BIS - LIMS (Laboratory Information Management System)

PRESTO LABORATORIES PRIVATE LIMITED

Plot No. 128,Phase 1,DLF Industrial Area, Faridabad, Faridabad, Haryana, 121003

9971459226 test@prestolaboratories.com

Scope List

Reset

11 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	5% discount on BIS Sealed Sample
6(Classification- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.4(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.6(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.7(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.8(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.11(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.12(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.13(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.14(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.15(Marking- IS 302-1)	-	100	5% discount on BIS Sealed Sample
7.101(Marking)	-	100	5% discount on BIS Sealed Sample
8( Protection Against Electric Shock, IS 302-1)	-	100	5% discount on BIS Sealed Sample
10(Power Input and Current, IS 302-1)	-	1200	5% discount on BIS Sealed Sample
11(Heating, IS 302-1)	-	5000	5% discount on BIS Sealed Sample
11(Heating, IS 302-1)	-	100	5% discount on BIS Sealed Sample
11(Heating, IS 302-1)	-	100	5% discount on BIS Sealed Sample
11(Heating, IS 302-1)	-	100	5% discount on BIS Sealed Sample
11(Heating, IS 302-1)	-	100	5% discount on BIS Sealed Sample
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	5% discount on BIS Sealed Sample
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	5% discount on BIS Sealed Sample
14(Transient Over Voltages, IS 302-1)	-	100	5% discount on BIS Sealed Sample
15.1(Moisture Resistance, IS 302-1)	-	5000	5% discount on BIS Sealed Sample
15.2(Moisture Resistance, IS 302-1)	-	100	5% discount on BIS Sealed Sample
15(Moisture Resistance, IS 302-1)	-	100	5% discount on BIS Sealed Sample
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	5% discount on BIS Sealed Sample
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	5% discount on BIS Sealed Sample
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	5% discount on BIS Sealed Sample
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	5% discount on BIS Sealed Sample
19.7(Abnormal Operation, IS 302-1)	-	5000	5% discount on BIS Sealed Sample
19.8(Abnormal Operation, IS 302-1)	-	100	5% discount on BIS Sealed Sample
19.9(Abnormal Operation, IS 302-1)	-	100	5% discount on BIS Sealed Sample
19.1(Abnormal Operation, IS 302-1)	-	100	5% discount on BIS Sealed Sample
19.101(Abnormal Operation)	-	100	5% discount on BIS Sealed Sample
19.102(Abnormal Operation)	-	100	5% discount on BIS Sealed Sample
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	5% discount on BIS Sealed Sample
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	5% discount on BIS Sealed Sample
20.101(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.102(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.103(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.104(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.105(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.106(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.107(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.108(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.109(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.110(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.111(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.112(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.113(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.114(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.115(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
20.116(Stability & Mechanical Hazards)	-	100	5% discount on BIS Sealed Sample
21.1(Mechanical Strength, IS 302-1)	-	100	5% discount on BIS Sealed Sample
21.2(Mechanical Strength, IS 302-1)	-	100	5% discount on BIS Sealed Sample
22(Construction, IS 302-1)	-	100	5% discount on BIS Sealed Sample
22.101(Construction)	-	100	5% discount on BIS Sealed Sample
22.102(Construction)	-	100	5% discount on BIS Sealed Sample
23.1(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.2(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.3(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.4(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.5(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.6(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.7(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.8(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.9(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
23.10(Internal Wiring, IS 302-1)	-	100	5% discount on BIS Sealed Sample
24.1(Components, IS 302-1)	-	100	5% discount on BIS Sealed Sample
24.2(Components, IS 302-1)	-	100	5% discount on BIS Sealed Sample
24.5(Components, IS 302-1)	-	100	5% discount on BIS Sealed Sample
24.6(Components, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount on BIS Sealed Sample
26(Terminals for External Conductors, IS 302-1)	-	100	5% discount on BIS Sealed Sample
27(Provision for Earthing, IS 302-1)	-	1000	5% discount on BIS Sealed Sample
27.2(Provision for Earthing, IS 302-1)	-	100	5% discount on BIS Sealed Sample
27.3(Provision for Earthing, IS 302-1)	-	100	5% discount on BIS Sealed Sample
27.4(Provision for Earthing, IS 302-1)	-	100	5% discount on BIS Sealed Sample
27.5(Provision for Earthing, IS 302-1)	-	100	5% discount on BIS Sealed Sample
28(Screws & Connections, IS 302-1)	-	1000	5% discount on BIS Sealed Sample
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	5% discount on BIS Sealed Sample
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	5% discount on BIS Sealed Sample
30.1(Resistance to Heat and Fire, IS 302-1)	-	1100	5% discount on BIS Sealed Sample
30.2(Resistance to Heat and Fire, IS 302-1)	-	100	5% discount on BIS Sealed Sample
31(Resistance of Rusting, IS 302-1)	-	1000	5% discount on BIS Sealed Sample
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1100	5% discount on BIS Sealed Sample
4(GENERAL REQUIREMENTS)	-	100	5% discount on BIS Sealed Sample
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	5% discount on BIS Sealed Sample
27(Provision for Earthing)	-	100	5% discount on BIS Sealed Sample
29(Clearances, Creepage distances and Solid Insulation)	-	100	5% discount on BIS Sealed Sample
6(Classification- IS 302-1 )	-	-	-
6(Classification- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.101(Marking)	-	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15(Moisture Resistance, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
19.7(Abnormal Operation, IS 302-1)	-	-	-
19.8(Abnormal Operation, IS 302-1)	-	-	-
19.9(Abnormal Operation, IS 302-1)	-	-	-
19.1(Abnormal Operation, IS 302-1)	-	-	-
19.101(Abnormal Operation)	-	-	-
19.102(Abnormal Operation)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.101(Stability & Mechanical Hazards)	-	-	-
20.102(Stability & Mechanical Hazards)	-	-	-
20.103(Stability & Mechanical Hazards)	-	-	-
20.104(Stability & Mechanical Hazards)	-	-	-
20.105(Stability & Mechanical Hazards)	-	-	-
20.106(Stability & Mechanical Hazards)	-	-	-
20.107(Stability & Mechanical Hazards)	-	-	-
20.108(Stability & Mechanical Hazards)	-	-	-
20.109(Stability & Mechanical Hazards)	-	-	-
20.110(Stability & Mechanical Hazards)	-	-	-
20.111(Stability & Mechanical Hazards)	-	-	-
20.112(Stability & Mechanical Hazards)	-	-	-
20.113(Stability & Mechanical Hazards)	-	-	-
20.114(Stability & Mechanical Hazards)	-	-	-
20.115(Stability & Mechanical Hazards)	-	-	-
20.116(Stability & Mechanical Hazards)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
22(Construction, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22.102(Construction)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
24.1(Components, IS 302-1)	-	-	-
24.2(Components, IS 302-1)	-	-	-
24.5(Components, IS 302-1)	-	-	-
24.6(Components, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
27(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	-	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	-	-
4(GENERAL REQUIREMENTS)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
27(Provision for Earthing)	-	-	-
29(Clearances, Creepage distances and Solid Insulation)	-	-	-

21 Aug, 2029

-
Included w.e.f-25.09.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

All

124000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	10000	-
Clause 4.2, Annex B(Steady state power consumption)	-	15000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	15000	-
Clause 4.4, Annex D(Defrost Frequency)	-	20000	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	10000	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	18000	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	18000	-
Clause 4.8, Annex H(Volume determination)	-	10000	-
Clause 4.8.1, Annex H(Rated total volume)	-	10000	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	10000	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	18000	-

21 Aug, 2029

-
-

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

All

295000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	52000	-
7(Cooling Capacity Test)	-	38000	-
8(Freezing Capacity Test)	-	40000	-
9("Automatic Ice-Making Capacity Test")	-	38000	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	38000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	38000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	38000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	38000	-

21 Aug, 2029

-
-

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

All

195000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	2000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	7000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	5000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	15000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	45000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	7000	-
14(Ice-Making Test (If Applicable))	-	30000	-
15(Test For Absence Of Odour And Taste)	-	45000	-
16(Safety Requirements)	-	45000	-

21 Aug, 2029

-
-

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

All

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	600	-
Cl. 5.3.2(Filling Requirements)	-	500	-
Cl. 5.3.2(Filling Requirements)	-	500	-
Cl. 5.3.2(Filling Requirements)	-	500	-
Cl. 5.3.2(Filling Requirements)	-	500	-
Cl. 5.3.2(Filling Requirements)	-	500	-
Cl. 5.3.2(Filling Requirements)	-	500	-
Cl. 5.3.3(Capacities)	-	100	-
Cl. 5.3.3(Capacities)	-	100	-
Cl. 5.3.3(Capacities)	-	100	-
Cl. 5.3.3(Capacities)	-	100	-
Cl. 5.3.3(Capacities)	-	100	-
Cl. 5.3.3(Capacities)	-	100	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	400	-
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	400	-
Cl. 7.1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	400	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	-
Cl. 7.3(Resistance to Temperature changes)	-	2500	-
Cl 7.4.3( Leakage Test)	-	500	-
Cl 7.5.1(Impact Resistance Test)	-	1500	-
Cl 7.5.2(Vibration Resistance Test)	-	1500	-
Cl 7.6(Resistance to Corrosion)	-	11000	-
Cl 7.7(Tapping Test)	-	1200	-
Cl 7.8(Intermittent Discharge Test)	-	1500	-
Cl 7.8(Intermittent Discharge Test)	-	1500	-
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	13500	A Class: 1A-₹13500, 2A-₹16500, 3A-₹19500, 4A-₹26500, 6A-₹32500, 10A-₹38000, 15A-₹50000, 20A-₹72000 B Class: 8B-₹6500, 13B-₹8000, 21B-₹10500, 34B-₹16000, 55B-₹36500, 70B-₹42500, 89B-₹51000, 113B-₹58000, 144B-₹68000, 183B-₹75000, 233B-₹84000
Cl 8.6(Electrical Conductivity of Extinguisher Discharge)	-	30000	-
Cl 9(CONSTRUCTION REQUIREMENTS)	-	300	-
Cl 9.2.2(Burst Test)	-	3000	-
Cl 9.2.3(Crushing Test)	-	1000	-
Cl 9.2.4(Pressure Cycling Test)	-	3200	-
Cl 9.2.5(Welded Low Carbon Steel Cylinder)	-	600	-
Cl 9.2.6(Stainless Steel Cylinders)	-	600	-
Cl 9.2.7(Aluminium Cylinders)	-	600	-
Cl 9.3(Carrying Handle)	-	500	-
Cl 9.4(Mounting)	-	500	-
Cl 9.5(Caps, Valves and Closures)	-	1500	-
Cl 9.7.1(Requirements for Plastics Components)	-	4000	-
Cl 9.7.2(Requirements for Plastics Components)	-	1500	-
Cl 9.7.3(Requirements for Plastics Components)	-	4000	-
Cl 9.8(Hose Assemblies)	-	4000	-
Cl 9.8(Hose Assemblies)	-	4000	-
Cl 9.9 - Table 10(Method of Operation)	-	1000	-
Cl 9.10(Safety-Locking Devices)	-	1000	-
Cl 9.11.1(Requirements for Pressure Gauges and Indicators for Low-Pressure Extinguishers)	-	1000	-
Cl 9.11.2(Calibration Test - Gauges and Indicators)	-	4000	-
Cl 9.11.3(Burst Strength Test — Gauges and Indicators)	-	1000	-
Cl 9.11.4(Water Resistance Test — Gauges and Indicators)	-	3000	-
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	500	-
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	1500	-
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	5500	-
Cl 10(MARKING AND COLOUR)	-	500	-
9.6(Safety Device)	-	500	-
9.2.8(Composite Cylinder)	-	12000	-
9.2.7(Measure Thickness of the cylinder (Aluminium body))	-	600	-
9.2.6.3 (Measure Thickness of the cylinder (S.S. Body))	-	600	-
9.2.6.1 & 9.2.6.2 (Carbon composition of stainless steel cylinder)	-	600	-
9.2.5.3, (Measure Thickness of the cylinder)	-	600	-
9.2.5.1 & 9.2.5.2(Composition of welded low carbon steel cylinders)	-	600	-
9.2.1.7(Construction requirement for the bottom of the extinguisher)	-	200	-
9.2.1.6(Type of threads on parts made of plastic component joining metal parts)	-	200	-
9.2.1.5(Cast Analysis Certifcate)	-	200	-
9.2.1.4(Construction requirement of Neck Ring)	-	200	-
9.2.1.3(Requirement of Welding)	-	200	-
9.2.1.2(Construction requirement for stand vertically upright position)	-	200	-
9.1(General Requirements of High Pressure Extinguisher)	-	200	-
8.8(Electrical Conductivity of Extinguishers Discharge )	-	30000	-
8.1.5, 8.2.2(C) , 8.6, 8.7(Class F Splash Test)	-	6000	5F- ₹6000 15F- ₹10000 25F- ₹14000 75F- ₹25000
8.1.4 & 8.5(Class D Test fire)	-	10500	-
8.1.2, 8.2.2 b) & 8.4(Class B Fire Test)	-	6500	8B- ₹6500 13B- ₹8000 21B- ₹10500 34B- ₹16000 55B- ₹36500 70B- ₹42500 89B- ₹51000 113B- ₹58000 144B- ₹68000 183B- ₹75000 233B- ₹84000
8.1.1, 8.2.2 a) & 8.3(Class A Fire Test)	-	13500	1A- ₹13500 2A- ₹16500 3A- ₹19500 4A- ₹26500 6A- ₹32500 10A- ₹38000 15A- ₹50000 20A- ₹72000
7.6.1(Internal Corrosion Test Test is applicable only for water based & clean agent PFEs)	-	5500	-
7.6.1(External Corrosion Test for all types of extinguishers)	-	5500	-
7.4.2(Leakage Test)	-	500	-
7.4.1.(Retention of charge following partial discharge)	-	600	-
6.2(Determination of Minimum Burst Pressure)	-	200	-
6.1(Determination of Test Pressure)	-	200	-
3.6 & 9.2.1.8(Determination of Maximum Service Pressure )	-	800	-
3.5 & 9.2.1.1(Determination of Service Pressure )	-	200	-
7.6.2(Internal Corrosion Test for Extinguishers Using Water-Based Medium and Clean Agent)	-	5500	-
9.14.1(Content of Mono Ammonium Phosphate)	-	2500	-
9.14.2(Content of Sodium Bicarbonate/Potassium Picarbonate for BC Powder)	-	2000	-
9.14.3(Surface Tension of Foam Solution)	-	1000	-
9.8.2(Requirement of hose and coupling system)	-	200	-
9.8.3("Requirement of Burst Pressure of Hose fitted with shut-off nozzle ")	-	1200	-
9.8.3("Requirement of Burst Pressure of Hose fitted with shut-off nozzle for CO2 Fire Extinguisher")	-	1200	-
9.8.4(A hose assembly without a shut-off nozzle shall be capable of withstanding, without leakage, a pressure equal to the extinguisher test pressure i.e Max (1.43 × Pms , 35 bar) held for at least 30 seconds.)	-	1200	-
9.10.2(Requirement of safety device material)	-	100	-
9.10.3, 9.10.4, 9.10.5 & 9.10.6(Requirement of safety-locking pin or other device)	-	700	-

21 Aug, 2029

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	500	-
8.1,b(Marking )	-	500	-
8.1,c(Marking )	-	500	-
8.1,d(Marking )	-	500	-
8.1,e(Marking )	-	500	-
8.1,f(Marking )	-	500	-
8.1,g(Marking )	-	500	-
8.2(Marking )	-	500	-
8.3,a(Marking )	-	500	-
8.3,b(Marking )	-	500	-
8.3,c(Marking )	-	500	-
8.3,d(Marking )	-	500	-
8.3,e(Marking )	-	500	-
8.4(Marking )	-	500	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	600	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	3000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	3000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	600	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	600	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	600	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	600	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	600	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	600	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	600	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	600	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	600	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	600	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	600	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	600	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	700	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	300	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1500	-
11.2(Starting)	-	1500	-
12(Interchangeability)	-	2000	-
13(Silent Operation)	-	1500	-
14.3 & Table 1(Test for Air Performance)	-	2500	-
14.3 & Table 1(Test for Air Performance)	-	2500	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	500	-
8.1,b(Marking )	-	500	-
8.1,c(Marking )	-	500	-
8.1,d(Marking )	-	500	-
8.1,e(Marking )	-	500	-
8.1,f(Marking )	-	500	-
8.1,g(Marking )	-	500	-
8.2(Marking )	-	500	-
8.3(Marking )	-	500	-
8.3,a(Marking )	-	500	-
8.3,b(Marking )	-	500	-
8.3,c(Marking )	-	500	-
8.3,d(Marking )	-	500	-
8.3,e(Marking )	-	500	-
8.4(Marking )	-	500	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	600	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	3000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	3000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	600	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	600	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	600	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	600	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	600	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	600	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	600	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	600	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	600	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	600	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	600	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	600	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	600	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	700	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	300	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1500	-
11.2(Starting)	-	1500	-
12(Interchangeability)	-	2000	-
13(Silent Operation)	-	1500	-
14.3 & Table 1(Test for Air Performance)	-	2500	-
14.3 & Table 1(Test for Air Performance)	-	2500	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	1000	-
4(GENERAL REQUIREMENTS)	-	2000	-
5(GENERAL NOTES ON TESTS)	-	500	-
15.1, 15.2(Air delivery and service value)	-	2000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	1500	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	1500	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	300	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	300	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	300	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	500	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	500	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	500	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	500	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	500	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	500	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	500	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	500	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	500	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	500	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	1500	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	1500	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	2000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	2000	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	1000	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	600	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	1000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2000	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	2000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1500	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1500	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1500	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	1500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1500	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1500	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	600	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	600	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	600	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	600	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	600	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	600	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	600	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	600	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	600	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	600	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	600	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	600	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	600	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	600	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	600	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	600	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	600	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	500	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	700	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	700	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-

21 Aug, 2029

-
Exclusion: Cl.9 (Cl.19.11.4.1 to Cl.19.11.4.7, Cl.22.32 of IS 302 (Part 2/Sec 80) : 2017)

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

All

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	500	5% discount for BIS sealed samples
6(CLASSIFICATION)	-	500	5% discount for BIS sealed samples
7(MARKING AND INSTRUCTIONS)	-	500	5% discount for BIS sealed samples
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	5% discount for BIS sealed samples
10(POWER INPUT AND CURRENT)	-	2000	5% discount for BIS sealed samples
11(HEATING)	-	5000	5% discount for BIS sealed samples
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	5% discount for BIS sealed samples
14(TRANSIENT OVERVOLTAGES)	-	5000	5% discount for BIS sealed samples
15(MOISTURE RESISTANCE)	-	5000	5% discount for BIS sealed samples
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	5% discount for BIS sealed samples
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	2000	5% discount for BIS sealed samples
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	2000	5% discount for BIS sealed samples
18(ENDURANCE)	-	8000	5% discount for BIS sealed samples
19(ABNORMAL OPERATION)	-	5000	5% discount for BIS sealed samples
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	5% discount for BIS sealed samples
21(MECHANICAL STRENGTH)	-	2000	5% discount for BIS sealed samples
22(CONSTRUCTION)	-	2000	5% discount for BIS sealed samples
23(INTERNAL WIRING)	-	2000	5% discount for BIS sealed samples
24(COMPONENTS)	-	2000	5% discount for BIS sealed samples
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	5000	5% discount for BIS sealed samples
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	5% discount for BIS sealed samples
27(PROVISION FOR EARTHING)	-	2000	5% discount for BIS sealed samples
28(SCREWS AND CONNECTIONS)	-	1000	5% discount for BIS sealed samples
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	5% discount for BIS sealed samples
30(RESISTANCE TO HEAT AND FIRE)	-	2000	5% discount for BIS sealed samples
31(RESISTANCE TO RUSTING)	-	2000	5% discount for BIS sealed samples
19.13(ABNORMAL OPERATION)	-	2000	5% discount for BIS sealed samples
19.101(Abnormal Operation)	-	1500	5% discount for BIS sealed samples
19.102(Abnormal Operation)	-	1500	5% discount for BIS sealed samples
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-

21 Aug, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7, Annexure-R

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

All

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	500	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	500	-
21.0(Mechanical Strength)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1500	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	1500	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	500	-
7.0(Classification)	-	200	-
6.0(Marking and Instructions)	-	500	-
4(GENERAL REQUIREMENT)	-	200	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	200	-

21 Aug, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7

IS 9973 (1981)

Specification for visor for scooter helmets

All

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Impact resistance)	-	400	-
5.2(Penetration resistance)	-	400	-
5.3(Flammability)	-	1000	-
5.4.1(Distortion)	-	200	-
5.4.2(Spherical&Cylindral error)	-	1000	-
5.4.3(Prismatic Error)	-	1000	-
5.4.4(Diffuse transmittance)	-	1000	-
5.4.5(Light transmission)	-	1000	-
5.5(Field of Vision)	-	1000	-
7.0(Mass)	-	500	-
5.1(Impact resistance)	-	400	-
5.2(Penetration resistance)	-	400	-
5.3(Flammability)	-	1000	-
5.4.1(Distortion)	-	200	-
5.4.2(Spherical&Cylindral error)	-	1000	-
5.4.3(Prismatic Error)	-	1000	-
5.4.4(Diffuse transmittance)	-	1000	-
5.4.5(Light transmission)	-	1000	-
5.5(Field of Vision)	-	1000	-
7.1(Mass)	-	500	-
3(Materials)	-	200	-
4(Design)	-	200	-
6.1(Workmanship and Finish)	-	200	-
5.2.2(Cradle)	-	0	-

21 Aug, 2029

-
-

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

ALL

7750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Performance Requirements)	-	1000	-
8.5(Performance Requirements)	-	1000	-
8.4(Performance Requirements)	-	1000	-
8.3(Performance Requirements)	-	1000	-
8.2(Performance Requirements)	-	1000	-
8.1(Performance Requirements)	-	1500	-
7.1(Construction)	-	500	-
6.1(Construction)	-	100	-
5.5(Construction)	-	200	-
5.4(Construction)	-	200	-
5.3(Construction)	-	500	-
5.2(Construction)	-	500	-
5.1(Construction)	-	200	-
4.1(Sizes)	-	100	-
3.3(Material)	-	500	-
3.2(Material)	-	200	-
3.1(Material)	-	100	-

21 Aug, 2029

-
-

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

All

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	100	-
4.5(Metal Parts)	-	1000	-
4.6(Visor)	-	0	-
6.1(General)	-	100	-
6.2(Shell)	-	100	-
6.3(Protactive Padding)	-	200	-
6.4(Retention System)	-	400	-
6.7(Peripheral Vision)	-	500	-
6.8(Workmanship and Finish)	-	500	-
7.0(Tests for Helmets)	-	12000	-
7.2(Impact Absorption Test)	-	2000	-
7.3(Rigidity Test)	-	1000	-
7.4(Projections and Surface Friction Test)	-	1500	-
7.5(Dynamic Test of Retention System)	-	500	-
7.6(Audibility Test)	-	1000	-
7.7(Retention Test of Helmet)	-	1000	-
7.8(Micro-Slip Test of the Chin Strap)	-	1000	-
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	1500	-
7.10.1(Inadvertent Release by Pressure)	-	1500	-
7.10.2(Ease of Release)	-	500	-
7.10.3(Durability of Quick Release Mechanism)	-	1500	-
7.10.3(Tests for Helmets)	-	1500	-
7.10.2(Tests for Helmets)	-	500	-
7.10.1(Tests for Helmets)	-	1500	-
7.9(Tests for Helmets)	-	1500	-
7.8(Tests for Helmets)	-	1000	-
7.7(Tests for Helmets)	-	1000	-
7.6(Tests for Helmets)	-	1000	-
7.5(Tests for Helmets)	-	500	-
7.4(Tests for Helmets)	-	1500	-
7.3(Tests for Helmets)	-	1000	-
7.2(Tests for Helmets)	-	2000	-
7(Tests for Helmets)	-	12000	-
6.8(Workmanship and Finish)	-	500	-
6.7(Constructional Requirements)	-	500	-
6.4(Constructional Requirements)	-	400	-
6.3(Constructional Requirements)	-	200	-
6.2(Constructional Requirements)	-	100	-
6.1(Constructional Requirements)	-	100	-
5(Size)	-	100	-
4.6(Material)	-	0	-
4.5(Material)	-	1000	-
4.1(Material)	-	100	-

21 Aug, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

PRESTO LABORATORIES PRIVATE LIMITED

Plot No. 128,Phase 1,DLF Industrial Area, Faridabad, Faridabad, Haryana, 121003

9971459226 test@prestolaboratories.com

Scope List