BIS - LIMS (Laboratory Information Management System)

AADISHAKTI TESTING &RESEARCH LABORATORIES LLP

GROUND & 1ST FLOOR FLOOR KILLA NO : 7//18(11-6), 19(3-2), 22(7-18) Shaadipur, Shanti Vihar Colony, Sonipat 131001, Behind MRF Showroom, SONIPAT, Sonipat, Haryana, 131001

8929775530 INFO.ATRLTESTINGLABS@GMAIL.COM

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

50-10000ML

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1500	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.3, 4.3(Material )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	1000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	2000	-
3.5.4, 4.5.3(Wall thickness)	-	1500	-
5(Marking )	-	1000	-

07 Aug, 2029

-
-

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

5ML TO 2000ML

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	500	-
Table-1(Overall height)	-	1000	-
Table-1(Distance from top of scale to top of cylinder)	-	1000	-
Table-1(Internal height to highest graduation line)	-	1000	-
Table-1(Sub-divisions)	-	500	-
Table-1(capacity at lowest graduation line)	-	1000	-
Cl-9.1(Wall thickness)	-	500	-
Cl-9.2(Stability)	-	500	-
Cl-9.3(Base)	-	300	-
Cl-9.4(Rim and spout)	-	300	-
Cl-9.5(Neck and stopper)	-	300	-
Cl-9.6, Table-2(Nominal capacity)	-	1000	-
Cl-9.6, Table-2(Overall height)	-	1000	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	500	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	500	-
Cl-9.6, Table-2(Sub divisions)	-	300	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	1000	-
Cl-10.1(Graduation)	-	500	-
Cl-10.2(Figuring)	-	500	-
Cl-11(Accuracy testing)	-	1000	-
Cl-13(Visibility of graduation lines, figures and marking)	-	1000	-
Clause. 8.0(Material)	-	1000	-
Table- 1(Max. Permissible Error (Class- a))	-	100	-
Table- 1(Max. Permissible Error (Class- b))	-	100	-
Table- 2(Max. Permissible Error (Type-2))	-	100	-

07 Aug, 2029

-
-

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

EMISSION CLASS E1,E2

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	100	-
Cl-4.2(Adhesive)	-	1000	-
Cl-5.1(Veneers)	-	100	-
Cl-5.2.1(Glueing)	-	100	-
Cl -5.2.2(Thickness of Veneers)	-	200	-
Cl - 5.2.3.1(Joint in Veneers)	-	100	-
Cl - 5.2.3.2(Edge joints)	-	100	-
Cl - 5.2.3.3(End joints)	-	100	-
Cl - 5.2.3.4(Scarf joints)	-	100	-
Cl - 5.2.4(Grain Direction)	-	100	-
Cl-5.3(Treatment)	-	100	-
Cl-5.4(Moisture Content)	-	1000	-
Cl-6.1(Dimensions (length))	-	200	-
Cl-6.2(Thickness)	-	200	-
Cl-6.3(Squareness)	-	200	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	200	-
Cl-9.3(Moisture Content)	-	1000	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1000	-
Cl-9.7(Mycological Test -Adhesion)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-9.10(Retention of Preservative)	-	1000	-
Cl-9.11(Formaldehyde Content Test)	-	2000	-
Cl-9.4.2(Adhesion of Plies)	-	1000	-
5.1.1(Defects in veneers)	-	100	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (ii) a((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (ii) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-6.1(Dimensions (width))	-	200	-
Cl-8.3(Edge Straightness)	-	200	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.6(Tensile Strength-Across the grain)	-	1500	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-	1500	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.1(Marking)	-	100	-
Cl-11.3(Marking)	-	100	-
Cl-9.5.2(Water Resistance Test)	-	1000	-

07 Aug, 2029

-
Except Steady-State Formaldehyde Emission test clause 9.12 of IS 710:2024

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR,BWR,BWP& EMMISSION CLASS E1,E2

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	500	-
Cl-6.2(Adhesive)	-	1000	-
Cl-7.2.1(Thickness of veneers)	-	1000	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	300	-
Cl-7.2.5.2(Splits)	-	300	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	250	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-9(WORKMANSHIP AND FINISH)	-	200	-
Cl-7.2.4(Scarf Joints)	-	100	-
Cl. 4(Grades)	-	100	-
Cl.5.1(Type based on classification by appearance)	-	100	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	100	-
Cl.8.1(Dimensions -width)	-	250	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	250	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	250	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-8.3(Edge Straightness)	-	250	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-13(Marking)	-	100	-
Cl-7.2.5.3(Overlap)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-

07 Aug, 2029

-
Except Steady-State Formaldehyde Emission test as per Clause 11.7 of IS 303:2024 with Amendment 1

IS 14587 (2025)

Prelaminated Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials - Specification ( Second Revision )

ALL GRADE

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	1000	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	1000	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	1500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	1500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	2500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1500	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1500	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1500	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1500	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	1500	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	1500	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	1500	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	1500	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	1500	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	1500	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	1500	-
As per Clause 4(Types of hyraulic door closers)	-	500	-
As per Clause 4.1 and Fig 1(A)/Fig 1(B)/Fig 1()C(Types of hyraulic door closers)	-	500	-
As per Clause 4.2 and Fig (2)and Fig(3)(Types of hyraulic door closers)	-	500	-
As per Clause 4.3(Types of hyraulic door closers)	-	500	-
As per Clause 5.1(Functional Controls Of Door Closers)	-	500	-
As per Clause 5.2(Functional Controls Of Door Closers)	-	500	-
As per Clause 5.3 and Fig 5(Functional Controls Of Door Closers)	-	500	-
As per Clause 5.4 and Fig 5(Functional Controls Of Door Closers)	-	500	-
As per Clause 5.5 and Fig 5(Functional Controls Of Door Closers)	-	500	-
As per Clause 6 And Table 1(Nominal Sizes)	-	500	-
As per Clause 7(Materials , Finish and Workmanship)	-	500	-
As per Clause 8.1(Classification Code)	-	500	-
As per Clause 8.2(Classification Code)	-	500	-
As per Clause 8.3(Classification Code)	-	500	-
As per Clause 8.4(Classification Code)	-	500	-
As per Clause 8.5(Classification Code)	-	500	-
As per Clause 8.6(Classification Code)	-	500	-
As per Clause 8.7(Classification Code)	-	500	-
As per Clause 9.1(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.2(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.3(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.4(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.5(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.6(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.7(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 9.8(PERFORMANCE REQUIREMENTS)	-	500	-
As per Clause 11(Marking)	-	500	-

07 Aug, 2029

-
Except Steady-State Formaldehyde Emission test (CI 9.1, Table 9) of IS 14587:2025

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	500	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1000	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1500	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1500	-
9.2.3(Adhesion of Plies - Annexure H)	-	750	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	500	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	1000	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	1000	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	500	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	500	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	500	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	500	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	500	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	1000	-
cl. 11(marking)	-	250	-
cl. 11.1(marking - BIS certification marking)	-	250	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	500	-
6.2(Core- Moisture & Width)	-	500	-
6.3(Cross Bands and Faces- Moisture content)	-	750	-
6.3.1(Thickness of cross band and face veneers)	-	750	-
Cl-7.1(Thickness)	-	500	-
Cl-7.2(Sizes)	-	500	-
Cl 9.2.6(Detection for Copper)	-	250	-
Cl 9.2.6(Detection for Chromium)	-	250	-
Cl 9.2.6(Detection for Arsenic)	-	250	-
Cl 9.2.6(Method for the detection of Boron in Borax: Boric Acid, CCB, BCCA)	-	250	-

07 Aug, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

AADISHAKTI TESTING &RESEARCH LABORATORIES LLP

GROUND & 1ST FLOOR FLOOR KILLA NO : 7//18(11-6), 19(3-2), 22(7-18) Shaadipur, Shanti Vihar Colony, Sonipat 131001, Behind MRF Showroom, SONIPAT, Sonipat, Haryana, 131001

8929775530 INFO.ATRLTESTINGLABS@GMAIL.COM

Scope List