BIS - LIMS (Laboratory Information Management System)

Akshat Test Lab & Calibration Services, Ghaziabad

A-2/49,G.D.Steel Compound ,Site-4,Industrial Area, Sahibabad, Ghaziabad,U.P,201010, GHAZIABAD, Ghaziabad, Uttar Pradesh, 201010

8700840187 akshattestlabS@gmail.com

Scope List

Reset

43 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	100	-
9.1 (c)(Marking )	-	100	-
9.1 (d)(Marking )	-	100	-
9.1 (e)(Marking )	-	100	-
9.1 (f)(Marking )	-	100	-
9.2(Marking )	-	100	-
6.1(Design and General Construction)	-	500	-
6.2(Design and General Construction)	-	100	-
6.3(Design and General Construction)	-	100	-
6.5(Design and General Construction)	-	100	-
6.6(Design and General Construction)	-	100	-
9.5.1 , 7.3(Temperature Rise)	-	2000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	100	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	100	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	100	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	200	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	2000	-
9.5.3(High Voltage Test)	-	2000	-
9.5.5(Earthing Connection)	-	2000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	2000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	2000	-
8.1(Performance)	-	3000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1900	-
7.4.1(a)(Mechanical strength )	-	800	-
7.4.1(b)(Mechanical strength )	-	100	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	100	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	100	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	100	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.11.2(Environmental Tests)	-	100	-
9.5.11.3(Environmental Tests)	-	100	-
9.5.11.4(Environmental Tests)	-	100	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	100	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	100	-
9.5.13(Resistance to Rusting )	-	100	-
9.5.14(Checking of Dimensions)	-	100	-
7.1, 7.5.4(Insulation Resistance)	-	200	-
9.1(Marking )	-	0	-
9.1 (a)(Marking )	-	0	-
9.1 (b)(Marking )	-	0	-
9.1 (c)(Marking )	-	0	-
9.1 (d)(Marking )	-	0	-
9.1 (e)(Marking )	-	0	-
9.1 (f)(Marking )	-	0	-
9.2(Marking )	-	0	-
6.1(Design and General Construction)	-	0	-
6.2(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
9.5.1 , 7.3(Temperature Rise)	-	0	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	0	-
9.5.3(High Voltage Test)	-	0	-
9.5.5(Earthing Connection)	-	0	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	0	-
7.6(General and safety requirements)	-	0	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	0	-
8.2(Performance)	-	0	-
8.3(Performance)	-	0	-
9.5.7, 9.5.4(Moisture Resistance )	-	0	-
7.4.1(Mechanical strength )	-	0	-
7.4.1(a)(Mechanical strength )	-	0	-
7.4.1(b)(Mechanical strength )	-	0	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.10( Electrical Endurance Test)	-	0	-
9.5.11.2(Environmental Tests)	-	0	-
9.5.11.3(Environmental Tests)	-	0	-
9.5.11.4(Environmental Tests)	-	0	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.13(Resistance to Rusting )	-	0	-
9.5.14(Checking of Dimensions)	-	0	For Bis Only= ₹ 26000/-, And other = ₹ 40000/-
9.1 (a)(Marking )	-	0	-
9.1 (b)(Marking )	-	0	-
9.1 (c)(Marking )	-	0	-
9.1 (d)(Marking )	-	0	-
9.1 (e)(Marking )	-	0	-
9.1 (f)(Marking )	-	0	-
9.2(Marking )	-	0	-
6.1(Design and General Construction)	-	0	-
6.2(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
9.5.1 , 7.3(Temperature Rise)	-	0	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	0	-
9.5.3(High Voltage Test)	-	0	-
9.5.5(Earthing Connection)	-	0	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	0	-
7.6(General and safety requirements)	-	0	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	0	-
8.2(Performance)	-	0	-
8.3(Performance)	-	0	-
9.5.7, 9.5.4(Moisture Resistance )	-	0	-
7.4.1(a)(Mechanical strength )	-	0	-
7.4.1(b)(Mechanical strength )	-	0	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.10( Electrical Endurance Test)	-	0	-
9.5.11.2(Environmental Tests)	-	0	-
9.5.11.3(Environmental Tests)	-	0	-
9.5.11.4(Environmental Tests)	-	0	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.13(Resistance to Rusting )	-	0	-
9.5.14(Checking of Dimensions)	-	0	-
7.1, 7.5.4(Insulation Resistance)	-	0	-
9.1(Marking )	-	0	-
9.1 (a)(Marking )	-	0	-
9.1 (b)(Marking )	-	0	-
9.1 (c)(Marking )	-	0	-
9.1 (d)(Marking )	-	0	-
9.1 (e)(Marking )	-	0	-
9.1 (f)(Marking )	-	0	-
9.2(Marking )	-	0	-
6.1(Design and General Construction)	-	0	-
6.2(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
9.5.1 , 7.3(Temperature Rise)	-	0	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	0	-
9.5.3(High Voltage Test)	-	0	-
9.5.5(Earthing Connection)	-	0	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	0	-
7.6(General and safety requirements)	-	0	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	0	-
8.2(Performance)	-	0	-
8.3(Performance)	-	0	-
9.5.7, 9.5.4(Moisture Resistance )	-	0	-
7.4.1(Mechanical strength )	-	0	-
7.4.1(a)(Mechanical strength )	-	0	-
7.4.1(b)(Mechanical strength )	-	0	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.10( Electrical Endurance Test)	-	0	-
9.5.11.2(Environmental Tests)	-	0	-
9.5.11.3(Environmental Tests)	-	0	-
9.5.11.4(Environmental Tests)	-	0	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.13(Resistance to Rusting )	-	0	-
9.5.14(Checking of Dimensions)	-	0	-
9.1 (a)(Marking )	-	0	-
9.1 (b)(Marking )	-	0	-
9.1 (c)(Marking )	-	0	-
9.1 (d)(Marking )	-	0	-
9.1 (e)(Marking )	-	0	-
9.1 (f)(Marking )	-	0	-
9.2(Marking )	-	0	-
6.1(Design and General Construction)	-	0	-
6.2(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
9.5.1 , 7.3(Temperature Rise)	-	0	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	0	-
9.5.3(High Voltage Test)	-	0	-
9.5.5(Earthing Connection)	-	0	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	0	-
7.6(General and safety requirements)	-	0	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	0	-
8.2(Performance)	-	0	-
8.3(Performance)	-	0	-
9.5.7, 9.5.4(Moisture Resistance )	-	0	-
7.4.1(a)(Mechanical strength )	-	0	-
7.4.1(b)(Mechanical strength )	-	0	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.10( Electrical Endurance Test)	-	0	-
9.5.11.2(Environmental Tests)	-	0	-
9.5.11.3(Environmental Tests)	-	0	-
9.5.11.4(Environmental Tests)	-	0	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.13(Resistance to Rusting )	-	0	-
9.5.14(Checking of Dimensions)	-	0	-
7.1, 7.5.4(Insulation Resistance)	-	0	-
9.1(Marking )	-	0	-
9.1 (a)(Marking )	-	0	-
9.1 (b)(Marking )	-	0	-
9.1 (c)(Marking )	-	0	-
9.1 (d)(Marking )	-	0	-
9.1 (e)(Marking )	-	0	-
9.1 (f)(Marking )	-	0	-
9.2(Marking )	-	0	-
6.1(Design and General Construction)	-	0	-
6.2(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
9.5.1 , 7.3(Temperature Rise)	-	0	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	0	-
9.5.3(High Voltage Test)	-	0	-
9.5.5(Earthing Connection)	-	0	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	0	-
7.6(General and safety requirements)	-	0	-
7.7(Voltage drop)	-	0	-
8.1(Performance)	-	0	-
8.2(Performance)	-	0	-
8.3(Performance)	-	0	-
9.5.7, 9.5.4(Moisture Resistance )	-	0	-
7.4.1(Mechanical strength )	-	0	-
7.4.1(a)(Mechanical strength )	-	0	-
7.4.1(b)(Mechanical strength )	-	0	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	0	-
9.5.10( Electrical Endurance Test)	-	0	-
9.5.11.2(Environmental Tests)	-	0	-
9.5.11.3(Environmental Tests)	-	0	-
9.5.11.4(Environmental Tests)	-	0	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	0	-
9.5.13(Resistance to Rusting )	-	0	-
9.5.14(Checking of Dimensions)	-	0	-

-
Included w.e.f 28.07.2025

IS 1169 (1967)

Specification for electric pedestal type fans and regulators (First Revision)

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18( Tolerances on rating)	-	200	-
17(Performance Reqirement)	-	2000	-
16.14(Insulation-resistance )	-	500	-
16.13(Flash Test)	-	500	-
16.12(Measurement of Fan Speed)	-	500	-
16.11(Electrical Input Test)	-	500	-
16.1(Earthing Continuity Test)	-	500	-
16.9(High Voltage)	-	500	-
16.8(AC Leakage Test)	-	300	-
16.7(Power Factor)	-	300	-
16.6(Mechanical Endurance Test (for Regulators only))	-	300	-
16.5(Cord grip test)	-	300	-
16.4(Moisture Proofness Test (for Regulators only))	-	1000	-
16.3(Temperature-rise)	-	1300	-
16.2(Air Delivery Test)	-	2000	-
15(Marking)	-	500	-
14(Oscillating Mechanism)	-	200	-
13(Silent Operation)	-	300	-
12(Interchangeability)	-	300	-
11(Starting)	-	200	-
10(Speed Regulators)	-	500	-
9(Insulating Materials)	-	0	-
8(Height of the Fan)	-	200	-
7(Finish)	-	200	-
6(Design and General Construction)	-	0	-
5(Rated Frequency)	-	200	-
4(Rated Voltage)	-	200	-
3(Sizes, Speed & Types)	-	500	For BIS Only= ₹ 13800 Other charges = ₹ 40000
18( Tolerances on rating)	-	0	-
17(Performance Reqirement)	-	0	-
16.14(Insulation-resistance )	-	0	-
16.13(Flash Test)	-	0	-
16.12(Measurement of Fan Speed)	-	0	-
16.11(Electrical Input Test)	-	0	-
16.1(Earthing Continuity Test)	-	0	-
16.9(High Voltage)	-	0	-
16.8(AC Leakage Test)	-	0	-
16.7(Power Factor)	-	0	-
16.6(Mechanical Endurance Test (for Regulators only))	-	0	-
16.5(Cord grip test)	-	0	-
16.4(Moisture Proofness Test (for Regulators only))	-	0	-
16.3(Temperature-rise)	-	0	-
16.2(Air Delivery Test)	-	0	-
15(Marking)	-	0	-
14(Oscillating Mechanism)	-	0	-
13(Silent Operation)	-	0	-
12(Interchangeability)	-	0	-
11(Starting)	-	0	-
10(Speed Regulators)	-	0	-
9(Insulating Materials)	-	0	-
8(Height of the Fan)	-	0	-
7(Finish)	-	0	-
6(Design and General Construction)	-	0	-
5(Rated Frequency)	-	0	-
4(Rated Voltage)	-	0	-
3(Sizes, Speed & Types)	-	0	-

-
Included w.e.f 28.07.2025

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

17800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	200	-
Cl-5(General Conditions for the tests)	-	200	-
Cl-6(Classification)	-	500	-
Cl-7(Marking)	-	500	-
Cl-8(Safety Requirements)	-	5000	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	1800	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	500	-
Cl-13(Strength of Assembly)	-	1200	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	800	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	500	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	200	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	200	-
Cl-10.4(Idli Batter)	-	200	For BIS only: 17800 Rs. For other: 40000 Rs.
Cl-4(General Requirements)	-	0	-
Cl-5(General Conditions for the tests)	-	0	-
Cl-6(Classification)	-	0	-
Cl-7(Marking)	-	0	-
Cl-8(Safety Requirements)	-	0	-
Cl-9(Endurance fpr motor and base assembly)	-	0	-
Cl-10.5(Operational Tests for Juicers)	-	0	-
Cl-11(Temperature Withstand Test for Bowl)	-	0	-
Cl-12.1(Test for Switches)	-	0	-
Cl-13(Strength of Assembly)	-	0	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	-
Cl-10.4(Idli Batter)	-	0	-
Cl-4(General Requirements)	-	0	-
Cl-5(General Conditions for the tests)	-	0	-
Cl-6(Classification)	-	0	-
Cl-7(Marking)	-	0	-
Cl-8(Safety Requirements)	-	0	-
Cl-9(Endurance fpr motor and base assembly)	-	0	-
Cl-10.5(Operational Tests for Juicers)	-	0	-
Cl-11(Temperature Withstand Test for Bowl)	-	0	-
Cl-12.1(Test for Switches)	-	0	-
Cl-13(Strength of Assembly)	-	0	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	-
Cl-10.4(Idli Batter)	-	0	-
Cl-4(General Requirements)	-	0	-
Cl-5(General Conditions for the tests)	-	0	-
Cl-6(Classification)	-	0	-
Cl-7(Marking)	-	0	-
Cl-8(Safety Requirements)	-	0	-
Cl-9(Endurance fpr motor and base assembly)	-	0	-
Cl-10.5(Operational Tests for Juicers)	-	0	-
Cl-11(Temperature Withstand Test for Bowl)	-	0	-
Cl-12.1(Test for Switches)	-	0	-
Cl-13(Strength of Assembly)	-	0	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	-
Cl-10.4(Idli Batter)	-	0	-

-
Included w.e.f 28.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	200	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(Moisture resistance)	-	900	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	400	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	200	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	200	-
10.1(Power input)	-	200	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	400	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	400	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	200	-
21.3(Mechanical Strength, IS 302-1)	-	200	-
22.5(Construction)	-	200	-
22.6(Construction, IS 302-1)	-	200	-
22.11(Construction, IS 302-1)	-	200	-
22.16(Construction)	-	200	-
22.32(Construction, IS 302-1)	-	200	-
22.42(Construction)	-	200	-
23.3(Internal Wiring, IS 302-1)	-	200	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	200	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
26.5(Terminals for external conductors)	-	200	-
27.5(Provision for Earthing, IS 302-1)	-	200	-
28.1(Screws and connections)	-	100	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	For BIS only = Rs 19000/- For others = Rs 40000/-

-
Exclusion 19.11.4.1 to 19.11.4.7 (EMI/EMC) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	100	-
6(Standard ratings)	-	0	-
7(Classification)	-	100	-
8(Marking)	-	1000	-
9(Dimensions)	-	500	-
10(Protection against electric shock)	-	500	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	500	-
13(Construction)	-	1000	-
14(Switched lampholders)	-	500	-
15(Moisture resistance, insulation resistance and electrical strength)	-	1000	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	200	-
20(Resistance to heat, fire and tracking)	-	500	-
19(General resistance to heat)	-	500	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	500	-
Annex A(Season cracking/corrosion test)	-	500	-
12.4(Thermal tests)	-	500	-
9.1(Lampholder dimensions)	-	600	-
11.2(Terminals)	-	0	-
12.3(Provision for earthing)	-	600	-
13.1(Construction)	-	0	-
13.8(Construction)	-	0	-
14.4(Switched lampholders)	-	0	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	1000	-
16.7(Mechanical strength)	-	600	-
16.8(Mechanical strength)	-	600	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	For BIS only = Rs 13800/- Acceptance test = 12000/- For others = Rs 27000/-

-
-

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	100	-
7.2(Type of installation)	-	100	-
7.3(Types of inlets)	-	100	-
7.4(Clamping means)	-	100	-
7.5(Minimum temperature during installation)	-	100	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	100	-
7.9(The provision for fixing accessories to the boxes )	-	100	-
7.1(The method of fixing the terminals)	-	100	-
8.1(marking)	-	400	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	400	-
8.3(BIS Certification Marking)	-	400	-
9.0(Dimensions)	-	500	-
10.0(Protection against electric shock)	-	1000	-
11.0(PROVISION FOR EARTHING)	-	500	-
12.0(Constructions)	-	1000	-
13.0(Resistance to ingress of solid objects)	-	800	-
13.0(Resistance toharmful ingress of water)	-	1000	-
13.0(Resistance to ageing)	-	1200	-
14.0(insultation resistance)	-	1000	-
14.0(electric strength)	-	1500	-
15.0(Mechanical strength)	-	1500	-
16.0(resistance to heat)	-	1500	-
17.0(creepage distance)	-	1000	-
17.0(clearances)	-	1000	-
17.0(distance through seating compund)	-	1000	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	1000	-
19.0(Resistance to tracking)	-	1500	-
20.0(Resistance to corrosion)	-	500	-
21.0(Electromagnetic compatibility (EMC))	-	0	For BIS only = Rs 20000/- type tests, Acceptance test = Rs 10000/- For others = Rs 35000/-

-
-

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 IS 15787:2008(Ratings )	-	100	-
Cl.7 IS 15787:2008(Classification)	-	100	-
Cl.8 IS 15787:2008(Marking )	-	500	-
Cl.9 IS 15787:2008(Checking of dimension)	-	500	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	1000	-
Cl.11 IS 15787:2008(Provision for earthing )	-	500	-
Cl.12 IS 15787:2008(Terminals)	-	500	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	400	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	400	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	500	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	1000	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	1000	-
Cl.19 IS 15787:2008(Temperature rise )	-	1000	-
Cl.20 IS 15787:2008(Making & Breaking )	-	1000	-
Cl.21 IS 15787:2008(Normal operation )	-	1000	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	1000	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	1000	-
Cl.24 IS 15787:2008(Mechanical strength)	-	1000	-
Cl.25 IS 15787:2008(Resistance to heat )	-	1000	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	1000	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	1000	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1000	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	1000	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1000	For BIS only = Rs 19500/- For others = 30000/-

-
-

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	100	-
Cl.31(Verification)	-	100	-
Cl.30(Verification)	-	100	-
CL.29(Verification)	-	100	-
Cl.28(Verification)	-	100	-
Cl.27(Verification)	-	100	-
Cl.26(Verification)	-	100	-
Cl.25(Verification)	-	100	-
Cl.24(Verification)	-	100	-
Cl.23(Verification)	-	100	-
Cl.22(Verification)	-	100	-
Cl.21(Verification)	-	100	-
Cl.20(Verification)	-	200	-
Cl.19(Verification)	-	700	-
Cl. 16(Verification)	-	500	-
Cl.15.1(Moisture Resistance)	-	1000	-
Cl.14(Verification)	-	500	-
Cl.13(Verification)	-	500	-
Cl.11(Verification)	-	500	-
Cl.10(Verification)	-	500	-
Cl.8(Verification)	-	500	-
Cl. 7(Verification)	-	500	-
Cl. 6(Classification- IS 302-1)	-	500	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	300	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	100	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	0	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	0	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	0	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	0	-
Cl. 24 IS 302-2-9(Components)	-	0	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	0	-
Cl. 22 IS 302-2-9(Construction )	-	0	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	0	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	0	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	0	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	0	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	0	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	0	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 IS 302-2-9(Heating)	-	0	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	0	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	0	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	0	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
8(Protection against access to live parts)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
26(Terminals For External Conductors)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
8(Protection against access to live parts)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
15.1(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
16.3(Electric strength test)	-	0	-
16.3(Insulation resistance test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
30(Resistance to Heat & Fire)	-	0	For BIS only = 8500/- and other = 40000/-

-
Exclusion: Cl.19.11.4.1 to 19.11.4.7

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	100	-
11.1(Durability)	-	100	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	0	-
10.4(Flammability test- Unaffected portion)	-	100	-
10.4(Flammability test-Burning after flame removal)	-	200	-
table 1 e) 3) (IR constant- max. Temp)	-	250	-
table 1 e) 3) (IR constant- Room temp )	-	250	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	250	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	250	-
10.2(HV (room temperature))	-	0	-
10.1(HV (water immersion))	-	0	-
10.1(HV (water immersion))	-	0	-
10.8(Smoke density rating)	-	0	-
10.6(Halogen evolution)	-	0	-
10.7(Temperature index)	-	0	-
10.5(Oxygen index)	-	0	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	200	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	200	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	250	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	250	-
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	200	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	150	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	0	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	200	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	200	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	200	-
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	100	-
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	100	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	200	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	100	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	0	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	0	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	150	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	150	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	150	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	150	-
Table 1 iii) c) 3)(Elongation variation)	-	0	-
Table 1 iii) c) 3)(TS variation)	-	0	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	150	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	150	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	150	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	150	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	100	-
5.2(Application )	-	0	-
5.3(Thickness of Insulation)	-	100	-
9.1(Ovality)	-	0	-
9(Overall dimensions)	-	0	-
10.11(Per sulphate test (for tinned Cu cable only))	-	0	-
4.2(Conductor resistance test)	-	100	-
4.1(Wrapping test (for Al))	-	100	-
4.1(Tensile test (for Al)- After Stranding)	-	150	-
4.1(Tensile test (for Al)-Before Stranding)	-	150	-
4.1(Annealing test (for copper))	-	100	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	200	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	100	-
4.4(Joints in Conductor)	-	0	-
4.1(Conductor - Material)	-	0	-
4.1(Conductor - Material)	-	0	-
10.11(Persulphate Test )	-	0	-
12.0(Core identification)	-	100	-
4, IS 8130(Construction of conductor)	-	0	-
Table 2, IS 8130(No fo wire in a conductor)	-	100	-
8.3(Minimum thickness of Sheath)	-	100	-
8.3(Avarage thickness of Sheath)	-	100	-
5.3(Minimum thickness of insulation)	-	100	-
5.3(Avarage thickness of insulation)	-	100	-
Table 4(Copper purity test)	-	200	-
10.3(Spark test)	-	0	-
table 1, 4.2(insulation resistance test)	-	200	-
5.4(Mechanical properties before and after ageing)	-	100	-
10.3(Spark Test)	-	0	-
4.1(Material)	-	0	-
4.2(Electrical Resistance)	-	200	-
5(INSULATION)	-	0	-
6(FILLER)	-	0	-
7(BINDER TAPE)	-	0	-
8(SHEATH)	-	0	-
9(OVERALL DIMENSIONS)	-	100	-
10.1(High Voltage Test (Water Immersion Test))	-	200	-
10.2(High Voltage Test (at Room Temperature))	-	200	-
10.3(Spark Test)	-	200	-
10.4(Flammability Test)	-	200	-
10.5(Oxygen Index Test)	-	200	-
10.6(Test for Halogen Acid Gas Evolution)	-	200	-
10.7(Test for Temperature Index)	-	200	-
10.8(Smoke Density Rating)	-	200	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	100	-
10.1(Flex Test)	-	200	-
10.11(Persulphate Test)	-	100	-
11(IDENTIFICATION)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
13(CABLE CODE)	-	0	-
15(PACKING AND MARKING)	-	100	-
16.1(Construction)	-	100	-
16.2(Tests)	-	0	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	0	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	0	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	0	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	0	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	0	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Cl. 8.2(Application of Sheath)	-	0	Per core For BIS only = 9000/- & Others = 9000/-, Additional per core=5000/- additional if 'FR' For BIS only = 5000/- & Others = 10000/- additional if FR-LSH For BIS only = 15000/- & Others = 18000/-

-
-

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

11200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	700	-
29.0(Creepage Distances and Clearances)	-	500	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	700	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	500	-
21.0(Mechanical Strength)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	200	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	0	-
13.0(Leakage Current and electric strength at operating temperature)	-	300	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	500	-
8.0(Protection against access to live parts)	-	200	-
7.0(Classification)	-	0	-
6.0(Marking and Instructions)	-	300	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	For BIS only = Rs 11200/- & For others = Rs 30,000/-

-
Exclusion: Cl.19.11.4.1 to 19.11.4.7

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	100	-
Cl-7(Classification)	-	100	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	100	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	100	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	100	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	100	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	100	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	100	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	100	-
Cl-11(Provision for earthing)	-	250	-
Cl-12(Terminals)	-	250	-
Cl-13(Constructional requirements)	-	250	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	250	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	250	-
Cl-15.3(Resistance to Humidity)	-	250	-
Cl-16.1(General)	-	400	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	250	-
Cl-16.3(Electric Strength Test)	-	400	-
Cl-17(Temperature rise)	-	400	-
Cl-18(Making and breaking capacity)	-	500	-
Cl-19(Normal operation)	-	500	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	200	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	200	-
Cl-24.1(Resistance to abnormal heat and fire)	-	200	-
Cl-24.2(Resistance to tracking)	-	200	-
Cl-25(Resistance to rusting)	-	300	-
19.1(Test for Switches Intended for Inductive Loads)	-	300	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	300	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	200	-
13.5(Attachment of knobs)	-	100	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	50	6A & 6AX For BIS only = 8000/- & Others = 10000/- 10A & 10AX to 20A to 20AX For BIS only = 10000/- & Others = 15000-18000 32A For BIS only = 12000/-Others = 20000/-
12.3.12(Table 13)(Deflection Test Forces)	-	50	-

-
-

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	50	-
7.1.1(Accessories Classification)	-	50	-
7.1.2(Accessories Classification)	-	0	-
7.1.3(Accessories Classification)	-	0	-
7.1.4(Accessories Classification)	-	0	-
7.1.5(Accessories Classification)	-	0	-
7.2.1(Socket-Outlets Classification)	-	0	-
7.2.2(Socket-Outlets Classification)	-	0	-
7.2.3(Socket-Outlets Classification)	-	0	-
7.2.4(Socket-Outlets Classification)	-	0	-
7.3(Plug Classification)	-	0	-
8(Marking)	-	200	-
9(CHECKING OF DIMENSIONS)	-	250	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	350	-
11(Provision for earthing)	-	500	-
12(terminals)	-	400	-
13.1(Construction of fixed Socket Outlets)	-	250	-
13.2(Construction of fixed Socket Outlets)	-	0	-
13.3(Construction of fixed Socket Outlets)	-	0	-
13.4(Construction of fixed Socket Outlets)	-	0	-
13.5(Construction of fixed Socket Outlets)	-	0	-
13.6(Construction of fixed Socket Outlets)	-	0	-
13.7(Construction of fixed Socket Outlets)	-	0	-
13.8(Construction of fixed Socket Outlets)	-	0	-
13.9(Construction of fixed Socket Outlets)	-	0	-
13.10(Construction of fixed Socket Outlets)	-	0	-
13.11(Construction of fixed Socket Outlets)	-	0	-
13.12(Construction of fixed Socket Outlets)	-	0	-
13.13(Construction of fixed Socket Outlets)	-	0	-
13.14(Construction of fixed Socket Outlets)	-	0	-
13.15(Construction of fixed Socket Outlets)	-	0	-
13.16(Construction of fixed Socket Outlets)	-	0	-
13.17(Construction of fixed Socket Outlets)	-	0	-
13.18(Construction of fixed Socket Outlets)	-	0	-
13.19(Construction of fixed Socket Outlets)	-	0	-
13.2(Construction of fixed Socket Outlets)	-	0	-
13.21(Construction of fixed Socket Outlets)	-	0	-
13.22(Construction of fixed Socket Outlets)	-	0	-
13.23(Construction of fixed Socket Outlets)	-	0	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	250	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.10(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.20(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
15(INTERLOCKED SOCKET-OUTLETS)	-	250	-
16.1(Resistance to Ageing)	-	1000	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	-
16.3(Resistance to Humidity)	-	0	-
17.1(RESISTANCE AND ELECTRIC STRENGTH)	-	600	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
18(OPERATION OF EARTHING CONTACTS)	-	450	-
19(TEMPERATURE RISE)	-	450	-
20(Making & Breaking Capacity)	-	350	-
21(Normal Operation)	-	250	-
22.1(Verification of the Maximum Withdrawal Force)	-	250	-
22.2(Verification of Minimum Withdrawal Force)	-	0	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	200	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-	600	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	-
24.8(MECHANICAL STRENGTH For shuttered socketoutlets)	-	0	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.11(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	0	-
24.12(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	0	-
24.13(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	0	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socketoutlets)	-	0	-
24.15(MECHANICAL STRENGTH)	-	0	-
24.16(MECHANICAL STRENGTH)	-	0	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	0	-
25.1(Resistance to heat)	-	200	-
25.2(Resistance to heat)	-	0	-
25.3(Resistance to heat)	-	0	-
25.4(Resistance to heat)	-	0	-
26.1(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	350	-
26.2(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.3(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.4(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	450	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	0	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	0	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	0	-
29(Resistance to Rusting)	-	350	-
28.2(Resistance to Tracking)	-	550	-
28.1.1(Glow-Wire Test)	-	0	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	250	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
26.7(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.6(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.5(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	6A Plug & Socket For BIS only = 8000/- others= 15000/- More than 6A & up to16A Plug & Socket For BIS only = 9800/- others= 18000/ 6/16A Combined Socket For BIS only = 9800/-others= 18000/

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	100	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	250	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	350	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	350	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	350	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	100	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	250	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	250	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	250	-
10.1(Speed Regulators)	-	250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	250	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	250	-
13(Silent Operation)	-	250	-
14.3 & Table 1(Test for Air Performance)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	100	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	For BIS only = 14800/- (for safety standard testing charges separate) For others = 30000/-

-
-

Bureau of Indian Standards

The National Standards Body of India

Akshat Test Lab & Calibration Services, Ghaziabad

A-2/49,G.D.Steel Compound ,Site-4,Industrial Area, Sahibabad, Ghaziabad,U.P,201010, GHAZIABAD, Ghaziabad, Uttar Pradesh, 201010

8700840187 akshattestlabS@gmail.com

Scope List