BIS - LIMS (Laboratory Information Management System)

ACE TEST HOUSE PVT. LTD.

KHASRA NO 1089, First Floor near Laxmi Narayan Mandir , Village Bhalswa, New Delhi, North West, Delhi, 110033

7042858881 ath2@acetesthouse.com

Scope List

Reset

14 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14155 (1994)

Domestic electric clothes washing machines for household use - Specification

DOMESTIC ELECTRIC CLOTHES WASHING MACHINES FOR HOUSEHOLD USE

165600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18(Finish)	-	500	-
17(Endurance)	-	2500	-
16(Determination of mechanical detergent loss in the sump of washing machine)	-	9100	-
15(Determination of water and energy consumption)	-	9100	-
14(Determination of the water extraction efficiency)	-	9100	-
13(Determination of water retention percentage (Rinsing efficiency))	-	9100	-
12(Determination of wear suffered by textile)	-	9100	-
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	9100	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement)	-	28000	-
Cl.9 (Cl.24 of IS 302-2-7)(Component)	-	2500	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement for Washing machine)	-	28000	-
9.1(Spin Extractor safety requirement)	-	2500	-
Cl-9 (Cl-8 of IS 302-2-7)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	2500	-
Cl-9 (Cl-10 of IS 302-2-7)(POWER INPUT AND CURRENT)	-	2500	-
Cl-9 (Cl-11 of IS 302-2-7)(HEATING)	-	2500	-
Cl-9 (Cl-13 of IS 302-2-7)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500	-
Cl-9 (Cl-14 of IS 302-2-7)(TRANSIENT OVERVOLTAGES)	-	2500	-
Cl-9 (Cl-15 of IS 302-2-7)(MOISTURE RESISTANCE)	-	2500	-
Cl-9 (Cl-16 of IS 302-2-7)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2500	-
Cl-9 (Cl-17 of IS 302-2-7)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-
Cl-9 (Cl-19 of IS 302-2-7)(ABNORMAL OPERATION)	-	2500	-
Cl-9 (Cl-20 of IS 302-2-7)(STABILITY AND MECHANICAL HAZARDS)	-	2500	-
Cl-9 (Cl-21 of IS 302-2-7)(MECHANICAL STRENGTH)	-	2500	-
Cl-9 (Cl-22 of IS 302-2-7)(CONSTRUCTION)	-	2500	-
Cl-9 (Cl-23 of IS 302-2-7)(INTERNAL WIRING)	-	2500	-
Cl-9 (Cl-24 of IS 302-2-7)(COMPONENTS)	-	2500	-
Cl-9 (Cl-25 of IS 302-2-7)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	-
Cl-9 (Cl-26 of IS 302-2-7)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	-
Cl-9 (Cl-27 of IS 302-2-7)(PROVISION FOR EARTHING)	-	2500	-
Cl-9 (Cl-28 of IS 302-2-7)(SCREWS AND CONNECTIONS)	-	2500	-
Cl-9 (Cl-29 of IS 302-2-7)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2500	-
Cl-9 (Cl-30 of IS 302-2-7)(RESISTANCE TO HEAT AND FIRE)	-	2500	-
Cl-9 (Cl-31 of IS 302-2-7)(RESISTANCE TO RUSTING)	-	2500	-
18(Finish)	-	-	-
17(Endurance)	-	-	-
16(Determination of mechanical detergent loss in the sump of washing machine)	-	-	-
15(Determination of water and energy consumption)	-	-	-
14(Determination of the water extraction efficiency)	-	-	-
13(Determination of water retention percentage (Rinsing efficiency))	-	-	-
12(Determination of wear suffered by textile)	-	-	-
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	-	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement)	-	-	-
Cl.9 (Cl.24 of IS 302-2-7)(Component)	-	-	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement for Washing machine)	-	-	-
9.1(Spin Extractor safety requirement)	-	-	-
Cl-9 (Cl-8 of IS 302-2-7)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	-	-
Cl-9 (Cl-10 of IS 302-2-7)(POWER INPUT AND CURRENT)	-	-	-
Cl-9 (Cl-11 of IS 302-2-7)(HEATING)	-	-	-
Cl-9 (Cl-13 of IS 302-2-7)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-	-
Cl-9 (Cl-14 of IS 302-2-7)(TRANSIENT OVERVOLTAGES)	-	-	-
Cl-9 (Cl-15 of IS 302-2-7)(MOISTURE RESISTANCE)	-	-	-
Cl-9 (Cl-16 of IS 302-2-7)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-	-
Cl-9 (Cl-17 of IS 302-2-7)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	-	-
Cl-9 (Cl-19 of IS 302-2-7)(ABNORMAL OPERATION)	-	-	-
Cl-9 (Cl-20 of IS 302-2-7)(STABILITY AND MECHANICAL HAZARDS)	-	-	-
Cl-9 (Cl-21 of IS 302-2-7)(MECHANICAL STRENGTH)	-	-	-
Cl-9 (Cl-22 of IS 302-2-7)(CONSTRUCTION)	-	-	-
Cl-9 (Cl-23 of IS 302-2-7)(INTERNAL WIRING)	-	-	-
Cl-9 (Cl-24 of IS 302-2-7)(COMPONENTS)	-	-	-
Cl-9 (Cl-25 of IS 302-2-7)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-	-
Cl-9 (Cl-26 of IS 302-2-7)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-	-
Cl-9 (Cl-27 of IS 302-2-7)(PROVISION FOR EARTHING)	-	-	-
Cl-9 (Cl-28 of IS 302-2-7)(SCREWS AND CONNECTIONS)	-	-	-
Cl-9 (Cl-29 of IS 302-2-7)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-	-
Cl-9 (Cl-30 of IS 302-2-7)(RESISTANCE TO HEAT AND FIRE)	-	-	-
Cl-9 (Cl-31 of IS 302-2-7)(RESISTANCE TO RUSTING)	-	-	-

08 Sep, 2028

-
included w.e.f 11.08.2026. 1 Cl-9 (Cl-32 of IS 302-2-7) (RADIATION, TOXICITY AND SIMILAR HAZARDS) Radiation, toxicity and similar 32 hazards Test facility not available 2 Cl-19.11.4.1 of IS 302-2-7 (Electrostatic discharge) Abnormal operation Test facility not available 3 Cl-19.11.4.2 of IS 302-2-7 (Radiated Fields) Abnormal operation Test facility not available 4 Cl-19.11.4.3 of IS 302-2-7 (Fast transient bursts) Abnormal operation Test facility not available 5 Cl-19.11.4.4 of IS 302-2-7 (Surge Immunity test) Abnormal operation Test facility not available 6 Cl-19.11.4.5 of IS 302-2-7 (Immunity to conducted discharge) Abnormal operation Test facility not available 7 Cl-19.11.4.6 of IS 302-2-7 (Voltage dips and interruptions) Abnormal operation Test facility not available 8 Cl-19.11.4.7 of IS 302-2-7 (Harmonics) Abnormal operation Test facility not available

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

INSECT KILLER

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	0	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	0	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	0	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	0	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	0	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	0	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	0	-
Cl. 24 302-2-59 : 1999(Components)	-	0	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	0	-
Cl. 22 302-2-59 : 1999(Construction )	-	0	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	0	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	0	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	0	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	0	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	0	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	0	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	0	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	0	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	0	-
Cl. 7 302-2-59 : 1999(Marking)	-	0	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	0	-
4(General)	-	400	-
5(General conditions for the tests)	-	500	-
6(Classification)	-	500	-
7(Marking and instructions)	-	1000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
11.3(Heating)	-	300	-
11.7(Heating)	-	300	-
11.8(Heating)	-	300	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	500	-

08 Sep, 2028

-
Included w.e.f 07.08.2026 Exclusions: 12 (Charging of metal-ion batteries) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Voltage surges) 19.11.4.5 (Injected currents) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Mains signals) 32 (Radiation, toxicity and similar hazards)

IS 302 : Part 2 : Sec 45 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 45 electric heating tools

Hair Dryer

37900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	600	-
8(Protection against Access to Live Parts)	-	2000	-
6(Classification)	-	600	-
7(Marking)	-	1500	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	2000	-
13(Electric Insulation at Operating Temperature)	-	2000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	2000	-
15(Moisture Resistance)	-	2000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1600	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	1200	-
23(Internal Wiring)	-	2000	-
24(Components)	-	1200	-
25(Supply Connection & External Flexible Cords)	-	1200	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	1200	-
28(Screws & Connections)	-	1000	-
29(Creepage Distances & Clearances)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
XXV of Table 101(Resistance to Rusting)	-	1200	-
4(General Requirement)	-	600	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8(Protection against Access to Live Parts)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Electric Insulation at Operating Temperature)	-	0	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	0	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal Wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Creepage Distances & Clearances)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
9(Starting Of Motor Operated Appliances)	-	500	-
12(Operation Under Overload Condition)	-	500	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8(Protection against Access to Live Parts)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Electric Insulation at Operating Temperature)	-	0	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	0	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal Wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Creepage Distances & Clearances)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
12(Operation Under Overload Condition)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8(Protection against Access to Live Parts)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Electric Insulation at Operating Temperature)	-	0	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	0	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal Wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Creepage Distances & Clearances)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
12(Operation Under Overload Condition)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8(Protection against Access to Live Parts)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Electric Insulation at Operating Temperature)	-	0	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	0	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal Wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Creepage Distances & Clearances)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
12(Operation Under Overload Condition)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8(Protection against Access to Live Parts)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Electric Insulation at Operating Temperature)	-	0	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	0	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal Wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Creepage Distances & Clearances)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
12(Operation Under Overload Condition)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8(Protection against Access to Live Parts)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	0	-
13(Electric Insulation at Operating Temperature)	-	0	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	0	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal Wiring)	-	0	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connections)	-	0	-
29(Creepage Distances & Clearances)	-	0	-
30(Resistance to Heat, Fire and Tracking)	-	0	-
XXV of Table 101(Resistance to Rusting)	-	0	-
4(General Requirement)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
12(Operation Under Overload Condition)	-	0	-

08 Sep, 2028

-
Included w.e.f 07.08.2026 Exclusions: 24 (Components) 31 (Radiation hazards) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

Safety of household and similar appliances Part 2 Particular Requirements – Section 23 Appliances for Skin or Hair Care

17700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	600	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	800	-
28(Screws & Connection)	-	800	-
27(Provision For Earthing)	-	800	-
26(Terminals For External Conductors)	-	600	-
25(Supply Connection & External Flexible Cables and Cords)	-	600	-
24(Component)	-	600	-
23(Internal wiring)	-	800	-
22(Construction)	-	600	-
21(Mechanical strength)	-	600	-
20(Stability & Mechanical Hazards)	-	600	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	700	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	600	-
7(Marking/ Marking & Instructions)	-	600	-
6(Classification)	-	600	-
22.32(CONSTRUCTION)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connection)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
24(Component)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/Heating)	-	0	-
10(Power Input & Current)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
6(Classification)	-	0	-
22.32(CONSTRUCTION)	-	0	-
18(Endurance)	-	0	-
14(Transient Over Voltage)	-	800	-
9(Starting Of Motor Operated Appliances)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connection)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
24(Component)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/Heating)	-	0	-
10(Power Input & Current)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
6(Classification)	-	0	-
22.32(CONSTRUCTION)	-	0	-
18(Endurance)	-	0	-
14(Transient Over Voltage)	-	800	-
9(Starting Of Motor Operated Appliances)	-	0	-
31(Resistance to Rusting)	-	-	-
30(Resistance to Heat & Fire)	-	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-	-
28(Screws & Connection)	-	-	-
27(Provision For Earthing)	-	-	-
26(Terminals For External Conductors)	-	-	-
25(Supply Connection & External Flexible Cables and Cords)	-	-	-
24(Component)	-	-	-
23(Internal wiring)	-	-	-
22(Construction)	-	-	-
21(Mechanical strength)	-	-	-
20(Stability & Mechanical Hazards)	-	-	-
19(Abnormal Operation)	-	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-	-
16(Leakage Current and Electric Strength)	-	-	-
15(Moisture Resistance)	-	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-	-
11(Temperature Rise/Heating)	-	-	-
10(Power Input & Current)	-	-	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	-	-
7(Marking/ Marking & Instructions)	-	-	-
6(Classification)	-	-	-
22.32(CONSTRUCTION)	-	-	-
18(Endurance)	-	-	-
14(Transient Over Voltage)	-	-	-
9(Starting Of Motor Operated Appliances)	-	-	-

08 Sep, 2028

-
Included w.e.f 28.01.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC) Cl 32 (Radiation ,Toxicity and similar hazards), Cl. 22.32, Cl. 24

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

Electric Kitchen Machines

16050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.3(Marking- IS 302-1)	-	50	-
7.4(Marking- IS 302-1)	-	50	-
7.6(Marking- IS 302-1)	-	50	-
7.7(Marking- IS 302-1)	-	50	-
7.8(Marking- IS 302-1)	-	50	-
7.11(Marking- IS 302-1)	-	50	-
7.12(Marking- IS 302-1)	-	50	-
7.13(Marking- IS 302-1)	-	50	-
7.14(Marking- IS 302-1)	-	50	-
7.15(Marking- IS 302-1)	-	50	-
7.101(Marking)	-	50	-
8( Protection Against Electric Shock, IS 302-1)	-	300	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	400	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	400	-
15.1(Moisture Resistance, IS 302-1)	-	400	-
15.2(Moisture Resistance, IS 302-1)	-	400	-
15(Moisture Resistance, IS 302-1)	-	100	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	400	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	400	-
19.7(Abnormal Operation, IS 302-1)	-	100	-
19.8(Abnormal Operation, IS 302-1)	-	100	-
19.9(Abnormal Operation, IS 302-1)	-	100	-
19.1(Abnormal Operation, IS 302-1)	-	100	-
19.101(Abnormal Operation)	-	100	-
19.102(Abnormal Operation)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
20.101(Stability & Mechanical Hazards)	-	100	-
20.102(Stability & Mechanical Hazards)	-	100	-
20.103(Stability & Mechanical Hazards)	-	100	-
20.104(Stability & Mechanical Hazards)	-	100	-
20.105(Stability & Mechanical Hazards)	-	100	-
20.106(Stability & Mechanical Hazards)	-	100	-
20.107(Stability & Mechanical Hazards)	-	100	-
20.108(Stability & Mechanical Hazards)	-	100	-
20.109(Stability & Mechanical Hazards)	-	100	-
20.110(Stability & Mechanical Hazards)	-	100	-
20.111(Stability & Mechanical Hazards)	-	100	-
20.112(Stability & Mechanical Hazards)	-	100	-
20.113(Stability & Mechanical Hazards)	-	100	-
20.114(Stability & Mechanical Hazards)	-	100	-
20.115(Stability & Mechanical Hazards)	-	100	-
20.116(Stability & Mechanical Hazards)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	250	-
21.2(Mechanical Strength, IS 302-1)	-	250	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
24.1(Components, IS 302-1)	-	100	-
24.2(Components, IS 302-1)	-	100	-
24.5(Components, IS 302-1)	-	100	-
24.6(Components, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	400	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	400	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	400	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	700	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	700	-
31(Resistance of Rusting, IS 302-1)	-	300	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
27(Provision for Earthing)	-	100	-
29(Clearances, Creepage distances and Solid Insulation)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-

08 Sep, 2028

-
-

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

room heaters

16650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	100	-
Cl.6 (Classification)	-	100	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7(Marking and Instructions)	-	50	-
Cl.7(Marking and Instructions)	-	50	-
Cl.7(Marking and Instructions)	-	50	-
Cl.7.3(Marking and Instructions)	-	50	-
Cl.7.3(Marking and Instructions)	-	50	-
Cl.7.3(Marking and Instructions)	-	50	-
Cl.7.4(Marking and Instructions)	-	50	-
Cl.7.5(Marking and Instructions)	-	50	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	50	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	50	-
Cl.7.14(Marking and Instructions)	-	50	-
Cl.7.14(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	-
Cl.7.101(Marking and Instructions)	-	50	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	400	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	700	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11 & IS:302-1:2008(Heating)	-	50	-
Cl.11.8(Heating)	-	50	-
Cl.11.8(Heating)	-	50	-
Cl.11.8(Heating)	-	50	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	300	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	300	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	300	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	300	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	300	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	300	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	50	-
Cl.19.101(Abnormal Operation.)	-	50	-
Cl.19.102(Abnormal Operation.)	-	50	-
Cl.19.103(Abnormal Operation.)	-	50	-
Cl.19.104(Abnormal Operation.)	-	50	-
Cl.19.105(Abnormal Operation.)	-	50	-
Cl.19.106(Abnormal Operation.)	-	50	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	50	-
Cl.19.107(Abnormal Operation.)	-	50	-
Cl.19.108(Abnormal Operation.)	-	50	-
Cl.19.109(Abnormal Operation.)	-	50	-
Cl.19.110(Abnormal Operation.)	-	50	-
Cl.19.111(Abnormal Operation.)	-	50	-
Cl.19.112(Abnormal Operation.)	-	50	-
Cl.19.113(Abnormal Operation.)	-	50	-
Cl.19.114(Abnormal Operation.)	-	50	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	300	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	50	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	50	-
Cl.21.101 (Mechanical Strength.)	-	50	-
Cl.21.102(Mechanical Strength.)	-	50	-
Cl.21.103(Mechanical Strength.)	-	50	-
Cl.22.1 of IS 302-1:2008(Construction)	-	50	-
Cl.22.5 of IS 302-1:2008(Construction)	-	50	-
Cl.22.7 of IS 302-1:2008(Construction)	-	50	-
Cl.22.8 of IS 302-1:2008(Construction)	-	50	-
Cl.22.9 of IS 302-1:2008(Construction)	-	50	-
Cl.22.11(Construction)	-	50	-
Cl.22.12 of IS 302-1:2008(Construction)	-	50	-
Cl.22.13 of IS 302-1:2008(Construction)	-	50	-
Cl.22.14 of IS 302-1:2008(Construction)	-	50	-
Cl.22.15 of IS 302-1:2008(Construction)	-	50	-
Cl.22.18 of IS 302-1:2008(Construction)	-	50	-
Cl.22.21 of IS 302-1:2008(Construction)	-	50	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	50	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	50	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	50	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	50	-
C.23.7 of 302-1:2008(Internal Wiring )	-	50	-
Cl.24.1 of 302-1:2008(Component)	-	50	-
Cl.24.1 of 302-1:2008(Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
C.24.1.4(Component)	-	50	-
C.24.2 of 302-1:2008(Component)	-	50	-
Cl.24.10(Component)	-	50	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	50	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	50	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	50	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	300	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	300	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	300	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	300	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	300	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	50	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	50	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	50	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	50	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	50	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	50	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	50	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	50	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	50	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	50	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	50	-
Cl.24 of IS:302-2-30:2007(Component)	-	50	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	50	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	50	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	50	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	50	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	50	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	50	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	50	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	50	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	50	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	50	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	50	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	50	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	50	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	50	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	50	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	50	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	50	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	50	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	50	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	50	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	50	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	50	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	50	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	50	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	50	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	50	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	50	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	50	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	50	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	50	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	50	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	50	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	50	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	50	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	50	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	50	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	50	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	50	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	50	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	50	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	50	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	50	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	50	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	50	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	50	-
Cl.22.6 of IS 302-1:2008(Construction)	-	50	-
Cl.22.20 of IS 302-1:2008(Construction)	-	50	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	50	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	200	-

08 Sep, 2028

-
-

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

electric immersion water heaters

16050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	300	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	300	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	400	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.11 of IS 302-2201: 2008(Heating)	-	150	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	600	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	150	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	150	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	300	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	300	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	150	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	150	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	300	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	300	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	200	-

08 Sep, 2028

-
-

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

electric stoves

17900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	150	-
6(Classification- IS 302-1)	-	150	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	400	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
15.1(Moisture Resistance, IS 302-1)	-	300	-
15.3(Moisture Resistance, IS 302-1)	-	300	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	350	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	350	-
22(Construction, IS 302-1)	-	150	-
22.101(Construction)	-	150	-
22.102(Construction)	-	150	-
22.103(Construction)	-	150	-
22.104(Construction)	-	150	-
22.105(Construction)	-	150	-
22.105.1(Construction)	-	150	-
22.105.2(Construction)	-	150	-
22.106(Construction)	-	150	-
22.107(Construction)	-	150	-
11.107.1(Construction)	-	150	-
23.1(Internal Wiring, IS 302-1)	-	150	-
23.2(Internal Wiring, IS 302-1)	-	150	-
23.8(Internal Wiring, IS 302-1)	-	150	-
23.9(Internal Wiring, IS 302-1)	-	150	-
23.10(Internal Wiring, IS 302-1)	-	150	-
24.1(Components, IS 302-1)	-	150	-
24.2(Components, IS 302-1)	-	150	-
24.101(Components)	-	150	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.4(Supply Connection and External Flexible Cords)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	400	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
31(Resistance of Rusting, IS 302-1)	-	300	-
7.13(Marking- IS 302-1)	-	100	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	300	-
6(Classification- IS 302-1 )	-	150	-
6(Classification- IS 302-1)	-	150	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	400	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
11(Heating, IS 302-1)	-	150	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
15.1(Moisture Resistance, IS 302-1)	-	300	-
15.3(Moisture Resistance, IS 302-1)	-	300	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	700	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	700	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.2(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
19.3(Abnormal Operation, IS 302-1)	-	350	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	350	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	350	-
22(Construction, IS 302-1)	-	150	-
22.101(Construction)	-	150	-
22.102(Construction)	-	150	-
22.103(Construction)	-	150	-
22.104(Construction)	-	150	-
22.105(Construction)	-	150	-
22.105.1(Construction)	-	150	-
22.105.2(Construction)	-	150	-
22.106(Construction)	-	150	-
22.107(Construction)	-	150	-
11.107.1(Construction)	-	150	-
23.1(Internal Wiring, IS 302-1)	-	150	-
23.2(Internal Wiring, IS 302-1)	-	150	-
23.8(Internal Wiring, IS 302-1)	-	150	-
23.9(Internal Wiring, IS 302-1)	-	150	-
23.10(Internal Wiring, IS 302-1)	-	150	-
24.1(Components, IS 302-1)	-	150	-
24.2(Components, IS 302-1)	-	150	-
24.101(Components)	-	150	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.4(Supply Connection and External Flexible Cords)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	400	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	150	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	800	-
31(Resistance of Rusting, IS 302-1)	-	300	-
7.13(Marking- IS 302-1)	-	100	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	300	-

08 Sep, 2028

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

appliances for heating liquids

17400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	200	-
7(Marking and instructions)	-	500	Testing Charges of complete Cl. No. 7, IS 302 : Part 2 : Sec 15
8(Protection against live parts)	-	700	-
10(POWER INPUT AND CURRENT)	-	1000	Testing Charges of complete Cl. No. 10, IS 302 : Part 2 : Sec 15
11(HEATING)	-	700	Testing Charges of complete Cl. No. 11, IS 302 : Part 2 : Sec 15
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	Testing Charges of complete Cl. No. 13, IS 302 : Part 2 : Sec 15
15(MOISTURE RESISTANCE)	-	1000	Testing Charges of complete Cl. No. 15, IS 302 : Part 2 : Sec 15
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	Testing Charges of complete Cl. No. 16, IS 302 : Part 2 : Sec 15
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	Testing Charges of complete Cl. No. 17, IS 302 : Part 2 : Sec 15
18(ENDURANCE)	-	1000	Testing Charges of complete Cl. No. 18, IS 302 : Part 2 : Sec 15
19(ABNORMAL OPERATION)	-	1000	Testing Charges of complete Cl. No. 19, IS 302 : Part 2 : Sec 15
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	Testing Charges of complete Cl. No. 20, IS 302 : Part 2 : Sec 15
21(MECHANICAL STRENGTH)	-	1000	Testing Charges of complete Cl. No. 21, IS 302 : Part 2 : Sec 15
22(CONSTRUCTION)	-	500	Testing Charges of complete Cl. No. 22, IS 302 : Part 2 : Sec 15
23(INTERNAL WIRING)	-	500	Testing Charges of complete Cl. No. 23, IS 302 : Part 2 : Sec 15
24(COMPONENTS)	-	500	Testing Charges of complete Cl. No. 24, IS 302 : Part 2 : Sec 15
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	Testing Charges of complete Cl. No. 25, IS 302 : Part 2 : Sec 15
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	Testing Charges of complete Cl. No. 26, IS 302 : Part 2 : Sec 15
27(PROVISION FOR EARTHING)	-	500	Testing Charges of complete Cl. No.27 , IS 302 : Part 2 : Sec 15
28(SCREWS AND CONNECTIONS)	-	500	Testing Charges of complete Cl. No.28 , IS 302 : Part 2 : Sec 15
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	Testing Charges of complete Cl. No. 29, IS 302 : Part 2 : Sec 15
30(RESISTANCE TO HEAT AND FIRE)	-	1000	Testing Charges of complete Cl. No. 30, IS 302 : Part 2 : Sec 15
31(RESISTANCE TO RUSTING)	-	500	-
4(General requirements)	-	50	-
5(General Conditions of tests)	-	50	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
22.16(Automatic cord reel)	-	0	Test facility not available
22.32(Oxygen bomb for rubber material)	-	0	Test facility not available
22.47(Water pressure inlet)	-	0	Test facility not available
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	0	-
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	300	-
10(POWER INPUT AND CURRENT)	-	500	-
11(HEATING)	-	700	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	800	-
15(MOISTURE RESISTANCE)	-	800	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	800	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	250	-
18(ENDURANCE)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	250	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	250	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	250	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	250	-
27(PROVISION FOR EARTHING)	-	250	-
28(SCREWS AND CONNECTIONS)	-	250	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
4(General requirements)	-	50	-
5(General Conditions of tests)	-	50	-
6(Classification- IS 302-1)	-	50	-
6(Classification- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-2-15)	-	10	-
7.3(Marking- IS 302-1)	-	10	-
7.4(Marking- IS 302-1)	-	10	-
7.5(Marking- IS 302-1)	-	10	-
7.6(Marking- IS 302-1)	-	10	-
7.7(Marking- IS 302-1)	-	10	-
7.8(Marking- IS 302-1)	-	10	-
6(Classification- IS 302-1)	-	50	-
6(Classification- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-1)	-	10	-
Marking- IS 302-1(Marking- IS 302-1)	-	10	-
7.1(Marking- IS 302-2-15)	-	10	-
7.3(Marking- IS 302-1)	-	10	-
7.4(Marking- IS 302-1)	-	10	-
7.5(Marking- IS 302-1)	-	10	-
7.6(Marking- IS 302-1)	-	10	-
7.7(Marking- IS 302-1)	-	10	-
7.8(Marking- IS 302-1)	-	10	-
7.9(Marking- IS 302-1)	-	10	-
7.1O(Marking- IS 302-1)	-	10	-
7.11(Marking- IS 302-1)	-	10	-
7.12(Marking- IS 302-2-15)	-	10	-
7.12(Marking- IS 302-1)	-	10	-
7.12.1(Marking- IS 302-1)	-	10	-
7.12.3(Marking- IS 302-1)	-	10	-
7.12.5(Marking- IS 302-1)	-	10	-
7.12.6(Marking- IS 302-1)	-	10	-
7.13(Marking- IS 302-1)	-	10	-
7.14(Marking- IS 302-1)	-	10	-
7.15(Marking- IS 302-1)	-	10	-
7.101(Marking- IS 302-2-15)	-	10	-
8(Protection Against Electric Shock, IS 302-1)	-	300	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	500	-
16(Leakage current as per Cl 16, IS 302-1)	-	500	-
16(electric strength as per Cl 16, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	200	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	250	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
22.1(Construction, IS 302-1)	-	100	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	250	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.1O(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	250	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	250	-
28(Screws & Connections, IS 302-1)	-	250	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	250	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	100	-
22.16(Automatic cord reel)	-	100	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	100	-
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	50	-

08 Sep, 2028

-
-

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

Electric Iron

16190 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	120	-
6(Classification- IS 302-1)	-	120	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.3(Marking- IS 302-1)	-	50	-
7.4(Marking- IS 302-1)	-	50	-
7.6(Marking- IS 302-1)	-	50	-
7.7(Marking- IS 302-1)	-	50	-
7.8(Marking- IS 302-1)	-	50	-
7.11(Marking- IS 302-1)	-	50	-
7.12(Marking- IS 302-1)	-	50	-
7.13(Marking- IS 302-1)	-	50	-
7.14(Marking- IS 302-1)	-	50	-
7.15(Marking- IS 302-1)	-	50	-
7.101(Marking)	-	50	-
8( Protection Against Electric Shock, IS 302-1)	-	200	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	300	-
15.2(Moisture Resistance, IS 302-1)	-	300	-
15.3(Moisture Resistance, IS 302-1)	-	250	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
19.4(Abnormal Operation, IS 302-1)	-	200	-
19.4(Abnormal Operation, IS 302-1)	-	200	-
19.5(Abnormal Operation, IS 302-1)	-	200	-
19.5(Abnormal Operation, IS 302-1)	-	200	-
19.7(Abnormal Operation)	-	200	-
19.9(Abnormal Operation)	-	200	-
19.1(Abnormal Operation)	-	200	-
19.101(Abnormal Operation)	-	200	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	200	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	200	-
21.1(Mechanical Strength, IS 302-1)	-	200	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
21.101(Mechanical Strength, IS 302-2-3)	-	100	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
22.103(Construction)	-	100	-
22.104(Construction)	-	100	-
22.105(Construction)	-	100	-
22.106(Construction)	-	100	-
22.107(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
24.1(Components, IS 302-1)	-	100	-
24.2(Components, IS 302-1)	-	100	-
24.4(Components, IS 302-1)	-	100	-
24.5(Components, IS 302-1)	-	100	-
24.6(Components, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	150	-
27.5(Provision for Earthing, IS 302-1)	-	150	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	500	-
4(General requirement)	-	100	-
16(Leakage current and electric strength)	-	100	-
18(Endurance)	-	300	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
19(Abnormal operation)	-	100	-
25(Supply Connection and External Flexible Cords)	-	100	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Moisture Resistance, IS 302-1)	-	0	-
15.3(Moisture Resistance, IS 302-1)	-	0	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
19.4(Abnormal Operation, IS 302-1)	-	0	-
19.4(Abnormal Operation, IS 302-1)	-	0	-
19.5(Abnormal Operation, IS 302-1)	-	0	-
19.5(Abnormal Operation, IS 302-1)	-	0	-
19.7(Abnormal Operation)	-	0	-
19.9(Abnormal Operation)	-	0	-
19.1(Abnormal Operation)	-	0	-
19.101(Abnormal Operation)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.101(Mechanical Strength, IS 302-2-3)	-	0	-
22(Construction, IS 302-1)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	0	-
24.2(Components, IS 302-1)	-	0	-
24.4(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	0	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
4(General requirement)	-	100	-
16(Leakage current and electric strength)	-	0	-
18(Endurance)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
19(Abnormal operation)	-	0	-
25(Supply Connection and External Flexible Cords)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
17(Overload protection of transformers and associated circuits)	-	200	-
17(Overload protection of transformers and associated circuits)	-	200	-
17(Overload protection of transformers and associated circuits)	-	200	-
14(Transient Over Voltages, IS 302-1)	-	800	-

08 Sep, 2028

-
included w.e.f 05.01.2026

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

electric steam cookers

25250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	250	-
5(Rating)	-	250	-
6(Classification)	-	250	-
7(Marking)	-	500	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
10(INPUT AND CURRENT)	-	1000	-
11(TEMPERATURE RISE)	-	1000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	1000	-
19(ABNORMAL OPERATION)	-	1500	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	750	-
21(MECHANICAL STRENGTH)	-	750	-
22(CONSTRUCTION)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	500	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	500	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	500	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	500	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	500	-
17(OVERLOAD PROTECTION)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.24 Components Cl.19.11 and Cl.19.12 as per IS 302 Part1, EMI/EMC

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

Deep Fat Fryers, Frying Pans and Similar Appliances

22250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.101(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	-
19.101 to to 19.102(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	750	-
22(Construction)	-	500	-
22.101(Construction)	-	500	-
23(Internal wiring)	-	1000	-
24(Components)	-	500	-
25("Supply connection and external flexible cords")	-	500	-
26("Terminals for external conductors")	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	500	-
32("Radiation, toxicity and similar hazards")	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.24 Components Cl.19.11 and Cl.19.12 as per IS 302 Part1, EMI/EMC Cl.32, Radiation Toxicity and similar Hazards

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Household and Similar Electrical Appliances

59500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	250	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	2500	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	250	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	500	-
16.0(General)	-	500	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(Moisture resistance)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	500	-
15.2(Moisture resistance)	-	1000	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.24 Components Cl.19.11 and Cl.19.12 as per IS 302 Part1, EMI/EMC Cl.32, Radiation Toxicity and similar Hazards Cl.12, Charging of metal ion batteries Cl.15.2 (degree of protection IP Tests for IPX3, IPX4, IPX5, IPX7) Cl.22.32 (Oxygen Bomb Test) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

havers, Hair Clippers and Similar Appliances

23450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	-
19.101(Abnormal operation)	-	500	-
20.1(Stability and mechanical hazards)	-	500	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	750	-
21.101(Mechanical strength)	-	500	-
21.102(Mechanical strength)	-	500	-
21.103(Mechanical strength)	-	500	-
22(Construction)	-	500	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
22.103(Construction)	-	500	-
23(Internal wiring)	-	1000	-
24(Components)	-	500	-
25("Supply connection and external flexible cords")	-	500	-
26("Terminals for external conductors")	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	500	-
32("Radiation, toxicity and similar hazards")	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-

08 Sep, 2028

Bureau of Indian Standards

The National Standards Body of India

ACE TEST HOUSE PVT. LTD.

KHASRA NO 1089, First Floor near Laxmi Narayan Mandir , Village Bhalswa, New Delhi, North West, Delhi, 110033

7042858881 ath2@acetesthouse.com

Scope List