BIS - LIMS (Laboratory Information Management System)

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

111 &112, B. T. ROAD, KOLKATA, 24 PARAGANAS NORTH, West Bengal, 700108

9433304462 dctc-er@dcmsme.gov.in

Scope List

Reset

44 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Nominal Dia 80-2000 MM

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	2500	Test Charge Rs. 1300/- for Hardness Test only as per Cl. 10.2 Test Charge Rs. 1200/- for Tensile Test only as per Cl. 10.1.5
Cl 11(Hydrostatic Test)	-	3800	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	6800	Test Charge Rs. 4400/- for Dimension as per Cl. 13 only + Test Charge Rs. 900/- for Ovality Cl. 15.3 & Rs. 900/- for Straightness Cl. 15.6; and Rs. 600 for Visual Cl. 7.2

31 Dec, 2026

-
-

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

Lamp Rating : Upto 25 W, 40 W, 60 W, 100 W & 200 W

69375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Lamp Dimensions, IS 418:2004)	-	1000	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
7.2(Lamp Dimensions, IS 418:2004)	-	1000	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.1(Wattage, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.2.1(Luminous Flux Initial, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.2.2(Luminous Flux Initial, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
9(Lumen Maintenance, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
10.1(Life Test Requirements, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
10.2(Life Test Requirements, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
6(Marking, IS 418)	-	500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-

31 Dec, 2026

-
-

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

All

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Material)	-	5000	-
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	Total charge for Cl. 7 Construction is Rs. 600/-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	1300	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	1300	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-

31 Dec, 2026

-
-

IS 1537 (1976)

Specification for vertically cast iron pressure pipes for water, gas and sewage (First Revision)

Size-Nominal Diameter 80- 1500

11300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 to 10.6(Coating )	-	2000	-
3.1 , 6 of IS 210( The composition of cast iron shall be left to the discretion of the manufacturer)	-	600	-
4.1(Tensile Strength)	-	2500	Cl 4.1 + 4.2
4.2(Hardness test)	-	2500	Cl 4.1 + 4.2
6.1(Hydrostatic test)	-	2500	-
7.1 & Table 2(DE)	-	3100	Total Total charge for Dimension as per Cl 7 Rs. 3100/-
7.1 & Table 2(DI)	-	3100	-
7.1 & Table 2(P)	-	3100	-
7.1 & Table 2(g)	-	3100	-
7.1 & Table 2(h)	-	3100	-
7.1 & Table 2(DC)	-	3100	-
7.1 & Table 2(c)	-	3100	-
7.1 & Table 2(f)	-	3100	-
7.1 & Table 3(DI)	-	3100	-
7.1 & Table 3(P)	-	3100	-
7.1 & Table 3(g)	-	3100	-
7.1 & Table 3(h)	-	3100	-
7.1 & Table 4(D)	-	3100	-
7.1 & Table 4(a)	-	3100	-
7.1 & Table 4(b)	-	3100	-
7.1 & Table 4(s)	-	3100	-
7.1 & Table 4(r)	-	3100	-
7.1 & Table 5(D)	-	3100	-
7.1 & Table 5(C)	-	3100	-
7.1 & Table 5(Holes Number)	-	3100	-
7.1 & Table 5(Holes Diameter)	-	3100	-
7.1 & Table 5(Diameter of Bolts)	-	3100	-
7.1 & Table 6 to 8(DE)	-	3100	-
7.1 & Table 6 to 8(t)	-	3100	-
7.1 & Table 6 to 8(Mass of one meter barrel (Approx))	-	3100	-
7.1 & Table 6 to 8(Socket mass (Approx))	-	3100	-
7.1 & Table 6 to 8(Total mass for one working length in meter)	-	3100	-
8.4(Permissible deviation from a straight line)	-	3100	-
9.1,Table 9(DE)	-	3100	-
9.1,Table 9(e)	-	3100	-
9.1,Table 9(Flange, Mass of one meter (Approx))	-	3100	-
9.1,Table 9(Mass of one flange (Approx))	-	3100	-
9.1,Table 9(Working Length)	-	3100	-

31 Dec, 2026

-
Cl 6.1 Housing test (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

All size as per IS

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1.1(Visual Inspection Test)	-	2500	-
6.1.1.2(Macro Examination)	-	1400	-
6.1.1.3(Micro Examination)	-	1000	-
5(Material-Rolled Steel Section)	-	1900	Total Charge for Dimension Test Rs. 1900/-
5(Material-Coupling Section)	-	1900	Total Charge for Dimension Test Rs. 1900/-
5(Material-Glass Panels)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.1(Frames)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.1.1.4(Fillet Weld Test)	-	1000	-
6.2(Side Hung Shutter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter- Thickness of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter- Pin diameter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter-Width of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Material of handel )	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Material of handel plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Height of handle plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Material)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Thickness)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-A)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-B)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-C)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-D)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-E)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-F)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-G)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-H)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-J)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-K)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-L)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-M)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Thickness of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Pin diameter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Width of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.1(Position of Holes)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Position of Fixing Screws)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-A)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-B)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-C)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-D)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-E)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-F)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-G)	-	1900	Total Charge for Dimension Test Rs. 1900/-

31 Dec, 2026

-
-

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

All

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1(PHOSPHORUS)	-	5000	-
3.1.1(SULPHUR)	-	5000	-
Clause 3.4(Surface Finish)	-	1000	-
Cl 5.1(Diameter)	-	1300	-
Cl 6.1(Tensile Test On UTM)	-	1200	-
Cl 6.2(Tensile Test On UTM)	-	1200	-
Cl. 7.4(0.2 % Proof Stress )	-	1563	-
Cl. 7.5(Ductility/ Reverse Bend Test)	-	1600	-

31 Dec, 2026

-
-

IS 6701 (1985)

Specification for tungsten filament miscellaneous electric lamps (First Revision)

Upto 15W

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3 of IS 6701:1985(REQUIREMENTS FOR MECHANICAL AND PHYSICAL CHARACTERISTICS)	-	6500	-
Cl 5 of IS 6701:1985(MARKING)	-	500	-
6.2.1(Wattage)	-	2500	-
6.2.1(Lumens)	-	2500	-
6.2.2(Average Life)	-	3000	-

31 Dec, 2026

-
-

IS 4038 (1986)

Foot Valves For Water Works Purposes

Size- 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Coating)	-	5000	-
4.1(MANUFACTURE-Type)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.2(MANUFACTURE)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.3(MANUFACTURE- Housings)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4(MANUFACTURE- Flanges)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-D)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Rhickness of flange)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-C)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-A)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-d)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Dia of bolt)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5(MANUFACTURE- Screwed Ends-screwed-ends Polygon side)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5(MANUFACTURE- Screwed Ends-screwed)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-L)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.1-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-H)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-D)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6(MANUFACTURE- Strainers )	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6(MANUFACTURE- Strainers -Thickness)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Nominal Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Maximum dia of Hole(Ciecular))	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -MAXIMUM VALUE FOR THE Small dimension of the hole(Non-circular))	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.7(MANUFACTURE-Bolts and Nuts-)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
6.1.1(Seat Test)	-	2500	Total charge for Hydraulic Test is Rs, 2500/-
6.1.2(Housing Test)	-	2500	Total charge for Hydraulic Test is Rs, 2500/-

31 Dec, 2026

-
Cl 6.1.2 Housing test (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

All

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Manufacture)	-	600	-
3.3(Manufacture)	-	600	-
3.4(Manufacture)	-	600	-
6.1(Hydrostatic Test)	-	1900	-
7.1(Sizes and Mass)	-	2300	-
7.2(Sizes and Mass)	-	2300	-
7.3(Sizes and Mass)	-	2900	Cl. 7.0, 7.1, 7.2, 7.3, 8 Dimensional Verification 2300.00 Cl. 7.3, 8 Weight Measurement 600.00
7.4(Sizes and Mass Dimensions of Flange)	-	0	-
5.1(Tensile Test)	-	0	-

31 Dec, 2026

-
Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

All

13900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	5000	--
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	5000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	5000	-
Cl 6(Workmanship)	-	600	-
15(Corrosion Resistance - IS:10461)	-	0	-
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	1300	-
Cl 10(UTM)	-	2700	Tensile Strength & Elongation Percent 1200.00 Yield Strength 875.00 Reduction Percent 625.00
10.2(Reverse bend test-IS 1716)	-	1600	-
10.3(Torsion test- IS 1717)	-	1200	-
10.4(Wrapping test-IS 1755)	-	900	-

31 Dec, 2026

-
-

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Upto 300 Sq. mm Cable Size

11700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions)	-	1000	Rs. 4750 /- for Electrical test charge only
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1200	-
8.2(Mechanical Properties (as per IS 1717))	-	1200	-
8.3(Mechanical Properties (as per IS 1755))	-	1200	-
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	3750	Electrical Resistance Test
9.1(Galvanizing Requirements )	-	1000	-
Clause 6.1, Table-1(Sulphur)	-	5000	-
Clause 6.1, Table-1(Phosphorus)	-	5000	-
6.2(Phosphorus %)	-	5000	-
6.2(Sulphur %)	-	5000	-
6.2( Nitrogen%)	-	5000	-
9.2(Galvanizing Requirements )	-	1000	-
11(Freedom from defects)	-	600	--
7(Dimensions)	-	1300	For Mechanical part
14(Marking)	-	600	-

31 Dec, 2026

-
-

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

All

20600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	500	Classification Charge Rs. 500
7.2(Type of installation)	-	500	Classification Charge Rs. 500
7.3(Types of inlets)	-	500	Classification Charge Rs. 500
7.4(Clamping means)	-	500	Classification Charge Rs. 500
7.5(Minimum temperature during installation)	-	500	Classification Charge Rs. 500
7.6, 7.7, 7.8(The degree of ingress protection)	-	500	Classification Charge Rs. 500
7.9(The provision for fixing accessories to the boxes )	-	500	Classification Charge Rs. 500
7.1(The method of fixing the terminals)	-	500	Classification Charge Rs. 500
8.1(marking)	-	500	Marking Charges 500
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	500	Marking Charges 500
8.3(BIS Certification Marking)	-	500	Marking Charges 500
9.0(Dimensions)	-	1000	-
10.0(Protection against electric shock)	-	500	-
11.0(PROVISION FOR EARTHING)	-	500	-
12.0(Constructions)	-	2000	-
13.0(Resistance to ingress of solid objects)	-	8600	Ingress Protection Test Rs. 8600.00
13.0(Resistance toharmful ingress of water)	-	8600	Ingress Protection Test Rs. 8600.00
13.0(Resistance to ageing)	-	8600	Ingress Protection Test Rs. 8600.00
14.0(insultation resistance)	-	2000	Insulation resistance & Electric Strength Rs. 2000.00
14.0(electric strength)	-	2000	Insulation resistance & Electric Strength Rs. 2000.00
15.0(Mechanical strength)	-	500	-
16.0(resistance to heat)	-	500	-
17.0(creepage distance)	-	500	creepage distance & clearances Rs. 500.00
17.0(clearances)	-	500	creepage distance & clearances Rs. 500.00
17.0(distance through seating compund)	-	500	creepage distance & clearances Rs. 500.00
18.0(Resistance to insulating material to abnormal heat and fire)	-	1500	-
19.0(Resistance to tracking)	-	1500	-
20.0(Resistance to corrosion)	-	500	-

31 Dec, 2026

-
Included w.e.f 13.01.2025

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

All

13375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1200	-
Cl 8(Press)	-	1200	-
Cl 9(Strainage Embrittlement)	-	900	-
Cl 10(Erichsen Cupping)	-	1300	-
Cl 13(Length, Width & Thickness)	-	1300	-
Cl 7(UTM)	-	1200	-
Cl 8(Press)	-	1200	-
Cl 9(Strainage Embrittlement)	-	900	-
Cl 10(Erichsen Cupping)	-	1300	-
Cl 13(Length, Width & Thickness)	-	1300	-
Cl 7(UTM)	-	1200	-
Cl 8(Press)	-	1200	-
Cl 9(Strainage Embrittlement)	-	900	-
Cl 10(Erichsen Cupping)	-	1300	-
Cl 13(Length, Width & Thickness)	-	1300	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1(Nitrogen%)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1(Nitrogen%)	-	5000	-
6.1( Aluminium %)	-	5000	-
6.1(Carbon %)	-	5000	-
6.1(Manganese %)	-	5000	-
6.1(Phosphorus %)	-	5000	-
6.1(Sulphur %)	-	5000	-
6.1(Silicon %)	-	5000	-
6.1(Nitrogen%)	-	5000	-
6.1( Aluminium %)	-	5000	-
Cl. 13(Out of square)	-	1300	-
Cl. 13(Flatness)	-	1300	-
Cl. 13(Camber)	-	1300	-
Cl. 13(Width)	-	1300	-
Cl. 13(Thickness)	-	1300	-
Cl. 12(Freedom from defects)	-	1000	-
Cl. 7.2 Table 3(Elongation)	-	1200	-
Cl. 7.2 Table 3(Yield Stress)	-	875	-
Cl 13(Length, Width & Thickness)	-	1300	-
Cl 10(Erichsen Cupping)	-	1300	-
Cl 9(Strainage Embrittlement)	-	900	-
Cl 8(Press)	-	1200	-
Cl 7(UTM)	-	1200	-
Cl 7(UTM)	-	1200	-
Cl 8(Press)	-	1200	-
Cl 9(Strainage Embrittlement)	-	900	-
Cl 10(Erichsen Cupping)	-	1300	-
Cl 13(Length, Width & Thickness)	-	1300	-
6(Niobium as Nb)	-	5000	-
6(Titanium as Ti)	-	5000	-
6(Vanadium as V)	-	5000	-
6(Micro alloying elements)	-	5000	-
7(Tensile Strength-IS:1608(P1))	-	1200	-
7(Yield Strength-IS:1608(P1))	-	875	-
7(Elongation -IS:1608(P1))	-	1200	-
12(Freedom from defects)	-	1000	-
13(Length - SOP MT-23)	-	1300	-
13(Width-SOP MT-23)	-	1300	-
13(Thickness - SOP MT-23)	-	1300	-
13(Mass)	-	1300	-
15(Marking)	-	600	-

31 Dec, 2026

-
Included w.e.f. 31.12.2024

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

All

13100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	5000	-
6 AND AS PER IS 7887(ALUMINIUM)	-	5000	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	5000	-
6 AND AS PER IS 7887(SULPHUR)	-	5000	-
6 AND AS PER IS 7887(MANGANESE)	-	5000	-
6 AND AS PER IS 7887(SILICON)	-	5000	-
6 AND AS PER IS 7887(CARBON)	-	5000	-
7 & 8(Ovality)	-	1300	-
7 & 8(Diameter)	-	1300	-
9.2(Wrapping Test)	-	900	-
9.3(Bend test)	-	1200	-
10(Finish)	-	600	-
11(Coating test)	-	1000	-
13(Freedom from defects)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 11(Workmanship)	-	1000	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 6 and Note 3 of IS 7887(Copper)	-	5000	-
14(Packing)	-	600	-
15(Marking)	-	600	-
Clause 6 and Note 3 of IS 7887(Copper)	-	5000	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
9.3(Bend test)	-	1200	-
10(Finish)	-	600	-
11(Coating test)	-	1000	-
13(Freedom from defects)	-	600	-
Cl 13(Workmanship)	-	600	-
Cl 11(Workmanship)	-	1000	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	1000	-
Clause 6 and Note 3 of IS 7887(Copper)	-	1000	-
14(Packing)	-	600	-
15(Marking)	-	600	-
Clause 6 and Note 3 of IS 7887(Copper)	-	1000	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
9.3(Bend test)	-	1200	-
10(Finish)	-	600	-
11(Coating test)	-	1000	-
13(Freedom from defects)	-	600	-
Cl 13(Workmanship)	-	600	-
Cl 11(Workmanship)	-	1000	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	1300	-
Cl 9(Tensile Test On UTM)	-	1300	-
Cl 11(Workmanship)	-	1000	-
Cl 13(Workmanship)	-	600	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 6 and Note 3 of IS 7887(Copper)	-	5000	-
14(Packing)	-	600	-
15(Marking)	-	600	-
Clause 6 and Note 3 of IS 7887(Copper)	-	5000	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 9(Tensile Test On UTM)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 9(Tensile Test On UTM)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 9(Tensile Test On UTM)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 13(Workmanship)	-	-	-
9.3(Bend test)	-	-	-
10(Finish)	-	-	-
11(Coating test)	-	-	-
13(Freedom from defects)	-	-	-
Cl 13(Workmanship)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 9(Tensile Test On UTM)	-	-	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 9(Tensile Test On UTM)	-	-	-
Cl 11(Workmanship)	-	-	-
Cl 13(Workmanship)	-	-	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	-	-
Clause 6 and Note 3 of IS 7887(Copper)	-	-	-
14(Packing)	-	-	-
15(Marking)	-	-	-
Clause 6 and Note 3 of IS 7887(Copper)	-	-	-

31 Dec, 2026

-
Included w.e.f. 31.12.2024

Bureau of Indian Standards

The National Standards Body of India

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

111 &112, B. T. ROAD, KOLKATA, 24 PARAGANAS NORTH, West Bengal, 700108

9433304462 dctc-er@dcmsme.gov.in

Scope List