BIS - LIMS (Laboratory Information Management System)

CIPET, Hajipur

INDUSTRIAL AREA, Hajipur, Vaishali, Bihar, 844102

7781020335 testing-hajipur@cipet.gov.in

Scope List

Reset

39 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

38725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	6750.0	Density : 1000 (5002) Melt Flow Rate: 2200 (11002) Carbon Black Content: 1850 (9252) Carbon Black Dispersion:1400 (7002) Workmanship & Appearance: 300
6.1.3.2 (Quick coupled fittings)	-	0.0	-
6.1.3.1.1(Weldability Test)	-	6400.0	Acceptance Test: 1600 Quality Test: 4800
6.1.3, 6.1.3.1(Weldability Test)	-	0.0	-
6.1.2.2( Hydraulic Proof Test)	-	850.0	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850.0	-
6.1(Quick Coupled Pipes and Fittings)	-	0.0	-
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500.0	-
5.2(Dimensions of Quick Coupled Pump Connectors Table 3.)	-	0.0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0.0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0.0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0.0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0.0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0.0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0.0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0.0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.1.5(Rubber Ring)	-	4950.0	Hardness before Ageing: 375.0 Ageing : 4200.0 Hardness after Ageing: 375.0
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0.0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0.0	-
4.1 .3(Workmanship and Appearance)	-	300.0	-
4.1 .1.2.2(HDPE couplers)	-	0.0	-
4.1 .1.2.1(HDPE couplers)	-	0.0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700.0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1 (b)(HDPE couplers —)	-	0.0	-
4.1 (a)( Quick Coupled Male and Female Couplers)	-	0.0	-
4(QUICK COUPLED FITTINGS)	-	0.0	-
3(QUICK COUPLED PIPES)	-	17575.0	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	4800	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300.0	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	375	-
Cl 4.1.4(Holding attachments for coupler parts)	-	1700.0	850+850
Cl.4.1.3(Workmanship and appearance )	-	300.0	-
Cl.4.1(Quick Coupled Male and Female Couplers)	-	0.0	-

07 Oct, 2028

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

10625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	NA
9.5(Tensile Strength IS 12235(Part 13))	-	1600	1100 - Testing Charges 500 - Specimen Charges
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1300	Testing Charges - 1000.0 Specimen Charges - 300.0
9.3(Density IS 12235 (Part 14))	-	500	Nil
9.2(Internal Diameter)	-	250	Nil
9.1( Visual Appearance)	-	300	Nil
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1750	Testing Charges - 1000.0 Specimen Charges/ Conditioning Charges - 500 Dimension of thread for Screen & casing pipes - 250
8.4(Sealing rings - Hardness)	-	375	Nil
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250.0	Nil
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0	Charges included in dimension
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0.0	Charges included in dimension
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0.0	Charges included in dimension
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	0.0	Charges included in dimension
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	0.0	Charges included in dimension
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0.0	Charges included in dimension
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0.0	Charges included in dimension
7.3.2(Rib height)	-	0.0	Charges included in dimension
7.3.1(No.of Ribs)	-	0.0	Charges included in dimension
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0.0	Charges included in dimension
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0.0	Charges included in dimension
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0.0	Charges included in dimension
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0.0	Charges included in dimension
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0.0	Charges included in dimension
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0.0	Charges included in dimension
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	0.0	Charges included in dimension
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0.0	Charges included in dimension
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	0.0	Charges included in dimension
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0.0	Charges included in dimension
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0.0	Charges included in dimension
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	0.0	nil
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	0.0	nil
5(COLOUR)	-	0.0	Charges included in Visual Appearance
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	25 % discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.1.2(K-Value as per IS-4669)	-	1100	25 % discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	3000	25 % discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
8.4(Width b)	-	0	25 % discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	250	25 % discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.

07 Oct, 2028

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

31869.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000.0	Testing Charges - 5500.0 Specimen Charges - 500.0
8.9 table-6(Elongation at Break)	-	1600.0	Testing Charges - 1100.0 Specimen Charges - 500.0
8.8(Tensile Strength for Butt-fusion)	-	1600.0	Testing Charges - 1100.0 Specimen Charges - 500.0
8.7(Density)	-	500.0	Nil
8.5 (Oxidation Induction Time)	-	2200.0	Nil
8.4( Melt Flow Rate)	-	1100.0	Nil
8.2(Longitudinal Reversion Test)	-	900.0	Testing Charges - 700.0 Specimen Charges - 200.0
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600.0	Nil
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400.0	Nil
7.4.1.2(Ovality)	-	0.0	Charges included in Dimension Test
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500.0	Dimension of Pipe (MOD, Ovality, Thickness, Length)
7.2(Length)	-	0.0	Charges included in Dimension
6.2.1(6.1.1 Identification Stripes)	-	250.0	Nil
6.2(Colour)	-	250.0	Nil
8.6(Overall migration)	-	2000.0	Testing Charges - 1700.0 Specimen Charges - 300.0
8.3(Carbon black)	-	1625.0	CBC - 925 CBD - 700

07 Oct, 2028

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

7463 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.1 (chem)(Workmanship and Finish)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.2 (chem)(Design, Shape & Dimension)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.3(Workmanship, Finish & Appearance)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.2(TRANSPARANCY)	-	700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3(LEAKAGE TEST)	-	1000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.4(DROP TEST)	-	1100	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5(MIGRATION TEST)	-	1700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.6(PORTABILITY TEST)	-	2900	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5.1 (chem)(Colour migration (Caps))	-	0	Nil
4.6.5.1 (chem)(Colour migration (Container))	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

4288 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100.0	VCM Content - 3000 K-Value - 1100 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4(Size of fitting)	-	0.0	Charges include in Dimension 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0.00	Charges include in dimension of socket 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0.0	Charges include in dimension of socket 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0.0	Charges include in dimension of socket 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	1350.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges. Testing Charge - Rs 8,50 Sample Preparation - Rs 500
8(Marking)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
15.4 (b)(Cold impact)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
9.1(PIPE ENDS)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
6.3(Effect on water test)	-	3000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000	Total Charges for effect on water 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	3000.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	3000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	3000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	3000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.1, Table-1, Fig-1(Nominal size)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.1, Table-1, Fig-1(B)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.1, Table-1, Fig-1(Plumbing)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Clause 3.2.2, and Fig. 2(Nominal size)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Clause 3.2.2, and Fig. 2.(B)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.1(General)	-	9025	For UPVC Fittings - 4925 Raw Material (K-Value & VCM Content) K-Value - 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material (K-value & VCM Content) - 1100+3000 = 4100 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 1(Manufacture)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 1(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table-1 (cl.3.2.2, Fig 1)(Dimensions of Straight Reducers)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material (K-value & VCM Content) - 1100+3000 = 4100 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 1(Manufacture)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 1(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material (K-value & VCM Content) - 1100+3000 = 4100 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 1(Manufacture)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 1(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Equal Tees)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material (K-value & VCM Content) - 1100+3000 = 4100 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 1(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 2, table 2(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 2 (Cl.3.2.2, and Fig.1)(Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

4288 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	4288	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2(Materials)	-	4100	K-Value = 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.3, 3.3.1, Fig 1(Manufacture)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.3.2, table 1, fig 1(Dimensions)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.3.3(socket measurement shall comply with IS 10124 (Part 1).)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1 (Clauses 3.3.1 and 3.3.2)(Dimensions of Threaded Adaptors)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material K-Value - 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 2, table 2(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 90o Bends)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material K-Value - 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 1, table 1(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1)(Dimensions of 60o Bends)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material K-Value - 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2, 3.2.1, Fig 2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Fig 1, table 1(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 45o Bend)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material K-Value - 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

4925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	9025	UPVC Fittings - 4925 Raw Material K-Value - 1100 VCM Content - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
3.2.3(Socket, Measurement)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

16000.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300.0	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100.0	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500.0	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0.0	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0.0	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0.0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0.0	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0.0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300.0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000.0	700+300 (Specimen Charges)
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700.0	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100.0	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	4350.0	1100+250 3500 (UV Exposure)-Natural 21800 (Weatherometer Xenon arc for 116 hrs) - Optional
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500.0	2000+500 (Specimen Charges)
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400.0	1100+300 (Specimen Charges)
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1350.0	1100+250 (Specimen Charges)
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700.0	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	500.0	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000.0	-

07 Oct, 2028

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

19380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material Identification)	-	1050	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1100	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	900	-
3.2(Unlaminated Fabric Mass )	-	250	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
4.2 and Table 1 v(Mass of sack )	-	250	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
4.2 and Table 1 x(Ash content )	-	950	-

07 Oct, 2028

-
-

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

19140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	250	-
3.2(Tapes – Linear Density )	-	0.0	-
3.3(Tying Cord)	-	0.0	-
3.4(Sack)	-	0.0	-
3.4.1(Seam)	-	250	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	-
4.1 and Table 1 ii(Ends per dm )	-	250	-
4.1 and Table 1 iii(Picks per dm )	-	250	-
4.2 and Table 1 iv(Mass of sack )	-	300	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12540	-
4.1 and Table 1 ix(Ash content )	-	950	-

07 Oct, 2028

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

19480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.2(Construction)	-	0	-
4.3.1(Bottom Seam)	-	250	-
4.3.1( The two rows of stitches shall be separated from each other)	-	250	-
4.3.1( The outer stitch)	-	250	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	-
4.3.1(The number of stitches/dm)	-	250	-
4.3.2(Mouth)	-	250	-
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v(Mass of sack )	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
5.2 and Table 1 x(Ash content )	-	950	-

07 Oct, 2028

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	-
5.1.2(Film Form)	-	300	-
5.1.3(Odour)	-	300	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	250	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1100	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1100	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1100	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1000	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1100	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tear resistance , Annex B)	-	2000	1500+500
8.1, Table 3(Puncture resistance , Annex C)	-	1350	1100+250
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tear resistance , Annex B)	-	2000	1500+500
9.1, Table 4(Puncture resistance , Annex C)	-	1350	1100+250
Clause 9.1 (Table 4)(Break Elongation)	-	1100	-
Clause 9.1 (Table 4)(Yield Elonation)	-	1100	-
Clause 9.1 (Table 4)(Break strength)	-	1100	-
Clause 9.1 (Table 4)(Yield strength)	-	1100	-
Clause 8.1(Table 3)(Break Elongation)	-	1100	-
Clause 8.1(Table 3)(Break strength)	-	1100	-
Clause 7.1(Table 2)(Dart Impact Strength)	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 5.2.3(Tolerance on Width)	-	250	-

07 Oct, 2028

-
-

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.2(Opacity- Appendix B)	-	700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	0	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	Combined Charges for all extraction - 3000 25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4313	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2(diameter of the socket of cap)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4313	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Size)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3( inside diameter of the socket)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3(socket length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4313	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Size)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3( inside diameter of the socket)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3(Socket length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4313	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Size)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3( inside diameter of the socket)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3(Socket length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4313	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Size)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Socket Laying Length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3( inside diameter of the socket)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3(Socket length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	4313	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2(Manufacture)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Size)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.2, Table 1(Union Laying Length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3( inside diameter of the socket)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.
2.2.3(Socket length)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation and conditioning charges.

07 Oct, 2028

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

9725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	250.0	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (b)Tolerance on OD)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
6.0 (6.1) (Visual appearance)	-	300.0	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000.0	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000.0	-
8.0 (8.1) (Supply of pipes )	-	0.0	Charges include in visual Appearance
9.0 (9.1)(Coiling )	-	0.0	Charges include in visual Appearance
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	0.0	Charges include in Dimension
3.1(Class of Pipe)	-	0.0	Charges include in visual Appearance
6.1(Visual Appearance)	-	300.0	-
7.2(Reversion Test)	-	1000	Testing Charges - 700 Specimen Charges - 300 Total Charges - 1000
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0.0	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0.0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200.0	0.0
7.3(Elongation at Break)	-	1350.0	Testing Charges - 1100 Specimen Charges - 250 Total Charges - 1350 Charges include for tensile test
7.3(Tensile Test)	-	0.0	Charges include in Elongation at Break
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	700	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.1.c.i (Density)	-	1125	Testing Charges - 500 Specimen Charges - 625

07 Oct, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hajipur

INDUSTRIAL AREA, Hajipur, Vaishali, Bihar, 844102

7781020335 testing-hajipur@cipet.gov.in

Scope List