DISCOUNT TO BIS
(Cl.22 of IS 2082:2018)(Finish)	-	500	20% DISCOUNT TO BIS
Cl.22 of IS 2082:2018(Finish)	-	500	20% DISCOUNT TO BIS
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	500	20% DISCOUNT TO BIS
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 2082:2018(Mixing Factor)	-	500	20% DISCOUNT TO BIS
Cl.18 of IS 2082:2018( Reheating Time)	-	500	20% DISCOUNT TO BIS
Cl.17 of IS 2082:2018(Hot Water Output)	-	500	20% DISCOUNT TO BIS
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	500	20% DISCOUNT TO BIS
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	500	20% DISCOUNT TO BIS
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	20% DISCOUNT TO BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	500	20% DISCOUNT TO BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	500	20% DISCOUNT TO BIS
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	20% DISCOUNT TO BIS
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	20% DISCOUNT TO BIS
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	20% DISCOUNT TO BIS
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	500	20% DISCOUNT TO BIS
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	20% DISCOUNT TO BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	500	20% DISCOUNT TO BIS
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	20% DISCOUNT TO BIS
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	20% DISCOUNT TO BIS
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	20% DISCOUNT TO BIS
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	500	20% DISCOUNT TO BIS
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	20% DISCOUNT TO BIS
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	20% DISCOUNT TO BIS
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	20% DISCOUNT TO BIS
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	20% DISCOUNT TO BIS
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	20% DISCOUNT TO BIS
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	20% DISCOUNT TO BIS
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	500	20% DISCOUNT TO BIS
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	500	20% DISCOUNT TO BIS
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	500	20% DISCOUNT TO BIS
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	500	20% DISCOUNT TO BIS
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	500	20% DISCOUNT TO BIS
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	500	20% DISCOUNT TO BIS
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	500	20% DISCOUNT TO BIS
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	500	20% DISCOUNT TO BIS
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	500	20% DISCOUNT TO BIS
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	500	20% DISCOUNT TO BIS
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	500	20% DISCOUNT TO BIS
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	500	20% DISCOUNT TO BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	500	20% DISCOUNT TO BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	20% DISCOUNT TO BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	20% DISCOUNT TO BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	20% DISCOUNT TO BIS
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	20% DISCOUNT TO BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	20% DISCOUNT TO BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	500	20% DISCOUNT TO BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	500	20% DISCOUNT TO BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	500	20% DISCOUNT TO BIS
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	500	20% DISCOUNT TO BIS
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	500	20% DISCOUNT TO BIS
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	500	20% DISCOUNT TO BIS
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	500	20% DISCOUNT TO BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	20% DISCOUNT TO BIS
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	20% DISCOUNT TO BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	20% DISCOUNT TO BIS
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	500	20% DISCOUNT TO BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	20% DISCOUNT TO BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	20% DISCOUNT TO BIS
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	500	20% DISCOUNT TO BIS
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	20% DISCOUNT TO BIS
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	20% DISCOUNT TO BIS
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	20% DISCOUNT TO BIS
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	500	20% DISCOUNT TO BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	500	20% DISCOUNT TO BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	500	20% DISCOUNT TO BIS
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	500	20% DISCOUNT TO BIS
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	20% DISCOUNT TO BIS
7.101(Marking : Indifiction of water inlet and water outlet )	-	500	20% DISCOUNT TO BIS
7.14(Marking : Legibility and durability)	-	500	20% DISCOUNT TO BIS
7.13(Marking : Official language of Instruction )	-	500	20% DISCOUNT TO BIS
7.11(Marking : Indication of controls )	-	500	20% DISCOUNT TO BIS
7.8(Marking : Terminals )	-	500	20% DISCOUNT TO BIS
7.6(Marking : Symbol used )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Warning for Open- outlet )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	500	20% DISCOUNT TO BIS
7.1(Marking : Statement for a pressure-relief device)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated capacity)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated pressure)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Country of manufacture)	-	500	20% DISCOUNT TO BIS
7.1(Marking: IP Number)	-	500	20% DISCOUNT TO BIS
7.1(Marking: Symbol for Class II)	-	500	20% DISCOUNT TO BIS
7.1(Marking: Model or type reference)	-	500	20% DISCOUNT TO BIS
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated power input)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Symbol for nature of supply )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated Voltage )	-	500	20% DISCOUNT TO BIS
Cl.32 of IS 302-1:2008()	-	500	20% DISCOUNT TO BIS
4(GENERAL REQUIREMENT)	-	500	20% DISCOUNT TO BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	20% DISCOUNT TO BIS
12(THERMOSTAT SETTING)	-	500	20% DISCOUNT TO BIS
Cl-10(Mounting of the water heater)	-	500	20% DISCOUNT TO BIS
Cl-11(Measurements of stored water temperature)	-	500	20% DISCOUNT TO BIS
Cl-12(Thermostat setting)	-	500	20% DISCOUNT TO BIS
Cl-13(Measurement of energy consumption)	-	500	20% DISCOUNT TO BIS
Cl-14(Verification of the rated capacity)	-	500	20% DISCOUNT TO BIS

15 Oct, 2027

-
-

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

150000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2.12(Temperature rise test)	-	5000	20% discount to BIS
10.2.11(Measurement )	-	5000	20% discount to BIS
10.2.10.1(Test packages and life time)	-	5000	20% discount to BIS
10.2.10(Full load test)	-	5000	20% discount to BIS
10.2.8(Earth resistance test )	-	5000	20% discount to BIS
10.2.7(Leakage current test )	-	5000	20% discount to BIS
10.2.6(Insulation resistance test)	-	5000	20% discount to BIS
10.2.5(High voltage test)	-	5000	20% discount to BIS
10.2.3(Thermal insulation test )	-	5000	20% discount to BIS
10.2.2(Machanical strength of shelves and similar components)	-	5000	20% discount to BIS
10.2.1(Door seal test )	-	5000	20% discount to BIS
9.2.2(Power consumption & percentage running time)	-	5000	20% discount to BIS
9.2.1(Pull down time)	-	10000	20% discount to BIS
9.1(No load test)	-	5000	20% discount to BIS
6.11(Volume measurement Water fill method)	-	5000	20% discount to BIS
6(Measurement of freezer storage capacity)	-	5000	20% discount to BIS
5.1(Sound level)	-	5000	20% discount to BIS
5.6(External surface condensation test)	-	5000	20% discount to BIS
5.5(Strength Pressure test for components)	-	5000	20% discount to BIS
4.8(Doors & Fittings)	-	5000	20% discount to BIS
13(Marking and Instruction)	-	5000	20% discount to BIS
11.7(Pressure Test)	-	5000	20% discount to BIS
11.6(Thermal Insulation Test ( External Condensation))	-	5000	20% discount to BIS
11.5(Mechanical Strength of Shelves and Similar Components)	-	5000	20% discount to BIS
11.4(Door Seal Test)	-	5000	20% discount to BIS
11.3(Temperature Rise Test)	-	5000	20% discount to BIS
11.2(Energy Consumption Test)	-	5000	20% discount to BIS
11.1(No load Pull down Test)	-	5000	20% discount to BIS
8(Freezer Storage Capacity)	-	5000	20% discount to BIS
7(Sound Pressure Level)	-	5000	20% discount to BIS
6(Safety Requirements)	-	5000	20% discount to BIS
5.4.4(Fatigue Test)	-	5000	20% discount to BIS
5.4.3(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
5.4.2(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
4.8(Door and Fittings)	-	5000	20% discount to BIS
13(Marking and Instruction)	-	5000	20% discount to BIS
11.7(Pressure Test)	-	5000	20% discount to BIS
11.6(Thermal Insulation Test ( External Condensation))	-	5000	20% discount to BIS
11.5(Mechanical Strength of Shelves and Similar Components)	-	5000	20% discount to BIS
11.4(Door Seal Test)	-	5000	20% discount to BIS
11.3(Temperature Rise Test)	-	5000	20% discount to BIS
11.2(Energy Consumption Test)	-	5000	20% discount to BIS
11.1(No load Pull down Test)	-	5000	20% discount to BIS
8(Freezer Storage Capacity)	-	5000	20% discount to BIS
7(Sound Pressure Level)	-	5000	20% discount to BIS
6(Safety Requirements)	-	5000	20% discount to BIS
5.4.4(Fatigue Test)	-	5000	20% discount to BIS
5.4.3(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
5.4.2(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
4.8(Door and Fittings)	-	5000	20% discount to BIS
5(Refrigeration system)	-	5000	20% discount to BIS
Cl-4.1(General Design)	-	5000	20% discount to BIS
Cl-4.2(Materials)	-	5000	20% discount to BIS
Cl-4.3(Finish)	-	5000	20% discount to BIS
Cl-4.4(Thermal Insulation)	-	5000	20% discount to BIS
Cl-4.5(Fittings)	-	5000	20% discount to BIS
Cl-4.6(Hardware)	-	5000	20% discount to BIS
Cl-4.7(Interior Fittings)	-	5000	20% discount to BIS
Cl-4.8(Doors and Fittings)	-	5000	20% discount to BIS
Cl-4.9(Disposal of Defrost / Condensate Water)	-	5000	20% discount to BIS
Cl-5.1(Construction)	-	5000	20% discount to BIS
Cl-5.2(Control of Operation)	-	5000	20% discount to BIS
Cl-5.3(Location of Components)	-	5000	20% discount to BIS
6.5(For flammable refrigerant the units should comply with IS/IEC 60335-2-89)	-	5000	20% discount to BIS
6.2(The compressor shall comply with the requirements of IS 10617)	-	5000	20% discount to BIS

15 Oct, 2027

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

24000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	20% discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% discount to BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% discount to BIS
10.1(Power input)	-	1000	20% discount to BIS
10.2(Current input)	-	1000	20% discount to BIS
11.1(General)	-	1000	20% discount to BIS
11.2(General)	-	1000	20% discount to BIS
11.3(Heating)	-	1000	20% discount to BIS
13.1(General)	-	1000	20% discount to BIS
13.2(Leakage current at operating temperature)	-	1000	20% discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% discount to BIS
14(Transient Over Voltages)	-	1000	20% discount to BIS
15.0(General)	-	1000	20% discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% discount to BIS
15.2(Spillage Test)	-	1000	20% discount to BIS
15.3(Humidity Test)	-	1000	20% discount to BIS
16.0(General)	-	1000	20% discount to BIS
16.1(General)	-	1000	20% discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% discount to BIS
18(Endurance Test requirements and tests)	-	1000	20% discount to BIS
19(Abnormal Operation)	-	1000	20% discount to BIS
20(Stability test)	-	1000	20% discount to BIS
21(Mechanical Strength Test)	-	1000	20% discount to BIS
22(Construction verification related test)	-	1000	20% discount to BIS
23(General)	-	1000	20% discount to BIS
24(Components)	-	1000	20% discount to BIS
25(Supply connection and external flexible cords)	-	1000	20% discount to BIS
26(Terminals for external conductors)	-	1000	20% discount to BIS
27(Provision for earthing)	-	1000	20% discount to BIS
28(Screw test and connections)	-	1000	20% discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% discount to BIS
30.1(Ball pressure test)	-	1000	20% discount to BIS
30.2(Glow Wire Test)	-	1000	20% discount to BIS
30.2(Needle Flame Test)	-	1000	20% discount to BIS
31(Resistance to Rusting)	-	1000	20% discount to BIS
32(Radiation Toxicity and Similar Hazards)	-	1000	20% discount to BIS
4(General requirement)	-	1000	20% discount to BIS
16(Leakage current and electric strength)	-	1000	20% discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% discount to BIS
18(Endurance)	-	1000	20% discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% discount to BIS
11.4(Heating appliances)	-	1000	20% discount to BIS
11.5(Motor-operated appliances)	-	1000	20% discount to BIS
11.6(Combined appliances)	-	1000	20% discount to BIS
11.7(Duration corresponding)	-	1000	20% discount to BIS
11.8(Temperature rise)	-	1000	20% discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% discount to BIS
19.11.4.7(Harmonics)	-	1000	20% discount to BIS
4(General Requirement)	-	1000	20% discount to BIS
5(General conditions for tests)	-	1000	20% discount to BIS
6(Classification- IS 302-1)	-	1000	20% discount to BIS
19.11.4.2(Radiated fields)	-	1000	20% discount to BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% discount to BIS

15 Oct, 2027

view Scope file
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

55000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	1000	20% discount to BIS
6(CLASSIFICATION)	-	1000	20% discount to BIS
7(MARKING AND INSTRUCTIONS)	-	1000	20% discount to BIS
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	20% discount to BIS
10(POWER INPUT AND CURRENT)	-	1000	20% discount to BIS
11(HEATING)	-	1000	20% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% discount to BIS
14(TRANSIENT OVERVOLTAGES)	-	1000	20% discount to BIS
15(MOISTURE RESISTANCE)	-	1000	20% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% discount to BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000	20% discount to BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000	20% discount to BIS
18(ENDURANCE)	-	1000	20% discount to BIS
19(ABNORMAL OPERATION)	-	1000	20% discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% discount to BIS
19.11.4.7(Harmonics)	-	1000	20% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% discount to BIS
22(CONSTRUCTION)	-	1000	20% discount to BIS
23(INTERNAL WIRING)	-	1000	20% discount to BIS
24(COMPONENTS)	-	1000	20% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	20% discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% discount to BIS
19.13(ABNORMAL OPERATION)	-	1000	20% discount to BIS
19.101(Abnormal Operation)	-	1000	20% discount to BIS
19.102(Abnormal Operation)	-	1000	20% discount to BIS
19.11.4.2(Radiated fields)	-	1000	20% discount to BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% discount to BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

Evaporative Air Coolers (Desert Cooler)

67000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.3(BIS Certification Marking)	-	9500	20% discount to BIS
15( MARKING AND INFORMATION)	-	9500	20% discount to BIS
10.5( Stable Operating Conditions)	-	9500	20% discount to BIS
10.2(Standard Ratings)	-	9500	20% discount to BIS
10(GENERAL TEST CONDITIONS)	-	9500	20% discount to BIS
9.5( Energy Consumption)	-	9500	20% discount to BIS
9.3(Noise Level)	-	9500	20% discount to BIS
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	9500	20% discount to BIS
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	9500	20% discount to BIS
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	9500	20% discount to BIS
8.2.7( Finish )	-	9500	20% discount to BIS
8.2.6( Earthing Connections Tests)	-	9500	20% discount to BIS
8.2.5( Leakage Current)	-	9500	20% discount to BIS
8.2.4(Insulation Resistance Test)	-	9500	20% discount to BIS
8.2.3 (High Voltage Tests)	-	9500	20% discount to BIS
8.2.2(Protection against Electric Shock )	-	9500	20% discount to BIS
6(PERFORMANCE REQUIREMENTS)	-	9500	20% discount to BIS
15.3(BIS Certification Marking)	-	9500	20% discount to BIS
15( MARKING AND INFORMATION)	-	9500	20% discount to BIS
10.5( Stable Operating Conditions)	-	9500	20% discount to BIS
10.2(Standard Ratings)	-	9500	20% discount to BIS
10(GENERAL TEST CONDITIONS)	-	9500	20% discount to BIS
9.5( Energy Consumption)	-	9500	20% discount to BIS
9.3(Noise Level)	-	9500	20% discount to BIS
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	9500	20% discount to BIS
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	9500	20% discount to BIS
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	9500	20% discount to BIS
8.2.7( Finish )	-	9500	20% discount to BIS
8.2.6( Earthing Connections Tests)	-	9500	20% discount to BIS
8.2.5( Leakage Current)	-	9500	20% discount to BIS
8.2.4(Insulation Resistance Test)	-	9500	20% discount to BIS
8.2.3 (High Voltage Tests)	-	9500	20% discount to BIS
8.2.2(Protection against Electric Shock )	-	9500	20% discount to BIS
6(PERFORMANCE REQUIREMENTS)	-	9500	20% discount to BIS
5(Manufacture and construction)	-	9500	20% discount to BIS
7(Electrical equipment)	-	9500	20% discount to BIS
8.2.1(General running tests)	-	9500	20% discount to BIS
8.3.2(Rated frequency)	-	9500	20% discount to BIS
8.4.1 a)(Verification of marking)	-	9500	20% discount to BIS

15 Oct, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Classic Testing & Research Centre (B17), Noida

B-17, Sector-65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

7982333919 cbcd@classiclabindia.com

Scope List