BIS - LIMS (Laboratory Information Management System)

Elenergy Lab Research Pvt. Ltd., Bengaluru

No.135, Road 10, KIADB IT Park, Aribinnamangala Village, Jala Hobli, Bengaluru, Manchappanahosahalli, Karnataka 562149, Bengaluru, Bengaluru Rural, Karnataka, 562149

9606009162 cs@elenergylab.com

Scope List

Reset

5 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

Class 0.2S,0.5S, & 1.0S, 5 A to 6 A

201000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.12(Test of meter constant)	-	2000	-
6.10.6(ac high voltage test)	-	2500	-
6.10.6(Insulation test)	-	1500	-
6.12(Test of ambient temperature influence)	-	7500	-
6.10.5(Test of influence of heating)	-	4500	-
6.10.7(Test of immunity to earth/phase fault)	-	3000	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	5500	-
6.12(Magnetic induction of External Origin 0.5mT)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	5500	-
6.11(Fast transient burst test)	-	6000	-
6.12(Frequency Variation)	-	4000	-
6.12(Reversed Phase Sequence)	-	4000	-
6.12(Voltage Unbalanced)	-	4000	-
6.12(Voltage Variation)	-	4000	-
6.12(Waveform 10% of 3rd Harmonics)	-	4000	-
6.10.3(Test of influence of short time over currents)	-	3000	-
6.12(Test of repeatability of error)	-	7500	-
6.12(Test on limits of error)	-	15000	-
6.10.6(Impulse voltage test)	-	15000	-
6.3(Clearance and creepage distances)	-	2500	-
6.11(Surge Immunity test)	-	5000	-
6.10.4(Test of influence of self-heating)	-	3000	-
6.12(Test of no-load condition)	-	2000	-
6.10.1(Test of power consumption)	-	3000	-
6.12(Test of starting condition)	-	2000	-
6.10.2(Test of influence of supply voltage)	-	4500	-
6.9(Damp heat cyclic test)	-	25000	-
6.5(Test of protection against penetration of dust and water)	-	6000	-
6.5(Shock test)	-	5000	-
6.5(Spring hammer test)	-	1000	-
6.4(Test of resistance to heat and fire)	-	2000	-
6.5(Vibration test)	-	7500	-
6.9(Cold test)	-	15000	-
6.9(Dry heat test)	-	15000	-
6.8.1(Additional information)	-	2500	-
6.8(Connection diagrams and terminal marking)	-	2500	-
6.8(BIS Standard Mark)	-	2500	-
6.8(Marking of meters Name plate)	-	2500	-
10.0(Smart Meter Functional Requirements)	-	0	-
8, 9.5(Smart Meter Communicability)	-	0	-
9.3(Test of Display)	-	0	-
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	0	-
Note b of Table 1(Access and data read test)	-	0	-
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	0	-
6.12(Operation of Accessories)	-	0	-
6.12(Test of influence quantities)	-	42000	-
6.7(Output device)	-	2500	-
6.6(Display of measured values)	-	2500	-
6.2.2(Insulating encased meter)	-	2500	-
6.2.2(Terminal Cover(s))	-	2500	-
6.2.1(Heat Deflection Test)	-	2500	-
6.2.1(Terminals, terminal block and protective earth terminal)	-	2500	-
6.2(Communication module)	-	2500	-
6.2(Window)	-	2500	-
6.2(Meter case)	-	2500	-
6.2(General Constructional requirements)	-	2500	-
10(Smart Meter Functional Requirement)	-	0	-
9.5(Test for Smart meter communicability )	-	0	-
9.4(Test for Data Exchange Protocol)	-	0	-
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.10.7((9.6 of IS 14697 ) Insulation Rtequirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.10.6((9.5 of IS 14697 ) Insulation Requirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
9.3(Measurement)	-	0	-
6.8(Inspection )	-	2500	-
6.8(Inspection ( 7 of IS 14697) )	-	2500	-
6.7(Inspection ( 6.11 of IS 14697))	-	2500	-
6.6(Inspection ( 6.10 of IS 14697))	-	2500	-
6.3(Measurement ( 6.6 of IS 14697))	-	2500	-
6.2(General constructional Requirement)	-	2500	-
6.2(General constructional Requirement)	-	2500	-

08 May, 2028

-
Exclusions -6.11 (Test of immunity to electromagnetic HF field), 6.11 (Test of immunity to electrostatic discharge), 6.11 (Radio interference measurement)

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

Class 0.2 S,0.5 S & 1 S, 5 A to 10 A

183500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.14, 11.6(Test of Meter Constant/Registration)	-	1500	-
12.7.6.3, 9.5(ac Voltage test)	-	2500	-
12.7.6.4(Insulation resistance test)	-	1500	-
12.11, 11.3(Test of Ambient Temperature Influence)	-	6000	-
12.7.5, 9.4(Test of Influence of Heating)	-	4500	-
12.17, 9.6(Test of Immunity to Earth/Phase Fault)	-	3000	-
12.10, 11.2(Test of Influence Quantities)	-	32000	-
"12.8.4(Fast Transient Burst Test)	-	6000	-
12.7.3, 9.2.3()	-	3000	-
12.16, 11.7(Repeatability of Error Test)	-	5500	-
11.1(Limits of Error Due to Variation of the Current)	-	12500	-
12.7.6.2, 9.5()	-	4000	-
6.6(Clearance and Creepage Distance)	-	2500	-
12.8.5, 10.1(Surge Immunity test)	-	5000	-
12.7.4, 9.3(Test of Influence of Self-Heating)	-	3000	-
12.12, 11.4(Test of No-Load Condition)	-	1500	-
12.7.1, 9.1(Test of Power Consumption)	-	3000	-
12.13, 11.5(Test of Starting Conditions)	-	1500	-
12.7.2, 9.2.2(Test of Influence of Supply Voltage)	-	4500	-
12.6.3(Damp Heat Cycle Test)	-	25000	-
12.5(Protection against penetration of dust and water)	-	6000	-
12.3.1(Shock test)	-	5000	-
12.3.3(Spring hammer test)	-	1000	-
12.4(Test of resistance to heat and fire)	-	2000	-
12.3.2(Vibration test)	-	7500	-
12.6.2(Cold Test)	-	15000	-
12.6.1(Dry heat test)	-	15000	-
"12.8.5(Surge Immunity Test)	-	5000	-
6.1(General)	-	2500	-
6.2(Meter Case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	2500	-
6.5(Terminal Cover(s))	-	2500	-
12.6.3(Damp Heat Cycle Test)	-	25000	-
6.7(Insulating Encased Meter)	-	2500	-
6.10(Display of Measured Values)	-	2500	-
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	3000	-
6.11(Output Device)	-	2500	-
9.4 & 12.7.5(Influence of Heating)	-	4500	-
7.1(Name Plate)	-	2500	-
7.2(Connections, Diagrams and Terminal Marking)	-	2500	-
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	1000	-
11.2(Auxiliary voltage ± 15 percent)	-	1000	-
12.15(Interpretation of Test Results)	-	1500	-
11.4.1(Initial Start-up of the Meter)	-	1500	-
6(General and Constructional requirements)	-	2500	-
6.1(General)	-	2500	-
6.2(Meter case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, terminals block(s) and protective earth terminal)	-	2500	-
6.5(Terminal Cover(s))	-	2500	-
6.6(Clearance and creepage distances)	-	2500	-
6.7()	-	2500	-
6.10(Display of measured values)	-	2500	-
6.11(Output device)	-	2500	-
7.1 a)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 b)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 c)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 d)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 e)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 f)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 g)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 h)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 j)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 k)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 m)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 n)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 p)(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1.1(BIS certification Marking)	-	2500	-
7.2(Connection diagrams and terminal marking)	-	2500	-
8(Climatic Conditions)	-	0	-
9.3 & 12.7.4(Influence of Self-heating)	-	3000	-
9.2.3 & 12.7.3(Short Time Over Current)	-	3000	-
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	4500	-
9.1 & 12.7.1(Power Consumption)	-	3000	-
12.6.2(Cold Test)	-	15000	-
12.6.1(Dry Heat Test)	-	15000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
6.8, 12.4(Test of Resistance to Heat and Fire)	-	2000	-
12.4, 6.8(Test of Resistance to Heat and Fire)	-	2000	-
12.3.1(Shock Test)	-	5000	-
12.3.2(Vibration Test)	-	7500	-
12.3.3(Spring Hammer Test)	-	1000	-
11.7, 12.16(Repeatability of Error Test)	-	5500	-
11.6, 12.14(Meter Constant)	-	1500	-
11.5, 12.13(Test of Starting Conditions)	-	1500	-
11.4, 12.12(Test of No-Load Condition)	-	1500	-
11.3, 12.11(Test of Ambient Temperature Influence)	-	6000	-
11.2, 12.10(Limits of error due to other Influence Quantities)	-	12500	-
12.15(Limits of Error and Interpretation or Test Results)	-	12500	-
11.1(Limits of error due to variation of the current)	-	12500	-
10.1, 12.8.4(Fast Transient Burst Test)	-	6000	-
12.8.4, 10.1(Fast Transient Burst Test)	-	6000	-
10.1, 12.8.5(Surge Immunity test)	-	5000	-
9.5, 12.7.6.2(Impulse voltage test)	-	4000	-
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	12500	-
11.6 & 12.14(Meter Constant)	-	1500	-
11.7 & 12.16(Repeatability of Error Test)	-	5500	-
12.13 & 11.5(Starting Current)	-	1500	-
11.4.2 & 12.12(Running with No-Load)	-	1500	-
9.5, 12.7.6.3(ac Voltage test)	-	2500	-
9.5 & 12.7.6.2(Impulse voltage test)	-	4000	-
9.5 & 12.7.6.3(a.c. voltage test)	-	2500	-
9.6, 12.17(Test of Immunity to Earth/Phase Fault)	-	3000	-
9.4, 12.7.5(Test of Influence of Heating)	-	4500	-
11.2(Electrical fast transient burst)	-	6000	-
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	3750	-
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	3750	-
11.2(Magnetic induction of external origin 0.5 mT)	-	3750	-
11.2(Continuous magnetic induction of external origin)	-	3750	-
11.2(Voltage unbalance)	-	3000	-
11.2(Reversed phase sequence)	-	3000	-
11.2(Wave form: 10 percent of third harmonic in the current)	-	3000	-
11.2(Frequency variation)	-	3000	-
11.2(Voltage variation)	-	3000	-
12.7.6.1, 9.5(Test of insulation Properties : General test conditions)	-	0	-
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	0	-
12.7.6.4, 9.5()	-	1500	-
9.5, 12.7.6.4()	-	1500	-
12.9.1(Test of Accuracy Requirements : General Test Conditions)	-	0	-
9.1, 12.7.1(Test of Power Consumption)	-	3000	-
9.2.1(Test of Influence of Supply Voltage)	-	4500	-
9.2.2, 12.7.2(Test of Influence of Supply Voltage)	-	4500	-
9.2.3 12.7.3(Test of Influence of Short-time Overcurrents)	-	3000	-
9.3, 12.7.4(Test of Influence of Self-Heating)	-	3000	-

08 May, 2028

-
Exclusions -12.8.6 (Radio Interference Measurement), 12.8.3 (Test for Immunity to Electromagnetic HF Fields), Test for Immunity to Electrostatic Discharge (ESD), 11.2 (Electromagnetic HF fields), 10.1, 12.8.2 (Test for Immunity to Electrostatic Discharge (ESD)), 12.8.2, 10.1 (Test for Immunity to Electrostatic Discharge (ESD)), 10.1, 12.8.3 (Test for immunity to electromagnetic HF field), 12.8.3, 10.1 (Test for immunity to electromagnetic HF field), 12.8.6, 10.2 (Radio Interference Measurement), 10.2, 12.8.6 (Radio Interference Suppression)

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

Class 1 & 2 5A to 120A

209000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.12(Test of meter constant)	-	2000	-
6.10.6(ac high voltage test)	-	2500	-
6.10.6(Insulation resistance test)	-	1500	-
6.12(Test of ambient temperature influence)	-	7500	-
6.10.5(Test of influence of heating)	-	4500	-
6.10.7(Test of influence of immunity to earth fault)	-	3000	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	5500	-
6.12(DC & Even Harmonics in the ac current circuit)	-	8000	-
6.12(Frequency Variation)	-	4000	-
6.12(Magnetic induction of External Origin 0.5mT)	-	5500	-
6.12(Reversed Phase Sequence)	-	4000	-
6.12(Voltage Unbalanced)	-	4000	-
6.12(Waveform 10% of 3rd Harmonics)	-	4000	-
6.10.1(Test of influence of short time over currents)	-	3000	-
6.12(Test of repeatability of error )	-	7500	-
6.12(Test on limits of error due to variation of the current)	-	15000	-
6.10.6(Impulse voltage test)	-	4000	-
6.3(Clearance and creepage distances)	-	2500	-
6.11(Surge Immunity test)	-	5000	-
6.10.4(Test of influence of self-heating)	-	3000	-
6.12(Test of no-load condition)	-	2000	-
6.10.1(Test of power consumption)	-	3000	-
6.12(Test of starting condition)	-	2000	-
6.10.1(Test of influence of supply voltage)	-	4500	-
6.9(Damp heat cyclic test)	-	25000	-
6.5(Protection against penetration of dust and water)	-	6000	-
6.5(Shock test)	-	5000	-
6.5(Spring Hammer test)	-	1000	-
6.5(Test of resistance to heat and fire)	-	2000	-
6.5(Vibration test)	-	7500	-
6.9(Cold test)	-	15000	-
6.9(Dry heat test)	-	15000	-
6.11(Fast transient burst test)	-	6000	-
cl. 12.7.6.2 of IS 13779(Impulse voltage test)	-	4000	-
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	2500	-
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	1500	-
cl. 11.1 of IS 13779(Limits of Error Due to Variation of tile Current)	-	15000	-
cl. 11.2 of IS 13779(Limits of Error Due to Other Influence Quantities (Voltage-Variation, Frequency Variation, Phase-Sequence, Wave Form, Voltage-Unba.ance))	-	15000	-
cl. 11.3 of IS 13779(Limits of Error Due to Ambien! Temperature Variation )	-	15000	-
cl. 11.4 of IS 13779(Starting and Running w'th No-Load)	-	2000	-
cl. 11.5 of IS 13779(Starting Current)	-	2000	-
cl. 11.6 of IS 13779(Meter Constant)	-	2000	-
cl 11.1 of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.16 a) of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.16 b) of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.16 c) of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.15 of IS 13779(Test of Meter Constant/Registration)	-	2000	-
12.14 of IS 13779(Test of Starting Conditions)	-	2000	-
12.13 of IS 13779(Test of No-Load Condition)	-	2000	-
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	7500	-
12.17 of IS 13779(Repeatability of Error Test )	-	7500	-
12.7.1 of IS 13779(Test of Power Consumption)	-	3000	-
12.7.2 of IS 13779(Test of Influence of Supply Voltage)	-	4500	-
12.7.3 of IS 13779( Test of Influence of Short-time Overcurrents)	-	3000	-
12.7.4 of IS 13779(Test of Influence of Self-Heating)	-	3000	-
12.7.5 of IS 13779(Test of Influence of Heating)	-	4500	-
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	3000	-
12.9.4 of IS 13779(FastTransient BurstTest)	-	6000	-
12.6.1 of IS 13779(Dry Heat Test)	-	15000	-
12.6.2 of IS 13779(Cold Test)	-	15000	-
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	25000	-
12.3.1 of IS 13779(Shock Test)	-	5000	-
12.3.2 of IS 13779(Vibration Test)	-	7500	-
12.3.3 of IS 13779( Spring Hammer Test)	-	1000	-
12.5 a) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5 b) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	2000	-
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	3000	-
4.4.4 of IS 15844(Influence of Self-Heating)	-	3000	-
4.4.5 of IS 15844(Influence of Heating)	-	4500	-
6.7(Output device)	-	2500	-
6.6(Display of measured values)	-	2500	-
6.2.2(Insulating encased meter)	-	2500	-
6.2.2(Terminal Cover(s))	-	2500	-
6.2.1(Heat Deflection Test)	-	2500	-
6.2.1(Terminals, terminal block and protective earth ter-minal)	-	2500	-
6.2(Communication module Load switch)	-	2500	-
6.2(Window)	-	2500	-
6.2(Meter case)	-	2500	-
6.2(General and constructional requirements)	-	2500	-
6.2(General constructional Requirement)	-	2500	-
6.2(General constructional Requirement)	-	2500	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
cl. 7.1 a) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 b) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 c) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 d) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 e) of of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 f) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 g) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 h) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 j) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 k) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 m) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 p) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 n) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
12.10.1 a) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 b) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 c) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 d) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 e) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 f) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.11 of IS 13779(Test of Iniluence Quantities)	-	31500	-
4.4.2.1 of IS 15844(Voltage range)	-	0	-
4.4.2.2 of IS 15844( Specified operating range )	-	0	-
4.4.2.3 of IS 15844(Extended operating range)	-	0	-
4.4.2.4 of IS 15844( Limit range of operation)	-	0	-
4.4.2.5 of IS 15844(Withstand range)	-	0	-
4.4.2.6 of IS 15844(Abnormal voltage conditions)	-	0	-
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	0	-
4.4.6 of IS 15844(Insulation)	-	0	-
6.8(BIS Standard Mark)	-	0	-
6.8(Marking of smart meters Name plate)	-	0	-
11.0(Smart meter functional requirements)	-	0	-
9, 10.6(Test of Smart Meter Communicability)	-	0	-
10.3(Test of Display)	-	0	-
8.0(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (Verification up to two Port))	-	0	-
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	0	-
7.2, 10.4(Dielectric strength (G-8))	-	0	-
7.2, 10.4(Minimum switched current (G-7))	-	0	-
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	0	-
7.2, 10.4(Fault current making capacity (G-5))	-	0	-
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	0	-
7.2, 10.4(Electrical endurance (G-3))	-	0	-
7.2, 10.4(Normal operation (G-2))	-	0	-
Note 1c of Table 1(Remote disconnect/connect)	-	0	-
Note 1b of Table 1(Access and data read test)	-	0	-
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	0	-
6.12(Operation of Accessories)	-	0	-
6.12(Test of influence quantities)	-	31500	-
6.8.1(Additional information)	-	0	-
6.8(Connection diagrams and terminal marking)	-	0	-
Table 1 (Note 1)(Schedule of type tests)	-	0	-
Table 1 (Note 1)(Schedule of type tests)	-	0	-
10.6.2(Test for Smart meter communicability )	-	0	-
10.5(Test for Data Exchange Protocol)	-	0	-
10.4(Test for Load Switch)	-	0	-
10.3(Inspection)	-	0	-
6.8(Inspection)	-	2500	-
6.8(Inspection)	-	2500	-
6.7(Inspection)	-	2500	-
6.7(Inspection)	-	2500	-
6.6(Inspection)	-	2500	-
6.3(Measurement)	-	2500	-
11(Smart Meter Functional Requirement)	-	0	-
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.12(Voltage Variation)	-	3000	-

08 May, 2028

-
Test for Immunity to Electrostatic Discharge (ESD), Test for Immunity to Electromagnetic HF Fields, Radio Interference Measurement, Test for Immunity to Electromagnetic HF Fields, Test for Immunity to Electrostatic Discharge (ESD), Radio Interference Measurement

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

Class 1 & 2 5A to 120A

198500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6.5(As per cl 4.6.5)	-	2000	-
5.4.6.3(Table 15, power source 500 VA)	-	2500	-
5.4.6.4(500±50V dc)	-	1500	-
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	15000	-
5.4.5(As per cl 4.4.5)	-	4500	-
4.6.2(As per table 12)	-	50000	-
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	6000	-
5.4.3(Table 8, as per cl4.4.3)	-	3000	-
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	7500	-
4.6.1(As per table 10 & 11, cl 5.6.1)	-	15000	-
5.4.6.2(12.7.6.2 of IS 13779)	-	4000	-
4.2.6(By measurement)	-	2500	-
5.5.6(according to IEC 61000- 4-5)	-	5000	-
5.4.4(Table 9, and cl 4.4.4)	-	3000	-
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	2000	-
5.4.1(As per 4.4.1.1)	-	3000	-
5.6.4(As per cl 4.6.3, Table 13)	-	2000	-
5.4.2(As per 4.4.2.1)	-	4500	-
5.3.3(As per cl 5.4.6)	-	25000	-
5.2.5(Protection against penetration of dust (IP5X))	-	6000	-
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	1000	-
5.2(Test of mechanical requirements)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water,Test of resistance to heat and fire
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	2000	-
5.2.3(As per IS 9000 (Part 8))	-	7500	-
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	15000	-
4(General Requirements)	-	0	-
4.1.1(By Inspection)	-	0	-
4.1.2(By Inspection)	-	0	-
4.1.3(By Inspection)	-	0	-
4.1.4(By Inspection)	-	0	-
4.2(Mechanical Requirements)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.3(By Inspection)	-	2500	-
4.2.4(IS 13360 (Part 6/Sec 17) for a temperature of 135°C and a pressure of 1.8 MPa (Method A).)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By inserting copper conductor of appropriate size)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.5(shall have a separate cover which can be sealed independently of the meter cover. The terminal cover shall enclose the actual terminals)	-	2500	-
4.2.5(The terminals their fixing screws, a suitable length of external insulated conductor and its insulation shall be enclosed by a cover with a provision for sealing. )	-	2500	-
4.2.5(The fixing screws used on the terminal cover for fixing and sealing shall be held captive in the terminal cover.)	-	2500	-
4.2.6(By measurement)	-	2500	-
4.2.6(By measurement)	-	2500	-
4.2.6(By measurement)	-	2500	-
4.2.7(Standard test fingure)	-	2500	-
4.2.10(Display of measured values)	-	2500	-
4.2.10.1(By inspection)	-	2500	-
4.2.10.1(By inspection)	-	2500	-
4.2.10.1(By inspection)	-	2500	-
4.2.10.2(By inspection)	-	2500	-
4.2.10.3(By measurement)	-	2500	-
4.2.10.4(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.6(By inspection)	-	2500	-
4.2.10.6(By inspection)	-	2500	-
4.2.10.6(By inspection)	-	2500	-
4.2.10.7(By inspection)	-	2500	-
4.2.10.7(By inspection)	-	2500	-
4.2.10.8(Fig. 4, annexure F)	-	2500	-
4.2.10.9(Fig. 5, annexure F)	-	2500	-
4.2.10.9(Fig. 5, annexure F)	-	2500	-
4.2.11(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
5.4.6(As per IS 2071 (Part1))	-	0	-
4.6.6.2 , annexure G -8(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -7(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -6(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -5(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -4(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -3(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -2(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 .1(Load switching capability)	-	0	-
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.2.12(Test on Token Carrier Interface)	-	0	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
6(Functional Requirements)	-	0	-
Annexure A(Functional Performance)	-	0	-
4.2.12.3(Keypad Interface)	-	0	-
4.2.10.9(General requirements- Optical characteristics)	-	0	-
4.2.10.8(General requirements- Mechanical and electrical characteristics)	-	0	-
5.8(Test of Load Switch)	-	0	-
5.9(Test of Consumption-Based charging function)	-	0	-
5.10(Test of Time-Based charging function)	-	0	-
4.6.6.2.2(Performance requirement for load switching Utilization category UC2 (Annex G.))	-	0	-
4.6.6.2.2 & G2(Normal operation)	-	0	-
4.6.6.2.2 & G3(Electrical endurance)	-	0	-
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	0	-
4.6.6.2.2 & G5(Fault current making capacity)	-	0	-
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	0	-
4.6.6.2.2 & G7(Minimum switched current)	-	0	-
4.6.6.2.2 & G8(Dielectric strength)	-	0	-
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	0	-
4.2.5(When the meter is mounted on the meter board, no access to the terminals shall be possible without breaking the seal of the terminal cover.)	-	0	-
5.4.6.2(12.7.6.2 of IS 13779)	-	4000	-
5.6(As per cl 4.6)	-	0	-
5.4(As per 5.6.1)	-	0	-
4.4.2(Table 7)	-	0	-
5.3(Tests of Climatic Influences)	-	0	-
5.5.6(according to IEC 61000- 4-5)	-	5000	-
5.5.6(Surge Immunity Test)	-	5000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	25000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	25000	-
5.3.3(Visual examination)	-	25000	-
5.2.1(As per cl 12.3.3 of IS 13779)	-	1000	-
5.2.5(As per IS 12063)	-	6000	-
5.2.5(500 V dc)	-	6000	-
5.2.5(Protection against penetration of water (IP1X))	-	6000	-
5.2.5(As per IS 12063)	-	6000	-
5.2.5(500 V dc)	-	6000	-
4.6.3(Limits of error due to Ambient temperature Variation)	-	15000	-
5.5(Test of electromagnetic compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
5.4.4(Table 9, and cl 4.4.4)	-	3000	-
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	4000	-

08 May, 2028

-
Radio Interference Measurement, Test for Immunity to Electromagnetic HF Fields, Test for Immunity to Electrostatic Discharge (ESD), Test for Immunity to Electrostatic Discharge (ESD)

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

Class 1 & 2 5A to 120 A

186500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.15 & 11.6(Test of meter constant)	-	1500	-
12.7.6.3(ac high voltage test)	-	2500	-
12.7.6.4(Insulation resistance test)	-	1500	-
12.12 & 11.3(Test of ambient temperature influence)	-	6000	-
12.7.5(Test of influence of heating)	-	4500	-
12.8(Test of immunity to earth/phase fault)	-	3000	-
12.11, 11.2(Test of Influence Quantities)	-	35000	-
12.7.3(Test of influence of short time over currents)	-	3000	-
12.17, 11.7(Repeatability of Error Test)	-	5500	-
11.1(Test on limits of error due to variation of current)	-	12500	-
12.7.6.2(Impulse voltage test)	-	4000	-
6.6(Clearance and creepage distances)	-	2500	-
12.9.5, 10.1(Surge Immunity test)	-	5000	-
12.7.4(Test of Influence of self heating)	-	3000	-
12.13, 11.4(Test of No-Load Condition)	-	1500	-
12.7.1(Test of power consumption)	-	3000	-
12.14, 11.5(Test of Starting Conditions)	-	1500	-
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	3000	-
12.6.3(Damp Heat Cycle Test)	-	25000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.3.1(Shock test)	-	5000	-
12.3.3(Spring hammer test)	-	1000	-
12.4(Test of resistance to heat and fire)	-	2000	-
12.3.2(Vibration Test)	-	7500	-
12.6.2(Cold Test)	-	15000	-
12.6.1(Dry heat test)	-	15000	-
12.9.4, 10.1(Fast Transient Burst Test)	-	6000	-
6.1(General)	-	2500	-
6.2(Meter Case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, terminal block and protective earth terminal)	-	2500	-
6.5(Terminals covers and Extended Terminal Cover)	-	2500	-
6.7(Insulating encased meter)	-	2500	-
6.10(Display of measured values)	-	2500	-
6.11(Output device)	-	2500	-
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	4000	-
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	4000	-
6(General and Constructional requirements)	-	2500	-
6.1(General)	-	2500	-
6.2(Meter case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, terminals block(s) and protective earth terminal)	-	2500	-
6.5(Terminal Cover(s))	-	2500	-
6.6(Clearance and creepage distances)	-	2500	-
6.7(Insulating encased meter)	-	2500	-
6.10(Display of measured values)	-	2500	-
6.11(Output device)	-	2500	-
9.5, 12.7.6.2(Impulse voltage test)	-	4000	-
12.7.6.2, 9.5(Impulse voltage test)	-	4000	-
12.7.6.3, 9.5(ac Voltage test)	-	2500	-
9.5, 12.7.6.3(ac Voltage test)	-	2500	-
12.7.6.4, 9.5(Insulation resistance test)	-	1500	-
9.5, 12.7.6.4(Insulation resistance test)	-	1500	-
12.7.1, 9.1(Test of Power Consumption)	-	3000	-
9.1, 12.7.1(Test of Power Consumption)	-	3000	-
9.2.1(Test of Influence of Supply Voltage)	-	4500	-
12.7.2, 9.2.2(Test of Influence of Supply Voltage)	-	4500	-
9.2.2, 12.7.2(Test of Influence of Supply Voltage)	-	4500	-
12.7.3, 9.2.3(Test of Influence of Short-time Overcurrents)	-	3000	-
9.2.3, 12.7.3(Test of Influence of Short-time Overcurrents)	-	3000	-
12.7.4, 9.3(Test of Influence of Self-Heating)	-	3000	-
9.3, 12.7.4(Test of Influence of Self-Heating)	-	3000	-
12.7.5, 9.4(Test of Influence of Heating)	-	4500	-
9.4, 12.7.5(Test of Influence of Heating)	-	4500	-
12.8, 9.6(Test of Immunity to Earth/Phase Fault)	-	3000	-
9.6, 12.8(Test of Immunity to Earth/Phase Fault)	-	3000	-
10.1, 12.9.4(Fast Transient Burst Test)	-	6000	-
10.1, 12.9.5(Surge Immunity test)	-	5000	-
11.1(Limits of error due to variation of the current)	-	12500	-
12.16(Limits of Error and Interpretation or Test Results)	-	12500	-
11.2, 12.11(Limits of error due to other Influence Quantities)	-	12500	-
11.3, 12.12(Test of Ambient Temperature Influence)	-	6000	-
12.12, 11.3(Test of Ambient Temperature Influence)	-	6000	-
11.4, 12.13(Test of No-Load Condition)	-	1500	-
11.5, 12.14(Test of Starting Conditions)	-	1500	-
11.6, 12.15(Meter Constant)	-	1500	-
12.15, 11.6(Test of Meter Constant/Registration)	-	1500	-
11.7, 12.17(Repeatability of Error Test)	-	5500	-
12.3.1(Shock Test)	-	5000	-
12.3.3(Spring Hammer Test)	-	1000	-
6.8, 12.4(Test of Resistance to Heat and Fire)	-	2000	-
12.4, 6.8(Test of Resistance to Heat and Fire)	-	2000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.6.1(Dry Heat Test)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
AC static watihour meters, class 1 and 2 - Specification (First Revision)(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
7.1 a)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 b)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 c)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 d)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 e)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 f)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 g)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 h)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 j)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 k)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 m)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 n)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 p)(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1.1(BIS certification Marking)	-	2500	-
7.2(Connection diagrams and terminal marking)	-	2500	-
8(Climatic Conditions)	-	0	-
12.7.6.1, 9.5(Test of insulation Properties : General test conditions)	-	0	-
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	0	-
12.10.1(Test of Accuracy Requirements : General Test Conditions)	-	0	-
4(Classification)	-	0	-
5.1(Standard Reference Voltages)	-	0	-
5.2(Standard Basic Currents)	-	0	-
5.3(Rated Maximum Current)	-	0	-
5.4(Standard Frequency)	-	0	-
12.16 & 11.7(Test of repeatability of error)	-	5500	-
7.1(Name Plate)	-	2500	-
7.2(Connection diagrams and terminal marking)	-	2500	-
12.14 & 11.5(Test of starting condition)	-	1500	-
12.3.2(Vibration test)	-	2500	-
12.13 & 11.4(Test of no-load condition)	-	1500	-
12.5(Test of protection against penetration of dust and water)	-	6000	-
11.2(Test on limits of error due to other influence quantities)	-	12500	-
12.6.2(Cold test)	-	15000	-
12.6.3(Damp heat cyclic test)	-	25000	-
12.9.5(Surge Immunity Test)	-	5000	-
12.7.1(Test of power consumption)	-	6000	-
12.9.4(Fast transient burst test)	-	6000	-
12.7.2(Test of influence of supply voltage)	-	4500	-
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	3000	-
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	3000	-
12.7.6.4(Insulation resistance test)	-	1500	-

08 May, 2028

-
Exclusions -12.9.6 (Radio Interference Measurement), 12.9.3 (Test of Immunity to electromagnetic HF field), 12.9.2 (Test of Immunity to electrostatic discharge), 10.1, 12.9.2 (Test for Immunity to Electrostatic Discharge (ESD)), 12.9.2, 10.1 (Test for Immunity to Electrostatic Discharge (ESD)), 10.1, 12.9.3 (Test for immunity to electromagnetic HF field), 12.9.3, 10.1 (Test for immunity to electromagnetic HF field), 12.9.6, 10.2 (Radio Interference Measurement), 10.2, 12.9.6 (Radio Interference Measurement)

Bureau of Indian Standards

The National Standards Body of India

Elenergy Lab Research Pvt. Ltd., Bengaluru

No.135, Road 10, KIADB IT Park, Aribinnamangala Village, Jala Hobli, Bengaluru, Manchappanahosahalli, Karnataka 562149, Bengaluru, Bengaluru Rural, Karnataka, 562149

9606009162 cs@elenergylab.com

Scope List