BIS - LIMS (Laboratory Information Management System)

Intertek India Private Limited, New Delhi (E-26)

E-26, Block B-1, Mohan Co-Operative Industrial Estate, Mathura Road, Delhi, New Delhi, Delhi, 110044

9820213510 manas.das@intertek.com

Scope List

Reset

34 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 10322 (Part 1) (2026)

Luminaires Part 1 General Requirements and Tests (second revision)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(General test requirements and verification)	-	1000	10% discount offered to samples received from BIS.
Cl-6(Marking )	-	1000	10% discount offered to samples received from BIS.
Cl-7.1(Construction- General )	-	20000	10% discount offered to samples received from BIS.
Cl-7.2(Replaceable components)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.3(Wireways)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.4(Lampholders)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.5(Starterholders)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.6(Terminal blocks)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.7(Terminals and supply connections)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.8(Switches)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.9(Insulating linings and sleeves)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.10(Double and reinforced insulation)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.11(Electrical connections and current-carrying parts)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.12(Screws, connections (mechanical) and glands)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.13(Mechanical strength)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.15(Flammable materials)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.16(Luminaires for mounting on normally flammable surfaces)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.17(Drain holes)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.18(Resistance to corrosion)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.19(Ignitors)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.20(Rough service luminaires)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.21(Protective shield)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.22(Attachments to lamps)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.23(Semi-luminaires)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.25(Mechanical hazard)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.26(Short-circuit protection)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.27(Terminal blocks with integrated screwless protective earthing contacts)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.28(Fixing of thermal sensing controls)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.29(Luminaires with non-replaceable light sources)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.30(Luminaires with non-user replaceable light sources and non-user serviceable components)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.31.2(SELV or PELV circuits)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.31.3(FELV circuits)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.31.5(Additional requirements for luminaires using controllable controlgear providing SELV output)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.32(Overvoltage protective devices-General )	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.32.2(Surge protective devices (SPDs))	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.32.3(Surge protective components (SPCs))	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.32.3.6(SPC overload test)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.33(Luminaire powered via information technology communication cabling)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.35(Protection against moving fan blades)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-7.36(Track-mounted luminaires)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-8.2(Supply connection and other external wiring)	-	5000	10% discount offered to samples received from BIS.
Cl-8.3(Internal wiring)	-	0	No additional charge, charges covered under Cl. 8.2
Cl-8.4(Test to determine the suitability of conductors having a reduced crosssectional area)	-	0	No additional charge, charges covered under Cl. 8.2
Cl-9(Provision for earthing)	-	3000	10% discount offered to samples received from BIS.
Cl-10(Protection against electric shock)	-	7000	10% discount offered to samples received from BIS.
Cl-11.2(General conditions and tests for IP classification)	-	15000	10% discount offered to samples received from BIS.
Cl-11.2.2(Tests for first characteristics IP numerals 2, 3 and 4)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.3(Tests for first characteristic IP numeral 5 and 6)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.4(Drip-proof luminaires – Tests for second characteristic IP numeral 1)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.5(Drip-proof luminaires – Tests for second characteristic IP numeral 2)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.6(Rain-proof luminaires – Tests for second characteristic IP numeral 3)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.7(Splash-proof luminaires – Tests for second characteristic IP numeral 4)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.8(Jet-proof luminaires – Tests for second characteristic IP numeral 5)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.9(Powerful jet-proof luminaires – Tests for second characteristic IP numeral 6)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.10(Watertight luminaires – Tests for second characteristic IP numeral 7)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.2.11(Pressure watertight luminaires – Tests for second characteristic IP numeral 8)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-11.3(Humidity test)	-	0	No additional charge, charges covered under Cl. 11.2
Cl-12.2.2(Test – Insulation resistance)	-	10000	10% discount offered to samples received from BIS.
Cl-12.2.3(Test – Electric strength)	-	0	No additional charge, charges covered under Cl. 12.2.2
Cl-12.3(Touch current, protective conductor current and electric burn)	-	0	No additional charge, charges covered under Cl. 12.2.2
Cl-13.1(Creepage distances and clearances)	-	3000	10% discount offered to samples received from BIS.
Cl-14.2(Selection of lamps and controlgear)	-	30000	10% discount offered to samples received from BIS.
Cl-14.3(Endurance test)	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.4(Thermal test (normal operation))	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.5(Thermal test (abnormal operation))	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.6(Thermal test (failed windings in controlgear))	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.6.2(Test for luminaires without thermal cut-outs)	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.6.3(Test for luminaires with temperature sensing controls)	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.7.2(Test for luminaires without temperature sensing controls)	-	0	No additional charge, charges covered under Cl. 14.2
Cl-14.7.3(Test for luminaires with temperature sensing controls internal or external to the controlgear or transformer)	-	0	No additional charge, charges covered under Cl. 14.2
Cl-15.2(Resistance to heat)	-	12000	10% discount offered to samples received from BIS.
Cl-15.3(Resistance to flame and ignition)	-	0	No additional charge, charges covered under Cl. 15.2
Cl-15.4(Resistance to tracking)	-	0	No additional charge, charges covered under Cl. 15.2
Cl-16.1(Screw terminals- General )	-	4000	10% discount offered to samples received from BIS.
Cl-16.2(General requirements and basic principles)	-	0	No additional charge, charges covered under Cl. 16.1
Cl-16.3(Mechanical requirements and tests)	-	0	No additional charge, charges covered under Cl. 16.1
Cl-17.2(General requirements)	-	4000	10% discount offered to samples received from BIS.
Cl-17.3.3(Multi-conductor terminals)	-	0	No additional charge, charges covered under Cl. 17.2
Cl-17.4.1(Terminal and connections for internal wiring-Mechanical tests)	-	0	No additional charge, charges covered under Cl. 17.2
Cl-17.4.2(Terminal and connections for internal wiring-Electrical tests)	-	0	No additional charge, charges covered under Cl. 17.2
Cl-17.5.1(Terminals and connections for external wiring-Conductors)	-	0	No additional charge, charges covered under Cl. 17.2
Cl-17.5.2(Terminals and connections for external wiring-Mechanical tests)	-	0	No additional charge, charges covered under Cl. 17.2
Cl-17.5.3(Terminals and connections for external wiring-Electrical tests)	-	0	No additional charge, charges covered under Cl. 17.2
Annex A-2(Touch voltage limits)	-	0	No additional charge, charges covered under Cl. 12.2.2
Annex A-2(Touch current limits)	-	0	No additional charge, charges covered under Cl. 12.2.2
Annex B-2(Filament lamps within the scope of IEC 60432-1 and IEC 60432-2)	-	0	No additional charge, charges covered under Cl. 14.2
Annex B-3(Halogen lamps within the scope of IEC 60432-3)	-	0	No additional charge, charges covered under Cl. 14.2
Annex B-4(Tubular fluorescent and other discharge lamps)	-	0	No additional charge, charges covered under Cl. 14.2
Annex B-5(LED modules within the scope of IEC 62031)	-	0	No additional charge, charges covered under Cl. 14.2
Annex C(Abnormal circuit conditions)	-	0	No additional charge, charges covered under Cl. 14.2
Annex D-1(Draught-proof enclosure)	-	0	No additional charge, charges covered under Cl. 14.2
Annex D-2(Mounting surface)	-	0	No additional charge, charges covered under Cl. 14.2
Annex D-3(Alternative test procedure for adjustment of measured temperatures for luminaire ta rating(s))	-	0	No additional charge, charges covered under Cl. 14.2
Annex E (Determination of winding temperature rises by the increase-inresistance method)	-	0	No additional charge, charges covered under Cl. 14.2
Annex F (Test for resistance to stress corrosion of copper and copper alloys)	-	0	No additional charge, charges covered under Cl. 7.1
Annex G (Measurement of touch current and protective conductor current)	-	0	No additional charge, charges covered under Cl. 12.2.2
Annex K (Determination of creepage distances and clearances)	-	0	No additional charge, charges covered under Cl. 13.1
Annex P(Requirements for the identification of a family or range of luminaires for type testing)	-	0	No additional charge, charges covered under Cl. 4.2
Annex S (Alternative thermal test for thermoplastic luminaires)	-	0	No additional charge, charges covered under Cl. 14.2
Annex T (Requirements for insulation between live parts of circuits and accessible conductive parts)	-	0	No additional charge, charges covered under Cl. 7.1
Annex W (Battery/EDLC-operated luminaires)	-	0	No additional charge, charges covered under Cl. 14.2
Cl-7.14(Suspensions, fixings and means of adjustment)	-	0	No additional charge, charges covered under Cl. 7.1
Cl-17.3.4(Multi-way terminals)	-	0	No additional charge, charges covered under Cl. 17.2

27 Apr, 2029

-
-

IS 10322 (Part 5/Sec 6) (2026)

Luminaires Part 5: Particular requirements Section 6: Handlamps (First Revision)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.4(General test requirements)	-	1000	10% discount offered to samples received from BIS.
Cl-8.6(Marking)	-	1000	10% discount offered to samples received from BIS.
Cl-8.7(Construction)	-	25000	10% discount offered to samples received from BIS.
Cl-8.7.1(Handle of the handlamp)	-	0	No additional charge covered under Cl. 8.7
Cl-8.7.2(Lamp)	-	0	No additional charge covered under Cl. 8.7
Cl-8.7.4(Tungsten filament lamps)	-	0	No additional charge covered under Cl. 8.7
Cl-8.7.5(Flexible cable or cord)	-	0	No additional charge covered under Cl. 8.7
Cl-8.7.6(Mechanical strength)	-	0	No additional charge covered under Cl. 8.7
Cl-8.7.6.1(Translucent covers and protective covers)	-	0	No additional charge covered under Cl. 8.7
Cl-8.8(Creepage distances and clearances)	-	3000	10% discount offered to samples received from BIS.
Cl-8.10(Terminals)	-	3000	10% discount offered to samples received from BIS.
Cl-8.10.1(Terminals for supply connection)	-	0	No additional charge covered under Cl. 8.10
Cl-8.11(External and internal wiring)	-	8000	10% discount offered to samples received from BIS.
Cl-8.11.1(Rewirable handlamps)	-	0	No additional charge covered under Cl. 8.11
Cl-8.11.1(Non-rewirable handlamps)	-	0	No additional charge covered under Cl. 8.11
Cl-8.12(Protection against electric shock)	-	7000	10% discount offered to samples received from BIS.
Cl-8.13(Endurance tests and thermal tests)	-	30000	10% discount offered to samples received from BIS.
Cl-8.13.1(Endurance test)	-	0	No additional charge covered under Cl. 8.13
Cl-8.13.2(Thermal tests)	-	0	No additional charge covered under Cl. 8.13
Cl-8.13.3(Limiting temperature)	-	0	No additional charge covered under Cl. 8.13
Cl-8.14(Resistance to dust and moisture)	-	15000	10% discount offered to samples received from BIS.
Cl-8.15(Insulation resistance and electric strength)	-	10000	10% discount offered to samples received from BIS.
Cl-8.16(Resistance to heat, fire and tracking)	-	12000	10% discount offered to samples received from BIS.
Cl-8.4(General test requirements)	-	0	Repeat entry
Cl-8.6(Marking)	-	0	Repeat entry
Cl-8.7(Construction)	-	0	Repeat entry
Cl-8.7.1(Handle of the handlamp)	-	0	Repeat entry
Cl-8.7.2(Lamp)	-	0	Repeat entry
Cl-8.7.4(Tungsten filament lamps)	-	0	Repeat entry
Cl-8.7.5(Flexible cable or cord)	-	0	Repeat entry
Cl-8.7.6(Mechanical strength)	-	0	Repeat entry
Cl-8.7.6.1(Translucent covers and protective covers)	-	0	Repeat entry
Cl-8.8(Creepage distances and clearances)	-	0	Repeat entry
Cl-8.10(Terminals)	-	0	Repeat entry
Cl-8.10.1(Terminals for supply connection)	-	0	Repeat entry
Cl-8.11(External and internal wiring)	-	0	Repeat entry
Cl-8.11.1(Rewirable handlamps)	-	0	Repeat entry
Cl-8.11.1(Non-rewirable handlamps)	-	0	Repeat entry
Cl-8.12(Protection against electric shock)	-	0	Repeat entry
Cl-8.13(Endurance tests and thermal tests)	-	0	Repeat entry
Cl-8.13.1(Endurance test)	-	0	Repeat entry
Cl-8.13.2(Thermal tests)	-	0	Repeat entry
Cl-8.13.3(Limiting temperature)	-	0	Repeat entry
Cl-8.14(Resistance to dust and moisture)	-	0	Repeat entry
Cl-8.15(Insulation resistance and electric strength)	-	0	Repeat entry
Cl-8.16(Resistance to heat, fire and tracking)	-	0	Repeat entry

27 Apr, 2029

-
-

IS 10322 (Part 5/Sec 5) (2026)

Luminaires Part 5: Particular requirements Section 5: Floodlights (Second Revision)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.5(Marking)	-	2000	10% discount offered to samples received from BIS.
Cl-5.6(Construction)	-	20000	10% discount offered to samples received from BIS.
Cl-5.6.8.1(Protection by the use of glass that fractures into small pieces)	-	0	No additional charge covered under Cl. 5.6
5.6.8.2(Protection by the use of high impact resistant glass (high mechanical strength.))	-	0	No additional charge covered under Cl. 5.6
Cl-5.6.8.2.1(Thermal endurance test)	-	0	No additional charge covered under Cl. 5.6
Cl-5.7(Creepage distances and clearances)	-	3000	10% discount offered to samples received from BIS.
Cl-5.8(Provision for earthing)	-	3000	10% discount offered to samples received from BIS.
Cl-5.9(Terminals)	-	8000	10% discount offered to samples received from BIS.
Cl-5.10(External and internal wiring)	-	5000	10% discount offered to samples received from BIS.
Cl-5.11(Protection against electric shock)	-	7000	10% discount offered to samples received from BIS.
Cl-5.12(Endurance tests and thermal tests)	-	30000	10% discount offered to samples received from BIS.
Cl-5.13(Resistance to dust and moisture)	-	15000	10% discount offered to samples received from BIS.
Cl-5.14(Insulation resistance and electric strength)	-	10000	10% discount offered to samples received from BIS.
Cl-5.15(Resistance to heat, fire and tracking)	-	12000	10% discount offered to samples received from BIS.

27 Apr, 2029

-
-

IS 10322 (Part 5/Sec 2) (2026)

Luminaires Part 5: Particular requirements Section 2: Recessed luminaires and recessed air-handling luminaires (Second Revision)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.4(General test requirements)	-	1000	10% discount offered to samples received from BIS.
Cl-2.6.2(Marking)	-	1000	10% discount offered to samples received from BIS.
Cl-2.6.3(Marking)	-	0	Repeat entry
Cl-2.6.4(Marking)	-	0	Repeat entry
Cl-2.7(Construction)	-	20000	10% discount offered to samples received from BIS.
Cl-2.8(Creepage distances and clearances)	-	3000	10% discount offered to samples received from BIS.
Cl-2.9(Provision for earthing)	-	3000	10% discount offered to samples received from BIS.
Cl-2.10(Terminals)	-	8000	10% discount offered to samples received from BIS.
Cl-2.11(External and internal wiring)	-	5000	10% discount offered to samples received from BIS.
Cl-2.12(Protection against electric shock)	-	7000	10% discount offered to samples received from BIS.
Cl-2.13(Endurance tests and thermal tests)	-	30000	10% discount offered to samples received from BIS.
Cl-2.14(Resistance to dust and moisture)	-	15000	10% discount offered to samples received from BIS.
Cl-2.15(Insulation resistance and electric strength)	-	10000	10% discount offered to samples received from BIS.
Cl-2.16(Resistance to heat, fire and tracking)	-	12000	10% discount offered to samples received from BIS.

27 Apr, 2029

-
w.e.f. 22.09.2026

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	1000	10% discount offered to samples received from BIS.
Cl-1.6(Marking)	-	1000	10% discount offered to samples received from BIS.
Cl-1.7(Construction)	-	20000	10% discount offered to samples received from BIS.
Cl-1.8(Creepage distances and clearances)	-	3000	10% discount offered to samples received from BIS.
Cl-1.9(Provision for earthing)	-	3000	10% discount offered to samples received from BIS.
Cl-1.10(Terminals)	-	8000	10% discount offered to samples received from BIS.
Cl-1.11(External and internal wiring)	-	5000	10% discount offered to samples received from BIS.
Cl-1.12(Protection against electric shock)	-	7000	10% discount offered to samples received from BIS.
Cl-1.12(Protection against electric shock)	-	0	Repeat entry
Cl-1.13(Endurance tests and thermal tests)	-	30000	10% discount offered to samples received from BIS.
Cl-1.14(Resistance to dust, solid objects and moistur)	-	15000	10% discount offered to samples received from BIS.
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	10000	10% discount offered to samples received from BIS.
Cl-1.16(Resistance to heat, fire and tracking)	-	12000	10% discount offered to samples received from BIS.

27 Apr, 2029

-
-

IS 16102 (Part 1) (2026)

Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirenents and General Test Requirements)	-	2000	10% discount offered to sample received from BIS.
Cl-5(Marking)	-	2000	10% discount offered to sample received from BIS.
Cl-6.1(Cap Interchangeability)	-	2500	10% discount offered to sample received from BIS.
Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder)	-	2500	10% discount offered to sample received from BIS.
Cl-7(Protection Against Accidental Contact with live parts)	-	3000	10% discount offered to sample received from BIS.
Cl-8.1(Insulation resistance and electric strength)	-	2000	10% discount offered to sample received from BIS.
Cl-8.2(Insulation Resistance lamp)	-	1000	10% discount offered to sample received from BIS.
Cl-8.3(Electric Strength)	-	1000	10% discount offered to sample received from BIS.
Cl-9.1(Mechanical Strength Requirements)	-	1000	10% discount offered to sample received from BIS.
Cl-9.2.1(Torsion Resistance of Unused Lamps)	-	1000	10% discount offered to sample received from BIS.
Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage)	-	1000	10% discount offered to sample received from BIS.
Cl-9.2.3(Externally Applied Axial Pull and Bending Moment)	-	1000	10% discount offered to sample received from BIS.
Cl-9.3(Axial Strength of Edison Caps)	-	1000	10% discount offered to sample received from BIS.
Cl-10(Cap Temperature Rise)	-	5000	10% discount offered to sample received from BIS.
Cl-11(Resistance to Heat)	-	3000	10% discount offered to sample received from BIS.
Cl-12(Resistance to Flame and Ignition)	-	3000	10% discount offered to sample received from BIS.
Cl-13.1(Fault Conditions- General Requirements)	-	3000	10% discount offered to sample received from BIS.
Cl-14(Creepage Distance and Clearances)	-	2000	10% discount offered to sample received from BIS.
Cl-15(Abnormal Operation)	-	3000	10% discount offered to sample received from BIS.
Cl-16(Test Conditions for Dimmable Lamps)	-	3000	10% discount offered to sample received from BIS.
Cl-18(Ingress Protection Requirements)	-	3000	10% discount offered to sample received from BIS.
Cl-19(Information for luminaire design)	-	1000	10% discount offered to sample received from BIS.
Cl-20.3(Accidentally Broken Lamps)	-	0	-
Cl-4(General Requirenents and General Test Requirements)	-	0	-
Cl-5(Marking)	-	0	-
Cl-6.1(Cap Interchangeability)	-	0	-
Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder)	-	0	-
Cl-7(Protection Against Accidental Contact with live parts)	-	0	-
Cl-8.1(Insulation resistance and electric strength)	-	0	-
Cl-8.2(Insulation Resistance lamp)	-	0	-
Cl-8.3(Electric Strength)	-	0	-
Cl-9.1(Mechanical Strength Requirements)	-	0	-
Cl-9.2.1(Torsion Resistance of Unused Lamps)	-	0	-
Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage)	-	0	-
Cl-9.2.3(Externally Applied Axial Pull and Bending Moment)	-	0	-
Cl-9.3(Axial Strength of Edison Caps)	-	0	-
Cl-10(Cap Temperature Rise)	-	0	-
Cl-11(Resistance to Heat)	-	0	-
Cl-12(Resistance to Flame and Ignition)	-	0	-
Cl-13.1(Fault Conditions- General Requirements)	-	0	-
Cl-14(Creepage Distance and Clearances)	-	0	-
Cl-15(Abnormal Operation)	-	0	-
Cl-16(Test Conditions for Dimmable Lamps)	-	0	-
Cl-18(Ingress Protection Requirements)	-	0	-
Cl-19(Information for luminaire design)	-	0	-
Cl-20.3(Accidentally Broken Lamps)	-	0	-

27 Apr, 2029

-
Included w.e.f 07.08.2026 Exclusions: Cl-17.1 (UV Radiation) Cl-17.2 (Blue Light Hazard)

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Charging procedure for test purposes)	-	25000	15% discount offered to samples received from BIS.
7.2(Intended Use)	-	110000	15% discount offered to samples received from BIS.
7.3(Reasonably foreseeable misuse)	-	100000	15% discount offered to samples received from BIS.
8.2(Small Cell and battery safety information)	-	30000	15% discount offered to samples received from BIS.
9.3(Caution for ingestion of small cells and batteries)	-	7500	15% discount offered to samples received from BIS.
7(Specific requirements and tests)	-	0	Not Applicable.
4(Parameter Measurement Tolerances)	-	0	Not Applicable.
5(General Safety Considerations)	-	0	Not Applicable.
5.1(General)	-	0	Not Applicable.
5.3(Venting)	-	0	Not Applicable.
5.4(Temperature, Voltage and Current Management)	-	0	Not Applicable.
5.5(Terminal Contacts)	-	0	Not Applicable.
5.6(Assembly of Cells into batteries)	-	0	Not Applicable.
5.7(Quality Plan)	-	0	Not Applicable.
5.8(Battery Safety Components)	-	0	Not Applicable.
6(Type Test and Sample Size)	-	0	Not Applicable.
8(Information for safety)	-	0	Not Applicable.
8.1(General)	-	0	Not Applicable.
9(Marking)	-	0	Not Applicable.
9.1(Cell Marking)	-	0	Not Applicable.
9.2(Battery Marking)	-	0	Not Applicable.
9.4(Other information)	-	0	Not Applicable.
10(Packaging)	-	0	Not Applicable.
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	25000	15% discount offered to samples received from BIS.

27 Apr, 2029

-
-

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

318000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	10000	10% discount offered to samples received from BIS.
Clause 4.3(Specifications)	-	5000	10% discount offered to samples received from BIS.
Clause 4.5(Safety Requirements)	-	126000	10% discount offered to samples received from BIS.
Clause 5(Marking)	-	2000	10% discount offered to samples received from BIS.
Clause 6(Operating Life Test)	-	20000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) a)(Hardware specification)	-	3000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) g)(Teletext)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) h)(Multi-language support)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) n)(Data services)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) p)(OSD)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) s)(Time)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, i) t)(Digital TV output)	-	2000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, i) b)(Frequency)	-	1000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, i) a)(Input voltage range)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) c)(Network evolution)	-	2000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) d)(Services available)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	2000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) k)(RF input signal)	-	3000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	3000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) p)(LNB Control)	-	2000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, vii)(DisEqC)	-	2000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	1000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, ix)(Operating humidity range)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, v) a)(Remote Control)	-	1000	10% discount offered to samples received from BIS.
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	1000	10% discount offered to samples received from BIS.
Clause 3.1, Table-1, v) c)(Support package)	-	1000	10% discount offered to samples received from BIS.
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	-	-
Clause 4.3(Specifications)	-	-	-
Clause 4.5(Safety Requirements)	-	-	-
Clause 5(Marking)	-	-	-
Clause 6(Operating Life Test)	-	-	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	-	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	-	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	-	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	-	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	-	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	-	-
Clause 4.1, Table-1, i) g)(Teletext)	-	-	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	-	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	-	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	-	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	-	-
Clause 4.1, Table-1, i) n)(Data services)	-	-	-
Clause 4.1, Table-1, i) p)(OSD)	-	-	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	-	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	-	-
Clause 4.1, Table-1, i) s)(Time)	-	-	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	-	-
Clause 4.4, Table-2, i) b)(Frequency)	-	-	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	-	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	-	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	-	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	-	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	-	-
Clause 4.1, Table-1, ii) d)(Services available)	-	-	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	-	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	-	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	-	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	-	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	-	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	-	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	-	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	-	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	-	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	-	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	-	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	-	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	-	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	-	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	-	-
Clause 4.4, Table-2, v)(Symbol rate)	-	-	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	-	-
Clause 4.4, Table-2, vii)(DisEqC)	-	-	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	-	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	-	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	-	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	-	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	-	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	-	-
Clause 3.1, Table-1, v) c)(Support package)	-	-	-

27 Apr, 2029

-
-

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	400	10% discount offered to samples received from BIS.
Cl-4.2(Energy source classifications)	-	400	10% discount offered to samples received from BIS.
Cl-4.3(Protection against energy sources)	-	400	10% discount offered to samples received from BIS.
Cl-4.4(Safeguards)	-	400	10% discount offered to samples received from BIS.
Cl-4.5(Explosion)	-	400	10% discount offered to samples received from BIS.
Cl-4.6(Fixing of conductors and conductive parts)	-	400	10% discount offered to samples received from BIS.
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% discount offered to samples received from BIS.
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	10% discount offered to samples received from BIS.
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% discount offered to samples received from BIS.
Cl-4.10(Components requirements)	-	1000	10% discount offered to samples received from BIS.
Cl-5.1(General- Electrically-caused injury)	-	1000	10% discount offered to samples received from BIS.
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	10% discount offered to samples received from BIS.
Cl-5.3(Protection against electrical energy sources)	-	2000	10% discount offered to samples received from BIS.
Cl-5.4(Insulation materials and requirements)	-	10000	10% discount offered to samples received from BIS.
Cl-5.5(Components as safeguards)	-	750	10% discount offered to samples received from BIS.
Cl-5.6(Protective conductor)	-	750	10% discount offered to samples received from BIS.
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2000	10% discount offered to samples received from BIS.
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	2000	10% discount offered to samples received from BIS.
Cl-6.1(General- Electrically-caused fire)	-	1000	10% discount offered to samples received from BIS.
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% discount offered to samples received from BIS.
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% discount offered to samples received from BIS.
Cl-6.4(Safeguards against fire under single fault conditions)	-	2000	10% discount offered to samples received from BIS.
Cl-6.5(Internal and external wiring)	-	1000	10% discount offered to samples received from BIS.
Cl-7.1(General- Injury caused by hazardous substances)	-	0	Applied in Exclusion
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	Applied in Exclusion
Cl-7.3(Ozone exposure)	-	0	Applied in Exclusion
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	Applied in Exclusion
Cl-7.5(Use of instructional safeguards and instructions)	-	0	Applied in Exclusion
Cl-8.1(General- Mechanically-caused injury)	-	1000	10% discount offered to samples received from BIS.
Cl-8.2(Mechanical energy source classifications)	-	1000	10% discount offered to samples received from BIS.
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	10% discount offered to samples received from BIS.
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	10% discount offered to samples received from BIS.
Cl-8.5(Safeguards against moving parts)	-	1000	10% discount offered to samples received from BIS.
Cl-8.6(Stability of equipment)	-	2000	10% discount offered to samples received from BIS.
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	10% discount offered to samples received from BIS.
Cl-8.8(Handle strength)	-	1200	10% discount offered to samples received from BIS.
Cl-8.9(Wheels or casters attachment requirements)	-	1200	10% discount offered to samples received from BIS.
Cl-8.10(Carts, stands, and similar carriers)	-	1200	10% discount offered to samples received from BIS.
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	10% discount offered to samples received from BIS.
Cl-9.1(General-Thermal burn injury)	-	750	10% discount offered to samples received from BIS.
Cl-9.2(Thermal energy source classifications)	-	750	10% discount offered to samples received from BIS.
Cl-9.3(Touch temperature limits)	-	5000	10% discount offered to samples received from BIS.
Cl-9.4(Safeguards against thermal energy sources)	-	750	10% discount offered to samples received from BIS.
Cl-9.5(Requirements for safeguards)	-	750	10% discount offered to samples received from BIS.
Cl-9.6(Requirements for wireless power transmitters)	-	5000	10% discount offered to samples received from BIS.
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	750	10% discount offered to samples received from BIS.
Annex B-2(Normal operating conditions)	-	1200	10% discount offered to samples received from BIS.
Annex B-3(Simulated abnormal operating conditions)	-	1200	10% discount offered to samples received from BIS.
Annex B-4(Simulated single fault conditions)	-	1200	10% discount offered to samples received from BIS.
Annex D-1(Impulse test generators)	-	5000	10% discount offered to samples received from BIS.
Annex D-2(Antenna interface test generator)	-	5000	10% discount offered to samples received from BIS.
Annex E-1(Electrical energy source classification for audio signals)	-	750	10% discount offered to samples received from BIS.
Annex E-2(Audio signals used during test)	-	750	10% discount offered to samples received from BIS.
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	10% discount offered to samples received from BIS.
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	750	10% discount offered to samples received from BIS.
Annex F-2(Letter symbols and graphical symbols)	-	750	10% discount offered to samples received from BIS.
Annex F-3(Equipment markings)	-	750	10% discount offered to samples received from BIS.
Annex F-4(Instructions)	-	750	10% discount offered to samples received from BIS.
Annex F-5(Instructional safeguards)	-	750	10% discount offered to samples received from BIS.
Annex H-1(General- Criteria for telephone ringing signals)	-	750	10% discount offered to samples received from BIS.
Annex H-2(Method A)	-	1200	10% discount offered to samples received from BIS.
Annex H-3(Method B)	-	1200	10% discount offered to samples received from BIS.
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	Applied in Exclusion
Annex K-1(General- Safety interlocks)	-	0	Applied in Exclusion
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	Applied in Exclusion
Annex K-3(Inadvertent change of operating mode)	-	0	Applied in Exclusion
Annex K-4(Interlock safeguard override)	-	0	Applied in Exclusion
Annex K-5(Fail-safe)	-	0	Applied in Exclusion
Annex K-6(Mechanically operated safety interlocks)	-	0	Applied in Exclusion
Annex K-7(Interlock circuit isolation)	-	0	Applied in Exclusion
Annex L-1(General requirements)	-	300	10% discount offered to samples received from BIS.
Annex L-2(Permanently connected equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-3()	-	300	10% discount offered to samples received from BIS.
Annex L-4(Single-phase equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-5(Three-phase equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-6(Switches as disconnect devices)	-	300	10% discount offered to samples received from BIS.
Annex L-7(Plugs as disconnect devices)	-	300	10% discount offered to samples received from BIS.
Annex L-8(Multiple power sources)	-	300	10% discount offered to samples received from BIS.
Annex L-9(Compliance criteria)	-	300	10% discount offered to samples received from BIS.
Annex M-1(General requirements)	-	300	10% discount offered to samples received from BIS.
Annex M-2(Safety of batteries and their cells)	-	5000	10% discount offered to samples received from BIS.
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1200	10% discount offered to samples received from BIS.
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1200	10% discount offered to samples received from BIS.
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1200	10% discount offered to samples received from BIS.
Annex M-6(Safeguards against short-circuits)	-	750	10% discount offered to samples received from BIS.
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	1200	10% discount offered to samples received from BIS.
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	1200	10% discount offered to samples received from BIS.
Annex M-9(Preventing electrolyte spillage)	-	750	10% discount offered to samples received from BIS.
Annex N(Electrochemical potentials (V))	-	0	Applied in Exclusion
Annex O(Measurement of creepage distances and clearances)	-	750	10% discount offered to samples received from BIS.
Annex P-1(General-Safeguards against conductive objects)	-	750	10% discount offered to samples received from BIS.
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	750	10% discount offered to samples received from BIS.
Annex P-3(Safeguards against spillage of internal liquids)	-	750	10% discount offered to samples received from BIS.
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	Applied in Exclusion
Annex Q-1(Limited power source)	-	750	10% discount offered to samples received from BIS.
Annex Q-2(Test for external circuits – paired conductor cable)	-	750	10% discount offered to samples received from BIS.
Annex R(Limited short-circuit test)	-	0	Applied in Exclusion
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1200	10% discount offered to samples received from BIS.
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	750	10% discount offered to samples received from BIS.
Annex S-4(Flammability classification of materials)	-	0	Applied in Exclusion
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	2000	10% discount offered to samples received from BIS.
Annex T-1(General-Mechanical strength tests)	-	1000	10% discount offered to samples received from BIS.
Annex T-2(Steady force test, 10 N)	-	1000	10% discount offered to samples received from BIS.
Annex T-3(Steady force test, 30 N)	-	750	10% discount offered to samples received from BIS.
Annex T-5(Steady force test, 250 N)	-	2000	10% discount offered to samples received from BIS.
Annex T-6(Enclosure impact test)	-	1000	10% discount offered to samples received from BIS.
Annex T-7(Drop test)	-	1000	10% discount offered to samples received from BIS.
Annex T-8(Stress relief test)	-	3000	10% discount offered to samples received from BIS.
Annex T-9(Glass impact test)	-	1000	10% discount offered to samples received from BIS.
Annex T-10(Glass fragmentation test)	-	0	Applied in Exclusion
Annex T-11(Test for telescoping or rod antennas)	-	2000	10% discount offered to samples received from BIS.
Annex V-1(Accessible parts of equipment)	-	2000	10% discount offered to samples received from BIS.
Annex V-2(Accessible part criterion)	-	2000	10% discount offered to samples received from BIS.
Annex W(Comparison of terms introduced in this document)	-	300	10% discount offered to samples received from BIS.
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	700	10% discount offered to samples received from BIS.
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	10% discount offered to samples received from BIS.
Annex Y-4(Gaskets)	-	0	Applied in Exclusion
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	10% discount offered to samples received from BIS.
Annex T-4(Steady force test, 100 N)	-	750	10% discount offered to samples received from BIS.
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2000	10% discount offered to samples received from BIS.
Cl-4.1(General- materials, components)	-	0	Repeated
Cl-4.2(Energy source classifications)	-	0	Repeated
Cl-4.3(Protection against energy sources)	-	0	Repeated
Cl-4.4(Safeguards)	-	0	Repeated
Cl-4.5(Explosion)	-	0	Repeated
Cl-4.6(Fixing of conductors and conductive parts)	-	0	Repeated
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	Repeated
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	Repeated
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	Repeated
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.1(General- materials, components)	-	-	-
Cl-4.2(Energy source classifications)	-	-	-
Cl-4.3(Protection against energy sources)	-	-	-
Cl-4.4(Safeguards)	-	-	-
Cl-4.5(Explosion)	-	-	-
Cl-4.6(Fixing of conductors and conductive parts)	-	-	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	-	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	-	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	-	-
Cl-4.10(Components requirements)	-	-	-
Cl-5.1(General- Electrically-caused injury)	-	-	-
Cl-5.2(Classification and limits of electrical energy sources)	-	-	-
Cl-5.3(Protection against electrical energy sources)	-	-	-
Cl-5.4(Insulation materials and requirements)	-	-	-
Cl-5.5(Components as safeguards)	-	-	-
Cl-5.6(Protective conductor)	-	-	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	-	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	-	-
Cl-6.1(General- Electrically-caused fire)	-	-	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	-	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	-	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	-	-
Cl-6.5(Internal and external wiring)	-	-	-
Cl-8.1(General- Mechanically-caused injury)	-	-	-
Cl-8.2(Mechanical energy source classifications)	-	-	-
Cl-8.3(Safeguards against mechanical energy sources)	-	-	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	-	-
Cl-8.5(Safeguards against moving parts)	-	-	-
Cl-8.6(Stability of equipment)	-	-	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	-	-
Cl-8.8(Handle strength)	-	-	-
Cl-8.9(Wheels or casters attachment requirements)	-	-	-
Cl-8.10(Carts, stands, and similar carriers)	-	-	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	-	-
Cl-9.1(General-Thermal burn injury)	-	-	-
Cl-9.2(Thermal energy source classifications)	-	-	-
Cl-9.3(Touch temperature limits)	-	-	-
Cl-9.4(Safeguards against thermal energy sources)	-	-	-
Cl-9.5(Requirements for safeguards)	-	-	-
Cl-9.6(Requirements for wireless power transmitters)	-	-	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	-	-
Annex B-2(Normal operating conditions)	-	-	-
Annex B-3(Simulated abnormal operating conditions)	-	-	-
Annex B-4(Simulated single fault conditions)	-	-	-
Annex D-1(Impulse test generators)	-	-	-
Annex D-2(Antenna interface test generator)	-	-	-
Annex E-1(Electrical energy source classification for audio signals)	-	-	-
Annex E-2(Audio signals used during test)	-	-	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	-	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	-	-
Annex F-2(Letter symbols and graphical symbols)	-	-	-
Annex F-3(Equipment markings)	-	-	-
Annex F-4(Instructions)	-	-	-
Annex F-5(Instructional safeguards)	-	-	-
Annex H-1(General- Criteria for telephone ringing signals)	-	-	-
Annex H-2(Method A)	-	-	-
Annex H-3(Method B)	-	-	-
Annex L-1(General requirements)	-	-	-
Annex L-2(Permanently connected equipment)	-	-	-
Annex L-3()	-	-	-
Annex L-4(Single-phase equipment)	-	-	-
Annex L-5(Three-phase equipment)	-	-	-
Annex L-6(Switches as disconnect devices)	-	-	-
Annex L-7(Plugs as disconnect devices)	-	-	-
Annex L-8(Multiple power sources)	-	-	-
Annex L-9(Compliance criteria)	-	-	-
Annex M-1(General requirements)	-	-	-
Annex M-2(Safety of batteries and their cells)	-	-	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	-	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	-	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	-	-
Annex M-6(Safeguards against short-circuits)	-	-	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	-	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	-	-
Annex M-9(Preventing electrolyte spillage)	-	-	-
Annex O(Measurement of creepage distances and clearances)	-	-	-
Annex P-1(General-Safeguards against conductive objects)	-	-	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	-	-
Annex P-3(Safeguards against spillage of internal liquids)	-	-	-
Annex Q-1(Limited power source)	-	-	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	-	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	-	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	-	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	-	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	-	-
Annex T-1(General-Mechanical strength tests)	-	-	-
Annex T-2(Steady force test, 10 N)	-	-	-
Annex T-3(Steady force test, 30 N)	-	-	-
Annex T-5(Steady force test, 250 N)	-	-	-
Annex T-6(Enclosure impact test)	-	-	-
Annex T-7(Drop test)	-	-	-
Annex T-8(Stress relief test)	-	-	-
Annex T-9(Glass impact test)	-	-	-
Annex T-11(Test for telescoping or rod antennas)	-	-	-
Annex V-1(Accessible parts of equipment)	-	-	-
Annex V-2(Accessible part criterion)	-	-	-
Annex W(Comparison of terms introduced in this document)	-	-	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	-	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	-	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	-	-
Annex T-4(Steady force test, 100 N)	-	-	-

27 Apr, 2029

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	15% discount offered to samples received from BIS.
7.0(Marking and instructions)	-	1000	15% discount offered to samples received from BIS.
8.0(Protection against access to live part test)	-	2000	15% discount offered to samples received from BIS.
9.0(Starting of motor-operated appliances test)	-	0	This Clause is not Applicable.
10.0(Power Input and current test)	-	1000	15% discount offered to samples received from BIS.
11.0(Heating test)	-	3000	15% discount offered to samples received from BIS.
13.0(Leakage current and electric strength test)	-	4000	15% discount offered to samples received from BIS.
14.0(Transient voltages)	-	4000	15% discount offered to samples received from BIS.
15.0(Moisture Resistance)	-	3000	15% discount offered to samples received from BIS.
16.0(Leakage current and electric strength test)	-	5000	15% discount offered to samples received from BIS.
17.0(Overload protection of transformers test)	-	2000	15% discount offered to samples received from BIS.
18.0(Endurance test)	-	0	This Clause is not Applicable.
19.0(Abnormal Operations)	-	2000	15% discount offered to samples received from BIS.
20.0(Stability and Mechanical Hazards)	-	3000	15% discount offered to samples received from BIS.
21.0(Mechanical Strength)	-	2000	15% discount offered to samples received from BIS.
22.0(Construction verification related tests)	-	2000	15% discount offered to samples received from BIS.
23.0(Internal wiring)	-	2000	15% discount offered to samples received from BIS.
24.0(Components)	-	2000	15% discount offered to samples received from BIS.
25.0(Supply connections and External Flexible Cords)	-	1000	15% discount offered to samples received from BIS.
26.0(Terminal for External Conductors)	-	1000	15% discount offered to samples received from BIS.
27.0(Provision for Earthing)	-	1000	15% discount offered to samples received from BIS.
28.0(Screws and connections)	-	1000	15% discount offered to samples received from BIS.
29.0(Clearances and Creepage distances and solid insulation)	-	1000	15% discount offered to samples received from BIS.
30.0(Resistance to heat and fire)	-	3000	15% discount offered to samples received from BIS.
31.0(Resistance to rusting)	-	2000	15% discount offered to samples received from BIS.
4(General Requirements)	-	500	15% discount offered to samples received from BIS.
5(General condition for the tests)	-	500	15% discount offered to samples received from BIS.
6.0(Classification)	-	0	Repeated clause
7.0(Marking and instructions)	-	0	Repeated clause
8.0(Protection against access to live part test)	-	0	Repeated clause
9.0(Starting of motor-operated appliances test)	-	0	This clause is not applicable.
10.0(Power Input and current test)	-	0	Repeated clause
11.0(Heating test)	-	0	Repeated clause
13.0(Leakage current and electric strength test)	-	0	Repeated clause
14.0(Transient voltages)	-	0	Repeated clause
15.0(Moisture Resistance)	-	0	Repeated clause
16.0(Leakage current and electric strength test)	-	0	Repeated clause
17.0(Overload protection of transformers test)	-	0	Repeated clause
18.0(Endurance test)	-	0	This clause is not applicable.
19.0(Abnormal Operations)	-	0	Repeated clause
20.0(Stability and Mechanical Hazards)	-	0	Repeated clause
21.0(Mechanical Strength)	-	0	Repeated clause
22.0(Construction verification related tests)	-	0	Repeated clause
23.0(Internal wiring)	-	0	Repeated clause
24.0(Components)	-	0	Repeated clause
25.0(Supply connections and External Flexible Cords)	-	0	Repeated clause
26.0(Terminal for External Conductors)	-	0	Repeated clause
27.0(Provision for Earthing)	-	0	Repeated clause
28.0(Screws and connections)	-	0	Repeated clause
29.0(Clearances and Creepage distances and solid insulation)	-	0	Repeated clause
30.0(Resistance to heat and fire)	-	0	Repeated clause
31.0(Resistance to rusting)	-	0	Repeated clause
4(General Requirements)	-	0	Repeated clause
5(General condition for the tests)	-	0	Repeated clause

27 Apr, 2029

-
-

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	2000	15% discount offered to samples received from BIS.
4(GENERAL NOTES ON TESTS)	-	2000	15% discount offered to samples received from BIS.
5(RATING)	-	2000	15% discount offered to samples received from BIS.
6(CLASSIFICATION)	-	2000	15% discount offered to samples received from BIS.
7(MARKING)	-	5000	15% discount offered to samples received from BIS.
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	10000	15% discount offered to samples received from BIS.
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	10000	15% discount offered to samples received from BIS.
10(INPUT AND CURRENT)	-	5000	15% discount offered to samples received from BIS.
11(HEATING)	-	2000	15% discount offered to samples received from BIS.
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	5000	15% discount offered to samples received from BIS.
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	10000	15% discount offered to samples received from BIS.
15(MOISTURE RESISTANCE)	-	5000	15% discount offered to samples received from BIS.
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	5000	15% discount offered to samples received from BIS.
17(OVERLOAD PROTECTION)	-	5000	15% discount offered to samples received from BIS.
19(ABNORMAL OPERATION)	-	5000	15% discount offered to samples received from BIS.
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	15% discount offered to samples received from BIS.
21(MECHANICAL STRENGTH)	-	5000	15% discount offered to samples received from BIS.
22(CONSTRUCTION)	-	3000	15% discount offered to samples received from BIS.
23(INTERNAL WIRING)	-	2500	15% discount offered to samples received from BIS.
24(COMPONENTS)	-	2500	15% discount offered to samples received from BIS.
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	5000	15% discount offered to samples received from BIS.
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	15% discount offered to samples received from BIS.
27(PROVISION FOR EARTHING)	-	2000	15% discount offered to samples received from BIS.
28(SCREWS AND CONNECTIONS)	-	2000	15% discount offered to samples received from BIS.
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	15% discount offered to samples received from BIS.
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	15% discount offered to samples received from BIS.
31(RESISTANCE TO RUSTING)	-	2000	15% discount offered to samples received from BIS.
3(GENERAL REQUIREMENTS)	-	2000	15% discount offered to samples received from BIS.
4(GENERAL NOTES ON TESTS)	-	2000	15% discount offered to samples received from BIS.
5(RATING)	-	2000	15% discount offered to samples received from BIS.
6(CLASSIFICATION)	-	2000	15% discount offered to samples received from BIS.
7(MARKING)	-	5000	15% discount offered to samples received from BIS.
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	5000	15% discount offered to samples received from BIS.
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	5000	15% discount offered to samples received from BIS.
10(INPUT AND CURRENT)	-	5000	15% discount offered to samples received from BIS.
11(HEATING)	-	2000	15% discount offered to samples received from BIS.
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	5000	15% discount offered to samples received from BIS.
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	10000	15% discount offered to samples received from BIS.
15(MOISTURE RESISTANCE)	-	5000	15% discount offered to samples received from BIS.
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	5000	15% discount offered to samples received from BIS.
17(OVERLOAD PROTECTION)	-	5000	15% discount offered to samples received from BIS.
19(ABNORMAL OPERATION)	-	5000	15% discount offered to samples received from BIS.
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	15% discount offered to samples received from BIS.
21(MECHANICAL STRENGTH)	-	5000	15% discount offered to samples received from BIS.
22(CONSTRUCTION)	-	3000	15% discount offered to samples received from BIS.
23(INTERNAL WIRING)	-	2500	15% discount offered to samples received from BIS.
24(COMPONENTS)	-	2500	15% discount offered to samples received from BIS.
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	5000	15% discount offered to samples received from BIS.
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	15% discount offered to samples received from BIS.
27(PROVISION FOR EARTHING)	-	2000	15% discount offered to samples received from BIS.
28(SCREWS AND CONNECTIONS)	-	2000	15% discount offered to samples received from BIS.
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	15% discount offered to samples received from BIS.
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	15% discount offered to samples received from BIS.
31(RESISTANCE TO RUSTING)	-	2000	15% discount offered to samples received from BIS.
3(GENERAL REQUIREMENTS)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	0	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-

27 Apr, 2029

-
-

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

154000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.8(Temperature rise)	-	10000	15% discount offered to samples received from BIS.
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	15% discount offered to samples received from BIS.
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	10000	15% discount offered to samples received from BIS.
17(Over Load Protection of Transformers and associated circuits)	-	0	Repeated clause
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	5000	15% discount offered to samples received from BIS.
30.2(Glow Wire Test)	-	5000	15% discount offered to samples received from BIS.
30.1(Ball pressure test)	-	10000	15% discount offered to samples received from BIS.
29(clearance, creepage distances and solid insulation)	-	5000	15% discount offered to samples received from BIS.
28(Screw test and connections)	-	5000	15% discount offered to samples received from BIS.
27.1(Provision for Earthing, IS 302-1)	-	5000	15% discount offered to samples received from BIS.
26(Terminals for external conductors)	-	2000	15% discount offered to samples received from BIS.
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	15% discount offered to samples received from BIS.
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	10000	15% discount offered to samples received from BIS.
21.1(Mechanical Strength, IS 302-1)	-	5000	15% discount offered to samples received from BIS.
20.1(Stability & Mechanical Hazards, IS 302-1)	-	5000	15% discount offered to samples received from BIS.
19(Abnormal Operation)	-	20000	15% discount offered to samples received from BIS.
18(Endurance)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	15% discount offered to samples received from BIS.
16.2(Leakage Current (after Clause 15))	-	5000	15% discount offered to samples received from BIS.
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	5000	15% discount offered to samples received from BIS.
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	15% discount offered to samples received from BIS.
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	5000	15% discount offered to samples received from BIS.
13.3(Electric Strength at operating temperature)	-	2000	15% discount offered to samples received from BIS.
13.2(Leakage current at operating temperature)	-	3000	15% discount offered to samples received from BIS.
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	5000	15% discount offered to samples received from BIS.
10.1(Power input)	-	5000	15% discount offered to samples received from BIS.
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	1000	15% discount offered to samples received from BIS.
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	15% discount offered to samples received from BIS.
8.1.2(Protection against live parts in openings)	-	1000	15% discount offered to samples received from BIS.
8.1.1(Protection against live parts in all positions)	-	1000	15% discount offered to samples received from BIS.
7(Marking and instructions)	-	0	-
15.2(Moisture resistance)	-	0	Repeated subclause
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
12(Charging of metal-ion batteries)	-	10000	15% discount offered to samples received from BIS.
11.8(Temperature rise)	-	0	Repeated Entry
11.7(Duration corresponding)	-	0	Repeated Entry
11.6(Combined appliances)	-	0	Repeated Entry
11.5(Motor-operated appliances)	-	0	Repeated Entry
11.4(Heating appliances)	-	0	Repeated Entry
8.1.5(Live parts of built-in appliances)	-	0	Repeated Entry
18(Endurance)	-	0	Repeated Entry
17(Overload protection of transformers and associated circuits)	-	0	Repeated Entry
17(Over Load Protection of Transformers and associated circuits)	-	0	Repeated Entry
16(Leakage current and electric strength)	-	0	Repeated Entry
4(General requirement)	-	0	Repeated Entry
31(Resistance to Rusting)	-	0	Repeated Entry
30.2(Needle Flame Test)	-	0	Repeated Entry
30.2(Glow Wire Test)	-	0	Repeated Entry
30.1(Ball pressure test)	-	0	Repeated Entry
29(clearance, creepage distances and solid insulation)	-	0	Repeated Entry
28(Screw test and connections)	-	0	Repeated Entry
27.1(Provision for Earthing, IS 302-1)	-	0	Repeated Entry
26(Terminals for external conductors)	-	0	Repeated Entry
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Entry
24(Components)	-	0	Repeated Entry
23.1(Internal Wiring, IS 302-1)	-	0	Repeated Entry
22.1(Construction, IS 302-1)	-	0	Repeated Entry
21.1(Mechanical Strength, IS 302-1)	-	0	Repeated Entry
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	Repeated Entry
19(Abnormal Operation)	-	0	Repeated Entry
18(Endurance)	-	0	Repeated Entry
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Repeated Entry
16.2(Leakage Current (after Clause 15))	-	0	Repeated Entry
16.1(General)	-	0	Repeated Entry
16.0(General)	-	0	Repeated Entry
15.3(Humidity Test)	-	0	Repeated Entry
15.2(Spillage Test)	-	0	Repeated Entry
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Repeated Entry
15.0(Moisture resistance)	-	0	Repeated Entry
14(Transient Over Voltages)	-	0	Repeated Entry
13.3(Electric Strength at operating temperature)	-	0	Repeated Entry
13.2(Leakage current at operating temperature)	-	0	Repeated Entry
13(Leakage current and electric strength at operating temperature)	-	0	Repeated Entry
11.3(Heating)	-	0	Repeated Entry
11.2(General)	-	0	Repeated Entry
11.1(General)	-	0	Repeated Entry
10.2(Current input)	-	0	Repeated Entry
10.1(Power input)	-	0	Repeated Entry
9(Starting of motor operation test requirements and tests)	-	0	Repeated Entry
8.1.4(Protection against live parts against protective impedance)	-	0	Repeated Entry
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Repeated Entry
8.1.2(Protection against live parts in openings)	-	0	Repeated Entry
8.1.1(Protection against live parts in all positions)	-	0	Repeated Entry
7(Marking and instructions)	-	0	Repeated Entry
15.2(Moisture resistance)	-	0	Repeated Entry
19.17(Abnormal Operation, IS 302-1)	-	0	Repeated Entry
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Repeated Entry
21.2(Mechanical Strength, IS 302-1)	-	0	Repeated Entry
21.3(Mechanical Strength, IS 302-1)	-	0	Repeated Entry
22.5(Construction)	-	0	Repeated Entry
22.6(Construction, IS 302-1)	-	0	Repeated Entry
22.11(Construction, IS 302-1)	-	0	Repeated Entry
22.42(Construction)	-	0	Repeated Entry
23.3(Internal Wiring, IS 302-1)	-	0	Repeated Entry
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	Repeated Entry
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Entry
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Entry
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Entry
26.5(Terminals for external conductors)	-	0	Repeated Entry
27.5(Provision for Earthing, IS 302-1)	-	0	Repeated Entry
28.1(Screws and connections)	-	0	Repeated Entry
22.2(Construction, IS 302-1)	-	0	Repeated Entry
22.3(Construction, IS 302-1)	-	0	Repeated Entry
B.22.4(Construction, IS 302-1)	-	0	Repeated Entry
B.22.5(Construction, IS 302-1)	-	0	Repeated Entry
6(Classification- IS 302-1)	-	0	Repeated Entry
5(General conditions for the tests)	-	0	Repeated Entry
A.2(Earth continuity test)	-	0	Repeated Entry
Annex D(Thermal motor protectors)	-	0	Repeated Entry
12(Charging of metal-ion batteries)	-	0	Repeated Entry
Annex C(Ageing test on motors)	-	0	Repeated Entry
Annex C(Ageing test on motors)	-	0	Repeated Entry

27 Apr, 2029

-
-

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.3(Marking- IS 302-1)	-	0	Repeated sub clause.
7.4(Marking- IS 302-1)	-	0	Repeated sub clause.
7.6(Marking- IS 302-1)	-	0	Repeated sub clause.
7.7(Marking- IS 302-1)	-	0	Repeated sub clause.
7.8(Marking- IS 302-1)	-	0	Repeated sub clause.
7.11(Marking- IS 302-1)	-	0	Repeated sub clause.
7.12(Marking- IS 302-1)	-	0	Repeated sub clause.
7.13(Marking- IS 302-1)	-	0	Repeated sub clause.
7.14(Marking- IS 302-1)	-	0	Repeated sub clause.
7.15(Marking- IS 302-1)	-	0	Repeated sub clause.
7.101(Marking)	-	0	Repeated sub clause.
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
14(Transient Over Voltages, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	4000	-
15.2(Moisture Resistance, IS 302-1)	-	0	Repeated sub clause.
15.3(Moisture Resistance, IS 302-1)	-	0	Repeated sub clause.
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
19.4(Abnormal Operation, IS 302-1)	-	5000	-
19.4(Abnormal Operation, IS 302-1)	-	0	Repeated sub clause.
19.5(Abnormal Operation, IS 302-1)	-	0	Repeated sub clause.
19.5(Abnormal Operation, IS 302-1)	-	0	Repeated sub clause.
19.7(Abnormal Operation)	-	0	Repeated sub clause.
19.9(Abnormal Operation)	-	0	Repeated sub clause.
19.1(Abnormal Operation)	-	0	Repeated sub clause.
19.101(Abnormal Operation)	-	0	Repeated sub clause.
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Repeated sub clause.
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	0	Repeated sub clause.
21.101(Mechanical Strength, IS 302-2-3)	-	0	Repeated sub clause.
22(Construction, IS 302-1)	-	3000	-
22.101(Construction)	-	0	Repeated sub clause.
22.102(Construction)	-	0	Repeated sub clause.
22.103(Construction)	-	0	Repeated sub clause.
22.104(Construction)	-	0	Repeated sub clause.
22.105(Construction)	-	0	Repeated sub clause.
22.106(Construction)	-	0	Repeated sub clause.
22.107(Construction)	-	0	Repeated sub clause.
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.3(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.4(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.5(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.6(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.7(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.8(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.9(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.10(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
24.1(Components, IS 302-1)	-	2000	-
24.2(Components, IS 302-1)	-	0	Repeated sub clause.
24.4(Components, IS 302-1)	-	0	Repeated sub clause.
24.5(Components, IS 302-1)	-	0	Repeated sub clause.
24.6(Components, IS 302-1)	-	0	Repeated sub clause.
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
26(Terminals for External Conductors, IS 302-1)	-	0	Repeated sub clause.
27.1(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
27.3(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
27.4(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
27.5(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Repeated sub clause.
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	3000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	0	Repeated sub clause.
31(Resistance of Rusting, IS 302-1)	-	0	Repeated sub clause.
4(General requirement)	-	0	Repeated sub clause.
16(Leakage current and electric strength)	-	0	Repeated sub clause.
17(Overload protection of transformers and associated circuits)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	0	Repeated sub clause.
17(Overload protection of transformers and associated circuits)	-	0	Repeated sub clause.
19.11.4.1(Electrostatic discharges)	-	0	Repeated sub clause.
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	Repeated sub clause.
19(Abnormal operation)	-	0	Repeated clause.
25(Supply Connection and External Flexible Cords)	-	0	Repeated clause.
18(Endurance)	-	0	Repeated clause.

27 Apr, 2029

-
-

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

31350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	21350	15 % discount to BIS.
5.2(Message Readability)	-	10000	15 % discount to BIS.
6(Marking)	-	0	Not Applicable

27 Apr, 2029

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

154000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	0	Not Applicable
8.1.1(Protection against live parts in all positions)	-	2000	15% discount offered to samples received from BIS.
8.1.2(Protection against live parts in openings)	-	1000	15% discount offered to samples received from BIS.
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	15% discount offered to samples received from BIS.
8.1.4(Protection against live parts against protective impedance)	-	1000	15% discount offered to samples received from BIS.
9(Starting of motor operation test requirements and tests)	-	0	Not Applicable
10.1(Power input)	-	5000	15% discount offered to samples received from BIS.
10.2(Current input)	-	5000	15% discount offered to samples received from BIS.
11.1(General)	-	0	Not Applicable
11.2(General)	-	0	Not Applicable
11.3(Heating)	-	20000	Not Applicable
13.1(General)	-	0	Not Applicable
13.2(Leakage current at operating temperature)	-	3000	15% discount offered to samples received from BIS.
13.3(Electric Strength at operating temperature)	-	2000	Not Applicable
14(Transient Over Voltages)	-	5000	15% discount offered to samples received from BIS.
15.0(General)	-	0	Not Applicable
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	15% discount offered to samples received from BIS.
15.2(Spillage Test)	-	0	Not Applicable
15.3(Humidity Test)	-	5000	15% discount offered to samples received from BIS.
16.0(General)	-	0	Not Applicable
16.1(General)	-	0	15% discount offered to samples received from BIS.
16.2(Leakage Current (after Clause 15))	-	5000	15% discount offered to samples received from BIS.
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	Not Applicable
17(Over Load Protection of Transformers and associated circuits)	-	10000	15% discount offered to samples received from BIS.
18(Endurance Test requirements and tests)	-	0	Not Applicable
19(Abnormal Operation)	-	20000	15% discount offered to samples received from BIS.
20(Stability test)	-	5000	15% discount offered to samples received from BIS.
21(Mechanical Strength Test)	-	5000	15% discount offered to samples received from BIS.
22(Construction verification related test)	-	10000	15% discount offered to samples received from BIS.
23(General)	-	0	Not Applicable
24(Components)	-	0	Not Applicable
25(Supply connection and external flexible cords)	-	2000	15% discount offered to samples received from BIS.
26(Terminals for external conductors)	-	2000	15% discount offered to samples received from BIS.
27(Provision for earthing)	-	5000	15% discount offered to samples received from BIS.
28(Screw test and connections)	-	5000	15% discount offered to samples received from BIS.
29(clearance, creepage distances and solid insulation)	-	5000	15% discount offered to samples received from BIS.
30.1(Ball pressure test)	-	10000	15% discount offered to samples received from BIS.
30.2(Glow Wire Test)	-	5000	15% discount offered to samples received from BIS.
30.2(Needle Flame Test)	-	5000	15% discount offered to samples received from BIS.
31(Resistance to Rusting)	-	0	Not Applicable
32(Radiation Toxicity and Similar Hazards)	-	0	Not Applicable

27 Apr, 2029

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

15237 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	N/A
7(Marking and instructions)	-	0	Not Applicable
8(Protection against live parts)	-	500	15% discount offered to samples received from BIS.
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	Not Applicable
10(POWER INPUT AND CURRENT)	-	1000	15% discount offered to samples received from BIS.
11(HEATING)	-	2000	15% discount offered to samples received from BIS.
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	15% discount offered to samples received from BIS.
14(TRANSIENT OVERVOLTAGES)	-	500	15% discount offered to samples received from BIS.
15(MOISTURE RESISTANCE)	-	1000	15 % discount to BIS.
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	15 % discount to BIS.
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	15 % discount to BIS.
18(ENDURANCE)	-	0	Not Applicable
19(ABNORMAL OPERATION)	-	1500	15% discount offered to samples received from BIS.
20(STABILITY AND MECHANICAL HAZARDS)	-	500	15% discount offered to samples received from BIS.
21(MECHANICAL STRENGTH)	-	500	15 % discount to BIS.
22(CONSTRUCTION)	-	1000	15 % discount to BIS.
23(INTERNAL WIRING)	-	0	Not Applicable
24(COMPONENTS)	-	0	Not Applicable
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	15 % discount to BIS.
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	15% discount offered to samples received from BIS.
27(PROVISION FOR EARTHING)	-	500	15 % discount to BIS.
28(SCREWS AND CONNECTIONS)	-	500	15% discount offered to samples received from BIS.
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	15% discount offered to samples received from BIS.
30(RESISTANCE TO HEAT AND FIRE)	-	1737	15% discount offered to samples received from BIS.
31(RESISTANCE TO RUSTING)	-	0	Not Applicable
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	Not Applicable

27 Apr, 2029

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

104000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	0	-
7.0(Construction)	-	5000	15% discount offered to samples received from BIS.
8.0(Creepage Distance and Clearances)	-	5000	15% discount offered to samples received from BIS.
9.0(Provision for earthing)	-	5000	15% discount offered to samples received from BIS.
10.0(Terminals)	-	5000	15% discount offered to samples received from BIS.
11.0(External & Internal Wiring)	-	5000	15% discount offered to samples received from BIS.
12.0(Protection against electric shock)	-	5000	15% discount offered to samples received from BIS.
13.0(Endurance Tests and Thermal Tests)	-	20000	15% discount offered to samples received from BIS.
14.0(Resistance to Dust & Moisture)	-	14000	15% discount offered to samples received from BIS.
15.0(Insulation Resistance and Electric Strength)	-	10000	15% discount offered to samples received from BIS.
16.0(Resistance to Heat , fire and tracking)	-	20000	15% discount offered to samples received from BIS.
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
17.0(Photometric Test)	-	10000	15% discount offered to samples received from BIS.

27 Apr, 2029

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

68800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	0	-
7(Construction)	-	3000	15% discount offered to samples received from BIS.
8(Creepage Distance and Clearances)	-	3000	15% discount offered to samples received from BIS.
9(Provision for earthing)	-	3008	15% discount offered to samples received from BIS.
10(Terminals)	-	3000	15% discount offered to samples received from BIS.
11(External & Internal Wiring)	-	3000	15% discount offered to samples received from BIS.
12(Protection against electric shock)	-	7000	15% discount offered to samples received from BIS.
13(Endurance Tests and Thermal Tests)	-	19000	15% discount offered to samples received from BIS.
14(Resistance to Dust and Moisture)	-	8000	15% discount offered to samples received from BIS.
15(Insulation Resistance and Electric Strength)	-	5000	15% discount offered to samples received from BIS.
16(Resistance to Heat , fire and tracking)	-	5000	15% discount offered to samples received from BIS.
17(Photometric Test)	-	9800	15% discount offered to samples received from BIS.
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-

27 Apr, 2029

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

104000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	0	-
7.0(Construction)	-	5000	15% discount offered to samples received from BIS.
8.0(Creepage Distance and Clearances)	-	5000	15% discount offered to samples received from BIS.
9.0(Provision for earthing)	-	5000	15% discount offered to samples received from BIS.
10.0(Terminals)	-	5000	15% discount offered to samples received from BIS.
11.0(External & Internal Wiring)	-	5000	15% discount offered to samples received from BIS.
12.0(Protection against electric shock)	-	10000	15% discount offered to samples received from BIS.
13.0(Endurance Tests and Thermal Tests)	-	25000	15% discount offered to samples received from BIS.
14.0(Resistance to Dust & Moisture)	-	14000	15% discount offered to samples received from BIS.
15.0(Insulation Resistance and Electric Strength)	-	10000	15% discount offered to samples received from BIS.
16.0(Resistance to Heat , fire and tracking)	-	10000	15% discount offered to samples received from BIS.
17.0(Photometric Test)	-	10000	15% discount offered to samples received from BIS.
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-

27 Apr, 2029

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	0	-
8(Protection against accidental contact with live parts)	-	10000	15% discount offered to samples received from BIS.
9(Terminals)	-	10000	15% discount offered to samples received from BIS.
10(PROVISION FOR EARTHING)	-	10000	15% discount offered to samples received from BIS.
11(MOISTURE RESISTANCE)	-	20000	15% discount offered to samples received from BIS.
12(Electric Strength)	-	7000	15% discount offered to samples received from BIS.
14(Fault conditions)	-	35000	15% discount offered to samples received from BIS.
15(Transformer heating)	-	30000	15% discount offered to samples received from BIS.
17(Creepage distance and clearances)	-	6500	15% discount offered to samples received from BIS.
18(Screws, current carrying parts and connections)	-	6500	15% discount offered to samples received from BIS.
19(Resistance to heat, fire and tracking)	-	25000	15% discount offered to samples received from BIS.
20(Resistance to corrosion)	-	25000	15% discount offered to samples received from BIS.
13(Thermal endurance test for winding of ballasts)	-	0	-
16(Construction)	-	0	-

27 Apr, 2029

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

43875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	0	-
6(Interchangeability)	-	5000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
7(Protection against accidental contact with live parts)	-	2000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
8(Insulation Resistance and Electric Strength)	-	8000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
9(MECHANICAL STRENGTH)	-	2000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
10(cap temperature)	-	5000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
11(Resistance to Heat)	-	4000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
12(Resistance to Flame and Ignition)	-	4000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
13(Fault conditions)	-	8000	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.
14(Creepage distance and clearances)	-	5875	15% discount offered to samples received from BIS. Restricted to Cap typ B22d,E27 & E14 only.

27 Apr, 2029

-
-

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	0	-
8(Terminals)	-	2000	15% discount offered to samples received from BIS.
9(PROVISION FOR EARTHING)	-	2000	15% discount offered to samples received from BIS.
10(Protection against accidental contact with live parts)	-	3000	15% discount offered to samples received from BIS.
11(Mositure Resistance and Insulation)	-	6000	15% discount offered to samples received from BIS.
12(Electric Strength)	-	3000	15% discount offered to samples received from BIS.
13(Fault conditions)	-	7000	15% discount offered to samples received from BIS.
15(Construction)	-	2500	15% discount offered to samples received from BIS.
16(Creepage distance and clearances)	-	2000	15% discount offered to samples received from BIS.
17(Screws, current carrying parts and connections)	-	2000	15% discount offered to samples received from BIS.
18(Resistance to heat, fire and tracking)	-	5000	15% discount offered to samples received from BIS.
19(Resistance to corrosion)	-	3000	15% discount offered to samples received from BIS.

27 Apr, 2029

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

68800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	0	-
7.0(Construction)	-	3000	15% discount offered to samples received from BIS.
8.0(Creepage Distance and Clearances)	-	3000	15% discount offered to samples received from BIS.
9.0(Provision for earthing)	-	3000	15% discount offered to samples received from BIS.
10.0(Terminals)	-	3000	15% discount offered to samples received from BIS.
11.0(External & Internal Wiring)	-	3000	15% discount offered to samples received from BIS.
12.0(Protection against electric shock)	-	8000	15% discount offered to samples received from BIS.
13.0(Endurance Tests and Thermal Tests)	-	15000	15% discount offered to samples received from BIS.
14.0(Resistance to Dust & Moisture)	-	8000	15% discount offered to samples received from BIS.
15.0(Insulation Resistance and Electric Strength)	-	7000	15% discount offered to samples received from BIS.
16.0(Resistance to Heat , fire and tracking)	-	7000	15% discount offered to samples received from BIS.
17.0(Photometric Test)	-	8800	15% discount offered to samples received from BIS.
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-

27 Apr, 2029

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

87879 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	0	N/A
7.0(Construction)	-	4000	15% discount offered to samples received from BIS.
8.0(Creepage Distance and Clearances)	-	4000	15% discount offered to samples received from BIS.
9.0(Provision for earthing)	-	4000	15% discount offered to samples received from BIS.
10.0(Terminals)	-	4000	15% discount offered to samples received from BIS.
11.0(External & Internal Wiring)	-	4000	15% discount offered to samples received from BIS.
12.0(Protection against electric shock)	-	8000	15% discount offered to samples received from BIS.
13.0(Endurance Tests and Thermal Tests)	-	22000	15% discount offered to samples received from BIS.
14.0(Resistance to Dust & Moisture)	-	11879	15% discount offered to samples received from BIS.
15.0(Insulation Resistance and Electric Strength)	-	8000	15% discount offered to samples received from BIS.
16.0(Resistance to Heat , fire and tracking)	-	18000	15% discount offered to samples received from BIS.
8.2(Packing -Each Package shall bear the following Particulars)	-	0	N/A
4(General Test Requireements)	-	0	N/A
5(Classification of Luminaires')	-	0	N/A

27 Apr, 2029

-
-

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

1788150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	22500	15% discount offered to samples received from BIS.
8.2(Endurance test)	-	638150	15% discount offered to samples received from BIS.
8.3(Charge retention test)	-	270000	15% discount offered to samples received from BIS.
8.4(Cycle endurance in Photovoltaic application)	-	750000	15% discount offered to samples received from BIS.
8.5(Sulphation Test)	-	70000	15% discount offered to samples received from BIS.
8.6(Water loss test)	-	37500	15% discount offered to samples received from BIS.
4(Condition of use)	-	0	Not Applicable.
5.1(Mechanical Endurance)	-	0	Not Applicable.
5.2(Charge efficiency)	-	0	Not Applicable.
5.3(Deep discharge protection)	-	0	Not Applicable.
5.4(Marking)	-	0	Not Applicable.
5.5(Dafety)	-	0	Not Applicable.
5.6(Documentation)	-	0	Not Applicable.
6(Finctional Characteristics)	-	0	Not Applicable.
7(General test conditions)	-	0	Not Applicable.
8.7(Non spillability)	-	0	Not Applicable.

27 Apr, 2029

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

170000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	15% discount offered to samples received from BIS.
6(Hazardous radiations)	-	0	Not Applicable
7(Heating under normal operating conditions)	-	25000	15% discount offered to samples received from BIS.
8(Constructional requirements with regard to the protection against electric shock)	-	10000	15% discount offered to samples received from BIS.
9(Electric shock hazard under normal operating conditions)	-	10000	15% discount offered to samples received from BIS.
10(Insulation requirements)	-	25000	15% discount offered to samples received from BIS.
11(Fault conditions)	-	15000	15% discount offered to samples received from BIS.
12(Mechanical strength)	-	38000	15% discount offered to samples received from BIS.
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	15% discount offered to samples received from BIS.
15(TERMINALS)	-	5000	15% discount offered to samples received from BIS.
16(External flexible cords)	-	5000	15% discount offered to samples received from BIS.
17(Electrical connections and mechanical fixings)	-	5000	15% discount offered to samples received from BIS.
19(Stability and mechanical hazards)	-	10000	15% discount offered to samples received from BIS.
20(Resistance to fire)	-	5000	15% discount offered to samples received from BIS.
14(Components)	-	0	15% discount offered to samples received from BIS.

27 Apr, 2029

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

56625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	0	-
20.7(Construction)	-	3000	15% discount offered to samples received from BIS.
20.8(Creepage Distance and Clearances)	-	3000	15% discount offered to samples received from BIS.
20.9(Provision for earthing)	-	3000	15% discount offered to samples received from BIS.
20.10(Terminals)	-	3000	15% discount offered to samples received from BIS.
20.11(External & Internal Wiring)	-	3000	15% discount offered to samples received from BIS.
20.12(Protection against electric shock)	-	6000	15% discount offered to samples received from BIS.
20.13(Endurance Tests and Thermal Tests)	-	12000	15% discount offered to samples received from BIS.
20.14(Resistance to Dust & Moisture)	-	8000	15% discount offered to samples received from BIS.
20.15(Insulation Resistance and Electric Strength)	-	6000	15% discount offered to samples received from BIS.
20.16(Resistance to Heat , fire and tracking)	-	9625	15% discount offered to samples received from BIS.
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	0	-

27 Apr, 2029

-
-

IS 16046 : Part 1 (2018)

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Charging procedure for test purposes)	-	25000	15% discount offered to samples received from BIS.
7.2(Intended Use)	-	110000	15% discount offered to samples received from BIS.
7.3(Reasonably foreseeable misuse)	-	100000	15% discount offered to samples received from BIS.
5.2(Insulation and Wiring)	-	2500	15% discount offered to samples received from BIS.
8.2(Small Cell and battery safety information)	-	30000	15% discount offered to samples received from BIS.
9.3(Caution for ingestion of small cells and batteries)	-	7500	15% discount offered to samples received from BIS.
4(Parameter Measurement Tolerances)	-	0	Not Applicable
5(General Safety Considerations)	-	0	Not Applicable
5.1(General)	-	0	Not Applicable
5.3(Venting)	-	0	Not Applicable
5.4(Temperature, Voltage and Current Management)	-	0	Not Applicable
5.5(Terminal Contacts)	-	0	Not Applicable
5.6(Assembly of Cells into batteries)	-	0	Not Applicable
5.7(Quality Plan)	-	0	Not Applicable
7(Specific requirements and tests)	-	0	Not Applicable
8(Information for safety)	-	0	Not Applicable
8.1(General)	-	0	Not Applicable
9(Marking)	-	0	Not Applicable
9.1(Cell Marking)	-	0	Not Applicable
9.2(Battery Marking)	-	0	Not Applicable
9.4(Other information)	-	0	Not Applicable
10(Packaging)	-	0	Not Applicable
6(Tyoe Test amd Sample Size)	-	0	Not Applicable

27 Apr, 2029

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	5000	15% discount offered to samples received from BIS.
1.7(Markings and instructions)	-	2000	15% discount offered to samples received from BIS.
2.1(Protection from electric shock and energy hazards)	-	13000	15% discount offered to samples received from BIS.
2.2(SELV circuits)	-	3000	15% discount offered to samples received from BIS.
2.3(TNV circuits)	-	2000	15% discount offered to samples received from BIS.
2.4(Limited current circuits)	-	3000	15% discount offered to samples received from BIS.
2.5(Limited power sources .)	-	3000	15% discount offered to samples received from BIS.
2.6(Provisions for earthing and bonding)	-	3000	15% discount offered to samples received from BIS.
2.7(Overcurrent and earth fault protection in primary circuits)	-	3000	15% discount offered to samples received from BIS.
2.9(Electrical insulation)	-	17000	15% discount offered to samples received from BIS.
2.10(Clearances, creepage distances and distances through insulation)	-	11000	15% discount offered to samples received from BIS.
3.1(General)	-	0	Not Applicable.
3.2(Connection to a mains supply)	-	2000	15% discount offered to samples received from BIS.
3.3(Wiring terminals for connection of external conductors)	-	2000	15% discount offered to samples received from BIS.
3.4(Disconnection from the mains supply)	-	2000	15% discount offered to samples received from BIS.
3.5(Interconnection of equipment)	-	3000	15% discount offered to samples received from BIS.
4.1(Stability)	-	2000	15% discount offered to samples received from BIS.
4.2(Mechanical strength)	-	14000	15% discount offered to samples received from BIS.
4.3(Design and construction)	-	12000	15% discount offered to samples received from BIS.
4.4(Protection against hazardous moving parts)	-	3000	15% discount offered to samples received from BIS.
4.5(Thermal requirements)	-	25000	15% discount offered to samples received from BIS.
4.6(Openings in enclosures)	-	2000	15% discount offered to samples received from BIS.
4.7(Resistance to fire)	-	5000	15% discount offered to samples received from BIS.
5.1(Touch current and protective conductor curren)	-	5000	15% discount offered to samples received from BIS.
5.2(Electric strength)	-	5000	15% discount offered to samples received from BIS.
5.3(Abnormal operating and fault conditions)	-	15000	15% discount offered to samples received from BIS.
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	15% discount offered to samples received from BIS.
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	15% discount offered to samples received from BIS.
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	15% discount offered to samples received from BIS.
7.1(General)	-	0	Not Applicable.
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2000	15% discount offered to samples received from BIS.
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	15% discount offered to samples received from BIS.
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	15% discount offered to samples received from BIS.
1.5(Components)	-	0	Not Applicable
2.8(Safety interlocks)	-	0	Not Applicable.

27 Apr, 2029

-
-

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

167000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	400	10% discount offered to samples received from BIS.
Cl-4.2(Energy source classifications)	-	400	10% discount offered to samples received from BIS.
Cl-4.3(Protection against energy sources)	-	400	10% discount offered to samples received from BIS.
Cl-4.4(Safeguards)	-	400	10% discount offered to samples received from BIS.
Cl-4.5(Explosion)	-	400	10% discount offered to samples received from BIS.
Cl-4.6(Fixing of conductors and conductive parts)	-	400	10% discount offered to samples received from BIS.
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% discount offered to samples received from BIS.
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	10% discount offered to samples received from BIS.
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% discount offered to samples received from BIS.
Cl-4.10(Components requirements)	-	1000	10% discount offered to samples received from BIS.
Cl-5.1(General- Electrically-caused injury)	-	1000	10% discount offered to samples received from BIS.
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	10% discount offered to samples received from BIS.
Cl-5.3(Protection against electrical energy sources)	-	2000	10% discount offered to samples received from BIS.
Cl-5.4(Insulation materials and requirements)	-	10000	10% discount offered to samples received from BIS.
Cl-5.5(Components as safeguards)	-	750	10% discount offered to samples received from BIS.
Cl-5.6(Protective conductor)	-	750	10% discount offered to samples received from BIS.
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2000	10% discount offered to samples received from BIS.
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	2000	10% discount offered to samples received from BIS.
Cl-6.1(General- Electrically-caused fire)	-	1000	10% discount offered to samples received from BIS.
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% discount offered to samples received from BIS.
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% discount offered to samples received from BIS.
Cl-6.4(Safeguards against fire under single fault conditions)	-	2000	10% discount offered to samples received from BIS.
Cl-6.5(Internal and external wiring)	-	1000	10% discount offered to samples received from BIS.
Cl-7.1(General- Injury caused by hazardous substances)	-	0	Applied in Exclusion
Cl-7.2(Reduction of exposure to hazardous substances)	-	500	10% discount offered to samples received from BIS.
Cl-7.3(Ozone exposure)	-	500	10% discount offered to samples received from BIS.
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	500	10% discount offered to samples received from BIS.
Cl-7.5(Use of instructional safeguards and instructions)	-	500	10% discount offered to samples received from BIS.
Cl-8.1(General- Mechanically-caused injury)	-	1000	10% discount offered to samples received from BIS.
Cl-8.2(Mechanical energy source classifications)	-	1000	10% discount offered to samples received from BIS.
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	10% discount offered to samples received from BIS.
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	10% discount offered to samples received from BIS.
Cl-8.5(Safeguards against moving parts)	-	1000	10% discount offered to samples received from BIS.
Cl-8.6(Stability of equipment)	-	2000	10% discount offered to samples received from BIS.
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	10% discount offered to samples received from BIS.
Cl-8.8(Handle strength)	-	1200	10% discount offered to samples received from BIS.
Cl-8.9(Wheels or casters attachment requirements)	-	1200	10% discount offered to samples received from BIS.
Cl-8.10(Carts, stands, and similar carriers)	-	1200	10% discount offered to samples received from BIS.
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	10% discount offered to samples received from BIS.
Cl-9.1(General-Thermal burn injury)	-	750	10% discount offered to samples received from BIS.
Cl-9.2(Thermal energy source classifications)	-	750	10% discount offered to samples received from BIS.
Cl-9.3(Touch temperature limits)	-	5000	10% discount offered to samples received from BIS.
Cl-9.4(Safeguards against thermal energy sources)	-	750	10% discount offered to samples received from BIS.
Cl-9.5(Requirements for safeguards)	-	750	10% discount offered to samples received from BIS.
Cl-9.6(Requirements for wireless power transmitters)	-	5000	10% discount offered to samples received from BIS.
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	750	10% discount offered to samples received from BIS.
Annex B-2(Normal operating conditions)	-	1200	10% discount offered to samples received from BIS.
Annex B-3(Simulated abnormal operating conditions)	-	1200	10% discount offered to samples received from BIS.
Annex B-4(Simulated single fault conditions)	-	1200	10% discount offered to samples received from BIS.
Annex D-1(Impulse test generators)	-	5000	10% discount offered to samples received from BIS.
Annex D-2(Antenna interface test generator)	-	5000	10% discount offered to samples received from BIS.
Annex E-1(Electrical energy source classification for audio signals)	-	750	10% discount offered to samples received from BIS.
Annex E-2(Audio signals used during test)	-	750	10% discount offered to samples received from BIS.
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	10% discount offered to samples received from BIS.
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	750	10% discount offered to samples received from BIS.
Annex F-2(Letter symbols and graphical symbols)	-	750	10% discount offered to samples received from BIS.
Annex F-3(Equipment markings)	-	750	10% discount offered to samples received from BIS.
Annex F-4(Instructions)	-	750	10% discount offered to samples received from BIS.
Annex F-5(Instructional safeguards)	-	750	10% discount offered to samples received from BIS.
Annex H-1(General- Criteria for telephone ringing signals)	-	750	10% discount offered to samples received from BIS.
Annex H-2(Method A)	-	1200	10% discount offered to samples received from BIS.
Annex H-3(Method B)	-	1200	10% discount offered to samples received from BIS.
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	Applied in Exclusion
Annex K-1(General- Safety interlocks)	-	500	10% discount offered to samples received from BIS.
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	10% discount offered to samples received from BIS.
Annex K-3(Inadvertent change of operating mode)	-	500	10% discount offered to samples received from BIS.
Annex K-4(Interlock safeguard override)	-	500	10% discount offered to samples received from BIS.
Annex K-5(Fail-safe)	-	500	10% discount offered to samples received from BIS.
Annex K-6(Mechanically operated safety interlocks)	-	500	10% discount offered to samples received from BIS.
Annex K-7(Interlock circuit isolation)	-	500	10% discount offered to samples received from BIS.
Annex L-1(General requirements)	-	300	10% discount offered to samples received from BIS.
Annex L-2(Permanently connected equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-3()	-	300	10% discount offered to samples received from BIS.
Annex L-4(Single-phase equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-5(Three-phase equipment)	-	300	10% discount offered to samples received from BIS.
Annex L-6(Switches as disconnect devices)	-	300	10% discount offered to samples received from BIS.
Annex L-7(Plugs as disconnect devices)	-	300	10% discount offered to samples received from BIS.
Annex L-8(Multiple power sources)	-	300	10% discount offered to samples received from BIS.
Annex L-9(Compliance criteria)	-	300	10% discount offered to samples received from BIS.
Annex M-1(General requirements)	-	300	10% discount offered to samples received from BIS.
Annex M-2(Safety of batteries and their cells)	-	5000	10% discount offered to samples received from BIS.
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1200	10% discount offered to samples received from BIS.
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1200	10% discount offered to samples received from BIS.
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1200	10% discount offered to samples received from BIS.
Annex M-6(Safeguards against short-circuits)	-	750	10% discount offered to samples received from BIS.
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	1200	10% discount offered to samples received from BIS.
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	1200	10% discount offered to samples received from BIS.
Annex M-9(Preventing electrolyte spillage)	-	750	10% discount offered to samples received from BIS.
Annex N(Electrochemical potentials (V))	-	1000	10% discount offered to samples received from BIS.
Annex O(Measurement of creepage distances and clearances)	-	750	10% discount offered to samples received from BIS.
Annex P-1(General-Safeguards against conductive objects)	-	750	10% discount offered to samples received from BIS.
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	750	10% discount offered to samples received from BIS.
Annex P-3(Safeguards against spillage of internal liquids)	-	750	10% discount offered to samples received from BIS.
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	10% discount offered to samples received from BIS.
Annex Q-1(Limited power source)	-	750	10% discount offered to samples received from BIS.
Annex Q-2(Test for external circuits – paired conductor cable)	-	750	10% discount offered to samples received from BIS.
Annex R(Limited short-circuit test)	-	0	Applied in Exclusion
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1200	10% discount offered to samples received from BIS.
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	750	10% discount offered to samples received from BIS.
Annex S-4(Flammability classification of materials)	-	0	Applied in Exclusion
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	2000	10% discount offered to samples received from BIS.
Annex T-1(General-Mechanical strength tests)	-	1000	10% discount offered to samples received from BIS.
Annex T-2(Steady force test, 10 N)	-	1000	10% discount offered to samples received from BIS.
Annex T-3(Steady force test, 30 N)	-	750	10% discount offered to samples received from BIS.
Annex T-5(Steady force test, 250 N)	-	2000	10% discount offered to samples received from BIS.
Annex T-6(Enclosure impact test)	-	1000	10% discount offered to samples received from BIS.
Annex T-7(Drop test)	-	1000	10% discount offered to samples received from BIS.
Annex T-8(Stress relief test)	-	3000	10% discount offered to samples received from BIS.
Annex T-9(Glass impact test)	-	1000	10% discount offered to samples received from BIS.
Annex T-10(Glass fragmentation test)	-	500	10% discount offered to samples received from BIS.
Annex T-11(Test for telescoping or rod antennas)	-	2000	10% discount offered to samples received from BIS.
Annex V-1(Accessible parts of equipment)	-	2000	10% discount offered to samples received from BIS.
Annex V-2(Accessible part criterion)	-	2000	10% discount offered to samples received from BIS.
Annex W(Comparison of terms introduced in this document)	-	300	10% discount offered to samples received from BIS.
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	700	10% discount offered to samples received from BIS.
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	10% discount offered to samples received from BIS.
Annex Y-4(Gaskets)	-	0	Applied in Exclusion
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	10% discount offered to samples received from BIS.
Annex T-4(Steady force test, 100 N)	-	750	10% discount offered to samples received from BIS.
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2000	10% discount offered to samples received from BIS.
Cl-4.1(General- materials, components)	-	0	Repeated
Cl-4.2(Energy source classifications)	-	0	Repeated
Cl-4.3(Protection against energy sources)	-	0	Repeated
Cl-4.4(Safeguards)	-	0	Repeated
Cl-4.5(Explosion)	-	0	Repeated
Cl-4.6(Fixing of conductors and conductive parts)	-	0	Repeated
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	Repeated
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	Repeated
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	Repeated
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	500	10% discount offered to samples received from BIS.
Annex G-6(Wire insulation)	-	2000	10% discount offered to samples received from BIS.
Annex J-2(Type tests)	-	1000	10% discount offered to samples received from BIS.
Annex Y-6(Mechanical strength of enclosures)	-	1000	10% discount offered to samples received from BIS.
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	Repeated Entry
Cl-7.3(Ozone exposure)	-	0	Repeated Entry
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	Repeated Entry
Cl-7.5(Use of instructional safeguards and instructions)	-	0	Repeated Entry
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.3(Ozone exposure)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.3(Ozone exposure)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Cl-4.1(General- materials, components)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	0	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex J-2(Type tests)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.3(Ozone exposure)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	0	-
Annex K-3(Inadvertent change of operating mode)	-	0	-
Annex K-4(Interlock safeguard override)	-	0	-
Annex K-5(Fail-safe)	-	0	-
Annex K-6(Mechanically operated safety interlocks)	-	0	-
Annex K-7(Interlock circuit isolation)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Annex D-3(Electronic pulse generator)	-	0	-
Annex G-1(Switches)	-	0	-
Annex G-2(Relays)	-	0	-
Annex G-3(Protective devices)	-	0	-
Annex G-5(Wound components)	-	0	-
Annex G-7(Mains power supply cords and interconnection cables)	-	0	-
Annex G-8(Varistors)	-	0	-
Annex G-9(Integrated circuit (IC) current limiters)	-	0	-
Annex G-10(Resistors)	-	0	-
Annex G-11(Capacitors and RC units)	-	0	-
Annex G-12(Optocouplers)	-	0	-
Annex G-13(Printed boards)	-	0	-
Annex G-14(Coatings on component terminals)	-	0	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	0	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	0	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	0	-
Annex J-3(Testing during manufacturing)	-	0	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	0	-
Annex S-4(Flammability classification of materials)	-	0	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex Y-2(Resistance to UV radiation)	-	0	-
Annex Y-3(Resistance to corrosion)	-	0	-
Annex A(Examples of equipment within the scope of this document)	-	0	-
Cl-7.1(General- Injury caused by hazardous substances)	-	0	-
Annex Y-4(Gaskets)	-	0	-
Annex R(Limited short-circuit test)	-	0	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	-

27 Apr, 2029

-
Included w.e.f 13.10.2025 Exclusion: Annex U ("Mechanical strength of CRTs and protection against the effects of implosion"), Cl-10.1 (General-Radiation), Cl-10.2 (Radiation energy source classifications), Cl-10.3 (Safeguards against laser radiation), Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)"), Cl-10.5 (Safeguards against X-radiation), Cl-10.6 (Safeguards against acoustic energy sources), Annex C-1 (Protection of materials in equipment from UV radiation), Annex C-2 (UV light conditioning test)

Bureau of Indian Standards

The National Standards Body of India

Intertek India Private Limited, New Delhi (E-26)

E-26, Block B-1, Mohan Co-Operative Industrial Estate, Mathura Road, Delhi, New Delhi, Delhi, 110044

9820213510 manas.das@intertek.com

Scope List