BIS - LIMS (Laboratory Information Management System)

Gravitas Laboratories Private Limited, Greater Noida

Plot No. 95, Udyog Vihar Extn, Ecotech II, Surajpur I.A., Greater Noida, Gautam Buddha Nagar, Uttar Pradesh, 201306

7042049001 testinggravitas@gmail.com

Scope List

Reset

154 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

151

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	2500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
6(Freedom from defects:)	-	200	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	750	-
9.2, Table 3(Tensile Strength, MPa)	-	750	-
9.3, Table 3(Elongation ,Percent)	-	750	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	500	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	750	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
12(Diameter, mm)	-	100	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	100	-
12(Variation in Straightness)	-	200	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	200	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	200	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	200	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	200	-
Cl. 12 Table 9(Out of Square)	-	200	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	200	-
9.1/Table-3(0.2% proof stress/Yield stress)	-	750	-
12(Diameter)	-	100	-
9.4(Annealed Hardness)	-	500	-
Cl 9.1/Table-3(0.2% proof stress/Yield stress)	-	750	-
Cl 9.1/Table-3(Tensile strength)	-	750	-
Cl 9.1/Table-3(Elongation)	-	750	-
Cl12(Diameter)	-	100	-
Cl 9.4(Annealed Hardness)	-	500	-

-
Exclusion: Cl.4 (Corrosion test)

152

IS 210 (2009)

Grey iron castings - Specification (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
10.1(FREEDOM FROM DEFECTS)	-	200	-
10.2(FREEDOM FROM DEFECTS)	-	200	-
13(SIZE OF TEST BARS-Diameter)	-	100	-
13(SIZE OF TEST BARS-Length)	-	100	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	750	-
16, Table 3(Hardness Test)	-	500	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
10.1(FREEDOM FROM DEFECTS)	-	200	-
10.2(FREEDOM FROM DEFECTS)	-	200	-
13(SIZE OF TEST BARS-Diameter)	-	100	-
13(SIZE OF TEST BARS-Length)	-	100	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	750	-
16, Table 3(Hardness Test)	-	500	-
9(Microstructure)	-	500	-
9(Microstructure)	-	500	-

-
Exclusion: Cl.17 (Transverse), Cl.18 (Hydrostatic)

153

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	500	-
5.4.3(b)( Aggregate Abrasion Value)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	0	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	500	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	500	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	500	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	500	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	500	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	500	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	500	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	500	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	500	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	500	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	500	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	500	-
7.2(Moisture Content)	-	500	-
7.2(Bulking Of Fine Aggregate)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	500	-
7.2(Moisture Content)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.3(Elongation Index)	-	500	-
5.3(Flakiness Index)	-	500	-
5.6(Alkali Agregate Reaction )	-	500	-
5.7 table 3(WaterAbsorption)	-	500	-
5.7 table 3(Specific Gravity)	-	500	-
5.3(Flakiness & Elongation)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	500	-
Clause 5.6(Nature of Aggregate)	-	500	-
Clause 5.6(Dissolved Silica)	-	500	-
Clause 5.6(Reduction in Alkalinity)	-	500	-
Clause 5.1(General)	-	500	-
Clause 5.1(General)	-	500	-

-
Only for aggregates from natural sources

154

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	200	-
Clause.4.0(Carbon)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.4.0(Phosphorus)	-	500	-
Clause.4.0(Silicon)	-	500	-
Clause.4.0(Manganese)	-	500	-
Clause.6.0(Workmanship)	-	500	-
Clause.7.0(Straightness)	-	200	-
Clause.9.0(Length)	-	200	-
Clause.10.0(Dimensions and properties)	-	200	-
Clause.11.0(General)	-	200	-
Clause.11.0(Outside Dimension)	-	200	-
Clause.11.0(Thickness)	-	200	-
Clause.11.0(Thickness)	-	200	-
Clause.11.0(Concavity and Convexity)	-	200	-
Clause.11.0(Squareness of Sides)	-	200	-
Clause.11.0(External Corner Radiius)	-	200	-
Clause.11.0(Straightness and twist)	-	200	-
Clause.12.0(Dimension Tolerances)	-	500	-
Clause.12.0(Dimension Tolerances)	-	500	-
Clause.13.0(Surface Protection)	-	500	-
Clause.15.0(Tensile test)	-	750	-
Clause.15.0(Yield strength)	-	750	-
Clause.15.0(Elognation Percent)	-	750	-
6(Workmanship)	-	200	-
10(Dimensions and Properties)	-	200	-
11(Measurement of Shape and Size)	-	200	-
12(Dimensions and Tolerances)	-	500	-
13(Surface Protection)	-	500	-
15(Tensile Test)	-	750	-
Clause.10.0(Dimensions and properties)	-	500	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Gravitas Laboratories Private Limited, Greater Noida

Plot No. 95, Udyog Vihar Extn, Ecotech II, Surajpur I.A., Greater Noida, Gautam Buddha Nagar, Uttar Pradesh, 201306

7042049001 testinggravitas@gmail.com

Scope List