BIS - LIMS (Laboratory Information Management System)

ACE TEST LAB PRIVATE LIMITED (8166826), DELHI

Industrial Plot No 69 , Khasra No.54 , Street No. 02 , G.T.K. Road Nangli Poona, New Delhi, North West, Delhi, 110036

7879793911 info@acetestlab.com

Scope List

Reset

26 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	3000	-
Cl-1.6(Marking)	-	2999.99	-
Cl-1.7(Construction)	-	3000	-
Cl-1.8(Creepage distances and clearances)	-	2999.98	-
Cl-1.9(Provision for earthing)	-	3000	-
Cl-1.10(Terminals)	-	2999.99	-
Cl-1.11(External and internal wiring)	-	2999.99	-
Cl-1.12(Protection against electric shock)	-	2999.99	-
Cl-1.13(Endurance tests and thermal tests)	-	3000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	3000	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	2999.99	-
Cl-1.16(Resistance to heat, fire and tracking)	-	2999.99	-
Cl-1.12(Protection against electric shock)	-	3000	-

07 Jan, 2027

-
Included w.e.f. 09.06.2026 Cl-1.7 (Construction) Photobiological Hazard

IS 10322 (Part 5/Sec 18) (2026)

Luminaires Part 5 Particular requirements Section 18 Luminaires for swimming pools and similar applications

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-18.4(General test requirements)	-	1000	-
Cl-18.6(Marking)	-	1000	-
Cl-18.6.2(Marking)	-	1000	-
Cl-18.7.2(Construction-mechanical strength)	-	1000	-
Cl-18.7.3(Construction-corrosion test)	-	1000	-
Cl-18.8(Creepage distances and clearances)	-	1000	-
Cl-18.10(Terminals)	-	1000	-
Cl-18.11(External and internal wiring)	-	1000	-
Cl-18.12(Protection against electric shock)	-	1000	-
Cl-18.13.2(Relevant tests)	-	1000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	1000	-
Cl-18.14.2(moisture)	-	1000	-
Cl-18.14.3(Thermal shock test)	-	1000	-
Cl-18.15(Insulation resistance and electric strength)	-	1000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	1000	-
Cl-18.4(General test requirements)	-	1000	-
Cl-18.6(Marking)	-	1000	-
Cl-18.6.2(Marking)	-	1000	-
Cl-18.7.2(Construction-mechanical strength)	-	1000	-
Cl-18.7.3(Construction-corrosion test)	-	1000	-
Cl-18.8(Creepage distances and clearances)	-	1000	-
Cl-18.10(Terminals)	-	1000	-
Cl-18.11(External and internal wiring)	-	1000	-
Cl-18.12(Protection against electric shock)	-	1000	-
Cl-18.13.2(Relevant tests)	-	1000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	1000	-
Cl-18.14.2(moisture)	-	1000	-
Cl-18.14.3(Thermal shock test)	-	1000	-
Cl-18.15(Insulation resistance and electric strength)	-	1000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	1000	-
Cl-18.4(General test requirements)	-	1000	-
Cl-18.6(Marking)	-	1000	-
Cl-18.6.2(Marking)	-	1000	-
Cl-18.7.2(Construction-mechanical strength)	-	1000	-
Cl-18.7.3(Construction-corrosion test)	-	1000	-
Cl-18.8(Creepage distances and clearances)	-	1000	-
Cl-18.10(Terminals)	-	1000	-
Cl-18.11(External and internal wiring)	-	1000	-
Cl-18.12(Protection against electric shock)	-	1000	-
Cl-18.13.2(Relevant tests)	-	1000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	1000	-
Cl-18.14.2(moisture)	-	1000	-
Cl-18.14.3(Thermal shock test)	-	1000	-
Cl-18.15(Insulation resistance and electric strength)	-	1000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	1000	-
Cl-18.4(General test requirements)	-	0	-
Cl-18.6(Marking)	-	0	-
Cl-18.6.2(Marking)	-	0	-
Cl-18.7.2(Construction-mechanical strength)	-	0	-
Cl-18.7.3(Construction-corrosion test)	-	0	-
Cl-18.8(Creepage distances and clearances)	-	0	-
Cl-18.10(Terminals)	-	0	-
Cl-18.11(External and internal wiring)	-	0	-
Cl-18.12(Protection against electric shock)	-	0	-
Cl-18.13.2(Relevant tests)	-	0	-
Cl-18.13.3(Endurance tests and thermal tests)	-	0	-
Cl-18.14.2(moisture)	-	0	-
Cl-18.14.3(Thermal shock test)	-	0	-
Cl-18.15(Insulation resistance and electric strength)	-	0	-
Cl-18.16(Resistance to heat, fire and tracking)	-	0	-
Cl-18.4(General test requirements)	-	0	-
Cl-18.6(Marking)	-	0	-
Cl-18.6.2(Marking)	-	0	-
Cl-18.7.2(Construction-mechanical strength)	-	0	-
Cl-18.7.3(Construction-corrosion test)	-	0	-
Cl-18.8(Creepage distances and clearances)	-	0	-
Cl-18.10(Terminals)	-	0	-
Cl-18.11(External and internal wiring)	-	0	-
Cl-18.12(Protection against electric shock)	-	0	-
Cl-18.13.2(Relevant tests)	-	0	-
Cl-18.13.3(Endurance tests and thermal tests)	-	0	-
Cl-18.14.2(moisture)	-	0	-
Cl-18.14.3(Thermal shock test)	-	0	-
Cl-18.15(Insulation resistance and electric strength)	-	0	-
Cl-18.16(Resistance to heat, fire and tracking)	-	0	-

07 Jan, 2027

-
Included w.e.f 03.08.2026

IS 10322 (Part 1) (2026)

Luminaires Part 1 General Requirements and Tests (second revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(General test requirements and verification)	-	400	-
Cl-6(Marking )	-	400	-
Cl-7.1(Construction- General )	-	400	-
Cl-7.2(Replaceable components)	-	400	-
Cl-7.3(Wireways)	-	400	-
Cl-7.4(Lampholders)	-	400.00	-
Cl-7.5(Starterholders)	-	400.00	-
Cl-7.6(Terminal blocks)	-	400.00	-
Cl-7.7(Terminals and supply connections)	-	400.00	-
Cl-7.8(Switches)	-	400.00	-
Cl-7.9(Insulating linings and sleeves)	-	399.99	-
Cl-7.10(Double and reinforced insulation)	-	399.99	-
Cl-7.11(Electrical connections and current-carrying parts)	-	400.00	-
Cl-7.12(Screws, connections (mechanical) and glands)	-	400.00	-
Cl-7.13(Mechanical strength)	-	399.99	-
Cl-7.15(Flammable materials)	-	400.00	-
Cl-7.16(Luminaires for mounting on normally flammable surfaces)	-	400.00	-
Cl-7.17(Drain holes)	-	399.99	-
Cl-7.18(Resistance to corrosion)	-	399.99	-
Cl-7.19(Ignitors)	-	400.00	-
Cl-7.20(Rough service luminaires)	-	399.99	-
Cl-7.21(Protective shield)	-	399.99	-
Cl-7.22(Attachments to lamps)	-	399.99	-
Cl-7.23(Semi-luminaires)	-	400.00	-
Cl-7.25(Mechanical hazard)	-	400.00	-
Cl-7.26(Short-circuit protection)	-	399.99	-
Cl-7.27(Terminal blocks with integrated screwless protective earthing contacts)	-	400.00	-
Cl-7.28(Fixing of thermal sensing controls)	-	399.99	-
Cl-7.29(Luminaires with non-replaceable light sources)	-	400.00	-
Cl-7.30(Luminaires with non-user replaceable light sources and non-user serviceable components)	-	400.00	-
Cl-7.31.2(SELV or PELV circuits)	-	400.00	-
Cl-7.31.3(FELV circuits)	-	400.00	-
Cl-7.31.5(Additional requirements for luminaires using controllable controlgear providing SELV output)	-	400.00	-
Cl-7.32(Overvoltage protective devices-General )	-	400.00	-
Cl-7.32.2(Surge protective devices (SPDs))	-	399.99	-
Cl-7.32.3(Surge protective components (SPCs))	-	400.00	-
Cl-7.33(Luminaire powered via information technology communication cabling)	-	399.98	-
Cl-7.34(Electromagnetic fields (EMF))	-	399.99	-
Cl-7.35(Protection against moving fan blades)	-	399.99	-
Cl-7.36(Track-mounted luminaires)	-	400.00	-
Cl-7.32.3.6(SPC overload test)	-	400.00	-
Cl-8.2(Supply connection and other external wiring)	-	400.00	-
Cl-8.3(Internal wiring)	-	400.00	-
Cl-8.4(Test to determine the suitability of conductors having a reduced crosssectional area)	-	399.99	-
Cl-9(Provision for earthing)	-	399.99	-
Cl-10(Protection against electric shock)	-	400.00	-
Cl-11.2(General conditions and tests for IP classification)	-	400.00	-
Cl-11.2.2(Tests for first characteristics IP numerals 2, 3 and 4)	-	399.99	-
Cl-11.2.3(Tests for first characteristic IP numeral 5 and 6)	-	399.99	-
Cl-11.2.4(Drip-proof luminaires – Tests for second characteristic IP numeral 1)	-	400.00	-
Cl-11.2.5(Drip-proof luminaires – Tests for second characteristic IP numeral 2)	-	399.99	-
Cl-11.2.6(Rain-proof luminaires – Tests for second characteristic IP numeral 3)	-	400.00	-
Cl-11.2.7(Splash-proof luminaires – Tests for second characteristic IP numeral 4)	-	399.99	-
Cl-11.2.8(Jet-proof luminaires – Tests for second characteristic IP numeral 5)	-	400.00	-
Cl-11.2.9(Powerful jet-proof luminaires – Tests for second characteristic IP numeral 6)	-	400.00	-
Cl-11.2.10(Watertight luminaires – Tests for second characteristic IP numeral 7)	-	399.99	-
Cl-11.2.11(Pressure watertight luminaires – Tests for second characteristic IP numeral 8)	-	399.99	-
Cl-11.2.12(High pressure and temperature water jet-proof luminaires – Tests for second characteristic IP numeral 9 (80 °C))	-	400.00	-
Cl-11.2.13(High pressure and cold water jet-proof luminaires – Tests for second characteristic IP numeral 9 (15 °C))	-	399.99	-
Cl-11.3(Humidity test)	-	399.99	-
Cl-12.2.2(Test – Insulation resistance)	-	400.00	-
Cl-12.2.3(Test – Electric strength)	-	399.98	-
Cl-12.3(Touch current, protective conductor current and electric burn)	-	399.98	-
Cl-13.1(Creepage distances and clearances)	-	400.00	-
Cl-14.2(Selection of lamps and controlgear)	-	399.99	-
Cl-14.3(Endurance test)	-	399.99	-
Cl-14.4(Thermal test (normal operation))	-	399.99	-
Cl-14.5(Thermal test (abnormal operation))	-	400.00	-
Cl-14.6(Thermal test (failed windings in controlgear))	-	399.98	-
Cl-14.6.2(Test for luminaires without thermal cut-outs)	-	400.00	-
Cl-14.6.3(Test for luminaires with temperature sensing controls)	-	400.00	-
Cl-14.7.2(Test for luminaires without temperature sensing controls)	-	399.99	-
Cl-14.7.3(Test for luminaires with temperature sensing controls internal or external to the controlgear or transformer)	-	400.00	-
Cl-15.2(Resistance to heat)	-	399.99	-
Cl-15.3(Resistance to flame and ignition)	-	399.99	-
Cl-15.4(Resistance to tracking)	-	400.00	-
Cl-16.1(Screw terminals- General )	-	400.00	-
Cl-16.2(General requirements and basic principles)	-	400.00	-
Cl-16.3(Mechanical requirements and tests)	-	399.98	-
Cl-17.2(General requirements)	-	400.00	-
Cl-17.3.3(Multi-conductor terminals)	-	399.99	-
Cl-17.4.1(Terminal and connections for internal wiring-Mechanical tests)	-	400.00	-
Cl-17.4.2(Terminal and connections for internal wiring-Electrical tests)	-	399.99	-
Cl-17.5.1(Terminals and connections for external wiring-Conductors)	-	399.98	-
Cl-17.5.2(Terminals and connections for external wiring-Mechanical tests)	-	399.99	-
Cl-17.5.3(Terminals and connections for external wiring-Electrical tests)	-	399.99	-
Annex A-2(Touch voltage limits)	-	400.00	-
Annex A-2(Touch current limits)	-	400.00	-
Annex B-2(Filament lamps within the scope of IEC 60432-1 and IEC 60432-2)	-	400.00	-
Annex B-3(Halogen lamps within the scope of IEC 60432-3)	-	400.00	-
Annex B-4(Tubular fluorescent and other discharge lamps)	-	400.00	-
Annex B-5(LED modules within the scope of IEC 62031)	-	400.00	-
Annex C(Abnormal circuit conditions)	-	400.00	-
Annex D-1(Draught-proof enclosure)	-	399.99	-
Annex D-2(Mounting surface)	-	400.00	-
Annex D-3(Alternative test procedure for adjustment of measured temperatures for luminaire ta rating(s))	-	400.00	-
Annex E (Determination of winding temperature rises by the increase-inresistance method)	-	400.00	-
Annex F (Test for resistance to stress corrosion of copper and copper alloys)	-	399.99	-
Annex G (Measurement of touch current and protective conductor current)	-	399.99	-
Annex K (Determination of creepage distances and clearances)	-	399.99	-
Annex P(Requirements for the identification of a family or range of luminaires for type testing)	-	399.99	-
Annex S (Alternative thermal test for thermoplastic luminaires)	-	399.99	-
Annex T (Requirements for insulation between live parts of circuits and accessible conductive parts)	-	399.99	-
Annex W (Battery/EDLC-operated luminaires)	-	399.99	-
Cl-17.3.4(Multi-way terminals)	-	1000	-
Cl-4.2(General test requirements and verification)	-	40	-
Cl-6(Marking )	-	40	-
Cl-7.1(Construction- General )	-	39.99	-
Cl-7.2(Replaceable components)	-	39.99	-
Cl-7.3(Wireways)	-	39.99	-
Cl-7.4(Lampholders)	-	39.99	-
Cl-7.5(Starterholders)	-	39.99	-
Cl-7.6(Terminal blocks)	-	39.99	-
Cl-7.7(Terminals and supply connections)	-	39.98	-
Cl-7.8(Switches)	-	40	-
Cl-7.9(Insulating linings and sleeves)	-	39.99	-
Cl-7.10(Double and reinforced insulation)	-	39.99	-
Cl-7.11(Electrical connections and current-carrying parts)	-	39.99	-
Cl-7.12(Screws, connections (mechanical) and glands)	-	39.99	-
Cl-7.13(Mechanical strength)	-	40	-
Cl-7.15(Flammable materials)	-	39.99	-
Cl-7.16(Luminaires for mounting on normally flammable surfaces)	-	39.99	-
Cl-7.17(Drain holes)	-	39.99	-
Cl-7.18(Resistance to corrosion)	-	39.99	-
Cl-7.19(Ignitors)	-	39.99	-
Cl-7.20(Rough service luminaires)	-	39.99	-
Cl-7.21(Protective shield)	-	40	-
Cl-7.22(Attachments to lamps)	-	40	-
Cl-7.23(Semi-luminaires)	-	39.99	-
Cl-7.25(Mechanical hazard)	-	39.99	-
Cl-7.26(Short-circuit protection)	-	40	-
Cl-7.27(Terminal blocks with integrated screwless protective earthing contacts)	-	39.99	-
Cl-7.28(Fixing of thermal sensing controls)	-	40	-
Cl-7.29(Luminaires with non-replaceable light sources)	-	39.99	-
Cl-7.30(Luminaires with non-user replaceable light sources and non-user serviceable components)	-	39.99	-
Cl-7.31.2(SELV or PELV circuits)	-	39.99	-
Cl-7.31.3(FELV circuits)	-	39.99	-
Cl-7.31.5(Additional requirements for luminaires using controllable controlgear providing SELV output)	-	39.99	-
Cl-7.32(Overvoltage protective devices-General )	-	39.99	-
Cl-7.32.2(Surge protective devices (SPDs))	-	39.99	-
Cl-7.32.3(Surge protective components (SPCs))	-	39.99	-
Cl-7.33(Luminaire powered via information technology communication cabling)	-	39.99	-
Cl-7.34(Electromagnetic fields (EMF))	-	39.99	-
Cl-7.35(Protection against moving fan blades)	-	39.99	-
Cl-7.36(Track-mounted luminaires)	-	39.99	-
Cl-7.32.3.6(SPC overload test)	-	40	-
Cl-8.2(Supply connection and other external wiring)	-	39.99	-
Cl-8.3(Internal wiring)	-	39.99	-
Cl-8.4(Test to determine the suitability of conductors having a reduced crosssectional area)	-	39.99	-
Cl-9(Provision for earthing)	-	39.99	-
Cl-10(Protection against electric shock)	-	39.99	-
Cl-11.2(General conditions and tests for IP classification)	-	39.99	-
Cl-11.2.2(Tests for first characteristics IP numerals 2, 3 and 4)	-	39.99	-
Cl-11.2.3(Tests for first characteristic IP numeral 5 and 6)	-	39.99	-
Cl-11.2.4(Drip-proof luminaires – Tests for second characteristic IP numeral 1)	-	39.99	-
Cl-11.2.5(Drip-proof luminaires – Tests for second characteristic IP numeral 2)	-	39.99	-
Cl-11.2.6(Rain-proof luminaires – Tests for second characteristic IP numeral 3)	-	40	-
Cl-11.2.7(Splash-proof luminaires – Tests for second characteristic IP numeral 4)	-	39.99	-
Cl-11.2.8(Jet-proof luminaires – Tests for second characteristic IP numeral 5)	-	39.99	-
Cl-11.2.9(Powerful jet-proof luminaires – Tests for second characteristic IP numeral 6)	-	39.99	-
Cl-11.2.10(Watertight luminaires – Tests for second characteristic IP numeral 7)	-	40	-
Cl-11.2.11(Pressure watertight luminaires – Tests for second characteristic IP numeral 8)	-	39.99	-
Cl-11.2.12(High pressure and temperature water jet-proof luminaires – Tests for second characteristic IP numeral 9 (80 °C))	-	39.99	-
Cl-11.2.13(High pressure and cold water jet-proof luminaires – Tests for second characteristic IP numeral 9 (15 °C))	-	39.99	-
Cl-11.3(Humidity test)	-	40	-
Cl-12.2.2(Test – Insulation resistance)	-	39.99	-
Cl-12.2.3(Test – Electric strength)	-	39.99	-
Cl-12.3(Touch current, protective conductor current and electric burn)	-	39.99	-
Cl-13.1(Creepage distances and clearances)	-	39.99	-
Cl-14.2(Selection of lamps and controlgear)	-	40	-
Cl-14.3(Endurance test)	-	39.99	-
Cl-14.4(Thermal test (normal operation))	-	39.99	-
Cl-14.5(Thermal test (abnormal operation))	-	40	-
Cl-14.6(Thermal test (failed windings in controlgear))	-	39.99	-
Cl-14.6.2(Test for luminaires without thermal cut-outs)	-	39.99	-
Cl-14.6.3(Test for luminaires with temperature sensing controls)	-	39.99	-
Cl-14.7.2(Test for luminaires without temperature sensing controls)	-	39.99	-
Cl-14.7.3(Test for luminaires with temperature sensing controls internal or external to the controlgear or transformer)	-	39.98	-
Cl-15.2(Resistance to heat)	-	39.98	-
Cl-15.3(Resistance to flame and ignition)	-	39.99	-
Cl-15.4(Resistance to tracking)	-	40	-
Cl-16.1(Screw terminals- General )	-	39.99	-
Cl-16.2(General requirements and basic principles)	-	39.99	-
Cl-16.3(Mechanical requirements and tests)	-	40	-
Cl-17.2(General requirements)	-	40	-
Cl-17.3.3(Multi-conductor terminals)	-	40	-
Cl-17.4.1(Terminal and connections for internal wiring-Mechanical tests)	-	40	-
Cl-17.4.2(Terminal and connections for internal wiring-Electrical tests)	-	40	-
Cl-17.5.1(Terminals and connections for external wiring-Conductors)	-	40	-
Cl-17.5.2(Terminals and connections for external wiring-Mechanical tests)	-	39.99	-
Cl-17.5.3(Terminals and connections for external wiring-Electrical tests)	-	40	-
Annex A-2(Touch voltage limits)	-	39.99	-
Annex A-2(Touch current limits)	-	39.98	-
Annex B-2(Filament lamps within the scope of IEC 60432-1 and IEC 60432-2)	-	39.99	-
Annex B-3(Halogen lamps within the scope of IEC 60432-3)	-	39.98	-
Annex B-4(Tubular fluorescent and other discharge lamps)	-	39.99	-
Annex B-5(LED modules within the scope of IEC 62031)	-	39.99	-
Annex C(Abnormal circuit conditions)	-	40	-
Annex D-1(Draught-proof enclosure)	-	39.99	-
Annex D-2(Mounting surface)	-	39.99	-
Annex D-3(Alternative test procedure for adjustment of measured temperatures for luminaire ta rating(s))	-	39.99	-
Annex E (Determination of winding temperature rises by the increase-inresistance method)	-	39.99	-
Annex F (Test for resistance to stress corrosion of copper and copper alloys)	-	39.99	-
Annex G (Measurement of touch current and protective conductor current)	-	39.99	-
Annex K (Determination of creepage distances and clearances)	-	39.99	-
Annex P(Requirements for the identification of a family or range of luminaires for type testing)	-	39.99	-
Annex S (Alternative thermal test for thermoplastic luminaires)	-	39.99	-
Annex T (Requirements for insulation between live parts of circuits and accessible conductive parts)	-	40	-
Annex W (Battery/EDLC-operated luminaires)	-	39.99	-
Cl-17.3.4(Multi-way terminals)	-	40	-
Cl-4.2(General test requirements and verification)	-	40	-
Cl-6(Marking )	-	39.99	-
Cl-7.1(Construction- General )	-	39.99	-
Cl-7.2(Replaceable components)	-	39.99	-
Cl-7.3(Wireways)	-	39.99	-
Cl-7.4(Lampholders)	-	39.99	-
Cl-7.5(Starterholders)	-	39.99	-
Cl-7.6(Terminal blocks)	-	40	-
Cl-7.7(Terminals and supply connections)	-	39.99	-
Cl-7.8(Switches)	-	39.99	-
Cl-7.9(Insulating linings and sleeves)	-	39.99	-
Cl-7.10(Double and reinforced insulation)	-	39.99	-
Cl-7.11(Electrical connections and current-carrying parts)	-	39.99	-
Cl-7.12(Screws, connections (mechanical) and glands)	-	39.99	-
Cl-7.13(Mechanical strength)	-	40	-
Cl-7.15(Flammable materials)	-	39.99	-
Cl-7.16(Luminaires for mounting on normally flammable surfaces)	-	39.99	-
Cl-7.17(Drain holes)	-	40	-
Cl-7.18(Resistance to corrosion)	-	39.99	-
Cl-7.19(Ignitors)	-	39.99	-
Cl-7.20(Rough service luminaires)	-	39.98	-
Cl-7.21(Protective shield)	-	39.99	-
Cl-7.22(Attachments to lamps)	-	39.99	-
Cl-7.23(Semi-luminaires)	-	40	-
Cl-7.25(Mechanical hazard)	-	39.99	-
Cl-7.26(Short-circuit protection)	-	39.99	-
Cl-7.27(Terminal blocks with integrated screwless protective earthing contacts)	-	39.99	-
Cl-7.28(Fixing of thermal sensing controls)	-	39.99	-
Cl-7.29(Luminaires with non-replaceable light sources)	-	39.99	-
Cl-7.30(Luminaires with non-user replaceable light sources and non-user serviceable components)	-	39.99	-
Cl-7.31.2(SELV or PELV circuits)	-	39.99	-
Cl-7.31.3(FELV circuits)	-	39.99	-
Cl-7.31.5(Additional requirements for luminaires using controllable controlgear providing SELV output)	-	39.99	-
Cl-7.32(Overvoltage protective devices-General )	-	39.99	-
Cl-7.32.2(Surge protective devices (SPDs))	-	39.99	-
Cl-7.32.3(Surge protective components (SPCs))	-	39.99	-
Cl-7.33(Luminaire powered via information technology communication cabling)	-	39.99	-
Cl-7.34(Electromagnetic fields (EMF))	-	39.99	-
Cl-7.35(Protection against moving fan blades)	-	39.99	-
Cl-7.36(Track-mounted luminaires)	-	40	-
Cl-7.32.3.6(SPC overload test)	-	40	-
Cl-8.2(Supply connection and other external wiring)	-	40	-
Cl-8.3(Internal wiring)	-	39.99	-
Cl-8.4(Test to determine the suitability of conductors having a reduced crosssectional area)	-	39.99	-
Cl-9(Provision for earthing)	-	40	-
Cl-10(Protection against electric shock)	-	40	-
Cl-11.2(General conditions and tests for IP classification)	-	40	-
Cl-11.2.2(Tests for first characteristics IP numerals 2, 3 and 4)	-	40	-
Cl-11.2.3(Tests for first characteristic IP numeral 5 and 6)	-	40	-
Cl-11.2.4(Drip-proof luminaires – Tests for second characteristic IP numeral 1)	-	39.99	-
Cl-11.2.5(Drip-proof luminaires – Tests for second characteristic IP numeral 2)	-	39.99	-
Cl-11.2.6(Rain-proof luminaires – Tests for second characteristic IP numeral 3)	-	39.99	-
Cl-11.2.7(Splash-proof luminaires – Tests for second characteristic IP numeral 4)	-	39.99	-
Cl-11.2.8(Jet-proof luminaires – Tests for second characteristic IP numeral 5)	-	39.99	-
Cl-11.2.9(Powerful jet-proof luminaires – Tests for second characteristic IP numeral 6)	-	40	-
Cl-11.2.10(Watertight luminaires – Tests for second characteristic IP numeral 7)	-	39.99	-
Cl-11.2.11(Pressure watertight luminaires – Tests for second characteristic IP numeral 8)	-	39.99	-
Cl-11.2.12(High pressure and temperature water jet-proof luminaires – Tests for second characteristic IP numeral 9 (80 °C))	-	39.99	-
Cl-11.2.13(High pressure and cold water jet-proof luminaires – Tests for second characteristic IP numeral 9 (15 °C))	-	39.99	-
Cl-11.3(Humidity test)	-	40	-
Cl-12.2.2(Test – Insulation resistance)	-	40	-
Cl-12.2.3(Test – Electric strength)	-	39.99	-
Cl-12.3(Touch current, protective conductor current and electric burn)	-	39.99	-
Cl-13.1(Creepage distances and clearances)	-	39.99	-
Cl-14.2(Selection of lamps and controlgear)	-	39.99	-
Cl-14.3(Endurance test)	-	39.99	-
Cl-14.4(Thermal test (normal operation))	-	39.99	-
Cl-14.5(Thermal test (abnormal operation))	-	40	-
Cl-14.6(Thermal test (failed windings in controlgear))	-	39.99	-
Cl-14.6.2(Test for luminaires without thermal cut-outs)	-	39.99	-
Cl-14.6.3(Test for luminaires with temperature sensing controls)	-	40	-
Cl-14.7.2(Test for luminaires without temperature sensing controls)	-	39.99	-
Cl-14.7.3(Test for luminaires with temperature sensing controls internal or external to the controlgear or transformer)	-	39.99	-
Cl-15.2(Resistance to heat)	-	39.99	-
Cl-15.3(Resistance to flame and ignition)	-	39.99	-
Cl-15.4(Resistance to tracking)	-	39.99	-
Cl-16.1(Screw terminals- General )	-	39.99	-
Cl-16.2(General requirements and basic principles)	-	39.99	-
Cl-16.3(Mechanical requirements and tests)	-	39.99	-
Cl-17.2(General requirements)	-	39.99	-
Cl-17.3.3(Multi-conductor terminals)	-	39.99	-
Cl-17.4.1(Terminal and connections for internal wiring-Mechanical tests)	-	39.99	-
Cl-17.4.2(Terminal and connections for internal wiring-Electrical tests)	-	39.99	-
Cl-17.5.1(Terminals and connections for external wiring-Conductors)	-	39.99	-
Cl-17.5.2(Terminals and connections for external wiring-Mechanical tests)	-	39.99	-
Cl-17.5.3(Terminals and connections for external wiring-Electrical tests)	-	39.99	-
Annex A-2(Touch voltage limits)	-	40	-
Annex A-2(Touch current limits)	-	39.99	-
Annex B-2(Filament lamps within the scope of IEC 60432-1 and IEC 60432-2)	-	39.98	-
Annex B-3(Halogen lamps within the scope of IEC 60432-3)	-	39.99	-
Annex B-4(Tubular fluorescent and other discharge lamps)	-	39.99	-
Annex B-5(LED modules within the scope of IEC 62031)	-	39.99	-
Annex C(Abnormal circuit conditions)	-	39.99	-
Annex D-1(Draught-proof enclosure)	-	39.99	-
Annex D-2(Mounting surface)	-	39.99	-
Annex D-3(Alternative test procedure for adjustment of measured temperatures for luminaire ta rating(s))	-	39.99	-
Annex E (Determination of winding temperature rises by the increase-inresistance method)	-	39.99	-
Annex F (Test for resistance to stress corrosion of copper and copper alloys)	-	39.99	-
Annex G (Measurement of touch current and protective conductor current)	-	39.98	-
Annex K (Determination of creepage distances and clearances)	-	39.99	-
Annex P(Requirements for the identification of a family or range of luminaires for type testing)	-	39.99	-
Annex S (Alternative thermal test for thermoplastic luminaires)	-	39.98	-
Annex T (Requirements for insulation between live parts of circuits and accessible conductive parts)	-	39.99	-
Annex W (Battery/EDLC-operated luminaires)	-	39.99	-
Cl-17.3.4(Multi-way terminals)	-	40	-

07 Jan, 2027

-
Included w.e.f. 05.08.2026 Exclusion: "Cl-7.24.1 (Actinic UV hazards for skin and eye (200 nm to 400 nm)) Cl-7.24.2 (UV-A hazard for the eye lens (315 nm to 400 nm)) Cl-7.24.3 (Retinal blue light hazard) Cl-7.24.4 (Retinal thermal hazard (380 nm to 1 400 nm)) Cl-7.24.5 (Infrared hazard for the eye (780 nm to 3 000 nm)) Cl-7.24.6 (Thermal hazard for the skin (380 nm to 3 000 nm))"

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

Lithium System Cells and Batteries

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
5.8(Battery Safety Components)	-	0	-
6(Type Test and Sample Size)	-	2000	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	9000	-
7.2(Intended Use)	-	8000	-
7.3(Reasonably foreseeable misuse)	-	33000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	36000	-

07 Jan, 2027

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

Excluding Pyrolytics self-cleaning ovens

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	500	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	500	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
18.0(Endurance test)	-	500	-
19.0(Abnormal Operations)	-	500	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	500	-
22.111(Pyrolytic self-cleaning)	-	0	-
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	500	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	500	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
18.0(Endurance test)	-	500	-
19.0(Abnormal Operations)	-	500	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	1500	-
22.111(Pyrolytic self-cleaning)	-	0	-

07 Jan, 2027

-
Included w.e.f 24.03.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 32.0 (Radiation, Toxicity and Similar hazards)

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1730	-
7(Marking and instructions)	-	1730	-
8(Protection against live parts)	-	1730	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1730	-
10(POWER INPUT AND CURRENT)	-	1730	-
11(HEATING)	-	1730	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1730	-
14(IMPULSE VOLTAGE TEST)	-	1730	-
15(HUMIDITY TREATMENT TEST)	-	1730	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1730	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1730	-
18(ENDURANCE)	-	1730	-
19(ABNORMAL OPERATION)	-	1730	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1730	-
21(MECHANICAL STRENGTH)	-	1730	-
22(CONSTRUCTION)	-	1730	-
23(INTERNAL WIRING)	-	1730	-
24(COMPONENTS)	-	1730	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1730	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1730	-
27(PROVISION FOR EARTHING)	-	1730	-
28(SCREWS AND CONNECTIONS)	-	1730	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1730	-
30(RESISTANCE TO HEAT AND FIRE)	-	1730	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1730	-
31(RESISTANCE TO RUSTING)	-	1750	-

07 Jan, 2027

-
Included w.e.f 24.03.2026 Exclusion:Cl 19.11.4.1-19.11.4.7(EMI/EMC), 22.46 (Software), 22.32 (Oxygen bomb for rubber material)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	400	-
6(Classification- IS 302-1)	-	400	-
5(General conditions for the tests)	-	400	-
11.8(Temperature rise)	-	400	-
11.7(Duration corresponding)	-	400	-
11.6(Combined appliances)	-	400	-
11.5(Motor-operated appliances)	-	400	-
11.4(Heating appliances)	-	400	-
8.1.5(Live parts of built-in appliances)	-	400	-
17(Overload protection of transformers and associated circuits)	-	400	-
16(Leakage current and electric strength)	-	400	-
4(General requirement)	-	400	-
31(Resistance to Rusting)	-	400	-
30.2(Needle Flame Test)	-	400	-
30.2(Glow Wire Test)	-	400	-
30.1(Ball pressure test)	-	400	-
29(clearance, creepage distances and solid insulation)	-	400	-
28(Screw test and connections)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	400	-
26(Terminals for external conductors)	-	400	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
24(Components)	-	400	-
23.1(Internal Wiring, IS 302-1)	-	400	-
22.1(Construction, IS 302-1)	-	400	-
21.1(Mechanical Strength, IS 302-1)	-	400	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	400	-
19(Abnormal Operation)	-	400	-
17(Over Load Protection of Transformers and associated circuits)	-	400	-
16.3(Electric Strength (after clause 15 and 16.2))	-	400	-
16.2(Leakage Current (after Clause 15))	-	400	-
16.1(General)	-	400	-
16.0(General)	-	400	-
15.3(Humidity Test)	-	400	-
15.2(Spillage Test)	-	400	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	400	-
15.0(Moisture resistance)	-	400	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	400	-
13.2(Leakage current at operating temperature)	-	400	-
13(Leakage current and electric strength at operating temperature)	-	400	-
11.3(Heating)	-	400	-
11.2(General)	-	400	-
11.1(General)	-	400	-
10.2(Current input)	-	400	-
10.1(Power input)	-	400	-
9(Starting of motor operation test requirements and tests)	-	400	-
8.1.4(Protection against live parts against protective impedance)	-	400	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	400	-
8.1.2(Protection against live parts in openings)	-	400	-
8.1.1(Protection against live parts in all positions)	-	400	-
7(Marking and instructions)	-	400	-
A.2(Earth continuity test)	-	400	-
Annex C(Ageing test on motors)	-	400	-
Annex D(Thermal motor protectors)	-	400	-
15.2(Moisture resistance)	-	400	-
19.17(Abnormal Operation, IS 302-1)	-	400	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	400	-
21.2(Mechanical Strength, IS 302-1)	-	400	-
21.3(Mechanical Strength, IS 302-1)	-	400	-
22.5(Construction)	-	400	-
22.6(Construction, IS 302-1)	-	400	-
22.11(Construction, IS 302-1)	-	400	-
22.42(Construction)	-	400	-
23.3(Internal Wiring, IS 302-1)	-	400	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	400	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
26.5(Terminals for external conductors)	-	400	-
27.5(Provision for Earthing, IS 302-1)	-	400	-
28.1(Screws and connections)	-	400	-
22.2(Construction, IS 302-1)	-	400	-
22.3(Construction, IS 302-1)	-	400	-
B.22.4(Construction, IS 302-1)	-	400	-
B.22.5(Construction, IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.3(Marking- IS 302-1)	-	400	-
7.4(Marking- IS 302-1)	-	400	-
7.5(Marking- IS 302-1)	-	400	-
7.6(Marking- IS 302-1)	-	400	-
7.7(Marking- IS 302-1)	-	400	-
7.8(Marking- IS 302-1)	-	400	-
7.9(Marking- IS 302-1)	-	400	-
7.1O(Marking- IS 302-1)	-	400	-
7.11(Marking- IS 302-1)	-	400	-
7.12(Marking- IS 302-2-15)	-	400	-
7.13(Marking- IS 302-1)	-	400	-
7.15(Marking- IS 302-1)	-	400	-
6(Classification- IS 302-1)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	55	-
11(Heating, IS 302-1)	-	55	-
19.7(Abnormal Operation, IS 302-1)	-	55	-
19.8(Abnormal Operation, IS 302-1)	-	55	-
19.9(Abnormal Operation, IS 302-1)	-	55	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	55	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	55	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	55	-
19.17(Abnormal Operation, IS 302-1)	-	55	-
22.7(Construction, IS 302-1)	-	55	-
22.9(Construction, IS 302-1)	-	55	-
22.10(Construction, IS 302-1)	-	55	-
22.12(Construction, IS 302-1)	-	55	-
22.14(Construction, IS 302-1)	-	55	-
22.15(Construction, IS 302-1)	-	55	-
22.18(Construction, IS 302-1)	-	55	-
22.19(Construction, IS 302-1)	-	55	-
22.21(Construction, IS 302-1)	-	55	-
22.22(Construction, IS 302-1)	-	55	-
22.24(Construction, IS 302-1)	-	55	-
22.25(Construction, IS 302-1)	-	55	-
22.28(Construction, IS 302-1)	-	55	-
22.31(Construction, IS 302-1)	-	55	-
22.34(Construction, IS 302-1)	-	55	-
22.35(Construction, IS 302-1)	-	55	-
22.36(Construction, IS 302-1)	-	55	-
22.37(Construction, IS 302-1)	-	55	-
22.38(Construction, IS 302-1)	-	55	-
22.40(Construction, IS 302-1)	-	55	-
22.41(Construction, IS 302-1)	-	55	-
22.43(Construction, IS 302-1)	-	55	-
22.43(Construction, IS 302-1)	-	55	-
22.44(Construction, IS 302-1)	-	55	-
22.49(Construction, IS 302-1)	-	55	-
22.54(Construction, IS 302-1)	-	55	-
22.55(Construction, IS 302-1)	-	55	-
22.58(Construction, IS 302-1)	-	55	-
22.59(Construction, IS 302-1)	-	55	-
22.60(Construction, IS 302-1)	-	55	-
22.61(Construction, IS 302-1)	-	55	-
23.2(Internal Wiring, IS 302-1)	-	55	-
23.4(Internal Wiring, IS 302-1)	-	55	-
23.6(Internal Wiring, IS 302-1)	-	55	-
23.7(Internal Wiring, IS 302-1)	-	55	-
23.8(Internal Wiring, IS 302-1)	-	55	-
23.9(Internal Wiring, IS 302-1)	-	55	-
23.10(Internal Wiring, IS 302-1)	-	55	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
27.2(Provision for Earthing, IS 302-1)	-	55	-
27.3(Provision for Earthing, IS 302-1)	-	55	-
27.4(Provision for Earthing, IS 302-1)	-	55	-
27.6(Provision for Earthing, IS 302-1)	-	55	-
18(Endurance)	-	55	-
18(Endurance)	-	1205	-

07 Jan, 2027

-
Included w.e.f 24.03.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 22.16 (Construction), 22.32 (Construction, IS 302-1), 24 (Components)32.2 (Radiation, toxicity and similar hazards, is 302-1)

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

Audio/Video information Communication Technology Equipmnet Part 1 Safety Requirmnets

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	600	-
Cl-4.2(Energy source classifications)	-	600	-
Cl-4.3(Protection against energy sources)	-	600	-
Cl-4.4(Safeguards)	-	600	-
Cl-4.5(Explosion)	-	600	-
Cl-4.6(Fixing of conductors and conductive parts)	-	600	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	600	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	600	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	600	-
Cl-4.10(Components requirements)	-	600	-
Cl-5.1(General- Electrically-caused injury)	-	600	-
Cl-5.2(Classification and limits of electrical energy sources)	-	600	-
Cl-5.3(Protection against electrical energy sources)	-	600	-
Cl-5.4(Insulation materials and requirements)	-	600	-
Cl-5.5(Components as safeguards)	-	600	-
Cl-5.6(Protective conductor)	-	600	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	600	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	600	-
Cl-6.1(General- Electrically-caused fire)	-	600	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	600	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	600	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	600	-
Cl-6.5(Internal and external wiring)	-	600	-
Cl-7.1(General- Injury caused by hazardous substances)	-	600	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	600	-
Cl-7.3(Ozone exposure)	-	600	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	600	-
Cl-7.5(Use of instructional safeguards and instructions)	-	600	-
Cl-8.1(General- Mechanically-caused injury)	-	600	-
Cl-8.2(Mechanical energy source classifications)	-	600	-
Cl-8.3(Safeguards against mechanical energy sources)	-	600	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	600	-
Cl-8.5(Safeguards against moving parts)	-	600	-
Cl-8.6(Stability of equipment)	-	600	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	600	-
Cl-8.8(Handle strength)	-	600	-
Cl-8.9(Wheels or casters attachment requirements)	-	600	-
Cl-8.10(Carts, stands, and similar carriers)	-	600	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	600	-
Cl-9.1(General-Thermal burn injury)	-	600	-
Cl-9.2(Thermal energy source classifications)	-	600	-
Cl-9.3(Touch temperature limits)	-	600	-
Cl-9.4(Safeguards against thermal energy sources)	-	600	-
Cl-9.5(Requirements for safeguards)	-	600	-
Cl-9.6(Requirements for wireless power transmitters)	-	600	-
Cl-10.1(General-Radiation)	-	600	-
Annex A(Examples of equipment within the scope of this document)	-	600	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	600	-
Annex B-2(Normal operating conditions)	-	600	-
Annex B-3(Simulated abnormal operating conditions)	-	600	-
Annex B-4(Simulated single fault conditions)	-	600	-
Annex D-1(Impulse test generators)	-	600	-
Annex D-2(Antenna interface test generator)	-	600	-
Annex E-1(Electrical energy source classification for audio signals)	-	600	-
Annex E-2(Audio signals used during test)	-	600	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	600	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	600	-
Annex F-2(Letter symbols and graphical symbols)	-	600	-
Annex F-3(Equipment markings)	-	600	-
Annex F-4(Instructions)	-	600	-
Annex F-5(Instructional safeguards)	-	600	-
Annex G-4(Connectors)	-	600	-
Annex G-5(Wound components)	-	600	-
Annex G-6(Wire insulation)	-	600	-
Annex G-7(Mains power supply cords and interconnection cables)	-	600	-
Annex G-9(Integrated circuit (IC) current limiters)	-	600	-
Annex G-10(Resistors)	-	600	-
Annex G-11(Capacitors and RC units)	-	600	-
Annex G-13(Printed boards)	-	600	-
Annex G-14(Coatings on component terminals)	-	600	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	600	-
Annex H-1(General- Criteria for telephone ringing signals)	-	600	-
Annex H-2(Method A)	-	600	-
Annex H-3(Method B)	-	600	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	600	-
Annex L-1(General requirements)	-	600	-
Annex L-2(Permanently connected equipment)	-	600	-
Annex L-3()	-	600	-
Annex L-4(Single-phase equipment)	-	600	-
Annex L-5(Three-phase equipment)	-	600	-
Annex L-6(Switches as disconnect devices)	-	600	-
Annex L-7(Plugs as disconnect devices)	-	600	-
Annex L-8(Multiple power sources)	-	600	-
Annex L-9(Compliance criteria)	-	600	-
Annex M-1(General requirements)	-	600	-
Annex M-2(Safety of batteries and their cells)	-	600	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	600	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	600	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	600	-
Annex M-6(Safeguards against short-circuits)	-	600	-
Annex M-9(Preventing electrolyte spillage)	-	600	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	600	-
Annex N(Electrochemical potentials (V))	-	600	-
Annex O(Measurement of creepage distances and clearances)	-	600	-
Annex P-1(General-Safeguards against conductive objects)	-	600	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	600	-
Annex P-3(Safeguards against spillage of internal liquids)	-	600	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	600	-
Annex Q-1(Limited power source)	-	600	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	600	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	600	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	600	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	600	-
Annex S-4(Flammability classification of materials)	-	600	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	600	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	600	-
Annex T-1(General-Mechanical strength tests)	-	600	-
Annex T-2(Steady force test, 10 N)	-	600	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex Y-2(Resistance to UV radiation)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex Y-3(Resistance to corrosion)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-4.2(Energy source classifications)	-	0	-
Cl-4.3(Protection against energy sources)	-	0	-
Cl-4.4(Safeguards)	-	0	-
Cl-4.5(Explosion)	-	0	-
Cl-4.6(Fixing of conductors and conductive parts)	-	0	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	0	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	0	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	0	-
Cl-4.10(Components requirements)	-	0	-
Cl-5.1(General- Electrically-caused injury)	-	0	-
Cl-5.2(Classification and limits of electrical energy sources)	-	0	-
Cl-5.3(Protection against electrical energy sources)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	0	-
Cl-5.5(Components as safeguards)	-	0	-
Cl-5.6(Protective conductor)	-	0	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	0	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	0	-
Cl-6.1(General- Electrically-caused fire)	-	0	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	0	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	0	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	0	-
Cl-6.5(Internal and external wiring)	-	0	-
Cl-7.1(General- Injury caused by hazardous substances)	-	0	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	0	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	0	-
Cl-7.5(Use of instructional safeguards and instructions)	-	0	-
Cl-8.1(General- Mechanically-caused injury)	-	0	-
Cl-8.2(Mechanical energy source classifications)	-	0	-
Cl-8.3(Safeguards against mechanical energy sources)	-	0	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	0	-
Cl-8.5(Safeguards against moving parts)	-	0	-
Cl-8.6(Stability of equipment)	-	0	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	0	-
Cl-8.8(Handle strength)	-	0	-
Cl-8.9(Wheels or casters attachment requirements)	-	0	-
Cl-8.10(Carts, stands, and similar carriers)	-	0	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	0	-
Cl-9.1(General-Thermal burn injury)	-	0	-
Cl-9.2(Thermal energy source classifications)	-	0	-
Cl-9.3(Touch temperature limits)	-	0	-
Cl-9.4(Safeguards against thermal energy sources)	-	0	-
Cl-9.5(Requirements for safeguards)	-	0	-
Cl-9.6(Requirements for wireless power transmitters)	-	0	-
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex B-2(Normal operating conditions)	-	0	-
Annex B-3(Simulated abnormal operating conditions)	-	0	-
Annex B-4(Simulated single fault conditions)	-	0	-
Annex D-1(Impulse test generators)	-	0	-
Annex D-2(Antenna interface test generator)	-	0	-
Annex E-1(Electrical energy source classification for audio signals)	-	0	-
Annex E-2(Audio signals used during test)	-	0	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	0	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex F-2(Letter symbols and graphical symbols)	-	0	-
Annex F-3(Equipment markings)	-	0	-
Annex F-4(Instructions)	-	0	-
Annex F-5(Instructional safeguards)	-	0	-
Annex G-4(Connectors)	-	0	-
Annex G-5(Wound components)	-	0	-
Annex G-6(Wire insulation)	-	0	-
Annex G-7(Mains power supply cords and interconnection cables)	-	0	-
Annex G-9(Integrated circuit (IC) current limiters)	-	0	-
Annex G-10(Resistors)	-	0	-
Annex G-13(Printed boards)	-	0	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	0	-
Annex H-1(General- Criteria for telephone ringing signals)	-	0	-
Annex H-2(Method A)	-	0	-
Annex H-3(Method B)	-	0	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	0	-
Annex L-1(General requirements)	-	0	-
Annex L-2(Permanently connected equipment)	-	0	-
Annex L-3()	-	0	-
Annex L-4(Single-phase equipment)	-	0	-
Annex L-5(Three-phase equipment)	-	0	-
Annex L-6(Switches as disconnect devices)	-	0	-
Annex L-7(Plugs as disconnect devices)	-	0	-
Annex L-8(Multiple power sources)	-	0	-
Annex L-9(Compliance criteria)	-	0	-
Annex M-1(General requirements)	-	0	-
Annex M-2(Safety of batteries and their cells)	-	0	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	0	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	0	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	0	-
Annex M-6(Safeguards against short-circuits)	-	0	-
Annex M-9(Preventing electrolyte spillage)	-	0	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	0	-
Annex N(Electrochemical potentials (V))	-	0	-
Annex O(Measurement of creepage distances and clearances)	-	0	-
Annex P-1(General-Safeguards against conductive objects)	-	0	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	0	-
Annex P-3(Safeguards against spillage of internal liquids)	-	0	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	0	-
Annex Q-1(Limited power source)	-	0	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	0	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	0	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	0	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	0	-
Annex S-4(Flammability classification of materials)	-	0	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	0	-
Annex T-1(General-Mechanical strength tests)	-	0	-
Annex T-2(Steady force test, 10 N)	-	0	-
Annex T-3(Steady force test, 30 N)	-	0	-
Annex T-4(Steady force test, 100 N)	-	0	-
Annex T-5(Steady force test, 250 N)	-	0	-
Annex T-6(Enclosure impact test)	-	0	-
Annex T-7(Drop test)	-	0	-
Annex T-8(Stress relief test)	-	0	-
Annex T-9(Glass impact test)	-	0	-
Annex T-10(Glass fragmentation test)	-	0	-
Annex T-11(Test for telescoping or rod antennas)	-	0	-
Annex V-1(Accessible parts of equipment)	-	0	-
Annex V-2(Accessible part criterion)	-	0	-
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	0	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	0	-
Annex K-1(General- Safety interlocks)	-	0	-
Annex Y-3(Resistance to corrosion)	-	0	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	0	-
Annex Y-6(Mechanical strength of enclosures)	-	0	-
Cl-4.1(General- materials, components)	-	0	-

07 Jan, 2027

-
Included w.e.f 03.08.2026 Exclusions: Cl-5.4 (Insulation materials and requirements), Cl-7.3 (Ozone exposure), Cl-8.5.5, Annex G-8 (Varistors), Annex G-11 (Capacitors and RC units), Annex G-12 (Optocouplers), Annex G-15 (Pressurized liquid filled components or LFC assemblies), Cl-10.1 (General-Radiation), Cl-10.2 (Radiation energy source classifications), Cl-10.3 (Safeguards against laser radiation), Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)""), Cl-10.5 (Safeguards against X-radiation), Cl-10.6 (Safeguards against acoustic energy sources), Annex R (Limited short-circuit test), Annex U (""Mechanical strength of CRTs and protection against the effects of implosion""), Annex C-1 (Protection of materials in equipment from UV radiation), Annex C-2 (UV light conditioning test), Annex D-3 (Electronic pulse generator), Annex G-1 (Switches), Annex G-2 (Relays), Annex G-3 (Protective devices), Annex G-14 (Coatings on component terminals), Annex J-1 (General-Insulated winding wires for use without interleaved insulation), Annex J-2 (Type tests), Annex J-3 (Testing during manufacturing), Annex K-2 (Components of the safety interlock safeguard mechanism), Annex K-3 (Inadvertent change of operating mode), Annex K-4 (Interlock safeguard override), Annex K-5 (Fail-safe), Annex K-6 (Mechanically operated safety interlocks), Annex K-7 (Interlock circuit isolation), Annex M-7 (Risk of explosion from lead acid and NiCd batteries), Annex M-8 (""Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte""), Annex S-5 (Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W), Annex Y-2 (Resistance to UV radiation), Annex Y-4 (Gaskets)

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

535000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.7.1(Specific gravity)	-	24300	-
Cl-4.1(Photovoltaic Energy System)	-	24300	-
Cl-4.2(Secondary Cells and Batteries)	-	24300	-
Cl-4.3(General Operating Conditions)	-	24300	-
Cl-4.3.8(Storage)	-	24300	-
Cl-4.3.9(Operating Temperature)	-	24300	-
Cl-5.1(Mechanical Endurance)	-	24300	-
Cl-5.2(Charge Efficiency)	-	24300	-
Cl-5.3(Deep Discharge Protection)	-	24300	-
Cl-5.4(Marking)	-	24300	-
Cl-5.5(Safety)	-	24300	-
Cl-5.6(Documentation)	-	24300	-
Cl-6(Functional characteristice)	-	24300	-
Cl-7(General test conditions)	-	24300	-
Cl-8.1(Capacity Test)	-	24300	-
Cl-8.2(Endurance Test)	-	24300	-
Cl-8.3(Charge Retention Test)	-	24300	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	24300	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	24300	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	24300	-
Cl-9.1(Type Tests)	-	24300	-
Cl-9.2(Acceptance Test)	-	24700	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-

07 Jan, 2027

-
Included w.e.f. 12.11.2025

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Plasma /LCD/LED TV of screen sizes upto 150 inches

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	0	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	11000	-
8(Constructional requirements with regard to the protection against electric shock)	-	10000	-
9(Electric shock hazard under normal operating conditions)	-	9000	-
10(Insulation requirements)	-	15000	-
11(Fault conditions)	-	0	-
12(Mechanical strength)	-	12000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
14(Components)	-	0	-
15(TERMINALS)	-	0	-
16(External flexible cords)	-	0	-
17(Electrical connections and mechanical fixings)	-	0	-
19(Stability and mechanical hazards)	-	0	-
20(Resistance to fire)	-	0	-

07 Jan, 2027

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	500	OK
7(Marking and instructions)	-	500	OK
8.1.1(Protection against live parts in all positions)	-	500	OK
8.1.2(Protection against live parts in openings)	-	500	OK
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	OK
8.1.4(Protection against live parts against protective impedance)	-	500	OK
9(Starting of motor operation test requirements and tests)	-	2000	OK
10.1(Power input)	-	2500	OK
10.2(Current input)	-	2000	OK
11.3(Heating)	-	4000	OK
13.2(Leakage current at operating temperature)	-	1500	OK
13.3(Electric Strength at operating temperature)	-	500	OK
14(Transient Over Voltages)	-	500	OK
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	OK
15.2(Spillage Test)	-	500	OK
15.3(Humidity Test)	-	1000	OK
16.2(Leakage Current (after Clause 15))	-	5500	OK
16.3(Electric Strength (after clause 15 and 16.2))	-	500	OK
17(Over Load Protection of Transformers and associated circuits)	-	500	OK
19(Abnormal Operation)	-	500	OK
20(Stability test)	-	500	OK
21(Mechanical Strength Test)	-	500	OK
22(Construction verification related test)	-	500	OK
23(General)	-	500	OK
25(Supply connection and external flexible cords)	-	500	OK
26(Terminals for external conductors)	-	500	OK
27(Provision for earthing)	-	500	OK
28(Screw test and connections)	-	500	OK
29(clearance, creepage distances and solid insulation)	-	500	OK
30.1(Ball pressure test)	-	500	OK
30.2(Glow Wire Test)	-	500	OK
31(Resistance to Rusting)	-	500	OK
11.1(General)	-	500	OK
11.2(General)	-	500	OK
11.4(Heating appliances)	-	1000	OK
11.5(Motor-operated appliances)	-	500	OK
11.6(Combined appliances)	-	500	OK
11.7(Duration corresponding)	-	500	OK
11.8(Temperature rise)	-	1000	OK

07 Jan, 2027

-
32 (Radiation Toxicity and Similar Hazards) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	8000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	2000	-
5.1(Inputting of text)	-	8000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	2000	-

07 Jan, 2027

-
-

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.3(Thermal testing)	-	4000	-
Clause No. 4.4(Testing in single fault condition)	-	4000	-
4.5(Humidity preconditioning)	-	4000	-
4.6(Backfeed voltage protection)	-	4000	-
4.7(Electrical rating tests)	-	4000	-
4.8(Additional tests for grid interactive inverters)	-	4000	-
4(General Test Requirements)	-	4000	-
5(Marking and documentation)	-	4000	-
6(Environmental requirements and conditions)	-	4000	-
7(Protection against electric shock and energy hazards)	-	4000	-
8(Protection against Mechanical Hazards)	-	4000	-
9(Protection against Fire Hazards)	-	4000	-
10(Protection against Sonic Pressure Hazards)	-	4000	-
11(Protection against Liquid Hazards)	-	4000	-
12(Protection against Chemical Hazards)	-	4000	-
13(Physical Requirements)	-	4000	-
14(Components)	-	4000	-
4.4.4.15.1(Fault-tolerance of residual current monitoring)	-	4000	-
4.4.4.15.2(Fault-tolerance of automatic disconnecting means)	-	4000	-
4.4.4.16(Stand-alone inverters – Load transfer test)	-	4000	-
4.4.4.17(Cooling system failure – Blanketing test)	-	4000	-
4.7.3(Measurement requirements for AC output ports for stand-alone inverters)	-	4000	-
4.7.4(Stand-alone Inverter AC output voltage and frequency)	-	4000	-
4.7.4.2(Steady state output voltage at nominal DC input)	-	4000	-
4.7.4.3(Steady state output voltage across the DC input range)	-	4000	-
4.7.4.4(Load step response of the output voltage at nominal DC input)	-	4000	-
4.7.4.5(Steady state output frequency)	-	4000	-
4.7.5(Stand-alone inverter output voltage waveform)	-	4000	-
4.7.5.2(Sinusoidal output voltage waveform requirements)	-	4000	-
4.7.5.3(Non-sinusoidal output waveform requirements)	-	4000	-
4.7.5.5(Output voltage waveform requirements for inverters for dedicated loads)	-	3000	-
4.8.2.1(Array insulation resistance detection for inverters for ungrounded arrays)	-	3000	-
4.8.2.2(Array insulation resistance detection for inverters for functionally grounded arrays)	-	3000	-
4.8.3.2(30 mA touch current type test for isolated inverters)	-	3000	-
4,8.3.3(Fire hazard residual current type test for isolated inverters)	-	3000	-
4.8.3.5(Protection by residual current monitoring)	-	3000	-
7.3.10(Additional requirements for stand-alone inverters)	-	3000	-
9.3.4(Inverter backfeed current onto the array)	-	3000	-
13.9(Fault indication)	-	3000	-
9.1.4.3(Hot flaming oil test)	-	3000	-

07 Jan, 2027

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	3000	-
5(Classification of Luminaires')	-	1500	-
6.0(Marking)	-	1500	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	3000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	1000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	1000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	1000	-
14.0(Resistance to Dust & Moisture)	-	1000	-
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	1000	-
4(General Test Requireements)	-	-	-
5(Classification of Luminaires')	-	-	-
6.0(Marking)	-	-	-
7.0(Construction)	-	-	-
8.0(Creepage Distance and Clearances)	-	-	-
9.0(Provision for earthing)	-	-	-
10.0(Terminals)	-	-	-
11.0(External & Internal Wiring)	-	-	-
12.0(Protection against electric shock)	-	-	-
13.0(Endurance Tests and Thermal Tests)	-	-	-
14.0(Resistance to Dust & Moisture)	-	-	-
15.0(Insulation Resistance and Electric Strength)	-	-	-
16.0(Resistance to Heat , fire and tracking)	-	-	-

07 Jan, 2027

-
-

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

390000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Thermal testing)	-	4000	-
4.3, 4.3.2, 4.3.2.2, 4.3.2.3(Thermal Tests (Maximum temperatures, Touch temperature, temperature limits for mount surfaces))	-	4000	-
4.4.3.1(Protection against shock hazard)	-	4000	-
6.3(Ingress protection)	-	4000	-
7.3.2.3(Short-term limits of accessible voltages under fault conditions)	-	4000	-
7.3.2.6(Working voltage and DVC)	-	4000	-
7.3.4,7.3.4.2(protection against direct contact)	-	4000	-
7.3.4.3(Protection by means of insulation of live parts)	-	4000	-
7.3.5,7.3.5.2(Protection in case of direct contact)	-	4000	-
7.3.5.3.1(Limitation of current through protective impedance)	-	4000	-
7.3.5.3.2(Limitation of discharging energy through protective impedance)	-	4000	-
7.3.5.4(Protection by means of limited voltages)	-	4000	-
7.3.6.1,7.3.6.2(Protection against indirect contact(Creapage & clearance))	-	4000	-
7.3.6.3(Protective class I - Protective bonding and earthing)	-	4000	-
7.3.6.3.3(Rating of protective bonding)	-	4000	-
7.3.7.4(Clearance distances)	-	4000	-
7.3.7.5(Creepage distances)	-	4000	-
7.3.7.8.4.2(Use of coating materials (on PWBs))	-	4000	-
7.3.8(Residual current detection (RCD) or Monitoring (RCM) device compatibilty (DC components on AC side))	-	4000	-
7.3.9(Protection against shock hazard due to stored energy)	-	4000	-
7.4(Protection against energy hazards)	-	4000	-
7.5.1(Impulse voltage test (type test))	-	4000	-
7.5.2(Voltage test (dielectric strength test))	-	4000	-
7.5.2.3(Humidity preconditioning)	-	4000	-
7.5.3(Partial discharge test (type test or sample test))	-	4000	-
7.5.4(Touch current measurement)	-	4000	-
8.2(Moving parts)	-	4000	-
8.3(Stability)	-	4000	-
8.4(Provisions for lifting and carrying)	-	4000	-
8.5(Wall mounting)	-	4000	-
8.6(Expelled parts)	-	4000	-
10.2(Sonic pressure and sound level)	-	5000	-
11.1(Liquid containment, pressure and leakage)	-	5000	-
11.2(Fluid pressure and leakage)	-	5000	-
12(Chemical hazards)	-	5000	-
13.1(Handles and manual controls)	-	5000	-
13.1.1(Adjustable controls)	-	5000	-
13.2(Securing of parts)	-	5000	-
13.3(Provisions for external connections)	-	5000	-
13.3.2.5(Cord anchorages and strain relief)	-	5000	-
13.3.5(Wire bending space for wires 10mm2 and greater)	-	5000	-
13.4(Internal wiring and connections)	-	5000	-
13.6.2.1(Stress relief test)	-	5000	-
4.4.3.2(Protection against spread of fire)	-	5000	-
4.4.3.4(Protection Against parts expulsion hazards)	-	5000	-
4.4.4.1(Component fault tests)	-	5000	-
4.4.4.2(Equipment’s or parts for short-term or intermittent operation)	-	5000	-
4.4.4.3(Motors(Lock rotor))	-	5000	-
4.4.4.4(Transformer short circuit tests)	-	5000	-
4.4.4.5(Output short circuit)	-	5000	-
4.4.4.6(Backfeed current test for equipment with more than one source of supply)	-	5000	-
4.4.4.7(Output overload)	-	5000	-
4.4.4.8(Cooling system failure)	-	5000	-
4.4.4.9(Heating devices)	-	5000	-
4.4.4.10(Safety interlock systems)	-	5000	-
4.4.4.11(Reverse d.c. connections)	-	5000	-
4.4.4.12(Voltage selector mismatch)	-	5000	-
4.4.4.13(Mis-wiring with incorrect phase sequence or polarity)	-	5000	-
4.4.4.14(Printed wiring board short-circuit test)	-	5000	-
4.5(Humidity preconditioning)	-	5000	-
4.6.1(Backfeed tests under normal conditions)	-	5000	-
4.6.2(Backfeed tests under single-fault conditions)	-	5000	-
4.7(Electrical rating tests)	-	5000	-
5.1.2(Durability of markings)	-	5000	-
5.2.1(Visibility and legibility requirements for warning markings)	-	5000	-
9.1.1(Reducing the risk of ignition and spread of flame)	-	5000	-
9.1.2(Conditions for a fire enclosure)	-	5000	-
9.1.3(Material requirements for protection against fire hazard)	-	5000	-
9.1.4(Openings in fire enclosures)	-	5000	-
9.1.4.3(Hot flaming oil test)	-	5000	-
9.1.4.6(Additional requirements for openings in transportable equipment)	-	5000	-
9.2.2(Limited power source tests)	-	5000	-
9.3(Short-circuit and overcurrent protection)	-	5000	-
13.7(Mechanical resistance to deflection, impact, or drop)	-	5000	-
13.8(Thickness requirements for metal enclosures)	-	5000	-
4(General testing requirements)	-	5000	-
5(Marking and documentation)	-	5000	-
6(Environmental Requirements and conditions)	-	5000	-
7(Protection against electric shock and energy hazards)	-	5000	-
8(Protection Against mechanical Hazards)	-	5000	-
9(Protection Against Fire Hazards)	-	5000	-
10(Protection against Sonic Pressure hazards)	-	5000	-
11(Protection against liquid hazards)	-	5000	-
13(Physical requirements)	-	5000	-
Annex A(Measurement of clearances and creepage distances)	-	500	-
Annex B(Programmable equipment)	-	500	-
Annex C(Symbols to be used in equipment markings)	-	500	-
Annex D(Test probes for determining access)	-	500	-
Annex E(RCDs)	-	500	-
Annex F(Altitude correction for clearances)	-	500	-
Annex G(Clearance and creepage distance determination for frequencies greater than 30 kHz)	-	500	-
Annex H("Measuring instrument for touch current measurements ")	-	500	-
Annex I("Examples of protection, insulation, and overvoltage category requirements for PCE ")	-	500	-
14(Components)	-	3500	-

07 Jan, 2027

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

50000 View breakup
(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	0	-
7.0(Construction)	-	5000	-
8.0(Creepage Distance and Clearances)	-	5000	-
9.0(Provision for earthing)	-	5000	-
10.0(Terminals)	-	5000	-
11.0(External & Internal Wiring)	-	5000	-
12.0(Protection against electric shock)	-	5000	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-

07 Jan, 2027

-
Photometry test (Cl.1.7)

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

45000 View breakup
(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6(Marking)	-	0	-
7(Construction)	-	4500	-
8(Creepage Distance and Clearances)	-	4500	-
9(Provision for earthing)	-	4500	-
10(Terminals)	-	4500	-
11(External & Internal Wiring)	-	4500	-
12(Protection against electric shock)	-	4500	-
13(Endurance Tests and Thermal Tests)	-	4500	-
14(Resistance to Dust and Moisture)	-	4500	-
15(Insulation Resistance and Electric Strength)	-	4500	-
16(Resistance to Heat , fire and tracking)	-	4500	-

07 Jan, 2027

-
Photometry test (Cl.1.7)

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Storage Batteries

625500 View breakup
For Stationary Lead acid cell/battery (with tubular positive plates) in monobloc containers), Rs.6,25,500/- For Stationary acid cell and batteries (with tubular positive plates), Rs.6,25,500/- For Stationary Valve regulated lead acid batteries). (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	5500	-
5.1(Mechanical Endurance)	-	15000	-
5.2(Charge efficiency)	-	10000	-
5.3(Deep discharge protection)	-	10000	-
5.4(Marking)	-	10000	-
5.5(Dafety)	-	10000	-
5.6(Documentation)	-	10000	-
6(Finctional Characteristics)	-	10000	-
7(General test conditions)	-	10000	-
8.1(Capacity test)	-	40000	-
8.2(Endurance test)	-	160000	-
8.3(Charge retention test)	-	40000	-
8.4(Cycle endurance in Photovoltaic application)	-	150000	-
8.5(Sulphation Test)	-	80000	-
8.6(Water loss test)	-	50000	-
8.7(Non spillability)	-	15000	-

07 Jan, 2027

-
• Capacity restricted to Batteries up to 160Ah, 15V (i) Stationary cells & Batteries, Lead acid type (with tubular positive plates) (ii) Stationary valve regulated lead acid batteries.

IS 16046 : Part 1 (2018)

Nickel System Cells And Batteries

132000 View breakup
or Nickel system cells, Rs.40,000/- for Nickel system batteries. (10% Discount for BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	2000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	10000	-
7.2(Intended Use)	-	31000	-
7.3(Reasonably foreseeable misuse)	-	24000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

07 Jan, 2027

-
Capacity restricted up to 17.5Ah, 50V. Included w.e.f. 26-10-2021.

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

INFORMATION TECHNOLOGY EQUIPMENT — SAFETY PART 1

70000 View breakup
for Set Top Box, Telephone answering machines, Wireless Keyboard, Passport Reader, Point of sale terminal, Power bank for use in portable applications, Smart card reader, Mobile phones, USB driven Barcode readers, Barcode scanners, iris scanners, Optical Fingerprint Scanners, Smart watches, Keyboard, USB Type External Hard Disk Drive, USB type External Solid State Storage Devices (above 256 GB Capacity), Digital Camera. Rs.35,000/- for Laptop/ Notebook/ Tablet, Cash Registers, Mail processing machine/ postage machine/ Franking machine, Power adaptor for IT equipments, CCTV Camera/ CCTV Recorders, Automatic Teller Cash Dispensing Machines Rs.40,000/- for Printer, Plotter, Scanner (Industrial & Non industrial), Visual display unit, videos monitors of screen size above 32”, Copying machine/ duplicator, Visual display unit, videos monitors of screen size up to 32”, Standalone Switch Mode Power supplies (SMPS) with output Voltage 48 V (max.) Rs.50,000/- for Automatic Data Processing Machine.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Abnormal operating and fault conditions)	-	5000	-
4.5(Thermal requirements)	-	2000	-
1.6(Power interface .)	-	3000	-
2.2(SELV circuits)	-	2000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.3(TNV circuits)	-	2000	-
2.5(Limited power sources .)	-	2000	-
2.6(Provisions for earthing and bonding)	-	2000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	-
2.8(Safety interlocks)	-	2000	-
2.9(Electrical insulation)	-	2000	-
2.10(Clearances, creepage distances and distances through insulation)	-	4000	-
3.1(General)	-	0	-
3.2(Connection to a mains supply)	-	2000	-
3.3(Wiring terminals for connection of external conductors)	-	2000	-
3.4(Disconnection from the mains supply)	-	2000	-
3.5(Interconnection of equipment)	-	2000	-
4.1(Stability)	-	2000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.6(Openings in enclosures)	-	3000	-
4.7(Resistance to fire)	-	2000	-
5.1(Touch current and protective conductor curren)	-	2000	-
5.2(Electric strength)	-	3000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	0	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	-
1.5(Components)	-	0	-
2.4(Limited current circuits)	-	2000	-
2.8.2/2.8.5(Interlock switches)	-	0	-
2.8.7(Switches and Relay)	-	0	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.4(Opto-coupler)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.2.8(Cathode Ray Tubes)	-	0	-
4.3.8(Batteries)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
4.3.12(Flammable liquids)	-	0	-
Annex A3(Hot flaming oil test)	-	0	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	0	-
Annex K(Thermal Control)	-	0	-
Annex Q(Voltage Dependent Resistors)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	0	-
Annex EE(Household and home/ office document/ media shredders)	-	0	-

07 Jan, 2027

-
Components (Cl.1.5), Ionizing radiation (Cl.4.3.13), Insulated winding wires for use without interleaved insulation (Annex U). Included w.e.f. 26-10-2021.

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES

30000 View breakup
(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	0	-
6(Interchangeability)	-	2500	-
7(Protection against accidental contact with live parts)	-	4500	-
8(Insulation Resistance and Electric Strength)	-	2500	-
9(MECHANICAL STRENGTH)	-	3000	-
10(cap temperature)	-	4000	-
11(Resistance to Heat)	-	4000	-
12(Resistance to Flame and Ignition)	-	4000	-
13(Fault conditions)	-	4500	-
14(Creepage distance and clearances)	-	1000	-

07 Jan, 2027

-
-

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION

1000000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	18518	-
10.2(Accessibility test (MST 11))	-	18518	-
10.3(Cut susceptibility test (MST 12))	-	18518	-
10.4(Ground Continuity Test (MST 13))	-	18518	-
10.5(Impulse voltage test (MST 14))	-	18518	-
10.6(Dielectric withstand test (MST 16))	-	18518	-
10.7(Temperature test (MST 21))	-	18518	-
10.8(Fire test (MST 23))	-	18518	-
10.9(Reverse Current overload test (MST 26))	-	18518	-
10.10(Module breakage test (MST 32))	-	18518	-
11.1(Partial discharge-test (MST 15))	-	18518	-
11.2(Conduit Bending test (MST 33))	-	18518	-
11.3(Terminal box knockout tests (MST 44))	-	18518	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	18518	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	18518	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	18518	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	18518	-
Cl.5, Table 7(UV resistance (MST 54))	-	18518	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	18518	-
Cl.5, Table 7(Robustness of termination test (MST 42))	-	18518	-
Cl.5, Table 7(Hot spot test (MST 22))	-	18518	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	18518	-
10.33 IS/IEC 61730-2(Dry heat conditioning MST 56)	-	18518	-
10.32 IS/IEC 61730-2(Cold conditioning MST 55)	-	18518	-
10.31 IS/IEC 61730-2(UV test MST 54)	-	18518	-
10.30 IS/IEC 61730-2(Damp heat test MST 53)	-	18518	-
10.29 IS/IEC 61730-2(Humidity-freeze test MST 52)	-	18518	-
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	18518	-
10.27 IS/IEC 61730-2(Robutness of terminations test MST 42)	-	18518	-
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	18518	-
10.25 IS/IEC 61730-2(Lap shear strength test MST 36)	-	18518	-
10.24 IS/IEC 61730-2(Peel test MST 35)	-	18518	-
10.23 IS/IEC 61730-2(Static Mechanical load test MST 34)	-	18518	-
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	18518	-
10.21 IS/IEC 61730-2(Module breakage test MST 32)	-	18518	-
10.20 IS/IEC 61730-2(Reverse current overload test MST 25)	-	18518	-
10.19 IS/IEC 61730-2(Bypass diode thermal test MST 25)	-	18518	-
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	18518	-
10.17 IS/IEC 61730-2(Fire test MST 23)	-	18518	-
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	18518	-
10.15 IS/IEC 61730-2(Temperature test MST 21)	-	18518	-
10.14 IS/IEC 61730-2(Wet leakage current test MST 17)	-	18518	-
10.13 IS/IEC 61730-2(Insulation test MST 16)	-	18518	-
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	18518	-
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	18518	-
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	18518	-
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	18518	-
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	18518	-
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	18518	-
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	18518	-
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	18518	-
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	18518	-
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	18518	-
10.2 IS/IEC 61730-2(Visual inspection MST01)	-	18546	-

07 Jan, 2027

-
-

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	20000	-
4(Construction requirements)	-	20000	-
5(Polymeric materials)	-	20000	-
6(Internal wiring and current-carrying parts)	-	20000	-
7(Connections)	-	20000	-
8(Bonding and grounding)	-	20000	-
9(Creepage and clearance distances)	-	20000	-
10(Field wiring compartments with covers)	-	20000	-
11(Marking)	-	20000	-
12()	-	20000	-

07 Jan, 2027

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

SAFETY OF LAMP CONTROLGEAR

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1500.02	ok
8(Protection against accidental contact with live parts)	-	2666.66	ok
9(Terminals)	-	3166.66	ok
10(PROVISION FOR EARTHING)	-	1500	ok
11(MOISTURE RESISTANCE)	-	2500	ok
12(Electric Strength)	-	2500	ok
13(Thermal endurance test for winding of ballasts)	-	1000	ok
14(Fault conditions)	-	1000	ok
15(Transformer heating)	-	2500	ok
16(Construction)	-	3166.66	ok
17(Creepage distance and clearances)	-	1000	ok
18(Screws, current carrying parts and connections)	-	1500	ok
19(Resistance to heat, fire and tracking)	-	4000	ok
20(Resistance to corrosion)	-	2000	ok

07 Jan, 2027

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

Uninterruptible Power Systems (UPS)

50000 View breakup
Upto 10 KVA (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	0	-
4.6(Power interface)	-	3000	-
4.7(Marking & instructions)	-	1000	-
5.1(Protection against shock and energy hazards)	-	1500	-
5.2(Requirement of auxiliary circuits)	-	1000	-
5.3(Protective earthing and bonding)	-	1500	-
5.4(AC and DC power isolation)	-	2000	-
5.5(Over current and earth fault condition)	-	2000	-
5.6(Safety interlocks)	-	5000	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
6.1(Wiring, connections and supply)	-	1000	-
6.2(Connection to power)	-	2000	-
6.3(Wiring terminals for external power conductors)	-	2000	-
7.1(Enclosure)	-	2000	-
7.2(STABILITY)	-	2500	-
7.3(MECHANICAL STRENGTH)	-	2000	-
7.4(Construction details)	-	2000	-
7.5(Resistance to fire)	-	3000	-
7.6(Battery location)	-	1500	-
7.7(Temperature rise)	-	3000	-
8.1(General procision for earth leakage)	-	2000	-
8.2(Electric Strength)	-	2000	-
8.3(Abnormal operating and fault conditions)	-	2000	-
9.0(Connection to telecommunication networks)	-	2000	-
4.3.8(Batteries)	-	2000	-

07 Jan, 2027

-
• Exclusion: Components (Cl.1.5), SMPS?Mains Transformer (Cl.2.10.5.11), PCB Material (Cl.2.10.6), Non rewireble plug with PVC sheathed cable (Cl.3.2.5), Appliance inlet/connector (Cl.3.2.4), Internal wire (Cl.3.1.4), Semi-conductor devices (Cl.2.10.5.4), Switches & Relays (Cl.2.8.2, 2.8.5, 2.8.7), Winding wires (Cl.2.10.5.3), Batteries (cl.4.3.8)

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

740000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	39333.33	-
10.1(Visual inspection)	-	39333.33	-
10.2(Maximum power determination)	-	39333.33	-
10.3(Insulation test)	-	39333.33	-
10.4(Measurement of temperature coefficients)	-	39333.33	-
10.5(Measurement of NOCT)	-	39333.33	-
10.6(Performance at STC and NOCT)	-	39333.33	-
10.7(Performance at low irradiance)	-	39333.33	-
10.8(Outdoor exposure test)	-	39333.33	-
10.9(Hot-spot endurance test)	-	39333.33	-
10.10(UV preconditioning)	-	39333.33	-
10.11(Thermal cycling test)	-	36888.90	-
10.12(Humidity freeze test)	-	36888.90	-
10.13(Damp heat test)	-	36888.92	-
10.14(Robustness of termination test)	-	39333.33	-
10.15(Wet leakage current test)	-	39333.33	-
10.16(Mechanical load test)	-	39333.33	-
10.17(Hail test)	-	39333.33	-
10.18(Bypass diode thermal' test)	-	39333.33	-

07 Jan, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

ACE TEST LAB PRIVATE LIMITED (8166826), DELHI

Industrial Plot No 69 , Khasra No.54 , Street No. 02 , G.T.K. Road Nangli Poona, New Delhi, North West, Delhi, 110036

7879793911 info@acetestlab.com

Scope List