BIS - LIMS (Laboratory Information Management System)

OMRESEARCH & TESTING LABORATORY PRIVATE LIMITED

GIRWAR BHAWAN, SUKHDEO NAGAR, RATU ROAD, RANCHI, RANCHI, Ranchi, Jharkhand, 834005

6206339360 omlaboratories2019@gmail.com

Scope List

Reset

36 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE 63, PE 80 and PE 100

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2500	-
8.9 table-6(Elongation at Break)	-	1500	-
8.8(Tensile Strength for Butt-fusion)	-	1500	-
8.7(Density)	-	1500	-
8.4( Melt Flow Rate)	-	2000	-
8.2(Longitudinal Reversion Test)	-	2000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	10000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	10000	-
7.4.1.2(Ovality)	-	1000	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1000	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1(PIPE DESCRIPTION)	-	0	-
8.6(Overall migration)	-	2000	-
8.3(Carbon black)	-	2000	-
5.4(Anti oxydent)	-	2000	-
5.3(e)(Carbon Black Master Batch)	-	2000	-
5.3(d)(Carbon Black Master Batch)	-	2000	-
5.3(c)(Carbon Black Master Batch)	-	2000	-
5.3(b)(Carbon Black Master Batch)	-	2000	-
5.3 (a)(Carbon Black Master Batch)	-	2000	-
5.2(Polyethylene Resin)	-	2000	-
5, 5.1 table-1(MATERIALS)	-	0	-
5.2(Density)	-	2000	-
5.2(Volatile matter Content)	-	2000	-
Clause 7.1(Visual Apperance)	-	1000	-
Clause 7.3(Coiling)	-	1000	-
Clause 8.3(Carbon Black content)	-	1000	-
Clause 8.3(Carbon Black Dispersion)	-	1000	-
CL 7.4(Wall Thickness (Take 8 reading & Minimum and Maximum reported))	-	1000	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	3000	-

18 Mar, 2029

-
-

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE 63, PE 80, PE 100

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1000	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1000	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	-
5.3(Density of Higher olefin - IS 7328:2020)	-	1000	-
5.3(Olefin Constituents- 14333-2022)	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
6(Pipe Description - IS 14333-2022)	-	500	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	500	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	2000	-
8.3(Carbon black content- IS 2530-1963)	-	1000	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2000	-
8.6(Density-IS 7328:2020)	-	2000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	3000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	3000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	3000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	10000	-
5.4(Antioxidant - Any Method)	-	1000	-
7.3(Coiling- IS 14333-2022)	-	1000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	3000	-

18 Mar, 2029

-
-

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

class 1 -6 & Group 1-3

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	2000	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	2000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	2000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	2000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	10000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	10000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	10000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	10000	-
11.2(Resistance to External Blows at 0°C)	-	2000	-
10.3(Effect on Water Test)	-	5000	-
6.1.2(PVC Resin)	-	2000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	500	-
6.1.1(VCM Content)	-	5000	-
7.2.1.2b(Maximum inner diameter of groove)	-	250	-
13.1(Marking)	-	500	-
5(CLASSIFICATION OF PIPES)	-	500	-

18 Mar, 2029

-
-

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	1000	-
4.3(Nominal Diameter)	-	1000	-
4.4(Colour)	-	1000	-
5.1(Polyethylene compound)	-	1000	-
5.7(PE Compound Quality Evaluation)	-	1000	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	1000	-
5.6(Resistance to Weathering)	-	1000	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	1000	-
6.1(Out of Roundness (Ovality))	-	1000	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	1000	-
7(Finish)	-	1000	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	10000	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	10000	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	10000	-
8.2(Reversion Test)	-	2000	-
8.3(Density)	-	2000	-
8.7(Volatile Matter Content)	-	2000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	3000	-
6.4(Length of Pipe)	-	1000	-
8.4(Melt Flow Rate (MFR))	-	2000	-
8.5(Pigment Dispersion)	-	2000	-
8.10(Slow Crack Growth Rate Test)	-	2000	-
8.11(Squeeze-off)	-	1000	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	1000	-
5.1, 5.7 Table 2(v) Water content1))	-	2000	-
6(Dimensions of pipes)	-	1000	-
10(Marking)	-	1000	-
5.6(ii) Hydraulic characteristics)	-	10000	-
5.3(Anti-oxidant)	-	1000	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	1000	-
8.6(Thermal Stability (Oxidation Induction Time))	-	3000	-

18 Mar, 2029

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

RMS,RDS,PMS,PDS,CS,CM,CD

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	2000	-
9.5(Tensile Strength IS 12235(Part 13))	-	2000	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	2000	-
9.3(Density IS 12235 (Part 14))	-	1000	-
9.2(Internal Diameter)	-	250	-
9.1( Visual Appearance)	-	250	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	-
8.4(Sealing rings - Hardness)	-	500	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	500	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500	-
7.3.2(Rib height)	-	250	-
7.3.1(No.of Ribs)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	250	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	2500	-
5(COLOUR)	-	500	-
8(Marking)	-	500	-

18 Mar, 2029

-
-

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

79000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	5000	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	2000	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	2000	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	2000	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	10000	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	10000	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	4000	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500	-
6.3.2(Length of Pipe)	-	500	-
8.1.1 Table-10 (iv)(Creep ratio)	-	5000	-
6.3.3(Out Side Diameter)	-	500	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	3000	-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	3000	-
9 Table 12 (ii)(Water tightness)	-	3000	-
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	3000	-
7.1(Appearance)	-	500	-
7.1.1(Color of Finished Pipes)	-	500	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	3000	-
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	3000	-
6.3.5.2(Wall Thickness(e4 min))	-	500	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	3000	-

18 Mar, 2029

-
-

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2500	-
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	2500	-
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	2500	-
3.2.3(Socket, Measurement)	-	2500	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2500	-
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	2500	-
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	2500	-
3.2.3(Socket, measurements)	-	2500	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
3.2, 3.2.1, Fig 2(Manufacture)	-	2000	-
3.2.2, Fig 1, table 1(Dimensions)	-	2000	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	2000	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 45o Bend)	-	2000	-
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-	2000	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	3500	-
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	3500	-
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	3500	-
3.1(General)	-	0	-
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	200	-
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	200	Opacity-S.No-359-Eqp no-OML/155 Short term hydrostatic- S.No-178-Eqp no-OML/074, OML/075, OML/312, OML/073, OML/275 Effect on water- (S.no-Lead-31,Cadmium-53,Mercury-47-Eqp no-OML/105 These clause is not in this part all in 10124 part 1 mention
3.1(General)	-	0	-
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	0	-
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	200	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
3.2(Materials)	-	2000	-
3.3, 3.3.1, Fig 1(Manufacture)	-	2000	-
3.3.2, table 1, fig 1(Dimensions)	-	2000	-
3.3.3(socket measurement shall comply with IS 10124 (Part 1).)	-	2000	-
Table 1 (Clauses 3.3.1 and 3.3.2)(Dimensions of Threaded Adaptors)	-	2000	-
3.1(General)	-	0	-
3.2(Materials)	-	0	-
3.3, 3.3.1, Fig 1(Manufacture)	-	0	-
3.3.2, table 1, fig 1(Dimensions)	-	200	-
3.3.3(socket measurement shall comply with IS 10124 (Part 1).)	-	200	-
Table 1 (Clauses 3.3.1 and 3.3.2)(Dimensions of Threaded Adaptors)	-	200	Opacity-S.No-359-Eqp no-OML/155 Short term hydrostatic- S.No-178-Eqp no-OML/074, OML/075, OML/312, OML/073, OML/275 Effect on water- (S.no-Lead-31,Cadmium-53,Mercury-47-Eqp no-OML/105 These clause is not in this part all in 10124 part 1 mention
3.1(General)	-	0	-
3.2(Materials)	-	0	-
3.3, 3.3.1, Fig 1(Manufacture)	-	0	-
3.3.2, table 1, fig 1(Dimensions)	-	0	-
3.3.3(socket measurement shall comply with IS 10124 (Part 1).)	-	0	-
Table 1 (Clauses 3.3.1 and 3.3.2)(Dimensions of Threaded Adaptors)	-	0	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
3.2, 3.2.1, Fig 2(Manufacture)	-	2000	-
3.2.2, Fig 2, table 2(Dimensions)	-	2000	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	2000	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 90o Bends)	-	2000	-
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-	2000	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
3.2, 3.2.1, Fig 2(Manufacture)	-	2000	-
3.2.2, Fig 1, table 1(Dimensions)	-	2000	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	2000	-
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1)(Dimensions of 60o Bends)	-	2000	-
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-	2000	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
3.2, 3.2.1, Fig 1(Manufacture)	-	2000	-
3.2.2, Fig 2, table 2(Dimensions)	-	2000	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-	2000	-
Table 2 (Cl.3.2.2, and Fig.1)(Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-	2000	-
3.1(General)	-	0.02	-
3.2, 3.2.1, Fig 1(Manufacture)	-	0.01	-
3.2.2, Fig 2, table 2(Dimensions)	-	200.01	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-	200.01	-
Table 2 (Cl.3.2.2, and Fig.1)(Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-	200.01	Opacity-S.No-359-Eqp no-OML/155 Short term hydrostatic- S.No-178-Eqp no-OML/074, OML/075, OML/312, OML/073, OML/275 Effect on water- (S.no-Lead-31,Cadmium-53,Mercury-47-Eqp no-OML/105 These clause is not in this part all in 10124 part 1 mention
3.1(General)	-	0	-
3.2, 3.2.1, Fig 1(Manufacture)	-	0	-
3.2.2, Fig 2, table 2(Dimensions)	-	0	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-	0	-
Table 2 (Cl.3.2.2, and Fig.1)(Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-	0	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2500	-
3.2, 3.2.1, Fig 1(Manufacture)	-	2500	-
3.2.2, Fig 1(Dimensions)	-	2500	-
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Equal Tees)	-	2500	-
3.1(General)	-	0.01	-
3.2, 3.2.1, Fig 1(Manufacture)	-	0	-
3.2.2, Fig 1(Dimensions)	-	200	-
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Equal Tees)	-	200	Opacity-S.No-359-Eqp no-OML/155 Short term hydrostatic- S.No-178-Eqp no-OML/074, OML/075, OML/312, OML/073, OML/275 Effect on water- (S.no-Lead-31,Cadmium-53,Mercury-47-Eqp no-OML/105
3.1(General)	-	0	-
3.2, 3.2.1, Fig 1(Manufacture)	-	0	-
3.2.2, Fig 1(Dimensions)	-	200	-
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Equal Tees)	-	200	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
3.1(General)	-	2000	-
3.2, 3.2.1, Fig 1(Manufacture)	-	2000	-
3.2.2, Fig 1(Dimensions)	-	2000	-
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps)	-	2000	-
3.1(General)	-	200.01	-
3.1(General)	-	200.01	-
3.2, 3.2.1, Fig 1(Manufacture)	-	0	-
3.2.2, Fig 1(Dimensions)	-	200	-
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps)	-	200	Opacity-(S.no-359)-OML/155 Short term hydrostatic-(S.no-178)-OML/074,OML/075,OML/312,OML/275,OML/073 Effect on water-S.no-31,53,47 - Eqp no-OML/105
3.1(General)	-	0	-
3.1(General)	-	0	-
3.2, 3.2.1, Fig 1(Manufacture)	-	1000	-
3.2.2, Fig 1(Dimensions)	-	200	-
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps)	-	200	-

18 Mar, 2029

-
included w.e.f 04.08.2026

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

Irrigation Equipment — Emitters

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	500	-
Cl-5.2(Emitter Ends)	-	500	-
Cl-5.3(Materials)	-	500	-
Cl-6.1(Test Specimens)	-	500	-
Cl-6.2.1(polyethylene pipe)	-	500	-
Cl-6.2.2("grease or chemicals ")	-	500	-
Cl-6.2.3(water temperature)	-	500	-
Cl-6.3(Accuracy or Measuring Devices)	-	500	-
Cl-7.1(Construction and Workmanship)	-	500	-
Cl-7.2(Flow Paths in Emitter)	-	500	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	500	-
Cl-7.4(Emitter Pull-Out)	-	500	-
Cl-7.4.1(In-Line Emitters)	-	500	-
Cl-7.4.2(On-Line Emitters)	-	500	-
Cl-8.1.1(Uniformity of Emission Rate)	-	500	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	500	-
Cl-8.1.3(Determination of Emitter Exponent)	-	500	-
Cl-9(Marking)	-	500	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	1000	-
3.2, 3.2.1, Fig 1(Manufacture)	-	1000	-
3.2.2, Fig 1(Dimensions)	-	2000	-
Table-1 (cl.3.2.2, Fig 1)(Dimensions of Straight Reducers)	-	2000	-
3.1(General)	-	1000	-
3.2, 3.2.1, Fig 1(Manufacture)	-	999.99	-
3.2.2, Fig 1(Dimensions)	-	999.99	-
Table-1 (cl.3.2.2, Fig 1)(Dimensions of Straight Reducers)	-	1000	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	4000	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	4000	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	4000	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	4000	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	4000	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	4000	-
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1000	-
3.2.1, Table-1, Fig-1(Nominal size)	-	500	-
3.2.1, Table-1, Fig-1(B)	-	500	-
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	500	-
3.2.1, Table-1, Fig-1(Plumbing)	-	500	-
Clause 3.2.2, and Fig. 2(Nominal size)	-	500	-
Clause 3.2.2, and Fig. 2.(B)	-	500	-
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	500	-
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	500	-
3.1(General)	-	500	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	2999.99	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	999.99	-
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	999.99	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	999.99	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	999.99	-
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	999.99	-
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	999.99	-
3.2.1, Table-1, Fig-1(Nominal size)	-	199.99	-
3.2.1, Table-1, Fig-1(B)	-	0	-
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	-
3.2.1, Table-1, Fig-1(Plumbing)	-	0	-
Clause 3.2.2, and Fig. 2(Nominal size)	-	0	-
Clause 3.2.2, and Fig. 2.(B)	-	0	-
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	-
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	-
3.1(General)	-	0	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIES

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1000	-
2.2(Manufacture)	-	1000	-
2.2.2(diameter of the socket of cap)	-	1000	-
2.1(General)	-	1000	-
2.2(Manufacture)	-	1000	-
2.2.2(diameter of the socket of cap)	-	1000	-
6.1.1(VCM Content Test)	-	1000	-
2.2.2 table 1(Laying length)	-	1000	-
6.1.1(VCM Content Test)	-	2999.99	-
2.2.2 table 1(Laying length)	-	300	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

INJECTION ,MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR ‘WATER SUPPLIES

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2 table 1(Laying length)	-	1000	-
6.1.1(VCM Content Test)	-	1000	-
2.2.3(Socket length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.2, Table 1(Union Laying Length)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2(Manufacture)	-	500	-
2.1(General)	-	500	-
2.2.3(Socket length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.2, Table 1(Union Laying Length)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2(Manufacture)	-	500	-
2.1(General)	-	500	-
table 1 sl.no: 07(63 )	-	500	-
table 1 sl.no: 06(50 )	-	500	-
table 1 sl.no: 05(40 )	-	500	-
table 1 sl.no: 04(32 )	-	500	-
table 1 sl.no: 03(25 )	-	500	-
table 1 sl.no: 02(20 )	-	500	-
table 1 sl.no: 01(16 )	-	500	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIES

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2 table 1(Laying length)	-	1000	-
6.1.1(VCM Content Test)	-	1000	-
2.2.3(Socket length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
table 1 sl.no: 01(16 )	-	500	-
table 1 sl.no: 02(20 )	-	500	-
table 1 sl.no: 03(25 )	-	500	-
table 1 sl.no: 04(32 )	-	500	-
table 1 sl.no: 05(40 )	-	500	-
table 1 sl.no: 06(50 )	-	500	-
table 1 sl.no: 07(63 )	-	500	-
table 1 sl.no: 08(75 )	-	500	-
table 1 sl.no: 09(90 )	-	500	-
table 1 sl.no: 10(110 )	-	500	-
table 1 sl.no: 11(125 )	-	500	-
table 1 sl.no: 12(140 )	-	500	-
table 1 sl.no: 13(160 )	-	500	-
table 1 sl.no: 14( 180 )	-	500	-
table 1 sl.no: 15(200 )	-	500	-
table 1 sl.no: 16(225 )	-	500	-
table 1 sl.no: 17(250.0)	-	500	-
table 1 sl.no: 18(280.0)	-	500	-
table 1 sl.no: 19(315.0)	-	500	-
2.2.2, Table 1(Socket Laying Length)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2(Manufacture)	-	500	-
2.1(General)	-	500	-
2.1(General)	-	500	-
2.2(Manufacture)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2.2, Table 1(Socket Laying Length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	500	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIES

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2 table 1(Laying length)	-	1000	-
6.1.1(VCM Content Test)	-	1000	-
2.2.3(Socket length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2(Manufacture)	-	500	-
2.1(General)	-	500	-
2.2.3(Socket length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2(Manufacture)	-	500	-
2.1(General)	-	500	-
table 1 sl.no: 01(16 (Z) )	-	500	-
table 1 sl.no: 02(20 (Z) )	-	500	-
table 1 sl.no: 03(25 (Z) )	-	500	-
table 1 sl.no: 04(32 (Z) )	-	500	-
table 1 sl.no: 05(40 (Z) )	-	500	-
table 1 sl.no: 06(50 (Z) )	-	500	-
table 1 sl.no: 07(63 (Z) )	-	500	-
table 1 sl.no: 08(75 (Z) )	-	500	-
table 1 sl.no: 09(90 (Z) )	-	500	-
table 1 sl.no: 10(110 (Z) )	-	500	-
table 1 sl.no: 11(125 (Z) )	-	500	-
table 1 sl.no: 12(140 (Z) )	-	500	-
table 1 sl.no: 13(160(z))	-	500	-
table 1 sl.no: 01(16 (Z1) )	-	500	-
table 1 sl.no: 03(25 (Z1) )	-	500	-
table 1 sl.no: 04(32 (Z1) )	-	500	-
table 1 sl.no: 05(40 (Z1) )	-	500	-
table 1 sl.no: 06(50 (Z1) )	-	500	-
table 1 sl.no: 07(63 (Z1) )	-	500	-
table 1 sl.no: 08(75 (Z1) )	-	500	-
table 1 sl.no: 09(90 (Z) )	-	500	-
table 1 sl.no: 10(110 (Z1) )	-	500	-
table 1 sl.no: 11(125 (Z1) )	-	500	-
table 1 sl.no: 12(140 (Z1) )	-	500	-
table 1 sl.no: 13(160(z1))	-	500	-
table 1 sl.no: 02(20 (Z1) )	-	500	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 10889 (2004)

High density polyethylene films (First Revision)

High density polyethylene films

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.4(Density)	-	300	-
6.4.3, Table 6(Average Thickness of Film)	-	200	-
6.1.5(Melt Flow Rate)	-	500	-
6.2.1, Table 1(Nominal Thickness)	-	200	-
6.2.1, Table 1(Tolerance, Percent Grade 1 and 2)	-	300	-
6.2.2, Table 2(Nominal Width)	-	200	-
6.2.2, Table 2(Tolerance, Percent Grade 1 and 2)	-	200	-
6.1.6(Black Film)	-	500	-
5.2(Black Compound)	-	1000	-
6.1.1(Appearance)	-	0	-
6.1.2(Film Form)	-	0	-
4.0(Grades)	-	500	-
5.1(Materials)	-	500	-
6.1.3(Odour )	-	0	-
6.3, Table 3(Yield Tolerance)	-	2000	-
6.3, Table 3(Tolerance, Percent Grade 1 and 2)	-	300	-
6.4.1(Tensile Strength at Break)	-	2000	-
6.4.1, Table 4(Direction)	-	2000	-
6.4.1, Table 4(Grade 1 and 2)	-	500	-
6.4.2(Elongation at Break)	-	2000	-
6.4.2, Table 5(Direction)	-	2000	-
6.4.2, Table 5(Elongation at Break, Percent Grade 1 and 2)	-	2000	-
6.4.3(Impact Resistance (Falling Dart))	-	800	-
6.4.3, Table 6(Impact Failure Load)	-	800	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 9738 (2025)

POLYETHYLENE BAGS FOR GENERAL PURPOSES - SPECIFICATION (third revision)

Polyethylene Bags for General Purposes

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1, Table-2(Dimensions of Flat Bags- Size b × l)	-	500	-
Cl-7.1, Table-2(Dimensions of Flat Bags- Nominal Thickness of Film -LDPE/LLDPE/Blends)	-	500	-
Cl-7.1, Table-2(Dimensions of Flat Bags- Nominal Thickness of Film -HMHDPE)	-	500	-
Cl-7.1, Table-3(Dimensions of U-Shaped Bags (Gusseted)- Size b × l)	-	500	-
Cl-7.1, Table-3("Dimensions of U-Shaped Bags (Gusseted)- Nomination Thickness of Film- LDPE/LLDPE/Blends")	-	500	-
Cl-7.1, Table-3("Dimensions of U-Shaped Bags (Gusseted)- Nomination Thickness of Film- HMHDPE")	-	500	-
Cl-7.1, Table-3(Dimensions of U-Shaped Bags (Gusseted)- Nominal Finish Width b)	-	500	-
Cl-7.1, Table-4(Dimensions of Bottom Seal Flat Bags- Size b × l)	-	500	-
Cl-7.1, Table-4("Dimensions of Bottom Seal Flat Bags Nomination Thickness of Film- LDPE/LLDPE/Blends")	-	500	-
Cl-7.1, Table-4("Dimensions of Bottom Seal Flat Bags Nomination Thickness of Film- HMHDPE")	-	500	-
Cl-10(Packing and Marking)	-	500	-
Cl-6("Material Polyethylene films of low density polyethylene (LDPE), linear low density polyethylene (LLDPE), High density polyethylene (HDPE), High molecular high-density polyethylene (HMHDPE)")	-	1000	-
Cl-7.3(Thickness)	-	500	-
Cl-7.3(Tolerance)	-	500	-
Cl-8.1(Appearance)	-	500	-
Cl-8.2(Water Leak Test)	-	1000	-
Cl-8.3(Printing Ink Adhesion Test)	-	500	-
Cl-8.4(Drop Test)	-	1000	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 8360 (2022)

Fabricated Polyethylene Fittings for Water Supply ï¿½ Specification (First Revision)

FABRICATED POLYETHYLENE FITTINGS FOR WATER SUPPLY

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Hydraulic Characteristics)	-	2000	-
8.2(Tensile Strength for Butt-Fusion)	-	1500	-
9.1.2(Type Tests for Fittings Sizes)	-	500	-
9.2.2(Lot)	-	500	-
9.2.3(Visual and Dimensional Requirements for Fabricated PE Fittings)	-	500	-
4(Materials)	-	500	-
5(Sizes and Designation of Fittings)	-	500	-
6(Visual Appearance)	-	500	-
7(Dimensions of Fittings)	-	500	-
9.2.4.1(Fittings sizes up to 560 mm)	-	500	-
9.2.4.2(Fittings sizes including and above 630 mm)	-	500	-
10(Marking)	-	500	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

INJECTION MOULDED/MACHINED POLYETHYLENE FITTINGS FOR WATER SUPPLY

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Carbon Black Content and Dispersion)	-	600	-
4.1(Material)	-	1000	-
4.2(Material)	-	1000	-
4.1(Material)	-	1000	-
4.2(Material)	-	1000	-
4.3(Rework Material)	-	600	-
5(COLOUR)	-	200	-
6.1(The nominal outside diameter)	-	400	-
6.2(Bends, tees, pipe ends and end caps designation)	-	500	-
7(WELD LENGTH)	-	400	-
8(VISUAL APPEARANCE)	-	200	-
11.2(Acceptance Tests)	-	8000	-
11.1(Type Tests)	-	8000	-
10.6(Overall Migration)	-	2000	-
10.5(Oxidation Induction Time)	-	1000	-
10.4(Density)	-	500	-
10.3(Melt Flow Rate)	-	500	-
9.1(DIMENSIONS OF FITTINGS)	-	500	-
9.2(DIMENSIONS OF FITTINGS)	-	500	-
9.3(DIMENSIONS OF FITTINGS)	-	500	-
10.1.1(Length of Pipe for Welding Test)	-	500	-
10.1.2(Sandwich Flange Hydraulic Testing)	-	500	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Effect on water test)	-	3000	Including all effect on water test
3(Material)	-	1000	-
4(Size of fitting)	-	200	-
5.1 Table-1 Fig.1(Dimension of Socket length)	-	200	-
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	200	-
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	200	-
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	200	-
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	300	-
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	2000	-
8(Marking)	-	0	-
3.2.3(socket, measurements)	-	200	-
3.1(Material)	-	2000	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIES

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	3000	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	3000	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	3000	-
6.1.1(VCM Content Test)	-	1500	-
6.3(Effect on Water)	-	3000	-
Cl 6.3(Effect on Water Lead (first extraction))	-	3000	-
Cl 6.3(Effect on Water Lead (third extraction))	-	3000	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	3000	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000	-
Cl.4(Minimum Thickness)	-	200	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	200	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	200	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	200	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	500	-
Cl. 6.2(Opacity- Appendix B)	-	200	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	1500	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	200	-
5(Socket dimensions)	-	200	-
6.1(Stress Relief Test)	-	500	-
6.2(Opacity)	-	200	-
6.4(Short-Term Hydraulic Test)	-	2000	-
7.2(Production Routine Tests)	-	200	-
CL 4.0(Wall thickness (average of 4.0))	-	200	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	200	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) INJECTION MOULDED FITIINGS FORSOIL AND WASTE DISCHARGE SYSTEM FORINSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	0	-
3(Type of Fitting)	-	100	-
4(Size Designation)	-	0	-
5(Colour of fittings)	-	0	-
7.1,Table 1(Wall thickness)	-	200	-
7.2 ,Table 2&3(Socket Dimensions)	-	200	-
7.3(Dimensions of waste trap(Nahani Trap)	-	200	-
8(Sealing Rings)	-	200	-
10(Workmanship)	-	0	-
11(Design requirements)	-	0	-
11.1(Solvent cement type or Rubber ring type)	-	300	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	300	-
12(Physical test requirements)	-	200	-
12.1(Visual appearance)	-	0	-
12.2(Stress relief test)	-	500	-
12.3(Vicat softening tempewrature)	-	500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	800	-
Cl.15, Annex B(Sulphated Ash Content)	-	800	-
16(Mechanical Properties)	-	500	-
16.1(Impact test)	-	700	-
17(Watet tightness of joint)	-	1000	-
12.4(Effect on water test)	-	3000	-
7.4(Chamfer)	-	200	-
11.3(Access Openings)	-	200	-
Table 4(Dimension of Access Openings)	-	0	-
Cl 12.4(Effect on Water Lead (first extraction))	-	3000	-
Cl 12.4(Effect on Water Lead (third extraction))	-	3000	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	3000	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000	-

18 Mar, 2029

-
Included w.e.f. 22.06.2026

Bureau of Indian Standards

The National Standards Body of India

OMRESEARCH & TESTING LABORATORY PRIVATE LIMITED

GIRWAR BHAWAN, SUKHDEO NAGAR, RATU ROAD, RANCHI, RANCHI, Ranchi, Jharkhand, 834005

6206339360 omlaboratories2019@gmail.com

Scope List