BIS - LIMS (Laboratory Information Management System)

Delta Testing & Research Laboratories

Plot No. C-5, Block-C, Main Kanjhawala Road, Rajiv Nagar, New Delhi, North West, Delhi, 110086

9910596777 dtrlinfo@gmail.com

Scope List

Reset

96 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1 Annex B(Chloride Content of Resin)	-	2000	-
6.3.1 Annex B(Chloride content)	-	2000	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	25000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	-
7.1.3 (Effective length)	-	500	-
8(Pipe Ends)	-	500	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	5000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	5000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	5000	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	5000	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	5000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	5000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	5000	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	5000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	25000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1500	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2000	-
6.3(K value Test)	-	5000	-
7.1.2(Wall Thickness (Maximum))	-	500	-

31 Aug, 2023

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	500	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1000	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1000	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	500	-
4.3(Anti-oxidant)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
5.1.2(Ovality)	-	500	-
6.1(VISUAL APPEARANCE)	-	500	-
7.1 Table -2(Hydraulic Characteristics)	-	1000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	1000	-
7.4table-2(Fusion Compatibility Test)	-	1000	-
7.5(Density)	-	500	-
7.6(Melt now Rate (MFR))	-	1000	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	500	-
Cl.7.6(Melt Flow Rate)	-	1000	-
(Cl.7.5)(Density)	-	500	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1000	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	1000	-
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1000	-
Cl.7.2)(Reversion Test)	-	1000	-
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1000	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	1000	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	500	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	500	-
Cl.6(Visual Appearance)	-	500	-

31 Aug, 2023

-
-

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	4000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	4000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	4000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	4000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	4000	-
11.2(Resistance to External Blows at 0°C)	-	500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
10.3(Effect on Water Test)	-	500	-
6.1.2(PVC Resin)	-	9000	-

31 Aug, 2023

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2000	-
8.9 table-6(Elongation at Break)	-	1000	-
8.8(Tensile Strength for Butt-fusion)	-	1000	-
8.7(Density)	-	1000	-
8.5 (Oxidation Induction Time)	-	4000	-
8.4( Melt Flow Rate)	-	1000	-
8.2(Longitudinal Reversion Test)	-	1000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	2000	-
7.4.1.2(Ovality)	-	500	-
7.4 table -3 & 4(6.1 Dimensions)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.6(Overall migration)	-	500	-
8.3(Carbon black)	-	500	-
5.4(Anti oxydent)	-	500	-
5.3(e)(Carbon Black Master Batch)	-	500	-
5.3(d)(Carbon Black Master Batch)	-	500	-
5.3(c)(Carbon Black Master Batch)	-	500	-
5.3(b)(Carbon Black Master Batch)	-	500	-
5.3 (a)(Carbon Black Master Batch)	-	500	-
5.2(Polyethylene Resin)	-	500	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	500	-
5.3(Toluene Extract)	-	1000	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	1000	-
5.3(Toluene Extract)	-	1000	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	1000	-
5.3(Toluene Extract)	-	1000	-

31 Aug, 2023

-
-

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Impact Absorption Test)	-	30000	-
7.3(Rigidity Test)	-	5000	-
7.4(Projections and Surface Friction Test)	-	5000	-
7.5(Dynamic Test of Retention System)	-	5000	-
7.6(Audibility Test)	-	5000	-
7.7(Retention Test of Helmet)	-	5000	-
7.8(Micro-Slip Test of the Chin Strap)	-	5000	-
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	5000	-
7.10.1(Inadvertent Release by Pressure)	-	5000	-
7.10.3(Durability of Quick Release Mechanism)	-	5000	-
4.1(Shell)	-	2000	-
4.5(Metal Parts)	-	2000	-
4.6(Visor)	-	2000	-
6.1(General)	-	2000	-
6.3(Protactive Padding)	-	2000	-
6.4(Retention System)	-	2000	-
6.7(Peripheral Vision)	-	2000	-
6.8(Workmanship and Finish)	-	2000	-
7.10.2(Ease of Release)	-	2000	-
6.2(Shell)	-	2000	-

31 Aug, 2023

-
-

IS 9973 (1981)

Specification for visor for scooter helmets

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Impact resistance)	-	800	-
5.2(Penetration resistance)	-	800	-
5.3(Flammability)	-	3000	-
5.4.2(Spherical&Cylindral error)	-	4000	-
5.4.3(Prismatic Error)	-	1000	-
5.4.4(Diffuse transmittance)	-	500	-
5.4.5(Light transmission)	-	500	-
5.5(Field of Vision)	-	5000	-
7.0(Mass)	-	500	-
5.4.1(Distortion)	-	500	-

31 Aug, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

Delta Testing & Research Laboratories

Plot No. C-5, Block-C, Main Kanjhawala Road, Rajiv Nagar, New Delhi, North West, Delhi, 110086

9910596777 dtrlinfo@gmail.com

Scope List