BIS - LIMS (Laboratory Information Management System)

NSIC - Technical Services Centre

Aji Industrial, Bhavnagar Road, Opp Gujarat Forging, Rajkot, Rajkot, Gujarat, 360003

9982177100 ntscraj@nsic.co.in

Scope List

Reset

35 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 11170 (1985)

Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW)

105600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	100	For Type Test up to 20kW
8(Test Certificate)	-	2500	-
3.1(a) Preparation for tests according to IS : 10000 (Part 5)-1980)	-	2500	-
3.1(b) Preliminary run according to IS : 10000 (Part 5)-1980)	-	2500	-
3.1(c) Initial performance test according to Section I of IS : 10000 (Part 8)-1980 )	-	2500	-
3.1(d) Endurance test according to Section 1 of IS : 10000 (Part 9)-1980 )	-	86000	-
3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;)	-	3000	-
3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 )	-	3000	-
3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.)	-	3000	-
3.1(Type test)	-	5000	-
3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;)	-	3000	-
3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 )	-	3000	-
3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.)	-	3000	-
7(Marking)	-	100	-
8(Test Certificate)	-	500	-
3.1(Type test)	-	5000	-
3.1(a) Preparation for tests according to IS : 10000 (Part 5)-1980)	-	1000	-
3.1(b) Preliminary run according to IS : 10000 (Part 5)-1980)	-	250	-
3.1(c) Initial performance test according to Section I of IS : 10000 (Part 8)-1980 )	-	250	-
3.1(d) Endurance test according to Section 1 of IS : 10000 (Part 9)-1980 )	-	250	-
3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;)	-	250	-
3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 )	-	250	-
3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.)	-	500	-
15.4 (b)(Cold impact)	-	500	-
9.1(PIPE ENDS)	-	500	-

Complete

IS 10805 (1986)

Specification for foot - Valves, reflux valves or non - Return valves and bore valves to be used in suction lines of agricultural pumping systems (First Revision)

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 2 Table 1)(Nominal Size)	-	500	-
(Cl. 2 Table 1)(Dimensions)	-	500	-
(Cl. 2 Table 1)(Dimensions)	-	500	-
(Cl. 2 Table 1)(Dimensions)	-	500	-
(Cl. 4)(Requirements)	-	500	-
(Cl. 4)(Requirements)	-	500	-
(Cl. 5)(Coating)	-	300	-
6.1.1(Seat test)	-	1000	-
6.1.2(Housing test)	-	1000	-
6.2(K-Value Test for Foot-Valves and Bore Valves)	-	1000	-
15.4 (b)(Cold impact)	-	100	-
9.1(PIPE ENDS)	-	100	-

Complete

IS 11501 (1986)

Specification for engine monoset pumps for clear, cold, fresh water for agricultural purposes

22680 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Material of Construction)	-	100	-
5.1(Gaskets, Seals and Packings)	-	100	-
6.1(Direction of rotation)	-	100	-
6.1(Direction of rotation)	-	100	-
7(Suction Limitations)	-	100	-
9.1(Design Features)	-	100	-
9.1(Design Features)	-	100	-
10.2(Casing)	-	1000	-
10.3(Impeller)	-	1000	-
10.4(Shaft)	-	1000	-
11.1(Engine Testing)	-	1000	-
11.2(Engine Testing)	-	1000	-
11.3.2.1(Pump Testing)	-	1000	-
11.3.2.2(Diesel Consumption)	-	1000	-
11.3.2.3(Pump Testing)	-	1000	-
11.4.2.1(Pump Testing)	-	1000	-
11.4.2.1(Pump Testing)	-	1000	-
11.4.2.2(Pump Testing)	-	1000	-
11.4.2.5(Pump Testing)	-	1000	-
14(MARKING)	-	1000	-
14(MARKING)	-	1000	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
14(MARKING)	-	100	-
15.4 (b)(Cold impact)	-	100	-
9.1(PIPE ENDS)	-	100	-

Complete

IS 1710 (1989)

Specification for pumps - Vertical turbine mixed and axial flow, for clear cold water (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 10.1(Max. Power at operating Head Range)	-	1000	-
Cl. 16.2(Guarntee of Performance (Pump Efficiency))	-	1000	-
Cl. 16.2(Guarntee of Performance (Power))	-	1000	-
Cl. 16.2(Guarntee of Performance (Discharge))	-	1000	-
Cl. 16.2(Guarntee of Performance (Head))	-	1000	-
Cl. 14.1(Pump Performance Test)	-	1000	-
Cl. 10.1(Design of Pump)	-	1000	-
Cl. 9.2.5.3(Line Shaft)	-	100	-
Cl. 9.2.3.3(Discharge case)	-	100	-
Cl. 9.2.3.2(Bowl)	-	100	-
Cl. 9.2.3.1(Bowl)	-	100	-
Cl. 9.2.2(Impeller)	-	100	-
Cl. 9.1.5.4(Thrust Bearing)	-	100	-
Cl. 9.1.5.3(Operating Speed)	-	100	-
Cl. 9.1.5.2(Engine Driven)	-	100	-
Cl. 9.1.5.1(Motor Driven)	-	100	-
Cl. 9.1.4(Submergence Required)	-	100	-
Cl. 9.1.2(Specification of Pump)	-	100	-
Cl. 8.2(Direction of Rotation)	-	100	-
Cl. 8.1(Direction of Rotation)	-	100	-
Cl. 9.2.4 (f)(speed)	-	100	-
Cl. 9.2.4 (e)(Head in meters/kW rating)	-	100	-
Cl. 9.2.4 (d)(Type of Impeller)	-	100	-
Cl. 9.2.4 (c)(Type)	-	100	-
Cl. 9.2.4 (b)(Serial number/year of manufacture)	-	100	-
Cl. 9.2.4 (a)(Name of Manufacturers)	-	100	-

Complete

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	295	Include GST
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	295	Include GST
7.2(Reversion Test)	-	708	Include GST
7.3(Tensile Test)	-	1121	Include GST
7.3(Elongation at Break)	-	1121	Include GST
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1062	Include GST
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	944	Include GST
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	590	Include GST
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	800	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	2000	-

Complete

Bureau of Indian Standards

The National Standards Body of India

NSIC - Technical Services Centre

Aji Industrial, Bhavnagar Road, Opp Gujarat Forging, Rajkot, Rajkot, Gujarat, 360003

9982177100 ntscraj@nsic.co.in

Scope List