BIS - LIMS (Laboratory Information Management System)

Akshat Test lab & Calibration services

A-2/49,G.D.Steel Compound ,Site-4,Industrial Area, Sahibabad, Ghaziabad,U.P,201010, GHAZIABAD, Ghaziabad, Uttar Pradesh, 201010

8700840187 akshattestlab@gmail.com

Scope List

Reset

51 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	2000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	3000	-
11.1(Starting)	-	2000	-
12(Interchangeability)	-	2000	-
13(Silent Operation)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	3000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	2000	-

Complete

06 Jun, 2024

IS 1169 (1967)

Specification for electric pedestal type fans and regulators (First Revision)

40400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18( Tolerances on rating)	-	2000	-
17(Performance Reqirement)	-	2000	-
16.14(Insulation-resistance )	-	2000	-
16.13(Flash Test)	-	2000	-
16.12(Measurement of Fan Speed)	-	1000	-
16.11(Electrical Input Test)	-	1000	-
16.1(Earthing Continuity Test)	-	1200	-
16.9(High Voltage)	-	1000	-
16.8(AC Leakage Test)	-	1000	-
16.7(Power Factor)	-	1000	-
16.6(Mechanical Endurance Test (for Regulators only))	-	1800	-
16.5(Cord grip test)	-	1000	-
16.4(Moisture Proofness Test (for Regulators only))	-	2300	-
16.3(Temperature-rise)	-	1200	-
16.2(Air Delivery Test)	-	2400	-
15(Marking)	-	800	-
14(Oscillating Mechanism)	-	2000	-
13(Silent Operation)	-	2000	-
12(Interchangeability)	-	2000	-
11(Starting)	-	500	-
10(Speed Regulators)	-	2000	-
9(Insulating Materials)	-	2000	-
8(Height of the Fan)	-	2000	-
7(Finish)	-	2000	-
6(Design and General Construction)	-	400	-
5(Rated Frequency)	-	400	-
4(Rated Voltage)	-	400	-
3(Sizes, Speed & Types)	-	500	-

Complete

06 Jun, 2024

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

15000 View breakup
Rs.15,000/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1 (b)(Marking)	-	1000	-
10.1(Starting )	-	500	-
11.1(Interchangeability)	-	500	-
14.2 & 15.1(Air Delivery)	-	1500	-
14.3.A(Temperature-Rise (for motors))	-	1000	-
14.4(Moistureproofness (for regulators only))	-	2000	-
14.1 & 14.6(Power factor)	-	1000	-
14.7(ac leakage)	-	1000	-
14.8(High voltage test)	-	1000	-
14.9(Insulation-Resistance)	-	1000	-
14.1(Earthing continuity)	-	1000	-
14.11 & 15.1(Electrical Input)	-	1000	-
14.12 & 16(Fan Speed)	-	0	-

Complete

06 Jun, 2024

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
9(Starting, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
19(Abnormal Operation, IS 302-1)	-	500	-
20(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21(Mechanical Strength, IS 302-1)	-	500	-
22.1(Construction)	-	1000	-
23(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27(Provision for Earthing, IS 302-1)	-	500	-
28(Screws & Connections, IS 302-1)	-	500	-
29(Clearances and Distances through Insulation, IS 302-1)	-	500	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	500	-

Complete

06 Jun, 2024

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	500	-
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-3, iii(Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	1000	-
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	1000	-
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	1000	-
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	1000	-
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	1000	-
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	1000	-
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	1000	-
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	1000	-
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	1000	-
10(Resistance to Heat -IS:3419)	-	1000	-
11(Resistance to Burning - IS 3419)	-	1000	-
12(Moisture Absorption - IS 3419)	-	1000	-
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	1000	-
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	1000	-
14.1(Copper Test - IS 3419)	-	1000	-
15, 15.3(Resistance to Oil - IS 3419)	-	1500	-
15,15.4(Resistance to Oil - IS 3419)	-	1500	-
16- Appendix-A(Resistance to Impact -IS 3419)	-	1000	-
17.2(Electric Strength - IS 3419)	-	1000	-
17.3(Insulation Resistance - IS 3419)	-	1000	-

Complete

06 Jun, 2024

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	1000	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	0	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	500	-
10.0(Measurement of Heating up time)	-	2000	-
11.0(Measurement of sole plate temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	2000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1500	-
16.0(Measurement of Thermostatic staibility)	-	1000	-

Complete

06 Jun, 2024

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
7.1(Marking- IS 302-1)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1500	-
31(Resistance of Rusting, IS 302-1)	-	1500	-

Complete

06 Jun, 2024

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.10 of IS 8978 : 1992(Finish)	-	3500	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	0	-
Cl.12 of IS 8978 : 1992(Endurance)	-	4500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	3500	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	500	-

Complete

06 Jun, 2024

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	2000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	1000	-
5(Rating)	-	0	-

Complete

06 Jun, 2024

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	1000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	1500	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	1500	-
Cl. 24 302-2-32 : 1994(Components)	-	1500	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	1500	-
Cl. 22 302-2-32 : 1994(Construction )	-	2000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	2000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	2500	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	2500	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	1000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	2000	-
Cl. 7 302-2-32 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	1000	-

Complete

06 Jun, 2024

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	1000	-
31(Resistance to Rusting)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connection)	-	2000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cables and Cords)	-	2000	-
24(Component)	-	1000	-
23(Internal wiring)	-	2000	-
22(Construction)	-	2000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	0	-
17(Overload Protection)	-	2000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	2000	-
15(Moisture Resistance)	-	2000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	0	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	2000	-
12(Operation under overload conditions of appliances with heating elements)	-	0	-
11(Temperature Rise/Heating)	-	2000	-
10(Input)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2000	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	1000	-
5(Rating)	-	0	-

Complete

06 Jun, 2024

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	1000	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	2000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-209 : 1994(Components)	-	2000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	1000	-
Cl. 22 302-2-209 : 1994(Construction )	-	2000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	2000	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	2000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	2000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	2000	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-209 : 1994(Marking)	-	1000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	1000	-

Complete

06 Jun, 2024

IS 302 : Part 2 : Sec 59 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 59 insect killers

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	1000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	1000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	1500	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	1500	-
Cl. 24 302-2-59 : 1999(Components)	-	1500	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	1500	-
Cl. 22 302-2-59 : 1999(Construction )	-	2000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	2000	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	2000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	2500	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	2500	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	1000	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-59 : 1999(Marking)	-	2000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	1000	-

Complete

06 Jun, 2024

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1500	-
10.4(Flammability test- Unaffected portion)	-	1000	-
10.4(Flammability test-Burning after flame removal)	-	1000	-
table 1 e) 3) (IR constant- max. Temp)	-	1000	-
table 1 e) 3) (IR constant- Room temp )	-	1000	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1000	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	1000	-
10.2(HV (room temperature))	-	1000	-
10.1(HV (water immersion))	-	2000	-
10.1(HV (water immersion))	-	2000	-
10.8(Smoke density rating)	-	2000	-
10.6(Halogen evolution)	-	2000	-
10.7(Temperature index)	-	1000	-
10.5(Oxygen index)	-	1000	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	500	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	500	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	500	-
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1000	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	1000	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1000	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1000	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1000	-
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1000	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	1000	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	500	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	500	-
8.3(Thickness of Sheath)	-	500	-
5.2(Application )	-	0	-
5.3(Thickness of Insulation)	-	500	-
9.1(Ovality)	-	500	-
9(Overall dimensions)	-	500	-
10.11(Per sulphate test (for tinned Cu cable only))	-	1000	-
4.2(Conductor resistance test)	-	200	-
4.1(Wrapping test (for Al))	-	200	-
4.1(Tensile test (for Al)- After Stranding)	-	500	-
4.1(Tensile test (for Al)-Before Stranding)	-	500	-
4.1(Annealing test (for copper))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	500	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	500	-
12(CONSTRUCTION Core Identification)	-	100	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.1(Conductor - Material)	-	0	-
4.1(Conductor - Material)	-	0	-
Table 1 iii) c) 3)(Elongation variation)	-	500	-
Table 1 iii) c) 3)(TS variation)	-	500	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	500	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	500	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	-

Complete

06 Jun, 2024

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	500	-
7.1.1(Accessories Classification)	-	500	-
7.3(Plug Classification)	-	500	-
8.1(MARKING)	-	500	-
9.1(CHECKING OF DIMENSIONS)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1000	-
11.1(PROVISIONS FOR EARTHING)	-	500	-
12.1.1(TERMINALS)	-	1500	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1000	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	500	-
15(INTERLOCKED SOCKET-OUTLETS)	-	500	-
16.1(RESISTANCE TO AGEING,)	-	1000	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1000	-
16.3(Resistance to Humidity)	-	1000	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
18(OPERATION OF EARTHING CONTACTS)	-	1000	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	500	-
21(NORMAL OPERATION)	-	500	-
22.1(Verification of the Maximum Withdrawal Force)	-	500	-
22.2(Verification of Minimum Withdrawal Force)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1000	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	1000	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1000	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	1000	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1000	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1000	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	1000	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1000	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	1000	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1000	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1000	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	1000	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	1000	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	1000	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1000	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1000	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1000	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1000	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	1000	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	1000	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	1000	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	1000	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	1000	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	1000	-
24.15(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	1000	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1000	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	1000	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	1000	-
25.4(RESISTANCE TO HEAT )	-	1000	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1000	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	1000	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	1000	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	0	-
29(RESISTANCE TO RUSTING)	-	500	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	500	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	500	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	500	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	500	-

Complete

06 Jun, 2024

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (mech)(Stranding)	-	0	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	2000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	2000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	2000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	2000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	-
13.7.2 (chem)(Mass of Zinc coating)	-	2000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	2000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.9 (elec)(Surface condition test)	-	0	-
13.10 (elec)(Ultimate breaking load)	-	2000	-
13.11 (elec)(Stress-strain test)	-	500	-

Complete

06 Jun, 2024

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	2000	-
12.3, Table-1(Breaking load before stranding)	-	2000	-
12.3, Table-1(Breaking load after stranding)	-	2000	-
12.4(Wrapping test)	-	1000	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	1000	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-

Complete

06 Jun, 2024

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	100	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	100	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	200	-
6.5(Size of messenger conductor )	-	200	-
6.6(Joints in messenger conductor )	-	200	-
6.6(Direction of outer layer)	-	100	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	100	-
7.5(Colour of the insulation )	-	100	-
8.1(Core identification)	-	100	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	100	-
9.2(Assembly (Laying up))	-	100	-
9.3(Direction of lay)	-	100	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	700	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	700	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	600	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	600	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	700	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	700	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	0	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	0	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	0	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	0	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	0	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	1000	-

Complete

06 Jun, 2024

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	1000	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	1000	-
6.3(Standard Mark on Conduit)	-	1000	-
7.1.1(Maximum and minimum outside diameter of socket)	-	2500	-
7.1.1 Table-2(Length of Socket end)	-	2500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	2500	-
7.2(Minimum inside diameter of conduit)	-	2500	-
7.3(Length of conduit)	-	2500	-
7.4(Unifomity of The wall Thickness)	-	2500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	2500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	2000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	-
10(Resistance to Heat -Ball presure test)	-	2500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	2500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-

Complete

06 Jun, 2024

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	250	-
9.1(Insulation Applied by extrusicn)	-	200	-
9.2(Thickness of Insulation - Average)	-	500	-
9.3(Thickness of Insulation - Minimum)	-	500	-
9.4(Application of Insulation)	-	200	-
10.1(Core Identification)	-	200	-
10.2(Core Identification- Neutral)	-	200	-
10.3(Core Identification by number )	-	200	-
10.4(Core Identification by number - Neutral )	-	200	-
11(LAVING UP OF CORES)	-	200	-
12.1 & 12.2(Inner sheath : Application)	-	200	-
12.3(Thickness of Inner Sheath)	-	500	-
13.1(Armouring: Application)	-	100	-
13.1.2(Armouring: Coverage )	-	100	-
13.1.3(Armouring: Direction of Lay )	-	100	-
13.2(Type of armour )	-	100	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(Armour: Joint)	-	200	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(Outer Sheath : Application)	-	200	-
14.2(Colour of outer sheath)	-	100	-
14.3(Thickness of outer sheath - AVERAGE)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	500	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	500	-
15.1 a) iii)(Wrapping test (for aluminium))	-	500	-
15.1 a) iv)(Resistance test - Main conductor)	-	500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	500	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	1000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	500	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	500	-
16.9(Oxygen Index Test)	-	1000	-
16.1(Flame Retardance Test on Single Cables)	-	2000	-
16.11(Flame Retardance Test on Bunched Cables)	-	2000	-
16.13(Test for Halogen Acid Gas Evolution)	-	2000	-
16.14(Temperature Index)	-	2000	-
17.1(Manufacturer'. identification)	-	100	-
17.2(cable Indentification )	-	100	-
17.3(cable Code )	-	0	-

Complete

06 Jun, 2024

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	200	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	500	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	500	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	200	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	200	-
6.1(MATERIALS : ARMGURING)	-	200	-
6.2(MATERIALS : ARMGURING)	-	200	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	200	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	200	-
8.1(CONSTRUCTION : CONDUCTOR)	-	200	-
8.2(CONSTRUCTION : CONDUCTOR)	-	200	-
9.1(INSULATION )	-	200	-
9.2(INSULATION : Thickness of Insulation)	-	200	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	200	-
9.4(INSULATION : Application of Insulation)	-	200	-
10.1(CORE IDENTIFICATION)	-	200	-
10.2(CORE IDENTIFICATION)	-	200	-
10.3(CORE IDENTIFICATION)	-	200	-
10.3.1(Arrangement of Marking)	-	200	-
11.1(LAYING UP OF CORES)	-	200	-
11.2(LAYING UP OF CORES)	-	200	-
12.1(INNER SHEATH)	-	500	-
12.2(INNER SHEATH)	-	500	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
13.1.1(ARMOURING : Application)	-	200	-
13.1.2(Armouring: Coverage )	-	200	-
13.1.3(ARMOURING : Direction of lay )	-	200	-
13.1.4(ARMOURING : Application)	-	200	-
13.2(ARMOURING : Type of Armour)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(OUTER SHEATH)	-	500	-
14.2(OUTER SHEATH)	-	500	-
14.3(OUTER SHEATH : Colour )	-	500	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	500	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	500	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	500	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	500	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	500	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	500	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	500	-
15.1 d)6)(Heat shock test- Insulation )	-	500	-
15.1 d)6)(Heat shock test- sheath )	-	500	-
15.1 d)7)(Thermal stability- insulation )	-	500	-
15.1 d)7)(Thermal stability- Sheath )	-	500	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	500	-
15.1 e)(Insulation resistance test : IR Constant )	-	500	-
15.1 f)(High voltage test ( water immersion test ))	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	-
16.1(DETAILS OF TESTS : General)	-	1000	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1000	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1000	-
16.4(Flammability Test)	-	500	-
16.5(Oxygen Index Test)	-	1000	-
16.6(Flame Retardance Test on Single Cables)	-	2000	-
16.7(Flame Retardance Test on Bunched Cables)	-	2000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2000	-
16.1(Temperature Index)	-	2000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	500	-
9.3(Minimum Thickness of Reduce core insulation)	-	250	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	250	-

Complete

06 Jun, 2024

Bureau of Indian Standards

The National Standards Body of India

Akshat Test lab & Calibration services

A-2/49,G.D.Steel Compound ,Site-4,Industrial Area, Sahibabad, Ghaziabad,U.P,201010, GHAZIABAD, Ghaziabad, Uttar Pradesh, 201010

8700840187 akshattestlab@gmail.com

Scope List