BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 781 Sonipat Haryana

781, HSIIDC Rai Industrial Estate, Sonipat, Sonipat, Haryana, 131029

9810562215 director@bharattesthouse.com

Scope List

Reset

85 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

1200 View breakup
For BIS Samples:1.5 times of BIS Testing charges, For Others:

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	5% discount for BIS
7.0(Marking and Instructions)	-	200	5% discount for BIS
8.0(Protection against access to live parts)	-	300	5% discount for BIS
10.0(Input and Current)	-	500	5% discount for BIS
11.0(Heating)	-	1000	5% discount for BIS
13.0(Leakage Current and electric strength at operating temperature)	-	300	5% discount for BIS
14.0(Transient Overvoltage)	-	500	5% discount for BIS
15.0(Moisture resistance)	-	1000	5% discount for BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	300	5% discount for BIS
17.0(Overload Protection of transformer and associated circuit)	-	400	5% discount for BIS
19.0(Abnormal Operation)	-	1000	5% discount for BIS
20.0(Stability and mechanical hazards)	-	300	5% discount for BIS
21.0(Mechanical Strength)	-	400	5% discount for BIS
22.0(Construction)	-	800	5% discount for BIS
23.0(Internal Wiring)	-	500	5% discount for BIS
25.0(Supply Connection and External Flexible Cords)	-	500	5% discount for BIS
26.0(Terminals for external conductors)	-	300	5% discount for BIS
27.0(Provision For Earthing)	-	500	5% discount for BIS
28.0(Screws and Connections)	-	400	5% discount for BIS
29.0(Creepage Distances and Clearances)	-	600	5% discount for BIS
30.0(Resistance To Heat and Fire)	-	1000	5% discount for BIS
31.0(Resistance To Rusting)	-	500	5% discount for BIS
24(Components)	-	500	5% discount for BIS
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	100	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020. EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5) Excluding cl.19.11.4.1 to 19.11.4.7_ EMI/EMC tests(Electrostatic Discharges, Radiant Fields, Fast Transient bursts, Voltage surges, Injected current, Voltage dips & Interruptions, Mains signals), Cl. 24.1.1,24.1.2,24.1.5_Components (Capacitors for radio interference suppression, isolating transformer, coupler)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

Stationary storage type electric water heaters

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification )	-	100	5% discount for BIS
6(Classification )	-	100	5% discount for BIS
7(Marking)	-	5	5% discount for BIS
7.1(Marking : Warning for Open- outlet )	-	5	5% discount for BIS
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	5	5% discount for BIS
7.1(Marking : Statement for a pressure-relief device)	-	5	5% discount for BIS
7.1(Marking : Rated capacity)	-	5	5% discount for BIS
7.1(Marking : Rated pressure)	-	5	5% discount for BIS
7.1(Marking : Country of manufacture)	-	5	5% discount for BIS
7.1(Marking: IP Number)	-	5	5% discount for BIS
7.1(Marking: Symbol for Class II)	-	5	5% discount for BIS
7.1(Marking: Model or type reference)	-	5	5% discount for BIS
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	5	5% discount for BIS
7.1(Marking : Rated power input)	-	5	5% discount for BIS
7.1(Marking : Symbol for nature of supply )	-	5	5% discount for BIS
7.1(Marking : Rated Voltage )	-	5	5% discount for BIS
7.6(Marking : Symbol used )	-	5	5% discount for BIS
7.8(Marking : Terminals )	-	5	5% discount for BIS
7.11(Marking : Indication of controls )	-	5	5% discount for BIS
7.13(Marking : Official language of Instruction )	-	5	5% discount for BIS
7.14(Marking : Legibility and durability)	-	5	5% discount for BIS
7.101(Marking : Indifiction of water inlet and water outlet )	-	5	5% discount for BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	300	5% discount for BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	300	5% discount for BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	225	5% discount for BIS
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	25	5% discount for BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	25	5% discount for BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	25	5% discount for BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	100	5% discount for BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	100	5% discount for BIS
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	100	5% discount for BIS
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	200	5% discount for BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	5% discount for BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	200	5% discount for BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	5% discount for BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	100	5% discount for BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	5% discount for BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	600	5% discount for BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	200	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	200	5% discount for BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	5% discount for BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	300	5% discount for BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	5% discount for BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	300	5% discount for BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	200	5% discount for BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	300	5% discount for BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	250	5% discount for BIS
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	150	5% discount for BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2350	5% discount for BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	500	5% discount for BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	200	5% discount for BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	400	5% discount for BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	300	5% discount for BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	300	5% discount for BIS
(Cl.22 of IS 2082:2018)(Finish)	-	300	5% discount for BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	150	5% discount for BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	150	5% discount for BIS
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	100	5% discount for BIS
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	100	5% discount for BIS
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	100	5% discount for BIS
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	20	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	100	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	50	5% discount for BIS
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	50	5% discount for BIS
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	20	5% discount for BIS
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	20	5% discount for BIS
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	20	5% discount for BIS
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	50	5% discount for BIS
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	25	5% discount for BIS
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	20	5% discount for BIS
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	50	5% discount for BIS
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	50	5% discount for BIS
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	20	5% discount for BIS
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	20	5% discount for BIS
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	10	5% discount for BIS
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	10	5% discount for BIS
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	20	5% discount for BIS
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	20	5% discount for BIS
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	20	5% discount for BIS
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	20	5% discount for BIS
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	25	5% discount for BIS
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	25	5% discount for BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	5	5% discount for BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	5	5% discount for BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	5	5% discount for BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	200	5% discount for BIS
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	10	5% discount for BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	5	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	5	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	5	5% discount for BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	5	5% discount for BIS
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	10	5% discount for BIS
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	10	5% discount for BIS
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	10	5% discount for BIS
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	5	5% discount for BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	50	5% discount for BIS
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	250	5% discount for BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	250	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	15	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	100	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	10	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	10	5% discount for BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	10	5% discount for BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	100	5% discount for BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	100	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	2	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	2	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	2	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	2	5% discount for BIS
(Cl.24ofIS302-221:2011)(Component)	-	2	5% discount for BIS
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	2	5% discount for BIS
Cl-10(Mounting of the water heater)	-	0	5% discount for BIS
Cl-11(Measurements of stored water temperature)	-	100	5% discount for BIS
12(THERMOSTAT SETTING)	-	100	5% discount for BIS
Cl-12(Thermostat setting)	-	100	5% discount for BIS
Cl-13(Measurement of energy consumption)	-	100	5% discount for BIS
Cl-14(Verification of the rated capacity)	-	150	5% discount for BIS

31 Dec, 2026

-
-

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

Line operated three phase AC motors

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(Earthing)	-	250	5% discount for BIS
9.0(Terminal Marking)	-	250	5% discount for BIS
9.0(Terminal Marking)	-	250	5% discount for BIS
11.0(DUTY AND RATING)	-	250	5% discount for BIS
11.0(DUTY AND RATING)	-	250	5% discount for BIS
15.2(Rating)	-	1750	5% discount for BIS
15.2(Rating)	-	1750	5% discount for BIS
16.1.1(Insulation Resistance Test)	-	750	5% discount for BIS
16.1.1(Insulation Resistance Test)	-	750	5% discount for BIS
16.1.2(Measurement of Resistance of Windings of Stator)	-	1250	5% discount for BIS
16.1.2(Measurement of Resistance of Windings of Stator)	-	1250	5% discount for BIS
16.1.3(No Load Test)	-	2000	5% discount for BIS
16.1.3(No Load Test)	-	2000	5% discount for BIS
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	1500	5% discount for BIS
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	1500	5% discount for BIS
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	2500	5% discount for BIS
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	2500	5% discount for BIS
16.1.6(High Voltage Test)	-	1250	5% discount for BIS
16.1.6(High Voltage Test)	-	1250	5% discount for BIS
16.2.1(Dimensions)	-	750	5% discount for BIS
16.2.1(Dimensions)	-	750	5% discount for BIS
16.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.2.1(Locked Rotor Test)	-	250	5% discount for BIS
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	250	5% discount for BIS
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	250	5% discount for BIS
16.2.2.3.1(Direct proportion method)	-	250	5% discount for BIS
16.2.2.3.1(Direct proportion method)	-	250	5% discount for BIS
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1500	5% discount for BIS
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1500	5% discount for BIS
16.2.4(Temperature Rise Test)	-	1250	5% discount for BIS
16.2.4(Temperature Rise Test)	-	1250	5% discount for BIS
16.2.5(Momentary Overload Test)	-	2500	5% discount for BIS
16.2.5(Momentary Overload Test)	-	2500	5% discount for BIS
16.3.1( Test for Vibration Severity of Motor)	-	750	5% discount for BIS
16.3.1( Test for Vibration Severity of Motor)	-	750	5% discount for BIS
16.3.2( Test for Noise Levels of Motor)	-	750	5% discount for BIS
16.3.2( Test for Noise Levels of Motor)	-	750	5% discount for BIS
16.3.3( Test for Degree of Protection by Enclosure)	-	3000	5% discount for BIS
16.3.3( Test for Degree of Protection by Enclosure)	-	3000	5% discount for BIS
16.3.4(Over Speed Test)	-	750	5% discount for BIS
16.3.4(Over Speed Test)	-	750	5% discount for BIS
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	1250	5% discount for BIS
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	1250	5% discount for BIS
18.3(BIS Certification Marking )	-	250	5% discount for BIS
18.3(Marking)	-	250	5% discount for BIS
15.3.2(Marking)	-	50	5% discount for BIS
15.3.2(Marking)	-	50	5% discount for BIS
12.2(Pull up torque)	-	800	5% discount for BIS
6(Method of cooling)	-	750	5% discount for BIS
Cl. 16.3.5(Temperature rise test at limiting values of voltage and frequnancy variation)	-	1250	5% discount for BIS
Cl. 16.3.4(Over Speed test)	-	750	5% discount for BIS
Cl. 16.3.3(Test for degree of protection by enclosure)	-	3000	5% discount for BIS
Cl. 16.3.2(Noise)	-	750	5% discount for BIS
Cl. 16.3.1(Vibration test)	-	750	5% discount for BIS
Cl. 11(Duty and Rating)	-	250	5% discount for BIS
Cl. 16.2.1(Dimensions)	-	750	5% discount for BIS
Cl. 16.1.6(High Voltage Test)	-	1250	5% discount for BIS
Cl. 16.1.1(Insulation Resistance test)	-	750	5% discount for BIS
Cl. 16.2.5(Momentary overload test)	-	2500	5% discount for BIS
Cl. 8(Earthing)	-	250	5% discount for BIS
Cl. 6(Method of cooling)	-	750	5% discount for BIS
Cl. 9(Terminal marking)	-	250	5% discount for BIS
Cl. 16.2.4(Temperature rise test )	-	1250	5% discount for BIS
Cl. 16.2.3(Full load test)	-	1500	5% discount for BIS
Cl. 12.2(Pull up test)	-	800	5% discount for BIS
Cl. 16.1.4 & 16.2.2(Locked rotor readings)	-	1500	5% discount for BIS
Cl. 16.1.5(Reduced voltage running test)	-	2500	5% discount for BIS
Cl. 16.1.3(No load at rated voltage)	-	2000	5% discount for BIS
Cl. 16.1.2(Measurment of stator resistance)	-	1250	5% discount for BIS
Cl. 18.3(BIS Certification Marking)	-	250	5% discount for BIS
Cl. 15.2(rating)	-	1750	5% discount for BIS
Cl. 18.2(Marking and labelling)	-	250	5% discount for BIS
Cl. 18.1(Marking and labelling)	-	250	5% discount for BIS
Cl-12.1(Momentary Excess Torque)	-	650	5% discount for BIS
Cl-12.2(Pull-up-Torque)	-	650	5% discount for BIS
Cl-12.3(Sustained Overloads)	-	650	5% discount for BIS
Cl-13(Temperature Rise)	-	2500	5% discount for BIS
Cl-14(Performance Values)	-	2000	5% discount for BIS
Cl-15(Efficiency)	-	1750	5% discount for BIS

31 Dec, 2026

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

Electric ceiling type fans and regulators

19500 View breakup
For BIS Samples:1.5 times of BIS Testing charges, For Others:

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	100	5% discount for bis
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	200	5% discount for bis
8.1,a(Marking )	-	200	5% discount for bis
8.1,b(Marking )	-	200	5% discount for bis
8.1,c(Marking )	-	200	5% discount for bis
8.1,d(Marking )	-	200	5% discount for bis
8.1,e(Marking )	-	200	5% discount for bis
8.1,f(Marking )	-	200	5% discount for bis
8.1,g(Marking )	-	200	5% discount for bis
8.2(Marking )	-	200	5% discount for bis
8.3,a(Marking )	-	200	5% discount for bis
8.3,b(Marking )	-	200	5% discount for bis
8.3,c(Marking )	-	200	5% discount for bis
8.3,d(Marking )	-	200	5% discount for bis
8.3,e(Marking )	-	200	5% discount for bis
8.4(Marking )	-	200	5% discount for bis
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	200	5% discount for bis
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	200	5% discount for bis
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	200	5% discount for bis
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	200	5% discount for bis
6.2(Rating)	-	100	5% discount for bis
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	300	5% discount for bis
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	300	5% discount for bis
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	300	5% discount for bis
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1200	5% discount for bis
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1200	5% discount for bis
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	5% discount for bis
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	5% discount for bis
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	300	5% discount for bis
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	800	5% discount for bis
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	300	5% discount for bis
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	300	5% discount for bis
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	300	5% discount for bis
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	100	5% discount for bis
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	100	5% discount for bis
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	300	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	800	5% discount for bis
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	300	5% discount for bis
10.1(Speed Regulators)	-	1000	5% discount for bis
10.2(Speed Regulators)	-	1000	5% discount for bis
10.2(Speed Regulators)	-	1000	5% discount for bis
10.3(Speed Regulators)	-	1000	5% discount for bis
10.4(Speed Regulators)	-	1000	5% discount for bis
10.5(Speed Regulators)	-	1000	5% discount for bis
10.6(Speed Regulators)	-	1000	5% discount for bis
10.7(Speed Regulators)	-	1000	5% discount for bis
10.7(Speed Regulators)	-	1000	5% discount for bis
10.8(Speed Regulators)	-	1000	5% discount for bis
11.1(Starting)	-	300	5% discount for bis
11.2(Starting)	-	300	5% discount for bis
12(Interchangeability)	-	200	5% discount for bis
13(Silent Operation)	-	300	5% discount for bis
14.3 & Table 1(Test for Air Performance)	-	400	5% discount for bis
14.3 & Table 1(Test for Air Performance)	-	400	5% discount for bis
14.4(Measurement of Speed of the Fan )	-	400	5% discount for bis
14.5(Measurement of Power factor and Power Input)	-	400	5% discount for bis
14.5(Measurement of Power factor and Power Input)	-	400	5% discount for bis
16(Endurance Test)	-	2000	5% discount for bis
16(Endurance Test)	-	2000	5% discount for bis
16(Endurance Test)	-	2000	5% discount for bis
16(Endurance Test)	-	2000	5% discount for bis
16(Endurance Test)	-	2000	5% discount for bis
17(Test for Harmonic Distortion)	-	500	5% discount for bis
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	50	5% discount for bis
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	50	5% discount for bis
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	5% discount for bis
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	5% discount for bis

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 1169 (1967)

Specification for electric pedestal type fans and regulators (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Sizes, Speed & Types)	-	500	5% discount for BIS
4(Rated Voltage)	-	50	5% discount for BIS
5(Rated Frequency)	-	50	5% discount for BIS
6(Design and General Construction)	-	550	5% discount for BIS
7(Finish)	-	100	5% discount for BIS
8(Height of the Fan)	-	200	5% discount for BIS
9(Insulating Materials)	-	600	5% discount for BIS
10(Speed Regulators)	-	2000	5% discount for BIS
11(Starting)	-	500	5% discount for BIS
12(Interchangeability)	-	200	5% discount for BIS
13(Silent Operation)	-	500	5% discount for BIS
14(Oscillating Mechanism)	-	500	5% discount for BIS
15(Marking)	-	250	5% discount for BIS
16.2(Air Delivery Test)	-	8000	5% discount for BIS
16.3(Temperature-rise)	-	8000	5% discount for BIS
16.4(Moisture Proofness Test (for Regulators only))	-	8000	5% discount for BIS
16.5(Cord grip test)	-	8000	5% discount for BIS
16.6(Mechanical Endurance Test (for Regulators only))	-	8000	5% discount for BIS
16.7(Power Factor)	-	8000	5% discount for BIS
16.8(AC Leakage Test)	-	8000	5% discount for BIS
16.9(High Voltage)	-	8000	5% discount for BIS
16.1(Earthing Continuity Test)	-	8000	5% discount for BIS
16.11(Electrical Input Test)	-	8000	5% discount for BIS
16.12(Measurement of Fan Speed)	-	8000	5% discount for BIS
16.13(Flash Test)	-	8000	5% discount for BIS
16.14(Insulation-resistance )	-	8000	5% discount for BIS
17(Performance Reqirement)	-	1	5% discount for BIS
18( Tolerances on rating)	-	1	5% discount for BIS

31 Dec, 2026

-
-

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	200	5% discount for BIS
13.1 (a)(Marking)	-	200	5% discount for BIS
13.1 (b)(Marking)	-	200	5% discount for BIS
13.1 (c)(Marking)	-	200	5% discount for BIS
13.1 (d)(Marking)	-	200	5% discount for BIS
13.1 (e)(Marking)	-	200	5% discount for BIS
13.1 (f)(Marking)	-	200	5% discount for BIS
13.1 (g)(Marking)	-	200	5% discount for BIS
13.1 (h)(Marking)	-	200	5% discount for BIS
13.1 (j)(Marking)	-	200	5% discount for BIS
13.2(Marking)	-	200	5% discount for BIS
13.4(Marking)	-	200	5% discount for BIS
3.1(Sizes )	-	300	5% discount for BIS
4.1(Rated Voltage)	-	50	5% discount for BIS
5.1(Rated frequency)	-	50	5% discount for BIS
6.1(Design and General Construction)	-	300	5% discount for BIS
6.3(Design and General Construction)	-	300	5% discount for BIS
6.4(Design and General Construction)	-	300	5% discount for BIS
6.5(Design and General Construction)	-	300	5% discount for BIS
6.6(Design and General Construction)	-	300	5% discount for BIS
6.7(Design and General Construction)	-	300	5% discount for BIS
6.9(Design and General Construction)	-	300	5% discount for BIS
6.11(Design and General Construction)	-	300	5% discount for BIS
6.12(Design and General Construction)	-	300	5% discount for BIS
10.1(Starting )	-	300	5% discount for BIS
11.1(Interchangeability)	-	200	5% discount for BIS
14.2 & 15.1(Air Delivery)	-	2000	5% discount for BIS
14.3(Temperature-Rise)	-	700	5% discount for BIS
14.4(Moistureproofness (for regulators only))	-	700	5% discount for BIS
14.5(Mechanical Endurance (for regulators only))	-	500	5% discount for BIS
14.1 & 14.6(Power factor)	-	200	5% discount for BIS
14.7(ac leakage)	-	300	5% discount for BIS
14.8(High voltage test)	-	300	5% discount for BIS
14.9(Insulation-Resistance)	-	300	5% discount for BIS
14.1(Earthing continuity)	-	1	5% discount for BIS
14.11 & 15.1(Electrical Input)	-	300	5% discount for BIS
14.12 & 16(Fan Speed)	-	300	5% discount for BIS
7.1(Design and General Construction)	-	100	5% discount for BIS
8.1(Design and General Construction)	-	100	5% discount for BIS
9(Design and General Construction)	-	200	5% discount for BIS
12(Silent Operation)	-	300	5% discount for BIS
Cl-16(Tolerances on ratings)	-	200	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021.

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

14750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Size, Speed and Types)	-	300	5% discount for BIS
4.0(Rated Voltages)	-	100	5% discount for BIS
5.0(Rated Frequency)	-	100	5% discount for BIS
6.0(Design and General Construction)	-	750	5% discount for BIS
7.8(Speed Regulators)	-	3000	5% discount for BIS
7.9(Interchangeability)	-	3000	5% discount for BIS
7.11(Oscillating Mechanism)	-	3000	5% discount for BIS
9.0(Marking)	-	300	5% discount for BIS
10.3(Air Delivery Test)	-	7000	5% discount for BIS
10.4(Temperature-Rise Test)	-	7000	5% discount for BIS
10.5(Leakage Current)	-	7000	5% discount for BIS
10.6(High Voltage Test)	-	7000	5% discount for BIS
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	7000	5% discount for BIS
10.8(Construction)	-	7000	5% discount for BIS
10.9(Fan Speed and Input)	-	7000	5% discount for BIS
10.1(Earthing Connection)	-	7000	5% discount for BIS
10.11(Protection against Electric Shock)	-	7000	5% discount for BIS
10.12(Moisture Resistance Test)	-	7000	5% discount for BIS
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	7000	5% discount for BIS
10.14(Cord Grip Test)	-	7000	5% discount for BIS
10.16(Creepage Distances and Clearances)	-	7000	5% discount for BIS
7.1(Protection Against Electric Shock)	-	100	5% discount for BIS
7.2(Electrical Insulation Under Normal Operating Conditions)	-	100	5% discount for BIS
7.3(Temperature-rise)	-	100	5% discount for BIS
7.5(Creepage Distances and Clearances)	-	100	5% discount for BIS
7.6(Finish)	-	50	5% discount for BIS
7.7(Insulating Materials)	-	100	5% discount for BIS
7.10(Oscillating Mechanism)	-	50	5% discount for BIS
8.1, 8.2(Air delivery and service value)	-	500	5% discount for BIS

31 Dec, 2026

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

Electric food - Mixers (Liquidizers And Grinders)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	5% discount for BIS
6(Classification- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.2(Marking)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.1(Marking- IS 302-1)	-	200	5% discount for BIS
7.4(Marking)	-	200	5% discount for BIS
7.5(Marking)	-	200	5% discount for BIS
7.6(Marking)	-	200	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	300	5% discount for BIS
9(Starting, IS 302-1)	-	300	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	300	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	300	5% discount for BIS
14(Transient Over Voltages, IS 302-1)	-	500	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	1000	5% discount for BIS
15.2(Moisture Resistance-Spillage test)	-	1000	5% discount for BIS
15(Moisture Resistance, IS 302-1)	-	1000	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	300	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	300	5% discount for BIS
19(Abnormal Operation, IS 302-1)	-	1000	5% discount for BIS
19(Abnormal Operation, IS 302-1)	-	1000	5% discount for BIS
19(Abnormal Operation, IS 302-1)	-	1000	5% discount for BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	300	5% discount for BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	300	5% discount for BIS
21(Mechanical Strength, IS 302-1)	-	300	5% discount for BIS
21(Mechanical Strength, IS 302-1)	-	300	5% discount for BIS
22.1(Construction, IS 302-1)	-	800	5% discount for BIS
22.2(Construction)	-	800	5% discount for BIS
22.3(Construction)	-	800	5% discount for BIS
22.4(Construction)	-	800	5% discount for BIS
22.5(Construction)	-	800	5% discount for BIS
22.6(Construction)	-	800	5% discount for BIS
22.8(Construction)	-	800	5% discount for BIS
22.9(Construction)	-	800	5% discount for BIS
22.1(Construction)	-	800	5% discount for BIS
23(Internal Wiring, IS 302-1)	-	300	5% discount for BIS
24.1(Components, IS 302-1)	-	100	5% discount for BIS
24.2(Components)	-	100	5% discount for BIS
24.4(Components)	-	100	5% discount for BIS
24.5(Components)	-	100	5% discount for BIS
24.6(Components)	-	100	5% discount for BIS
24.7(Components)	-	100	5% discount for BIS
24.8(Components)	-	100	5% discount for BIS
24.9(Components)	-	100	5% discount for BIS
Cl.24(Components)	-	100	5% discount for BIS
Cl.22(Construction)	-	800	5% discount for BIS
Cl.23(Internal wiring)	-	300	5% discount for BIS
Cl.25(Supply connection and external flexible cords)	-	400	5% discount for BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	400	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	300	5% discount for BIS
27(Provision for Earthing, IS 302-1)	-	300	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	300	5% discount for BIS
29(Clearances and Distances through Insulation, IS 302-1)	-	500	5% discount for BIS
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	500	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	1	5% discount for BIS
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	1500	5% discount for BIS
34.3(Whisking egg whites )	-	1500	5% discount for BIS
34.4(IDLI batter-Grinding of black gram)	-	1500	5% discount for BIS
34.4(IDLI batter-Grinding of rice)	-	1500	5% discount for BIS
34.5.1 (a)(Operational test for juicers )	-	1500	5% discount for BIS
34.5.1 (b)(Operational test for juicers )	-	1500	5% discount for BIS
34.5.2(Operational test for juicers )	-	1500	5% discount for BIS
35(Temperature withstand test for bowl)	-	400	5% discount for BIS
36(Test for controls )	-	400	5% discount for BIS
37(Strength of Assembly )	-	200	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. IP Test included w.e.f. 27.02.2019. EXCLUSIONS: EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7)

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

98000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Lamp Dimensions )	-	200	5% discount for BIS
4.2(Glass Bulb)	-	200	5% discount for BIS
4.3.1(Caps)	-	50	5% discount for BIS
4.3.2(Caps)	-	50	5% discount for BIS
4.3.3(Caps)	-	50	5% discount for BIS
4.3.4(Caps : Insulation Resistance)	-	50	5% discount for BIS
5.1(MARKING : Mark of origin)	-	60	5% discount for BIS
5.1(MARKING : Rated wattage; )	-	60	5% discount for BIS
5.1(MARKING : Country of manufacture; )	-	60	5% discount for BIS
5.1(MARKING : Lamp designation )	-	60	5% discount for BIS
5.1(MARKING : Rated voltage or voltage range. )	-	60	5% discount for BIS
5.1.1(MARKING)	-	60	5% discount for BIS
6(LAMP CAPS )	-	700	5% discount for BIS
7.2.1(Lamp Starting Test : Lamp with External Starter)	-	3000	5% discount for BIS
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	3000	5% discount for BIS
7.3.1(Lamp Worm-Up Test)	-	3000	5% discount for BIS
7.3.2(Lamp Worm-Up Test)	-	3000	5% discount for BIS
7.4.1(Lamp Electrical Characteristics : Ageing)	-	3000	5% discount for BIS
7.4.2(Lamp Electrical Characteristics : Ageing)	-	3000	5% discount for BIS
8.1(Open Circuit Voltage)	-	5000	5% discount for BIS
8.2.1(Starting Pulse Characteristics )	-	1250	5% discount for BIS
8.2.2(Starting Pulse Characteristics )	-	1250	5% discount for BIS
8.2.3(Starting Pulse Characteristics )	-	1250	5% discount for BIS
8.2.4.1(Starting Pulse Characteristics : General guidance)	-	420	5% discount for BIS
8.2.4.3(Starting Pulse Characteristics : General guidance)	-	420	5% discount for BIS
8.3(Lamp Warm-Up Current )	-	5000	5% discount for BIS
8.4(Current Crest Factor )	-	5000	5% discount for BIS
9.1(Voltage Increase at Lamp Terminals)	-	8330	5% discount for BIS
9.2(Lamp Envelope Temperatures )	-	8330	5% discount for BIS
9.3(Permissible Cap Temperatures )	-	8340	5% discount for BIS
10.1(5 000 hours operation, )	-	11000	5% discount for BIS
10.2(Life Test)	-	11000	5% discount for BIS
10.2.1(Switching ‘on’ and switching ‘off’ during life test)	-	11000	5% discount for BIS
11.1( General Conditions )	-	50	5% discount for BIS
11.2(Mechanical, Physical and Marking Requirements )	-	50	5% discount for BIS
11.3.1( Lamp Starting, Warm-up and Electrical Characteristica )	-	50	5% discount for BIS
11.4(Lumen Maintenmce)	-	50	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. For Lamps with or without internal starters operating on 250V

IS 1709 (1984)

Specification for capacitors or electric fan motors (First Revision)

96000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Rated Voltage)	-	1	5% discount for BIS
4.2(Rated Frequency)	-	1	5% discount for BIS
4.2(Ambient Air Temp.)	-	1	5% discount for BIS
4.2(Capacitance)	-	1	5% discount for BIS
4.2(Capacitor)	-	1	5% discount for BIS
Cl. 5.1(Capacitor)	-	500	5% discount for BIS
Cl. 5.2(Capacitor)	-	500	5% discount for BIS
Cl. 5.3(Capacitor)	-	500	5% discount for BIS
Cl. 5.4(Capacitor)	-	500	5% discount for BIS
Cl 5.5(Capacitor)	-	500	5% discount for BIS
Cl. 5.6(Capacitor)	-	500	5% discount for BIS
Cl. 5.7(Capacitor)	-	500	5% discount for BIS
a(ISS 1709 : 1984)	-	1	5% discount for BIS
b(Manufacturers name or trade-mark and Serial number)	-	1	5% discount for BIS
c(Rated Voltage)	-	1	5% discount for BIS
d(Rated frequency)	-	1	5% discount for BIS
e(Rated Capacitance)	-	1	5% discount for BIS
f(Rated anbient Temperature)	-	1	5% discount for BIS
Cl. 6.2(Product may also be marked with standard mark.)	-	400	5% discount for BIS
Cl. 7.2(The capcitors shall be visually examined for finish and marking)	-	200	5% discount for BIS
Cl. 7.3.1(Insualtion Resistance between terminal and container)	-	1000	5% discount for BIS
Cl. 7.3.2(Insulation Resistance between terminals)	-	1000	5% discount for BIS
Cl. 7.4.1(Capacitors shall be subjected to an ac voltage test as specified in Table 2.)	-	2000	5% discount for BIS
Cl. 7.4.2(Capacitors shall be subjected for 10sec to a test between terminals and metal foil wrapped tightly around the surface of the container with s sinusoidal test voltages. Test Voltage:2000Vrms for 10sec During the test, no dielectric breakdown or flashover shall occur. )	-	2000	5% discount for BIS
Cl. 7.5(Capacitance measured at rated frequency and rated voltage.)	-	3000	5% discount for BIS
Cl.7.6(Tangent of Loss Angle measured at rated frequency and rated voltage. The maximum value of the tangent of loss angle for Self-healing MPP Type.)	-	2000	5% discount for BIS
Cl. 7.7(A weight of 2kg shall be suspended freely from each one of them in turn for a period of 10 sec. There shall be no damage to the capacitor or termination after this loading.)	-	1500	5% discount for BIS
Cl 7.8(Each termination shall withstand two consecutive bends as specified without damage to the capacitors)	-	1500	5% discount for BIS
Cl 7.9(Soldering tags shall withstand two consecutive cycles of bending as specified without damage to the capacitors.)	-	1500	5% discount for BIS
Cl. 7.10(There shall be no damage to the capacitors when the torque is applied to the nuts and screws of threaded terminations:)	-	1500	5% discount for BIS
Cl. 7.11(The capacitor shall be not suffer any damage when the specified soldering iron is applied to the termination of 15 sec.)	-	3000	5% discount for BIS
Cl. 7.12(Unenergized capacitor units kept in a position most likely to reveal leakage and heated throughout so that all parts of the container reach the temperature 5ºC higher the maximum operating temperature value. Total heating and cooling cycle time shall be 8 hours. After the sealing test No leakage shall occure.)	-	5000	5% discount for BIS
Cl. 7.13(Capacitance)	-	10000	5% discount for BIS
Cl. 7.13(Change in capacitance at 70°C as compare to 27°C. (Limit: 5%Max.) )	-	10000	5% discount for BIS
Cl. 7.13(Change in capacitance at 0°C as compare to 27°C. (Limit: 3%Max.) )	-	10000	5% discount for BIS
Cl. 7.14.1(Before test capacitance shall be measured. Th capacitor shall be subjected for 10 seconds to an ac voltage of 1.5 ti9mes the rated voltage. If rewer than five breakdown occure during the time, The voltage shall be increased slowly until five breakdown occured until voltage occured 3.5 times the rated voltage. voltage reduced to 0.8 times, no breakdown is permitted after decreased of voltage.)	-	15000	5% discount for BIS
Cl. 7.14.2(If only one or no breakdown has occurred since begning of the test when voltage has reached 3.5 times the rated voltage, the test shall be repeated on aonther identical capacitor.)	-	15000	5% discount for BIS
Cl.7.14.3(Before and after the test,the cpacitance shall be measured, A chage not greater than 0.3 %in its value shall be allowec.)	-	15000	5% discount for BIS
Cl. 7.15(After the test Capcitance variation)	-	15000	5% discount for BIS
Cl. 7.16(The capacitors are mounted in a air circulated test chamber as specified and capacitors are energized at test voltage 1.25UN for 500hr Continuously at 50Hz. During the test no permanent breskdown,intertuption or flashover shall occure.)	-	20000	5% discount for BIS
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and then capacitance shall be measured.)	-	20000	5% discount for BIS
Cl. 7.16(Change in capacitance, (Limit: 5%Max.) )	-	20000	5% discount for BIS
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and the tangent of loss angle shall be then measured. )	-	20000	5% discount for BIS
Cl. 7.16(Change in Tangent of Loss angle, (Limit: ----) )	-	20000	5% discount for BIS
Cl. 7.17(The capacitor sample was mounted in a circulating air oven maintained at a temperature 10ºC above the maximum operating temperature as specified without energizing. Capacitor energized at 1.4 times rated voltage by applying test voltage between terminal for 1 h, then 1.6 times rated voltage for 1 h, then 1.8 times rated voltage for 1 h, then 2.0 times rated voltage for 1 h then switch off. Then 2.0 times the rated voltage for an 8 h period each in four cycles of 24h. After completion of the test, the capacito is consider to have passe destruction test if a) Current through it has not been interruped by the delayed action test circuit fuse or by any internal fuse. b) The currnt through it has been interrputed without any harmful effect occurring. c)Three delayed action test ciucuit fuse have cleared without any hamfu effect occurring.d) The endurance is entact at the end of test e) The test voltage between terminals and container is passed at the end of the test.)	-	12000	5% discount for BIS

31 Dec, 2026

-
-

IS 5790 (1985)

Specification for domestic electric cooking ovens (First Revision)

Domestic electric cooking ovens

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	250	5% discount for BIS
6(Classification)	-	250	5% discount for BIS
7(Marking)	-	500	5% discount for BIS
8(Protection against Access to Live Parts)	-	1500	5% discount for BIS
9(Starting Of Motor Operated Appliances)	-	1	5% discount for BIS
10(Power Input & Current)	-	3000	5% discount for BIS
11(Temperature Rise/ Heating)	-	4000	5% discount for BIS
12(Operation under overload condition of appliances with heating element)	-	3000	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature)	-	1500	5% discount for BIS
14(Radio and Television Interference Suppressions/ Transient Over Voltage)	-	2500	5% discount for BIS
15(Moisture Resistance)	-	3000	5% discount for BIS
16(Insulation Resistance and Electric Strength (After Humidity Treatment)/ Leakage Current and Electric Strength)	-	1500	5% discount for BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1500	5% discount for BIS
18(Endurance)	-	8000	5% discount for BIS
19(Abnormal Operation)	-	4000	5% discount for BIS
20(Stability & Mechanical Hazards)	-	2000	5% discount for BIS
21(Mechanical strength)	-	2500	5% discount for BIS
22(Construction)	-	2000	5% discount for BIS
23(Internal wiring)	-	1500	5% discount for BIS
24(Components)	-	500	5% discount for BIS
25(Supply Connection & External Flexible Cords)	-	1500	5% discount for BIS
26(Terminals For External Conductors)	-	1000	5% discount for BIS
27(Provision For Earthing)	-	1500	5% discount for BIS
28(Screws & Connections)	-	1500	5% discount for BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1500	5% discount for BIS
30(Resistance to Heat & Fire)	-	3500	5% discount for BIS
31(Resistance to Rusting)	-	3000	5% discount for BIS
32(Radiation ,Toxicity and similar hazards)	-	4000	5% discount for BIS
33(Finish)	-	500	5% discount for BIS
101(Heating Up Time)	-	4000	5% discount for BIS
102(Heat Losses)	-	4500	5% discount for BIS
103(Uniformity of Temperature)	-	4500	5% discount for BIS
104(Thermostat setting and differential (For automatic ovens only))	-	4000	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020. Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

23000 View breakup
Rs.14,000/-without Storage

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
2.1.1(Type and Desiganation)	-	200	5% discount for BIS
2.1.2(Type and Desiganation)	-	200	5% discount for BIS
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	5% discount for BIS
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	1000	5% discount for BIS
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Appearance)	-	1	5% discount for BIS
3.1(Freedom from defects)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
3.1(Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-	1	5% discount for BIS
2.1.1(Type and Desiganation)	-	200	5% discount for BIS
2.1.2(Type and Desiganation)	-	200	5% discount for BIS
4.1(Performance Requirments)	-	1	5% discount for BIS
4.2(Performance Requirments)	-	1	5% discount for BIS
4.3(Performance Requirments)	-	1	5% discount for BIS
4.4(Performance Requirments)	-	1	5% discount for BIS
4.5(Performance Requirments)	-	1	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1400	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1400	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1400	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1400	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.8(Stability to accelerated ageing )	-	9500	5% discount for BIS
4.9(Insulation resistance test)	-	500	5% discount for BIS
4.1(Performance Requirments)	-	1	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1500	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1500	5% discount for BIS
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	1500	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.7(Electrolytic corrosion)	-	1800	5% discount for BIS
4.8(Stability to accelerated ageing )	-	9500	5% discount for BIS
3.1(Marking)	-	10	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021.For general purpose type and low pressure type

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	100	5% discount for BIS
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	100	5% discount for BIS
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	100	5% discount for BIS
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	100	5% discount for BIS
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	300	5% discount for BIS
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	300	5% discount for BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	600	5% discount for BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	600	5% discount for BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	600	5% discount for BIS
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	600	5% discount for BIS
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	200	5% discount for BIS
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	200	5% discount for BIS
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	200	5% discount for BIS
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	600	5% discount for BIS
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	600	5% discount for BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	500	5% discount for BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	500	5% discount for BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	500	5% discount for BIS
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	500	5% discount for BIS
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	400	5% discount for BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	400	5% discount for BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	400	5% discount for BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	400	5% discount for BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	400	5% discount for BIS
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	400	5% discount for BIS
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	100	5% discount for BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	200	5% discount for BIS
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	200	5% discount for BIS
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	200	5% discount for BIS
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	200	5% discount for BIS
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	400	5% discount for BIS
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	400	5% discount for BIS
10.0(Measurement of Heating up time)	-	300	5% discount for BIS
10.0(Measurement of Heating up time)	-	300	5% discount for BIS
11.0(Measurement of sole plate temperature)	-	300	5% discount for BIS
11.0(Measurement of sole plate temperature)	-	300	5% discount for BIS
11.0(Measurement of sole plate temperature)	-	300	5% discount for BIS
11.0(Measurement of sole plate temperature)	-	300	5% discount for BIS
12.0(Measurement of Tempearture Distribution)	-	300	5% discount for BIS
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	300	5% discount for BIS
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	300	5% discount for BIS
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	300	5% discount for BIS
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
16.0(Measurement of Thermostatic staibility)	-	300	5% discount for BIS
6(Measurement of Thermostatic staibility)	-	100	5% discount for BIS
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	500	5% discount for BIS
17(Measurement of Thermostatic staibility)	-	500	5% discount for BIS
16 of IS 302-2-3(Leakage current electric strength)	-	450	5% discount for BIS
4(GENERAL REQUIREMENTS)	-	10	5% discount for BIS
5(GENERAL NOTES ON TESTS)	-	10	5% discount for BIS
8(Marking)	-	100	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021.

IS 2994 (1992)

Electric stoves - Specification (Second Revision)

Electric stoves

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	200	5% discount for BIS
7(Classification)	-	200	5% discount for BIS
8(Marking)	-	500	5% discount for BIS
9(Safety Requirements)	-	1	5% discount for BIS
10(Endurance Test)	-	5000	5% discount for BIS
11(Finish)	-	1000	5% discount for BIS
12(Thermal Efficiency)	-	4000	5% discount for BIS
Cl-9 (Cl-8 of IS 302-2-202)(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	5% discount for BIS
Cl-9 (Cl-10 of IS 302-2-202)(INPUT AND CURRENT)	-	650	5% discount for BIS
Cl-9 (Cl-11 of IS 302-2-202)(TEMPERATURE RISE)	-	800	5% discount for BIS
Cl-9 (Cl-12 of IS 302-2-202)(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	5% discount for BIS
Cl-9 (Cl-13 of IS 302-2-202)(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	750	5% discount for BIS
Cl-9 (Cl-15 of IS 302-2-202)(MOISTURE RESISTANCE)	-	2000	5% discount for BIS
Cl-9 (Cl-16 of IS 302-2-202)(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	650	5% discount for BIS
Cl-9 (Cl-19 of IS 302-2-202)(ABNORMAL OPERATION)	-	1800	5% discount for BIS
Cl-9 (Cl-20 of IS 302-2-202)(STABILITY AND MECHANICAL HAZARDS)	-	1050	5% discount for BIS
Cl-9 (Cl-21 of IS 302-2-202)(MECHANICAL STRENGTH)	-	1150	5% discount for BIS
Cl-9 (Cl-22 of IS 302-2-202)(CONSTRUCTION)	-	750	5% discount for BIS
Cl-9 (Cl-23 of IS 302-2-202)(INTERNAL WIRING)	-	800	5% discount for BIS
Cl-9 (Cl-25 of IS 302-2-202)(SUPPLY CONNECTIONS AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	800	5% discount for BIS
Cl-9 (Cl-26 of IS 302-2-202)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	200	5% discount for BIS
Cl-9 (Cl-27 of IS 302-2-202)(PROVISIONS FOR EARTHING)	-	200	5% discount for BIS
Cl-9 (Cl-28 of IS 302-2-202)(SCREWS AND CONNECTIONS)	-	200	5% discount for BIS
Cl-9 (Cl-29 of IS 302-2-202)(CREEPAGE DISTANCES AND CLEARANCES)	-	400	5% discount for BIS
Cl-9 (Cl-30 of IS 302-2-202)(RESISTANCE TO HEAT FIRE AND TRACKING)	-	800	5% discount for BIS
Cl-9 (Cl-31 of IS 302-2-202)(RESISTANCE TO RUSTING)	-	1000	5% discount for BIS

31 Dec, 2026

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

Electric kettles and jugs

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	50	-
7(Classification)	-	50	-
8(Marking and Instruction)	-	50	-
9(Safety Requirements)	-	0	-
11(Overall Dimensions)	-	100	-
12(Mass)	-	100	-
13(Water Capacity)	-	500	-
14(Time to boil one litre of water)	-	500	-
15(Time to boil water capacity)	-	500	-
16(Minimum quantity of water that can be boiled)	-	500	-
17(Temperature of supporting surface)	-	500	-
18(Thermal Efficiency)	-	1000	-
19(Endurance)	-	2500	-
20(Finish)	-	500	-
Cl-9 (Cl-8 of IS 302-2-15)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	50	-
Cl-9 (Cl-10 of IS 302-2-15)(POWER INPUT AND CURRENT)	-	50	-
Cl-9 (Cl-11 of IS 302-2-15)(HEATING)	-	500	-
Cl-9 (Cl-13 of IS 302-2-15)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	200	-
Cl-9 (Cl-14 of IS 302-2-15)(TRANSIENT OVER VOLTAGES)	-	350	-
Cl-9 (Cl-15 of IS 302-2-15)(MOISTURE RESISTANCE)	-	500	-
Cl-9 (Cl-16 of IS 302-2-15)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	250	-
Cl-9 (Cl-17 of IS 302-2-15)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	50	-
Cl-9 (Cl-19 of IS 302-2-15)(ABNORMAL OPERATION)	-	0	-
Cl-9 (Cl-20 of IS 302-2-15)(STABILITY AND MECHANICAL HAZARDS)	-	300	-
Cl-9 (Cl-21 of IS 302-2-15)(MECHANICAL STRENGTH)	-	300	-
Cl-9 (Cl-22 of IS 302-2-15)(CONSTRUCTION)	-	200	-
Cl-9 (Cl-23 of IS 302-2-15)(INTERNAL WIRING)	-	350	-
Cl-9 (Cl-25 of IS 302-2-15)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	300	-
Cl-9 (Cl-26 of IS 302-2-15)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
Cl-9 (Cl-27 of IS 302-2-15)(PROVISION FOR EARTHING)	-	500	-
Cl-9 (Cl-28 of IS 302-2-15)(SCREWS AND CONNECTIONS)	-	500	-
Cl-9 (Cl-29 of IS 302-2-15)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
Cl-9 (Cl-30 of IS 302-2-15)(RESISTANCE TO HEAT AND FIRE)	-	1250	-
Cl-9 (Cl-31 of IS 302-2-15)(RESISTANCE TO RUSTING)	-	500	-
Cl-9 (Cl-32 of IS 302-2-15)(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-

31 Dec, 2026

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

Electrical shavers hair, clippers and similar appliance

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	100	5% discount for BIS
6(Classification)	-	100	5% discount for BIS
7(Marking/ Marking & Instructions)	-	500	5% discount for BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	5% discount for BIS
9(Starting Of Motor Operated Appliances)	-	1	5% discount for BIS
10(Power Input & Current)	-	1500	5% discount for BIS
11(Temperature Rise/Heating)	-	2500	5% discount for BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	5% discount for BIS
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	800	5% discount for BIS
15(Moisture Resistance)	-	3000	5% discount for BIS
16(Leakage Current and Electric Strength)	-	500	5% discount for BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	5% discount for BIS
18(Endurance)	-	1	5% discount for BIS
19(Abnormal Operation)	-	1500	5% discount for BIS
20(Stability & Mechanical Hazards)	-	800	5% discount for BIS
21(Mechanical strength)	-	800	5% discount for BIS
22(Construction)	-	1000	5% discount for BIS
23(Internal wiring)	-	800	5% discount for BIS
24(Component)	-	100	5% discount for BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1000	5% discount for BIS
26(Terminals For External Conductors)	-	800	5% discount for BIS
27(Provision For Earthing)	-	1000	5% discount for BIS
28(Screws & Connection)	-	800	5% discount for BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	5% discount for BIS
30(Resistance to Heat & Fire)	-	1500	5% discount for BIS
31(Resistance to Rusting)	-	700	5% discount for BIS
32(Radiation ,Toxicity and similar hazards)	-	700	5% discount for BIS

31 Dec, 2026

IS 302 : Part 2 : Sec 13 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1	5% discount for BIS
6(Classification)	-	100	5% discount for BIS
7(Marking/ Marking & Instructions)	-	300	5% discount for BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	5% discount for BIS
9(Starting Of Motor Operated Appliances)	-	1	5% discount for BIS
10(Power Input)	-	1000	5% discount for BIS
11(Temperature Rise/Heating)	-	2000	5% discount for BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	800	5% discount for BIS
14(Transient Over Voltage)	-	1000	5% discount for BIS
15(Moisture Resistance)	-	3000	5% discount for BIS
16(Leakage Current and Electric Strength)	-	800	5% discount for BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	5% discount for BIS
18(Endurance)	-	1	5% discount for BIS
19(Abnormal Operation)	-	2000	5% discount for BIS
20(Stability & Mechanical Hazards)	-	800	5% discount for BIS
21(Mechanical strength)	-	800	5% discount for BIS
22(Construction)	-	1500	5% discount for BIS
23(Internal wiring)	-	800	5% discount for BIS
24(Components)	-	100	5% discount for BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1000	5% discount for BIS
26(Terminals For External Conductors)	-	800	5% discount for BIS
27(Provision For Earthing)	-	800	5% discount for BIS
28(Screws & Connections)	-	800	5% discount for BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	5% discount for BIS
30(Resistance to Heat, Fire and Tracking)	-	1500	5% discount for BIS
31(Resistance to Rusting)	-	800	5% discount for BIS
32(Radiation ,Toxicity and similar hazards)	-	800	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020 Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	100	5% discount for BIS
6(Classification)	-	100	5% discount for BIS
7(Marking/ Marking & Instructions)	-	300	5% discount for BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	5% discount for BIS
9(Starting Of Motor Operated Appliances)	-	1	5% discount for BIS
10(Input)	-	1000	5% discount for BIS
11(Temperature Rise/Heating)	-	2000	5% discount for BIS
12(Operation under overload conditions of appliances with heating elements)	-	1	5% discount for BIS
13(Electrical insulation and Leakage Current at Operating Temperature)	-	500	5% discount for BIS
14(Radio and television interference suppression/ Transient Overvoltages)	-	1000	5% discount for BIS
15(Moisture Resistance)	-	2500	5% discount for BIS
16(Insulation resistance and Electric Strength (After humidity treatment))	-	500	5% discount for BIS
17(Overload Protection)	-	750	5% discount for BIS
18(Endurance)	-	1	5% discount for BIS
19(Abnormal Operation)	-	2500	5% discount for BIS
20(Stability & Mechanical Hazards)	-	1000	5% discount for BIS
21(Mechanical strength)	-	1000	5% discount for BIS
22(Construction)	-	1500	5% discount for BIS
23(Internal wiring)	-	750	5% discount for BIS
24(Component)	-	100	5% discount for BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1200	5% discount for BIS
26(Terminals For External Conductors)	-	1000	5% discount for BIS
27(Provision For Earthing)	-	1200	5% discount for BIS
28(Screws & Connection)	-	1000	5% discount for BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	5% discount for BIS
30(Resistance to Heat, Fire and Tracking)	-	1500	5% discount for BIS
31(Resistance to Rusting)	-	1000	5% discount for BIS
32(Radiation hazards)	-	500	5% discount for BIS

31 Dec, 2026

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	50	5% discount for BIS
7(Classification)	-	50	5% discount for BIS
8(Marking)	-	100	5% discount for BIS
8.9(Marking)	-	100	5% discount for BIS
10(Protection against Electric Shock)	-	200	5% discount for BIS
11.1(Provision for earthing)	-	200	5% discount for BIS
12(Terminals)	-	300	5% discount for BIS
12.2.1(Terminals)	-	300	5% discount for BIS
12.2.2(Connection of conductor)	-	300	5% discount for BIS
12.2.3(Mechanical strength of terminals)	-	300	5% discount for BIS
12.2.4(Resistance to corrosion)	-	300	5% discount for BIS
12.2.5(Undue damage to conductor)	-	300	5% discount for BIS
12.2.7(Insertion of conductor)	-	300	5% discount for BIS
12.2.9(Locking against accidental loosening)	-	300	5% discount for BIS
12.2.11(Distance between screw and conductor)	-	300	5% discount for BIS
12.3.2(Screwless terminals)	-	300	5% discount for BIS
12.3.3(Connectin of conductor)	-	300	5% discount for BIS
12.3.4(Material of terminals)	-	300	5% discount for BIS
12.3.5(Clamping)	-	300	5% discount for BIS
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	300	5% discount for BIS
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	300	5% discount for BIS
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	300	5% discount for BIS
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	300	5% discount for BIS
13.2(b) Construction of switch [Cl 13.2])	-	300	5% discount for BIS
13.2(i) Installation Test)	-	300	5% discount for BIS
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	300	5% discount for BIS
13.4(d) Ordinary switches [Cl 13.4])	-	300	5% discount for BIS
13.5(e) Rotary switches [Cl 13.5])	-	300	5% discount for BIS
13.6(f) Screws and other means [Cl 13.6])	-	300	5% discount for BIS
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	300	5% discount for BIS
13.8(h) Assessories combined with switches [Cl. 13.8])	-	300	5% discount for BIS
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	300	5% discount for BIS
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	300	5% discount for BIS
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	300	5% discount for BIS
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	300	5% discount for BIS
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	300	5% discount for BIS
14(Mechanism [Cl. 14])	-	300	5% discount for BIS
14.3(d)Test for arcing and sparking [Cl 14.3])	-	300	5% discount for BIS
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	600	5% discount for BIS
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	600	5% discount for BIS
15.3(c) Resistance to Humidity [Cl. 15.3])	-	600	5% discount for BIS
16.1(Insulation resistance [Cl. 16.1])	-	400	5% discount for BIS
16.2( Electric Strength [Cl. 16.2])	-	400	5% discount for BIS
17(Temperature- rise [Cl. 17])	-	500	5% discount for BIS
18(Marking and breaking Capacity[Cl. 18])	-	800	5% discount for BIS
19(Normal Operation [Cl. 19] a) General & Operation)	-	600	5% discount for BIS
19(b) Electric Strength)	-	1	5% discount for BIS
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	600	5% discount for BIS
20(Mechanical Strength Test [Cl. 20])	-	300	5% discount for BIS
21(Resistance to Heat [Cl.21])	-	400	5% discount for BIS
22(Screw, Current Carrying Part And Connection [Cl.22])	-	300	5% discount for BIS
22.1(i) Screw & Nuts [Cl.22.1])	-	300	5% discount for BIS
22.3(iii) Electrical Connections [Cl.22.3])	-	300	5% discount for BIS
22.4(ii) Screw & rivets [Cl . 22.4])	-	300	5% discount for BIS
22.5(iv) Current carrying part [Cl.22.5])	-	300	5% discount for BIS
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	300	5% discount for BIS
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	400	5% discount for BIS
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	400	5% discount for BIS
25 of IS 3854 : 1997(Resistance to rusting)	-	300	5% discount for BIS
Cl-4(General Requirements)	-	0	5% discount for BIS
Cl-9(Checking of Dimensions)	-	50	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f. 17.07.2019 Up to 16A without :AX Type

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

9500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	250	5% discount for BIS
10.1(Dimentions)	-	250	5% discount for BIS
10.2(Dimentions)	-	250	5% discount for BIS
11.1(Accessibility of live parts )	-	500	5% discount for BIS
11.2(Accessibility of live parts )	-	500	5% discount for BIS
11.3(Accessibility of live parts )	-	500	5% discount for BIS
11.4(Accessibility of live parts )	-	500	5% discount for BIS
11.4.1(Accessibility of live parts )	-	500	5% discount for BIS
12.1(Provision for Earthing)	-	500	5% discount for BIS
12.2(Provision for Earthing)	-	500	5% discount for BIS
13.1(Terminals)	-	300	5% discount for BIS
13.2(Terminals)	-	300	5% discount for BIS
13.3(Terminals)	-	300	5% discount for BIS
13.4(Terminals)	-	300	5% discount for BIS
13.5(Terminals)	-	300	5% discount for BIS
13.6(Terminals)	-	300	5% discount for BIS
13.7(Terminals)	-	300	5% discount for BIS
13.8.1(Terminals)	-	300	5% discount for BIS
13.8.2(Terminals)	-	300	5% discount for BIS
13.8.3(Terminals)	-	300	5% discount for BIS
14.1(Construction)	-	250	5% discount for BIS
14.2(Construction)	-	250	5% discount for BIS
14.3(Construction)	-	250	5% discount for BIS
14.4(Construction)	-	250	5% discount for BIS
15.1(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
15.2(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
15.3(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
15.4(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
15.5(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
15.6(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
15.7(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	5% discount for BIS
16(Temperature Rise Test)	-	600	5% discount for BIS
18(Resistance to heat)	-	750	5% discount for BIS
19(Resistance to abnormal heat fire and tracking)	-	1200	5% discount for BIS
19.2(Resistance to abnormal heat fire and tracking)	-	1200	5% discount for BIS
19.3(Resistance to abnormal heat fire and tracking)	-	1200	5% discount for BIS
20.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	600	5% discount for BIS
20.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	600	5% discount for BIS
20.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	600	5% discount for BIS
21.1(CREEPAGE DISTANCE AND CLEARANCES)	-	300	5% discount for BIS
22.1(Resistance to Excessive residual Stress and to Rusting )	-	1200	5% discount for BIS
Cl-5(General Requirements)	-	100	5% discount for BIS
Cl-7(Ratings)	-	200	5% discount for BIS
Cl-8(Classification)	-	300	5% discount for BIS
Cl-17(Mechanical Strength)	-	300	5% discount for BIS
Cl-22.2(Resistance to excessive Residual Stress and to rusting)	-	600	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

Boxes and Enclosures for Electrical Accessories

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	200	-
7.2(Type of installation)	-	200	-
7.3(Types of inlets)	-	200	-
7.4(Clamping means)	-	200	-
7.5(Minimum temperature during installation)	-	200	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	200	-
7.9(The provision for fixing accessories to the boxes )	-	200	-
7.1(The method of fixing the terminals)	-	200	-
8.1(marking)	-	200	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	200	-
8.3(BIS Certification Marking)	-	200	-
9.0(Dimensions)	-	1000	-
10.0(Protection against electric shock)	-	1500	-
11.0(PROVISION FOR EARTHING)	-	1000	-
12.0(Constructions)	-	3500	-
13.0(Resistance to ingress of solid objects)	-	4000	-
13.0(Resistance toharmful ingress of water)	-	4000	-
13.0(Resistance to ageing)	-	4000	-
14.0(insultation resistance)	-	2500	-
14.0(electric strength)	-	2500	-
15.0(Mechanical strength)	-	2500	-
16.0(resistance to heat)	-	2500	-
17.0(creepage distance)	-	1500	-
17.0(clearances)	-	1500	-
17.0(distance through seating compund)	-	1500	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	4000	-
19.0(Resistance to tracking)	-	2750	-
20.0(Resistance to corrosion)	-	2750	-
21.0(Electromagnetic compatibility (EMC))	-	0	-

31 Dec, 2026

-
-

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

Switch-Socket-Outlets (Non-Interlock Type)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 IS 15787:2008(Ratings )	-	10	-
Cl.7 IS 15787:2008(Classification)	-	10	-
Cl.8 IS 15787:2008(Marking )	-	30	-
Cl.9 IS 15787:2008(Checking of dimension)	-	200	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	500	-
Cl.11 IS 15787:2008(Provision for earthing )	-	500	-
Cl.12 IS 15787:2008(Terminals)	-	1000	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1000	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	800	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1500	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	500	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	500	-
Cl.19 IS 15787:2008(Temperature rise )	-	3000	-
Cl.20 IS 15787:2008(Making & Breaking )	-	3500	-
Cl.21 IS 15787:2008(Normal operation )	-	2000	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	500	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	500	-
Cl.24 IS 15787:2008(Mechanical strength)	-	700	-
Cl.25 IS 15787:2008(Resistance to heat )	-	3000	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	500	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	250	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1000	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	500	-

31 Dec, 2026

-
-

IS 13231 (1991)

Warming plates - Specification

Warming plates

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Genral Requirement )	-	0	-
4(General Notes On Tests)	-	0	-
5(Rating)	-	10	-
6(Classification)	-	50	-
7(Marking)	-	130	-
8(Protection Against Electric Shock)	-	1000	-
10(Input And Current)	-	1000	-
11(Temperature Rise)	-	1500	-
12(Operation Under Overload Conditions Of Appliances With Heating Element)	-	0	-
13(Electrical Insulation And Leakage Current At Operating Temperature)	-	1000	-
14(Radio And Television Interference Suppression)	-	1000	-
15(Moisture Resistance)	-	2400	-
16(Insulation Resistance And Electric Strength)	-	1000	-
17(Overload Protection)	-	500	-
18(Endurance)	-	2000	-
19(Abnormal Operation)	-	3000	-
20(Stability And Mechanical Hazards)	-	1000	-
21(Mechanical Strength)	-	1000	-
22(Construction)	-	3000	-
23(Internal Wiring)	-	1000	-
25(Supply Connections And External Flexible Cables And Cords)	-	500	-
26(Terminals For External Conductors)	-	500	-
27(Provision For Earthing)	-	500	-
28(Screws And Connections)	-	500	-
29(Creepage Distances And Clearances)	-	500	-
30(Resistance To Heat, Fire And Tracking)	-	1000	-
31(Resistance To Rusting)	-	800	-
32(Radiation Hazards)	-	50	-
33(Finish)	-	50	-

31 Dec, 2026

-
-

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

Range hoods

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	50	5% discount for BIS
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	500	5% discount for BIS
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	500	5% discount for BIS
Clause No - 8.2(Addition)	-	500	5% discount for BIS
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	5% discount for BIS
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2000	5% discount for BIS
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	2000	5% discount for BIS
Clause No - 14(Impulse test voltage)	-	2000	5% discount for BIS
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	5000	5% discount for BIS
Clause No -19.7(test is repeated with the capacitor short circuited)	-	2800	5% discount for BIS
Clause No -21.1(Mechanical strength)	-	1000	5% discount for BIS
Clause No -22.1(construction)	-	2500	5% discount for BIS
Clause No -22.11(push force applied)	-	2500	5% discount for BIS
Clause No -25.8, Table no -11(conductor resistance)	-	1500	5% discount for BIS
Clause No -25.5(dimension for pins)	-	1500	5% discount for BIS
Clause No -27.6(for circuit board)	-	1000	5% discount for BIS
Clause No -29.2(comparative tracking index)	-	1000	5% discount for BIS
Clause No -29.3.3(dry heat test)	-	1000	5% discount for BIS
Clause No -30.2.1(glow wire test)	-	2000	5% discount for BIS
Clause No -30.101("incorporate combustible material")	-	2000	5% discount for BIS

31 Dec, 2026

-
Exclusion: Clause No -19.11.4.1 (electrostatic discharge) Clause No -19.11.4.2 (radiated field) Clause No -19.11.4.3 (fast transient) Clause No -19.11.4.4 (Voltage dips and interruption) Clause No -24.1.2 (safety isolating transformer) Clause No -24.1.3 (for switches) Clause No -24.1.4 (for automatic control) Clause No -24.1.5 (for innterconnection couplers) Clause No -24.4 (plug and socket)

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

Switches for Domestic and Similar Purposes

8850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	100	5% discount for BIS
Cl-7(Classification)	-	100	5% discount for BIS
Cl-8(Marking)	-	100	5% discount for BIS
Cl-9(Checking of dimensions)	-	200	5% discount for BIS
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	30	5% discount for BIS
Cl-10.3(Requirements for Accessible Metal Parts)	-	30	5% discount for BIS
Cl-10.4(Requirements for Insulation of the Mechanism)	-	30	5% discount for BIS
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	30	5% discount for BIS
Cl-10.6(Requirements for Switches Operated Indirectly)	-	30	5% discount for BIS
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	30	5% discount for BIS
Cl-11(Provision for earthing)	-	200	5% discount for BIS
Cl-12(Terminals)	-	200	5% discount for BIS
Cl-13(Constructional requirements)	-	200	5% discount for BIS
Cl-14(Mechanism)	-	200	5% discount for BIS
Cl-15.1(Resistance to Ageing)	-	250	5% discount for BIS
Cl-15.2(Protection Provided by Enclosures of Switches)	-	250	5% discount for BIS
Cl-15.3(Resistance to Humidity)	-	250	5% discount for BIS
Cl-16.1(General)	-	100	5% discount for BIS
Cl-16.2(Test for Measuring the Insulation Resistance)	-	200	5% discount for BIS
Cl-16.3(Electric Strength Test)	-	200	5% discount for BIS
Cl-17(Temperature rise)	-	600	5% discount for BIS
Cl-18(Making and breaking capacity)	-	2750	5% discount for BIS
Cl-19(Normal operation)	-	500	5% discount for BIS
Cl-20(Mechanical strength)	-	300	5% discount for BIS
Cl-21(Resistance to heat)	-	500	5% discount for BIS
Cl-22(Screws, current carrying parts and connections)	-	250	5% discount for BIS
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	200	5% discount for BIS
Cl-24.1(Resistance to abnormal heat and fire)	-	350	5% discount for BIS
Cl-24.2(Resistance to tracking)	-	150	5% discount for BIS
Cl-25(Resistance to rusting)	-	500	5% discount for BIS

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 781 Sonipat Haryana

781, HSIIDC Rai Industrial Estate, Sonipat, Sonipat, Haryana, 131029

9810562215 director@bharattesthouse.com

Scope List