BIS - LIMS (Laboratory Information Management System)

Atharva Laboratories Pvt. Ltd. (C-54), Noida

C-54, Hosiery Complex, Phase-II, Noida-201305, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 atharvalaboratories2@gmail.com

Scope List

Reset

51 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

64000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	600	-
Cl No.4.2(Construction)	-	150	-
Cl No.4.3(Whole Footwear)	-	250	-
4.3.1(Insole)	-	250	-
4.3.2(Toe spring height)	-	500	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1000	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1000	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1000	-
4.3.6(Energy Absorption at Seat Region)	-	1500	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	1000	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	1500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	1200	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	1000	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	1000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	1200	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1200	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	1000	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1500	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	1500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	1500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	1200	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	400	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	1500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	500	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	1200	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	1200	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	400	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1500	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	1200	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	1200	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	2000	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1200	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	1000	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	1000	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1200	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1200	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	1500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1500	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	30000	For Complete Chemical Testing
Cl No . 5(MARKING AND PACKING)	-	100	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1500	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4500	-
Clause 4.2 - 4.2.1(Construction)	-	250	-
Clause 4.2 - 4.2.2(Construction)	-	250	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	250	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	250	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1000	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1000	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1000	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	1000	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	1200	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	1200	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	1000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	1000	-
Clause 4.4, Table 2 iii)(Tear strength)	-	1000	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	1200	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.5, Table 3 i)(Tear strength)	-	1000	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1500	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	1200	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.6, Table 4 i)(Thickness)	-	400	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	1200	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	1200	-
Clause 4.7, Table 5 i)(Thickness)	-	400	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1200	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	1200	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	1200	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1500	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1500	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2500	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	1200	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	1500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	250	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	500	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1000	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1500	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	2000	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	800	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	1000	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	1500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	1000	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	1000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	1000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1200	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	1000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	1500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	1500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1500	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1200	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1200	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	1200	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1200	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1500	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	1000	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	1000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1500	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	2000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	3000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	3000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	3000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	3000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	3000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	3000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	3000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	3000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	3000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	3000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	3000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	3000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	3000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	3000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	3000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	3000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	3000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	3000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	3000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	3000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	3000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	3000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	3000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	3000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	3000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	3000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	3000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	3000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	3000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	3000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	3000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	3000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	3000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	3000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	3000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	3000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	3000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	3000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	3000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	3000	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	1500	-

23 Feb, 2029

-
-

IS 17636 (2021)

Bunk Beds - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(DESIGN AND WORKMANSHIP)	-	1000	-
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	5000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	1000	-
CLAUSE 7.6(Strength of Frame and Fastenings)	-	1000	-
CLAUSE 7.7(Stability Test)	-	1000	-
CLAUSE 7.8(Fastening of Upper Bed to Lower Bed)	-	2000	-
Cl-5(Dimensions)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)(Resistance to dry heat)	-	1000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(general test conditions)	-	1000	-
Cl-7.2.1(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.2(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.3(Top Bed Safety Barriers)	-	1000	-
Cl-7.2.4(Top Bed Safety Barriers)	-	1000	-
Cl-7.3.1(Gaps)	-	1000	-
Cl-7.3.2(Gaps)	-	1000	-
Cl-7.4.1(Bed Base)	-	1000	-
Cl-7.4.2(Bed Base)	-	1000	-
Cl-7.5.1(Attachment, Deflection and Strength of Ladder and Treads)	-	0	-
Cl-7.5.2(Dimensions of Treads)	-	1000	-
Cl-7.6(Strength of Frame and Fastenings)	-	1000	-
Cl-7.7(Stability)	-	1000	-
Cl-7.8(Fastening of Upper Bed to Lower Bed)	-	1000	-
Cl-10(Marking)	-	1000	-

23 Feb, 2029

-
Included w.e.f. 10.02.2026

IS 17635 (2022)

Beds - Specification

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
CLAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	5000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7(SAFETY TESTS)	-	1000	-
CLAUSE 7.3(Stability Test)	-	1000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	1000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	1000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	1000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	5000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	7500	-
CLAUSE 7.7(Vertical Impact Test)	-	1000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	3000	-
CLAUSE 8.2(Extendable Storage Elements)	-	2000	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)(Resistance to dry heat)	-	1000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(Safety Tests)	-	0	-
Cl-7.2(Safety Tests)	-	0	-
Cl-7.3(Stability Test)	-	0	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	0	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	0	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	1000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	1000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	2000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	2000	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	2000	-
Cl-7.7(Vertical Impact Test)	-	1000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	1000	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	2000	-
Cl-10(Marking)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-

23 Feb, 2029

-
Included w.e.f. 10.02.2026

IS 17634 (2022)

Storage Units - Specification

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	5000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7.1(SAFETY TESTS (General))	-	1000	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	1000	-
CLAUSE 7.2.1(Shelves)	-	1000	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	1000	-
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	1000	-
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	1000	-
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	1000	-
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	1000	-
CLAUSE 7.2.4.2(Drop test)	-	1000	-
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	1000	-
CLAUSE 7.3.1(Pivoted Doors)	-	1000	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	1000	-
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	1000	-
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	1000	-
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	1000	-
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	1000	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	1000	-
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	9500	-
CLAUSE 7.3.3(Flaps)	-	1000	-
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	1000	-
CLAUSE 7.3.3.2(Durability of flaps)	-	4500	-
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	1000	-
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	1000	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	1000	-
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	4500	-
CLAUSE 7.3.5(Extension Element)	-	1000	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	1000	-
CLAUSE 7.3.5.3(Durability of extension elements)	-	14000	-
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	1000	-
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	1000	-
CLAUSE 7.3.5.6(Interlock test)	-	1000	-
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	1000	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	1000	-
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	1000	-
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	4000	-
CLAUSE 7.3.7(Pull Force Test)	-	1000	-
CLAUSE 7.3.7(Pull Force Test)	-	1000	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	1000	-
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	4500	-
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	1000	-
CLAUSE 7.4.1.3(Sustained load test (overload))	-	1000	-
CLAUSE 7.4.1.4(Dislodgement test)	-	1000	-
CLAUSE 7.5(Stability Tests)	-	1000	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	1000	-
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	1000	-
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	1000	-
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	1000	-
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	1000	-
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	1000	-
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1000	-
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.1(General)	-	500	-
Cl-7.2.1(Shelves)	-	1000	-
Cl-7.2.2(Tops and Bottoms)	-	1000	-
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	1000	-
Cl-7.2.4(Strength of the Structure)	-	1000	-
Cl-7.3.1(Pivoted Doors)	-	1000	-
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	1000	-
Cl-7.3.3(Flaps)	-	1000	-
Cl-7.3.4(Vertical Roll-Fronts)	-	1000	-
Cl-7.3.5(Extension Elements)	-	1000	-
Cl-7.3.6(Locking and Latching Mechanism Test)	-	1000	-
Cl-7.3.7(Pull Force Test)	-	1000	-
Cl-7.3.8(Top Load Ease Cycle Test)	-	1000	-
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	1000	-
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	1000	-
Cl-7.4.1(Units Not Supported by the Floor)	-	1000	-
Cl-7.4.2(Units Supported by the Floor)	-	1000	-
Cl-7.5.1(General)	-	1000	-
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	1000	-
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	1000	-
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	1000	-
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	1000	-
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	1000	-
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	1000	-
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	1000	-
Cl-7.5.9(Strength Test for Wall Attachments)	-	1000	-
Cl-9(Marking)	-	1000	-

23 Feb, 2029

-
Included w.e.f.10.02.2026

IS 17633 (2022)

Tables and Desks - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
ClAUSE 5(Dimensions)	-	500	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	7000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	1000	-
CLAUSE 7.3.1.1(Stated load)	-	1000	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	1000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	1000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	5500	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	2500	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	5000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	3000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	1000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	1000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	1000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	1000	-
CLAUSE 7.7(Deflection of Table Tops)	-	1500	-
CLAUSE 7.8(Durability of Tables with Castors)	-	1500	-
CLAUSE 7.9(Drop Test)	-	1500	-
Cl - 5(Dimensions)	-	500	-
Cl-6 (a)(Resistance to mechanical damage)	-	2000	-
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	1000	-
Cl-6 (d)(Resistance to dry heat)	-	1000	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6 (g)(Adhesive performance)	-	1500	-
Cl-7.2.1(Stability Under Vertical Load)	-	1000	-
Cl-7.2.2(Stability with Extension Elements Open)	-	1000	-
Cl-7.2.3(Stability Under Horizontal Load)	-	1000	-
Cl-7.3.1(Strength under Vertical Static Force)	-	1000	-
Cl-7.3.2(Strength under horizontal static force)	-	1000	-
Cl-7.4.1(Durability under Vertical Force)	-	5000	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	5000	-
Cl-7.5.1(General)	-	500	-
Cl-7.5.2(Durability under Horizontal Force)	-	5000	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	1000	-
Cl-7.6.1(General)	-	500	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
Cl-7.7(Deflection of Table Tops)	-	1000	-
Cl-7.8(Durability of Tables with Castors)	-	2500	-
Cl-7.9(Drop Test)	-	500	-
Cl-9(Marking)	-	1000	-
7.1(General test conditions)	-	500	-

23 Feb, 2029

-
Included w.e.f. 10.02.2026

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

77000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	1500	-
CLAUSE 6(SURFACE PERFORMANCE)	-	6500	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	20000	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1000	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	1000	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	1000	-
CLAUSE 7.3.1.1(Seat static load test)	-	1800	-
CLAUSE 7.3.1.2(Back static load test)	-	1800	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	1800	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	1800	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	1800	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	1800	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	1800	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	1800	-
CLAUSE 7.3.2.1(Seat impact test)	-	1800	-
CLAUSE 7.3.2.2(Back impact test)	-	1800	-
CLAUSE 7.3.2.3(Arm impact test)	-	1800	-
CLAUSE 7.3.2.4(Drop test)	-	1800	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	19000	-
CLAUSE 7.4.2(Back Fatigue Test)	-	19000	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	19000	-
Cl - 5(DIMENSIONS)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	1500	-
Cl-6.1 (d)(Resistance to dry heat)	-	1500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	1000	-
Cl-6.1 (g)(Adhesive performance)	-	1500	-
Cl-6.2 (a) 1(Breaking load)	-	1000	-
Cl-6.2 (a) 2(Elongation at break)	-	1000	-
Cl-6.2 (a) 3(Tear strength)	-	1000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	1000	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	1000	-
Cl-6.2 (a) 10(Seam slippage)	-	1000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	1000	-
Cl-6.2 (a) 14(Resistance to cold)	-	1000	-
Cl-6.2 (b) 1(Tear strength)	-	1000	-
Cl-6.2 (b) 2(Flexing endurance)	-	1000	-
Cl-6.2 (b) 3(Finish adhesion)	-	1000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1500	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	1000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	1000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	1000	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	1500	-
Cl-7.2.2(Rearwards Overbalancing)	-	1500	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	1500	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	500	-
Cl-7.3.1(Static Load Test)	-	2000	-
Cl-7.3.2(Impact Test)	-	2000	-
Cl-7.4.1(Seat Fatigue Test)	-	2000	-
Cl-7.4.2(Back Fatigue Test)	-	2000	-
Cl-7.4.3(Arm Rest Durability)	-	15000	-
Cl-9(Marking)	-	1000	-
7.1(General test conditions)	-	0	-

23 Feb, 2029

-
Included w.e.f. 10.02.2026

IS 17631 (2022)

Work Chairs - Specification

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	1000	-
clause 5(DIMENSIONS)	-	1000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	5000	-
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	5000	-
Cl-7.3.1(Front Edge Overturning)	-	2000	-
Cl-7.3.2(Forwards Overturning)	-	2000	-
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	2000	-
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	2000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat;)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat;)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	2000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	-
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	1000	-
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	1000	-
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1000	-
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	1000	-
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	1000	-
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	-
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1000	-
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	-
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	-
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	-
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	-
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	-
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1500	-
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1500	-
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	-
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1500	-
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1500	-
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1500	-
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1500	-
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1500	-
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	-
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	-
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	-
Cl-7.4.1(Seat Front Edge Static Load Test)	-	1500	-
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	1500	-
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	1500	-
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	1500	-
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	-
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	-
Cl-7.5.1(Seat and Back Durability)	-	20000	-
Cl-7.5.2(Arm Rest Durability)	-	15000	-
Cl-7.5.3(Swivel Test)	-	15000	-
Cl-7.5.4(Foot-rest Durability)	-	15000	-
Cl-7.5.5(Castor and Chair-Base Durability)	-	15000	-

23 Feb, 2029

-
Included w.e.f. 10.02.2026

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

139000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1000	-
Cl-4.2(Energy source classifications)	-	1000	-
Cl-4.3(Protection against energy sources)	-	1000	-
Cl-4.4(Safeguards)	-	1000	-
Cl-4.5(Explosion)	-	1000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	1000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	-
Cl-4.10(Components requirements)	-	1000	-
Cl-5.1(General- Electrically-caused injury)	-	1000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	-
Cl-5.3(Protection against electrical energy sources)	-	1000	-
Cl-5.4(Insulation materials and requirements)	-	1000	-
Cl-5.5(Components as safeguards)	-	1000	-
Cl-5.6(Protective conductor)	-	1000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	1000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	-
Cl-6.5(Internal and external wiring)	-	1000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	1000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	-
Cl-7.3(Ozone exposure)	-	1000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	1000	-
Cl-8.1(General- Mechanically-caused injury)	-	1000	-
Cl-8.2(Mechanical energy source classifications)	-	1000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	-
Cl-8.5(Safeguards against moving parts)	-	1000	-
Cl-8.6(Stability of equipment)	-	2000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2000	-
Cl-8.8(Handle strength)	-	2000	-
Cl-8.9(Wheels or casters attachment requirements)	-	2000	-
Cl-8.10(Carts, stands, and similar carriers)	-	2000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	-
Cl-9.1(General-Thermal burn injury)	-	2000	-
Cl-9.2(Thermal energy source classifications)	-	2000	-
Cl-9.3(Touch temperature limits)	-	2000	-
Cl-9.4(Safeguards against thermal energy sources)	-	2000	-
Cl-9.5(Requirements for safeguards)	-	2000	-
Cl-9.6(Requirements for wireless power transmitters)	-	2000	-
Annex A(Examples of equipment within the scope of this document)	-	1000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	-
Annex B-2(Normal operating conditions)	-	1000	-
Annex B-3(Simulated abnormal operating conditions)	-	1000	-
Annex B-4(Simulated single fault conditions)	-	1000	-
Annex D-1(Impulse test generators)	-	1000	-
Annex E-1(Electrical energy source classification for audio signals)	-	1000	-
Annex E-2(Audio signals used during test)	-	1000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	-
Annex F-2(Letter symbols and graphical symbols)	-	1000	-
Annex F-3(Equipment markings)	-	1000	-
Annex F-4(Instructions)	-	1000	-
Annex F-5(Instructional safeguards)	-	1000	-
Annex G-1(Switches)	-	1000	-
Annex G-2(Relays)	-	1000	-
Annex G-3(Protective devices)	-	1000	-
Annex G-4(Connectors)	-	1000	-
Annex G-5(Wound components)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex G-7(Mains power supply cords and interconnection cables)	-	0	-
Annex G-8(Varistors)	-	0	-
Annex G-9(Integrated circuit (IC) current limiters)	-	0	-
Annex G-10(Resistors)	-	0	-
Annex G-11(Capacitors and RC units)	-	0	-
Annex G-13(Printed boards)	-	1000	-
Annex G-14(Coatings on component terminals)	-	1000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	1000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	-
Annex H-2(Method A)	-	1000	-
Annex H-3(Method B)	-	1000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex J-3(Testing during manufacturing)	-	0	-
Annex K-1(General- Safety interlocks)	-	1000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	1000	-
Annex K-3(Inadvertent change of operating mode)	-	1000	-
Annex K-4(Interlock safeguard override)	-	1000	-
Annex K-5(Fail-safe)	-	1000	-
Annex K-6(Mechanically operated safety interlocks)	-	1000	-
Annex K-7(Interlock circuit isolation)	-	1000	-
Annex L-1(General requirements)	-	1000	-
Annex L-2(Permanently connected equipment)	-	1000	-
Annex L-3()	-	1000	-
Annex L-4(Single-phase equipment)	-	1000	-
Annex L-5(Three-phase equipment)	-	1000	-
Annex L-6(Switches as disconnect devices)	-	1000	-
Annex L-7(Plugs as disconnect devices)	-	1000	-
Annex L-8(Multiple power sources)	-	1000	-
Annex L-9(Compliance criteria)	-	1000	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	1000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	-
Annex M-6(Safeguards against short-circuits)	-	1000	-
Annex M-9(Preventing electrolyte spillage)	-	1000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1000	-
Annex N(Electrochemical potentials (V))	-	1000	-
Annex O(Measurement of creepage distances and clearances)	-	500	-
Annex P-1(General-Safeguards against conductive objects)	-	1000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	-
Annex Q-1(Limited power source)	-	1000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	1000	-
Annex S-4(Flammability classification of materials)	-	1000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	1000	-
Annex T-1(General-Mechanical strength tests)	-	1000	-
Annex T-2(Steady force test, 10 N)	-	1000	-
Annex T-3(Steady force test, 30 N)	-	1000	-
Annex T-4(Steady force test, 100 N)	-	1000	-
Annex T-5(Steady force test, 250 N)	-	1000	-
Annex T-6(Enclosure impact test)	-	1000	-
Annex T-7(Drop test)	-	1000	-
Annex T-8(Stress relief test)	-	1000	-
Annex T-9(Glass impact test)	-	1000	-
Annex T-10(Glass fragmentation test)	-	1000	-
Annex T-11(Test for telescoping or rod antennas)	-	1000	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	0	-
Annex V-1(Accessible parts of equipment)	-	1000	-
Annex V-2(Accessible part criterion)	-	1000	-
Annex W(Comparison of terms introduced in this document)	-	1000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000	-
Annex Y-4(Gaskets)	-	1000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000	-
Annex Y-6(Mechanical strength of enclosures)	-	1000	-
Annex G-12(Optocouplers)	-	0	-

23 Feb, 2029

-
"1 Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex U (""Mechanical strength of CRTs and protection against the effects ofimplosion"") Instrument not available. 2 Cl-10.2 (Radiation energy source classifications) (Radiation energy source classifications) Instrument not available. 3 Cl-10.3 (Safeguards against laser radiation) Safeguards against laser radiation Instrument not available. 4 Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Safeguards against optical radiation from lamps and lamp systems(including LED types) Instrument not available. 5 Cl-10.5 (Safeguards against X-radiation) Safeguards against X-radiation Instrument not available. 6 Cl-10.6 (Safeguards against acoustic energy sources) Safeguards against acoustic energy sources Instrument not available. 7 Annex C-1 (Protection of materials in equipment from UV radiation) Protection of materials in equipment from UV radiation Instrument not available. 8 Annex C-2 (UV light conditioning test) UV light conditioning test Instrument not available. 9 Annex D-2 (Antenna interface test generator) Antenna interface test generator Instrument not available. 10 Annex D-3 (Electronic pulse generator) Electronic pulse generator Instrument not available. 11 Annex R (Limited short-circuit test) Limited short-circuit test Instrument not available. 12 Annex Y-2 (Resistance to UV radiation) Resistance to UV radiation Instrument not available. 13 Cl-10.1 (General-Radiation) General-Radiation Instrument not available. 14 Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Risk of explosion from lead acid and NiCd batteries Instrument not available. 15 Annex M-8 (""Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte"") Protection against internal ignition from external spark sources ofrechargeable batteries with aqueous electrolyte"") Instrument not available. 16 Annex Y-3 (Resistance to corrosion) Resistance to corrosion Instrument not available."

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

295000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	8500	-
Clause 4.3(Specifications)	-	4500	-
Clause 4.5(Safety Requirements)	-	122000	-
Clause 4.6(Electromagnetic Compatibility (EMC) Requirements)	-	0	(In Exclusion)
Clause 5(Marking)	-	1500	-
Clause 6(Operating Life Test)	-	18500	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	2500	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	4500	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	4500	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	4500	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	4500	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	4500	-
Clause 4.1, Table-1, i) g)(Teletext)	-	1500	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	1500	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	4500	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	4500	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	4500	-
Clause 4.1, Table-1, i) n)(Data services)	-	4500	-
Clause 4.1, Table-1, i) p)(OSD)	-	4500	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	4500	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	4500	-
Clause 4.1, Table-1, i) s)(Time)	-	500	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	1500	-
Clause 4.4, Table-2, i) b)(Frequency)	-	500	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	500	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	4500	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	1500	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	1500	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	4500	-
Clause 4.1, Table-1, ii) d)(Services available)	-	1500	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	1500	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	1500	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	1000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	2000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	4500	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	2000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	3000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	4500	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	2000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	1500	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	4500	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	4500	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	4500	-
Clause 4.4, Table-2, v)(Symbol rate)	-	4500	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	4500	-
Clause 4.4, Table-2, vii)(DisEqC)	-	1500	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	500	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	500	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	500	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	500	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	500	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	500	-
Clause 3.1, Table-1, v) c)(Support package)	-	500	-
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	-	-
Clause 4.3(Specifications)	-	-	-
Clause 4.5(Safety Requirements)	-	-	-
Clause 5(Marking)	-	-	-
Clause 6(Operating Life Test)	-	-	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	-	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	-	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	-	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	-	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	-	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	-	-
Clause 4.1, Table-1, i) g)(Teletext)	-	-	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	-	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	-	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	-	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	-	-
Clause 4.1, Table-1, i) n)(Data services)	-	-	-
Clause 4.1, Table-1, i) p)(OSD)	-	-	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	-	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	-	-
Clause 4.1, Table-1, i) s)(Time)	-	-	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	-	-
Clause 4.4, Table-2, i) b)(Frequency)	-	-	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	-	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	-	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	-	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	-	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	-	-
Clause 4.1, Table-1, ii) d)(Services available)	-	-	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	-	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	-	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	-	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	-	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	-	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	-	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	-	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	-	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	-	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	-	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	-	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	-	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	-	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	-	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	-	-
Clause 4.4, Table-2, v)(Symbol rate)	-	-	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	-	-
Clause 4.4, Table-2, vii)(DisEqC)	-	-	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	-	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	-	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	-	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	-	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	-	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	-	-
Clause 3.1, Table-1, v) c)(Support package)	-	-	-

23 Feb, 2029

-
Included w.e.f 31.12.2025 Clause 4.6 (Electromagnetic Compatibility (EMC) Requirements)

IS/ISO 834 : Part 8 (2002)

Fire-Resistance Tests - Elements of Building Construction Part 8 Specific Requirements for Non-load Bearing Vertical Separating Elements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	350000		-

23 Feb, 2029

-
Included w.e.f. 06.11.2025

IS/ISO 834 : Part 1 (1999)

Fire-Resistance Tests Elements of Building Construction Part 1 General Requirements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	350000		-

23 Feb, 2029

-
Included w.e.f. 06.11.2025

IS 17518 : Part 1 (2022)

Fire resistance tests Door and shutter assemblies Part 1: General requirements Adoption of ISO 3008-1:2019

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation)	-	350000		-

23 Feb, 2029

-
Included w.e.f. 06.11.2025

IS 16947 (2018)

Fire resistance tests for doors with glass panes, openable glass windows and sliding glass doors

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9(Integrity, Insulation, Radiation)	-	450000		-

23 Feb, 2029

-
Included w.e.f. 06.11.2025

IS 16945 (2018)

Fire resistance test for glass walls

425000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation, Radiation)	-	425000		-

23 Feb, 2029

-
Included w.e.f. 06.11.2025

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	1500	-
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	1500	-
Cl-6.2(Design)	-	150	-
Cl-6.3(Size and Fitting)	-	200	-
Cl-6.4(Height of Upper)	-	200	-
Cl-6.5.1(Whole Footwear-Construction)	-	200	-
Cl-6.5.2(Whole Footwear-Ergonomic Feature)	-	500	-
Cl-6.5.3(Whole Footwear-Upper – Outsole Bond Strength)	-	800	-
Cl-6.5.4(Whole Footwear- Slip Resistance)	-	1500	-
Cl-6.5.5(Whole Footwear- Resistance to Fuel Oil)	-	2000	-
Cl-6.5.6(Whole Footwear- Impact Resistance)	-	1200	-
Cl-6.5.7(Whole Footwear- Compression Resistance)	-	1200	-
Cl-6.5.8(Whole Footwear- Resistance to Corrosion)	-	2000	-
Cl-6.6.2(Upper- Material)	-	200	-
Cl-6.6.3(Upper-Tear Strength)	-	800	-
Cl-6.6.4(Upper- Tensile strength)	-	800	-
Cl-6.6.5(Upper- Water Vapour Permeability and Coefficient)	-	1000	-
Cl-6.7.1(Vamp and quarter lining-Material)	-	200	-
Cl-6.7.2(Vamp and quarter lining-Tear strength)	-	800	-
Cl-6.7.3(Vamp and quarter lining-Abrasion resistance)	-	1200	-
Cl-6.7.4(Vamp and quarter lining-Water vapour permeability and coefficient)	-	1000	-
Cl-6.8(Toecaps -Whole toecap)	-	3000	-
Cl-6.9.1(Insole- Material)	-	200	-
Cl-6.9.2(Insole-Thickness)	-	200	-
Cl-6.9.3(Insole- Abrasion resistance)	-	600	-
Cl-6.9.4(Insole- Water absorption and desorption)	-	1000	-
Cl-6.10(Insocks-Thickness)	-	200	-
Cl-6.10.1(Insocks-Material)	-	200	-
Cl-6.10.2(Insocks-Abrasion resistance)	-	1200	-
Cl-6.10.3(Insocks-Water absorption and desorption)	-	1000	-
Cl-6.11(Stiffener)	-	3000	-
Cl-6.12(Tongue -Material)	-	800	-
Cl-6.13(Closing thread-- Properties)	-	1000	-
Cl-6.14.1(Outsole-Material)	-	200	-
Cl-6.14.2, 6.14.3 & 6.14.4(Outsole-Thickness, cleat area and cleat height)	-	200	-
Cl-6.14.5(Outsole-Tear strength)	-	800	-
Cl-6.14.6(Outsole-Abrasion resistance)	-	1000	-
Cl-6.14.7(Outsole-Flexing resistance)	-	1000	-
Cl-6.14.8(Outsole-Interlayer bond strength)	-	800	-
Cl-6.15.1(Laces-Material)	-	200	-
Cl-6.15.2(Laces-Colour Fastness)	-	1000	-
Cl-6.15.3(Laces-Abrasion Resistance)	-	800	-
Cl-6.15.4(Laces-Breaking load)	-	800	-
Cl-7.1, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	Chemical package charges- 25000
Cl-7.2(PVC outsole)	-	3000	-
Cl-8.3(Cold insulation of Sole)	-	1000	-
Cl-8.4(Heat insulation of Sole)	-	1000	-
Cl-10(Marking)	-	200	-
cL-7.1, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.1 Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (x)(pH)	-	800	-
Cl-7.1, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-

23 Feb, 2029

-
Included w.e.f. 18.08.2025

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	100	-
5.3(Height)	-	200	-
5.4.2(Ergonomic feature)	-	500	-
5.4.3(Sole bond)	-	800	-
5.4.4(Slip resistance)	-	1500	-
5.4.5(Leak proofness)	-	800	-
5.4.6.1(Toe caps General)	-	200	-
5.4.6.2(Internal length of toecaps)	-	200	-
5.4.6.3(Corrosion resistance)	-	1000	-
5.4.6.4(Impact resistance)	-	1000	-
5.4.6.5(Compression resistance)	-	1000	-
5.4.7(Colour)	-	150	-
5.5.1(Upper material)	-	200	-
5.5.1(Upper Thickness)	-	200	-
5.5.2(Upper tensile strength)	-	800	-
5.5.3(Upper flexing)	-	1200	-
5.5.4(Upper Hardness)	-	500	-
5.6.1(Lining material)	-	200	-
5.6.2(Lining Tear strength)	-	800	-
5.6.3(Lining abrasion)	-	1200	-
5.6.4(Lining adhesion with upper)	-	800	-
5.7.1(Insole material)	-	200	-
5.7.1(Insole thickness)	-	200	-
5.7.2(Insole abrasion)	-	600	-
5.7.3(Water absorption and desorption)	-	1000	-
5.8.2(Eyelets material)	-	200	-
5.8.2(Lace material)	-	200	-
5.8.2(Lace length)	-	200	-
5.8.2(Lace breaking load)	-	800	-
5.9.1(Insock material)	-	200	-
5.9.2(Inscok abrasion resistance)	-	1200	-
5.9.3(Insock water absorption and desorption)	-	1000	-
5.8.2(Closing thread breaking load)	-	800	-
5.11.1(Outsole material)	-	200	-
5.11.1(Outsole thickness)	-	200	-
5.11.2(Outsole density)	-	800	-
5.11.3(Outsole Interlayer bond)	-	800	-
5.11.4(Outsole tear)	-	800	-
5.11.5(Outsole Abrasion)	-	1200	-
5.11.6(Outsole hardness)	-	500	-
5.11.7(Outsole flexing)	-	1200	-
5.4.8.1(Conductive Footwear)	-	1500	-
5.4.8.2(Antistatic Footwear)	-	1500	-
5.4.8.3.2(Penetration resistance)	-	800	-
5.4.8.4(Cut resistance)	-	800	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	2000	-
5.4.8.6(Outsole resistance to fuel oil)	-	1000	-
5.11.8(Outsole cold flex resistance)	-	2000	-
6.1(Volatility)	-	600	-
6.2(Lead content)	-	600	-
Table 1 as per IS 17011 2018(pH)	-	600	Chemical package charges 30000/-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	3000	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	3000	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	3000	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	3000	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	3000	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	3000	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
5.10(Closing Thread (If used))	-	800	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	800	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	800	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.1(Insole thickness)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.8.2(Closing thread breaking load)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
Table 1 as per IS 17011 2018(pH)	-	0	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	0	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	0	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	0	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	0	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	0	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	0	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	0	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	0	-
5.10(Closing Thread (If used))	-	0	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	0	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	0	-

23 Feb, 2029

-
Included w.e.f. 12.11.2025 5.5.5 (Upper Cold flex resistance)

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

39500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	25000	For chemical test: 25000
4.16.2(Breaking Strength of lace )	-	800	-
4.16.1(Length of lace )	-	250	-
4.15(D-ring & Hooks )	-	250	-
6.1(Resistance to Fuel Oil)	-	1500	-
4.14.9(Resistance to hot contact )	-	800	-
4.14.8(Flexing resistance )	-	1200	-
4.14.7(Ageing test)	-	1500	-
4.14.6(Hardness (IRHD))	-	600	-
4.14.5(Abrasion resistance )	-	800	-
4.14.4(Tear Strength)	-	800	-
4.14.3(Sole Density )	-	600	-
4.14.2(Thickness)	-	250	-
4.14.1(Material)	-	150	-
4.13(Breaking Strength of thread )	-	800	-
4.12.2(Tear Strength)	-	800	-
4.12.1(Thickness )	-	150	-
4.11.2(Tear Strength)	-	800	-
4.11.1(Thickness )	-	150	-
4.10.3(Water absorption & desorption percent)	-	1000	-
4.10.2(Abrasion resistance )	-	1200	-
4.10.1(Material)	-	250	-
4.9.3(Water absorption & desorption percent)	-	1000	-
4.9.2(Abrasion resistance )	-	1200	-
4.9.1(Thickness)	-	250	-
4.8(Thickness Toe puff & counter stiffener)	-	250	-
4.7.5(Water Vapour permeability & coefficient )	-	1200	-
4.7.4(Abrasion resistance )	-	1200	-
4.7.3(Tear Strength)	-	800	-
4.7.2(Material Counter & Tongue)	-	1200	-
4.7.1(Material vamp & Quarter)	-	500	-
4.6.3(Water Penetration and water absorption )	-	1000	-
4.6.2(Tear Strength)	-	800	-
4.6.1(Thickness )	-	250	-
4.5.8(Energy absorption of seat region )	-	800	-
4.5.7(Cold Insulation of sole complex)	-	1200	-
4.5.6(Heat Insulation of sole Complex)	-	1200	-
4.5.5(Antistatic test)	-	1500	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	800	-
4.5.3.1(Upper/outsole bond strength)	-	800	-
4.5.2(Ergonomic Feature)	-	500	-
4.5.1(Construction)	-	100	-
4.4(Height of upper )	-	150	-
4.3.2(Weight)	-	150	-
4.3.1(Size)	-	100	-
4.2(Design )	-	100	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	2500	-
8, 8.1, 8.2, 8.2.1(Marking)	-	100	-
9(Information to be Supplied)	-	100	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	1200	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	2500	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	100	-
Cl.9,(Information to be Supplied)	-	100	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	0	-
8, 8.1, 8.2, 8.2.1(Marking)	-	0	-
9(Information to be Supplied)	-	0	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	0	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	0	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	0	-
Cl.9,(Information to be Supplied)	-	0	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	-	-
8, 8.1, 8.2, 8.2.1(Marking)	-	-	-
9(Information to be Supplied)	-	-	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	-	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	-	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	-	-
Cl.9,(Information to be Supplied)	-	-	-

23 Feb, 2029

-
Included w.e.f 04.11.2025

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

34800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	150	-
Cl. No.5("SIZE AND FITTINGS ")	-	100	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	150	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	800	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	800	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	800	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1200	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1200	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	800	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1200	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1200	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	800	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	1000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	800	-
Cl. No.8.4,Table no. 5(i)(Density)	-	1000	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1200	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	800	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	800	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	800	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	800	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	800	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	800	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	800	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2000	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	800	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	800	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	25000	-
Cl. No.9.(MARKING AND PACKING)	-	1500	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3000	-
Cl. No.8.6.2(Lead content)	-	800	-
Cl-5 ((Amendment No-1)(Category And Type)	-	150	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	800	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	800	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	800	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2000	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	800	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	800	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1200	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1200	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	25000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	800	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	800	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	800	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1200	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	800	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1000	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	800	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1000	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	800	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	1000	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1000	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	1000	-
Cl-10 (Amendment No-1)(Marking)	-	150	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	3000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	3000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	3000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	3000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	3000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	3000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	3000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	3000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	3000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	3000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	3000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	3000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	3000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	3000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	3000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	3000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	3000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	3000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	3000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	3000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	3000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	3000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	3000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	3000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	3000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	3000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	3000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	3000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	3000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	3000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	3000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	3000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	3000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	3000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	3000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	3000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	3000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	3000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	3000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	3000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	3000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	3000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	3000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	3000	-
Cl. No.4(SHAPE AND DESIGN)	-	0	-
Cl. No.5("SIZE AND FITTINGS ")	-	0	-
Cl. No.6("CONSTRUCTION ")	-	0	-
Cl. No.7(MATERIAL)	-	0	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	0	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	0	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	0	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	0	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	0	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	0	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	0	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	0	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	0	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	0	-
Cl. No.8.4,Table no. 5(i)(Density)	-	0	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	0	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	0	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	0	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	0	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	0	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	0	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	0	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	0	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	0	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	0	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	0	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	0	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	0	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	0	-
Cl. No.9.(MARKING AND PACKING)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl. No.8.6.2(Lead content)	-	0	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	0	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	0	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	0	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	0	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	0	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	0	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	0	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	0	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	0	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	0	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	0	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	0	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	0	-
Cl-10 (Amendment No-1)(Marking)	-	0	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	0	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	0	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	0	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	0	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	0	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	0	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	0	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	0	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	0	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	0	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	0	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	0	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	0	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	0	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	0	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	0	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	0	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	0	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	0	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	0	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	0	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	0	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	0	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	0	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	0	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	0	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	0	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	0	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	0	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	0	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	0	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	0	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	0	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	0	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	0	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	0	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	0	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	0	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	0	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	0	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	0	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	0	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	0	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	0	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	0	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	0	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	0	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	0	-

23 Feb, 2029

-
Included w.e.f. 18.08.2025

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

45400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Design)	-	150	-
Clause-5.3(Height of Upper)	-	150	-
Clause-5.4(Weight)	-	150	-
Clause-5.5.1(Construction)	-	150	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	800	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	800	-
Clause-5.5.4(Ergonomic Features)	-	500	-
Clause-5.5.5(Slip Resistance)	-	1500	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	800	-
Clause-5.5.7(Water Resistance)	-	1000	-
Clause-5.6.1(Penetration Resistance)	-	1000	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	1500	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	1200	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	1200	-
Clause-5.7.1(Material)	-	250	-
Clause-5.7.2(Tear Strength)	-	800	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	1500	-
Clause-5.7.4(Colour Fastness: Light)	-	0	-
Clause-5.7.4(Colour Fastness:Washing)	-	1000	-
Clause-5.8.2(Tear Strength)	-	800	-
Clause-5.8.3(Abrasion Resistance)	-	1200	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	1500	-
Clause-5.9.1(Tear Strength)	-	800	-
Clause-5.10.1(Binding Tape)	-	500	-
Clause-5.11.1(Closing Thread)	-	500	-
Clause-5.12.1(Material and Thickness)	-	150	-
Clause-5.12.2(Abrasion Resistance)	-	1200	-
Clause-5.12.3(Water Absorption and Desorption)	-	1500	-
Clause-5.13.1(Material and Thickness)	-	150	-
Clause-5.13.2(Abrasion Resistance)	-	1200	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	800	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	150	-
Clause-5.16.1(Material)	-	150	-
Clause-5.16.2(Thickness)	-	150	-
Clause-5.16.3(Sole Density)	-	600	-
Clause-5.16.4(Hardness)	-	600	-
Clause-5.16.5(Ageing)	-	1200	-
Clause-5.16.6(Tear Strength)	-	800	-
Clause-5.16.7(Abrasion Resistance)	-	1200	-
Clause-5.16.8(Flexing Resistance)	-	1200	-
Clause-5.16.9(Hydrolysis)	-	2000	-
Clause-5.16.10(Interlayer Bond Strength)	-	800	-
Clause-5.17(Eyelets)	-	800	-
Clause-5.18.1(Material)	-	100	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	0	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	800	-
Clause-5.18.4.1(Lace to lace)	-	800	-
Clause-5.18.4.2(Lace to eyelet)	-	800	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	Chemical Complete Package charge: 25000
Clause-7(Marking)	-	150	-
Cl-5.10.2(Colour fastness to light)	-	0	-
Cl-5.10.2(Colour fastness to washing)	-	1000	-
Cl-5.11.2(Colour fastness to washing)	-	1000	-
Cl-5.11.2(Colour fastness to light)	-	0	-
Cl-5.11.2(Colour fastness to perspiration)	-	1000	-
Cl 5.9(Outer Toe Cap (minimum thickness))	-	150	-
Cl- 6, Table No 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	3000	-
Cl-6, Table no-1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl-6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-6, Table no-1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-6, Table no 1 of IS 17011 (x)(pH)	-	3000	-
Cl-6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
Cl-5.7.5 (Amendment No-1)(Water Repellency)	-	800	-
Cl-5.7.5 (Amendment No-1)(Water Resistance)	-	1000	-
Cl-5.9.2 (Amendment No-1)(Abrasion Resistance Test)	-	1200	-
Clause-5.2(Size and Fitting)	-	150	-

23 Feb, 2029

-
Included w.e.f. 26.09.2025 Exclusion: Cl.5.7.4, Cl.5.11.2, Cl.5.10.2 (Colour fastness to light)

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

38400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	-
Cl 5.2.2(" Height of upper ")	-	250	-
Cl 5.2.3(Heel area)	-	250	-
Cl 5.3.1.1(Construction of whole footwear)	-	250	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	800	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	500	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1500	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
Cl 5.3.6(Seam strength)	-	800	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	250	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	-
Cl 5.4.7(Resistance to hydrolysis)	-	2000	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1200	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	-
Cl 5.6.2(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1200	-
Cl 5.8.2.1(Thickness of Outsole)	-	250	-
Cl 5.8.2.2(Cleated area)	-	250	-
Cl 5.8.2.3(Cleat height)	-	250	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2000	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	250	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	250	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	2000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	2000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	2000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	2000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1200	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	0	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	250	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	250	-
Cl 6.2.7.3(Resistance to cutting)	-	1200	-
Cl 6.2.8(Scuff cap)	-	1200	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1200	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	-
Cl 6.4.3.2(Design of Ladder grip)	-	250	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	250	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7("Marking ")	-	150	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	500	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	500	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	500	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	500	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	500	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	500	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	500	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	500	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	500	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	500	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	500	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	500	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	500	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	500	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	500	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	500	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	500	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	500	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	500	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	500	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	500	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	500	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	500	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	500	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	500	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	500	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	500	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	500	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	500	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	500	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	500	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	500	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	500	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	500	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	500	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	500	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	500	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	500	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2(Leak proofness)	-	-	-
Cl 5.3.3(Specific ergonomic features)	-	-	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.6(Seam strength)	-	-	-
Cl 5.3.7(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.5(Flexing resistance)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	-	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6(Ankle protection)	-	-	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	-	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.7.3(Resistance to cutting)	-	-	-
Cl 6.2.8(Scuff cap)	-	-	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7("Marking ")	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	-	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	-	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	-	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	-	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	-	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	-	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	-	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	-	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	-	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	-	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	-	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	-	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	-	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	-	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	-	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	-	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	-	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	-	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	-	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	-	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	-	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	-	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	-	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	-	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	-	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	-	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	-	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	-	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	-	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	-	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	-	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	-	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	-	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	-	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	-	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	-	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	-	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	-	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	-	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025 Exclusion: Cl 6.2.6 (Ankle protection)

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

39999 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	250	-
Cl 5.2.2(" Height of upper ")	-	500	-
Cl 5.2.3(Heel area)	-	500	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	500	-
Cl 5.3.2.2(Internal length)	-	500	-
Cl 5.3.2.3(Width of toecap flange)	-	500	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
Cl 5.3.7(Seam strength)	-	800	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	500	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	-
Cl 5.4.7(Resistance to hydrolysis)	-	1500	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	-
Cl 5.6.2(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	500	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	500	-
Cl 5.8.2.2(Cleated area)	-	500	-
Cl 5.8.2.3(Cleat height)	-	500	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1200	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1500	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1500	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	500	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	500	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1500	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1500	-
Cl 6.2.4(Energy absorption of seat region)	-	1500	-
Cl 6.2.5(Water resistance)	-	1500	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	500	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1200	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	500	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.8.3(Resistance to cutting)	-	1500	-
Cl 6.2.9(Scuff cap)	-	1500	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1500	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1500	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7("Marking ")	-	250	-
Cl 7("Marking ")	-	250	-
Cl 5.4.5(Flexing resistance)	-	1500	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CLASSIFICATION)	-	250	-
3.2(compact insole)	-	500	-
3.3(compact insole)	-	500	-
3.4(compact Outsole/heel)	-	500	-
3.5(Description lining material)	-	250	-
3.6(description occupatioanl footwear)	-	250	-
3.7(Ruber material)	-	250	-
4(Type & varity)	-	250	-
5(Design)	-	250	-
6(size & fitting)	-	250	-
7.1(lining material)	-	250	-
7.1.1(Tear strength)	-	800	-
7.1.2(Abrasion resistance)	-	1000	-
7.2(Coated bindind material)	-	1500	-
7.3(Thread for upper closing)	-	1500	-
7.3(Thread for upper closing - sulphur test)	-	1000	-
7.4(Use of rubber)	-	250	-
7.4.1(Physical requirement of rubber component)	-	1500	-
7.5(observation of Upper)	-	250	-
7.5.1(Tensile)	-	800	-
7.5.2(Thickness)	-	250	-
7.5.3(Flexing Resistance)	-	1000	-
7.6(Outsole/Heel)	-	250	-
7.6.1(Out sole thickness)	-	250	-
7.6.2(out sole tear strength)	-	800	-
7.6.3(out sole abrasion)	-	1000	-
7.6.4(out sole flexing)	-	1000	-
7.6.5(Interlayer bond strength)	-	800	-
7.7(INSOCK Visual)	-	250	-
7.7.1(Insock thickness)	-	500	-
7.7.2(Insock abrasion)	-	1000	-
8(CONSTRUCTION)	-	250	-
8.1(Hot contact)	-	1500	-
8.2(Leak proofness)	-	1500	-
8.3(Height of upper)	-	500	-
8.4(Adhesion test)	-	1000	-
8.5(Resistance to acid & alkaline)	-	1500	-
8.6(Resistance to fule oil)	-	1500	-
8.7.1(Antistatic)	-	1500	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	1500	-
8.7.3(Elecrically nsulating footwear)	-	0	-
8.7.4(Resistance to cold)	-	1500	-
10(Finish of boots)	-	250	-
11.1(Marking)	-	250	-
11.2(Marking)	-	250	-
11.3(Marking)	-	250	-
9(IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
cl 9(IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
9(IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	3000	-
9(IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	3000	-
9(IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
9(IS - 17011,Table - 1(vii)(Formaldehyde)	-	3000	-
9(IS - 17011,Table - 1(viii)(Organotin compounds)	-	3000	-
9(IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
9(IS - 17011,Table - 1(x)(pH)	-	1000	-
9(IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	3000	-
9(IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	3000	-
3.1(CLASSIFICATION)	-	-	-
3.2(compact insole)	-	-	-
3.3(compact insole)	-	-	-
3.4(compact Outsole/heel)	-	-	-
3.5(Description lining material)	-	-	-
3.6(description occupatioanl footwear)	-	-	-
3.7(Ruber material)	-	-	-
4(Type & varity)	-	-	-
5(Design)	-	-	-
6(size & fitting)	-	-	-
7.1(lining material)	-	-	-
7.1.1(Tear strength)	-	-	-
7.1.2(Abrasion resistance)	-	-	-
7.2(Coated bindind material)	-	-	-
7.3(Thread for upper closing)	-	-	-
7.3(Thread for upper closing - sulphur test)	-	-	-
7.4(Use of rubber)	-	-	-
7.4.1(Physical requirement of rubber component)	-	-	-
7.5(observation of Upper)	-	-	-
7.5.1(Tensile)	-	-	-
7.5.2(Thickness)	-	-	-
7.5.3(Flexing Resistance)	-	-	-
7.6(Outsole/Heel)	-	-	-
7.6.1(Out sole thickness)	-	-	-
7.6.2(out sole tear strength)	-	-	-
7.6.3(out sole abrasion)	-	-	-
7.6.4(out sole flexing)	-	-	-
7.6.5(Interlayer bond strength)	-	-	-
7.7(INSOCK Visual)	-	-	-
7.7.1(Insock thickness)	-	-	-
7.7.2(Insock abrasion)	-	-	-
8(CONSTRUCTION)	-	-	-
8.1(Hot contact)	-	-	-
8.2(Leak proofness)	-	-	-
8.3(Height of upper)	-	-	-
8.4(Adhesion test)	-	-	-
8.5(Resistance to acid & alkaline)	-	-	-
8.6(Resistance to fule oil)	-	-	-
8.7.1(Antistatic)	-	-	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	-	-
8.7.3(Elecrically nsulating footwear)	-	-	-
8.7.4(Resistance to cold)	-	-	-
10(Finish of boots)	-	-	-
11.1(Marking)	-	-	-
11.2(Marking)	-	-	-
11.3(Marking)	-	-	-
9(IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
cl 9(IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
9(IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	-	-
9(IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	-	-
9(IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
9(IS - 17011,Table - 1(vii)(Formaldehyde)	-	-	-
9(IS - 17011,Table - 1(viii)(Organotin compounds)	-	-	-
9(IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
9(IS - 17011,Table - 1(x)(pH)	-	-	-
9(IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	-	-
9(IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	-	-

23 Feb, 2029

-
Included w.e.f 17.09.2025 Exclusion: Cl 8.7.3 (Electrically insulating footwear)

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	250	-
6(Sizes and Fittines)	-	250	-
7(Consturction)	-	250	-
8.1(Lining Material)	-	250	-
8.2, Table-1 (i)(Width, mm, Min)	-	250	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	800	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	800	-
8.4(Use of Rubber material)	-	800	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	800	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	1000	-
8.5(Upper material)	-	500	-
8.5.1(Tensile Strength of upper)	-	800	-
8.5.2(Thickness)	-	500	-
8.5.3(Flexing Resistance)	-	1000	-
8.5.4(Abrasion Resistance)	-	1000	-
8.6.1(Thickness of Outsole)	-	500	-
8.6.2(Tear Strength)	-	800	-
8.6.3(Abrasion Resistance of Outsole)	-	1200	-
8.6.4(Flexing Resistance)	-	1000	-
8.6.5(Inter layer Bond Strength of outsole)	-	800	-
Cl-8.7(Insocks material)	-	500	-
8.7.1(Thickness of Insocks)	-	500	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	1000	-
Cl-8.8.1(Outsole/Heel)	-	500	-
Cl-8.9(Leak Proof Test)	-	800	-
8.10(Height of Upper)	-	500	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	800	-
Cl-8.12(Upper Outsole Bond Strength)	-	800	-
Cl-8.13(Internal Length of Toe Cap)	-	500	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	800	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	800	-
8.16(Banned Chemicals)	-	25000	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	1500	-
8.17(Steel Floor with Glycerine)	-	1500	-
8.18(Corrosion Resistant Test for Toe Caps)	-	800	-
9.1(Penetration Resistance)	-	1500	-
9.2(Antistatic Footwear)	-	1500	-
9.3(Flame Resistance Property)	-	1500	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	1000	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	1000	-
9.6(Resistance to Fuel Oil)	-	1200	-
11.2(Marking)	-	250	-

23 Feb, 2029

-
Included w.e.f 17.09.2025 Exclusion: Cl 9.4 (Electrical Resistance)

IS 10702 (2023)

Hawai Chappal-Specification

34800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	250	-
4.2(Length)	-	500	-
4.3(Thickness)	-	500	-
4.4 , Table No. 1 , i)(Density)	-	500	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	800	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1200	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1200	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	500	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	800	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	250	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	250	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	800	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	25000	-
6(MARKING AND PACKING)	-	250	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl.No. 5.2(lead content)	-	1000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	250	-
Clause 4.1 - 4.1.2(Strap Material)	-	250	-
Clause 4.1 - 4.1.3(Material)	-	250	-
Clause 4.1 - 4.1.4(Material)	-	250	-
Clause 4.2(Material)	-	250	-
Clause 4.3 - 4.3.1(Thickness)	-	500	-
Clause 4.3 - 4.3.2(Thickness)	-	500	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	500	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	800	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1200	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	500	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	500	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	800	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	800	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	250	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	250	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	250	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	250	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	800	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	800	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	800	-
Cl-4 ((Amendment No-1)(Category And Type)	-	250	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	800	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1200	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1200	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	1500	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	25000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	25000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	800	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-

23 Feb, 2029

-
Included w.e.f 04.08.2025

IS 13893 (1994)

Polyurethane soles semirigid - specification

4999 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	1000	-
4.3(Ross Flex test)	-	1500	-
4.3(Flexural strength )	-	1500	-
4.3(Abrasion Resistance)	-	1500	-
4.3(Elongation at break)	-	800	-
4.3(Tensile Strength )	-	800	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	500	-
4.2(Thickness )	-	250	-
4.1(Design)	-	250	-
5, 5.1, 5.2(Packing And Marking)	-	250	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	250	-
4.2 (Amendment 2)(Thickness)	-	250	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1500	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1500	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	1500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	800	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	800	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	800	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-

23 Feb, 2029

-
Included w.e.f.12.09.2025

IS 5852 : Part 2 (2019)

Toe Caps for Protection of Feet Ã¢â‚¬â€ Specification Part 2 Non-Metallic Toe Caps

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Internal length)	-	250	-
4.3.2(Width of flange)	-	250	-
4.4(Impact resistance)	-	1500	-
4.5(Compression resistance)	-	1500	-
5.5.2(Effect of high temperature)	-	1500	-
5.5.3(Effect of low temperature)	-	1500	-
5.5.4(Effect of fuel oil)	-	1500	-
6(Marking)	-	250	-
4.3.1(Internal length)	-	0	-
4.3.2(Width of flange)	-	0	-
4.4(Impact resistance)	-	0	-
4.5(Compression resistance)	-	0	-
5.5.2(Effect of high temperature)	-	0	-
5.5.3(Effect of low temperature)	-	0	-
5.5.4(Effect of fuel oil)	-	0	-
6(Marking)	-	0	-
4.3.1(Internal length)	-	-	-
4.3.2(Width of flange)	-	-	-
4.4(Impact resistance)	-	-	-
4.5(Compression resistance)	-	-	-
5.5.2(Effect of high temperature)	-	-	-
5.5.3(Effect of low temperature)	-	-	-
5.5.4(Effect of fuel oil)	-	-	-
6(Marking)	-	-	-

23 Feb, 2029

-
Included w.e.f. 21.08.2025

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4.1(Finishing)	-	250	-
4.2.1 - 1(Minimum internal length in mm)	-	250	-
4.2.2(Width of Flange)	-	250	-
4.3(Impact Resistance)	-	1500	-
4.4(Compression Resistance)	-	1500	-
4.5(Corrosion Resistance)	-	1000	-
5(Marking)	-	250	-
6(Packing)	-	250	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4.1(Finishing)	-	0	-
4.2.1 - 1(Minimum internal length in mm)	-	0	-
4.2.2(Width of Flange)	-	0	-
4.3(Impact Resistance)	-	0	-
4.4(Compression Resistance)	-	0	-
4.5(Corrosion Resistance)	-	0	-
5(Marking)	-	0	-
6(Packing)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4.1(Finishing)	-	-	-
4.2.1 - 1(Minimum internal length in mm)	-	-	-
4.2.2(Width of Flange)	-	-	-
4.3(Impact Resistance)	-	-	-
4.4(Compression Resistance)	-	-	-
4.5(Corrosion Resistance)	-	-	-
5(Marking)	-	-	-
6(Packing)	-	-	-

23 Feb, 2029

-
Included w.e.f. 21.08.2025

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

SHOES – SPECIFICATION, PART 2 SHOES FOR GENERAL PURPOSE

39999 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	150	-
Cl-5.3(Material)	-	500	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	800	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	800	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	800	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1000	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	1000	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	800	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	800	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	1000	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	1200	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	800	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1000	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	800	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	800	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	800	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1000	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	1200	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2000	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1000	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	800	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1000	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	800	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	800	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	1200	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	250	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1000	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1000	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	800	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	500	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	800	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	500	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	500	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1000	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	800	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	1000	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	800	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	800	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	800	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	800	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	800	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	1000	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	800	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	1000	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	800	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	800	-
Cl-8.1(Marking)	-	0	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	800	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	800	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	800	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	800	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	800	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	800	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Shoes: Shoes for General Purpose(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.1.4.1 of IS 17011(DMFU)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(pH)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	0	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	0	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	0	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	0	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o- aminoazotoluene)	-	0	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	0	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	0	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	0	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	0	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	0	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	0	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	0	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	0	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	0	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	0	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	0	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	0	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	0	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	0	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	0	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	0	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	0	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	0	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	0	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	0	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	0	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	0	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	0	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	0	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	0	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	0	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	0	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	0	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	0	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	0	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	0	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	0	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	0	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	0	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	0	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	0	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	0	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-

23 Feb, 2029

-
Included w.e.f. 30.07.2025 Exclusion: "Cl-6.1.2, Table-3 (i) (Colour fastness to light, Marring, Min) Cl-6.1.4, Table-5 (i) (Colour fastness to light, Marring, Min)"

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

42950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	150	-
Cl-4.3.1(Size)	-	150	-
Cl-4.3.2(Weight)	-	250	-
Cl-4.4(Height of Upper)	-	250	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	800	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	1500	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	1200	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1200	-
Cl-4.6.1(Material)	-	500	-
Cl-4.6.2(Tear Strength)	-	800	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1200	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	800	-
Cl-4.7.3(Abrasion Resistance)	-	1000	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1200	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	850	-
Cl-4.8.3(Water Absorption and Desorption)	-	850	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	500	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	800	-
Cl-4.12(Closing Thread)	-	800	-
Cl-4.13.2(Thickness)	-	500	-
Cl-4.13.3(Moulded Density)	-	800	-
Cl-4.13.4(Hardness)	-	800	-
Cl-4.13.5(Ageing Test)	-	1200	-
Cl-4.13.6(Tear Strength)	-	800	-
Cl-4.13.7(Abrasion Resistance)	-	1000	-
Cl-4.13.8(Flexing Resistance)	-	1000	-
Cl-4.14(Eyelet)	-	1300	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1600	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1000	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	800	-
Cl.4.5.3.2(Interlayer bond strength)	-	800	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	850	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
4.9 Insocks(Insock thickness)	-	500	-

23 Feb, 2029

-
Included w.e.f 04.08.2025

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	-
Cl 5.2.2, Table 4(" Height of upper ")	-	250	-
Cl 5.2.3(Heel area)	-	250	-
Cl 5.3.1.1(Construction of whole footwear)	-	150	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	800	-
Cl 5.3.2.1(Toe protection - general)	-	250	-
Cl 5.3.2.2(Internal length)	-	800	-
Cl 5.3.2.3(Width of toecap flange)	-	250	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	2500	-
Cl 5.3.2.6(Impact resistance)	-	1200	-
Cl 5.3.2.7(Compression resistance)	-	1200	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
Cl 5.3.7(Seam strength)	-	800	-
Cl 5.3.8(Lead Content ( National Annex A))	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	250	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	250	-
Cl 5.4.2(Thickness)	-	250	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	1200	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	-
Cl 5.4.7(Resistance to hydrolysis)	-	2000	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	850	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	850	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	250	-
Cl 5.8.2.2(Cleated area)	-	250	-
Cl 5.8.2.3(Cleat height)	-	250	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2000	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	150	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	250	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	2000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1200	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	150	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	150	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	150	-
Cl 6.2.8.3(Resistance to cutting)	-	1200	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	-
Cl 6.4.3.2(Design of Ladder grip)	-	250	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	250	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	150	-

23 Feb, 2029

-
Included w.e.f. 11.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

Bureau of Indian Standards

The National Standards Body of India

Atharva Laboratories Pvt. Ltd. (C-54), Noida

C-54, Hosiery Complex, Phase-II, Noida-201305, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201305

7065088001 atharvalaboratories2@gmail.com

Scope List