BIS - LIMS (Laboratory Information Management System)

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

PLOT NO 7A, AVINASH LOGESTIC PARK, SKS ROAD, SILTARA INDUSTRIAL AREA, PHASE - 2, RAIPUR, Raipur, Chhattisgarh, 493221

9914663040 info@qipl.org

Scope List

Reset

68 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

YST 160 / YST 210 / YST 240 / YST 310 / YST 355, Cold Formed / Hot Formed

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	500	Complete Testing Charges
Clause.4.0(Carbon)	-	500	Complete Testing Charges
Clause.4.0(Sulphur)	-	500	Complete Testing Charges
Clause.4.0(Sulphur)	-	500	Complete Testing Charges
Clause.4.0(Phosphorus)	-	500	Complete Testing Charges
Clause.4.0(Silicon)	-	14900	Complete Testing Charges
Clause.4.0(Manganese)	-	500	Complete Testing Charges
Clause.5.0(Supply of Material)	-	500	Complete Testing Charges
Clause.5.0(Supply of Material)	-	500	Complete Testing Charges
Clause.6.0(Workmanship)	-	500	Complete Testing Charges
Clause.7.0(Straightness)	-	500	Complete Testing Charges
Clause.8.0(Basis of Calculation)	-	500	Complete Testing Charges
Clause.9.0(Length)	-	500	Complete Testing Charges
Clause.10.0(Dimensions and properties)	-	500	Complete Testing Charges
Clause.10.0(Dimensions and properties)	-	500	Complete Testing Charges
Clause.11.0(General)	-	500	Complete Testing Charges
Clause.11.0(Outside Dimension)	-	500	Complete Testing Charges
Clause.11.0(Thickness)	-	500	Complete Testing Charges
Clause.11.0(Thickness)	-	500	Complete Testing Charges
Clause.11.0(Concavity and Convexity)	-	500	Complete Testing Charges
Clause.11.0(Squareness of Sides)	-	500	Complete Testing Charges
Clause.11.0(External Corner Radiius)	-	500	Complete Testing Charges
Clause.11.0(Straightness and twist)	-	500	Complete Testing Charges
Clause.12.0(Dimension Tolerances)	-	500	Complete Testing Charges
Clause.12.0(Dimension Tolerances)	-	500	Complete Testing Charges
Clause.13.0(Surface Protection)	-	500	Complete Testing Charges
Clause.14.0(Testing)	-	500	Complete Testing Charges
Clause.15.0(Tensile test)	-	500	Complete Testing Charges
Clause.15.0(Yield strength)	-	1000	Complete Testing Charges
Clause.15.0(Elognation Percent)	-	1000	Complete Testing Charges
Clause.18.0(Marking)	-	500	Complete Testing Charges
6(Workmanship)	-	500	Complete Testing Charges
10(Dimensions and Properties)	-	500	Complete Testing Charges
11(Measurement of Shape and Size)	-	500	Complete Testing Charges
12(Dimensions and Tolerances)	-	500	Complete Testing Charges
13(Surface Protection)	-	500	Complete Testing Charges
15(Tensile Test)	-	1000	Complete Testing Charges

-
-

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Type A / Type B for Designation 1, 2, 3, 4, 5, 6

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	500	Complete Testing Chargers
5 Table-1(Sizes Diameter of Line wire)	-	500	Complete Testing Chargers
5 Table-1(Sizes Diamater of Point wire)	-	500	Complete Testing Chargers
5 Table-1(Sizes Mass of Completed barbed wire)	-	500	Complete Testing Chargers
5 Table-1(Sizes Distance between two barbs)	-	500	Complete Testing Chargers
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	500	Complete Testing Chargers
7.1(Manufacture)	-	500	Complete Testing Chargers
7.2(Manufacture)	-	500	Complete Testing Chargers
7.2(Manufacture)	-	500	Complete Testing Chargers
7.3(Manufacture)	-	500	Complete Testing Chargers
12.1(Tensile Strength)	-	1000	Complete Testing Chargers
12.1(Breaking load)	-	1000	Complete Testing Chargers
12.2.1(Mass of zinc coating (line wire))	-	600	Complete Testing Chargers
12.2.2(Mass of zinc coating (point wire))	-	600	Complete Testing Chargers
12.2(Uniformity of zinc coating)	-	600	Complete Testing Chargers
12.3(Ductility)	-	600	Complete Testing Chargers
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Chargers
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Chargers
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Chargers
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Chargers
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Chargers
Cl. 7.2(Cut Angle)	-	500	Complete Testing Chargers
Cl. 7.2(Length of Barbs)	-	500	Complete Testing Chargers
Cl. 7.2(Finishing of Barbs)	-	500	Complete Testing Chargers
Cl. 7.1(General)	-	500	Complete Testing Chargers
11(Sampling)	-	500	Complete Testing Chargers
13(Marking)	-	500	Complete Testing Chargers
8(CHROMATING)	-	500	Complete Testing Chargers
9.1(Freedom from defects)	-	500	Complete Testing Chargers
9.2(Freedom from defects)	-	500	Complete Testing Chargers
9.2(Freedom from defects)	-	500	Complete Testing Chargers
9.2(Freedom from defects)	-	500	Complete Testing Chargers
CL 05(Average dia of line wire (08))	-	500	-
CL 05(Average dia of point wire (08))	-	500	-
CL 05(Average Distance Between Two Barbs (08))	-	500	-

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	500	complete test charge.
Cl 15(Length, Width & Thickness)	-	500	complete test charge.
Cl 13(Y Groove Cracking Test)	-	1000	complete test charge.
Cl 12(Sudden Load Applied)	-	1000	complete test charge.
Cl 11.3(Press)	-	1000	complete test charge.
Cl 10.3(UTM)	-	1000	complete test charge.
Cl 7(Workmanship)	-	500	complete test charge.
Cl 18(Weight)	-	500	complete test charge.
Cl 15(Length, Width & Thickness)	-	500	complete test charge.
Cl 15(Length, Width & Thickness)	-	500	complete test charge.
Cl 13(Y Groove Cracking Test)	-	1000	complete test charge.
Cl 7(Workmanship)	-	500	complete test charge.
Cl 18(Weight)	-	500	complete test charge.
Cl 13(Y Groove Cracking Test)	-	1000	complete test charge.
Cl 12(Sudden Load Applied)	-	1000	complete test charge.
Cl 11.3(Press)	-	1000	complete test charge.
Cl 10.3(UTM)	-	1000	complete test charge.
Cl 7(Workmanship)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	500	complete test charge.
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	500	complete test charge.
Cl. 15(Cl. 15 Channel Section: Camber)	-	500	complete test charge.
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	500	complete test charge.
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	500	complete test charge.
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	500	complete test charge.
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	500	complete test charge.
Cl. 15(Cl. 15 Channel Section: Depth)	-	500	complete test charge.
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	500	complete test charge.
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	500	complete test charge.
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	500	complete test charge.
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	500	complete test charge.
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	500	complete test charge.
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	500	complete test charge.
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1000	complete test charge.
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1000	complete test charge.
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1000	complete test charge.
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	500	complete test charge.
4(MARKING)	-	500	complete test charge.
5(General Requirements)	-	500	complete test charge.
Clause 15, Table 4(Dimension)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	complete test charge.
Cl. 15, 16(Off Centre of Web)	-	500	complete test charge.
Cl. 15, 16(Flange out of square (I beam))	-	500	complete test charge.
Cl. 15, 16(Width of flange (I Beam))	-	500	complete test charge.
Cl. 15, 16(Depth (I Beam))	-	500	complete test charge.
Cl. 15, 16(Mass (Plate))	-	500	complete test charge.
Cl. 15, 16(Flange Slope)	-	500	complete test charge.
Cl. 15, 16(Web Thickness)	-	500	complete test charge.
Cl. 15, 16(Flange Thickness)	-	500	complete test charge.
Cl. 15, 16(Out of Square (Flat))	-	500	complete test charge.
Cl. 15, 16(Width )	-	500	complete test charge.
Cl. 15, 16(Thickness )	-	500	complete test charge.
Cl. 15, 16(Sectional Area )	-	500	complete test charge.
Cl. 15, 16(Camber (Angle))	-	500	complete test charge.
Cl. 15, 16(Out of Square (Angle))	-	500	complete test charge.
Cl. 15, 16(Weight)	-	500	complete test charge.
Cl. 15, 16(Leg Length Difference (Angle))	-	500	complete test charge.
Cl. 15, 16(Leg Length B (Angle))	-	500	complete test charge.
Cl. 15, 16(Leg Length A (Angle))	-	500	complete test charge.
Cl. 15, 16(Toe Radius R2)	-	500	complete test charge.
Cl. 15, 16(Root Radius R1)	-	500	complete test charge.
Cl 18(Weight)	-	500	complete test charge.
Cl 15(Length, Width & Thickness)	-	500	complete test charge.
Cl 13(Y Groove Cracking Test)	-	1000	complete test charge.
Cl 12(Sudden Load Applied)	-	1000	complete test charge.
Cl 11.3(Press)	-	1000	complete test charge.
Cl 10.3(UTM)	-	1000	complete test charge.
Cl 7(Workmanship)	-	500	complete test charge.
14.1(Soundness test)	-	1000	complete test charge.
14.2(Grain Size)	-	1000	complete test charge.
14.2(Inclusion)	-	1000	complete test charge.
Cl 7(Workmanship)	-	500	complete test charge.
Cl 10.3(UTM)	-	1000	complete test charge.
Cl 11.3(Press)	-	1000	complete test charge.
Cl 12(Sudden Load Applied)	-	1000	complete test charge.
Cl 13(Y Groove Cracking Test)	-	1000	complete test charge.
Cl 15(Length, Width & Thickness)	-	500	complete test charge.
Cl 18(Weight)	-	500	complete test charge.
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	500	complete test charge.
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	500	complete test charge.
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	500	complete test charge.
Clause 8, Table 1, Note 5(By Calculation)	-	500	complete test charge.
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	500	complete test charge.
Clause 8, Table 1, Note 6(By Calculation)	-	500	complete test charge.
Clause 7(IS 2062)	-	500	complete test charge.
Clause 11.3(IS 1599)	-	500	complete test charge.
Clause 12(IS 1757)	-	500	complete test charge.
Clause 15, Table 4(IS 2062)	-	500	complete test charge.
16(Tolerance)	-	500	complete test charge.
20(Marking)	-	500	complete test charge.
20(MARKING)	-	500	complete test charge.
8(Micro Alloying elements)	-	500	complete test charge.
8(Niobium as Nb)	-	500	complete test charge.
8(Vanadium as V)	-	500	complete test charge.
8(Titanium as Ti)	-	500	complete test charge.
10(Tensile Strength-IS:1608(P1)-22)	-	1000	complete test charge.
10(Yield Stress-IS:1608(P1)-22)	-	1000	complete test charge.
10(Elongation on SoA 5.65mm GL)	-	1000	complete test charge.
15(Mass -SOP MT-23)	-	500	complete test charge.
15(Sectional Area)	-	500	complete test charge.
15(Dimension -D)	-	500	complete test charge.
15(Dimension -B)	-	500	complete test charge.
15(Thickness - t)	-	500	complete test charge.
15(Thickness - T)	-	500	complete test charge.
15(Flange Slope)	-	500	complete test charge.
15(Radius R1)	-	500	complete test charge.
15(Radius R2)	-	500	complete test charge.
15(Mass -SOP MT-23)	-	500	complete test charge.
15(Sectional Area)	-	500	complete test charge.
15(Dimension -D)	-	500	complete test charge.
15(Dimension -B)	-	500	complete test charge.
15(Thickness - t)	-	500	complete test charge.
15(Thickness - T)	-	500	complete test charge.
15(Radius R1)	-	500	complete test charge.
15(Radius R2)	-	500	complete test charge.
15(Mass -SOP MT-23)	-	500	complete test charge.
15(Sectional Area)	-	500	complete test charge.
15(Dimensions AxB)	-	500	complete test charge.
15(Thickness - t)	-	500	complete test charge.
15(Radius -R1)	-	500	complete test charge.
15(Radius -R2)	-	500	complete test charge.
15(Diameter)	-	500	complete test charge.
15(Sectional Area)	-	500	complete test charge.
15(Mass per metre)	-	500	complete test charge.
15(Mass per metre)	-	500	complete test charge.
15(Ovality)	-	500	complete test charge.
15(Side Width)	-	500	complete test charge.
15(Sectional Area)	-	500	complete test charge.
15(Mass per metre)	-	500	complete test charge.
15(Out of Square)	-	500	complete test charge.
9(Preparation of test sample)	-	500	complete test charge.
Clause 8, Table 1, Note 2(Aluminium)	-	500	complete test charge.
Clause 8, Table 1, Note 5(Niobium)	-	500	complete test charge.
Clause 8, Table 1, Note 5(Titanium)	-	500	complete test charge.
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	500	complete test charge.
Clause 8, Table 1, Note 6(Boron)	-	500	complete test charge.
Clause 8, Table 1, Note 6(Cr+Ni)	-	500	complete test charge.
Clause 7(Freedom from Defect)	-	500	complete test charge.
Clause 11.3(Bend Test)	-	500	complete test charge.
Clause 12(Impact Test)	-	1000	complete test charge.
Cl 12(Sudden Load Applied)	-	1000	complete test charge.
Cl 11.3(Press)	-	1000	complete test charge.
Cl 10.3(UTM)	-	1000	complete test charge.
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	500	complete test charge.
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	500	complete test charge.

-
Exclusion : Cl.13 (Y-Groove crackability), Cl.14.1 (Soundness), Cl.14.2 (Grain Size), Cl.14.3 (Inclusion)

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	Complete Testing Chargers
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Complete Testing Chargers
Cl 8(Workmanship)	-	500	Complete Testing Chargers
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Complete Testing Chargers
Cl 8(Freedom from defects)	-	500	Complete Testing Chargers
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Complete Testing Chargers
6.1(Carbon %)	-	500	Complete Testing Chargers
6.1(Manganese %)	-	500	Complete Testing Chargers
6.1(Phosphorus %)	-	500	Complete Testing Chargers
6.1(Sulphur %)	-	500	Complete Testing Chargers
6.1(Silicon %)	-	500	Complete Testing Chargers
6.1( Aluminium %)	-	500	Complete Testing Chargers
6.1(Carbon %)	-	500	Complete Testing Chargers
6.1(Manganese %)	-	500	Complete Testing Chargers
6.1(Phosphorus %)	-	500	Complete Testing Chargers
6.1(Sulphur %)	-	500	Complete Testing Chargers
6.1(Silicon %)	-	500	Complete Testing Chargers
6.1( Aluminium %)	-	500	Complete Testing Chargers
6.1(Carbon %)	-	500	Complete Testing Chargers
6.1(Manganese %)	-	500	Complete Testing Chargers
6.1(Phosphorus %)	-	500	Complete Testing Chargers
6.1(Sulphur %)	-	500	Complete Testing Chargers
6.1(Silicon %)	-	500	Complete Testing Chargers
6.1( Aluminium %)	-	500	Complete Testing Chargers
Cl. 9(Out of Shape)	-	500	Complete Testing Chargers
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Complete Testing Chargers
Cl 8(Workmanship)	-	500	Complete Testing Chargers
Cl 8(Workmanship)	-	500	Complete Testing Chargers
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Complete Testing Chargers
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(By Calculation)	-	500	Complete Testing Chargers
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Chargers
Amendment 1(By Calculation)	-	500	Complete Testing Chargers
Table 1 Note 3(Copper)	-	500	Complete Testing Chargers
Amendment 1(Niobium)	-	500	Complete Testing Chargers
Amendment 1(Vanadium)	-	500	Complete Testing Chargers
Amendment 1(Titanium)	-	500	Complete Testing Chargers
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	500	Complete Testing Chargers
9.1(Diameter - SOP-MT-23)	-	500	Complete Testing Chargers
9.3(Out of Shape - SOP-MT-23)	-	500	Complete Testing Chargers
11(Marking)	-	500	Complete Testing Chargers
Table 1 Note 3(Copper)	-	500	Complete Testing Chargers
Amendment 1(Niobium)	-	500	Complete Testing Chargers
Amendment 1(Vanadium)	-	500	Complete Testing Chargers
Amendment 1(Titanium)	-	500	Complete Testing Chargers
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	500	Complete Testing Chargers
Cl 9("1.Outer dia (08) 2.Out of shape (08)")	-	500	-
Cl 9(Avarage Outer dia (08))	-	500	-
Cl 9(Maximum Out of shape (08))	-	500	-

-
-

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	Complete Testing Charge
Cl 9(Tensile Test On UTM)	-	1000	Complete Testing Charge
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	Complete Testing Charge
Cl 9(Tensile Test On UTM)	-	1000	Complete Testing Charge
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	Complete Testing Charge
Cl 9(Tensile Test On UTM)	-	1000	Complete Testing Charge
6 AND AS PER IS 7887(ALUMINIUM)	-	500	Complete Testing Charge
6 AND AS PER IS 7887(PHOSPHORUS)	-	500	Complete Testing Charge
6 AND AS PER IS 7887(SULPHUR)	-	500	Complete Testing Charge
6 AND AS PER IS 7887(MANGANESE)	-	500	Complete Testing Charge
6 AND AS PER IS 7887(SILICON)	-	500	Complete Testing Charge
6 AND AS PER IS 7887(CARBON)	-	500	Complete Testing Charge
7 & 8(Ovality)	-	500	Complete Testing Charge
7 & 8(Diameter)	-	500	Complete Testing Charge
9.2(Wrapping Test)	-	1000	Complete Testing Charge
11(Coating test)	-	500	Complete Testing Charge
Cl 9(Tensile Test On UTM)	-	1000	Complete Testing Charge
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	Complete Testing Charge
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	Complete Testing Charge
Cl 9(Tensile Test On UTM)	-	1000	Complete Testing Charge
Cl 11(Workmanship)	-	500	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	500	Complete Testing Charge
Clause 6 and Note 3 of IS 7887(Copper)	-	1000	Complete Testing Charge
15(Marking)	-	500	Complete Testing Charge
Clause 6 and Note 3 of IS 7887(Copper)	-	500	Complete Testing Charge
Cl 11(Workmanship)	-	500	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 11(Workmanship)	-	500	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 11(Workmanship)	-	500	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
6 AND AS PER IS 7887(MICRO ALLOY)	-	500	Complete Testing Charge
9.3(Bend test)	-	1000	Complete Testing Charge
13(Freedom from defects)	-	500	Complete Testing Charge
10(Finish)	-	500	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 11(Workmanship)	-	500	Complete Testing Charge
14(Packing)	-	500	Complete Testing Charge
CL 08(AVG Outer dia (08))	-	500	-
CL 08(MAX OVALITY (08))	-	500	-

-
-

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	500	Complete Testing Charge
Clause - 7.1(SULPHUR)	-	500	Complete Testing Charge
Clause - 7.1(PHOSPHURS)	-	500	Complete Testing Charge
Clause - 7.1(MANGANESE)	-	500	Complete Testing Charge
Clause - 7.1(NITROGEN)	-	500	Complete Testing Charge
Clause.7.1(Silicon)	-	500	Complete Testing Charge
Clause.7.1(Carbon Equbalant)	-	500	Complete Testing Charge
Clause.7.1(Microalloy element)	-	500	Complete Testing Charge
As per Clause 10(Dimension)	-	500	Complete Testing Charge
As per Clause 10.1(Dimension Width)	-	500	Complete Testing Charge
As per Clause 10.1(Dimension Thickness)	-	500	Complete Testing Charge
As per Clause 10.2(Dimension Length)	-	500	Complete Testing Charge
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	500	Complete Testing Charge
As per Clause 11.5(Bend)	-	500	Complete Testing Charge
As per Clause 11.6(Camber)	-	500	Complete Testing Charge
As per Clause 11.7 (i)(Out of Square)	-	500	Complete Testing Charge
As per Clause 11.7 (ii)(Round Corners)	-	500	Complete Testing Charge
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	500	Complete Testing Charge
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	500	Complete Testing Charge
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	500	Complete Testing Charge
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	500	Complete Testing Charge
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	500	Complete Testing Charge
As per Clause 11.7 (ix)(Scarfing pits)	-	500	Complete Testing Charge
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	500	Complete Testing Charge
Clause.6.0(Manufacture)	-	500	Complete Testing Charge
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	500	Complete Testing Charge
Clause. 13(Macro examination test.)	-	1000	Complete Testing Charge
Clause. 13(Macro examination test.)	-	1000	Complete Testing Charge
Clause. 13(Sulphur print.)	-	1500	Complete Testing Charge
Clause. 13(Inclusion content)	-	1000	Complete Testing Charge
Clause. 14(Marking)	-	500	Complete Testing Charge
Clause.15(Ordering information)	-	500	Complete Testing Charge

-
Exclusion: Cl.13 (Sulphur Print, Macro examination, Inclusion Content)

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	500	Complete Testing Charge
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	Complete Testing Charge
Cl. 10.2, Fig 1(Outside dimension (B))	-	500	Complete Testing Charge
Cl. 10.2, Fig 1(Outside dimension (H))	-	500	Complete Testing Charge
Cl. 10.2, Fig 1(Outside dimension (T))	-	500	Complete Testing Charge
Cl. 10.4, Fig 2(Concavity, X1)	-	500	Complete Testing Charge
Cl. 10.4, Fig 2(Convexity, X2)	-	500	Complete Testing Charge
Cl. 10.5, Fig 3(Squareness of side)	-	500	Complete Testing Charge
Cl. 10.6, Fig 4(External Corner Radius)	-	500	Complete Testing Charge
11(Oiling & Painting - IS 4923)	-	500	Complete Testing Charge
18.1(Height of the internal weld fin - IS 4923)	-	500	Complete Testing Charge
10.3(Thickness - IS 4923)	-	500	Complete Testing Charge
13(Marking)	-	500	Complete Testing Charge
Cl-19(Mechanical Tests)	-	1000	Complete Testing Charge
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	Complete Testing Charge
Cl. 10.7, Fig 5(Total twist, V)	-	500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	8500	Complete Testing Charge
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	500	Complete Testing Charge
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	Complete Testing Charge
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	Complete Testing Charge
Cl. 14.1(Exact Length)	-	500	Complete Testing Charge
Cl. 14.1(Random Length)	-	500	Complete Testing Charge
Cl. 14.1(Weight on individual length)	-	500	Complete Testing Charge
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	Complete Testing Charge
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	500	Complete Testing Charge
7(Micro Alloying elements(Nb+V+Ti))	-	500	Complete Testing Charge
7(Carbon equivalent as CE)	-	500	Complete Testing Charge
10.5(Squareness of corner/Sides-SOP MT-23)	-	500	Complete Testing Charge
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	500	Complete Testing Charge
10.4(Concavity/Convexity-SOP MT-23)	-	500	Complete Testing Charge

-
-

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

YST 210 / YST 240 / YST 310 / YST 355 / YST 420 / YST 460

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	Complete Testing Charge
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(COPPER)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(CARBON)	-	500	Complete Testing Charge
Clause - 5.1, Table-3( ALUMINIUM)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(SILICON)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(NITROGEN)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(MANGANESE)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(PHOSPHURS)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(SULPHUR)	-	500	Complete Testing Charge
Clause - 5.1, Table-3( CARBON)	-	500	Complete Testing Charge
9(Straightness)	-	500	Complete Testing Charge
10(Lengths)	-	500	Complete Testing Charge
Cl 11.3.1(Flattening test (over 50 mm NB))	-	1000	Complete Testing Charge
Cl. 11.2 Table 2(Elongation)	-	1000	Complete Testing Charge
Cl. 11.2 Table 2(Yield strength)	-	1000	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Surface external)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Weight)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Thickness)	-	500	Complete Testing Charge
Clause 11.2, Table -2(Elongation)	-	1000	Complete Testing Charge
Clause 11.2, Table -2(Yield Strength)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	Complete Testing Charge
8.0(Mass of Zinc coating - IS:6745)	-	500	Complete Testing Charge
8.0(Freedom from defects - IS 4736)	-	500	Complete Testing Charge
8.0(Uniformity of galvanized coating - IS 4736)	-	1000	Complete Testing Charge
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	Complete Testing Charge
13.0(Oiling and Painting - Visual)	-	500	Complete Testing Charge
12(Marking)	-	500	Complete Testing Charge
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	1000	Complete Testing Charge
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-

-
-

Bureau of Indian Standards

The National Standards Body of India

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

PLOT NO 7A, AVINASH LOGESTIC PARK, SKS ROAD, SILTARA INDUSTRIAL AREA, PHASE - 2, RAIPUR, Raipur, Chhattisgarh, 493221

9914663040 info@qipl.org

Scope List