BIS - LIMS (Laboratory Information Management System)

Quality Marking & Testing Laboratory, Indore

03, Pologround, Industrial Estate, Indore (M.P.), Indore, Indore, Madhya Pradesh, 452015

9425601159 contactqmtl@yahoo.in

Scope List

Reset

39 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress)	-	510	For each testFor each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength)	-	510	For each testFor each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength)	-	560	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	350	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	510	For each test
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	510	For each test
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Chromium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-B)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Chromium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 51000-A)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 40800)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19600)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	560	For each test
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	560	For each test

31 Jul, 2024

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	560	For each test.
Cl 9(Nominal Diameter & Out Of Shape)	-	560	For each test.
6.1(Carbon %)	-	560	For each test.
6.1(Manganese %)	-	560	For each test.
6.1(Phosphorus %)	-	560	For each test.
6.1(Sulphur %)	-	560	For each test.
6.1(Silicon %)	-	560	For each test.
6.1( Aluminium %)	-	560	For each test.

31 Jul, 2024

-
-

IS 1322 (1993)

Bitumen Felts for Water Proofing and Damp-proofing

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1 (Fibre Base)	-	560	For each test
3.1.2(Hessian Base)	-	560	For each test
4.1.1(Fibre base felt)	-	560	For each test
4.1.2(Hessian Base Fibre )	-	560	For each test
4.2.1(Composition)	-	560	-
4.2.2 & Table 1(Weight)	-	390	For each test
4.3.1 , 4.3.2& Table 1(Composition)	-	560	For each test
4.3.3, & Table 1(Weight )	-	390	For each test
5.4 & Table 1(Weight )	-	390	For each test
5.5(Free from external defects - IS 1322)	-	560	For each test
6(Dimension-IS 1322)	-	350	For each test
7.1(Breaking Strength test- IS 13826(Part 1))	-	510	For each test
7.1(Pliabilitry Test-IS 13826(Part 2))	-	560	For each test
7.1(Strage Sticking Test-IS 13826(Part 3))	-	560	For each test
7.1(Pressure Head Test-IS 13826(Part-4 )	-	560	For each test
7.1(Heat Resistance Test-IS 13826(Part 5))	-	560	For each test
7.1(Water Absorption Test-IS 13826(Part 6))	-	690	For each test

31 Jul, 2024

-
-

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

3500 View breakup
Rs.3500/- upto 7 wires and Rs.500/- for each additional wire

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	560	For each Test
7.1 Table-1(Dimensional measurement of wires)	-	560	For each Test
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	560	For each Test
8.1(Joints in wires-Conductors Containing Seven Wires)	-	560	For each Test
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	560	For each Test
9.1(Stranding)	-	560	For each Test
9.1(Stranding)	-	560	For each Test
9.2 Table 3(Lay Ratio of stranded conductors)	-	560	For each Test
9.2 Table 3(Lay Ratio of stranded conductors)	-	560	For each Test
9.3(Direction of Lay)	-	560	For each Test
9.3(Direction of Lay)	-	560	For each Test
9.4(Multiple layers of wires)	-	560	For each Test
9.4(Multiple layers of wires)	-	560	For each Test
11(Packing and Marking)	-	560	For each Test
11(Packing and Marking)	-	560	For each Test
12.2 Table 1(Breaking Load Test- Before Stranding)	-	560	For each Test
12.2 Table 1(Breaking Load Test- Before Stranding)	-	560	For each Test
12.2 Table 1(Breaking Load Test- After Stranding)	-	560	For each Test
12.2 Table 1(Breaking Load Test- After Stranding)	-	560	For each Test
12.3 Table 1(Elongation Test- Before Stranding)	-	560	For each Test
12.3 Table 1(Elongation Test- Before Stranding)	-	560	For each Test
12.3 Table 1(Elongation Test- After Stranding)	-	560	For each Test
12.3 Table 1(Elongation Test- After Stranding)	-	560	For each Test
12.4 Table 1(Resistance of Aluminium wire)	-	560	For each Test
12.4 Table 1(Resistance of Aluminium wire)	-	560	For each Test
9.2(Lay Ratio 24 wire layer)	-	560	For each Test
9.2(Lay Ratio 24 wire layer)	-	560	For each Test
9.2(Lay Ratio 18 wire layer)	-	560	For each Test
9.2(Lay Ratio 12 wire layer)	-	560	For each Test
9.2(Lay Ratio 12 wire layer)	-	560	For each Test
9.2(Lay Ratio 3/6 wire layer)	-	560	For each Test
9.2(Lay Ratio 3/6 wire layer)	-	560	For each Test

31 Jul, 2024

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

4500 View breakup
Arial Bunched cable-Rs.4500/-, For each additional core-Rs.1180/-, Maximum-Rs.7810/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	560	For each Test
4.2(Messenger (Neutral Conductor or Otherwise))	-	560	For each Test
6.1(Flexibility class)	-	560	For each Test
6.2(Compactness)	-	560	For each Test
6.2(No of strands)	-	560	For each Test
6.2(Surface)	-	560	For each Test
6.3(Protective barrier)	-	560	For each Test
6.4(size of street lighting conductor)	-	560	For each Test
6.5(Size of messenger conductor )	-	560	For each Test
6.6(Joints in messenger conductor )	-	560	For each Test
6.6(Direction of outer layer)	-	560	For each Test
7.1(Insulation)	-	560	For each Test
7.2( Thickness of insulation)	-	560	For each Test
7.3(Tolerance on thickness of insulation )	-	560	For each Test
7.4(Aplication of the insulation )	-	560	For each Test
7.5(Colour of the insulation )	-	560	For each Test
8.1(Core identification)	-	560	For each Test
8.2(Core identification)	-	560	For each Test
8.3(Identification by other means)	-	560	For each Test
9.1(Assembly (Laying up))	-	560	For each Test
9.2(Assembly (Laying up))	-	560	For each Test
9.3(Direction of lay)	-	560	For each Test
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	560	For each Test
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	560	For each Test
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	560	For each Test
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	560	For each Test
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	560	For each Test
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	560	For each Test
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	560	For each Test
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	560	For each Test
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	560	For each Test
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	560	For each Test
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	560	For each Test
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	560	For each Test
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	560	For each Test
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	560	For each Test
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	2440	For each Test
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	560	For each Test
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	560	For each Test
10.1 g)(High voltage test - IS10810:Part 45)	-	560	For each Test
11.4(Bending Test on the Completed Cable ( Optional) )	-	560	For each Test

31 Jul, 2024

-
For cables with XLPE insulation only

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

3500 View breakup
Rs.3500/- upto 7 wires and Rs.500/- for each additional wire

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	560	For each Test
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	560	For each Test
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	560	For each Test
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	560	For each Test
10 (elec)(Stranding)	-	560	For each Test
10 (elec)(Stranding)	-	560	For each Test
10 (elec)(Stranding)	-	560	For each Test
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	560	For each Test
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	560	For each Test
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	560	For each Test
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	560	For each Test
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	560	For each Test
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	560	For each Test
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	560	For each Test
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	560	For each Test
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	560	For each Test
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	560	For each Test
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	560	For each Test
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	560	For each Test
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	560	For each Test
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	560	For each Test
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	560	For each Test
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	560	For each Test
13.7.2 (chem)(Mass of Zinc coating)	-	2440	For each Test
13.7.2 (chem)(Uniformity of Zinc coating)	-	2440	For each Test
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	560	For each Test
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	560	For each Test
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	560	For each Test
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	560	For each Test

31 Jul, 2024

-
Facility up to 100 mm2

IS 1328 (1996)

Veneered Decorative Plywood -Specification

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	560	For each test.
4.1(Grade - For MR)	-	560	For each test.
4.2(Type - For Type 1)	-	560	For each test.
4.2(Type - For Type 2)	-	560	For each test.
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	560	For each test.
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	560	For each test.
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	560	For each test.
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	560	For each test.
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	560	For each test.
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	560	For each test.
8(Dimensions & Tolerances - Length - Cl. 8)	-	560	For each test.
8(Dimensions & Tolerances - Width - Cl. 8)	-	560	For each test.
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	560	For each test.
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	560	For each test.
8(Dimensions & Tolerances - Squareness - Annexure C)	-	560	For each test.
9(Finish - Cl. 9.1, 8.3)	-	560	For each test.
9(Finish - Cl. 9.2, 8.3)	-	560	For each test.
11(Tests - Moisture Content - Part 1 of IS 1734)	-	560	For each test.
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	560	For each test.
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	560	For each test.

31 Jul, 2024

-
-

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14 (a)(Marking)	-	560	For each Test
14 (b)(Marking)	-	560	For each Test
14 (c)(Marking)	-	560	For each Test
14 (d)(Marking)	-	560	For each Test
14 (e)(Marking)	-	560	For each Test
14 (f)(Marking)	-	560	For each Test
14 (g)(Marking)	-	560	For each Test
14.2(Marking)	-	560	For each Test
7(Dimensions)	-	560	For each Test
7(Dimensions)	-	560	For each Test
7(Dimensions)	-	560	For each Test
7(Dimensions)	-	560	For each Test
7(Dimensions)	-	560	For each Test
7(Dimensions)	-	560	For each Test
7(Dimensions)	-	560	For each Test
11(Freedom from defects)	-	560	For each Test
9.1(Galvanizing Requirements )	-	2440	For each Test
9.2(Galvanizing Requirements )	-	2440	For each Test
9.3(Galvanizing Requirements )	-	2440	For each Test
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	560	For each Test
8.2(Mechanical Properties (as per IS 1717))	-	560	For each Test
8.3(Mechanical Properties (as per IS 1755))	-	560	For each Test
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	560	For each Test
Clause 6.1, Table-1(Sulphur)	-	560	For each Test
Clause 6.1, Table-1(Phosphorus)	-	560	For each Test
6.2(Phosphorus %)	-	560	For each Test
6.2(Sulphur %)	-	560	For each Test
6.2( Nitrogen%)	-	560	For each Test

31 Jul, 2024

-
-

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

3500 View breakup
Rs.3500.00, For each additional wire = Rs.500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	560	For each Test
12.3, Table-1(Breaking load before stranding)	-	560	For each Test
12.3, Table-1(Breaking load after stranding)	-	560	For each Test
12.4(Wrapping test)	-	560	For each Test
12.5, Table 1(Resistance test)	-	560	For each Test
12.6, Table 3(Measurement of lay ratio)	-	560	For each Test
9.3(Stranding)	-	560	For each Test
6(Freedom from defects)	-	560	For each Test

31 Jul, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

Quality Marking & Testing Laboratory, Indore

03, Pologround, Industrial Estate, Indore (M.P.), Indore, Indore, Madhya Pradesh, 452015

9425601159 contactqmtl@yahoo.in

Scope List