BIS - LIMS (Laboratory Information Management System)

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

S-1, GNEPIP Surajpur Industrial Area, Kasna Phase V, Greater Noida, Gautam Buddha Nagar, Gautam Buddha Nagar, Uttar Pradesh, 201308

9873571512 qa.gn@xoin.eurofinsasia.com

Scope List

Reset

59 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

150000 View breakup
Rs.45000/-Visual display units, video monitors of screen size above 32” & up to 58”, Rs.68000/-Visual display units, video monitors of screen size above 58” & up to 90”, Rs.45000/- for Laptop/ notebook/ tablet, Printers, plotters, Scanners, Telephone answering machines, Automatic data processing machine, Cash registers, Point of sale terminals, Copying machines/duplicators, Smart card readers, Mail processing machines/postage machines/Franking machines, Passport reader, Set top box and Power banks for use in portable applications, Rs.30000/- Wireless keyboards, Rs.35000/-Mobile phone, Rs.40000/-Power adaptors for IT equipment. Following Additional Products Included: Rs.40,000/- For VDU, Video Monitors of screen size up to 32”, CCTV Cameras/CCTV Recorders, USB Driven Barcode Readers, Barcode Scanners, Iris scanners, Optical finger print Scanners; Rs.35,000/- For Smart Watches. ADDITIONAL PRODUCTS FOR PHASE IV & V INCLUDED W.E.F. 17-3-21: • Digital Camera Rs.40000/-, • Keyboard Rs.35000/- • Automatic teller cash dispensing machines Rs.150000/- • USB type external hard disk drive Rs.35000/- • USB type external solid – state device (above 256 GB capacity) Rs.40000/- • Standalone switch mode power supplies (SMPS) with output voltage 48 V max Rs.40000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	0	NA
1.6(Power interface .)	-	2000	NA
1.7(Markings and instructions)	-	1000	NA
2.1(Protection from electric shock and energy hazards)	-	2500	NA
2.2(SELV circuits)	-	2500	NA
2.3(TNV circuits)	-	2500	NA
2.4(Limited current circuits)	-	2500	NA
2.5(Limited power sources .)	-	2500	NA
2.6(Provisions for earthing and bonding)	-	2500	NA
2.7(Overcurrent and earth fault protection in primary circuits)	-	2500	NA
2.8(Safety interlocks)	-	2500	NA
2.9(Electrical insulation)	-	2500	NA
2.10(Clearances, creepage distances and distances through insulation)	-	2500	NA
3.1(General)	-	100	NA
3.2(Connection to a mains supply)	-	900	NA
3.3(Wiring terminals for connection of external conductors)	-	1000	NA
3.4(Disconnection from the mains supply)	-	1000	NA
3.5(Interconnection of equipment)	-	1000	NA
4.1(Stability)	-	1000	NA
4.2(Mechanical strength)	-	3000	NA
4.3(Design and construction)	-	2000	NA
4.4(Protection against hazardous moving parts)	-	2000	NA
4.5(Thermal requirements)	-	15000	NA
4.6(Openings in enclosures)	-	1000	NA
4.7(Resistance to fire)	-	10000	NA
5.1(Touch current and protective conductor curren)	-	5000	NA
5.2(Electric strength)	-	2000	NA
5.3(Abnormal operating and fault conditions)	-	5000	NA
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	10000	NA
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	10000	NA
6.3(Protection of the telecommunication wiring system from overheating)	-	5000	NA
7.1(General)	-	5000	NA
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	5000	NA
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5000	NA
7.4(Insulation between primary circuits and cable distribution systems)	-	10000	NA

04 Jan, 2030

-
Additional Products Included w.e.f. 07.06.2018. Excluding: Cathode ray tubes (Cl.4.2.8), Mechanical strength test (cl.4.2.8), Ionizing radiation test (Cl.4.3.13.2), Lasers (including LED) (Cl.4.3.13.5), Component test (Cl.1.5), Human exposure to UV radiation (Cl.4.3.13.4), Effect of UV on materials (Cl.4.3.13.3).

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	1000	Freedom from defect
Cl 10.3(UTM)	-	0	NA
Cl 11.3(Press)	-	500	NA
Cl 12(Sudden Load Applied)	-	4000	NA
Cl 13(Y Groove Cracking Test)	-	5000	NA
Cl 15(Length, Width & Thickness)	-	1000	NA
Cl 18(Weight)	-	1000	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1500	NA
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1500	NA
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1500	NA
Cl 7(Workmanship)	-	0	NA
14.1(Soundness test)	-	1500	NA
14.2(Grain Size)	-	1000	NA
14.2(Inclusion)	-	1000	NA

04 Jan, 2030

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	1000	Freedom from defect
Cl 10.2(Press)	-	0	Bend Test
Cl 11(Length, Width & Thickness)	-	1000	NA
6.1(Carbon %)	-	300	Testing Charges for Silicon is carbon 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Manganese %)	-	300	Testing Charges for Manganese is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Phosphorus %)	-	300	Testing Charges for Phosphorus is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Sulphur %)	-	300	Testing Charges for Sulphur is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Silicon %)	-	300	Testing Charges for Silicon is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1( Copper %)	-	300	Testing Charges for Copper is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1( Aluminium %)	-	300	Testing Charges for Aluminum is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1( Nb)	-	300	Testing Charges for Nobium is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(V)	-	300	Testing Charges for Vanadium is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1( Ti)	-	300	Testing Charges for Titanium is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Cr)	-	300	Testing Charges for Chromium is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Mo)	-	300	Testing Charges for Molybdenum is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1(Ni)	-	300	Testing Charges for Nickel is INR 300 Complete Chemical Composition Charges INR 1500 + GST
6.1( Nitrogen%)	-	1000	Testing Charges for Nitrogen is INR 300 Complete Chemical Composition Charges INR 1500 + GST
Cl. 10.2(Bend)	-	1000	NA
Cl 11(Length)	-	0	NA
Cl. 10.3(Camber)	-	1000	NA
11(Width)	-	0	NA
11(Thickness)	-	0	NA
10.1 (a)(Macro-examination)	-	1500	NA
10.1 (b)(Sulphur print)	-	1500	NA
Clause 9(Freedom from Defect)	-	1000	NA

04 Jan, 2030

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9( FREEDOM FROM DEFECTS)	-	1000	NA
10.1.a)( Macro examination IS 11371)	-	1500	NA
10.1.b)( Sulphur print tests IS 12037)	-	1500	NA
11 & 12(DIMENSIONS and Tolerances)	-	1500	NA
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	Complete chemical composition 2500 INR and per element 1000 INR
11(Dimensions)	-	0	NA
Cl. 11, 12 Table 3(Thickness )	-	0	NA
Cl. 11, 12 Table 3(Width Across Flat)	-	0	NA

04 Jan, 2030

-
-

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	1500	NA
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	750	NA
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	750	NA
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	750	NA
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	750	NA
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1250	NA
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	1250	NA
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	750	NA
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	750	NA
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	2500	NA
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	1000	NA
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	7500	NA
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	5000	NA
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	5000	NA
7.2(Uniformity Requirements)	-	5000	NA
5.1, 7.1, table-2, iii(Lime reacitivity)	-	7500	NA

04 Jan, 2030

-
-

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	750	NA
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	750	NA
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	750	NA
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	750	NA
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	1250	NA
5.1, 6.1, Table 1(Total chlorides)	-	750	NA
6.2(moisture content)	-	750	NA
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	2500	NA
7.1, Table 1(Soundnes)	-	2000	NA
7.2(Uniformity Requirements)	-	2000	NA
8.3(Independent Testing)	-	2000	NA
11.1(Supplies of pulverized fuel)	-	750	NA
11.2(Tolerance Requirements for the Quantity of Pulverized Fuel Ash Packed in Bags)	-	1000	NA
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	1000	NA
5.1, 6.1, Table 1(Loss on ignition)	-	750	NA

04 Jan, 2030

-
-

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	500	NA
Cl 4.2(Workmanship)	-	0	NA
Cl 4.3(Workmanship)	-	500	NA
Cl 6.2(Press)	-	500	NA
Cl 6.3(HWB)	-	500	*HWB INCORRECT , CLAUSE 6.3 PENCIL HARDNESS
Cl 6.4(Load Resistance)	-	1000	NA
Cl 6.5(Cross Hatch)	-	500	NA
Cl 8(Salt Spray)	-	35000	Class 1- 6500, Class 2 - 8000, Class 3 - 35000
Cl 9(Length, Width, Thickness & Mass)	-	1500	NA
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1500	NA
Cl. 7.3.1(Gloss Bottom Coat)	-	500	NA
Cl. 9.4.4(Mass)	-	1000	NA

04 Jan, 2030

-
-

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2, Table 3(Tensile Test-1608:Part 1)	-	500	Complete tensile testing including (UTS, YS & Elongation) - 1500 INR
8.2, Table 3(Proof Stress, N/mm2)	-	500	Complete tensile testing including (UTS, YS & Elongation) - 1500 INR
8.2, Table 3(Elongation, %)	-	500	Complete tensile testing including (UTS, YS & Elongation) - 1500 INR
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1500	NA
8.4(Bend Test)	-	1000	NA
8.5(Erichsen Cupping Test)	-	1500	NA
10.1(Thickness, mm)	-	1000	Complete dimension (Length, Width & Thickness) 1500 INR
10.2(width, mm)	-	1000	Complete dimension (Length, Width & Thickness) 1500 INR
10.3(Length, mm)	-	1000	Complete dimension (Length, Width & Thickness) 1500 INR
10.4(Flatness,mm)	-	1000	NA
10.5(Camber, mm)	-	1000	NA
11(Surface Finish)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete Chemical composition 1500/- INR & Single Element 500 INR
Cl . 6 .0(Freedom from defect)	-	1000	NA

04 Jan, 2030

-
-

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

9375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Lead Restriction)	-	1000	NA
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	300	NA
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	300	NA
Cl 4.3, Table 1, S.no. iii)(Finish)	-	200	NA
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	300	NA
Cl 4.3, Table 1, S.no. v)(Colour)	-	200	NA
Cl 4.3, Table 1, S.no. vi)( Mass)	-	200	NA
Cl 4.3, Table 1, S.no. vii)(Water content)	-	1000	NA
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	1000	NA
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	300	NA
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	1000	NA
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	300	NA
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	300	NA
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	300	NA
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	300	NA
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	300	NA
Cl 4.3, Table 1, S.no.xvi)(Keeping properties)	-	10000	NA

04 Jan, 2030

-
-

IS 164 (2015)

Ready mixed paint for road marking - Specification (Second Revision)

24900 View breakup
Rs.14900/-+10000 for keeping properties

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Application)	-	2000	NA
Cl 5.3(Durability)	-	2000	NA
Cl. 5.4(Lead Restriction)	-	1000	NA
Cl 5.5, Table 1, S.no. i)(Drying time, a) Surface dry)	-	250	NA
Cl 5.5, Table 1, S.no. i)(Drying time, b) Hard dry)	-	250	NA
Cl 5.5, Table 1, S.no. ii)(Consistency)	-	500	NA
Cl 5.5, Table 1, S.no. iii)(Finish)	-	300	NA
Cl 5.5, Table 1, S.no. iv)(Colour)	-	300	NA
Cl 5.5, Table 1, S.no. v)(Wet opacity)	-	1000	NA
Cl 5.5, Table 1, S.no. vi)(Resistance to bleeding)	-	2000	NA
Cl 5.5, Table 1, S.no. vii)(Recoating property)	-	2000	NA
Cl 5.5, Table 1, S.no. viii)(Resistance to wear: a) For Grade 1)	-	2000	NA
Cl 5.5, Table 1, S.no. viii)(Resistance to wear: a) For Grade 2)	-	2000	NA
Cl 5.5, Table 1, S.no. ix)(Residue on sieve)	-	2000	NA
Cl 5.5, Table 1, S.no. x)(Flash point )	-	500	NA
Cl 5.5, Table 1, S.no. xi)(xi) Mass)	-	300	NA
Cl 5.5, Table 1, S.no. xii)(Keeping properties)	-	10000	NA
Cl 5.6 & Cl 5.6.2.1(Optional Requirement for ECO-Mark, volatile organic compounds,)	-	2000	NA
5.6.2.2(Optional Requirement for ECO-Marktoxic metals such as cadmium, chromium (VI) and their compounds)	-	2000	NA

04 Jan, 2030

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	6000	--
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	4000	--
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	--
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2500	--
7 Table-3 iii b(Setting Time Final)	-	750	--
7 Table-3 iii a(Setting Time Initial)	-	800	--
7 Table-3 ii b(Expansion after aeration)	-	2000	--
7 Table-3 ii b(Expansion by Autoclave)	-	2000	--
7 Table-3 ii a(Expansion after aeration)	-	1500	--
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	--
7 Table-3 i.(Fineness)	-	2000	--
6.1 Table-2 viii(Alkali content)	-	1250	--
6.1 Table-2 vii(Chloride content)	-	750	--
6.1 Table-2 vi(Loss on ignition)	-	750	--
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	750	--
6.1 Table-2 iv(Magnesia)	-	750	--
6.1 Table-2 iii.(Insoluble residue)	-	750	--
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	750	--
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	750	--
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1250	--

04 Jan, 2030

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Upto 200 mm Dia

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6, 6.1(PIPE DESCRIPTION)	-	500	OK
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	OK
8.2(Longitudinal Reversion Test)	-	2000	OK
8.4( Melt Flow Rate)	-	2500	OK
8.5 (Oxidation Induction Time)	-	5000	OK
8.7(Density)	-	500	OK
8.8(Tensile Strength for Butt-fusion)	-	2000	OK
8.9 table-6(Elongation at Break)	-	2000	OK
8.10(Slow Crack Growth Rate)	-	20000	OK
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	10000	OK
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	20000	OK
6.2(Colour)	-	500	OK
6.1.3 (PIPE DESCRIPTION)	-	500	OK
6.2.1(6.1.1 Identification Stripes)	-	500	OK
7.1(Visual Appearance)	-	500	OK
7.2(Length)	-	500	OK
Clause 7.3(Coiling)	-	500	OK
Clause 8.3(Carbon Black Dispersion)	-	1500	OK
8.6(Overall migration)	-	4000	OK
8.3(Carbon black)	-	2000	OK

04 Jan, 2030

-
Up to 200 DN

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

68000 View breakup
Rs.51000/- for plasma/LCD/LED televisions of screen size 32” & above up to 58”, Rs.68000/- for plasma/LCD/LED televisions of screen size above 58” & up to 90”, Rs.30000/- optical disc player with built in amplifiers of input power 200W and above, Rs.35000/-Amplifiers with input power 2000W and above, Rs.51000/- Electronic musical system with input power 200W and above, Rs.30000/- Electronic games (Video), Rs.51000/- Power adopters for audio, video & similar electronic apparatus. Following Additional Products Included: Rs.45,000/-for Plasma/ LCD/ LED TV of screen size up to 32”. ADDITIONAL PRODUCTS FOR PHASE IV & V INCLUDED W.E.F. 17-3-21: • Television other than Plasma/LCD/LED/TVs Rs.50000/- • Wireless headphone and earphone Rs.35000/- • Electronic musical system with input power below than 200W Rs.35000/- • Wireless microphone Rs.35000/- • Video camera Rs.45000/- • Webcam (finished product) Rs.35000/- • Bluetooth speaker Rs.35000/- • Smart speaker (with and without display) Rs.45000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	1000	NA
6(Hazardous radiations)	-	5000	NA
7(Heating under normal operating conditions)	-	10000	NA
8(Constructional requirements with regard to the protection against electric shock)	-	10000	NA
9(Electric shock hazard under normal operating conditions)	-	7000	NA
10(Insulation requirements)	-	20000	NA
11(Fault conditions)	-	5000	NA
12(Mechanical strength)	-	23000	NA
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	NA
14(Components)	-	0	NA
15(TERMINALS)	-	2000	NA
16(External flexible cords)	-	5000	NA
17(Electrical connections and mechanical fixings)	-	3000	NA
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	NA
19(Stability and mechanical hazards)	-	5000	NA
20(Resistance to fire)	-	10000	NA
6.3()	-	0	NA

04 Jan, 2030

-
REVISEDE VERSION AS PER IS 616:2017 Included. Excluding: Mechanical strength and Implosion test (Cl.18), Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Component test (Cl.14). Additional Products Included w.e.f. 07.06.2018.

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1500	NA
Cl 9(Press)	-	1000	NA
Cl 10(Sudden Load Applied)	-	4000	NA
Cl 11(Expansion Test)	-	3500	NA
Cl 13(Workmanship)	-	1000	Freedom from Defect
Cl 14(Weldability)	-	1000	NA
Cl 15(Length, Width & Thickness)	-	1500	NA
7.1(Carbon %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Manganese %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Phosphorus %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Sulphur %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Silicon %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1( Copper %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1( Aluminium %)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1( Nb)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(V)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1( Ti)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Cr)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Mo)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(Ni)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1( Nitrogen%)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
7.1(CE)	-	1500	Complete Chemical composition 1500 INR Single Element 300 INR.
Clauses 13(Freedom From defect)	-	1000	NA
Clause 16(Mass)	-	1000	NA

04 Jan, 2030

-
-

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

12100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	Complete chemical composition 1500 INR Single element 300 INR
6(Freedom from defects , IS 6911)	-	1000	NA
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1500	NA
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	1500	NA
10.3(Bend Test - IS 1599)	-	1000	NA
11,Table 7(Erichsen cupping test-IS 10175)	-	1500	NA
15(Surface Finish)	-	500	NA
17(Dimension and tolerance)	-	1000	NA
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	5000	NA
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	5000	NA

04 Jan, 2030

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	0	NA
Cl 8.2(Press)	-	1000	NA
Cl 10(Galvanising Test)	-	0	NA
Cl 12(Workmanship)	-	1000	NA
Cl 13(Weight)	-	1000	NA
Cl 14(Length, Width & Thickness)	-	1500	NA
7.4(Mass of Coating: Single Spot Test)	-	1000	NA
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	NA
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	0	NA
5.1(phosphorus)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
5.1(aluminium)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
5.1(manganese)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
5.1(carbon)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
5.1(sulphur)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
5.1(Titanium)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
5.1(micro alloy)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
Cl. 17(Marking )	-	0	NA
5.1(carbon)	-	0	NA
5.1(manganese)	-	0	NA
5.1(sulphur)	-	0	NA
5.1(phosphorus)	-	0	NA
5.1(aluminium)	-	0	NA
5.1(silicon )	-	0	NA
5.1(nitrogen)	-	0	NA
5.1(copper)	-	0	NA
5.1(micro alloy)	-	0	NA
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	1000	Tensile ,Yield & Elongation 1000 INR
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	1000	Tensile ,Yield & Elongation 1000 INR
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	1500	Tensile ,Yield & Elongation 1000 INR
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	1500	Complete chemical composition 1500 INR & Single element 300 INR
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	500	NA
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	500	NA
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	500	NA
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	500	NA
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	500	NA
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	500	NA
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	500	NA

04 Jan, 2030

-
REVISED VERSION Included w.e.f. 17.07.2018.

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9 (Dimensions & tolerances)()	-	1000	NA
Table-1,(Clauses 5.1 and 7.2)(Carbon)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Sulphor)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Phosphorous)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Manganese)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Silicon)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Aluminium)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Chromium)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Nickel)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Molybdenum)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Copper)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Boron)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Vanadium)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Titanium)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(Nitrogen)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
Table-1,(Clauses 5.1 and 7.2)(S+P)	-	1500	Complete chemical composition 1500 INR Single element 300 INR
9(Dimesion (Diameter))	-	0	NA
9(Dimesion (Out of Roundness))	-	1000	NA
10(Mechanical Properties (Tensile strength))	-	1500	Tensile & Reduction of Area 1500 INR
10(Mechanical Properties (Reduction in Area))	-	1500	Tensile & Reduction of Area 1500 INR
12(Surface Defects)	-	1000	NA
13(Decarburization Test)	-	1500	NA
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thin, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type B (Alumina Type) (Thin, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type C (Silicate Type) (Thin, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type D( Globular Oxide Type ) (Thin, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thin, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type C (Silicate Type) (Thin, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type D( Globular Oxide Type ) (Thin, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thick, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type B (Alumina Type) (Thick, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type C (Silicate Type) (Thick, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type D( Globular Oxide Type ) (Thick, worse))	-	2000	Complete Non-metallic Inclusion 2000 INR
16(Axial Segregation (Optional))	-	2500	NA
14(Type B (Alumina Type) (Thin, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thick, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type B (Alumina Type) (Thick, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type C (Silicate Type) (Thick, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
14(Type D( Globular Oxide Type ) (Thick, Mean))	-	2000	Complete Non-metallic Inclusion 2000 INR
15(Microstructure)	-	2500	NA

04 Jan, 2030

-
REVISED VERSION INCLUDED FOR IS 7904:2018.

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

up to size 3m x 3m

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	350000	Installation of sample to be done by client itself at our facility.
Cl 7.2.2(SIZE (width))	-	1000	Installation of sample would be done by client itself at our facility.
Cl 7.3.2(SIZE (width))	-	1000	Installation of sample would be done by client itself at our facility.
Cl 7.4.2(SIZE (width))	-	1000	Installation of sample would be done by client itself at our facility.
Cl 7.5.2(SIZE (width))	-	1000	Installation of sample would be done by client itself at our facility.
7.3.4(Vision Pane (Width))	-	1000	Installation of sample would be done by client itself at our facility.
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	Installation of sample would be done by client itself at our facility.
7.3.1(MOISTURE CONTENT)	-	3000	Installation of sample would be done by client itself at our facility.
Cl 7.2.2(SIZE (Height))	-	1000	Installation of sample would be done by client itself at our facility.
Cl 7.3.2(SIZE (Height))	-	1000	Installation of sample would be done by client itself at our facility.
Cl 7.4.2(SIZE (Height))	-	1000	Installation of sample would be done by client itself at our facility.
Cl 7.5.2(SIZE (Height))	-	1000	Installation of sample would be done by client itself at our facility.
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	Installation of sample would be done by client itself at our facility.
7.2.7(Vision Pane (Insulated door) Width)	-	1000	Installation of sample would be done by client itself at our facility.
7.3.4(Vision Pane (Height))	-	1000	Installation of sample would be done by client itself at our facility.
7.2.7(Vision Pane (Insulated door) Height)	-	1000	Installation of sample would be done by client itself at our facility.
4(Integrity, Insulation)	-	350000	-
Cl 7.2.2(SIZE (width))	-	1000	-
Cl 7.3.2(SIZE (width))	-	1000	-
Cl 7.4.2(SIZE (width))	-	1000	-
Cl 7.5.2(SIZE (width))	-	1000	-
7.3.4(Vision Pane (Width))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	-
7.3.1(MOISTURE CONTENT)	-	3000	-
Cl 7.2.2(SIZE (Height))	-	1000	-
Cl 7.3.2(SIZE (Height))	-	1000	-
Cl 7.4.2(SIZE (Height))	-	1000	-
Cl 7.5.2(SIZE (Height))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	-
7.2.7(Vision Pane (Insulated door) Width)	-	1000	-
7.3.4(Vision Pane (Height))	-	1000	-
7.2.7(Vision Pane (Insulated door) Height)	-	1000	-
4(Integrity, Insulation)	-	350000	-
Cl 7.2.2(SIZE (width))	-	1000	-
Cl 7.3.2(SIZE (width))	-	1000	-
Cl 7.4.2(SIZE (width))	-	1000	-
Cl 7.5.2(SIZE (width))	-	1000	-
7.3.4(Vision Pane (Width))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	-
7.3.1(MOISTURE CONTENT)	-	3000	-
Cl 7.2.2(SIZE (Height))	-	1000	-
Cl 7.3.2(SIZE (Height))	-	1000	-
Cl 7.4.2(SIZE (Height))	-	1000	-
Cl 7.5.2(SIZE (Height))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	-
7.2.7(Vision Pane (Insulated door) Width)	-	1000	-
7.3.4(Vision Pane (Height))	-	1000	-
7.2.7(Vision Pane (Insulated door) Height)	-	1000	-
Cl-7.2.1(Material)	-	2500	-
Cl-7.2.4(Fire Door Frames)	-	1000	-
Cl-7.2.5(Door Leaf)	-	1000	-
Cl-7.2.8(Louvres)	-	1000	-
Cl-7.2.9(Builder’s Hardware)	-	1000	Certified Details provided by the Manufacturer/Client
Cl-7.4.3(Construction)	-	1000	Details provided by the Manufacturer/Client
Cl-7.4.5(Operator)	-	1000	Certified details provided by the manufacturer.
Cl-7.5.1(Material)	-	2500	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	1000	-
Cl-11.3.1(Walls)	-	1000	-
Cl-11.4.1(Closing Devices)	-	1000	-
Cl-11.4.2(Releasing Devices)	-	1000	-
Cl-11.4.3(Hardware)	-	1000	Hardware Certified details provided by the manufacturer.
4(Integrity, Insulation)	-	350000	-
Cl 7.2.2(SIZE (width))	-	1000	-
Cl 7.3.2(SIZE (width))	-	1000	-
Cl 7.4.2(SIZE (width))	-	1000	-
Cl 7.5.2(SIZE (width))	-	1000	-
7.3.4(Vision Pane (Width))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	-
7.3.1(MOISTURE CONTENT)	-	3000	-
Cl 7.2.2(SIZE (Height))	-	1000	-
Cl 7.3.2(SIZE (Height))	-	1000	-
Cl 7.4.2(SIZE (Height))	-	1000	-
Cl 7.5.2(SIZE (Height))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	-
7.2.7(Vision Pane (Insulated door) Width)	-	1000	-
7.3.4(Vision Pane (Height))	-	1000	-
7.2.7(Vision Pane (Insulated door) Height)	-	1000	-
Cl-7.2.1(Material)	-	3000	-
Cl-7.2.4(Fire Door Frames)	-	1000	-
Cl-7.2.5(Door Leaf)	-	1000	-
Cl-7.2.8(Louvres)	-	1000	-
Cl-7.2.9(Builder’s Hardware)	-	1000	-
Cl-7.4.3(Construction)	-	1000	-
Cl-7.4.5(Operator)	-	5000	-
Cl-7.5.1(Material)	-	3000	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	1000	-
Cl-11.3.1(Walls)	-	2000	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	2000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	2000	-
Cl-7.2.6(Intumescent Seal)	-	2000	-
Cl-7.3.3(Construction)	-	2000	-
Cl-7.3.6(Builder’s Hardware)	-	2000	-
Cl-7.2.3(Construction)	-	2000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	2000	-
Cl-7.6(General Requirement of Fire Doors)	-	2000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	2000	-
4(Integrity, Insulation)	-	350000	-
Cl 7.2.2(SIZE (width))	-	1000	-
Cl 7.3.2(SIZE (width))	-	1000	-
Cl 7.4.2(SIZE (width))	-	1000	-
Cl 7.5.2(SIZE (width))	-	1000	-
7.3.4(Vision Pane (Width))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	-
7.3.1(MOISTURE CONTENT)	-	1000	-
Cl 7.2.2(SIZE (Height))	-	1000	-
Cl 7.3.2(SIZE (Height))	-	1000	-
Cl 7.4.2(SIZE (Height))	-	1000	-
Cl 7.5.2(SIZE (Height))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	-
7.2.7(Vision Pane (Insulated door) Width)	-	1000	-
7.3.4(Vision Pane (Height))	-	1000	-
7.2.7(Vision Pane (Insulated door) Height)	-	1000	-
Cl-7.2.1(Material)	-	1000	-
Cl-7.2.4(Fire Door Frames)	-	1000	-
Cl-7.2.5(Door Leaf)	-	1000	-
Cl-7.2.8(Louvres)	-	1000	-
Cl-7.2.9(Builder’s Hardware)	-	1000	-
Cl-7.4.3(Construction)	-	1000	-
Cl-7.4.5(Operator)	-	0	-
Cl-7.5.1(Material)	-	2500	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	1000	-
Cl-11.3.1(Walls)	-	1000	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	1000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	1000	-
Cl-7.2.6(Intumescent Seal)	-	1000	-
Cl-7.3.3(Construction)	-	1000	-
Cl-7.3.6(Builder’s Hardware)	-	1000	-
Cl-7.2.3(Construction)	-	1000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	1000	-
Cl-7.6(General Requirement of Fire Doors)	-	1000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	1000	-
4(Integrity, Insulation)	-	350000	-
Cl 7.2.2(SIZE (width))	-	1000	-
Cl 7.3.2(SIZE (width))	-	1000	-
Cl 7.4.2(SIZE (width))	-	1000	-
Cl 7.5.2(SIZE (width))	-	1000	-
7.3.4(Vision Pane (Width))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	1000	-
7.3.1(MOISTURE CONTENT)	-	3000	-
Cl 7.2.2(SIZE (Height))	-	1000	-
Cl 7.3.2(SIZE (Height))	-	1000	-
Cl 7.4.2(SIZE (Height))	-	1000	-
Cl 7.5.2(SIZE (Height))	-	1000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	1000	-
7.2.7(Vision Pane (Insulated door) Width)	-	1000	-
7.3.4(Vision Pane (Height))	-	1000	-
7.2.7(Vision Pane (Insulated door) Height)	-	1000	-
Cl-7.2.1(Material)	-	2500	-
Cl-7.2.4(Fire Door Frames)	-	1000	-
Cl-7.2.5(Door Leaf)	-	1000	-
Cl-7.2.8(Louvres)	-	1000	-
Cl-7.2.9(Builder’s Hardware)	-	1000	-
Cl-7.4.3(Construction)	-	1000	-
Cl-7.5.1(Material)	-	2500	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	1000	-
Cl-11.3.1(Walls)	-	1000	-
Cl-11.4.3(Hardware)	-	1000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	1000	-
Cl-7.2.6(Intumescent Seal)	-	1000	-
Cl-7.3.3(Construction)	-	1000	-
Cl-7.3.6(Builder’s Hardware)	-	1000	-
Cl-7.2.3(Construction)	-	1000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	1000	-
Cl-7.6(General Requirement of Fire Doors)	-	1000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	1000	-

04 Jan, 2030

-
Included w.e.f. 21.10.2024 only for fire doors of area upto 3m x 3m

IS 16048 : Part 2 (2021)

SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS PART 2: NICKEL-METAL HYDRIDE

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Parameter measurement tolerances)	-	0	-
Cl-5.1(Cell designation)	-	0	-
Cl-5.3(Marking)	-	0	-
Cl-6.1.1(General)	-	0	-
Cl-6.1.2(Small prismatic cells)	-	0	-
Cl-6.1.3.1(Cells dimensionally interchangeable with primary cells)	-	0	-
Cl-6.1.3.2(cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-6.2(Button cells)	-	0	-
Cl-6.3(9 V type nickel-metal hydride batteries)	-	0	-
Cl-7.1(General)	-	0	-
Cl-7.2(Charging procedure for test purposes)	-	15000	-
Cl-7.3.2.2(Discharge performance for cells at 20 °C)	-	15000	-
Cl-7.3.2.3(Discharge performance for batteries at 20 °C)	-	15000	-
Cl-7.3.2.4(Rated capacity (mAh) compliance test (example))	-	15000	-
Cl-7.3.3(Discharge performance at 0 °C)	-	15000	-
Cl-7.3.4(Discharge performance for rapid charge cells (R cells))	-	15000	-
Cl-7.4(Charge (capacity) retention)	-	10000	-
Cl-7.5.1.1(General)	-	0	-
Cl-7.5.1.2(Small prismatic, button and cylindrical cells not dimensionally interchangeable with primary cells)	-	20000	-
Cl-7.5.1.3.1(General)	-	15000	-
Cl-7.5.1.3.2(H or X cells)	-	5000	-
Cl-7.5.1.3.3(X cells)	-	5000	-
Cl-7.5.1.3.4(HR or XR cells)	-	5000	-
Cl-7.5.1.4(Cylindrical cells dimensionally interchangeable with primary cells)	-	5000	-
Cl-7.5.2.1(Small prismatic and button cells)	-	5000	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.3(LT, MT or HT cylindrical cells)	-	0	-
Cl-7.5.2.4(JT cylindrical cells)	-	0	-
Cl-7.5.2.5(LU, MU or HU cylindrical cells)	-	0	-
Cl-7.7.1(Small prismatic, L, M, H, X, LS or MS cylindrical, and button cells)	-	0	-
Cl-7.7.2(LT/LU, MT/MU or HT/HU cylindrical cells)	-	0	-
Cl-7.7.3(J cylindrical cells)	-	0	-
Cl-7.7.4(JT cylindrical cells)	-	0	-
Cl-7.7.5(R cylindrical cells)	-	0	-
Cl-7.8(Safety device operation)	-	0	-
Cl-7.9(Surface temperature limitation device operation (for S cell only))	-	0	-
Cl-7.10.1(Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries)	-	0	-
Cl-7.10.2(2 Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries (high recovery type))	-	0	-
Cl-7.11(Charge acceptance at +55 °C for LT, MT or HT cylindrical cells)	-	5000	-
Cl-7.12(Trickle charge acceptance for JT cylindrical cells)	-	5000	-
Cl-7.13.2(Measurement of the internal AC resistance)	-	2000	-
Cl-7.13.3(Measurement of the internal DC resistance)	-	2000	-
Cl-8 (Cl- 4.1 of IEC 61959(Vibration test)	-	5000	-
Cl-8 (Cl- 4.1 of IEC 61959(Open circuit voltages)	-	2000	-
Cl-8 (Cl- 4.2 of IEC 61959(Free fall test (cells and hard pack batteries only))	-	2000	-
Cl-8 (Cl- 4.2 of IEC 61959(Height of fall as a function of weight)	-	2000	-
Cl-8 (Cl- 5 of IEC 61959(Type approval)	-	0	-
Cl-9 (Cl- 8.1 of IEC 62133(General)	-	0	-
Cl-9 (Cl- 8.2 of IEC 62133(Small cell and battery safety information)	-	0	-
Cl-10.2.1(Type approval for small prismatic cells and button cells)	-	0	-
Cl-10.2.2(Type approval for cylindrical cells)	-	0	-
Cl-10.2.3(Type approval for batteries)	-	0	-
Cl-10.3(Batch acceptance)	-	0	-
Cl-4(Parameter measurement tolerances)	-	0	-
Cl-5.1(Cell designation)	-	0	-
Cl-5.3(Marking)	-	0	-
Cl-6.1.1(General)	-	0	-
Cl-6.1.2(Small prismatic cells)	-	0	-
Cl-6.1.3.1(Cells dimensionally interchangeable with primary cells)	-	0	-
Cl-6.1.3.2(cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-6.2(Button cells)	-	5000	-
Cl-6.3(9 V type nickel-metal hydride batteries)	-	5000	-
Cl-7.1(General)	-	5000	-
Cl-7.2(Charging procedure for test purposes)	-	5000	-
Cl-7.3.2.2(Discharge performance for cells at 20 °C)	-	5000	-
Cl-7.3.2.3(Discharge performance for batteries at 20 °C)	-	5000	-
Cl-7.3.2.4(Rated capacity (mAh) compliance test (example))	-	5000	-
Cl-7.3.3(Discharge performance at 0 °C)	-	5000	-
Cl-7.3.4(Discharge performance for rapid charge cells (R cells))	-	0	-
Cl-7.4(Charge (capacity) retention)	-	0	-
Cl-7.5.1.1(General)	-	0	-
Cl-7.5.1.2(Small prismatic, button and cylindrical cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-7.5.1.3.1(General)	-	0	-
Cl-7.5.1.3.2(H or X cells)	-	0	-
Cl-7.5.1.3.3(X cells)	-	0	-
Cl-7.5.1.3.4(HR or XR cells)	-	0	-
Cl-7.5.1.4(Cylindrical cells dimensionally interchangeable with primary cells)	-	0	-
Cl-7.5.2.1(Small prismatic and button cells)	-	0	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.3(LT, MT or HT cylindrical cells)	-	0	-
Cl-7.5.2.4(JT cylindrical cells)	-	0	-
Cl-7.5.2.5(LU, MU or HU cylindrical cells)	-	0	-
Cl-7.7.1(Small prismatic, L, M, H, X, LS or MS cylindrical, and button cells)	-	0	-
Cl-7.7.2(LT/LU, MT/MU or HT/HU cylindrical cells)	-	0	-
Cl-7.7.3(J cylindrical cells)	-	0	-
Cl-7.7.4(JT cylindrical cells)	-	0	-
Cl-7.7.5(R cylindrical cells)	-	0	-
Cl-7.8(Safety device operation)	-	0	-
Cl-7.9(Surface temperature limitation device operation (for S cell only))	-	0	-
Cl-7.10.1(Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries)	-	5000	-
Cl-7.10.2(2 Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries (high recovery type))	-	5000	-
Cl-7.11(Charge acceptance at +55 °C for LT, MT or HT cylindrical cells)	-	5000	-
Cl-7.12(Trickle charge acceptance for JT cylindrical cells)	-	5000	-
Cl-7.13.2(Measurement of the internal AC resistance)	-	2000	-
Cl-7.13.3(Measurement of the internal DC resistance)	-	2000	-
Cl-8 (Cl- 4.1 of IEC 61959)(Vibration test)	-	5000	-
Cl-8 (Cl- 4.2 of IEC 61959)(Free fall test (cells and hard pack batteries only))	-	5000	-
Cl. 9 (Cl. 7.2.1 of IEC 62133)(Low rate charging)	-	5000	-
Cl. 9 (Cl. 7.2.2 of IEC 62133)(Vibration)	-	5000	-
Cl. 9 (Cl. 7.2.3 of IEC 62133)(Case stress)	-	5000	-
Cl. 9 (Cl. 7.2.4 of IEC 62133)(Temperature cycling)	-	5000	-
Cl. 9 (Cl. 7.3.1 of IEC 62133)(Incorrect installation)	-	5000	-
Cl. 9 (Cl. 7.3.2 of IEC 62133)(External short circuit)	-	5000	-
Cl. 9 (Cl. 7.3.3 of IEC 62133)(Free fall)	-	2000	-
Cl. 9 (Cl. 7.3.4 of IEC 62133)(Mechanical shock)	-	5000	-
Cl. 9 (Cl. 7.3.5 of IEC 62133)(Thermal abuse)	-	5000	-
Cl. 9 (Cl. 7.3.6 of IEC 62133)(Crush)	-	5000	-
Cl. 9 (Cl. 7.3.7 of IEC 62133)(Low pressure)	-	5000	-
Cl. 9 (Cl. 7.3.8 of IEC 62133)(Overcharge)	-	5000	-
Cl. 9 (Cl. 7.3.9 of IEC 62133)(Forced discharge)	-	5000	-
Cl-9 (Cl- 8.1 of IEC 62133)(General)	-	0	-
Cl-9 (Cl- 8.2 of IEC 62133(Small cell and battery safety information)	-	0	-
10(Type approval and batch acceptance)	-	0	-

04 Jan, 2030

-
Included w.e.f. 25.04.2024

IS/IEC 62368 : Part 1 (2018)

Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	5000	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	5000	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	5000	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	5000	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	5000	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	5000	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	3000	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	6000	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	8000	-
Annex E, E.1, E.2, E.3(Test conditions)	-	5000	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	2000	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	3000	-
Annex I(Overvoltage categories)	-	2000	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	4000	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	3000	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	2000	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	2000	-
Annex. N(Electrochemical potentials)	-	2000	-
Annex. O(Measurement of creepage distances and clearances)	-	3000	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	3000	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	3000	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	3000	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	5000	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	1000	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	1000	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	1000	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	1000	-
10(Radiation)	-	1000	-
Annex C, C.1 & C.2(UV radiation)	-	1000	-
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	3000	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	5000	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	5000	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	5000	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	3000	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	3000	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	3000	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	3000	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	3000	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	3000	-
Annex E, E.1, E.2, E.3(Test conditions)	-	3000	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	3000	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	3000	-
Annex I(Overvoltage categories)	-	3000	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	3000	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	3000	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	3000	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	3000	-
Annex. N(Electrochemical potentials)	-	3000	-
Annex. O(Measurement of creepage distances and clearances)	-	3000	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	3000	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	3000	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	3000	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	3000	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	3000	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	3000	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	3000	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	3000	-
10(Radiation)	-	3000	-
Annex C, C.1 & C.2(UV radiation)	-	3000	-

04 Jan, 2030

-
Included w.e.f. 15.07.2024

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

330000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	50000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	25000	-
7.3.2("Discharge Performance at -20°C ")	-	25000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	25000	-
7.4(Charge (capacity) Retention and Recovery)	-	30000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	30000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	50000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	50000	-
7.7(Battery Internal Resistance)	-	20000	-
7.8(Electrostatic Discharge (ESD))	-	20000	-

04 Jan, 2030

-
Included w.e.f. 25.04.2024

IS 16048 : Part 1 (2021)

SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS PART 1: NICKEL-CADMIUM

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter measurement tolerances)	-	10000	-
5(Cell and battery designation and marking)	-	10000	-
6, Table no. 1,2,3and 4(Dimensions)	-	10000	-
7, Table no.5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,(Electrical tests)	-	80000	-
8(Mechanical tests)	-	20000	-
9(Safety requirements)	-	10000	-
10, Table no. 28, 29 , 30(Type approval and batch acceptance)	-	10000	-

04 Jan, 2030

-
Included w.e.f. 25.04.2024

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

875000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	55000	-
5.1(Mechanical Endurance)	-	55000	-
5.2(Charge efficiency)	-	53000	-
5.3(Deep discharge protection)	-	55000	-
5.4(Marking)	-	52000	-
5.5(Dafety)	-	53000	-
5.6(Documentation)	-	54000	-
6(Finctional Characteristics)	-	57000	-
7(General test conditions)	-	57000	-
8.1(Capacity test)	-	53000	-
8.2(Endurance test)	-	55000	-
8.3(Charge retention test)	-	53000	-
8.4(Cycle endurance in Photovoltaic application)	-	57000	-
8.5(Sulphation Test)	-	54000	-
8.6(Water loss test)	-	57000	-
8.7(Non spillability)	-	55000	-

04 Jan, 2030

-
Included w.e.f. 25.04.2024

IS 16822 (2019)

Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and Designation)	-	10000	-
6, 6.1, 6.2(Charging Procedures For Test Purposes)	-	50000	-
6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C)	-	20000	-
6.3.2(Discharge performance at Low Temperature)	-	20000	-
6.3.3(High Rate Permissible Current)	-	20000	-
6.4(Charge (Capacity) Retention and Recovery)	-	20000	-
6.5(Cell and Battery Internal Resistance)	-	20000	-
6.6(Endurance)	-	200000	-

04 Jan, 2030

-
Included w.e.f. 25.04.2024

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	-
7.1(Charging Procedures For Test Purposes)	-	50000	-
7.2.1(External Short-Circuit Test)	-	30000	-
7.2.2(Impact Test)	-	20000	-
7.2.3(Drop Test)	-	20000	-
7.2.4(Thermal Abuse Test)	-	30000	-
7.2.5(Overcharge Test)	-	30000	-
7.2.6(Forced Discharge Test)	-	30000	-
7.3.3(Propagation Test)	-	50000	-
8(Battery System Safety)	-	5000	-
9(Information For Safety)	-	5000	-
10(Marking and Designation)	-	5000	-
7.3.2(Internal short-circuit test)	-	20000	-

04 Jan, 2030

-
Included w.e.f. 16.04.2024

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	5000	up to 100Ah, post this 2000 for each 50Ah
5.2(Capacity)	-	6000	up to 100Ah, post this 2000 for each 50Ah
5.3(SOC Adjustment)	-	5000	up to 100Ah, post this 2000 for each 50Ah
6.2.1(Vibration)	-	8000	up to 100Ah, post this 2000 for each 50Ah
6.2.2(Mechanical Shock)	-	8000	up to 100Ah, post this 2000 for each 50Ah
6.2.3(Crush)	-	6000	up to 100Ah, post this 2000 for each 50Ah
6.3.1(High Temperature Endurance)	-	6000	up to 100Ah, post this 2000 for each 50Ah
6.3.2(Temperature Cycling)	-	7000	up to 100Ah, post this 2000 for each 50Ah
6.4.1(External Short Circuit)	-	6000	up to 100Ah, post this 2000 for each 50Ah
6.4.2(Overcharge)	-	7000	up to 100Ah, post this 2000 for each 50Ah
6.4.3(Forced Discharge)	-	6000	up to 100Ah, post this 2000 for each 50Ah
6.4.4(Internal short circuit test)	-	10000	up to 100Ah, post this 2000 for each 50Ah
6.4.3(Forced Discharge)	-	6000	up to 100Ah, post this 2000 for each 50Ah

04 Jan, 2030

-
Included w.e.f. 15.04.2024

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC INS Type A,C ST1,2 Class 1,2 Category -01, C1 & C2

68250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 g)(High voltage test at room temperature)	-	2000	10% discount to BIS
3.1(MATERIALS : CONDUCTOR)	-	200	10% discount to BIS
4.1.1(INSULATION : General Purjose Insulaiion)	-	200	10% discount to BIS
4.1.2(INSULATION : Heat Resisting Insulation)	-	500	10% discount to BIS
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	200	10% discount to BIS
6.1(MATERIALS : ARMGURING)	-	200	10% discount to BIS
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	200	10% discount to BIS
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	1000	10% discount to BIS
8.1(CONSTRUCTION : CONDUCTOR)	-	200	10% discount to BIS
8.2(CONSTRUCTION : CONDUCTOR)	-	200	10% discount to BIS
9.2(INSULATION : Thickness of Insulation)	-	500	10% discount to BIS
9.4(INSULATION : Application of Insulation)	-	200	10% discount to BIS
10.1(CORE IDENTIFICATION)	-	200	10% discount to BIS
10.2(CORE IDENTIFICATION)	-	200	10% discount to BIS
10.3(CORE IDENTIFICATION)	-	200	10% discount to BIS
10.3.1(Arrangement of Marking)	-	200	10% discount to BIS
11.1(LAYING UP OF CORES)	-	200	10% discount to BIS
12.1(INNER SHEATH)	-	500	10% discount to BIS
12.2(INNER SHEATH)	-	500	10% discount to BIS
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	10% discount to BIS
13.1.1(ARMOURING : Application)	-	200	10% discount to BIS
13.1.3(ARMOURING : Direction of lay )	-	200	10% discount to BIS
13.2(ARMOURING : Type of Armour)	-	200	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	500	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	200	10% discount to BIS
13.4(ARMOURING : Joints)	-	200	10% discount to BIS
13.5.1(ARMOURING : Resistance)	-	1000	10% discount to BIS
13.5.2(ARMOURING : Resistance)	-	1000	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1000	10% discount to BIS
14.1(OUTER SHEATH)	-	200	10% discount to BIS
14.3(OUTER SHEATH : Colour )	-	200	10% discount to BIS
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	10% discount to BIS
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	10% discount to BIS
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	10% discount to BIS
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	10% discount to BIS
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	10% discount to BIS
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	10% discount to BIS
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	10% discount to BIS
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	10% discount to BIS
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	10% discount to BIS
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1500	10% discount to BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1500	10% discount to BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1500	10% discount to BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	10% discount to BIS
15.1 d)4)(Hot deformation : Insulation )	-	1500	10% discount to BIS
15.1 d)4)(Hot deformation : Sheath )	-	1500	10% discount to BIS
15.1 d)5)( Loss of mass in air oven- Insulation )	-	4000	10% discount to BIS
15.1 d)5)( Loss of mass in air oven- sheath )	-	4000	10% discount to BIS
15.1 d)6)(Heat shock test- Insulation )	-	1000	10% discount to BIS
15.1 d)6)(Heat shock test- sheath )	-	1000	10% discount to BIS
15.1 d)7)(Thermal stability- insulation )	-	2000	10% discount to BIS
15.1 d)7)(Thermal stability- Sheath )	-	2000	10% discount to BIS
15.1 f)(High voltage test ( water immersion test ))	-	5000	10% discount to BIS
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	10% discount to BIS
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	10% discount to BIS
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	10% discount to BIS
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	10% discount to BIS
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	10% discount to BIS
16.4(Flammability Test)	-	2000	10% discount to BIS
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	200	10% discount to BIS
17.2(IDENTIFICATION : Cable Identification)	-	200	10% discount to BIS
17.3(IDENTIFICATION : Cable Code)	-	200	10% discount to BIS
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1500	10% discount to BIS
15.1 e)(Insulation resistance test : IR Constant )	-	1500	10% discount to BIS
16.5(Oxygen Index Test)	-	5000	10% discount to BIS
16.6(Flame Retardance Test on Single Cables)	-	4000	10% discount to BIS
16.7(Flame Retardance Test on Bunched Cables)	-	4000	10% discount to BIS
16.1(Temperature Index)	-	5000	10% discount to BIS
Cl No. 16.10(Smoke density test)	-	5000	10% discount to BIS
16.9(Test for Halogen Acid Gas Evolution)	-	4000	10% discount to BIS
Cl No. 16.10(Smoke density test)	-	5000	10% discount to BIS

04 Jan, 2030

-
Included w.e.f. 15.04.2024

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE ,FR, FR-LSH, ST2,Class:1, 2, Category -01, C1 & C2

69225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(HIGH VOLTAGE TEST )	-	2000	10% discount to BIS
3(CONDUCTOR: MATERIALS)	-	200	10% discount to BIS
4(INSULATION : MATERIALS)	-	200	10% discount to BIS
5.1(FILLER AND INNER SHEATH)	-	200	10% discount to BIS
6(ARMOURING)	-	200	10% discount to BIS
7(OUTER SHEATH)	-	200	10% discount to BIS
8.1(CONDUCTOR: CONSTRUCTION)	-	200	10% discount to BIS
8.2(PROTECTIVE BARRIER)	-	200	10% discount to BIS
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	200	10% discount to BIS
9.1(Insulation Applied by extrusicn)	-	200	10% discount to BIS
9.4(Application of Insulation)	-	200	10% discount to BIS
9.2(Thickness of Insulation - Average)	-	500	10% discount to BIS
9.3(Thickness of Insulation - Minimum)	-	500	10% discount to BIS
10.1(Core Identification)	-	200	10% discount to BIS
10.2(Core Identification- Neutral)	-	200	10% discount to BIS
10.3(Core Identification by number )	-	200	10% discount to BIS
10.4(Core Identification by number - Neutral )	-	200	10% discount to BIS
11(LAVING UP OF CORES)	-	200	10% discount to BIS
12.1 & 12.2(Inner sheath : Application)	-	200	10% discount to BIS
12.3(Thickness of Inner Sheath)	-	500	10% discount to BIS
13.1(Armouring: Application)	-	200	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	10% discount to BIS
15.1 a) iv)(Resistance test - Main conductor)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	10% discount to BIS
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	2000	10% discount to BIS
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1500	10% discount to BIS
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	10% discount to BIS
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	5000	10% discount to BIS
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	500	10% discount to BIS
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	500	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	10% discount to BIS
5.2(FILLER AND INNER SHEATH)	-	500	10% discount to BIS
14.1(Outer Sheath : Application)	-	500	10% discount to BIS
14.2(Colour of outer sheath)	-	200	10% discount to BIS
14.3(Thickness of outer sheath - AVERAGE)	-	500	10% discount to BIS
14.3(Thickness of outer sheath - minimum)	-	500	10% discount to BIS
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	2000	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	4000	10% discount to BIS
15.1 e) vi) (Sheath : Heat shock test)	-	1000	10% discount to BIS
15.1 e) v) (Sheath : Hot deformation)	-	1500	10% discount to BIS
15.1 e) vii) (Sheath : Thermalstability)	-	3000	10% discount to BIS
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	10% discount to BIS
16.3(FLAMMABILITY TEST : Period of Burning )	-	2000	10% discount to BIS
16.3(FLAMMABILITY TEST : Unaffected length )	-	2000	10% discount to BIS
17.1(Manufacturer'. identification)	-	200	10% discount to BIS
17.2(cable Indentification )	-	200	10% discount to BIS
13.1.3(Armouring: Direction of Lay )	-	500	10% discount to BIS
13.2(Type of armour )	-	200	10% discount to BIS
13.4(Armour: Joint)	-	200	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1500	10% discount to BIS
13.5(Armouring : Resistance Test)	-	1500	10% discount to BIS
13.1.2(Armouring: Coverage )	-	500	10% discount to BIS
15.4 (a)(Cold bend)	-	1000	10% discount to BIS
15.4 (b)(Cold impact)	-	1000	10% discount to BIS
16.9(Oxygen Index Test)	-	5000	10% discount to BIS
16.1(Flame Retardance Test on Single Cables)	-	5000	10% discount to BIS
16.11(Flame Retardance Test on Bunched Cables)	-	5000	10% discount to BIS
Cl No. 16.15(Smoke density test)	-	5000	10% discount to BIS
16.13(Test for Halogen Acid Gas Evolution)	-	4000	10% discount to BIS
16.14(Temperature Index)	-	5500	10% discount to BIS

04 Jan, 2030

-
Included w.e.f. 15.04.2024

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

Y-1100 V A,C,D, FR, FR-LSH 0.5 to 10 & 16 sqmm to above

31680 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Legibility)	-	200	10% discount to BIS
11.1(Durability)	-	200	10% discount to BIS
11(Identification)	-	200	10% discount to BIS
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3500	10% discount to BIS
10.4(Flammability test- Unaffected portion)	-	1500	10% discount to BIS
table 1 e) 3) (IR constant- max. Temp)	-	1500	10% discount to BIS
table 1 e) 3) (IR constant- Room temp )	-	1500	10% discount to BIS
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1500	10% discount to BIS
table 1 e) 3) (Volume Resistivity - Room temp )	-	1500	10% discount to BIS
10.2(HV (room temperature))	-	2000	10% discount to BIS
10.1(HV (water immersion))	-	5000	10% discount to BIS
Table 1 iii) d) 9)(Cold impact for sheath)	-	1000	10% discount to BIS
Table 1 iii) d) 8)(Cold bend for sheath)	-	1000	10% discount to BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	10% discount to BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	10% discount to BIS
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	2500	10% discount to BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	2500	10% discount to BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1500	10% discount to BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1500	10% discount to BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1000	10% discount to BIS
10.8(Smoke density rating)	-	5000	10% discount to BIS
10.5(Oxygen index)	-	5000	10% discount to BIS
10.7(Temperature index)	-	5000	10% discount to BIS
10.6(Halogen evolution)	-	4000	10% discount to BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	3000	10% discount to BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	3000	10% discount to BIS
4.2(Conductor resistance test)	-	1000	10% discount to BIS
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	1000	10% discount to BIS
8.3(Thickness of Sheath)	-	500	10% discount to BIS
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1500	10% discount to BIS
Table 1 iii) c) 3)(Elongation (After ageing))	-	1500	10% discount to BIS
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	200	10% discount to BIS
Table 1 iii) c) 3)(TS variation)	-	200	10% discount to BIS
Table 1 iii) c) 3)(Elongation variation)	-	200	10% discount to BIS
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	1500	10% discount to BIS
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	1500	10% discount to BIS
Table 1 iii) d) 3)(Sheath- TS variation)	-	1000	10% discount to BIS
9(Overall dimensions)	-	500	10% discount to BIS
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	500	10% discount to BIS
12.0(Core identification)	-	200	10% discount to BIS
4.1(Conductor - Material)	-	200	10% discount to BIS
Table 2, IS 8130(No fo wire in a conductor)	-	200	10% discount to BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	1500	10% discount to BIS
4.1(Annealing test (for copper))	-	1000	10% discount to BIS
4.1(Wrapping test (for Al))	-	500	10% discount to BIS
5.3(Thickness of Insulation)	-	500	10% discount to BIS
8.3(Minimum thickness of Sheath)	-	500	10% discount to BIS
8.3(Avarage thickness of Sheath)	-	500	10% discount to BIS
5.3(Minimum thickness of insulation)	-	500	10% discount to BIS
5.3(Avarage thickness of insulation)	-	500	10% discount to BIS
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	200	10% discount to BIS
9.1(Ovality)	-	200	10% discount to BIS
Table 1(Category Code)	-	200	10% discount to BIS

04 Jan, 2030

-
Included w.e.f. 15.04.2024

Bureau of Indian Standards

The National Standards Body of India

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

S-1, GNEPIP Surajpur Industrial Area, Kasna Phase V, Greater Noida, Gautam Buddha Nagar, Gautam Buddha Nagar, Uttar Pradesh, 201308

9873571512 qa.gn@xoin.eurofinsasia.com

Scope List